23PME Manual Sheet
Note: Factory Pass Code is 12345678
OPENING THE SAFE FOR THE FIRST TIME
1. Remove the Back-up key cover away.
2. Insert the Back-up key into the keyhole and turn anticlockwise, hole
the position, at the same time, turn the handle
Warning: Do not store your back up keys inside the safe.
PROGRAMMING YOUR PASSCODE
With the door unlocked, press the reset button (the red button on hinge
side) and the buzzer beeps twice and yellow light flashes twice. Then
yellow light on.
Input 1 to 8 digits and end with “#” button to confirm the setting.
The buzzer beeps twice and green light flashes twice, it means new code
was successful.
If the buzzer beeps five (5) times and yellow light flashes five (5) times
and yellow light goes on, the code failed. Press reset button again and
repeat code programming sequence.
NOTE: The code can be 1 to 8 digits.
TURNING
THE
KEYPAD
SOUND
OFF/ON
WITH
MUTE-SYSTEM
You can mute/unmute the keypad by entering the “*”button with 1
yellow light flash.
NOTE: In the factory settings, the sound has been turned on.
HOW TO OPEN THE DOOR
Input the passcode and end with “#” button.
If wrong code entered, it beeps five (5) times with yellow light flashes.
If correct code entered, the buzzer beeps twice with green light flashes
twice and the lock is open.
Turn the handle clockwise to open the safe.
HOW TO CLOSE THE DOOR
Close the door and turn the knob counter-clockwise.
SAFE WITH ALARM SYSTEM
If 3 incorrect passcode entries are made in succession, the alarm
will sound for 50 seconds.
Before inputting any code, pressing “3” for 3 seconds, it beeps
twice with yellow light flashes, it will active the vibration alarm.
It will sound for 50 seconds once safe is impacted or moved.
To stop the alarm from sounding, enter the correct passcode.
Note: The vibration alarm function will be terminated after
inputting correct passcode, need to reset to active.
BATTERY REPLACEMENT
When inputting any code the red light and green light will be on for
indicating low battery, please replace with new battery.
">
