Magnavox BZV420MW8 Owner`s manual

Introduction
Owner's Manual
Playback
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Recording
NEED HELP FAST?
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING
YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.
Basic Setup
THANK YOU FOR CHOOSING MAGNAVOX.
Connections
BZV420MW8
DIGITAL VIDEO DISC RECORDER WITH
VIDEO CASSETTE RECORDER
Editing
Function Setup
VCR Functions
Others
E9E2ZUD_BZV420MW8.indd 1
Español
© 2007 Funai Electric Co., Ltd.
2007/09/04 17:05:15
1
Connections
Connection to an External Tuner
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
e.g.)
DIGITAL VIDEO DISC RECORDER WITH
VIDEO CASSETTE RECORDER
AUDIO IN
L
VIDEO IN
R
rear of your TV
BZV420MW8
Pl a y a b l e Di s cs
RF coaxial cable
S-VIDEO
This unit is compatible to play back the following discs / files.
DVD/VCR
IN --- AUDIO --- OUT
ANT. IN
RCA audio
cable
L
Playable discs
Logos
Playable discs
RCA video cable
RF coaxial cable
Logos
R
IN
DVD-video
S-VIDEO
OUT
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
S-VIDEO
Y
CD-DA (audio CD)
IN ---VIDEO --- OUT
TV signal
PB
/CB
IN
VIDEO
OUT
AUDIO OUT
L
R
DVD/VCR
IN --- AUDIO --- OUT
L
L
R
R
IN ---VIDEO --- OUT
PR
/CR
OUT
DVD+RW
video CD
S-video cable
RCA video cable
DVD+R
IN
or
rear of this unit
external tuner
RCA audio cable
CD-RW
3) Plug in the power cords of the devices to the AC outlet.
DVD-RW
(Finalized video mode discs only)
CD-R
How to Select External Input Channel on Your TV
Playable files
DVD-R
(Finalized video mode discs only)
Media
CD-DA
CD-RW/-R
After you have completed the connections, switch the input selector on your TV to an appropriate external input
channel. Press a button on the TV’s original remote control that selects an external input channel repeatedly
until the DVD recorder’s opening picture appears. Check your TV owner’s manual for details.
MP3
is a trademark of DVD Format/Logo Licensing Corporation.
Settings for the Video Input
You must let the unit know which video input jack you are using before making a recording.
STANDBY-ON
Re gi o n C o d e s
Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
SOURCE TIMER SET DISPLAY OPEN/CLOSE
The number inside the globe refers to region of the world.
This unit can playback DVD that are labeled for ALL regions or for Region 1.
This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only
be recorded to once. DVD+RW/DVD-RW can be recorded to and erased many times.
DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit.
• Following discs are recommended for good recording quality and
Logo
Attributes
are proven to be compatible with this unit. However, depending
on the media condition the unit may not read the disc properly.
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x
JVC
DVD-RW 4x
8cm/12cm, single-sided,
Maxell
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+RW DVD+R single layer disc
SONY
DVD+R 4x/8x/16x, DVD+RW 4x
Approx. max. recording time
TDK
DVD+R 4x/8x/16x
(SLP mode):
Performance of any other discs are not guaranteed.
360 minutes (4.7GB) (for 12cm)
Re co r d a b l e Di s cs
• You can play back DVD+RW on most DVD players without
108 minutes (1.4GB) (for 8cm)
finalizing. However, if you have added or deleted chapters,
or made chapters hidden, you must perform “Make Edits
DVD-RW DVD-R
Compatible” before being able to see those effects on other
units. (Refer to page 67 in the owner's manual.) To play back discs
other than DVD+RW on other DVD players, you will need to finalize.
• DVD-RW recorded in the mode other than +VR is not recordable on this unit
Unrecordable Discs
unless you erase all contents in the disc. (Refer to page 66 in the owner's manual.)
• DVD-R recorded in the mode other than +VR is not recordable on this unit.
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
Use [K / L] to select “Video”, then press [OK].
Use [K / L] to select “Video Input”, then press [OK].
0
SETUP
DISC MENU
o
OK
s
B
TITLE
Use [K / L] to select desired external input
position, then press [OK].
RETURN
p
B
j
F
h
i
g
--
REC
Progressive Scan
TV Aspect
Video Input
Video Input
E1 (Rear)
E2 (Front)
C
TRACKING
+
VCR
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Use [K / L] to select the input jack type to
connect, then press [OK].
DVD
REC MODE D.DUBBING AUDIO
I
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Progressive Scan
TV Aspect
Video Input
E1Video
(Rear)Input
In
E1Video
(Rear)
E2S-Video
(Front)In
CM SKIP SEARCH RAPID PLAY
Press [SETUP] to exit.
Follow to the back side of this sheet.
E9E2ZUD_BZV420MW8_QG.indd 1
2007/09/11 17:06:55
2
Initial Setting
Press [STANDBY-ON y].
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
1
Turn the TV on. Select the input to which the unit
is connected.
Initial Setup
Use [K / L] to select your desired language,
then press [OK] to set language.
SETUP
OK
2
Press [OK] to activate “Clock Setting”.
B
TITLE
A
.@/:
ABC
1
2
JKL
4
5
6
PQRS
TUV
WXYZ
RETURN
7
8
9
SPACE
CLEAR
0
o
OK
s
RETURN
4
p
h
h
g
C
+
3
3 –1
Date
E1/E2
DVD
REC MODE D.DUBBING AUDIO
REC
I
3
4
5
CM SKIP SEARCH RAPID PLAY
Set a timer programming.
Press [OK].
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
Press [DVD].
4
Press [OPEN/CLOSE A] to open the disc tray
and insert your disc with its label facing up.
* Make sure the disc is compatible with this unit. (Refer to page 21 in
the owner's manual for the list of compatible discs.)
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
NB552
Press [TIMER SET] to set a timer programming.
TIMER REC indicator will light up on the front panel.
2
Set the date.
Select the appropriate Select a recording media Select a recording
external input position (“DVD” or “VCR”).
mode.
(E1/E2) to which your
external tuner is
connected.
Set start and end
time.
0
DISC MENU
3
SETUP
o
Press [REC MODE] to select a recording mode.
Recording
mode
HQ (1Hr)
SP (2Hr)
SPP (2.5Hr)
LP (3Hr)
EP (4Hr)
SLP (6Hr)
Recording
time
8cm Disc 12cm Disc
18 min
60 min
36 min
120 min
45 min
150 min
54 min
180 min
72 min
240 min
108 min
360 min
5
Press [REC I] to start recording.
Press [STOP C] to stop recording.
OK
s
Date
JAN/02
E1/E2
E1
B
TITLE
RETURN
p
Video/sound
quality
Start
--:-REC To
DVD
6
i
Good
Date
JAN/02
E1/E2
E1
End
--:-Mode
SP
SP
B
j
Start
12 : 00AM
REC To
DVD
2 : 00
h
o
C
g
End
--:-Mode
SP
SP
Date
JAN/02
E1/E2
E1
p
Start
12 : 00AM
REC To
DVD
2 : 00
End
1 : 00AM
Mode
SP
SP
o
B
F
Date
JAN/02
E1/E2
E1
1 : 00
End
1 : 00AM
Mode
SP
SP
o
Date
JAN/02
E1/E2
E1
Start
12 : 00AM
REC To
DVD
1 : 00
End
1 : 00AM
Mode
SP
SP
o
B
p
Start
12 : 00AM
REC To
DVD
1 : 00
o
B
B
p
p
p
TRACKING
--
Poor
Press [SOURCE] to select the appropriate external
input position (E1/E2) to which your external tuner is
connected. Then select the desired channel to record
on the external tuner.
6
C
+
VCR
JAN / 01 / 2007 ( MON )
12 : 00 AM
STANDBY-ON
1
2
4
Start
End
New Program
Clock Setting
Basic Recording
0:58
g
TRACKING
--
DVD Recording
SP(2Hr)
i
MON JAN/01 11:00AM
Use [{ / B] to select an item to set, and use
[K / L] to select the contents to suit your
preference, then press [OK].
TRACKING
--
B
j
F
i
2
B
TITLE
Initial Setup
F
SETUP
1
Timer Programming
B
MNO
DISC MENU
p
j
53
TIMER
Use [K / L] to select “New Program”, then press [OK].
--- / -- / ---- (---)
-- : -- --
DEF
GHI
Press [TIMER].
Clock Setting
s
SOURCE TIMER SET DISPLAY OPEN/CLOSE
1
2
English
Français
Español
Initial Setup
o
STANDBY-ON
OSD Language
0
DISC MENU
Timer Recording
You can program the unit to record up to 12 programs within a month in
advance. Daily or weekly program recordings are also available.
Before recording, make sure
• Connect the external tuner to either E1 or E2 and set it to output audio/video
signals when it comes to the time you want to start recording.
• Do not change the external tuner’s channel while you are recording. You
cannot watch one channel and record another at the same time.
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.
You need to follow these steps when you turn on this unit for the first time.
STANDBY-ON
3 –2
+
VCR
REC
1
DVD
4
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
5
3
1
To set one-touch timer recording (OTR)...
This is a simple way to set the
recording time in blocks of 30 minutes. I
Press [REC I] repeatedly until the
desired recording time (30 minutes to
6 hours) appears on the TV screen.
One-touch timer recording will start.
• To cancel one-touch timer recording within
the specified time, press [STOP C].
Playback
Open the disc tray.
2
Insert a disc.
3
Start playing back.
4
Stop playing back.
0:30
OPEN/CLOSE
0:30
(normal recording)
6:00
A
B
C
1:00
5:30
1VMN24194 / E9E2ZUD_QG ★★★★★
E9E2ZUD_BZV420MW8_QG.indd 2
2007/09/11 17:06:59
PRECAUTIONS
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The caution marking is located on the rear of the cabinet.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device,
due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the manual. The
user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations
concerning chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain
this information for future reference.
Model No. _____________________
Serial No. _____________________
2
EN
E9E2ZUD_BZV420MW8.indd 2
2007/09/04 17:05:18
Important Safeguards
Recording
Playback
Editing
Function Setup
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 3
Basic Setup
12. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
13. Lightning - For added protection for this product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the product due to
lightning and power-line surges.
14. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
15. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind
into this product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the product.
17. Servicing - Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
18. Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in
performance this indicates a need for service.
19. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock or other hazards.
20. Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform
safety checks to determine that the product is in proper
operating condition.
21. Heat - This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Connections
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by the
user for cleaning or any other purpose, may exclude the
reference to unplugging the appliance in the cleaning
description otherwise required in item 5.
6. Attachments - Do not use attachments not
recommended by the product manufacturer as they may
cause hazards.
7. Water and Moisture- Do not use this product near water,
for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming
pool, and the like.
8. Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and
serious damage to the appliance. Use only with a cart,
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting
of the appliance should follow the manufacturer's
instructions and should use a
mounting accessory recommended
by the manufacturer. An appliance
and cart combination should be
moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
9. Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating,
and these openings must not be blocked or covered.
The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.
10. Power Sources - This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply
to your home, consult your appliance dealer or local
power company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
11. Grounding or Polarization - This product is equipped
with a polarized alternating-current line plug (a plug
having one blade wider than the other). This plug will
fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail
to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized
plug.
Introduction
PRECAUTIONS
3
2007/09/04 17:05:19
PRECAUTIONS
Installation Location
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields.
Supplied Accessories
remote control (NB552UD) with batteries (AAAx2)
RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
owner's manual (1VMN24193)
Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place or
after heating a cold room or under conditions of high
humidity. Do not use this unit at least for 2 hours until its
inside gets dry.
quick guide (1VMN24194)
About Copyright
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is
prohibited.
Notice for Progressive Scan Output
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In case of picture problems with 525 (480) progressive
scan output, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there
are questions regarding your TV set compatibility with
this 525p (480p) DVD player, please contact our customer
service center.
4
EN
E9E2ZUD_BZV420MW8.indd 4
2007/09/04 17:05:19
Maintenance
Servicing
Cleaning the cabinet
Cleaning discs
Cleaning the disc lens
Disc handling
Auto head cleaning
Manufactured under license from
Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of
Dolby Laboratories.
Dolby Digital Recording
“Dolby® Digital Recording enables consumers to record
high-quality video with stereo sound on recordable
DVD discs. The technology, when utilized instead of
PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording
time on each DVD. DVDs created using Dolby Digital
Recording will play back on all DVD-video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.
Function Setup
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt
accumulated on the video heads after a long period of
use, or the usage of rental or worn tapes can cause this
problem. If a streaky or snowy picture appears during
playback, the video heads in your unit may need to be
cleaned.
• With a digital camera (including built-in
camera of cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control. If
infrared light appears through digital camera,
the remote control is working.
Editing
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
• With an AM radio:
Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will be
fluttering when you press any key and the
radio receives the signal. This means the
remote control is working.
Playback
• If this unit still does not perform properly
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
AM radio or a digital camera (including built-in camera
of cellular phone). It will help to define the cause of
malfunction.
Recording
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
IR signal check
VCR Functions
© 2007 Funai Electric Co., Ltd.
Others
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is
strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
EN
Español
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
E9E2ZUD_BZV420MW8.indd 5
Basic Setup
• Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
1. Please visit your local Audio/Video store and purchase a
good quality VHS video head cleaner.
2. If a video head cleaner does not solve the problem,
please consult your dealer or an Authorized Service
Center.
Note
• Remember to read the instructions along with the video
head cleaner before use.
• Clean video heads only when problems occur.
Connections
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 80-84 before returning the product.
• If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable
parts inside. Turn off, unplug the power plug and
please call our help line mentioned on the front page
to locate an Authorized Service Center.
Introduction
PRECAUTIONS
5
2007/09/04 17:05:20
CONTENTS
Introduction
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .7
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connections
CONNECTION TO AN EXTERNAL TUNER. . . . . . . . . . .
SETTINGS FOR THE VIDEO INPUT. . . . . . . . . . . . . . . . .
CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . .
CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . .
12
13
14
15
Basic Setup
THE VCR / DVD RECORDER SWITCHING . . . . . . . . . . .
GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . .
On-Screen Display / Menu . . . . . . . . . . . . . . . . . . . . . . . . .
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
17
17
18
19
20
20
Recording
INFORMATION ON DVD RECORDING . . . . . . . . . . . . .
BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . .
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . .
BASIC RECORDING & ONE-TOUCH TIMER
RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . .
SATELLITE LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . .
Overwriting from the Beginning of the Title. . . . . . . .
Overwriting in the Middle of the Title . . . . . . . . . . . . . .
Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EXTERNAL DEVICE RECORDING . . . . . . . . . . . . . . . . . .
Connection to an External Device. . . . . . . . . . . . . . . . . .
Recording from an External Device . . . . . . . . . . . . . . . .
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . .
PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . .
Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DUBBING MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
22
22
22
23
25
28
29
31
31
31
32
33
33
34
35
36
36
37
38
Playback
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 40
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 42
Playing Back an Audio CD and a CD-RW/-R with MP3
Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 45
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 46
Skipping TV Commercials During Playback. . . . . . . . . 46
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
6
EN
E9E2ZUD_BZV420MW8.indd 6
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . .
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REPEAT / RANDOM / PROGRAM PLAYBACK . . . . . . .
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SELECTING THE FORMAT OF AUDIO AND VIDEO . .
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . .
Switching Virtual Surround System . . . . . . . . . . . . . . . .
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . .
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47
48
48
49
49
49
50
51
51
51
52
53
53
53
54
54
54
Editing
INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . .
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . .
Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . .
Erasing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making Edits Compatible . . . . . . . . . . . . . . . . . . . . . . . . . .
55
55
55
56
56
57
58
59
61
62
63
64
65
66
67
Function Setup
LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
69
69
73
74
76
VCR Functions
VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . .
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
77
77
77
78
78
79
79
Others
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . .
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80
84
85
86
87
Español
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover
2007/09/04 17:05:21
Playback
Editing
Function Setup
VCR Functions
Others
Description refers to audio CD
Description refers to video CD with PBC function
Description refers to video CD without PBC
function
Description refers to CD-RW/-R with MP3 files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
EN
Español
E9E2ZUD_BZV420MW8.indd 7
Recording
DVD mode
Deleting titles:
You can delete titles which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
Setting / clearing chapter marks:
You can set / clear chapter marks on titles.
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Basic Setup
Editing
Connections
This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after that.
The following features are offered with this unit.
Setting pictures for thumbnails:
Recording
You can change pictures for thumbnails.
Dividing titles (DVD+RW/DVD-RW only):
DVD mode VCR mode
You can divide a title into 2 or more.
This unit is compatible with DVD+RW/DVD-RW, which is
rewritable repeatedly and DVD+R/DVD-R, which is available
Putting name on disc:
for recording once. Even if you choose DVD-RW/DVD-R, these You can put your favorite disc name.
discs will automatically be recorded in the DVD+VR mode.
Compatibility
Also, this unit allows you to record to the cassette tape. You
can choose either one for your convenience.
DVD mode
Up to 12 program recording:
Available
for
playing
back
discs
on
a
regular
DVD
player:
You can program the unit to record up to 12 programs within
Recorded discs can be played back on regular DVD players,
a one-month period. Daily or weekly program recordings are
including computer DVD drives compatible with DVD-video
also available.
playback. Although DVD+R are playable on other units
One-touch timer recording (OTR):
without finalization in most cases, it is recommended to
You can easily set a recording time as you prefer. Every
finalize in order to stabilize the performance. For DVD-RW/
time [RECORD] or [REC I] is pressed during recording, the
DVD-R, you need to finalize the recorded discs to play back
recording time will be increased by 30 minutes up to 6 hours
on other DVD players.
for DVD, and 8 hours for VCR. The recording automatically
stops when the recording time you set is reached or the disc
Others
and the cassette tape is full.
Line through output
Dubbing mode:
When an external device, such as cable/satellite box, is conYou can copy a DVD disc to a cassette tape or copy a cassette nected to E1(Rear) jacks of this unit, the signal from the
tape to a DVD disc. This function will be possible only if the
external device can be output even when the power of the
DVD disc or a cassette tape is not copy protected.
unit is off.
You cannot record on a cassette tape when its erase-protection
DVD mode
Progressive scan system
tab is removed.
Unlike conventional interlace scanning, the progressive scan
Left channel stereo recording:
system provides less flickering and images in higher
This unit can record the sound of the left channel monaural
resolution than that of traditional television signals.
input as left and right channels automatically.
DVD mode
Automatic chapter mark setting:
Symbols Used in this Owner's Manual
Chapter marks will be put on recordings as you set before
attempting to record.
To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.
Automatic title list making:
* DVD-RW/-R recorded in VR mode or non compatible
The unit makes a title list with the index automatically.
recording format are not playable.
Playback
* DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in the
DVD mode
disc (refer to page 66).
Theater surround sound in your home:
* DVD-R recorded in the mode other than +VR is not
When connecting the unit to an amplifier or a decoder which
recordable on this unit.
is compatible with Dolby Digital, you can experience the theater surround sound from discs with surround sound system.
Symbol Description
Quick search for what you want to watch:
For Recording, Playing Back, and Editing
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by title,
Description refers to DVD+RW
chapter or time.
Virtual surround system:
Description refers to DVD+R
You can enjoy stereophonic space through your existing 2
channel stereo system.
Description refers to DVD-RW
Playing back MP3 files:
You can enjoy MP3 files which are recorded on CD-RW/-R.
Description refers to DVD-R
VCR mode
Quick search for what you want to watch:
Description refers to VHS tapes
You can easily find the part you want to watch using the index
Use only cassettes marked VHS (
).
search/time search functions. An index mark will be assigned
For Playback only
at the beginning of each recording you make. For time search
function, you can go to a specific point on a cassette tape by
Description refers to DVD-video
entering the exact amount of time you wish to skip.
