PROSPOT 3
VISOR ACCESSORY INSTALLATION
Black Linear
!
WARNING:
!
Install product in accordance
with local/NEC codes.
Disconnect power during
installation and servicing.
Failure to comply
with the installation
instructions may
result in death or
serious injury.
Read all safety
instructions included
with product before
installing.
CAUTION:
Insight Lighting is not responsible
for the structural itegrity of the
building to the luminaire. Additional
backing may be required.
INSTALLATION
Care must be taken during storage and handling.
Store in a clean, cool and dry location.
Electrostatic discharge can harm this product.
Avoid static discharge while handling this product.
+
Install (in the following order) ring (B), visor (C), and second ring (B) using 6-32 screws (D). Mount in tapped holes
on luminaire (A). Requires regular maintenance. Remove debris that becomes trapped by uninstalling HSL kit and
re-installing according to instructions.
ADDITIONAL RESOURCES
WIRING
SPECIFICATION
DIAGRAM
SHEET
WHITE LIGHT
WHITE LIGHT
COLOR CHANGING
COLOR CHANGING
FIXTURE PROFILE
D x4
6-32
SCREW
0.38”
C
COMPONENTS
A
B x2
B
LUMINAIRE
D
RING
x2
C
VISOR
x4
A
6-32 SCREW
Revised: June 8, 2023
Specifications subject to change without notice
Black Linear
4341 Fulcrum Way NE, Rio Rancho,
New Mexico 87144
P: 505.345.0888 | insightlighting.com
PROSPOT 3
VISOR + HSL/OPTICAL KIT ACCESSORY INSTALLATION
Black Linear
!
WARNING:
!
Install product in accordance
with local/NEC codes.
Disconnect power during
installation and servicing.
Failure to comply
with the installation
instructions may
result in death or
serious injury.
Read all safety
instructions included
with product before
installing.
CAUTION:
Insight Lighting is not responsible
for the structural itegrity of the
building to the luminaire. Additional
backing may be required.
INSTALLATION
Care must be taken during storage and handling.
Store in a clean, cool and dry location.
Electrostatic discharge can harm this product.
Avoid static discharge while handling this product.
+
Install (in the following order) ring (B), visor (D), HSL/optical kit (C), and second ring (B) using 6-32 screws (E).
Mount in tapped holes on luminaire (A). Adjust beam orientation by rotating HSL/Optical Kit. Requires regular
maintenance. Remove debris that becomes trapped between lenses by uninstalling HSL kit and re-installing according
to instructions.
ADDITIONAL RESOURCES
WIRING
SPECIFICATION
DIAGRAM
SHEET
WHITE LIGHT
WHITE LIGHT
COLOR CHANGING
COLOR CHANGING
FIXTURE PROFILE
E x4
6-32
SCREW
0.38”
BEAM ORIENTATION
ATTENTION:
INSTALL HSL/OPTICAL KIT
GLOSSY SIDE UP.
C
D
COMPONENTS
A
B x2
B
LUMINAIRE
D
x2
HSL/OPTICAL
KIT
RING
E
C
x4
A
VISOR
Revised: June 8, 2023
Specifications subject to change without notice
6-32 SCREW
Black Linear
4341 Fulcrum Way NE, Rio Rancho,
New Mexico 87144
P: 505.345.0888 | insightlighting.com
PROSPOT 3
HSL/OPTICAL KIT INSTALLATION
Black Linear
!
WARNING:
!
Install product in accordance
with local/NEC codes.
Disconnect power during
installation and servicing.
Failure to comply
with the installation
instructions may
result in death or
serious injury.
Read all safety
instructions included
with product before
installing.
CAUTION:
Insight Lighting is not responsible
for the structural itegrity of the
building to the luminaire. Additional
backing may be required.
INSTALLATION
Care must be taken during storage and handling.
Store in a clean, cool and dry location.
Electrostatic discharge can harm this product.
Avoid static discharge while handling this product.
