Bosch | MIC-72 | User manual | MIC Series 612 Thermal Camera


Add to my manuals
9 Pages

advertisement

Bosch | MIC-72 | User manual | MIC Series 612 Thermal Camera | Manualzz

Video | MIC Series 612 Thermal Camera

MIC Series 612 Thermal Camera

www.boschsecurity.com

u

User-switchable (single) or simultaneous (dual) thermal/optical video output u

Two thermal imager options: standard resolution with 35 mm (includes on-screen temperature display with alarm) or high resolution with 50 mm lens, u

Human detection range up to 1500 m (almost twice the range of previous MIC thermal models) u

Video and control over IP when powered by MIC IP

Power Supply (sold separately) u

Robust design rated to an industry-leading IP68/

NEMA 6P/IK10

The MIC Series 612 camera has been designed to offer an extremely reliable, robust, and high-quality surveillance solution for security applications that demand the very best performance. Precision engineered to exacting standards, the camera offers the most ruggedized dual optical/thermal image capture solution available on the market today.

When powered by a MIC IP Power Supply, the MIC camera becomes an IP-enabled device with extra features such as Intelligent Video Analysis (IVA), and the ability to record video on a network-attached RAID iSCSI storage device or locally on a user-supplied SD or SDHC card (32 GB maximum). Operators can select either the visible video image or the thermal video image through the network connection provided by the MIC IP Power Supply. The optional “hybrid” operation provides video and control of the MIC camera over both analog (Bilinx over coax) and IP connections simultaneously. For more information, see the MIC Series IP Power Supply datasheet on the online Product Catalog at boschsecurity.com.

System overview

High-performance camera with simultaneous thermal/optical video output

Image control and quality are integral aspects of any

PTZ camera, and the MIC612 delivers. A high-quality day/night camera core with 36x optical zoom lens and a full 12x digital zoom, and a high-performance, uncooled thermal imaging core sit side-by-side within the housing. Each MIC612 has two video outputs – one for the optical camera, and one that is user-switchable between the optical camera and the thermal imager.

The optical camera provides 550 TVL of horizontal resolution for outstanding clarity and image detail, and incorporates Wide Dynamic Range (WDR) that dramatically improves the dynamic range by 128 times and results in clear image reproduction in extreme high-contrast environments. Features of AutoScaling

(proportional zoom) and AutoPivot (automatically rotates and flips the camera) ensure optimal control.

Day/night capabilities and outstanding sensitivity make the MIC612 an exceptional performer in all lighting conditions. In low light, the optical camera automatically switches from color to monochrome by

2 | MIC Series 612 Thermal Camera removing the IR filter to boost sensitivity, while maintaining superior image quality. For operation in the darkest conditions, the SensUp control feature automatically reduces the shutter speed to as little as one second. This increases sensitivity by more than 50 times. In addition to low light applications, the optical camera is also an exceptional performer when viewing under a sodium vapor lamp (for example, a street lamp or tunnel lamp) which normally gives a yellowish tint to images. The camera automatically compensates and restores objects to their original color.

The thermal imager has user-selectable color options including White Hot, Black Hot, and many others, and built-in sun protection that allows the camera to selfheal if pointed directly at the sun. Standard-resolution models include a user-selectable on-screen temperature display (spot meter) feature. These models allow users to set high or low thermal temperature limits and then to use the measured temperature value from the spot meter to trigger alarm functions based on those limits.

Examples of optical and thermal modes

Optical image / Thermal image, White Hot mode;

(middle) Black Hot / Sepia; (bottom) Globow / Rainbow

Robust design rated to an industry-leading IP68/

NEMA 6P

Subjected and certified to rigorous dust and immersion tests (IP68 and NEMA 6P), MIC Series cameras are perfectly suited for installation in even the most unforgiving environments. Reliable ‘O’ ring seals completely protect the internal components from the external environment, meaning that there is no need to pressurize the camera. To guarantee the seal, the factory subjects each MIC camera to a 100% leak test before shipping. In addition, the cameras’ aluminum construction is protected from corrosion by two different processes: first, the cameras receive a coating of Alodine 5200, a chromate-free conversion coating of aluminum that is used in the aerospace and defense industries where a protective layer is required to improve corrosion resistance. Second, they receive a robust, powder coat layer of paint.

