Datasheet

Managed PoE/PoE+ Gigabit Switches

The Electron Series Switches are available in Smart and Layer 2 Managed PoE+ models ideal for providing power and data connectivity to office VoIP phone systems or for Access Points and IP Surveillance Cameras that need to be positioned where power outlets may not be readily available. Available in 8-port, 24port and 48-port models each Electron Series Switch offers Gigabit Ethernet ports for optimal network throughput.

Some Switch models are IEEE 802.3at/af PoE+ rated to supply additional power to some PoE client devices that require more wattage. Many of the Switches also include uplink ports for Gigabit or fiber connections so the Switches can be deployed at the edge of an existing network or used to provide network connectivity to remote offices or in the case of school campuses remote classrooms.

Many of Electron Series PoE Switches can deliver up to 30 watts per port over connected Ethernet cables to power devices like Wireless Access Points, IP

Cameras, and VoIP (Voice-over-IP) Phone Systems. Since many PoE client devices don’t require a full 30 watts of power, each switch’s management interface gives

IT managers the ability to allocate just the amount of wattage they need per port to power specific PoE client devices to conserve as much of their Electron Series

Switch’s total PoE budget as possible.

Expanded Network Solution

The EnGenius Electron Series is an expansive line of mix-and-match business-class networking products that, when used together, can provide instant network expansion and connectivity to start-up companies, existing small businesses or provide additional robust and reliable connectivity on the edge of larger enterprise networks.

The solution also enhances the productivity of employees in work environments by enabling them to stay connected to colleagues, networked company resources and a company’s Internet connection, provide connectivity to students and faculty in campus network deployments or to a hotel or resort’s services and Internet for guests and staff throughout their properties — all at a significantly lower total cost of ownership than most enterprise brands.

This solution series is comprised of Managed PoE (Power-over-Ethernet) and PoE+ 8-, 24- and 48-Port Gigabit Switches and high-powered, high-speed, high-performing Indoor and Outdoor Wireless Access

Points and Client Bridges in single or dual-band 802.11n and 802.11ac models, many of which can be managed and monitored using the

EnGenius EZ Controller™ application for Windows, Mac OS, and Linux.

FULL OFFERING FROM ENGENIUS

DIY

No need to be a tech guru to install and deploy a wireless network. EnGenius DIY solutions which consist of ceiling-mount EAP Series, and desktop access points/ client bridges ECB Series make it easy and affordable for the non-tech guy to install.

Choose from single band to dual band solutions to meet your everyday needs.

All Purpose

EnGenius All Purpose Access Points, such as the ENS Series, are suitable for both indoor and outdoor deployment scenarios. Fit with weather proof housings, these cost effective long range solutions can be installed anywhere.

WISP

EnStations are high-performance, competitively priced wireless products that can be used in Client Bridge mode and pointed to a Wireless Internet Service Provider’s base station making them ideal CPE that can generate recurring revenue for

Internet providers.

Industrial

Built with industrial grade material, the ENH Series are built with waterproof housing for harsh outdoor environments. From deployments to outdoor stadiums to RV parks to universities, these industrial grade access points have proven to last against the elements.

Power Source

Power all your indoor or outdoor access points with one power source. The

EGS Series of PoE/ PoE+ L2 switches provide you with enough power and ports to connect anything from small businesses to enterprise level business.

Power Source

Electron Series PoE/PoE+ Gigabit Switches give IT managers settings and tools to monitor traffic flow, load and per port connectivity and usage, as well as to manage or quickly adjust the settings or performance of their wired network in real time or reconfigure authorized access to the network on an individual user level.

Comprehensive Security

The Electron Series supports robust security features such as SSL Certificate and

802.1x. In addition, the Electron series Switches also support a complete lineup of advanced Layer 2 features; including secure control connections between Switches and Access Points, Port mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol

(LACP), SNMP v1/v2/v3, RMON, and ACL for extensive network security and more.

To protect internal electronics, the Electron Series Outdoor Access Points have been mounted in an IP65 to IP68-rated enclosures, one of the highest waterproof and dustproof ratings available, designed to withstand extremely harsh environmental conditions. The Electron Series Indoor Access Points come housed in discreet white housings to blend in with any environment, and all Electron Series Switches come with the ability to be either desk or rack mounted.

