Classic Exhibits TF-409 Table Top Setup Instructions

© 2024
Order #XXXXX
TF-409 Table Top
Using Your Setup Instructions
The Aero Setup Instructions are created specifically for your configuration. The instructions include an
exploded view of the frame which is sequentially labeled. We encourage you to review the instructions
before attempting to assemble your exhibit.
Connections are kept very simple; no tools required. Everything assembles with push-button connectors.
Cleaning and Packing Your Display
1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.
2) Retain all packing material. It will make re-packing much easier and will reduce the likelihood
of shipping damage.
Plan View
Front View
6
6
9
10
Numbered Label
Push-Button
Connections are made by holding the button down and
sliding the red tube into opposing tube until button locks
into the hole. To disassemble, push button and pull or twist
extrusions apart.
6
3
4
6
Note: Attaching Graphics
Attach Graphics to Velcro by wrapping
the Graphic over the Top of the Upper Horizontal
and under the Bottom of the Lower Horizontal
5
Steps:
1) Attach Base Plates 1 and 2 to
verticals 1 and 2 as shown.
2) Assemble pieces 3 thru 10
together as shown.
6
1
Push-Button
2
1
7
8
2
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
">