Functions

Multi-protocol operation

The MIC612 incorporates Bosch’s standard controller interface supporting familiar on-screen menus and multiple protocols, including Bosch “Biphase (OSRD),”

“Bilinx,” and Pelco “P” and “D.” This makes it simple to integrate and use the camera within systems that already use Bosch AutoDome cameras and systems.

High performance PTZ operations

Brushless motor technology ensures ultra-reliable operation with full 360° continuous rotation pan for exceptional viewing capability. The camera supports

99 pre-positions and two styles of Guard Tours: Preset and Record/Playback. The preset tour has capability for up to 99 pre-positions with a configurable dwell time between pre-positions, and can be customized as to the order and frequency each preset is visited. The camera also provides support for two recorded tours, which have a combined duration of 15 minutes of movements. These are recorded macros of an operator’s movements, including pan, tilt, and zoom activities, and can be played back in a continuous manner.

Superior privacy masking and Image Stabilization

The MIC612 has 24 individual privacy masks, with up to eight displayed in the same scene. Unlike conventional privacy masks, these can be programmed with three, four, or even five corners each to cover more complex shapes. Each mask changes size and shape smoothly and quickly, ensuring that the covered object cannot be seen. Each mask can appear in black, white, or blurred. Blurred is useful when privacy is an issue, but determining the presence of motion is still required.

As PTZ cameras continue to increase their optical zoom capabilities, image stabilization becomes critical to eliminate movement caused by unstable camera mounts. A mere quarter-inch of movement of the camera mount can shift the field of view by more than

6 m (20 feet) when the camera is zoomed to a high value. This can render images unusable. Image stabilization algorithms in the optical camera reduce camera shake in both the vertical and horizontal axis, resulting in exceptional image clarity (pixel displacement up to +/- 10% for frequencies up to 10

Hz) without reducing camera sensitivity.

Easy installation and servicing

The MIC612 is compatible with all MIC Series brackets and control equipment for easy installation, integration, and operation. These brackets, as well as connection cables and power supply units for the

3 | MIC Series 612 Thermal Camera camera, are sold separately. The camera can be installed upright or inverted. No matter the installation position, the camera will operate faultlessly.

Bosch’s Configuration Tool for Imaging Devices

(CTFID) allows users to control the PTZ, change camera settings, and update firmware from remote locations without need for additional wiring.

The camera has advanced built-in diagnostics to simplify service and minimize downtime. Using the Onscreen Display (OSD), a technician can quickly and easily check critical parameters (such as internal temperature) to verify that the camera is functioning within acceptable operating limits.

Integrated long-life silicone wiper

Thanks to its integrated wiper, the MIC612 is able to capture the highest possible quality image regardless of the weather.

Certifications and approvals

Electromagnetic

Compatibility (EMC)

Safety

Complies with FCC part 15, ICES-003, and

CE regulations including EN 50130-4:

2011, EN 55022: 2010, EN 50121-4:

2006, EN 61000-3-2:2006 + A2:2009,

EN 61000-3-3:2008

Complies with CE regulations, UL, EN, and

IEC standards 60950-1:2006 / A11:2009

= A1:2010 + A12:2011

IP68, NEMA 6P Ingress Protection

Rating/Standard

IK Code IK10

Installation/configuration notes

The table below identifies the resolution and the thermal frame rate for the various model mixes of MIC612.