Gigabit Speeds for a Variety of Needs

All Electron Series IEEE802.11a/b/g/n or 802.11ac Access Points feature Gigabit ports for connectivity to the network to optimize throughput of bandwidth-intensive or sensitive applications like video streaming and video conferencing, telephony, or large file transfers.

Multiple SSID-to-VLAN tagging

Each Dual Band Electron Series Access Point is capable of providing 8 separate

SSIDs per frequency band and (16 total) each SSID can be tagged to an established

VLAN on the network.

Multiple Mode AP/Client Bridges for Virtually any type of Network

Many of the Access Points in the Electron Series can be configured as standard

Access Points or Client Bridges. In a point-to-multi-point scenario an AP with omni-directional antennas can be configured as the main access point connected to a wired network while APs with internal high-gain directional antennas can point back to it. This gives IT managers the ability to leverage the longer range that the

APs with internal directional antennas have because of their more focused signal beam. Many of the Electron Series dual-band Access Points can be configured as a standard AP in one frequency (typically the 2.4 GHz band) and as a WDS bridge

(typically in the 5 GHz band) at the same time. This is ideal for a campus scenario where client devices connect to a company or school network and its Internet connection on the 2.4 GHz band, while the 5 GHz band serves as a backhaul to push the traffic back to the main AP. This eliminates the need to trench for cabling between the main network and the more remote dual-band APs.

Leaders in Long Range Wi-Fi

The reputation that EnGenius Electron Series Access Points enjoy is attributable to their high (dBm) transmit power, their strong receive sensitivity and the engineering, tuning and overall design that goes into each of the AP’s antenna array. It’s that technology expertise when applied that pushes wireless signals farther while at the same time delivering more enhanced receive sensitivity to connect with remote client devices than more expensive enterprise-class devices.

Internal antennas in Electron Series ceiling-mount Access Points can penetrate up to three floors in multiple-story buildings to keep users connected which makes for more cost-effective deployments. Electron Series Outdoor Access/Points with internal directional antennas in optimal conditions can push wireless signals in excess of two miles. And for those IT managers or users who need to push signals even farther, many Electron Series Outdoor Access Points and Indoor desktop

Access Point/Client Bridges feature detachable antennas that can be replaced with even higher-gain third-party antennas.

Durable and Weatherproof Designs

A lot of thought and care goes into the design and durability of Electron Access

Point housings. Electron Series ceiling mount Access Points feature award-winning housing designs that blend with other infrastructure appliances like smoke detectors or alarms mounted on ceilings. These stealthy, unobtrusive designs actually minimize and eliminate theft of the Access Point in hospitality, school and other deployments.

Electron Series Outdoor Access Point housings feature IP65 to IP68 waterproof ratings and routinely brave the elements and whatever Mother Nature throws at them from torrential rain, harsh sleet, freezing weather, snow, dust or intense and prolonged desert heat. Connectors for Ethernet cables on Electron Series Outdoor

APs are also shielded from moisture to prevent electrical shortage resulting in reliable high-powered, long-range performance throughout the long-life of the product.

2

EZ Controller

EZ Controller Access Point Management software provides a robust suite of tools for

IT managers, installers and network administrators who deploy, manage and maintain wireless networks. With EZ Controller, EnGenius Wireless Indoor and Outdoor Access

Points and Client Bridges can be configured, controlled and monitored from one central location.

EZ Controller is a valuable tool for organizations that deploy multiple EnGenius long-range, versatile wireless networking products into complex architectural or environmentally-challenging networking environments.

- Easy-to-use User Interface

- Optimize network performance

- Eliminate downtime

- See real-time wireless coverage

- Monitor and control each asset

- Monitor traffic load by AP, MAC or IP address

- Sequential firmware upgrades to deployed APs/Bridges

- Import and archive floorplan maps for radio coverage plotting

- Label assets by MAC or IP address or user-defined aliases

- Realtime AP statistics

EZ Controller Supports the following EnGenius Products:

EAP300 EAP350 EAP600 EAP900H EAP1750H ECB300 ECB350

ECB600 ECB1750 ENS202 ENS202EXT ENS500 ENS500EXT ENS1200 ENS1750

ENH202 ENH500 ENH220EXT ENH700EXT ENH710EXT ENH900EXT

Minimum System Requirements

Windows: XP SP3 / Vista SP1 & SP2 / 7 SP1 / 8 / Pentium Dual-Core 3.20 GHz / 2 GB RAM / 400 MB HD space

Mac: OS X 10.6 / 10.7 / 10.8 / 10.9 Intel x86 Processor / 2 GB RAM / 400 MB HD space

Linux: Ubuntu 11.04 Pentium Dual-Core 3.2 GHz / 2 GB RAM / 400 MB HD space

ENH1750EXT EnStation2 EnStation5

3

Mesh Mode

Electron Series Wireless Access Points support mesh networking in the 2.4 GHz frequency band to provide self-organizing, self-healing, redundant and robust connectivity for wireless clients in the network.