Introduction
FEATURES
7
2007/09/04 17:05:21
FUNCTIONAL OVERVIEW
Front Panel
1
26 25
2*
3
24 23222120 19 18 17 16 15 14 13 12 11 10 9 8* 7
6 5
4
(*) The unit can also be turned on by pressing these buttons or insert a cassette tape.
1. Cassette compartment (VCR)
Insert a cassette tape here.
2. OPEN/CLOSE A button (DVD)*
Press to open or close the disc tray.
3. Disc tray (DVD)
Place a disc when it is open.
4. AUDIO input jacks (E2) (DVD/VCR)
Use to connect external device with an RCA audio
cable.
5. VIDEO input jack (E2) (DVD/VCR)
Use to connect external device with an RCA video
cable.
6. S-VIDEO input jack (E2) (DVD/VCR)
Use to connect the S-video output of external device
with an S-video cable.
7. RECORD button (DVD)
Press once to start recording.
Press repeatedly to start the one-touch timer
recording.
8. PLAY B button (DVD)*
Press to start or resume playback.
9. STOP C button (DVD)
Press to stop playback or recording.
Press to stop the proceeding timer recording in DVD.
10. DVD indicator
Lights up when the DVD output mode is selected.
11. SOURCE button (DVD/VCR)
Press to select the component you wish to operate.
12. VCR indicator
Lights up when the VCR output mode is selected.
13. D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
14. TRACKING L / K buttons (VCR)
Press to adjust the tracking during playback or in
slow motion of the cassette tape.
While playback is in still mode, you can adjust the
picture blurred vertically.
8
15. DVD REC indicator (DVD)
Lights up when recording in progress.
Flashes when a program cannot be performed for
some reason.
16. TIMER REC indicator (DVD/VCR)
Lights up when timer programming is set.
Light up during the one-touch timer recording.
Flashes when all timer programmings have finished.
17. D.DUBBING indicator (DVD/VCR)
Lights up when recording function works only from
the VCR to DVD mode.
18. VCR REC indicator (VCR)
Lights up when recording in progress.
Flashes when a program cannot be performed for
some reason.
19. Infrared sensor window (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
20. RECORD button (VCR)
Press once to start a recording. Press repeatedly to
start the one-touch timer recording.
21. PLAY B button (VCR)
Press to start playback.
22. STOP C / EJECT A button (VCR)
EJECT A button
When the unit is in stop mode, press to remove the
cassette tape from the cassette compartment.
STOP C button
Press to stop cassette tape playback or recording.
Press to stop the proceeding timer recording in VCR.
23. F.FWD D button (VCR)
Press to rapidly advance the cassette tape, or view the
picture rapidly in forward during playback (forward
search).
24. REW E button (VCR)
Press to rewind the cassette tape, or to view the
picture rapidly in reverse during playback (rewind
search).
25. y STANDBY-ON button (DVD/VCR)
Press to turn on and off the unit.
26. POWER ON indicator (DVD/VCR)
Lights up when power is on.
EN
E9E2ZUD_BZV420MW8.indd 8
2007/09/04 17:05:21
Introduction
FUNCTIONAL OVERVIEW
Rear Panel
1
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
L
OUT
S-VIDEO
DVD/VCR
IN --- AUDIO --- OUT
Y
L
L
PB
/CB
IN
R
R
COAXIAL
IN ---VIDEO --- OUT
R
9 8 7 6 5 43 2
7. COMPONENT VIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with a component video cable.
8. S-VIDEO OUT jack (DVD only)
Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
9. AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
10. COAXIAL DIGITAL AUDIO OUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder
or other device with a coaxial digital input jack with a
digital coaxial cable.
Recording
Playback
1. AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this
unit.
2. AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
3. VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
4. VIDEO IN jack (E1) (DVD/VCR)
Use to connect external device with an RCA video
cable.
5. AUDIO IN jacks (E1) (DVD/VCR)
Use to connect external device with an RCA audio
cable.
6. S-VIDEO IN jack (E1) (DVD/VCR)
Use to connect the S-video output of external device
with an S-video cable.
PR
/CR
Basic Setup
10
Connections
DIGITAL
AUDIO OUT
Note
Editing
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
Function Setup
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 9
9
2007/09/04 17:05:23
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Install the batteries (AAAx2) matching the polarity
indicated inside battery compartment of the remote
control.
1
Open the cover.
2
Insert batteries.
Using a Remote Control
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
3
Close the cover.
16feet (5m)
30˚
2
23feet (7m)
16feet (5m)
30˚
STANDBY-ON
1
18
SOURCE TIMER SET DISPLAY OPEN/CLOSE
3
A
.@/:
4
5
6
7
ABC
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
20
0
DISC MENU
SETUP
o
OK
s
B
TITLE
Note
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
10
8
9
10
11
12
13
14
15
16
17
RETURN
p
B
j
F
19
DEF
h
i
g
C
21
22
23
24
25
26
27
TRACKING
--
+
VCR
REC
DVD
28
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
29
30
31
NB552
EN
E9E2ZUD_BZV420MW8.indd 10
2007/09/04 17:05:23
Basic Setup
Recording
Playback
Editing
Function Setup
20. CLEAR button (DVD/VCR)
DVD mode:
Press to clear the password once entered or to cancel
the programming for CD or to clear the selecting
marker number in the edit menu, etc.
VCR mode:
Press to reset the tape counter.
21. SETUP button (DVD/VCR)
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
to the interlace mode.
22. Cursor K / L / { / B buttons (DVD/VCR)
Press to select items or settings.
23. RETURN button (DVD/VCR)
Press to return to the previously displayed menu screen.
24. PLAY B button (DVD/VCR)
Press to start or resume playback.
25. NEXT G button (DVD)
• During playback, press to skip to the next chapter,
track or file.
• When playback is paused, press to play back forward step by step.
26. FFW D button (DVD/VCR)
DVD mode:
• During playback, press to play back fast forward.
• When playback is paused, press to play back slow
forward.
VCR mode:
• During playback, press to rapidly advance the
cassette tape or view the picture rapidly in forward.
• When playback is paused, press to view the cassette
tape in slow motion.
27. STOP C button (DVD/VCR)
• Press to stop playback or recording.
• Press to exit from the title list.
28. DVD button
• Press to select the DVD output mode.
29. AUDIO button (DVD/VCR)
DVD mode:
• During playback, press to display the audio menu.
VCR mode:
• During playback a HiFi video tape, press to change
the audio out setting HiFi and mono.
30. D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
31. RAPID PLAY button (DVD)
During playback, press to playback in a slightly faster/slower mode with keeping the audio quality.
Connections
VCR Functions
Others
1. DISPLAY button (DVD/VCR)
Press to display the display menu on or off.
2. TIMER SET button (DVD/VCR)
Press to set the unit in the timer standby mode. In
the timer standby mode, press to cancel the mode
and to turn the unit on.
3. SOURCE button (DVD/VCR)
Press to select the appropriate input.
4. Number/Character buttons (DVD/VCR)
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main menu.
• Press to enter title names.
• Press to start the index/time search in VCR mode.
5. TIMER button (DVD/VCR)
Press to display the timer programming list.
6. DISC MENU button (DVD)
Press to display the disc menu.
7. OK button (DVD/VCR)
Press to confirm or select menu items.
8. TITLE button (DVD)
Press to display the title list.
9. PREV H button (DVD)
• During playback, press to return to the beginning of
the current chapter, track or file.
• When playback is paused, press to play back reverse
step by step.
10. REW E button (DVD/VCR)
DVD mode:
• During playback, press to fast reverse.
• When playback is paused, press to play back slow
reverse.
VCR mode:
• During playback, press to rewind the cassette tape
or to view the picture rapidly in reverse.
11. PAUSE F button (DVD/VCR)
Press to pause playback or recording.
12. TRACKING / buttons (VCR)
• Press to adjust the tracking during playback or in
slow motion of the cassette tape.
• While playback is in still mode, you can adjust the
picture blurred vertically.
13. VCR button
• Press to select the VCR output mode.
14. REC MODE button (DVD/VCR)
Press to switch the recording mode.
15. REC I button (DVD/VCR)
• Press once to start a recording.
• Press repeatedly to start the one-touch timer recording.
16. CM SKIP button (DVD)
During playback, press to skip 30 seconds.
17. SEARCH button (VCR)
Press to call up the index or time search menu.
18. STANDBY-ON y button (DVD/VCR)
Press to turn the unit on and off.
19. OPEN/CLOSE A button (DVD/VCR)
DVD mode:
Press to open or close the disc tray.
VCR mode:
Press to remove the cassette tape from the cassette
compartment.
Introduction
FUNCTIONAL OVERVIEW
Note
EN
E9E2ZUD_BZV420MW8.indd 11
Español
• If you turn off this unit, [OPEN/CLOSE A] on the remote
control is not available.
Be sure to use [OPEN/CLOSE A] or [STOP C / EJECT A]
on the unit.
11
2007/09/04 17:05:26
CONNECTION TO AN EXTERNAL TUNER
This section describes how to connect this unit to an external
tuner such as cable/satellite box.
VHF / UHF
antenna
• When you change the connections, all devices should be
turned off.
• Refer to the manual accompanying external devices for more information.
2
rear of your TV
Disconnect
1
2
disconnect
Disconnect the power cords of the devices from
the AC outlet.
or
RF coaxial cable
Cable TV
company
ANT. IN
Make the connection as illustrated below.
e.g.)
AUDIO IN
L
VIDEO IN
R
rear of your TV
RF coaxial cable
S-VIDEO
DVD/VCR
IN --- AUDIO --- OUT
ANT. IN
RCA audio
cable
L
R
IN
TV signal
RCA video cable
RF coaxial cable
S-VIDEO
OUT
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
S-VIDEO
Y
IN ---VIDEO --- OUT
PB
/CB
IN
VIDEO
OUT
AUDIO OUT
L
R
DVD/VCR
IN --- AUDIO --- OUT
L
L
R
R
IN ---VIDEO --- OUT
PR
/CR
OUT
IN
or
rear of this unit
S-video cable
RCA video cable
external tuner
RCA audio cable
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Required cables and connecting methods differ depending on the external tuner.
For more information, please contact your external tuner provider.
With this setup:
• You can record any unscrambled channel by selecting the channel on the external tuner. Be sure that the external
tuner is turned on.
• Signal from the external tuner can be output only on CVBS output even when the power of the unit is off.
• You cannot record one channel while watching another channel.
rear of your TV
3
4
Plug in the power cords of the devices to the AC outlet.
connect
After making the connection as described above, make
sure to select the appropriate video input type by
following the steps in “SETTINGS FOR THE VIDEO INPUT”
on page 13.
rear of this unit
Note to CATV system installer
• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as possible.
12
EN
E9E2ZUD_BZV420MW8.indd 12
2007/09/04 17:05:26
Introduction
SETTINGS FOR THE VIDEO INPUT
You must let the unit know which video input jack you are using before making a recording.
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
o
OK
s
B
TITLE
RETURN
B
h
i
g
Use [K / L] to select “Video Input”,
then press [OK].
Use [K / L] to select desired external
input position, then press [OK].
General Setting
Progressive Scan
TV Aspect
Video Input
Video Input
E1 (Rear)
E2 (Front)
Playback
F
Submenu will appear.
Playback
Display
Video
Recording
Clock
Reset All
p
j
Use [K / L] to select “Video”, then
press [OK].
C
TRACKING
--
+
VCR
REC
DVD
REC MODE D.DUBBING AUDIO
5
CM SKIP SEARCH RAPID PLAY
Use [K / L] to select the input jack
type to connect, then press [OK].
If you want to use VIDEO IN jack, select “Video
In”.
If you want to use S-VIDEO IN jack, select
“S-Video In”.
Editing
I
Recording
SETUP
DISC MENU
“General Setting” menu will appear.
Basic Setup
1
GHI
1
2
3
4
Connections
STANDBY-ON
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
General Setting
Progressive Scan
TV Aspect
Video Input
E1Video
(Rear)Input
Function Setup
Playback
Display
Video
Recording
Clock
Reset All
In
E1Video
(Rear)
E2S-Video
(Front)In
NB552
VCR Functions
6
Press [SETUP] to exit.
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 13
13
2007/09/04 17:05:27
CONNECTION TO A TV
Make one of the following connections, depending on the capabilities of your existing device.
VCR and basic DVD connection
RCA audio
cable
TV
R
this unit
S-VIDEO
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
S-VIDEO
Y
L
OUT
PB
/CB
COAXIAL
IN
RCA video
cable
VIDEO
IN
L
AUDIO IN
DVD/VCR
IN --- AUDIO --- OUT
L
L
R
R
DVD/VCR
IN --- AUDIO --- OUT
L
L
R
R
IN
IN ---VIDEO --- OUT
R
PR
/CR
IN ---VIDEO --- OUT
AUDIO OUT (DVD/VCR)
VIDEO OUT
Available on DVD only
Method 1
analog audio
Method 2
good picture
TV
better picture
S-VIDEO IN
COMPONENT
VIDEO IN
Y
(Green)
PB/CB
(Blue)
PR/CR
(Red)
R
L
and
AUDIO IN
or
RCA audio cable
this unit
DIGITAL
AUDIO OUT
S-video cable
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
Y
L
OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
(Green)
Y
(Blue)
DVD
AUDIO
S-VIDEO
OUT
L
P
COAXIAL
R
DIGITAL
AUDIO OUT
Y
Y
DIGITAL
AUDIO OUT
component video cable
P
OUT
PB
/CB
L
OUT
PB
/CB
R
PR
/CR
AUDIO OUT (DVD)
L
OUT
PB
/CB
COAXIAL
COAXIAL
COAXIAL
R
S-VIDEO OUT
PR
/CR
(Red)
R
PR
/CR
COMPONENT
VIDEO OUTPUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
After you have completed the connections
• Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original
remote control that selects an external input channel until the DVD recorder’s opening picture appears. Check your
TV’s manual for details.
Note
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
• You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when
you made either S-video or component video out connection.
• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
To set progressive scan mode, refer to page 75
• This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the
traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”.
14
EN
E9E2ZUD_BZV420MW8.indd 14
2007/09/04 17:05:28
Digital Audio Connection
2 Channel Analog Audio Connection
stereo system
Dolby Digital decoder,
MD deck or DAT deck
audio
Connections
digital audio
coaxial input
jack
COAXIAL
R
Introduction
CONNECTION TO AN AUDIO SYSTEM
L
AUDIO IN
digital audio
coaxial cable
or
RCA audio cable
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
S-VIDEO
Y
OUT
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
L
OUT
PB
/CB
COAXIAL
COAXIAL
IN
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
L
Y
R
PB
/CB
DVD/VCR
IN --- AUDIO --- OUT
L
L
R
R
IN
L
IN ---VIDEO --- OUT
R
R
S-VIDEO
Y
DIGITAL
AUDIO OUT
PR
/CR
OUT
IN ---VIDEO --- OUT
PR
/CR
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
S-VIDEO
Y
L
OUT
PB
/CB
IN
COAXIAL
COAXIAL
Recording
L
PB
/CB
DVD/VCR
IN --- AUDIO --- OUT
Basic Setup
analog audio
input jacks
DVD/VCR
IN --- AUDIO --- OUT
L
L
R
R
IN ---VIDEO --- OUT
R
PR
/CR
PR
/CR
R
this unit
AUDIO OUT
DIGITAL AUDIO OUTPUT
Playback
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
If output is Dolby Digital encoded audio, connect to a Dolby
Digital decoder.
Stream
PCM
If not connected to any external devices.
PCM
Function Setup
Connecting to an MD deck or DAT deck.
Editing
Connection
Setting Setup >General Setting >Playback >Disc Audio >
Dolby Digital
* To complete these settings, refer to page 71.
Note
VCR Functions
• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 15
15
2007/09/04 17:05:29
THE VCR / DVD RECORDER SWITCHING
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish
to operate with [SOURCE].
DVD mode
VCR mode
Press [DVD] on the remote control.
(Verify that the DVD indicator is lit.)
Press [VCR] on the remote control.
(Verify that the VCR indicator is lit.)
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
DISC MENU
SETUP
o
OK
s
B
TITLE
RETURN
p
DVD indicator
B
j
F
h
i
g
C
TRACKING
SOURCE button
--
+
VCR
VCR indicator
REC
DVD
VCR button
DVD button
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
NB552
Note
• You cannot switch to another mode (DVD or VCR) during in the timer-standby mode.
16
EN
E9E2ZUD_BZV420MW8.indd 16
2007/09/04 17:05:30
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.
The on-screen display changes in the following order
as you press [DISPLAY].
VCR mode
Connections
On-Screen Display / Menu
1
12:00AM
OFF
2
6
DVD mode
HIFI
3
4
5
Indicates current video status.
Indicates the current time.
Indicates a recording or playing back mode.
Indicates a tape counter.
Audio status of the current cassette tape.
Note
1/ 5
• This is an example screen only for explanation.
Displayed items are depending on the disc you
inserted.
0:01:00 / 1:23:45
DVD Video
E1 (Rear)
5
1
Playback
1/ 5
0:00:00
Recording
Disc Information / Menu
1.
2.
3.
4.
5.
SP
Basic Setup
Disc Information/Menu
Title Name Information
(only when DVD+RW/DVD+R/DVD-RW/DVD-R
is in playback)
or
File Name Information
(only when a CD with MP3 files is in playback)
Introduction
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
2
Title/File Name Information
1:53
Title Name Information
Editing
SP(2Hr)
Title Name
4
3
* This is an example screen only for explanation.
4. Indicates an operation status.
5. Each icon means:
: Marker
: Audio
: Noise Reduction
: Subtitle
: Zoom
: Angle
: Surround
File Name Information
File Name
My File
1
1. Displays title/file name.
VCR Functions
: Search
1
Function Setup
1. Indicates a disc type and format mode.
2. Indicates the selected external input position.
3. Indicates a recording mode and possible recording
time left.
My Title
: Repeat
Others
6. Indicates the current title number/total number of
titles, the current chapter number/total number of
chapters, and time lapse of the current title playback/
total duration of the title.
Español
EN
E9E2ZUD_BZV420MW8.indd 17
17
2007/09/04 17:05:32
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
Main Menu
Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [OK] to display the
menu. These menus provide entries to all main functions
of the unit.
Setup
1
2
3
4
5
General Setting
Timer Programming
Title List
Disc Edit
CD Playback Mode
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
To call up the title list.
4. Disc Edit:
To set up the DVD disc setting.
5. CD Playback Mode:
To set up the CD playback setting.
• “CD Playback Mode” is available only when an audio
CD, a video CD, a CD-RW/-R with MP3 files is inserted
into the unit.
General Setting Menu
1
2
3
4
5
6
2
1. Playback:
To set up the unit to play back discs as you prefer.
2. Display:
To set up the OSD screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Reset All:
To reset the setting to the factory default.
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Disc Edit / CD Playback Mode
<Disc Edit menu (DVD+RW)>
Disc Edit
1
2
3
4
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
<Disc Edit menu (DVD-RW)>
Disc Edit
1
2
3
4
Edit Disc Name
Erase Disc
Finalize
Disc Protect OFF
ON
<Disc Edit menu (DVD+R/DVD-R)>
Disc Edit
1
3
2
4
3
Edit Disc Name
Finalize
Disc Protect OFF
ON
<CD Playback Mode menu>
CD Playback Mode
5
1
6
2
7
3
18
Random Play
Program Play
PBC (Video CD only)
1. Edit Disc Name:
Allows you to rename the disc.
2. Erase Disc: (DVD+RW/DVD-RW only)
Allows you to erase all contents in the disc and format it.
3. Make Edits Compatible: (DVD+RW only)
Allows you to memorize the editing status on the disc if
you have added or deleted chapters, or made chapters
hidden on this unit, and to effect it when playing back
on the other unit.
Finalize: (DVD+R/DVD-RW/-R only)
Allows you to finalize a disc containing recorded titles.
4. Disc Protect :
Allows you to protect a disc from accidental editing or
recording.