Model

MIC612TI-

MIC612TF-

MIC612HI-

MIC612HF-

Resolution

Standard

Standard

High

High

Frame Rate

7.5Hz (NTSC)

8.3Hz (PAL)

25Hz (PAL)

30Hz (NTSC)

7.5Hz (NTSC)

8.3Hz (PAL)

25Hz (PAL)

30Hz (NTSC)

Notice

Models of 25 Hz or 30 Hz require specific export licenses--one license per customer--arranged prior to the camera being built. MIC612TF- models require an export license from the U.S. Department of Commerce. MIC612HF- models require an export license from the U.S. Department of State.

For more information, contact your local Bosch

Security Systems Customer Service Center.

Technical specifications

Optical Camera Core, 36x Day/Night

Imager

Resolution/

Effective

Picture Elements

Lens

¼ in.-type EXview HAD CCD (progressive scan)

PAL: Approximately 440,000; 752(H) x 582(V)

NTSC: Approximately 380,000; 768(H) x 494(V)

Zoom Movement

Speed

Focus

Iris

Field of View

(FOV)

Video Output

Gain Control

36x Zoom (3.4 mm to 122.4 mm)

F1.6 to F4.5

4.0 seconds (optical Wide to optical TELE)

6.2 seconds (optical wide to digital TELE)

Automatic with manual override

Automatic with manual override

1.7º to 57.8º

Aperture

Correction

Digital Zoom

Horizontal

Resolution

Sensitivity ¹

Day Mode

SensUp Off

SensUp On

(NTSC: 1/4s,

15X;

PAL 1/3s,

16.7X)

1.0 Vp-p, 75 Ohm

Auto/Manual/Max.

(-3 dB to +28 dB, 2 dB steps)

Horizontal and vertical

12x

550 TVL (NTSC, PAL) typical

30 IRE

0.66 lux

0.04 lux

50 IRE

1.4 lux

0.1 lux

Night Mode

SensUp Off

SensUp On

(NTSC: 1/4s,

15X;

PAL 1/3s,

16.7X)

0.104 lux

0.0052 lux

0.209 lux

0.0103 lux

Filter

Electronic

Shutter Speed

Wide Dynamic

Range (WDR)

Signal-to-Noise

Ratio (SNR)

Automatic IR cut filter

1/1 to 1/10,000 seconds (22 steps)

92 dB (50 dB with WDR Off)

>50 dB

White Balance 2000 K to 10,000 K

1 Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max

AGC

4 | MIC Series 612 Thermal Camera

Thermal Camera Core, Standard Resolution (35 mm)

Imager

Resolution/Effective

Picture Elements

Lens

Field of View (FOV)

Spectral Response

Thermal Sensitivity

(NEDT)

Digital Zoom

Focus

Performance Range

Focal Plane Array (FPA), un-cooled

Vanadium Oxide microbolometer with userselectable on-screen temperature display

(spot meter) and alarm

- 7.5 Hz NTSC, 8.3 Hz PAL

- 30 Hz NTSC, 25 Hz PAL; US export license required.

PAL: 320 x 256

NTSC: 320 x 240

35 mm (F1.2)

13° x 10°

7.5 to 13.5 μm

<50mk f/1.0

Detection

Recognition

Identification

User-selectable

AGC Modes

User-selectable

Thermal Modes

(Color Options)

2x, 4x

Factory-set at infinity focus

Human 1.8 x 0.5 m

(5.9 x 1.6 ft)

Object 2.3 x 2.3 m

(7.5 x 7.5 ft)

800 m (2625 ft)

200 m (656 ft)

105 m (344 ft)

Outdoor (default mode)

Indoor

Low Contrast

290 m (951 ft)

White Hot (default mode)

Black Hot

Fusion

Rainbow

Globow

Ironbow 1

Ironbow 2

Sepia

Color 1

Color 2

IceFire

Rain

2250 m (7382 ft)

590 m (1936 ft)

Thermal Camera Core, High Resolution (50 mm)

Imager

Resolution/Effective

Picture Elements

Lens

Field of View (FOV)

Spectral Response

Thermal Sensitivity

(NEDT)

Focal Plane Array (FPA), un-cooled Vanadium

Oxide microbolometer

- 7.5 Hz NTSC, 8.3 Hz PAL

- 30 Hz NTSC, 25 Hz PAL; US export license required.