In some scenarios activating mesh can help to lower deployment costs when running Ethernet cabling is not practical.

Building 2

ENH900EXT

Building 1

Building 5

ENH1750EXT

Building 3

ENH900EXT

ENH900EXT

Building 4

ENH900EXT

Roaming – Because Staying Connected Can Be A Moving

Experience

Some Electron Series Access Points also support Roaming for clients authenticated to a RADIUS server. This means that employees can be constantly connected to the network – whether they are warehouse workers scanning and capturing barcode information, employees on Wi-Fi phone calls

Fast Roaming

while walking to meetings on another part of a corporate campus, healthcare professionals capturing patient information on mobile devices, or security personnel who need uninterrupted video surveillance on a mobile device when they are alerted to and making their way to the location of an incident.

4

Band Steering (Available on Dual Band Products)

How Band Steering Works and Its Benefit

When wireless networks experience excessive traffic, users may be inconvenienced by slower file transfers and frequent video buffering especially on the 2.4 GHz band. Several of the Electron Series Access Points include a

Band Steering option which when applied in the browser-based interface, automatically shifts the connection of Dual-Band client computers, tablets, smart phones and other devices to the 5 GHz band where there is less traffic and more available RF channels. This leaves Single-Band 2.4 GHz (802.11b/g/n) clients to operate in the 2.4

GHz band that with Band Steering activated becomes less congested.

Band Steering: OFF

2.4 GHz

Single Band Devices

2.4 GHz

/

5 GHz

Dual Band Devices

2.4 GHz Single Band Devices

Band Steering: ON

Congested Traffic on Dual

Band Devices

2.4 GHz Single Band Devices

2.4 GHz Band 5 GHz Band

Shifts Dual Band Devices to 5 GHz Band for

Smooth Connection

5

Point-to-Point Wireless Bridging

A wireless point-to-point bridge is employed when it’s more practical or economical to extend an existing network wirelessly than laying and often trenching Ethernet or Fiber cabling. Both the ENS and ENH families of Access

Points and Client Bridges in the Electron Series enable IT managers, network administrators or users to configure the devices in Client Bridge or WDS Bridge mode. In a wireless bridging scenario, one of the ENS or ENH Access Points should be configured in AP mode while the other ENS or ENH Access Point or

Bridge should be configured as a Client Bridge or WDS Bridge and positioned within the wireless range of the Access Point.

If the ENS or ENH product has an internal directional antenna (like the ENS200,

ENS202, ENS500, ENH202 or ENH500) then distance between the Access Point and the Client Bridge can be increased since the device’s directional antenna has a more focused signal array for longer point-to-point distance. Using Access Points/

Client Bridges each with internal directional antennas, like the products mentioned above (one configured in AP mode and the other in Bridge mode) enables placement of the two devices even farther apart from each other. Depending on the outdoor ENS or ENH product, the surrounding landscape, interference from nearby wireless signals and other environmental factors, Electron Series Outdoor

Client Bridges can connect to Access Points at distances of hundreds of feet or in excess of two miles.

Point-to-Multi-Point Wireless Networking

Point-to-Multi-Point wireless networking scenarios are often used in campus deployments to connect to networks in other buildings; or in deployments using multiple dual-band Access Points for corporate and school campuses, campgrounds or RV parks that provide several wireless cells that users can connect to with their provisioned or BYOD devices (laptops, tablets or smartphones).

In corporate campus building-to-building scenarios there is typically a designated central Access Point that is tethered to the main network. In school or university deployments this could be an administration building or library.

Around the central Access Point are other Access Points each configured in

Client Bridge or WDS Bridge mode.

With dual-band Access Points, the wireless Bridge established between the central AP and the surrounding Bridges can be configured for one frequency band. The 5 GHz frequency band is often used because it has more channel options and avoids the interference from more commonly used 2.4 GHz devices and networks. Each Client Bridge in this scenario is in turn connected to an Ethernet or PoE Switch that also provides network access and connectivity to other devices like computers, printers, servers, NAS (network attached storage), and other Ethernet-enabled peripherals.