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (audio CD/video CD only)
Allows you to activate the program playback feature.
7. PBC (Video CD only):
Allows you to select images or information on the menu
screen by activating PBC (playback control) function.
EN
E9E2ZUD_BZV420MW8.indd 18
2007/09/04 17:05:32
Introduction
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
5
6
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
Turn the TV on. Select the input to
which the unit is connected.
Use [K / L] to select your desired
language, then press [OK] to set
language.
Initial Setup
OSD Language
0
DISC MENU
Basic Setup
4
PQRS
1
2
Connections
STANDBY-ON
Press [STANDBY-ON y].
English
Français
Español
SETUP
o
B
RETURN
p
B
j
F
h
i
g
C
Clock Setting
TRACKING
--
REC
--- / -- / ---- (---)
-- : -- --
+
VCR
Initial Setup
Playback
3
Press [OK] to activate “Clock Setting”.
Recording
OK
s
TITLE
DVD
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
Editing
4
Proceed to step 4 in “Clock Setting”
on page 20.
Function Setup
NB552
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 19
19
2007/09/04 17:05:33
SETTING THE CLOCK
Set the clock before you try the timer programming.
Clock Setting
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
SETUP
DISC MENU
1
2
3
o
OK
s
B
TITLE
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Clock”, then
press [OK].
Use [K / L] to select calendar or time,
then press [OK].
General Setting
Playback
Display
Video
Clock Setting
Recording
JAN / 01 / 2007 ( MON )
Clock
12 : 00 AM
Reset All
RETURN
p
B
j
F
h
i
g
C
TRACKING
--
+
VCR
REC
DVD
4
REC MODE D.DUBBING AUDIO
I
Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[OK].
General Setting
CM SKIP SEARCH RAPID PLAY
Playback
Display
Video
Clock Setting
Recording
JAN / 01 / 2007 ( MON )
Clock
12 : 00 AM
Reset All
Your setting will be activated.
The clock start counting when you press [OK].
NB552
5
Press [SETUP] to exit.
Note
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds.
• For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2007
up to 2056.
20
EN
E9E2ZUD_BZV420MW8.indd 20
2007/09/04 17:05:34
Introduction
INFORMATION ON DVD RECORDING
Before you make a recording, read the following information.
Recordable Discs
Recording Mode
Logo
You can select a recording mode among 6 options, and
the recording time will depend on the recording mode
you select as follows.
Disc size
Attributes
DVD+RW
12cm Disc
HQ (1Hr)
18 min
SP (2Hr)
36 min
SPP (2.5Hr)
45 min
LP (3Hr)
54 min
Video/sound
quality
(good)
EP (4Hr)
72 min
SLP (6Hr)
108 min
(poor)
HQ (1Hr)
60 min
(good)
SP (2Hr)
120 min
SPP (2.5Hr)
150 min
LP (3Hr)
180 min
EP (4Hr)
240 min
SLP (6Hr)
360 min
Recording
DVD-RW
DVD+R
8cm/12cm, single-sided,
single layer disc
Approx. max. recording time
(SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
Recording
time
Basic Setup
8cm Disc
Recording
mode
Connections
This unit can record to DVD+RW, DVD+R, DVD-RW and
DVD-R.
DVD+R/DVD-R can only be recorded to once. DVD+RW/
DVD-RW can be recorded to and erased many times.
DVD-RW/-R will be recorded in the DVD+VR mode
automatically in this unit.
(poor)
DVD-R
Note
Function Setup
VCR Functions
• This unit cannot record to CD-RW or CD-R.
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
• You cannot record copy-protected program using
this unit. (Copy-protected signal is included in DVDvideo or some satellite broadcasts.)
• You cannot record “copy-once only” program on
DVD.
Editing
Unrecordable Discs
• DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 66).
• DVD-R recorded in the mode other than +VR is not
recordable on this unit.
• The recording time is only an estimate. The actual
recording time may differ.
• The audio and video quality gets poorer as the recording
time becomes longer.
• Each time [REC MODE] is pressed, recording mode and
its allowed recording time will be displayed.
Playback
• Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition the unit
may not read the disc properly.
Verbatim
DVD+R 8x,
DVD+RW 4x,
DVD-R 8x,
DVD-RW 2x
JVC
DVD-RW 4x
Maxell
DVD+R 4x/8x/16x, DVD-R 8x/16x
SONY
DVD+R 4x/8x/16x, DVD+RW 4x
TDK
DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.
• You can play back DVD+RW on most DVD players
without finalizing. However, if you have added or
deleted chapters, or made chapters hidden, you
must perform “Make Edits Compatible” before being
able to see those effects on other units. (Refer to
page 67 for more details.) To play back discs other
than DVD+RW on other DVD players, you will need
to finalize.
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 21
21
2007/09/04 17:05:35
BEFORE RECORDING
Make Recording Compatible
Setting for Auto Chapter
You can set a specified time for chapter marks.
Use this feature to make the unfinalized +VR mode discs
recorded on other unit recordable on this unit. When you
make an additional recording on this unit with “Make
Recording Compatible” set to “ON”, the title menu is
automatically converted to our style.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
“General Setting” menu will appear.
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
“General Setting” menu will appear.
3) Use [K / L] to select “Auto Chapter”, then press [OK].
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
4) Use [K / L] to select a desired time option, then
press [OK].
General Setting
3) Use [K / L] to select “Make Recording Compatible”,
then press [OK].
Playback
Display
Video
Recording
Clock
Reset All
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Auto Chapter
AutoCompatible
Finalize
Make Recording
Dubbing Mode
ON
Make Recording Compatible
OFF
Auto Chapter
Auto Finalize
Auto Chapter
Dubbing Mode
OFF Make Recording Compatible
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
5) Press [SETUP] to exit.
Note
ON:
OFF:
Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
Prohibiting additional record to the disc that
has a title list created by other units.
• The interval for auto chapter marks may slightly
differ.
• A blank chapter may be created depending on the
remaining time of the disc.
5) Press [SETUP] to exit.
22
EN
E9E2ZUD_BZV420MW8.indd 22
2007/09/04 17:05:36
Follow the steps to record TV programs from an external
tuner.
This unit has no tuner system so cannot receive TV
broadcasts without external tuner or such devices.
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
Align the disc to
the disc tray guide.
0
* Make sure the disc is compatible with this unit.
(Refer to page 21 for the list of compatible discs.)
SETUP
o
OK
B
TITLE
RETURN
p
B
3
• When inserting a brand-new DVD+RW/DVDRW, the unit automatically starts to format.
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
C
g
TRACKING
--
+
VCR
REC
It may take a while to load
the disc completely.
DVD
REC MODE D.DUBBING AUDIO
CM SKIP SEARCH RAPID PLAY
4
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 21 for DVD.
Function Setup
NB552
SP(2Hr)
0:58
EN
Español
Instructions continue on the next page.
Others
Press [SOURCE] to select the
appropriate external input position
(E1/E2) to which your external tuner
is connected. Then select the desired
channel to record on the external
tuner.
VCR Functions
5
Editing
I
E9E2ZUD_BZV420MW8.indd 23
Playback
h
i
Press [OPEN/CLOSE A] to close the
disc tray.
Recording
DISC MENU
F
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
Basic Setup
1
j
Press [DVD].
DEF
GHI
s
Turn on the TV and be sure to select the input to
which the unit is connected.
Connections
STANDBY-ON
1
2
Press [STANDBY-ON y].
Introduction
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
23
2007/09/04 17:05:37
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
6
Press [REC I] to start recording.
“I” will be displayed for 5 seconds.
7
Press [STOP C] to stop recording.
The recorded title will appear in the title list.
(Refer to “Guide to a Title List” on page 55.)
e.g.) DVD+R
I
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC I] again to restart
recording.
Writing to Disc
90%
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 6 hours) appears on the TV screen.
One-touch timer recording will start.
I
1
SP(2Hr)
NOV/21/07 11:00AM E1 SP
NOV/21/07 0:20:44
2
EMPTY TITLE
1:41:17 SP(2Hr)
0:30
• Press [STOP C] to exit the title list.
0:30
(normal recording)
6:00
1:00
5:30
• To cancel one-touch timer recording within the
specified time, press [STOP C].
Note
•
•
•
•
•
When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.
This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
When the unit clock has not been set, the space for a date and time of title names will be blank.
You cannot change the recording mode during the recording pause mode.
You can change a channel to be recorded during the recording pause mode.
Note for one-touch timer recording
• Press [DISPLAY] to see the remaining recording time on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power to stop one-touch timer recording.
- Using [REC I] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode
and the VCR keeps the current mode.
• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby
mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby
mode to use the unit continuously.
24
EN
E9E2ZUD_BZV420MW8.indd 24
2007/09/04 17:05:38
SOURCE TIMER SET DISPLAY OPEN/CLOSE
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
SPACE
CLEAR
0
JAN/ 2/07 12:00 AM E1 SP
SP (1:00)
MON JAN/01 11:00AM
Date
JAN/02
5
1 Title of a timer program (Contains date, time, selected
external input position, recording mode of the program)
2 Current date and time
3 Recording mode, and length of the recording
4 Timer program list
5 Total number of pages and current page (2 pages
maximum)
1
2
Press [TIMER].
Use [K / L] to select “New Program”,
then press [OK].
Timer Programming
MON JAN/01 11:00AM
Date
OK
E1/E2
E1
1/1
o
s
Start
End
12:00AM 1:00AM
New Program
4
SETUP
DISC MENU
2
Playback
7
TIMER
1
Timer Programming
Recording
A
.@/:
3
Start
End
New Program
E1/E2
B
TITLE
RETURN
Editing
p
1/1
B
j
F
h
i
g
C
TRACKING
+
VCR
DVD
3
Use [K / L] to enter the date, then
press [B].
Function Setup
--
Timer Programming
MON JAN/01 11:00AM
REC
Basic Setup
STANDBY-ON
Guide to Timer Programming Display
Connections
You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Connect the external tuner to either E1 or E2 and set it
to output audio/video signals when it comes to the time
you want to start recording.
• Do not change the external tuner’s channel while you
are recording. You cannot watch one channel and
record another at the same time.
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space or
a cassette tape with a erase-protection tab.
Introduction
TIMER RECORDING
REC MODE D.DUBBING AUDIO
Date
Date
JAN/02
E1/E2
E1
I
CM SKIP SEARCH RAPID PLAY
Start
End
New Start
Program
--:-REC To
DVD
E1/E2
End
--:-Mode
SP
SP
2 : 00
VCR Functions
1/1
JAN/01
MON-FRI
When pressing [L] at
the current date, the
date will change as
follows.
SAT
e.g.) January 1st
p
Daily
p
MON-SAT
NB552
p
Others
p
p
p
p
FRI
SUN
p
Instructions continue on the next page.
EN
E9E2ZUD_BZV420MW8.indd 25
Español
JAN/31
25
2007/09/04 17:05:39
TIMER RECORDING
4
Use [K / L] or [the Number buttons]
to enter the start and end time, then
press [B].
Timer Programming
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
MON JAN/01 11:00AM
Date
Date
JAN/02
E1/E2
E1
Start
End
New Start
Program
12 : 00AM
REC To
DVD
SP
Use [K / L] to select the appropriate
external input position (E1/E2) to
which your external tuner is
connected, then press [B].
8
9
Press [TIMER SET] to set a timer
programming.
E1/E2
End
1 : 00AM
Mode
SP
SP
1 : 00
1/1
6
Use [K / L] to select a recording
media (“DVD” or “VCR”), then press
[B].
Date
Date
JAN/02
E1/E2
E1
Start
End
New Start
Program
12 : 00AM
REC To
DVD
1 : 00
1/1
7
Use [K / L] to select a recording
mode.
Date
Date
JAN/02
E1/E2
E1
Start
End
New Start
Program
12 : 00AM
REC To
DVD
E1/E2
End
1 : 00AM
Mode
SP
SP
1 : 00
1/1
Refer to “Recording Mode” on page 21 for DVD
or “Recording” on page 77 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording mode.
Date
JAN/02
E1/E2
E1
Start
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
SP
SP
26
1 : 00
Your program setting is now stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 27.
TIMER REC indicator will light up on the front
panel.
Note
E1/E2
End
1 : 00AM
Mode
SP
SP
0 : 00
Press [OK] when all items are entered.
MON JAN/01 11:00AM
Start
End
New Start
Program
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
Auto
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
Timer Programming
Date
Date
JAN/02
E1/E2
E1
Start
12 : 00AM
REC To
DVD
Auto
2 : 00
1/1
5
Date
JAN/02
E1/E2
E1
E1/E2
End
--:-Mode
SP
• If you have not set the clock yet:
“Clock Setting” menu will appear instead of the timer
programming list at step 1. Continue with the step 4
in “Clock Setting” on page 20 before setting a timer
programming.
• Use [s / B] to move the cursor to the left and the
right in “Timer Programming” menu.
• If a basic recording or one-touch timer recording is in
progress on one component (e.g., VCR) and the timer
recording set for the other component (e.g., DVD) is
about to begin, the unit automatically switches to the
programmed channel for timer recording 2 minutes
before the programmed starting time, and the
recording in progress (for VCR) will be canceled
UNLESS their recording channels are the same. If their
recording channels are the same, the timer recording
will start without canceling the recording currently in
progress. In this case, the recording of the same
channel will be made on both DVD and VCR.
• Cancel the timer-standby mode by pressing
[TIMER SET] before operation for either DVD or VCR.
When finished operating, press [TIMER SET] to
resume the timer-standby mode.
• In the timer-standby mode, you can turn on the
power and use the component (VCR or DVD) which is
not currently timer-programmed.
EN
E9E2ZUD_BZV420MW8.indd 26
2007/09/05 10:53:45
Checking, canceling, or correcting the timer
programming information
1) Press [TIMER SET].
TIMER REC indicator will light off on the front panel.
If the timer program did not complete correctly,
the error number appears in the timer programming list.
Timer Programming
Connections
2) Press [TIMER].
TUE JAN/02 11:00AM
3) Check the information on the list you will need.
E41
Date
JAN/02
Timer Programming
Start
End
12:00AM 1:00AM
New Program
E1/E2
E1
JAN/ 2/07 12:00 AM E1 SP
SP (1:00)
MON JAN/01 11:00AM
Start
End
12:00AM 1:00AM
New Program
E1/E2
E1
1/1
Basic Setup
Date
JAN/02
Each error number means:
1/1
To stop the timer recording in progress
E42
No disc when
recording
E25-26 Copy prohibited
program
E43
Already 49 titles
recorded
E29
Disc protected
E44
Already 254 chapters
recorded
E30
Disc full
E45
Copy prohibited
program
E35
PCA full *1
E46
E36
Already finalized
video format disc
E40
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
It is impossible to
record additionally
on a disc recorded
by other units
when setting “
Make Recording
Compatible” to “OFF”.
Unrecordable disc
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
*1 PCA is a disc's space reserved for recording test.
Note
VCR Functions
• Press [TIMER] to check the timer recording in progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
Function Setup
Press [STOP C] to stop the disc recording or
[STOP C/EJECT A] to stop the cassette tape recording
on the front panel of the unit.
[STOP C] on the remote control is not effective.
E24
Editing
6) Press [TIMER SET] to return to the timer standby
mode.
Power failed
Playback
5) Press [TIMER] to exit.
E1-22 Recording error other E41
E37-39 than below
Recording
4-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [OK].
2 Use [K / L] to select “Delete”, then press [OK].
Confirmation window will appear.
3 Use [K / L] to select “Yes”, then press [OK].
4-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [OK].
2 Use [K / L] to select “Program Change”, then
press [OK].
3 Correct the timer program by using
[K / L / { / B], then press [OK].
Introduction
TIMER RECORDING
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 27
27
2007/09/11 17:05:34
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
• If a disc is not inserted, TIMER REC indicator on the front
panel flashes and timer recording cannot be performed.
In some cases, TIMER REC indicator will light up
momentarily around the start point as the unit attempts
to record. Please insert a recordable disc.
• If a cassette tape with a erase-protection tab is not in the
cassette compartment or there is no cassette tape in the
cassette compartment, VCR REC indicator on the front
panel flashes and timer recording cannot be performed.
Please insert a recordable cassette tape.
• If you press [TIMER SET] and turn on the unit while
either DVD or VCR is in timer standby mode (TIMER REC
indicator will light off). In this case, you cannot change
the mode between DVD and VCR. You cannot change
any settings using [SETUP] or edit discs.
• When all the timer recording is completed, TIMER REC
indicator flashes. To play back or eject the recorded disc,
press [TIMER SET] first, then select the recorded title
and press [PLAY B], or [OPEN/CLOSE A] to remove the
disc.
• If both DVD and VCR are timer programmed, you cannot
use any functions for either unit during timer standby or
timer recording. If you want to use functions other than
recording under such condition, cancel timer recording
by pressing [TIMER SET] during timer standby or stop
recording by pressing [STOP C] on the front panel
during timer recording.
• To cancel the timer standby mode, press [TIMER SET].
• When the starting and the ending time are the same, the
length of the recording will be set for 24 hours. When
the disc or cassette tape becomes full during the
recording, the unit turns itself off.
• When the programmed starting and ending time are
earlier than the current time, the setting will not be
accepted and be cleared for redoing.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
you turn the power off.
• The timer recording for digital TV cannot record any
audio language other than English.
• The timer recording cannot be performed in DVD and
VCR at the same time. If you set 2 programming with the
same channel and time in both devices, the program
with a lower program number will be recorded.
The Priority of Overlapped Settings
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When two or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be canceled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
PROG. A
PROG. B
actual
PROG.
PROG.AA
PROG. B
recording
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minute or more, this
program will be displayed with error number E40 in the
timer programming list.
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
28
EN
E9E2ZUD_BZV420MW8.indd 28
2007/09/04 17:05:43
1
2
3
Press [SETUP].
4
Use [K / L] to select the time, media
and recording mode, then press [OK].
Connections
Use [K / L] to select “Timer
Programming”, then press [OK].
Use [K / L] to select “Satellite Link”,
then press [OK].
Timer Programming
Timer Programming
Satellite Link
Recording
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
Satellite Link
Start
DVD
VCR
Mode
5:00PM
DVD
SP (2Hr)
To Standby Mode
SETUP
DISC MENU
Playback
.@/:
Basic Setup
You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• Satellite link accepts only the connection from E1 (rear)
with the external tuner. (The connection from E2 cannot
read any signals from the external tuner.)
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Introduction
SATELLITE LINK
o
B
RETURN
p
B
j
h
g
C
5
Use [K / L] to set the desired starting
time, then press [B].
6
7
Use [K / L] to select a recording
media (“DVD” or “VCR”), then press
[B].
TRACKING
--
+
VCR
REC
DVD
REC MODE D.DUBBING AUDIO
CM SKIP SEARCH RAPID PLAY
VCR Functions
I
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in step 5 to set the desired
minutes.
• If you wish to go back to the left, press [{].
Use [K / L] to select the recording
mode.
Refer to page 21 for details.
Others
NB552
EN
Español
Instructions continue on the next page.
E9E2ZUD_BZV420MW8.indd 29
Function Setup
F
i
Editing
OK
s
TITLE
29
2007/09/04 17:05:43
SATELLITE LINK
8
9
Press [OK].
“To Standby Mode” is highlighted.
Press [OK] again.
Satellite Link
Start
DVD
VCR
Mode
5:00PM
DVD
SP (2Hr)
To Standby Mode
In a second, the unit will be turned off
automatically as it goes into the satellite link
standby mode.
To cancel the satellite link function while in
the satellite link standby mode:
Press [TIMER SET] to turn on the unit.
To cancel the satellite link function while the
satellite link recording is in progress:
Press [STOP C] on the front panel of the unit.
Note
• If the signal of external input breaks up over 5 seconds, satellite link function will be canceled.
• If you have not set the clock, “Clock Setting” menu will appear at step 3. Follow to step 3 in “Clock Setting” on
page 20.