PAL: 640 x 512

NTSC: 640 × 480

50 mm (F1.2)

12.4° x 9.9°

7.5 to 13.5 μm

<50mk f/1.0

Digital Zoom

Focus

Performance Range

Detection

Recognition

Identification

User-selectable

AGC Modes

User-selectable

Thermal Modes

(Color Options)

2x, 4x

Factory-set at infinity focus

Human 1.8 x 0.5 m

(5.9 x 1.6 ft)

Object 2.3 x 2.3 m

(7.5 x 7.5 ft)

1500 m (4921 ft)

380 m (1247 ft)

190 m (623 ft)

Outdoor (default mode)

Indoor

Low Contrast

White Hot (default mode)

Black Hot

Fusion

Rainbow

Globow

Ironbow 1

Ironbow 2

Sepia

Color 1

Color 2

IceFire

Rain

RedHot

GreenHot

3900 m (12,795 ft)

1060 m (3478 ft)

540 m (1772 ft)

Mechanical

Drive Unit

Pan Range

Tilt Angle

Tilt Range

Variable Speed

Pre-Position Speed

Preset Accuracy

Proportional Pan / Tilt to

Zoom

Audible Noise

Brushless integral pan/tilt motor drive

360° continuous rotation

180°

-58° to +90°

Pan: 0.2° to 72° per second (variable)

Tilt: 0.2° to 90° per second (variable)

120°/second

±0.30° (typical)

Yes

<66dB

Electrical

Input Voltage (dual source)

Power Consumption

Input Current

18 VAC, ±10%, 50/60 Hz

Camera: 20.5 VA

Heater: 8.5 VA

Total: 29 VA

Camera: 1.1 A

Heater: 0.5 A

Miscellaneous

Sectors / Titling

Privacy Masking

16 independent sectors, each with 20-character title

24 individually-configurable privacy masks

5 | MIC Series 612 Thermal Camera

Prepositions

Guard Tours

99, each with 20-character title

Recorded Tours - two (2), total duration 15 minutes

Preset Tours – one (1), consisting of up to 99 scenes, consecutively, and one (1) customized up to 99 scenes

RS-485, Bilinx (coax) Camera Setup /

Control

Communications

Protocols

Washer Drive

Supported

Languages

Bosch (Bilinx, OSRD), Pelco D/P

Bosch OSRD requires use of converter device

(MIC-BP3 or MIC-BP4, sold separately).

(Bicom/Bilinx support on visible channel only.)

Optional washer kit (MIC-WKT Kit used with the appropriate HAC-WAS washer pump)

English, Czech*, Dutch, French, German, Italian,

Portuguese, Russian*, Spanish

* Available with separate language upload

User Connections

Power

Control Data

Video

Alarm Inputs

Relay Outputs

Via composite cable (sold separately)

RS-485 (Twisted pair; Simplex, half and full duplex operation via composite cable)

Biphase ±

(Optional; requires MIC Biphase module with external power supply.)

Dual coaxial via composite cable (sold separately)

(Optical and optical/thermal cameras selectable.)

One (1) tamper input (eight (8) additional inputs possible with optional alarm card)

Two (2) relay outputs and washer relay output only with optional alarm card

Tamper switch (ground connection) Alarm

Communication

Software CTFID software allows direct connection to a USBequipped PC via the MIC Series PSU over a full duplex to provide access to all camera functions and useful diagnostic tools.

Environmental

Ingress Protection

Rating/Standard

Operating Temperature

(with heater)

Cold Start-up

Temperature

IP68/NEMA 6P

-40 °C to +60 °C (-40 °F to +140 °F)

Storage Temperature

Humidity

Wind Load

(Estimated)

-40 °C (-40 °F)

(Requires 30-minute warm-up prior to PTZ operations.)