6

Expanded Network Solution |

DIY

Electron Series DIY

Ceiling-mount Access Points

Compare

EAP Series

Frequency

Maximum Data Speed

LAN Interface

Encryption

SDRAM

Flash

RF Power (dBm)

Receive Sensitivity

Antenna

Transmit Power (mW)

Operation Modes

Number of SSID

802.1q zVLAN

QoS

AP Management Software (EZC)

DC Power

Power Over Ethernet (PoE)

User Support

EAP1750H

802.11 a/b/g/n/ac

450 + 1300 Mbps

10/100/1000

WPA2 WPA WEP

128 MB

16 MB

2.4 GHz: 28 dBm

5 GHz: 28 dBm

≤ -94 dBm

6x 5 dBi

Sectorized 3D

630 mW/630 mW

Access Point

WDS AP

WDS Bridge

16 (8 per radio)

EAP900H

802.11 a/b/g/n

450 + 450 Mbps

10/100/1000

WPA2 WPA WEP

128 MB

16 MB

2.4 GHz: 28 dBm

5 GHz: 28 dBm

≤ -94 dBm

6x 5 dBi

Sectorized 3D

630 mW/630 mW

Access Point

WDS AP

WDS Bridge

16 (8 per radio)

EAP600

802.11 a/b/g/n

300 + 300 Mbps

10/100/1000

WPA2 WPA WEP

64 MB

16 MB

2.4 GHz: 29 dBm

5 GHz: 26 dBm

≤ -94 dBm

4x 5 dBi Omni

Embedded

800 mW/400 mW

Access Point

WDS AP

WDS Bridge

Repeater

16 (8 per radio)

EAP350

802.11 b/g/n

300 Mbps

10/100/1000

WPA2 WPA WEP

32 MB

4 MB

29 dBm

≤ -94 dBm

2x 5 dBi Omni

Embedded

800 mW

Access Point

WDS AP

WDS Bridge

Repeater

8

EAP300

802.11 b/g/n

300 Mbps

10/100

WPA2 WPA WEP

32 MB

4 MB

29 dBm

≤ -92 dBm

2x 5 dBi Omni

Embedded

800 mW

Access Point

WDS AP

WDS Bridge

Repeater

4

802.3at

Up to 50 on each radio

802.3at

Up to 50 on each radio

802.3at/af

Up to 50 on each radio

802.3af

Up to 50

802.3af

Up to 32

7

Expanded Network Solution |

DIY

Electron Series DIY

Desktop Access Points

Compare

ECB Series

Frequency

Maximum Data Speed

LAN Interface

Encryption

SDRAM

Flash

RF Power (dBm)

Antenna

Transmit Power (mW)

Operation Modes

Number of SSID

802.1q zVLAN

QoS

AP Management Software (EZC)

DC Power

Power Over Ethernet (PoE)

User Support

ECB1750

802.11 a/b/g/n/ac

450+1300 Mbps

10/100/1000

WPA2 WPA WEP

128 MB

16 MB

2.4 GHz: 29 dBm

5 GHz: 29 dBm

6x 5 dBi Omni

RP-SMA Female

800 mW/400 mW

Access Point

Client Bridge

WDS AP

WDS Station

WDS Bridge

16 (8 per radio)

802.3at

Up to 50

ECB600

802.11 a/b/g/n

300+300 Mbps

10/100/1000

WPA2 WPA WEP

64 MB

16 MB

2.4 GHz: 29 dBm

5 GHz: 26 dBm

4x 5 dBi Omni

RP-SMA Female

800 mW/400 mW

Access Point

Client Bridge

WDS AP

WDS Station

Universal Repeater

16 (8 per radio)

ECB350

802.11 b/g/n

300 Mbps

10/100/1000

WPA2 WPA WEP

32 MB

8 MB

29 dBm

2x 5 dBi Omni

RP-SMA Female

800 mW

Access Point

Client Bridge

AP Router

WDS AP

Universal Repeater

8

ECB300

802.11 b/g/n

300 Mbps

10/100

WPA2 WPA WEP

32 MB

4 MB

29 dBm

2x 5 dBi Omni

RP-SMA Female

800mW

Access Point

Client Bridge

AP Router

WDS AP

Universal Repeater

4

802.3at/af

Up to 50

802.3af

Up to 32

802.3af

Up to 32

8

Expanded Network Solution |

ALL PURPOSE

Electron Series ALL PURPOSE

Indoor/Outdoor Access Points

Compare

ENS Series

Wi-Fi Standard

RAM

Flash

Frequency Band

Maximum Advertised Speed

RF Power (dBm)