+
Install (in the following order) ring (B), HSL/optical kit (C), and second ring (B) onto luminaire (A) using 6-32, screws
(E). Mount in tapped holes on luminaire (A). Adjust beam orientation by rotating HSL/Optical Kit. Requires regular
maintenance. Remove debris that becomes trapped between lenses by uninstalling HSL kit and re-installing according
to instructions.
ADDITIONAL RESOURCES
WIRING
SPECIFICATION
DIAGRAM
SHEET
WHITE LIGHT
WHITE LIGHT
COLOR CHANGING
COLOR CHANGING
FIXTURE PROFILE
D x4
6-32
SCREW
0.38”
BEAM ORIENTATION
ATTENTION:
INSTALL HSL/OPTICAL KIT
GLOSSY SIDE UP.
COMPONENTS
A
B
C
LUMINAIRE
D
RING
x2
C
HSL/OPTICAL
KIT
x4
B x2
6-32 SCREW
A
Revised: June 8, 2023
Specifications subject to change without notice
Black Linear
4341 Fulcrum Way NE, Rio Rancho,
New Mexico 87144
P: 505.345.0888 | insightlighting.com
PROSPOT 3
SNOOT ACCESSORY INSTALLATION
Black Linear
!
WARNING:
!
Install product in accordance
with local/NEC codes.
Disconnect power during
installation and servicing.
Failure to comply
with the installation
instructions may
result in death or
serious injury.
Read all safety
instructions included
with product before
installing.
CAUTION:
Insight Lighting is not responsible
for the structural itegrity of the
building to the luminaire. Additional
backing may be required.
INSTALLATION
Care must be taken during storage and handling.
Store in a clean, cool and dry location.
Electrostatic discharge can harm this product.
Avoid static discharge while handling this product.
+
Install (in the following order) ring (B), snoot (C), and second ring (B) using 6-32 screws (D). Mount in tapped holes
on luminaire (A). Requires regular maintenance. Remove debris that becomes trapped by uninstalling HSL kit and
re-installing according to instructions.
ADDITIONAL RESOURCES
WIRING
SPECIFICATION
DIAGRAM
SHEET
WHITE LIGHT
WHITE LIGHT
COLOR CHANGING
COLOR CHANGING
FIXTURE PROFILE
D x4
6-32
SCREW
0.38”
C
COMPONENTS
A
B x2
B
LUMINAIRE
D
RING
x2
C
SNOOT
x4
A
6-32 SCREW
Revised: June 8, 2023
Specifications subject to change without notice
Black Linear
4341 Fulcrum Way NE, Rio Rancho,
New Mexico 87144
P: 505.345.0888 | insightlighting.com
PROSPOT 3
INTEGRAL HEX LOUVER ACCESSORY INSTALLATION
Black Linear
!
WARNING:
Install product in accordance
with local/NEC codes.
Disconnect power during
installation and servicing.
!
Failure to comply
with the installation
instructions may
result in death or
serious injury.
Read all safety
instructions included
with product before
installing.
CAUTION:
Insight Lighting is not responsible
for the structural itegrity of the
building to the luminaire. Additional
backing may be required.
INSTALLATION
Care must be taken during storage and handling.
Store in a clean, cool and dry location.
Electrostatic discharge can harm this product.
Avoid static discharge while handling this product.
+
Loosen and remove lens (B) from luminaire (A). Install Hex Louver (B) on top of optic internally. Replace and tighten
lens (C) onto luminaire (A) to secure in place.
ADDITIONAL RESOURCES
WIRING
SPECIFICATION
DIAGRAM
SHEET
WHITE LIGHT
COLOR CHANGING
NOT FIELD INSTALLABLE CONTACT
FACTORY TO PREVENT WARRANTY
FROM BECOMING VOID
WHITE LIGHT
COLOR CHANGING
FIXTURE PROFILE
B
C
COMPONENTS
A
B
C
A
LUMINAIRE
Revised: June 8, 2023
Specifications subject to change without notice
LENS
HEX LOUVER
Black Linear
4341 Fulcrum Way NE, Rio Rancho,
New Mexico 87144
P: 505.345.0888 | insightlighting.com
">