-40 °C to +70 °C (-40 °F to +158 °F)

0-100%

240 kph (150 mph) (sustained)

Camera: 517 N (116 lbf)

Wall Mount: 130 N (29 lbf)

Effective Projected Area (EPA):

Vibration

Shock

IK Code

Camera: 0.192 m² / 2.06 ft²

Wall Mount: 0.0483 m² / 0.52 ft²

IEC 60068-2-6, Test Fc: Vibration

(operational), 10m/s² (1.0g)

IEC 60068-2-27, Test Ea: Shock, 30g

IK10

Construction

Dimensions

(W x H x D)

Weight

Viewing Window

267 mm x 452 mm x 201 mm

(10.5 in. x 17.8 in. X 7.9 in.)

10.66 kg (23.50 lb)

(including 4-in. pitch circle diameter (PCD) base)

Tempered flat glass (optical) and germanium covering (thermal)

Machined aluminum Construction

Material

Standard Colors

Standard Finish

Window Wiper

Heater

Sunshield

Black (RAL9005), White (RAL9010);

Grey (RAL9006, available in specific regions)

Alodine 5200 surface treatment with powder coat paint, sand finish

Standard, long-life silicone wiper

Standard

Optional; sold separately

Dimensional Drawings

267.00

mm

(10.5 in.)

452.20

mm

(17.8 in.)

201.25

mm

(7.9 in.)

181.00

mm

(7.13 in.) mm

(in.)

6 | MIC Series 612 Thermal Camera

Ordering information

MIC-612TIALB36N

PTZ, dual thermal/optical camera, NTSC, Black, 36x optical zoom, 320x240 thermal picture elements, 7.5

Hz thermal imager frame rate, 35 mm thermal lens.

Order number MIC-612TIALB36N

MIC-612TIALW36N

PTZ, dual thermal/optical camera, NTSC, White, 36x optical zoom, 320x240 thermal picture elements, 7.5

Hz thermal imager frame rate, 35 mm thermal lens.

Order number MIC-612TIALW36N

MIC-612TIALB36P

PTZ, dual thermal/optical camera, PAL, Black, 36x optical zoom, 320x256 thermal picture elements, 8.3

Hz thermal imager frame rate, 35 mm thermal lens.

Order number MIC-612TIALB36P

MIC-612TIALW36P

PTZ, dual thermal/optical camera, PAL, White, 36x optical zoom, 320x256 thermal picture elements, 8.3

Hz thermal imager frame rate, 35 mm thermal lens.

Order number MIC-612TIALW36P

MIC-612TIALG36P

PTZ, dual thermal/optical camera, PAL, Grey, 36x optical zoom, 320x256 thermal picture elements, 8.3

Hz thermal imager frame rate, 35 mm thermal lens.

Order number MIC-612TIALB36P

MIC-612TFALB36N

PTZ, dual thermal/optical camera, NTSC, Black, 36x optical zoom, 320x240 thermal picture elements, 30

Hz thermal imager frame rate, 35 mm thermal lens.

Requires U.S. Department of Commerce export license--one license per customer--arranged prior to camera being built.

Order number MIC-612TFALB36N

MIC-612TFALW36N

PTZ, dual thermal/optical camera, NTSC, White, 36x optical zoom, 320x240 thermal picture elements, 30

Hz thermal imager frame rate, 35 mm thermal lens.

Requires U.S. Department of Commerce export license--one license per customer--arranged prior to camera being built.

Order number MIC-612TFALW36N

MIC-612TFALD36N

PTZ, dual thermal/optical camera, NTSC, Sand, 36x optical zoom, 320x240 thermal picture elements, 30

Hz thermal imager frame rate, 35 mm thermal lens.

Requires U.S. Department of Commerce export license--one license per customer--arranged prior to camera being built.

Order number MIC-612TFALG36N

MIC-612TFALB36P

PTZ, dual thermal/optical camera, PAL, Black, 36x optical zoom, 320x256 thermal picture elements, 25

Hz thermal imager frame rate, 35 mm thermal lens.