RF Power (mW)

Operation Modes

LAN Interface

Antenna

Antenna Connector Type

Encryption

PoE power

IP rating

Primary application

Secondary application

Specialty application

ENS1750

802.11 a/b/g/n/ac

64MB

16MB

ENS1200

802.11 a/b/g/n/ac

64MB

16MB

ENS500EXT

802.11 a/n

32MB

16MB

ENS500

802.11 a/n

32MB

16MB

ENS202EXT

802.11 b/g/n

32MB

16MB

ENS202

802.11 b/g/n

32MB

16MB

2.4 GHz & 5GHz

2.4 GHz: 450Mbps

5 GHz: 1300Mbps

2.4 GHz: 29 dBm

2.4 GHz: 28 dBm

800mW

2.4 GHz & 5GHz

2.4 GHz: 300Mbps

5 GHz: 866Mbps

27 dBm

5GHz

300Mbps

26 dBm

5 GHz

300Mbps

26 dBm

2.4 GHz

300Mbps

26 dBm

2.4 GHz

300Mbps

26 dBm

500mW

400mW

400mW 400mW 400mW

Access Point

Client Bridge

WDS Bridge/AP/Station

Access Point

Client Bridge

WDS Bridge/AP/Station

Access Point

Client Bridge

WDS Bridge/AP/Station

Client Router

Access Point

Client Bridge

WDS Bridge/AP/Station

Client Router

Access Point

Client Bridge

WDS Bridge/AP/Station

Client Router

Access Point

Client Bridge

WDS Bridge/AP/Station

Client Router

10/100/1000 x2

10/100/1000 x2

10/100 x2

10/100 x2 10/100 x2 10/100 x2

Built-in

5 dBi Directional

N/A

Built-in

5 dBi Directional

N/A

2x External 5 dBi

Omni Directional

SMA

Built-in

10 dBi Directional

N/A

2x External 5 dBi

Omni directional

SMA

Built-in

8dBi Directional

N/A

WEP/WPA/WPA2

48v

65 65 65 65 65 65 point 2 multipoints point 2 multipoints point 2 multipoints building 2 building point 2 multipoints building 2 building

5GHz single radio bridge

Highly interferred

2.4GHz wireless traffic

WEP/WPA/WPA2

48v

5GHz single radio bridge

Highly interferred

2.4GHz wireless traffic

WEP/WPA/WPA2

24v

5GHz single radio bridge

Highly interferred

2.4GHz wireless traffic

WEP/WPA/WPA2

24v high speed mid-long range

P2P network

Outdoor IP cam

AP in congested

2.4GHz area

WEP/WPA/WPA2

24v

2.4GHz N300 radio bridge small base station replacement

WEP/WPA/WPA2

24v high-speed

CPE device

Outdoor video

IP cam wireless client

Common Key Features

Features

•

SSID Broadcast Disabled

•

Multiple SSID

•

SSID to VLAN Mapping

•

Client Isolation

•

Radius client support

•

VPN Pass-through support

•

802.1X Supplicant (CB Mode)

•

MAC address Filtering

•

QoS Support

•

Telnet

•

SNMP

•

Management Software / Controller

•

PoE kit

•

FCC Certification

9

Expanded Network Solution |

WISP

Electron Series WISP

Long Range Access Points/Bridges

Compare

EnStation Series

Standards

Frequency

Data Rates

Radio Chains/Streams

RF Output Power

Ingress Protection Rating

Fast Ethernet (10/100 Mbps)

Secondary Gigabit port

Integrated Antennas

EnStation 2

802.11b/g/n

2.4 GHz

Up to 300 Mbps

2 x 2:2

26 dBm

55

13 dBi

Common Key Features

Features

•

Auto Channel Selection

•

Guest Network

•

WEP, WPA-PSK, WPA2-PSK, WPA-PSK

Mixed, WPA-Enterprise, WPA2- Enterprise,

WPA-Mixed Enterprise

•

4 SSIDs

•

VLAN Pass-through

•

QoS

•

IPv6

•

SSID to VLAN Mapping

•

CLI

•

Client Traffic Status

•

WiFi Scheduler

EnStation 5

802.11a/n

5 GHz

Up to 300 Mbps

2 x 2:2

26 dBm

55

19 dBi

•

RADIUS Accounting

•

Multicast Support

•

SNMP v1/v2c/v3

•

MAC Address Filter

10

Expanded Network Solution |

INDUSTRIAL

Electron Series INDUSTRIAL

Outdoor Access Points

Compare

ENH Series

Frequency

Speed

LAN

RAM

Flash

Encryption

Mx. Tx power

RF output (mW)