• You cannot set the end time for the satellite link timer recording on this unit.
• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer
recording.
• You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 13 for more
information.
• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are
recorded as illustrated below.
• Press [TIMER] during the satellite link timer recording to check the satellite link timer recording in progress.
example 2
example 1
timer
recording
timer
recording
satellite link
satellite link
satellite link
actual
recording
actual
recording
actual
recording
The first 2 minutes (at the longest) will be cut off.
30
example 3
timer
recording
The first 2 minutes (at the longest) will be cut off.
EN
E9E2ZUD_BZV420MW8.indd 30
2007/09/04 17:05:45
Overwriting from the Beginning of
the Title
2) Load the disc that includes a title to be overwritten.
Title list will appear.
If the title list does not appear, press [TITLE].
3) Press [REC MODE] to select a recording mode.
Refer to “Recording Mode” on page 21.
1
SP (2Hr)
NOV/21/07 11:00AM E1 SP
NOV/21/07 0:20:44
2) Use [K / L] to select “Play”, then press [OK].
Playback will start.
3) Press [PAUSE F] at the point from which you want
to start overwriting.
4) Press [REC I].
“F I”, display menu, channel, and the time lapse will
be displayed as illustrated on the left.
5) Press [SOURCE] to select the appropriate external
input position (E1/E2) to which your external tuner
is connected. Then select the desired channel to
record on the external tuner.
Recording
4) Use [K / L] to select a title to be overwritten, then
press [OK].
You can overwrite the existing title from the selected
position.
1) Follow the steps 1, 2 and 4 on the left.
Basic Setup
It takes a while to display
the title list.
Overwriting in the Middle of the Title
Connections
You can overwrite the existing title from the beginning.
1) Press [STANDBY-ON y].
Make sure that the TV input is set on the unit.
Introduction
OVERWRITING UNNECESSARY TITLE
2
NOV/22/07 11:35AM E1 EP
NOV/22/07 0:10:33
5) Use [K / L] to select “Overwrite”, then press [OK].
Play
Edit
Overwrite
1
Playback
6) Press [REC I] again.
Overwriting recording starts.
3
7) Press [STOP C] to stop recording.
SP (2Hr)
This operation may take a
while to be completed.
NOV/21/07 11:00AM E1 SP
NOV/21/07 0:20:44
2
1
1
Note
• Recording mode of the overwriting title is the same
as that of the original (overwritten) title when
overwriting in the middle of the title.
• Title name will not be overwritten.
Function Setup
selected title number
to be overwritten
Editing
6) Press [SOURCE] to select the appropriate external
input position (E1/E2) to which your external tuner
is connected. Then select the desired channel to
record on the external tuner.
e.g.) DVD+RW
0:01:00
+RW
E1 (Rear)
SP(2Hr)
VCR Functions
FI
2:00
7) Press [REC I].
Overwriting recording starts.
The elapsed-time counter starts running.
Others
8) Press [STOP C] to stop recording.
Title name is also overwritten.
This operation may take a
while to be completed.
Note
Español
• The remaining recording time is displayed on the
bottom right corner of the TV screen during
overwriting.
EN
E9E2ZUD_BZV420MW8.indd 31
31
2007/09/04 17:05:45
OVERWRITING UNNECESSARY TITLE
Hints for Overwriting
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion
please check if there is no important title after the overwriting point.
When overwriting title is shorter than the existing title:
(overwriting from the beginning of the title)
overwrite
recording : A
30 - 180 seconds will be cut off.
after
overwriting
existing title : B
title name : A
title name : B
When overwriting title is longer than the existing title:
(overwriting from the beginning of the title)
overwrite
recording : A
after
overwriting
existing title : B
title name : A
overwrite
recording : A
existing title : B
30 - 180 seconds will be cut off.
after
overwriting
title name : A
title name : C
existing title : C
When overwriting in the middle of the title:
overwrite
recording : A
existing title : B
30 - 180 seconds will be cut off.
after
overwriting
title name : B*
title name : B
*Overwritten section and the rest of the sections will
have the same title name as the original existing
title (B).
Note
• When a title name is overwritten, its thumbnail is also overwritten.
• “Auto Chapter” interval time is reset at the overwriting start point.
• A chapter mark is put the beginning of the overwrite title when overwriting in the middle of the title.
32
EN
E9E2ZUD_BZV420MW8.indd 32
2007/09/04 17:05:47
Introduction
EXTERNAL DEVICE RECORDING
Connection to an External Device
Connect the external device properly to either E2 (front) or E1 (rear) input jacks of this unit by using S-video or RCA
audio / video cables.
Connections
or
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
R
L
S-VIDEO
OUT
external device
VIDEO
OUT
AUDIO OUT
R
L
(camcorder, VCR etc.)
or
RCA
video
cable
RCA
audio
cable
S-video
cable
S-VIDEO
or
RCA
video
cable
Basic Setup
S-video
cable
RCA
audio cable
DVD/VCR
IN --- AUDIO --- OUT
L
R
R
Recording
IN
L
IN ---VIDEO --- OUT
or
E2
to E2 IN
to E1 IN
E1
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
S-VIDEO
DVD/VCR
IN --- AUDIO --- OUT
L
L
R
R
IN ---VIDEO --- OUT
R
front of this unit
rear of this unit
After making the connection as described above, make sure to select the appropriate video input type by following the
steps in “SETTINGS FOR THE VIDEO INPUT” on page 13.
Editing
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Playback
IN
COAXIAL
Function Setup
Note
• When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front).
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 33
33
2007/09/04 17:05:47
EXTERNAL DEVICE RECORDING
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 33.
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
1
2
SETUP
o
OK
s
When you want to record to a
cassette tape:
Press [VCR].
Insert the cassette tape with a eraseprotection tab into the cassette
compartment.
B
TITLE
RETURN
p
B
j
F
h
i
g
C
TRACKING
--
+
VCR
REC
DVD
3
Select the input of the unit which the
external device is connected. (E2 or
E1)
4
5
6
7
Press [REC MODE] to select a
recording mode.
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
1
7 5
2
7 5
When you want to record to the disc:
Press [DVD].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
It takes a while to load
the disc.
0
DISC MENU
Turn on the TV and press
[STANDBY-ON y], and be sure to
select the input of the TV to which
the unit is connected.
• To use the input jacks on the rear of this unit;
Select “E1 (Rear)” position by using [SOURCE].
• To use the input jacks on the front of this unit;
Select “E2 (Front)” position by using [SOURCE].
Refer to “Recording Mode” on page 21 for DVD
or “Recording” on page 77 for VCR.
Press [RECORD] (DVD or VCR) on the
unit to start recording.
Start playback on the external device
to record from.
For disc:
Press [STOP C] on the unit to stop
recording.
For cassette tape:
Press [STOP C/EJECT A] on the unit
to stop recording.
This operation may take a
while to be completed.
34
EN
E9E2ZUD_BZV420MW8.indd 34
2007/09/04 17:05:48
To prevent accidental recording, editing or erasing the
titles, you can protect them from “Disc Edit” menu.
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
5
6
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
Use [K / L] to select “Disc Protect
OFF ON”, then press [OK].
e.g.) DVD+RW
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
0
SETUP
DISC MENU
Use [K / L] to select “Disc Edit”, then
press [OK].
Basic Setup
4
PQRS
1
2
3
Press [SETUP].
Connections
STANDBY-ON
Introduction
SETTING A DISC TO PROTECT
o
Recording
OK
s
B
TITLE
RETURN
p
B
j
F
h
i
g
C
+
VCR
REC
DVD
REC MODE D.DUBBING AUDIO
I
4
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Protect this disc?
Disc Protect OFF ON
Playback
TRACKING
--
Use [K / L] to select “Yes”, then press
[OK].
Yes
No
CM SKIP SEARCH RAPID PLAY
Editing
A disc will be protected.
Function Setup
This operation may take a
while to be completed.
NB552
VCR Functions
Note
To cancel the disc protect:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON” at step 3.
Others
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect ON OFF
Español
To release the protect for the disc, select “Yes” at step 4.
EN
E9E2ZUD_BZV420MW8.indd 35
35
2007/09/04 17:05:50
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
You will need to finalize discs to play back in other DVD
players.
Finalizing may take several minutes up to an hour.
A shorter recording period on the disc will require a
longer time period for finalization. Do not unplug the
power cord during finalization.
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
1
2
3
4
Press [SETUP].
Use [K / L] to select “Disc Edit”, then
press [OK].
“Disc Edit” menu will appear.
Use [K / L] to select “Finalize”, then
press [OK].
Use [K / L] to select “Yes”, then press
[OK].
e.g.) DVD+R, DVD-R
Disc Edit
Edit Disc Name
Finalize
Disc Protect OFF
CLEAR
0
SETUP
DISC MENU
Yes
No
o
OK
s
Finalizing will start.
B
TITLE
ON
Finalize disc?
RETURN
p
Finalizing
B
j
90%
i
To cancel finalizing...
F
h
C
g
TRACKING
--
+
VCR
REC
DVD
(DVD-RW only)
• To cancel finalizing at step 4, press [STOP C], select
“Yes” with [K / L], then press [OK]. Finalizing is
canceled and the unit will be in stop mode.
REC MODE D.DUBBING AUDIO
I
Do you want to cancel ?
CM SKIP SEARCH RAPID PLAY
Yes
No
Finalizing
Note
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
• There is no need to finalize DVD+RW.
• When you insert a DVD-RW finalized with this unit,
“Undo Finalize” will appear instead of “Finalize”.
5%
• If
appears when pressing [STOP C], you cannot
cancel finalizing because the finalizing has been in
certain progress.
• When selecting “No” and press [OK] or [RETURN],
finalizing will be continued.
• You cannot cancel finalizing the DVD+R/DVD-R once
it has started.
Disc Edit
Edit Disc Name
Erase Disc
Undo Finalize
Disc Protect ON
OFF
To release the finalizing for the disc, select “Undo
Finalize” at step 3.
* DO NOT power off during finalization, this will result
in malfunction.
36
This operation may take a
while to be completed.
5
Finalizing is completed.
EN
E9E2ZUD_BZV420MW8.indd 36
2007/09/04 17:05:51
Introduction
PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing
STANDBY-ON
A
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
SETUP
DISC MENU
o
OK
s
B
“Recording” menu will appear.
Use [K / L] to select “Auto Finalize”,
then press [OK].
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Auto Chapter
Auto Finalize
Auto Finalize
Dubbing Mode
Disc Full Make Recording Compatible
End of Timer Rec
RETURN
Playback
TITLE
Use [K / L] to select “Recording”,
then press [OK].
p
B
j
F
h
i
g
C
TRACKING
--
+
REC
DVD
5
Use [K / L] to select “ON”, then press
[OK].
Editing
VCR
e.g.) “Disc Full”
General Setting
REC MODE D.DUBBING AUDIO
I
Auto Chapter
Auto Finalize
Auto Finalize
Disc Full Dubbing Mode
Disc Full Make Recording Compatible
EndON
of Timer Rec
OFF
Function Setup
Playback
Display
Video
Recording
Clock
Reset All
CM SKIP SEARCH RAPID PLAY
Your setting will be activated.
6
VCR Functions
NB552
Recording
.@/:
“General Setting” menu will appear.
Basic Setup
SOURCE TIMER SET DISPLAY OPEN/CLOSE
1
2
3
4
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Connections
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
all timer recordings and at the end of the disc space.
Press [SETUP] to exit.
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 37
37
2007/09/04 17:05:53
DUBBING MODE
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the
DVD or the cassette tape is not copy protected.
Before starting this function, prepare for the recording on the
DVD+RW/+R, DVD-RW/-R or the cassette tape. Refer to pages
22 and 77.
Make sure:
• Insert a recordable disc and a cassette tape with a eraseprotection tab.
Note for recording to a cassette tape:
• The cassette tape's erase-protection tab is intact.
• The remaining time of the cassette tape is long enough.
Note for recording to a disc:
• Make sure that the disc is recordable. Refer to page 21.
1
2
3
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
Use [K / L] to select “Dubbing
Mode”, then press [OK].
Selection menu will appear.
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
SETUP
DISC MENU
o
OK
s
B
TITLE
RETURN
p
B
j
F
h
i
g
C
TRACKING
--
+
VCR
REC
DVD
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
Note for VCR to DVD duplication
• After starting VCR to DVD duplication, the picture
may be distorted because of the auto tracking
function.
This is not a malfunction. Be advised to playback the
cassette tape until the picture is stabilized, then set
the starting point which you wish to start recording,
and start VCR to DVD duplication.
38
EN
E9E2ZUD_BZV420MW8.indd 38
2007/09/04 17:05:54
VCR to DVD
General Setting
Playback
Display
Video
Recording
Clock
Reset All
4
Auto Chapter
Auto Finalize
Dubbing Mode
Dubbing Mode
Make Recording Compatible
VCR
DVD
DVD
VCR
Press [SETUP] to exit.
Press [VCR].
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
Press [DVD].
Make sure to select a recording mode using
[REC MODE].
Press [STOP C] to stop the recording.
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Auto Chapter
Auto Finalize
Dubbing Mode
Dubbing Mode
Make Recording Compatible
VCR
DVD
DVD
VCR
Press [SETUP] to exit.
Press [DVD].
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
Press [VCR].
Make sure to select a recording mode using
[REC MODE].
Press [D.DUBBING].
DVD to VCR duplication will start.
Press [STOP C] to stop the recording.
Function Setup
Title list will automatically appear.
• If you want to watch the duplicated material
after the VCR to DVD duplication, press [OK]
and then select “Play” in the title.
VCR Functions
Note
Español
EN
Others
• When you turn off the unit after setting the dubbing mode to DVD VCR, the setting will be set to VCR DVD
automatically.
• You cannot change the output mode during VCR to DVD or DVD to VCR duplication.
For Audio CD to VCR duplication:
• This function is available on Audio CD, not MP3 files.
For VCR to DVD duplication:
• The playback sound mode is followed by the setting of VCR playback sound mode on page 79. Set the playback
sound mode to which you wish to record to the DVD.
• This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR
to DVD duplication.
E9E2ZUD_BZV420MW8.indd 39
Editing
Press [D.DUBBING].
VCR to DVD duplication will start.
VCR”,
Playback
• Since it takes about a few seconds before the
actual dubbing begins, please allow extra 5
seconds when selecting the starting point.
5
6
7
8
9
Use [K / L] to select “DVD
then press [OK].
Recording
7
8
9
DVD”,
Basic Setup
5
6
DVD to VCR
Connections
4
Use [K / L] to select “VCR
then press [OK].
Introduction
DUBBING MODE
39
2007/09/04 17:05:56
INFORMATION ON PLAYBACK
Before you play back DVD, read the following information.
Playable Discs and Files
This unit is compatible to play back the following discs.
To play back a DVD, make sure that it meets the requirements
for region codes and color systems as described below. You
can play back discs that have the following logos will play back
on the unit. Other disc types are not guaranteed to play back.
Playable discs
Logos
Color Systems
DVD is recorded in different color systems throughout the
world. The most common color system is NTSC (which is
used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be recorded
in the NTSC system. You cannot play back DVD recorded in
other color systems.
Region Codes
This unit has been designed to play back DVD with
region 1. DVD must be labeled for ALL regions or
for region 1 in order to play back on the unit. You
cannot play back DVD that are labeled for other
regions. Look for the symbols on the right on your
DVD. If these region symbols do not appear on your
DVD, you cannot play back the DVD in this unit.
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only play back on the
unit with the same region code.
DVD-video
DVD+RW
DVD+R
DVD-RW
(Finalized video mode discs only)
PBC (playback control) for Video CD
You can select images or information on the menu screen by
activating the PBC (playback control) function of the video CD.
This unit conforms to ver.1.1 and ver. 2.0 of video CD
standard with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback
picture as well as music CD.
Ver.2.0 (with PBC function): While using a video CD with PBC
function, “PBC” appears on the TV screen.
DVD-R
(Finalized video mode discs only)
CD-DA (audio CD)
Note
• PBC setting turns to “ON” when loading video CD with
PBC function, thus, even after setting PBC to “OFF” and
ejecting the video CD then reloading the video CD, this
setting turns to “ON” automatically.
• Some operations cannot be performed while PBC function
is on. Cancel PBC function temporarily to perform those
operations by following the instruction below.
video CD
CD-RW
Media
1) Press [SETUP].
2) Use [K / L] to select “CD Playback Mode”, then press [OK].
“CD Playback Mode” menu will appear.
3) Use [K / L] to select “PBC (Video CD only)”, then press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Your setting will be activated.
CD-RW/-R
You can play back interactive software using menu screens.
Refer to instructions in the video CD.
CD-R
Playable files
CD-DA
MP3
is a trademark of DVD Format/Logo Licensing Corporation.
Hint for DVD Playback
The contents of DVD are generally divided into titles. Titles
may be further subdivided into chapters.
Unplayable Discs
The following discs will not play back on this unit.
• CD-ROM
• Compact Disc-Interactive (CD-I)
• DVD-RAM
• Video Single Disc (VSD)
• DVD-ROM
• DVD-audio
• Unfinalized disc
• DVD contains MP3 and DVD or CD contains Windows
Media™ Audio/JPEG files
• DVD-R or DVD-RW recorded in VR mode or non compatible
recording format
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD layer
cannot be heard.
40
DVD-video
title 1
chapter 1 chapter 2
track 1
chapter 1
title 2
chapter 2
audio CD, video CD
track 2
track 3
track 4
chapter 3
track 5
MP3
folder 1
file 1
file 2
file 3
folder 2
file 4
file 5
EN
E9E2ZUD_BZV420MW8.indd 40
2007/09/04 17:05:56
Introduction
BASIC PLAYBACK
Direct Playback
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
Press [DVD].
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
Basic Setup
1
GHI
1
2
Turn on the TV and be sure to select the input to
which the unit is connected.
Connections
STANDBY-ON
Press [STANDBY-ON y].
0
SETUP
Align the disc to
the disc tray guide.
o
OK
s
B
TITLE
* Make sure the disc is compatible with this unit.
(Refer to page 40 for the list of compatible discs.)
RETURN
p
F
h
i
C
g
TRACKING
--
+
DVD
VCR
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
It may take a while to load
the disc completely.
Press [PLAY B] to start playback.
If you are playing back a DVD-video or video CD
with PBC function, a menu may appear.
Refer to “Using the Title / Disc Menu” on page
45.
• Refer to “Resume Playback” on page 46.
NB552
Function Setup
Press [STOP C] once to stop playback
temporarily.
Editing
REC
3
4
5
Press [OPEN/CLOSE A] to close the
disc tray.
Playback
B
j
Recording
DISC MENU
VCR Functions
Others
Note
Español
• Some discs may start playback automatically.
• You can select images or information on the menu
screen by activating PBC (playback control) function
(page 40).
EN
E9E2ZUD_BZV420MW8.indd 41
41
2007/09/05 16:48:57
BASIC PLAYBACK
Playback from the Title List
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
1
2
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
Press [DVD].
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
0
DISC MENU
SETUP
o
OK
s
Align the disc to
the disc tray guide.
B
TITLE
RETURN
* Make sure the disc is compatible with this unit.
(Refer to page 40 for the list of compatible discs.)
p
B
j
F
h
i
C
g
TRACKING
--
+
VCR
REC
DVD
REC MODE D.DUBBING AUDIO
I
3
Press [OPEN/CLOSE A] to close the
disc tray.
It may take a while to load
the disc completely.
• To exit the title list, press [STOP C].
• To resume the title list, press [TITLE].
CM SKIP SEARCH RAPID PLAY
NB552
Note
• Some discs may start playback automatically.
• You can also start playback by pressing [PLAY B]
instead of [OK] at step 4.
42
EN
E9E2ZUD_BZV420MW8.indd 42
2007/09/04 17:06:00
1
SP (2Hr)
5
NOV/21/07 11:00AM E1 SP
NOV/21/07 0:20:44
Use [K / L] to select “Play”, then
press [OK].