Requires U.S. Department of Commerce export license--one license per customer--arranged prior to camera being built.

Order number MIC-612TFALB36P

MIC-612TFALW36P

PTZ, dual thermal/optical camera, PAL, White, 36x optical zoom, 320x256 thermal picture elements, 25

Hz thermal imager frame rate, 35 mm thermal lens.

Requires U.S. Department of Commerce export license--one license per customer--arranged prior to camera being built.

Order number MIC-612TFALW36P

MIC-612TFALG36P

PTZ, dual thermal/optical camera, PAL, Grey, 36x optical zoom, 320x256 thermal picture elements, 25

Hz thermal imager frame rate, 35 mm thermal lens.

Requires U.S. Department of Commerce export license--one license per customer--arranged prior to camera being built.

Order number MIC-612TFALG36P

MIC-612HIALB36N

PTZ, dual thermal/optical camera, NTSC, Black, 36x optical zoom, 640x480 thermal picture elements, 7.5

Hz thermal imager frame rate, 50 mm thermal lens.

Order number MIC-612HIALB36N

MIC-612HIALB36P

PTZ, dual thermal/optical camera, PAL, Black, 36x optical zoom, 640x512 thermal picture elements, 8.3

Hz thermal imager frame rate, 50 mm thermal lens.

Order number MIC-612HIABL36P

MIC-612HIALW36P

PTZ, dual thermal/optical camera, PAL, White, 36x optical zoom, 640x512 thermal picture elements, 8.3

Hz thermal imager frame rate, 50 mm thermal lens.

Order number MIC-612HIALW36P

MIC-612HIALD36P

PTZ, dual thermal/optical camera, PAL, Sand, 36x optical zoom, 640x512 thermal picture elements, 8.3

Hz thermal imager frame rate, 50 mm thermal lens.

Order number MIC-612HIALD36P

MIC-612HFALB36N

PTZ, dual thermal/optical camera, NTSC, Black, 36x optical zoom, 640x480 thermal picture elements, 30

Hz thermal imager frame rate, 50 mm thermal lens.

Requires an export license--one license per customer-from the U.S. Department of State prior to camera being built.

Order number MIC-612HFALB36N

7 | MIC Series 612 Thermal Camera

MIC-612HFALB36P

PTZ, dual thermal/optical camera, PAL, Black, 36x optical zoom, 640x512 thermal picture elements, 25

Hz thermal imager frame rate, 50 mm thermal lens.

Requires an export license--one license per customer-from the U.S. Department of State prior to camera being built.

Order number MIC-612HFALB36P

MIC-612HFALW36P

PTZ, dual thermal/optical camera, PAL, White, 36x optical zoom, 640x512 thermal picture elements, 25

Hz thermal imager frame rate, 50 mm thermal lens.

Requires an export license--one license per customer-from the U.S. Department of State prior to camera being built.

Order number MIC-612HFALW36P

MIC-612HFALD36P

PTZ, dual thermal/optical camera, PAL, Sand, 36x optical zoom, 640x512 thermal picture elements, 25

Hz thermal imager frame rate, 50 mm thermal lens.

Requires an export license--one license per customer-from the U.S. Department of State prior to camera being built.

Order number MIC-612HFALD36P

Accessories

MIC Thermal Cable 2M

2 meter (6.56 ft) composite cable with plug for power, data and video for MIC Series thermal cameras

Order number MIC-THERCBL-2M

MIC Thermal Cable 10M

10 meter (32.81 ft) composite cable with plug for power, data and video for MIC Series thermal cameras

Order number MIC-THERCBL-10M

MIC Thermal Cable 20M

20 meter (62.62 ft) composite cable with plug for power, data and video for MIC Series thermal cameras

Order number MIC-THERCBL-20M

MIC Thermal Cable 25M

25 meter (82.02 ft) composite cable with plug for power, data and video for MIC Series thermal cameras