Internal Antenna

External Antenna

Dual Radio

Operation Modes

ENH1750EXT

802.11a/b/g/n/ac

ENH900EXT

802.11a/b/g/n

ENH710EXT

802.11a/b/g/n

ENH700EXT

802.11a/b/g/n

2.4 GHz: 450 Mbps

5 GHz: 1300 Mbps

2.4 GHz: 450 Mbps

5 GHz: 450 Mbps

2.4 GHz: 300 Mbps

5 GHz: 300 Mbps

2.4 GHz: 300 Mbps

5 GHz: 300 Mbps

10/100/1000 x 2 10/100/1000 x 2 10/100/1000 x 2 10/100/1000 x 1

256 MB

16 MB

WPA2 / WPA / WEP

29 dBm on 2.4 GHz

29 dBm on 5 GHz

Radio 1: 800 mW

Radio 2: 800 mW

N/A

5 dBi 2.4 GHz Omni x 3

7 dBi 5 GHz Omni x 3

256 MB

16 MB

WPA2 / WPA / WEP

29 dBm on 2.4 GHz

29 dBm on 5 GHz

Radio 1: 800 mW

Radio 2: 800 mW

N/A

5 dBi 2.4 GHz Omni x 3

7 dBi 5 GHz Omni x 3

128 MB

16 MB

WPA2 / WPA / WEP

27 dBm on 2.4 GHz

27 dBm on 5 GHz

Radio 1: 500 mW

Radio 2: 500 mW

N/A

5 dBi 2.4 GHz Omni x 2

7 dBi 5 GHz Omni x 2

64 MB

8 MB

WPA2 / WPA / WEP

27 dBm on 2.4 GHz

27 dBm on 5 GHz

Radio 1: 500 mW

Radio 2: 500 mW

N/A

5 dBi 2.4 GHz Omni x 2

7 dBi 5 GHz Omni x 2

ENH220EXT

802.11 b/g/n

300 Mbps

10/100/1000 x 2

128 MB

16 MB

WPA2 / WPA / WEP

28 dBm

630 mW

N/A

5 dBi 2.4 GHz Omni x 2

ENH500

802.11 a/n

300 Mbps

10/100 x 2

32 MB

8 MB

WPA2 / WPA / WEP

27 dBm

500 mW

13dBi Panel

N/A

ENH202

802.11 b/g/n

300 Mbps

10/100 x 2

32 MB

8 MB

WPA2 / WPA / WEP

29 dBm

800 mW

10dBi Panel

N/A

Access Point

WDS AP&STA

WDS Bridge

Mesh

Access Point

WDS AP&STA

WDS Bridge

Mesh

Access Point

WDS AP&STA

WDS Bridge

Mesh

Access Point

Client Bridge

WDS AP&STA

WDS Bridge

Access Point

WDS AP&STA

WDS Bridge

Mesh

Access Point

Client Bridge

WDS AP&STA

WDS Bridge

Access Point

Client Bridge

WDS AP&STA

WDS Bridge

Band Steering

Fast Roaming

Signal Strength LED

Weather Proof

Ethernet Surge Arrestor

PoE (proprietary)

PoE Injector kit

802.3at

Primary application

Secondary application

Specialty application

IP68

48v

IP68

48v

IP68

48v

IP67

48v

IP68

48v

IP65

24v

IP65

24v building 2 buildings

(Enterprise class) campground/

RV park/Marina

Harsh weather environment AP building 2 buildings

(Enterprise class) campground/

RV park/Marina

Harsh weather environment AP building 2 buildings

(Enterprise class) campground/

RV park/Marina

Harsh weather environment AP building 2 buildings

(Enterprise class) campground/

RV park/Marina

Harsh weather environment AP building 2 buildings

(Enterprise class) campground/

RV park/Marina

Harsh weather environment AP building 2 building in high 2.4 GHz area high speed mid-long range P2P network