Play
Edit
Overwrite
1
SP (2Hr)
NOV/21/07 11:00AM E1 SP
NOV/21/07 0:20:44
2
2
NOV/22/07 11:35AM E1 EP
NOV/22/07 0:10:33
NOV/22/07 11:35AM E1 EP
NOV/22/07 0:10:33
3
3
EMPTY TITLE
1:37:52 SP(2Hr)
EMPTY TITLE
1:37:52 SP(2Hr)
6
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 46.
To eject the disc, press [OPEN/CLOSE A] to
open the disc tray, then remove the disc before
turning off the unit.
Playback
No Disc Name
Disc
Recording
If you want to see disc information, press [{ ] when the
first page of the title list is displayed or press [ K ] when
the first title is selected but not when “Play”, “Edit” or
“Overwrite” is highlighted.
e.g.) DVD+RW
Playback will start.
Basic Setup
• For Video CD, when “PBC (Video CD only)” in
“CD playback Mode” menu is set to “ON”, the
video CD main menu will appear when
inserting a disc. In such case, select a numbered
menu with [the Number buttons].
• Press [B] to display the next page, and press
[{] to display the previous page.
Connections
4
Use [K / L] to select a desired title,
then press [OK].
Introduction
BASIC PLAYBACK
DVD+RW
Total Titles
3
Disc Space Used
0:30:48
Disc Protect
OFF
Make Edits Compatible
Needed
Editing
e.g.) DVD+R
Function Setup
No Disc Name
Disc
DVD+R
Total Titles
5
Disc Space Used
1:30:48
Disc Protect
OFF
Finalize
Finalized
VCR Functions
1. Disc name
(Default “No Disc Name”)
2. Disc type
(DVD+RW/DVD+R/ DVD-RW/DVD-R)
3. Total number of title
(include “EMPTY TITLE”)
4. Total time of recorded disc space
5. Status of disc protection
(“ON” is protected disc.)
6. Making edits compatible/finalize
• When DVD+RW is inserted:
If the disc needs to be set “Make Edits Compatible”,
“Needed” is displayed. Otherwise, “Not Needed” is
displayed. (Refer to page 67.)
• When DVD+R, DVD-RW or DVD-R is inserted:
If “Finalize” is done, “Finalized” is displayed.
Otherwise, “Unfinalized” is displayed.
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 43
43
2007/09/04 17:06:01
BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW/-R with MP3 Files
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
1
2
It may take a while to load
the disc completely.
SETUP
o
OK
s
B
TITLE
RETURN
p
B
j
F
Press [OPEN/CLOSE A] to close the
disc tray.
When an audio CD is inserted, track list will
appear.
When a CD-RW/-R with MP3 files is inserted, file
list will appear.
• To exit the track/file list, press [STOP C].
• To resume the track/file list, press [TITLE].
0
DISC MENU
Follow steps 1 to 2 in “Direct
Playback” on page 41.
h
i
C
g
TRACKING
--
+
VCR
DVD
3
Use [K / L] to select a desired folder
or track/file, then press [OK].
e.g.) File list
File List
DISC NAME
A
B
C
D
1
2
3
4
MP3
MP3
MP3
MP3
file1
file2
file3
file4
1/ 2
REC
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
NB552
Note
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
• Files whose extension is other than “.mp3(MP3)” will
not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
44
When selecting track/file:
Playback will start.
When selecting the folder (Not available for audio CD):
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [OK].
• Press [PLAY B], [OK] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN] to move back to the previous
hierarchy.
Hints for audio CD tracks and MP3 files:
.
• Folders are shown by
.
• Audio CD tracks are shown by
• MP3 files are shown by 3 .
• The system can recognize up to 255 folders, up to 99
tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “...”. Unrecognizable characters will
be replaced with asterisks.
• If there are no files in the folder, “No Files” will be displayed.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
<MP3>
• Sampling frequency
: 44.1 kHz or 48 kHz.
• Constant bit rate
: 112 kbps - 320 kbps
EN
E9E2ZUD_BZV420MW8.indd 44
2007/09/04 17:06:02
Using the Title / Disc Menu
Pause
Press [DVD] first.
1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
3) Press [STOP C] to exit.
Basic Setup
2) Use [K / L / { / B] to make a selection, and then
press [OK] to enable your selection.
Connections
DVD or video CD with PBC function may contain a title
list, which describes the contents of the disc, or a disc
menu, which guides you through the available functions
in the disc.
Press [DVD] first.
1) Press [TITLE] or [DISC MENU] to call up the title list
or disc menu.
Introduction
BASIC PLAYBACK
F
2) Press [PLAY B] to return to the normal playback.
• On DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 72.)
Playback
Note
• You can select a numbered menu with [the Number
buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• [TITLE] or [DISC MENU] will not always be active
with all DVD.
• For video CD, when “PBC (Video CD only)” in “CD
Playback Mode” menu is “ON”, the video CD main
menu will appear when inserting a disc.
Recording
Note
Editing
Function Setup
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 45
45
2007/09/04 17:06:04
SPECIAL PLAYBACK
Resume Playback
You can play back from where you stopped playing back
the disc last.
Press [DVD] first.
1) During playback, press [STOP C].
The resume message will appear.
Resume ON
2) Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn off the unit.
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
Skipping TV Commercials During
Playback
You can skip TV commercials to enjoy the recorded
programs without interrupting.
Press [DVD] first.
During playback, press [CM SKIP].
Normal playback will start at 30 seconds ahead from the
point you press [CM SKIP].
Every time you press [CM SKIP], the searching point will
be extended by 30 seconds ahead.
You can press [CM SKIP] up to 6 times (180 seconds).
e.g.) Press [CM SKIP] once.
Note
• For MP3 files, playback will resume from the
beginning of the file at which playback was stopped.
• Some video CD with the PBC function resume
playback from the beginning of the track.
CM Skip 30 sec.
(forwarding 30 seconds)
Fast Forward / Fast Reverse Playback
Press [DVD] first.
1) During playback, press [D] or [E].
Every time you press [D] or [E], approximate speed
will be changed as follows.
Fast forward or fast reverse playback across titles (for
DVD) or files (for MP3 files) is not possible.
40x
g
h
20x
g
h
5x
g
h
normal
speed
playback
g
h
2x
g
h
20x
g
h
B
Playback will return to the normal playback.
40x
For video CD, approximate forward/reverse speeds are
2x, 8x, 16x.
For audio CD, MP3 files, approximate speed is fixed at
/
).
8x with sound (indicated with
2) Press [PLAY B] to return to the normal playback.
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:
46
EN
E9E2ZUD_BZV420MW8.indd 46
2007/09/04 17:06:06
Rapid Playback
B
:
B:
Press [RAPID PLAY] 3 times to play back in
normal speed.
No effects.
2) Press [PLAY B] to continue the normal playback.
g
1/8x
h
g
1/16x
g
pause
h
h
g
1/16x
h
g
1/8x
h
1/3x
To return to the normal playback, press [PLAY B].
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
1/16x:
1/8x:
1/3x:
reverse (approx. speed)
1/16x:
1/8x:
1/4x:
• Only slow forward is available when playing back
video CD.
Editing
• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is PCM during rapid playback mode except
when using digital audio connection.
• When using digital audio connection (COAXIAL), the
LPCM sound (2 channel) will be output.
h
Playback
Note
g
1/4x
Recording
: Press [RAPID PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
Press [DVD] first.
1) During playback, press [PAUSE F]. Then press
[ D] or [E].
Every time you press [D] or [E], approximate speed
will be changed as follows. (The sound will remain
muted.)
Basic Setup
B
Press [RAPID PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
Slow Forward / Slow Reverse Playback
Connections
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound quality just as
normal playback.
Press [DVD] first.
1) During playback, press [RAPID PLAY].
Introduction
SPECIAL PLAYBACK
Step by Step Playback
Function Setup
VCR Functions
Press [DVD] first.
1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2) Press [NEXT G] repeatedly.
Playback will advance one frame (or step) at a time
when you press [NEXT G] with the sound muted.
To play back step by step backward:
Press [PREV H] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [PREV H] / [NEXT G] to reverse/
advance continuously.
3) Press [PLAY B] to continue the normal playback.
Others
Note
• Only step by step forward playback is available for
playing back video CD.
Español
EN
E9E2ZUD_BZV420MW8.indd 47
47
2007/09/04 17:06:08
SPECIAL PLAYBACK
Marker Setting
Zoom
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
e.g.) DVD-video
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
This feature allows you to assign a specific point on a disc
to be called back later.
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the marker
list.
e.g.) DVD-video
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select a desired zoom factor to zoom,
then press [OK].
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
× 1.2
× 1.5
× 2.0
3) Use [K / L] to select a desired marker number.
When it reaches the desired point, press [OK].
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
1
2
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
Zoom area will be displayed.
4) Use [K / L / { / B] to select a desired zoom
position, then press [OK].
3
4
5
6
-------------
The title (track) number and the time will be displayed.
4) To return to the marker later:
Use [K / L] to select the desired marker number,
then press [OK].
Note
Zoom playback will start.
Note
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [DISPLAY] again at
step 1.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [OK].
48
• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
– Turning off the power
– Record on a recordable disc
• You can mark up to 6 points.
• Marker setting is not available when you play back
the video CD with PBC function.
EN
E9E2ZUD_BZV420MW8.indd 48
2007/09/04 17:06:11
Title / Chapter Search
Introduction
SEARCH
Track Search
Press [DVD] first.
1) During playback, press [NEXT G] to skip the
current title or chapter and move to the next.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will
be skipped.
Press [DVD] first.
1) During playback, press [NEXT G] to skip the
current track/file and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [PREV H].
Press it repeatedly to go to the previous track/file. The
track/file will move backward one at a time.
To go back to the beginning of the current title or
chapter, press [PREV H].
Press it repeatedly to go to the previous title or
chapter. The title or chapter will move backward one
at a time.
Using [DISPLAY]
Recording
Press [DVD] first.
1) During playback, press [DISPLAY].
Using [DISPLAY]
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
e.g.) audio CD
1/ 5
2) Use [{ / B] to select
e.g.) DVD-video
, then press [OK].
0:00:15 / 0:05:00
, then press [OK].
1/ 5
0:01:00 / 1:23:45
DVD Video
CD
Playback
1/ 5
Basic Setup
Using [PREV H] / [NEXT G]
Connections
Using [PREV H] / [NEXT G]
e.g.) MP3 files
1/ 5
0:00:15
MP3
The number next to
will be highlighted.
will be highlighted.
3) Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[OK].
After the search, playback will start automatically.
Note
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
1/ 5
1/ 5
VCR Functions
• During CD playback you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
• Track search is not available when you play back the
video CD with PBC function.
Function Setup
Note
The number next to
Editing
3) Title:
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [OK].
Title search will start.
Chapter:
for
Press [B] to move to the number next to
chapter.
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press [OK].
After the search, playback will start automatically.
0:01:00 / 1:23:45
DVD Video
Others
total number
total time
of titles
of the title
total number
of chapters
Español
EN
E9E2ZUD_BZV420MW8.indd 49
49
2007/09/04 17:06:13
SEARCH
Time Search
Press [DVD] first.
1) During playback, press [DISPLAY].
, then press [OK].
2) Use [{ / B] to select
e.g.) DVD-video
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
e.g.) audio CD
1/ 5
0:00:15 / 0:05:00
CD
The number next to
will be highlighted.
To move to the number next to
, press [B].
When time search is not available,
counter are not displayed.
and time
3) Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [OK].
After the search, playback will start automatically.
Note
• Time search is available only in the same track, file or
title.
• Time search is not available when you play back the
video CD with PBC function.
50
EN
E9E2ZUD_BZV420MW8.indd 50
2007/09/04 17:06:15
Repeat Playback
Note
, then press [OK] within 1
2) Use [{ / B] to select
second or wait for 1 second to display the selection
menu.
1/ 5
1/ 5
0:01:00 / 1:23:45
• Point B for the repeat A-B playback should be set
within the same title or track as point A.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
• You cannot select “Group” during the random
playback of MP3 files.
• Repeat playback is not available when you play back
the video CD with PBC function.
Basic Setup
DVD Video
Random Playback
3) Use [K / L] to select a desired option to repeat,
then press [OK].
e.g.) DVD-video
1/ 5
1/ 5
0:01:00 / 1:23:45
1) Press [SETUP].
0:00:15 / 0:05:00
CD
OFF
Track
All
A–B
e.g.) MP3 files
Playback
2) Use [K / L] to select “CD Playback Mode”, then press
[OK].
“CD Playback Mode” menu will appear.
3) Use [K / L] to select “Random Play”, then press
[OK].
Random playback will start.
e.g.) audio CD, video CD
1/ 5
You can play back a disc randomly instead of playing
back in the original order.
Press [DVD] first.
Recording
DVD Video
OFF
Title
Chapter
A–B
Connections
Available repeat function may vary depending the discs.
Press [DVD] first.
1) During playback press [DISPLAY].
Introduction
REPEAT / RANDOM / PROGRAM PLAYBACK
Note
1/ 5
0:00:15
MP3
Track
All
Group
The selected repeat playback will start.
1/ 5
1/ 5
Editing
OFF
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the TV
screen.
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
random playback.
0:01:00 / 1:23:45
Function Setup
DVD
Repeat
Title
VCR Functions
Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [OK].
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 51
51
2007/09/04 17:06:16
REPEAT / RANDOM / PROGRAM PLAYBACK
Program Playback
You can program the disc to play back in your desired
order.
Press [DVD] first.
1) Press [SETUP].
2) Use [K / L] to select “CD Playback Mode”, then press
[OK].
“CD Playback Mode” menu will appear.
3) Use [K / L] to select “Program Play”, then press
[OK].
4) Use [K / L] to select a desired track, then press [OK]
or [B].
CD Playback Mode
Program Play
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total
0:00:00
Repeat this step until you program all the desired
tracks.
5) Press [PLAY B].
CD Playback Mode
Program Play
09
04
10
06
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total
0:31:07
Program playback will start.
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• You may also select a desired track using [the
Number buttons] at step 4.
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
program playback.
52
EN
E9E2ZUD_BZV420MW8.indd 52
2007/09/04 17:06:17
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
1/ 5
1/ 5
2) Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
0:01:00 / 1:23:45
DVD Video
1/ 5
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
DVD Video
Subtitle will be displayed in the selected language.
When selecting “OFF”, subtitle will disappear.
• Some discs will only allow you to change the subtitle
from the disc menu. Press [TITLE] or [DISC MENU] to
display the disc menu.
• If a 4-digit language code appears in the subtitle
menu, refer to the “LANGUAGE CODE” on page 85.
1/ 5
0:00:15 / 0:05:00
CD
Editing
Note
• If the title contains both main and sub audio, you can
further select “L” (main), “R” (sub), or “L/R” (mixed of
main and sub).
For audio CD, video CD
• Audio channel will switch.
e.g.) audio CD
Playback
1.Dolby Digital 5.1ch English
2.Dolby Digital 2ch English
0:01:00 / 1:23:45
OFF
1.English
Recording
3) Use [K / L] to select a desired audio soundtrack or
audio channel, then press [OK].
For DVD-video
• Audio soundtrack will switch.
3) Use [K / L] to select a desired subtitle language,
then press [OK].
1/ 5
Basic Setup
2) Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back video CD, audio CD you can switch
“L/R”(stereo), “L”(left) or “R”(right).
Press [DVD] first.
1) During playback, press [DISPLAY].
Connections
DVD-video may have subtitles in 1 or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during
playback.
Press [DVD] first.
1) During playback, press [DISPLAY].
Introduction
SELECTING THE FORMAT OF AUDIO AND VIDEO
1. L/R
2. L
3. R
Function Setup
Note
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [TITLE] or
[DISC MENU] to display the disc menu.
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 53
53
2007/09/04 17:06:18
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Virtual Surround System
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
2) Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
e.g.) DVD-video
1/ 5
Some DVD-video have scenes shot from 2 or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
Press [DVD] first.
1) During playback, press [DISPLAY].
Press [DVD] first.
1) During playback, press [DISPLAY].
1/ 5
Switching Camera Angles
2) Use [{ / B] to select
e.g.) DVD-video
1/ 5
, then press [OK].
1/ 5
0:01:00 / 1:23:45
DVD Video
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select “OFF”, “Type 1” or “Type 2”,
then press [OK].
e.g.) DVD-video
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
OFF
: no effect
Type 1 : natural effect
Type 2 : emphasized effect
Angle icon appears when a switching camera angle is
available.
Angle will switch each time you press [OK].
Note
• Angle icon does not appear on the TV screen in a
case you set “Angle Icon” to “OFF” in “Playback”
menu. Refer to page 72.
Reducing Block Noise
Note
• Select “OFF” in a case sound is distorted.
• The setting will be kept even when the unit is turned
off.
Press [DVD] first.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
e.g.) DVD-video
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select a desired option, then press
[OK].
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Your setting will be activated.
This function reduces noise in the playback picture. If
noises appear on the TV screen during playing back
discs recorded in long time recording mode such as EP
or SLP, select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a few noises such as
DVD-video, select “OFF”.
54
EN
E9E2ZUD_BZV420MW8.indd 54
2007/09/04 17:06:19
Guide to a Title List
Editing Discs
Press [TITLE].
2
3
4
1
SP (2Hr)
NOV/21/07 11:00AM E1 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM E1 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
Note
Edit
Title Delete
2
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
0:00:59
11 10
9
8
7
Editing
1. Title list: List of the titles recorded on the disc, and
their information.
2. Arrow: Indicating there is a previous / next page.
3. Title information: On the first line, title name
(editable) is displayed. On the second line, the length
of the title is displayed.
Empty title: The portion of the disc where there is no
recordings are made. As for the empty title, available
recording time by the selected recording mode is
displayed on the second line.
4. Recording mode: Currently selected recording mode
is displayed here.
5. Capacity indicator: Indicating the position and the
amount of each title in the disc. The portion for the
selected title is highlighted.
6. Thumbnails: A cut from the recorded content is
displayed here.
7. Submenu: Submenus for the selected menu are
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time, selected external input
position, and the recording mode are displayed here.
9. Progress bar: Indicating the progress of the
playback.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.
Function Setup
VCR Functions
Others
Español
Press [STOP C] to exit the title list.
EN
E9E2ZUD_BZV420MW8.indd 55
Playback
NOV/22/07 11:35AM E1 EP
• When selecting “Edit” on pop-up menu of the title
list and edit the title, the title list is displayed after
writing the edited contents onto the disc.
• The capacity indicator in the right side of the title list
may not indicate the precise capacity in the disc.
• The capacity indicator may not indicate the capacity
for the titles of which recording time is short.
• Once you have finalized a DVD+R/DVD-R, you cannot
edit or record anything on that disc.
Recording
5
2
6
Basic Setup
Play
Edit
Overwrite
You can edit discs for the following items. Be sure that
once you edit titles, they will not remain as original.
• Deleting Titles (Refer to page 56.)
• Putting Names on Titles (Refer to page 57.)
• Setting Chapter Marks (Refer to page 58.)
• Clearing Chapter Marks (Refer to pages 59-60.)
• Hiding Chapters (Refer to page 61.)
• Setting Pictures for Thumbnails (Refer to page 62.)
• Dividing a Title (DVD+RW/DVD-RW only)
(Refer to page 63.)
• Putting Name on Disc (Refer to page 64.)
• Setting or Releasing Disc Protect (Refer to page 65.)
• Erasing Disc (Refer to page 66.)
• Making Edits Compatible (Refer to page 67.)
Connections
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
1
Introduction
INFORMATION ON DISC EDITING
55
2007/09/04 17:06:21
EDITING DISCS
Deleting Titles
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
For DVD+RW/DVD-RW, when the last recorded title in the
title list is deleted, the available disc space to record on
will be increased. For DVD+R/DVD-R, the disc space to
record on will not be changed.