Order number MIC-THERCBL-25M

MIC-24PSU-2 MIC Power Supply Unit, 24VAC, 50/60 Hz

24 VAC, 50/60 Hz power supply with two video outputs for MIC Series cameras.

Order number MIC-24PSU-2

MIC-115PSU-2 MIC Power Supply Unit, 120VAC, 50/60

Hz

115 VAC, 50/60 Hz power supply with two video outputs for MIC Series cameras.

Order number MIC-115PSU-2

MIC-240PSU-2 MIC Power Supply Unit, 230 VAC, 50/60

HZ

230 VAC, 50/60 Hz power supply with two video outputs for MIC Series cameras.

Order number MIC-240PSU-2

MIC IP Power Supply 115 VAC

115 VAC, 50/60 Hz, IP-enabled power supply for MIC

Series cameras

Order number MIC-IP-PS-115

MIC IP Power Supply 230 VAC

230 VAC, 50/60 Hz, IP-enabled power supply for MIC

Series cameras

Order number MIC-IP-PS-230

MIC IP Power Supply 24 VAC

24 VAC, 50/60 Hz, IP-enabled power supply for MIC

Series cameras

Order number MIC-IP-PS-24

MIC-DCA-BD Deep Conduit Adapter, Black

Deep conduit adapter for 4 in. PCD base, black sand finish (RAL9005)

Order number MIC-DCA-BD

MIC-DCA-WD Deep Conduit Adapter, White

Deep conduit adapter for 4 in. PCD base, white sand finish (RAL9010)

Order number MIC-DCA-WD

MIC-DCA-GD Deep Conduit Adapter, Grey

Deep conduit adapter for 4 in. PCD base, grey sand finish (RAL 9006), for MIC-612xxxxD36x series

Order number MIC-DCA-GD

MIC-SCA-BD Shallow Conduit Adapter, Black

Shallow conduit adapter for a MIC-WMB, a MIC-PMB, or a MIC-SPR, black sand finish (RAL9005)

Order number MIC-SCA-BD

MIC-SCA-WD Shallow Conduit Adapter, White

Shallow conduit adapter for a MIC-WMB, a MIC-PMB, or a MIC-SPR mount, white sand finish (RAL9010)

Order number MIC-SCA-WD

MIC-SCA-GD Shallow Conduit Adapter, Grey

Shallow conduit adapter for a MIC-WMB, a MIC-PMB, or a MIC-SPR, grey sand finish (RAL 9006), for

MIC-612xxxxD36x series

Order number MIC-SCA-GD

MIC-SPR-BD Spreader Plate, Black

Aluminum spreader plate suitable for brickwork surface mounting, black sand finish (RAL9005)

Order number MIC-SPR-BD

MIC-SPR-WD Spreader Plate, White

Aluminum spreader plate suitable for brickwork surface mounting, white sand finish (RAL9010)

Order number MIC-SPR-WD

8 | MIC Series 612 Thermal Camera

MIC-SPR-GD Spreader Plate, Grey

Aluminum spreader plate suitable for brickwork surface mounting, grey sand finish (RAL 9006), for

MIC-612xxxxD36x series

Order number MIC-SPR-GD

MIC-CMB-BD Corner Mount Bracket, Black

Corner mount bracket, black sand finish (RAL9005)

Order number MIC-CMB-BD

MIC-CMB-WD Corner Mount Bracket, White

Corner mount bracket, white sand finish (RAL9010)

Order number MIC-CMB-WD

MIC-WMB-BD Wall Mount Bracket, Black

Wall mount bracket, black sand finish (RAL9005)

Order number MIC-WMB-BD

MIC-WMB-WD Wall Mount Bracket, White

Wall mount bracket, white sand finish (RAL9010)

Order number MIC-WMB-WD

MIC-WMB-GD Wall Mount Bracket, Grey

Wall mount bracket, grey sand finish (RAL 9006), for

MIC-612xxxxD36x series

Order number MIC-WMB-GD

MIC-WMB-ULTRA Wall Mount Bracket, Light Stone (RAL

9006)

Wall Mount Bracket, Light Stone (RAL 9006) for

MIC-612xxxxD36x series.

