MA4054 Round Speaker Installation Guide
Cutout and use as template for drilling
4.02
”
Cutout Diameter
5.20
”
Overall Diameter
1/8”
Hole Diameter
Installation: Find a suitable location making sure there is clearance for the installed depth.
Use a hole saw or other suitable device to make a cutout.
Place the speaker in the cutout and mark and drill holes for the mounting screws
(supplied). If the panel is too thin or soft for screws use the stainless screw clips in the hardware kit.
Attach speaker wires supplied, solid color wire to positive (white dot or with + sign or larger tab as shown on the diagram).
Mounting Depth
2.13
”
Scale= 1:1
Reproduction may change accuracy
1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000 • Fax (410) 761-6274 • www.polyplanar.com