3
Use [K / L] to select “Edit”, then
press [OK].
Play
Edit
Overwrite
SP (2Hr)
1
NOV/21/07 11:00AM E1 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM E1 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
4
Use [K / L] to select “Title Delete”,
then press [OK].
Edit
1
Title Delete
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
0
Title Dividing
DISC MENU
SETUP
NOV/21/07 11:00AM E1 SP
o
0:00:59
OK
s
B
TITLE
RETURN
p
B
j
F
h
i
g
5
Use [K / L] to select “Yes”, then press
[OK].
Edit - Title Delete
C
1
Yes
No
1
2
NOV/21/07 11:00AM E1 SP
Press [DVD] first.
Press [TITLE].
0:00:59
Use [K / L] to select a desired title,
then press [OK].
After that, “Are you sure?” will appear, select
“Yes” and then press [OK].
Title will be deleted.
Data will be written onto the disc momentarily.
Writing to Disc
1
90%
SP (2Hr)
NOV/21/07 11:00AM E1 SP
NOV/21/07 0:20:44
2
This operation may take a
while to be completed.
NOV/22/07 11:35AM E1 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
After editing is complete, the title list will appear.
e.g.) DVD+RW/DVD-RW
1
SP (2Hr)
EMPTY TITLE
0:21:14 SP(2Hr)
2
Note
• Deleted part of the titles in the capacity indicator
changes in color.
• As for DVD+RW/DVD-RW if you delete the title, deleted
title will be displayed as “EMPTY TITLE”.
56
NOV/22/07 11:35AM E1 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
EN
E9E2ZUD_BZV420MW8.indd 56
2007/09/04 17:06:22
Introduction
EDITING DISCS
Putting Names on Titles
You can put title names on the titles and change the
names from this menu.
4
Edit - Edit Title Name
1
Yes
No
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
MY FAVORITE
0:00:59
The name you entered will be activated for the title.
0
5
SETUP
o
OK
s
B
TITLE
After this operation is completed,
press [RETURN] to exit.
Data will be written onto the disc momentarily.
RETURN
This operation may take a
while to be completed.
Recording
DISC MENU
Basic Setup
.@/:
Connections
STANDBY-ON
Use [K / L] to select “Yes”, then press
[OK].
p
B
j
g
Guide to Edit Title Name
C
Follow steps 1 to 3 in “Deleting
Titles” on page 56 to display “Edit”
menu.
Use [K / L] to select “Edit Title
Name”, then press [OK].
1
Title Delete
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
NOV/21/07 11:00AM E1 SP
3
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on this page.
Edit - Edit Title Name
A B C
a b c
character set
1 2 3
@ !
?
M
0:00:59
When you finish entering a title name, press [OK].
123
@!?
0
<space>
<space>
0
<space>
1
(*1)
(*1)
1
! ”# $ % & ’( )
*+,-./:;<=>
?@[]^_{|}
2
ABC
abc
2
(*2)
3
DEF
def
3
(*2)
4
GHI
ghi
4
(*2)
5
JKL
jkl
5
(*2)
6
MNO
mno
6
(*2)
7
PQRS
pqrs
7
(*2)
8
TUV
tuv
8
(*2)
9
WXYZ
wxyz
9
(*2)
*1 Press 1 , character set will be changed to the “ @!? ”
mode automatically.
*2 Press 2 to 9 , character set will be changed to the
previous input mode automatically.
• To delete letters, press [CLEAR] repeatedly.
Holding [CLEAR] to delete all letters.
• Use [s / B] to move the cursor to the left and right.
• You can enter up to 30 letters.
Note
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.
EN
E9E2ZUD_BZV420MW8.indd 57
Español
area for entering title names
abc
Others
1
ABC
VCR Functions
0:00:59
Select
Press
Function Setup
Edit
1) Use [K / L] to select a desired character set, then
press [OK].
2) Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
Editing
1
2
h
Playback
F
i
57
2007/09/04 17:06:23
EDITING DISCS
Setting Chapter Marks
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
1
2
3
Follow steps 1 to 3 in “Deleting
Titles” on page 56 to display “Edit”
menu.
4
Use [K / L] to select “Add”, then press
[OK].
0
DISC MENU
SETUP
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Press [PLAY B] and then [PAUSE F]
to decide the point at which you will
create a new chapter mark.
• It is convenient to use [PREV H], [NEXT G],
[E] and [D] for finding the point to add a
new chapter mark.
o
OK
s
B
TITLE
RETURN
p
B
j
Edit - Chapter Mark
1
i
Add
Delete
Delete All
F
h
g
Chapter
C
2/ 2
TRACKING
--
+
NOV/21/07 11:00AM E1 SP
VCR
REC
DVD
0:00:59
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
5
Use [K / L] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Add
1
Yes
No
Chapter
2/ 2
F
NOV/21/07 11:00AM E1 SP
NB552
0:00:59
A new chapter mark will be added.
6
Note
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
• When the number of chapter marks in a title is 99
and the number of chapter marks in a disc is 254,
chapter marks cannot be added.
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
58
EN
E9E2ZUD_BZV420MW8.indd 58
2007/09/04 17:06:25
Introduction
EDITING DISCS
Clearing Chapter Marks
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
5
6
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
DISC MENU
SETUP
o
B
RETURN
p
B
j
F
h
i
g
C
Submenu will appear.
Use [PREV H] / [NEXT G] to select
a chapter mark to be deleted.
Use [K / L] to select “Delete”, then
press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Delete
Playback
1
TRACKING
--
Yes
No
+
Chapter
VCR
Recording
OK
s
TITLE
Use [K / L] to select “Chapter Mark”,
then press [OK].
Basic Setup
4
PQRS
1
2
3
4
5
Connections
STANDBY-ON
Follow steps 1 to 3 in “Deleting
Titles” on page 56 to display “Edit”
menu.
2/ 2
DVD
F
REC
REC MODE D.DUBBING AUDIO
NOV/21/07 11:00AM E1 SP
I
0:00:59
CM SKIP SEARCH RAPID PLAY
Editing
The selected chapter mark will be deleted.
This operation may take a
while to be completed.
Function Setup
6
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
NB552
VCR Functions
Others
Note
Español
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
EN
E9E2ZUD_BZV420MW8.indd 59
59
2007/09/04 17:06:26
EDITING DISCS
Clearing Chapter Marks (cont’d)
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
DISC MENU
SETUP
o
OK
s
B
TITLE
RETURN
p
B
j
F
h
i
g
C
To delete all chapter marks:
1
2
3
4
Follow steps 1 to 3 in “Deleting
Titles” on page 56 to display “Edit”
menu.
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Use [K / L] to select “Delete All”,
then press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Delete All
1
--
+
VCR
REC
Yes
No
TRACKING
Chapter
DVD
2/ 2
F
NOV/21/07 11:00AM E1 SP
REC MODE D.DUBBING AUDIO
0:00:59
I
CM SKIP SEARCH RAPID PLAY
5
Use [K / L] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Delete All
1
Are you sure?
Yes
No
Chapter
2/ 2
NB552
NOV/21/07 11:00AM E1 SP
0:00:59
All chapter marks will be deleted.
6
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
60
EN
E9E2ZUD_BZV420MW8.indd 60
2007/09/04 17:06:27
Introduction
EDITING DISCS
Hiding Chapters
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
SETUP
o
OK
s
Submenu will appear.
Use [PREV H] / [NEXT G] to decide
the chapter to be hidden.
Use [K / L] to select “Hidden”, then
press [OK].
Edit - Hide Chapter
B
TITLE
1
Chapter
p
B
h
2/ 2
Visible
i
g
Playback
F
Visible
Hidden
RETURN
j
Recording
DISC MENU
Use [K / L] to select “Hide Chapter”,
then press [OK].
NOV/21/07 11:00AM E1 SP
C
0:00:59
TRACKING
--
+
VCR
REC
DVD
REC MODE D.DUBBING AUDIO
CM SKIP SEARCH RAPID PLAY
5
After this operation is completed,
press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
Editing
I
This operation may take a
while to be completed.
VCR Functions
Note
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
Others
1
Function Setup
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible” at the step 4 on this
page.
Data will be written onto the disc momentarily.
After that, title list is displayed.
NB552
Hidden
Basic Setup
.@/:
1
2
3
4
Connections
STANDBY-ON
Follow steps 1 to 3 in “Deleting
Titles” on page 56 to display “Edit”
menu.
SP (2Hr)
NOV/21/07 11:00AM E1 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM E1 EP
NOV/22/07 0:10:33
3
Español
EMPTY TITLE
1:37:52 SP(2Hr)
EN
E9E2ZUD_BZV420MW8.indd 61
61
2007/09/04 17:06:28
EDITING DISCS
Setting Pictures for Thumbnails
You can set your desired scene as a thumbnail for each
title.
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
DISC MENU
SETUP
o
OK
s
B
TITLE
RETURN
1
2
3
4
Follow steps 1 to 3 in “Deleting
Titles” on page 56 to display “Edit”
menu.
Use [PREV H], [NEXT G], [E],
[D], [PAUSE F] and [PLAY B] to
decide the picture you want to select
as a thumbnail.
Use [K / L] to select “Index Picture”,
then press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit - Index Picture
1
p
Yes
No
B
j
F
h
i
g
F
C
NOV/21/07 11:00AM E1 SP
TRACKING
-VCR
REC
0:00:59
+
A picture for thumbnail will be set.
DVD
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
5
Press [RETURN] to exit.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
NB552
Note
• If the selected picture for a thumbnail is overwritten,
the index picture is reset to the first scene of the title.
62
EN
E9E2ZUD_BZV420MW8.indd 62
2007/09/04 17:06:29
Introduction
EDITING DISCS
Dividing a Title
You can divide one title into 2 new titles.
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
DISC MENU
SETUP
o
OK
s
Use [K / L] to select “Title Dividing”,
then press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit - Title Dividing
B
TITLE
1
Recording
0
Use [PREV H], [NEXT G], [E],
[D], [PAUSE F] and [PLAY B] to
decide the point at which you will
divide the title.
Basic Setup
.@/:
Connections
STANDBY-ON
1
2
3
4
Follow steps 1 to 3 in “Deleting
Titles” on page 56 to display “Edit”
menu.
Yes
No
RETURN
p
F
h
i
g
C
Playback
B
j
F
NOV/21/07 11:00AM E1 SP
0:00:59
TRACKING
--
+
VCR
REC MODE D.DUBBING AUDIO
Data will be written onto the disc momentarily.
I
CM SKIP SEARCH RAPID PLAY
This operation may take a
while to be completed.
Editing
REC
DVD
The title will be divided into 2 new titles.
Both title names are identical, and index pictures
are reset to the first scene at this point.
Function Setup
NB552
VCR Functions
Others
Note
Español
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
49, and the number of recording chapters reaches
the maximum of 254.
EN
E9E2ZUD_BZV420MW8.indd 63
63
2007/09/04 17:06:30
EDITING DISCS
Putting Name on Disc
You can put a name on the disc and change it from this
menu.
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
SETUP
DISC MENU
Press [STOP C] if you are playing back a disc.
1
2
3
Press [DVD] first.
Press [SETUP].
Use [K / L] to select “Disc Edit”, then
press [OK].
Use [K / L] to select “Edit Disc
Name”, then press [OK].
e.g.) DVD+RW
Disc Edit
o
OK
s
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
B
TITLE
RETURN
p
A window for entering a title name will appear.
B
j
F
h
i
Edit Disc Name
A B C
C
g
a b c
No Disc Name
1 2 3
TRACKING
--
+
VCR
REC
Disc
DVD+RW
Total Titles
3
Disc Space Used
0:30:48
Disc Protect
OFF
Make Edits Compatible
Needed
@ !
?
DVD
REC MODE D.DUBBING AUDIO
0:00:00
I
CM SKIP SEARCH RAPID PLAY
NB552
4
5
To enter a disc name, follow the steps
of “Guide to Edit Title Name” on page
57.
When you finish entering a title name, press
[OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit Disc Name
Yes
No
No Disc Name
Disc
DVD+RW
Total Titles
3
Disc Space Used
0:30:48
Disc Protect
OFF
Make Edits Compatible
Needed
MY FAVORITE DISC
0:00:00
The name you entered will be activated for the title.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• You cannot select “Disc Edit” when finalized DVD+R
or DVD-R is inserted.
64
EN
E9E2ZUD_BZV420MW8.indd 64
2007/09/04 17:06:31
Setting or Releasing Disc Protect
To prevent accidental editing, or erasing the titles, you
can protect them.
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
Use [K / L] to select “Disc Protect
OFF ON”, then press [OK].
e.g.) DVD+RW
Disc Edit
Basic Setup
.@/:
1
2
Connections
STANDBY-ON
Follow steps 1 to 2 in “Putting Name
on Disc” on page 64 to display “Disc
Edit” menu.
Introduction
EDITING DISCS
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
0
SETUP
o
OK
s
• If the disc is already protected, “Disc Protect ON
OFF” will appear instead of “Disc Protect OFF
ON”.
B
TITLE
RETURN
Recording
DISC MENU
p
B
j
h
g
C
TRACKING
--
+
VCR
DVD
3
Use [K / L] to select “Yes”, then press
[OK].
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Protect this disc?
Disc Protect OFF
ON
Playback
F
i
Yes
No
REC
REC MODE D.DUBBING AUDIO
Editing
I
CM SKIP SEARCH RAPID PLAY
Data will be written onto the disc momentarily.
Function Setup
This operation may take a
while to be completed.
NB552
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 65
65
2007/09/04 17:06:32
EDITING DISCS
Erasing Disc
Press [STOP C] if you are playing back a disc.
You can erase all titles on a disc.
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
1
2
Follow steps 1 to 2 in “Putting Name
on Disc” on page 64 to display “Disc
Edit” menu.
Use [K / L] to select “Erase Disc”,
then press [OK].
e.g.) DVD+RW
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
0
DISC MENU
SETUP
o
OK
s
B
TITLE
RETURN
p
B
j
F
h
i
C
g
TRACKING
--
+
VCR
DVD
3
Use [K / L] to select “Yes”, then press
[OK].
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
When you
Disc Protect OFF
ON press “Yes”, all the
contents in the disc will be erased.
Are you sure to erase the disc?
Yes
No
REC
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
NB552
Note
• When you select “Yes” at step 3, all contents of the
disc will be erased.
66
EN
E9E2ZUD_BZV420MW8.indd 66
2007/09/04 17:06:33
Introduction
EDITING DISCS
Making Edits Compatible
STANDBY-ON
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
4
5
6
PQRS
TUV
WXYZ
1
2
Follow steps 1 to 2 in “Putting Name
on Disc” on page 64 to display “Disc
Edit” menu.
3
Use [K / L] to select “Yes”, then press
[OK].
MNO
8
9
SPACE
CLEAR
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
Recording
7
TIMER
Use [K / L] to select “Make Edits
Compatible”, then press [OK].
Basic Setup
SOURCE TIMER SET DISPLAY OPEN/CLOSE
Press [STOP C] if you are playing back a disc.
0
DISC MENU
SETUP
o
OK
s
B
TITLE
RETURN
B
j
F
h
i
C
g
+
DVD
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
Data will be written onto the disc momentarily.
Function Setup
This operation may take a
while to be completed.
Editing
VCR
REC
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Activate
Make Edits Compatible?
Disc Protect
OFF theON
Yes
No
TRACKING
--
Playback
p
Connections
If you have added or deleted chapters, or made chapters
hidden, you must perform “Make Edits Compatible” to
see those effects on other unit.
VCR Functions
NB552
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 67
67
2007/09/04 17:06:34
LIST OF SETTINGS
The following table is the contents which you can set and the default setting. Refer to the following table for useful operation.
• Your change to each settings stays on even when the power is off.
• An item which is not currently available is grayed in the settings.
Setup
Items (highlight is the default)
Playback
Parental Lock
Pages 69-72
Disc Audio
Dynamic Range
Control
PCM
Dolby Digital
Disc Menu Language
Audio Language
General Setting
Subtitle Language
Angle Icon
Still Mode
Display
Page 73
OSD Language
Screen Saver
Video
Progressive Scan
Pages 74-75
TV Aspect
General Setting
Recording
Français
Español
OFF
5minutes
10minutes
15minutes
30miniutes
ON
OFF
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
E1(Rear)
Video Input
Video In
Page 13
S-Video In
E2(Front)
Video In
S-Video In
Auto Chapter
OFF
Page 22
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Auto Finalize
Disc Full
ON
OFF
Page 37
End of Timer Rec ON
OFF
Dubbing Mode
Pages 38-39
VCR DVD
DVD VCR
Make Recording Compatible
ON
OFF
Page 22
Clock Setting
Clock
Page 20
Reset All
Page 76
68
Contents
Set the parental level for DVD playback.
OFF
level 8 [Adult] to 1 [Kid Safe]
Compressing the range of sound volume.
ON
OFF
Set whether the sound recorded in 96kHz will
48kHz
be down sampled in 48kHz.
96kHz
PCM
Set the type of sound signal which outputs
from the digital audio output jack.
Stream
Set the language for disc menu language.
English
French
Spanish
Other
Set the language for audio.
Original
English
French
Spanish
Other
Set the language for subtitles.
OFF
English
French
Spanish
Other
Set whether or not to display the angle icon.
ON
OFF
Set the type of still image in pausing playback.
Auto
Field
Frame
Set the language for OSD (on-screen display).
English
Yes
No
Set the idling time before the screen saver
starts.
Set to the progressive scan mode (set to "ON")
or to the interlace scan mode(set to "OFF").
Set a picture size according to aspect ratio of
your TV.
Set the video input type for the external input.
Insert chapter marks at even time interval.
Set the unit to finalize the disc automatically.
Set the VCR to DVD (DVD to VCR) duplication.
Set to prohibiting additional recording (OFF)
or to replace the title list after recording (ON).
Set the clock.
Set to the default setting.
EN
E9E2ZUD_BZV420MW8.indd 68
2007/09/04 17:06:35
Introduction
SETUPS
Playback
Press [STOP C] if you are playing back a disc.
Connections
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
1
2
3
Use [K / L] to select a desired item,
then press [OK].
“General Setting” menu will appear.
Use [K / L] to select “Playback”, then
press [OK].
General Setting
SETUP
DISC MENU
o
OK
s
Recording
Playback
Display
Video
Recording
Clock
Reset All
B
TITLE
RETURN
p
B
j
F
h
i
C
g
+
REC
DVD
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
1
2
3
4
5
6
7
Playback
TRACKING
-VCR
Parental Lock
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Function Setup
4
5
Refer to 1 to 7 on pages 70-72 and
set the selected item.
Editing
Submenu will appear.
NB552
Basic Setup
.@/:
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
When you finish with setting, press
[SETUP] to exit.
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 69
69
2007/09/04 17:06:36
SETUPS
Playback (cont’d)
1
Parental Lock (Default: OFF)
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K / L] to select the desired level, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
A
Use [K / L] to select “Yes”. Use [the Number buttons]
to enter a new password except for 4737, then press
[OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Parental Lock
OFF Parental Lock
Audio Out
8 [Adult]
Disc Menu Language
7 [NC 17]
6 [R] Audio Language
Subtitle Language
5 [PG R]
Angle Icon
4 [PG 13]
3 [PG] Still Mode
2 [G]
1 [Kid Safe]
Note
• Parental lock function may not be available to some
discs.
• With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
• Record the password in case you forget it.
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
General Setting
Parental Lock
OFF Parental Lock
Audio Out
8 [Adult]
Change
Password?
Disc Menu Language
7 [NC 17]
Audio Language
6 [R] Yes
Subtitle Language
No
5 [PG R]
Angle Icon
4 [PG 13]
3 [PG] Still Mode
2 [G]
1 [Kid Safe]
Playback
Display
Video
Recording
Clock
Reset All
Yes
Parental Lock
OFF Parental Lock
Audio Out
8 [Adult]
Change
Password?