Outdoor IP cam AP in high 2.4 GHz area building 2 building high-speed

CPE device outdoor IP cam wireless client

Common Key Features

Features

•

Transparent Bridging

•

Multiple SSID’s

•

WMM QoS

•

SNMP

•

EZ Controller

•

GUI

•

AC - DC adapter

11

Expanded Network Solution |

POWER SOURCE

Electron Series POWER SOURCE

PoE/PoE+ Smart Switches

Compare

EGS Series

10/100/1000 Ports

SFP

Power Type

PoE Standard (IEEE802.3at/af)

PoE Capable Ports

Power Budget

Chassis

Material

Color

Reset Button

Loopback Detection

IGMP Snooping (Supports v1, v2)

Port Mirroring

Port Trunking

Bandwidth Control

Storm Control (Broadcast / Multicast / Unknown Unicast)

802.1Q VLAN

Port-based VLAN

CoS based on 802.1p priority

CoS based on physical port

Power Class Configuration

Power feeding with priority

User defined power limit

Web-based support

Web UI supports non-IE browser

(Chrome, Firefox, Safari)

PoE Injector kit

Cable Diagnostic

EGS2108P

8

0

External

802.3af

port 1-4

61.6w

Desktop

Metal

Gray

EGS2110P

8

2 (additional)

External

802.3af

port 1-8

61.6w

Desktop

Metal

Gray

EGS5110P

8

2 (additional)

Internal

802.3at/af port 1-8

130w

Rackmount (1U, 13 inch)

Metal

Dark Blue

12

Expanded Network Solution |

POWER SOURCE

Electron Series POWER SOURCE

Layer 2 PoE+ Switches

Compare

EGS Series

10/100/1000 Ports

SFP

RJ45 Console

GIgabit Uplink Port

Power Type

PoE Standard (IEEE802.3at/af)

PoE Capable Ports

Power Budget

Chassis

Material

Color

Rest Button

EGS5212FP

8

0

1

2

Internal

802.3at/af port 1-8

130w

Rackmount (1U, 13 inch)

Metal

Dark Blue

Common Key Features

L2 Features

•

802.1D Spanning Tree (STP)

•

802.1s Multiple Spanning Tree (MSTP)

•

802.1w Rapid Spanning Tree (RSTP)

•

MLD Snooping

•

IGMP Snooping v1/v2/v3

•

802.3ad Link Aggregation

•

Port Mirroring

•

Port Trunking

•

LLDP

•

MAC Address Table

•

Bandwidth Control

VLAN Features

•

802.1Q VLAN

•

Management VLAN ID

•

Port-based VLAN

•

Voice VLAN

CoS Features

•

CoS based on DSCP

•

CoS based on 802.1p Priority

•

CoS based on Physical Port

PoE Management

•

Power Class Configuration

•

Power Feeding with Priority

•

User Defined Power Limit

EGS7228P

24

4 (additional)

1

0

Internal

802.3at/af port 1-24

185w

Rackmount

(1U, 19 inch)

Metal

Dark Blue

EGS7228FP

24

4 (additional)

1

0

Internal

802.3at/af port 1-24

370w

Rackmount

(1U, 19 inch)

Metal

Dark Blue

EGS7252FP

48

4 (additional)

1

0

Internal

802.3at/af port 1-48

740w

Rackmount

(1U, 19 inch)

Metal

Dark Blue

Security

•

802.1X Port Based Access Control/

Guest VLAN

•

RADIUS Authentication

•

SSH / Telnet / Http(s)

•

Port Security

•

Storm Control

(Broadcast/Multicast/Unknown unicast)

•

DoS Attack Prevention

•

BPDU Attack Prevention

•

MAC, IPv4, IPv6 ACL

Management

•

User Management

•

Dual Image

•

Web-based Support

•

SNMP v1/v2c/v3

•

TFTP Upgrade

•

Command Line Interface (CLI)

•

SNTP

•

Web UI, Supports Non IE Browser

(Chrome, Firefox, Safari)

•

RMONv1 (Supports 4 Groups)

•

SYSLOG

•

•

Cable Diagnostics

MIB Support (RFC1213, RFC1493,

RFC1757, RFC2674)

Visit and on

EnGenius Technologies

|

1580 Scenic Ave. Costa Mesa, CA 92626

Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners.

For United States of America: Copyright © 2013 EnGenius Technologies, Inc. All rights reserved.

Version 1.0 - 12/29/14

13