poly-planar MA4055 Round Speaker Installation Guide

The poly-planar MA4055 is a round speaker designed for easy installation. It includes mounting screws and clips for secure attachment. Wire connections are clearly marked for quick and straightforward setup. The speaker is designed to provide high-quality audio reproduction. It can be used in a variety of applications, including home theaters, commercial spaces, and marine environments.

PDF

Document

MA4055 Round Speaker Installation Guide
Cutout and use as template for drilling
1/8”
Hole Diameter
5.89” (149.5mm)
Overall Diameter
Installation: Find a suitable location making
sure there is clearance for the installed depth.
Use a hole saw or other suitable device to
make a cutout.
Place the speaker in the cutout and mark
and drill holes for the mounting screws
(supplied). If the panel is too thin or soft for
screws use the stainless screw clips in the
hardware kit.
Attach speaker wires supplied, solid color
wire to positive (red mark or with + sign or
larger tab as shown on the diagram).
4.41” (112mm)
Cutout Diameter
Scale= 1:1
Reproduction may change
accuracy
119 Fabricators Street, Suite A • Summerville, SC 29483 • Tel 843.936.4080 • [email protected] • www.polyplanar.com
Mounting Depth
2.17” (55mm)
">

Hello! I am an AI chatbot specifically trained to assist you with the poly-planar MA4055 Installation Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Round speaker
Easy Installation
Mounting Screws and Clips
Clear wire connections for setup
Designed for high-quality audio reproduction

Frequently asked questions

Find a suitable location with enough clearance for the speaker's depth. Use a hole saw or other device to make a cutout. Place the speaker in the cutout and mark and drill holes for the mounting screws. Attach the speaker wires, making sure the solid color wire goes to positive (+) and the striped wire goes to negative (-)

The speaker comes with mounting screws and stainless steel clips. The screws can be used if the panel is thick enough. If the panel is thin or soft, use the stainless steel clips instead.

Attach the speaker wires supplied. Solid color wire to positive terminal (red mark or with + sign or larger tab as shown on the diagram).