DiscInput
Menu Language
7Password
[NC 17]
Audio Language
6 [R] Yes
Subtitle Language
No
5 [PG R]
Angle Icon
4 [PG 13]
3 [PG] Still Mode
2 [G]
1 [Kid Safe]
Your setting will be activated.
B
If a password has not been set yet, proceed to A .
If a password has been set already, proceed to B .
A password has not been set yet.
A password has been set already.
• Use [the Number buttons] to enter the current
password.
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Parental Lock
OFF Parental Lock
Audio Out
8 [Adult]
Disc Menu Language
7 [NC 17]
Password Input
6 [R] Audio Language
Subtitle Language
5 [PG R]
Angle Icon
4 [PG 13]
3 [PG] Still Mode
2 [G]
1 [Kid Safe]
Your setting will be activated.
• If you want to change password, use [K / L] to select
“Yes”. Use [the Number buttons] to enter a new
password, then press [OK].
<change the password>
General Setting
Playback
Display
Video
Recording
Clock
Reset All
General Setting
Parental Lock
OFF Parental Lock
Audio Out
8 [Adult]
Change
Password?
Disc Menu Language
7 [NC 17]
Audio Language
6 [R] Yes
Subtitle Language
No
5 [PG R]
Angle Icon
4 [PG 13]
3 [PG] Still Mode
2 [G]
1 [Kid Safe]
Playback
Display
Video
Recording
Clock
Reset All
Yes
Parental Lock
OFF Parental Lock
Audio Out
8 [Adult]
Change
Password?
DiscInput
Menu Language
7Password
[NC 17]
Audio Language
6 [R] Yes
Subtitle Language
No
5 [PG R]
Angle Icon
4 [PG 13]
3 [PG] Still Mode
2 [G]
1 [Kid Safe]
Your setting will be activated.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4,7,3,7
using [the Number buttons] in password input
window. Password will be cleared and parental levels
will be set to “OFF”.
70
EN
E9E2ZUD_BZV420MW8.indd 70
2007/09/04 17:06:37
Introduction
SETUPS
Playback (cont’d)
2
C
Disc Audio
Use [K / L] to select a desired item, then press [OK].
General Setting
A
Parental Lock
A
B
C
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Parental Lock
Disc AudioAudio Out
Disc Menu Language
Dolby Digital
Dynamic Range
AudioControl
Language
PCM PCMSubtitle Language
DolbyStream
Digital
Angle Icon
Still Mode
Disc AudioAudio Out
Disc Menu Language
Dynamic Range
AudioControl
Language
PCM
Subtitle Language
Dolby Digital
Angle Icon
Still Mode
Dynamic Range Control (Default : ON)
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Parental Lock
Disc AudioAudio Out
Menu
Language
Dynamic Disc
Range
Control
Dynamic Range
AudioControl
Language
PCM ON Subtitle Language
DolbyOFF
Digital
Angle Icon
Still Mode
Recording
Set to “ON” to compress the range between soft and loud sounds.
Use [K / L] to select a setting, then press [OK].
Your setting will be activated.
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
Basic Setup
Playback
Display
Video
Recording
Clock
Reset All
Use [K / L] to select a setting, then press [OK].
Connections
Choose the appropriate audio setting for your external device.
It will only affect a disc playback.
Dolby Digital (Default : Stream)
Playback
Your setting will be activated.
Note
B
Editing
• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
PCM (Default : 48kHz)
Function Setup
Use [K / L] to select a setting, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Parental Lock
Disc AudioAudio Out
Disc Menu Language
PCM
Dynamic Range
AudioControl
Language
PCM 48kHz
Subtitle Language
Dolby96kHz
Digital
Angle Icon
Still Mode
VCR Functions
Others
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Note
When playing back disc with copyright protection
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
Español
EN
E9E2ZUD_BZV420MW8.indd 71
71
2007/09/04 17:06:38
SETUPS
Playback (cont’d)
3
Disc Menu Language (Default : English)
Set the language for disc menu.
Use [K / L] to select a setting, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Parental Lock
Out
Disc Menu Audio
Language
Disc Menu Language
EnglishAudio Language
FrenchSubtitle Language
Spanish
Angle Icon
Other Still Mode
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
• Press [CLEAR] or [s] to erase numbers entered
incorrectly.
6
Your setting will be activated.
4
Note
Audio Language (Default : Original)
Angle Icon (Default : ON)
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a setting, then press [OK].
Set the audio language.
Use [K / L] to select a setting, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Parental Lock
Audio Out
Audio Language
Disc Menu Language
Original
Audio Language
EnglishSubtitle Language
FrenchAngle Icon
Spanish
Still Mode
Other
Parental Lock
Disc Audio
Angle IconDisc Menu Language
Audio Language
ON Subtitle Language
OFF Angle Icon
Still Mode
Your setting will be activated.
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
5
7
Still Mode (Default : Auto)
Select “Auto” usually.
Use [K / L] to select a setting, then press [OK].
Subtitle Language (Default : OFF)
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Set the subtitle language.
Use [K / L] to select a setting, then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Parental Lock
Audio Out
Subtitle Language
Disc Menu Language
OFF Audio Language
EnglishSubtitle Language
FrenchAngle Icon
Spanish
Still Mode
Other
Your setting will be activated.
If “Other” is selected for 3 to
using [the Number buttons].
5 , press 4-digit code
Parental Lock
Still Mode Audio Out
Disc Menu Language
Auto Audio Language
Field Subtitle Language
Frame Angle Icon
Still Mode
Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
Field
: Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Note
• Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
Code Input
-
-
-
-
• When you finish entering the code, press [OK]. Refer
to the language code table on page 85.
72
EN
E9E2ZUD_BZV420MW8.indd 72
2007/09/04 17:06:39
Introduction
SETUPS
Display
Press [STOP C] if you are playing back a disc.
Connections
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
SETUP
DISC MENU
o
B
TITLE
RETURN
B
F
h
i
C
g
--
+
VCR
REC
DVD
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
1 OSD Language
2 Screen Saver
4
5
When you finish with setting, press
[SETUP] to exit.
OSD Language (Default : English)
Editing
1
Refer to 1 to 2 on this page and set
the selected item.
Playback
TRACKING
Use [K / L] to select a desired item,
then press [OK].
Selection menu will appear.
p
j
Use [K / L] to select “Display”, then
press [OK].
Recording
OK
s
1
2
3
Basic Setup
.@/:
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Set the language for the on-screen display.
Use [K / L] to select a setting, then press [OK].
General Setting
NB552
Function Setup
Playback
Display
Video
Recording
Clock
Reset All
OSD Language
Screen Saver
OSD Language
English
Français
Español
2
Screen Saver (Default : 10 minutes)
Set the time to activate the screen saver function on the
TV screen.
Use [K / L] to select a setting, then press [OK].
VCR Functions
Your setting will be activated.
General Setting
Others
Playback
Display
Video
Recording
Clock
Reset All
OSD Language
Screen Saver
Screen Saver
OFF
5 minutes
10 minutes
15 minutes
30 minutes
Español
Your setting will be activated.
EN
E9E2ZUD_BZV420MW8.indd 73
73
2007/10/18 15:20:48
SETUPS
Video
Press [STOP C] if you are playing back a disc.
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
SETUP
DISC MENU
o
OK
s
B
TITLE
1
2
3
RETURN
p
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Use [K / L] to select “Video”, then
press [OK].
Use [K / L] to select a desired item,
then press [OK].
1 Progressive Scan
2 TV Aspect
3 Video Input
Submenu will appear.
B
j
F
h
i
C
g
TRACKING
--
+
VCR
REC
DVD
REC MODE D.DUBBING AUDIO
I
CM SKIP SEARCH RAPID PLAY
4
5
Refer to 1 to 2 on page 75 and set
the selected item.
• For 3 refer to page 13.
When you finish with setting, press
[SETUP] to exit.
NB552
74
EN
E9E2ZUD_BZV420MW8.indd 74
2007/09/04 17:06:41
Introduction
SETUPS
Video (cont’d)
1
Progressive Scan (Default : OFF)
1) Use [K / L] to select “ON“, then press [OK].
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
Yes
No
If you have a standard TV:
Select “4:3 Letter Box” or “4:3 Pan and Scan”. The “4:3
Letter Box” setting will display the entire widescreen
DVDs on your standard TV, by placing black bars at the
top and bottom of the picture, like a normal DVD player
does. The “4:3 Pan and Scan” setting will fill the screen
vertically, but both sides of the widescreen DVDs will
be trimmed. Standard video input and standard DVDs
will appear normal with either setting.
If you have a widescreen TV:
Select the “16:9 Wide” setting. Widescreen DVDs will fill
the screen appropriately. To watch standard 4:3 video,
use your TV’s aspect control to set the screen to your
liking.
Playback
3) Use [K / L] to select “Yes“ within 15 seconds, then
press [OK].
Your setting will be activated.
Progressive Scan
TV Aspect TV Aspect
Video Input
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Recording
General Setting
Playback
Activating progressive scan:
Display
Progressive
Check your TV has progressive
scan Scan
Video
TVScan
Aspect
Progressive
and connect with
component
video cable.
Recording
Select Video
ON
Clock
OFF
Reset
All:
NOTE
Playback
Display
Video
Recording
Clock
Reset All
Basic Setup
Progressive Scan
TVScan
Aspect
Progressive
Video Input
ON
OFF
2) Use [{ / B] to select “Yes“, then press [OK].
Activate?
You should select the TV aspect ratio to match the TV that
you are connecting to the unit. You either have a
standard 4:3 TV or a widescreen TV (16:9 rectangular).
Use [K / L] to select your desired option, then press
[OK].
General Setting
General Setting
Playback
Display
Video
Recording
Clock
Reset All
TV Aspect (Default: 4:3 Letter Box)
Connections
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
2
Note
Editing
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the component
video cable (commercially available) to connect this
unit to the TV. (Refer to “Method 2” on page 14.) If
not, use the RCA video cable and set the progressive
scan to “OFF” or press and hold [SETUP] for more
than 3 seconds during DVD playback.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
Function Setup
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 75
75
2007/09/04 17:06:41
SETUPS
Reset All
Reset the setting to default.
STANDBY-ON
SOURCE TIMER SET DISPLAY OPEN/CLOSE
A
.@/:
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
0
1
2
3
SETUP
DISC MENU
o
OK
s
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Reset All”, then
press [OK].
Select “Yes” using [K / L] , then press
[OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
Reset to factory default?
Yes
No
B
TITLE
RETURN
p
B
j
F
h
i
g
C
TRACKING
--
+
VCR
REC
DVD
REC MODE D.DUBBING AUDIO
I
4
Select “Yes” again using [K / L] ,
then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Reset All
ResetAre
to factory
defauit?
you sure?
Yes
No
CM SKIP SEARCH RAPID PLAY
Your setting in recording will be initialized.
NB552
Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
– OSD language setting
– Clock setting
– Parental lock setting
– Timer programming information
76
EN
E9E2ZUD_BZV420MW8.indd 76
2007/09/04 17:06:42
Playback
3) During playback, press [PAUSE F].
Playback will pause and sound will be muted.
Press [VCR] first.
Before recording, make sure:
• The appropriate external input position (E1/E2) to which
your external tuner is connected is selected by pressing
[SOURCE].
• There is a cassette tape with a erase-protection tab in
the unit.
• The desired recording mode is selected in SP (standard
playback) or SLP (super long playback) mode by
pressing [REC MODE].
Recording mode:
Tape speed
4) Press [PLAY B] to resume playback.
Note
• When a cassette tape without erase-protection tab is
inserted, the unit will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[TRACKING / ].
T60
T120
T160
SP mode
1hour
2hours
2-2/3hours
SLP mode
3hours
6hours
8hours
• Refer to pages 25-28 for instructions on timer recording.
1) Press [REC I] to begin the recording.
To temporarily stop recording or to resume it, press
[PAUSE F]. After the unit has been in pause mode for
5 minutes, it will stop automatically to protect the
cassette tape and the video head from damage.
Playback
6) Press [STOP C / EJECT A] on the front panel of the
unit to eject the cassette tape.
Type of tape
Recording / playback time
Recording
5) Press [STOP C] to stop playback.
Basic Setup
2) Insert a prerecorded cassette tape. Press [PLAY B]
to begin playback.
Recording
Connections
1) Press [STANDBY-ON y] on the remote control or
the front panel of the unit.
When you are playing back a cassette tape, turn the TV
on and be sure to select the input to which the unit is
connected.
Press [VCR].
Introduction
VCR FUNCTIONS
2) Press [STOP C] when the recording is completed.
Editing
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette tape, remove its eraseprotection tab. To record on it later, cover
the hole with cellophane tape.
erase-protection tab
Function Setup
VCR Functions
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 77
77
2007/09/04 17:06:43
VCR FUNCTIONS
One-touch Timer Recording (OTR)
This feature allows you to set the recording length simply
by pressing [REC I] on the remote control.
Press [VCR] first.
1) During normal recording, press [REC I] to begin
the one-touch timer recording.
You can select a fixed recording time by pressing
[REC I] repeatedly.
(Normal recording)
(8:00)
(0:30)
(1:00)
Index Search
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
1) Press [SEARCH] so that “INDEX SEARCH” menu
appears.
2) Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
(7:30)
INDEX SEARCH
03
When the one-touch timer recording is finished, the
unit will turn off automatically.
To change the recording length during the one-touch
timer recording, press [REC I] repeatedly until the
desired length appear.
To cancel the one-touch timer recording within the
specified time, press [STOP C].
Note
• To see the remaining recording time on the TV
screen during the one-touch timer recording, press
[DISPLAY].
• You cannot pause the one-touch timer recording.
• If VCR the one-touch timer recording is completed
during DVD playback or recording, the VCR will be in
stop mode and the DVD keeps the current mode.
• Unlike a timer recording, you can perform the
following operations during the one-touch timer
recording.
- Turning off the power to stop one-touch timer
recording.
- Using [REC I] or [STOP C].
• When the one-touch timer recording is finished and
the power is turned off, the unit will switch to the
standby mode automatically if a timer recording has
been programmed. Press [TIMER SET] to cancel the
standby mode for using the unit continuously.
78
3) Press [E], [D] to start index search.
If you want to go in the forward direction, press [ D].
If you want to go in the reverse direction, press [E].
After index search, the VCR will play back the cassette
tape automatically.
CURRENT PROGRAM
Beginning
of tape
Pro.1
02
Pro.2
01
Pro.3
01
End
of tape
Pro.4
02
Pro.5
03
INDEX MARK
Note
• You can make the index mark up to 20.
EN
E9E2ZUD_BZV420MW8.indd 78
2007/09/04 17:06:43
Time Search
Press [VCR] first.
1) Press [SEARCH] repeatedly so that “TIME SEARCH”
menu appears.
TIME SEARCH
2:50
VCR Functions
HIFI
MONO
R-channel
non Hi-Fi tapes
Monaural
Monaural
Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
L+R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Hi-Fi tapes
recorded second
audio program
Second audio
program
Second audio
program
Second audio
program
Others
L-channel
Note
EN
Español
• Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video head.
• To return to playback from the picture search/still/
slow mode, press [PLAY B].
E9E2ZUD_BZV420MW8.indd 79
Function Setup
Your Selection
Type of recorded tape
Editing
• Index search and time search are not available
during recording.
• Press [STOP C] to stop the search.
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
Playback
Note
Fast forward:
When the unit is in stop mode, press [D] to fast forward
the cassette tape.
Rewind:
When the unit is in stop mode, press [E] to rewind the
cassette tape.
To cue or review picture during playback (picture search):
Press [E], [D] during playback.
Press it again and the unit will search in super high
speed. (in the SLP mode only)
To freeze the picture on TV screen during playback
(still mode):
Press [PAUSE F]. Each time you press the button, the
picture will be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [TRACKING / ]
on remote control.
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
Counter reset:
Press [CLEAR] to reset the counter to “0:00:00”.
To playback in slow motion:
Press [PAUSE F] during playback, then press [D].
Press [D] or [E] repeatedly to select the desired
speed.
Automatic rewind:
When a cassette tape is played back or fast forwarded to its
end, the cassette tape will rewind to the beginning, stop
and eject itself.
When you playback a cassette tape recorded in Hi-Fi
stereo:
Press [AUDIO] on the remote control to select Hi-Fi or
MONO for playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select
“MONO”.
Recording
3) Press [E], [D] to start time search.
If you want to go in the forward direction, press [D].
If you want to go in the reverse direction, press [E].
After time search, the unit will play back the cassette
tape automatically.
Press [VCR] first.
Basic Setup
2) Using [the Number buttons], enter your desired
time to skip within 30 seconds.
You can set the time up to 9:59.
Other Operations
Connections
This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
Introduction
VCR FUNCTIONS
79
2007/09/04 17:06:44
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
The power does not turn on.
There is no picture.
Cannot record a TV program.
TV program pictures are distorted.
Playback picture is distorted.
There is no sound.
D
V
D
•
V
C
R
Nothing was recorded even though
you set the timer setting correctly.
Timer recording is not complete or
did not start from the beginning.
Timer recording is impossible.
Remedy
• Check that the AC power cord is connected securely.
• Check the breaker (in case of power failure).
• Press [TIMER SET] to cancel the timer standby mode.
• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• Check the connection to your TV (page 14).
• Switch the input selector on your TV (such as to “E1”) so that the signal
from the unit appears on the TV screen.
• This unit does not have a tuner to receive TV broadcasting.
• You must connect this unit to an external tuner to record TV programs
(page 12).
• Check if all the connections are made correctly.
• Keep the device which may cause electrical disturbances, such as a
cellular phone, away.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
• Check the connections to the amplifier input.
• Check if the input device setting on the amplifier is correct.
• When the unit is in pause mode or in slow-motion playback mode,
sound is not output. This is not a malfunction.
• When the unit is in fast forward or fast reverse mode, sound is not
output. This is not a malfunction.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted for
more than 30 seconds. Reset the clock (page 20).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
• The timer setting overlapped with another setting that has priority (page 28).
• Disc space was not enough.
• Make sure TIMER REC indicator lights up on the front panel of this unit.
If not, press [TIMER SET].
The remote control does not function. • Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Check if the unit is turned on.
• Check if you are pointing the remote control at the recorder and NOT
the TV.
If you have a plasma TV, it may interfere with the IR signal. Try the
remote with the plasma off. If the remote works, you may need to move
the unit away from the plasma TV.
• Press [DVD] or [VCR], whichever you need. Then, try again.
• Press [TIMER SET] to cancel the timer standby mode.
The unit does not operate properly.
• When static electricity, etc., causes the unit to operate abnormally,
unplug the unit and then plug it in again.
80
EN
E9E2ZUD_BZV420MW8.indd 80
2007/09/04 17:06:45
Symptom
There is no picture.
Connections
Basic Setup
Recording
Playback
D
V
D
Editing
Function Setup
VCR Functions
Remedy
• If the main menu appears on the TV screen, press [RETURN] to exit.
• Check if the progressive scan mode is set correctly according to your TV
(page 75).
Picture noise appears.
• Clean the disc with a cleaning cloth.
Playback picture from the external
• If the picture output signal from the external devices passes through
devices connected to this unit is
this unit to get to your TV, the copy protection signal applied to some
distorted.
DVD could affect the picture quality. Disconnect the playback device in
question and connect it directly to your TV.
There is no sound.
• If you are using DIGITAL AUDIO OUTPUT (COAXIAL) jack, check the setting
in “Disc Audio” (page 71).
• Clean the disc with a cleaning cloth.
Sound is noisy.
• Clean the disc with a cleaning cloth.
No DTS sound is output.
• This unit is not compatible with DTS sound.
The disc does not play back.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 40).
• The region code on the DVD-video does not match the unit (page 40).
• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play back
the disc if it was not finalized.