Order number MIC-WMB-ULTRA

MIC-PMB Pole Mount Bracket

Pole mount bracket (includes 2 x 455 mm stainless steel banding straps for pole diameters 75 to 145 mm)

Order number MIC-PMB

MICTHERSUNSHLD Sunshield for MIC Thermal Cameras

Sunshield kit for MIC Thermal Cameras, white

Order number MICTHERSUNSHLD

MICTHERSUNSHLDD Sunshield for MIC Thermal Camera for ULTRA

Sunshield kit for MIC Thermal Cameras, desert sand color, for MIC-612xxxxD36x series.

Order number MICTHERSUNSHLDD

MIC-BP3 Biphase Converter

Biphase converter for IR power supplies or non-IR power supplies without a free expansion slot available

Order number MIC-BP3

MIC-BP4 Biphase Converter

Biphase converter for non-IR versions of MIC series power supply units

Order number MIC-BP4

MIC-ALM Alarm and Washer Pump Drive Card

8 Input alarm and washer pump drive card for PSU

(Not for IR PSU). Requires washer pump, purchase separately.

Order number MIC-ALM

MIC-WKT Washer Kit

Washer kit for non-infrared MIC camera models

(includes washer pump drive card, washer nozzle and mounting brackets for wall and 4 in. PCD base).

Requires washer pump, purchase separately.

Order number MIC-WKT

MIC-412-RWAC Replacement Wiper Assembly for

MIC612 and MIC412, Silver

Replacement silicone wiper assembly (single wiper blade and associated hardware) for MIC612 and

MIC412 cameras; silver.

Order number MIC-412-RWAC

MIC-412-RWAB Replacement Wiper Assembly for

MIC612 and MIC412, Black

Replacement silicone wiper assembly (single wiper blade and associated hardware) for MIC612 and

MIC412 cameras; black.

Order number MIC-412-RWAB

VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit

Ethernet media converter video transmitter/data receiver fiber optic kit for AUTODOME cameras and for

MIC-IP-PSU for MIC analog cameras.

Order number VG4-SFPSCKT

Software Options

VP-CFGSFT Configuration Tool for Imaging Devices

Camera configuration software for use with Bilinx cameras

Order number VP-CFGSFT

9 | MIC Series 612 Thermal Camera

Represented by:

Americas:

Bosch Security Systems, Inc.

130 Perinton Parkway

Fairport, New York, 14450, USA

Phone: +1 800 289 0096

Fax: +1 585 223 9180 [email protected]

www.boschsecurity.us

Europe, Middle East, Africa:

Bosch Security Systems B.V.

P.O. Box 80002

5617 BA Eindhoven, The Netherlands

Phone: + 31 40 2577 284

Fax: +31 40 2577 330 [email protected]

www.boschsecurity.com

Asia-Pacific:

Robert Bosch (SEA) Pte Ltd, Security

Systems

11 Bishan Street 21

Singapore 573943

Phone: +65 6571 2808

Fax: +65 6571 2699 [email protected]

www.boschsecurity.asia

© Bosch Security Systems 2014 | Data subject to change without notice

2326444939 | en, V14, 19. Aug 2014

China:

Bosch (Shanghai) Security Systems Ltd.

201 Building, No. 333 Fuquan Road

North IBP

Changning District, Shanghai

200335 China

Phone +86 21 22181111

Fax: +86 21 22182398 www.boschsecurity.com.cn

America Latina:

Robert Bosch Ltda Security Systems Division

Via Anhanguera, Km 98

CEP 13065-900

Campinas, Sao Paulo, Brazil

Phone: +55 19 2103 2860

Fax: +55 19 2103 2862 [email protected]

www.boschsecurity.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement