CHIPHY ‎SF214-107(G) 3 Level Dimming Foot Adjusting Switch User Guide

Press
Press for the 1st time
Turn on the light
(100% brightness)
Press for the 2nd time
Turn off the lights
Press for the 3rd time
Turn on the light
(50% brightness)
Press for the 4th time
Turn off the lights
Press for the 5th time
Turn on the light
(10% brightness)
Press for the 6th time
Turn off the lights
Press for the 7th time
Turn on the light
(100% brightness)
1)Press 6 times for a loop.
2)In the off state, if the interval time is no
more than 3 seconds, then the lights,
The tool will switch gears cyclically, such
as leftpicture;
3)In the off state, if the interval time
exceeds 3 seconds, then the next time
turn on the light, the lamp will be cut to
100% bright Spend;
4)Hear the key press while pressing it,
If the sound is normal, it means that the
button has been pressed.
After the work is in place, release the
button,At this point, a key operation has
been completed;
5)Press the button to control the strength;
so as not to step on the button;