Discs recorded on this unit cannot be • If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the
played back on other DVD players.
disc after recording (page 36).
The disc does not start playback from • Resume playback was activated (page 46). Press [STOP C] twice.
the beginning.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first insert.
The unit starts playing back the disc
• The DVD-video features an auto playback function.
automatically.
Some functions such as stop, search, • Depending on the disc, you may not be able to do some of the
or slow-motion playback cannot be
operations. Refer to the manual supplied with the disc.
performed.
The language for the sound track
• The title does not have the multilingual audio tracks.
cannot be changed.
• The DVD-video prohibits the changing of the language for the sound
track.
The subtitle language cannot be
• Multilingual subtitle are not recorded on the DVD-video.
changed or turned off.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc
contains a multi-angle portion. Actual change will be performed when
the portion has come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.
Recording does not stop immediately • It may take a few seconds for the unit to input disc data before
after you press [STOP C].
recording stops.
The disc tray does not open when you
• It may take a few seconds for the disc tray to open after you have
recorded or edited a disc. This is because the unit is adding disc data to
press [OPEN/CLOSE A].
the disc.
Introduction
TROUBLESHOOTING
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 81
81
2007/09/04 17:06:45
TROUBLESHOOTING
Symptom
“Repairing” appears on the TV screen.
Repairing
D
V
D
In a case you intend to cancel the
repairing process.
Do you want to cancel a repairing process ?
When selecting “Yes”, the disc may not be
usable.
Remedy
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
• If you intend to cancel the repairing process, press [OPEN/CLOSE A]
on the front panel, then select “Yes” and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Yes
No
Repairing
Picture noise appears.
V
C
R
82
• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”
(page 5).
• Adjust tracking control for better picture by pressing [TRACKING / ]
while you are playing back a cassette tape.
The cassette tape does not play back. • No cassette tape is inserted.
Recording does not start after you
• Make sure the cassette tape has a erase-protection tab when you record
press [REC I].
to a cassette tape. If needed, cover the hole with cellophane tape.
The remote control does not function. • Check if a cassette tape is in this unit.
The motor rotates even when
• The motor may rotate for the duration of approximately 5 minutes for
efficient operation. This is not a malfunction.
playback / recording is stopped.
EN
E9E2ZUD_BZV420MW8.indd 82
2007/09/04 17:06:45
Error message
Cause
Solution
• Insert the standardized disc which bear
the marks on page 40.
• Insert the disc with the labeled side
facing up.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 70).
Recording Error
This program is not allowed to be
recorded.
• The recording function encountered
the copy prohibited program.
• You cannot record copy prohibited
programs.
Recording Error
This program is not recordable in +VR
mode.
• You are trying to record the copy-once
program.
• You cannot record the copy-once
program.
Recording Error
Can not record on this disc.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• The disc is dirty.
• The disc is damaged.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 21).
• Clean the disc with a cleaning cloth.
• Replace the disc.
Recording Error
This disc is protected and not recordable.
• You are trying to record on to the
protected disc which is set in “Disc Edit”
menu.
• Release the disc protect setting in “Disc
Edit” menu (page 35).
Recording Error
Disc is full.
(No area for new recording)
• You are trying to record onto the disc
which has no space for recording.
• Insert the recordable disc with enough
recording space.
Recording Error
You cannot record more than 49 titles on
one disc.
(The maximum is 49)
• You are trying to record onto the disc
on which the number of recording titles
comes up to the maximum (49).
• Delete unnecessary titles (page 56).
Recording Error
You cannot record more than 254 chapters
on one disc.
(The maximum is 254)
• You are trying to record onto the
DVD+RW or DVD-RW on which the
number of recording chapters comes
up to the maximum (254).
• Delete unnecessary chapter marks
(pages 59-60).
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
• Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record full
49 titles.
• Insert a new disc.
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Release the finalizing for this disc
(page 36).
Recording Error
The disc has no recording compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
• You are trying to record onto the
disc that had been recorded by other
recorders.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 22).
Basic Setup
• Unplayable disc is inserted in the unit.
• The disc is upside down.
Connections
Disc Error
— Please eject the disc. —
Playback feature may not be available on
this Disc.
Introduction
TROUBLESHOOTING
Recording
Playback
Editing
Function Setup
VCR Functions
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
Others
Español
EN
E9E2ZUD_BZV420MW8.indd 83
83
2007/09/04 17:06:46
TROUBLESHOOTING
Frequently Asked Questions
– Can I record to CD-RW/-R?
No, this unit records only DVD.
– Can I play back DVD-video that is bought in another
country?
Possible when the region code of the disc is 1 and All.
– Can I connect the unit to my PC?
No, you cannot control the unit by PC.
– Can I program a timer recording with external tuner?
Yes, you can. Select “E1” or “E2” as your recording
channel, and leave the external tuner on (pages 12, 2528).
– Can I record one channel while watching another
channel using an external tuner?
It depends on your connection configurations. For more
details, please kindly contact at your local store.
– Can I change the channels on the external tuner using
the remote control of this unit?
No. Changing the channels on the external tuner using
this unit’s remote control is not possible. You need to use
the remote control supplied with the external tuner to
change the channels on the external tuner.
84
EN
E9E2ZUD_BZV420MW8.indd 84
2007/09/04 17:06:46
Function Setup
VCR Functions
Others
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Editing
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Playback
Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Recording
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Basic Setup
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Connections
Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Introduction
LANGUAGE CODE
Español
EN
E9E2ZUD_BZV420MW8.indd 85
85
2007/09/04 17:06:46
GLOSSARY
Analog Audio
PBC (playback control) (video CD only)
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
This function enables you to play back interactive
software using a menu screen. See also “Video CD”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Chapter
Just as a book is split up into several chapters, a title on a
DVD is usually divided into chapters. See also “Title”.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video
(525p/480p), you can experience higher-density picture
than that in interlace (525i/480i).
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analogto-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
Dolby Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
Finalize
PCM (pulse code modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Progressive Scan (525p/480p)
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(525i/480i) TV signals. Refer to page 75 for instructions on
selective progressive scan mode.
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
To make DVD, which have been recorded on, possible to
play back in DVD players. With this unit, it is possible to
finalize DVD+R, DVD-RW, and DVD-R.
Title (DVD only)
MP3 (MPEG audio layer 3)
Audio CD use tracks to divide up the content of a
disc. The DVD equivalent is called a chapter. See also
“Chapter”.
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.
A collection of chapters on DVD. See also “Chapter”.
Track
Video CD
A digital format for store video data in compact disc.
86
EN
E9E2ZUD_BZV420MW8.indd 86
2007/09/04 17:06:46
Introduction
SPECIFICATIONS
General
System
Video recording format
Sampling frequency
Compression format
Front
13.5 MHz
MPEG
48 kHz
Dolby Digital
2V rms (input impedance: more than 22kΩ)
Playback
1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
2V rms (input impedance: more than 22kΩ)
2V rms (output impedance: more than 1kΩ)
Editing
Rear
+VR (video recording) format
DVD+Rewritable, DVD+Recordable
DVD-Rewritable, DVD-Recordable (+VR mode only)
Recording
1Vp-p (75Ω)
1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
Y: 1Vp-p (75Ω)
PB/CB: 700mVp-p (75Ω)
PR/CR: 700mVp-p (75Ω)
VCR Functions
500mVp-p (75Ω)
Function Setup
Audio recording format
Sampling frequency
Compression format
Terminals
Audio input
RCA jack x 2
Video input
RCA jack x 1
S-video input
Mini DIN 4-pin x 1
Audio input
RCA jack x 2
Audio output
RCA jack x 4
Video input
RCA jack x 1
Video output
RCA jack x 1
S-video input
Mini DIN 4-pin x 1
S-video output
Mini DIN 4-pin x 1
Component video output
RCA jack x 3
Coaxial digital audio output
RCA jack x 1
Basic Setup
Recording discs
Connections
VCR video heads
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
Operating temperature
Operating humidity
Recording
Recording format
DVD+RW/+R, DVD-RW/-R, DVD-video, CD-DA, Video CD, CD-RW/-R
VHS cassette tape
Four heads
120V AC +/-10%, 60Hz +/-5%
30W (standby: 3.3W)
17.2 x 4.0 x 10.3 inches (435 x 99.5 x 260mm)
9.5 lbs. ( 4.3kg )
41°F (5°C) to 104°F (40°C)
Less than 80% (no condensation)
Others
Español
Note
• The specifications and design of this product are subject to change without notice.
EN
E9E2ZUD_BZV420MW8.indd 87
87
2007/09/04 17:06:46
ESPAÑOL
Discos Reproducibles
Disco Grabable
Este aparato es compatible con la reproducción de los
siguientes discos y archivos.
Discos reproducibles
Logotipos
DVD-video
DVD+RW
DVD+R
DVD-RW
(Sólo discos en modo de video finalizados)
DVD-R
(Sólo discos en modo de video finalizados)
CD-DA (CD de audio)
CD de video
Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y
DVD-R.
Los discos DVD+R/DVD-R pueden ser grabados sólo una
vez. Los discos DVD+RW/DVD-RW pueden ser grabados y
borrados muchas veces.
En este aparato los discos DVD-RW/-R serán grabados
automáticamente en el modo DVD+VR.
• Los siguientes discos se recomiendan para obtener una
buena calidad de grabación y han sido comprobados
como compatibles con este aparato. Sin embargo, según
sea la condición del medio el equipo podría no leer el
disco correctamente.
Verbatim
DVD+R 8x,
DVD+RW 4x,
DVD-R 8x,
DVD-RW 2x
JVC
DVD-RW 4x
Maxell
DVD+R 4x/8x/16x, DVD-R 8x/16x
SONY
DVD+R 4x/8x/16x, DVD+RW 4x
TDK
DVD+R 4x/8x/16x
El comportamiento de cualquier otro disco no está
garantizado.
• Usted puede reproducir discos DVD+RW en la
mayoría de los reproductores de DVD sin finalizarlos.
Sin embargo, si usted ha añadido o eliminado
capítulos, u ocultado capítulos, debe ejecutar
“Compatibilizar edic.” antes de poder ver dichos
efectos en otros equipos. (Consulte la página 67.)
Para reproducir discos que no sean DVD+RW en
otros reproductores de DVD, usted necesitará
finalizarlos.
Logotipo
Atributos
CD-RW
DVD+RW
DVD+R
DVD-RW
DVD-R
CD-R
Archivos reproducibles
Medio
Disco de 8 cm / 12 cm, un solo lado,
una sola capa
Tiempo de grabación máx. aprox.
(modo SLP):
360 minutos (4,7 GB) (para 12 cm)
108 minutos (1,4 GB) (para 8 cm)
CD-DA
CD-RW/-R
MP3
es una marca registrada de
DVD Format/Logo Licensing Corporation.
Códigos de Región
El número presente en el interior
el globo se refiere a una región
del mundo.Este aparato puede
reproducir discos DVD que estén
rotulados para ALL las regiones o
para la región 1.
88
Disco no Grabable
• Un DVD-RW grabado en un modo distinto de +VR no
será grabable en este aparato a menos que usted borre
todo el contenido del disco. (Consulte la página 66.)
• Un DVD-R grabado en un modo distinto de +VR no será
grabable en este aparato.
ES
E9E2ZUD_BZV420MW8.indd 88
2007/09/04 17:06:46
Introduction
ESPAÑOL
Conexión a un Sintonizador Externo
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
2) Efectúe la conexión como se ilustra abajo.
AUDIO IN
L
VIDEO IN
R
parte trasera de su televisor
cable coaxial de RF
señal de TV
DVD/VCR
S-VIDEO
IN --- AUDIO --- OUT
ANT. IN
cable de
video RCA
S-VIDEO
OUT
R
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO COMPONENT
VIDEO OUT
OUT
S-VIDEO
Y
IN ---VIDEO --- OUT
PB
/CB
IN
VIDEO
OUT
Basic Setup
cable de
audio RCA
L
IN
Connections
ej.)
cable coaxial
de RF
AUDIO OUT
L
R
DVD/VCR
IN --- AUDIO --- OUT
L
L
R
R
IN ---VIDEO --- OUT
PR
/CR
OUT
parte trasera de este aparato
IN
o
Recording
cable de S-video
cable de video RCA
sintonizador externo
cable de audio RCA
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.
Playback
Selección de un Canal de Entrada Externo en el Televisor
Luego de completar las conexiones, cambie el selector de entrada del televisor a un canal de entrada externo
adecuado. Presione un botón que seleccione un canal externo de entrada en el control remoto original del
televisor hasta que aparezca la imagen inicial del grabador de DVD. Para obtener detalles consulte el manual
del propietario de su televisor.
5
Utilice [K / L] para seleccionar el tipo
de conector hembra de entrada a
conectar, y luego presione [OK].
Ajuste general
Utilice [K / L] para seleccionar
“Video”, y luego presione [OK].
Reproduc.
Pantalla
Video
Grabación
Reloj
Rest. todo
Escaneo progresivo
Aspecto de TV
E1Entrada
(Tras.) Entrada
de videode video
VCR Functions
de Video
E1Entr.
(Tras.)
Video-S
E2Entr.
(Front.)
Utilice [K / L] para seleccionar
“Entrada de video”, y luego presione
[OK].
6
Para salir presione [SETUP].
Others
Utilice [K / L] para seleccionar la
posición de la entrada externa
deseada, y luego presione [OK].
Ajuste general
Reproduc.
Pantalla
Video
Grabación
Reloj
Rest. todo
Function Setup
1
2
3
4
Presione [SETUP] y utilice [K / L]
para seleccionar “Ajuste general”, y
luego presione [OK].
Editing
Configuración de la Entrada de Video
Antes de efectuar una grabación se debe informar al aparato qué conector hembra de entrada de video se está utilizando.
Escaneo progresivo
Aspecto de TV
Entrada Entrada
de videode video
E1 (Tras.)
E2 (Front.)
Español
ES
E9E2ZUD_BZV420MW8.indd 89
89
2007/09/04 17:06:48
ESPAÑOL
Configuración Inicial
Cuando usted encienda este aparato por primera vez
necesita seguir estos pasos.
1
2
Presione [STANDBY-ON y].
Grabación Básica
1
Encienda el televisor. Seleccione la entrada a
la cual está conectado el aparato.
* Asegúrese de que el disco
sea compatible con este
aparato.(Para obtener la
lista de discos compatibles
consulte la página 21.)
Utilice [K / L] para seleccionar su
idioma deseado, y luego presione
[OK] para establecerlo.
Initial Setup
OSD Language
English
Français
Español
Presione [DVD].
Presione [OPEN/CLOSE A] para abrir
la bandeja de discos e insertar su
disco con el rótulo aupntando hacia
arriba.
2
Para seleccionar un modo de
grabación presione [REC MODE].
SP(2Hr)
Modo de
grabación
3
Presione [OK] para activar “Ajste
Manual de Reloj”.
Ajuste inicial
Ajste Manual de Reloj
--- / -- / ---- (---)
-- : -- --
4
HQ (1Hr)
SP (2Hr)
SPP (2.5Hr)
LP (3Hr)
EP (4Hr)
SLP (6Hr)
Utilice [{ / B] para seleccionar un
elemento a configurar, y utilice [K / L]
para seleccionar el contenido de su
preferencia, y luego presione [OK].
Ajuste inicial
Ajste Manual de Reloj
ENE / 01 / 2007 ( LUN )
12 : 00 AM
0:58
Calidad del video
Tiempo de
y el sonido
grabación
Disco de 8 cm Disco de 12 cm
18 min
60 min
Buena
36 min
120 min
45 min
150 min
54 min
180 min
72 min
240 min
Deficiente
108 min
360 min
3
Presione [SOURCE] para seleccionar
la posición adecuada de la entrada
externa (E1/E2) a la cual está
conectado su sintonizador externo.
Luego seleccione en el sintonizador
externo el canal que desea grabar.
4
Presione [REC I] para iniciar la
grabación.
Para configurar la grabación a un toque
con temporizador (OTR)...
Esta es una manera sencilla de configurar el tiempo de
grabación en bloques de 30 minutos.
Presione [REC I] repetidamente hasta que aparezca
en la pantalla del televisor la longitud deseada de
grabación (30 minutos a 6 horas).
Comenzará la grabación a un toque con temporizador.
I
0:30
0:30
(grabación normal)
6:00
1:00
5:30
• Para cancelar la grabación a un toque con
temporizador dentro del tiempo especificado,
presione [STOP C].
90
ES
E9E2ZUD_BZV420MW8.indd 90
5
Para de tener la grabación presione
[STOP C].
2007/09/04 17:06:48
Introduction
ESPAÑOL
Grabación con Temporizador
A
ABC
1
2
DEF
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
TIMER
SPACE
CLEAR
3
4
5
Empieza Termina
Prog. nuevo
2
SETUP
DISC MENU
Configure una programación del
temporizador.
Presione [OK].
Presione [TIMER SET] para configurar
una programación del temporizador.
El indicador TIMER REC del panel frontal se iluminará.
Fcha
ENE/02
E1/E2
E1
o
Empieza
--:-GRAB a
DVD
Termina
--:-Modo
SP
SP
OK
s
i
Empieza
12 : 00AM
GRAB a
DVD
Termina
--:-Modo
SP
SP
g
REC
B
p
2 : 00
+
Fcha
ENE/02
E1/E2
E1
DVD
Empieza
12 : 00AM
GRAB a
DVD
REC MODE D.DUBBING AUDIO
Termina
1 : 00AM
Modo
SP
SP
I
o
B
p
1 : 00
Seleccione un medio de grabación (“DVD” o “VCR”).
CM SKIP SEARCH RAPID PLAY
Empieza
12 : 00AM
GRAB a
DVD
Termina
1 : 00AM
Modo
SP
SP
o
VCR Functions
Fcha
ENE/02
E1/E2
E1
B
p
1 : 00
Seleccione un modo de grabación.
Fcha
ENE/02
E1/E2
E1
Empieza
12 : 00AM
GRAB a
DVD
Termina
1 : 00AM
Modo
SP
SP
Function Setup
--
o
Seleccione la posición adecuada de la entrada
externa (E1/E2) a la cual está conectado su
sintonizador externo.
C
TRACKING
VCR
2 : 00
Editing
Fcha
ENE/02
E1/E2
E1
4
B
h
B
p
Configure las horas de inicio y finalización.
RETURN
p
F
o
B
TITLE
j
E1/E2
Configure la fecha.
0
1
LUN ENE/01 11:00AM
Fcha
Playback
.@/:
5
Programaci. con Reloj
Recording
SOURCE TIMER SET DISPLAY OPEN/CLOSE
Utilice [K / L] para seleccionar “Prog.
nuevo”, y luego presione [OK].
Basic Setup
STANDBY-ON
1
2
Presione [TIMER].
Connections
Usted puede programar el equipo para que grabe hasta 12
programas, con un mes de anticipación. También hay
disponibles grabaciones de programas diarias o semanales.
Antes de grabar, asegúrese de que
• Cuando llegue el momento en que desea empezar a
grabar, conecte el sintonizador externo a ya sea E1 o E2 y
configúrelo para dar salida a las señales de audio/video.
• No cambie el canal del sintonizador externo cuando esté
grabando. Usted no puede mirar un canal y grabar otro
al mismo tiempo.
• Antes de establecer una programación del temporizador
configure el reloj.
• Inserte un disco grabable con suficiente espacio libre.
o
p
1 : 00
NB552
1
Abra la bandeja
de discos.
OPEN/CLOSE
A
2
Inserte un disco.
3
Comience a
reproducir.
B
4
Detenga la
reproducción.
Others
Reproducción
C
Español
ES
E9E2ZUD_BZV420MW8.indd 91
91
2007/09/04 17:06:49
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI CORPORATION
Customer Service
Tel: 1-800-605-8610
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
E9E2ZUD_BZV420MW8.indd 92
E9E2ZUD
1VMN24193 ★★★★★
2007/09/04 17:06:53