Quick Guide
USB adapter
For connection of the Konftel 50 and
Konftel 60W to a computer
EnGliSh
Conference phones for every situation
DeSCriPtion – Konftel 50 anD 60W
leDs
Green 1 /blue 2 – microphone on
Red – microphone off three speakers Microphone, 360° sound recording
Sockets for extra microphones
Cable duct line connection
Power supply
1 Konftel 50
2 Konftel 60W
Holes for wall bracket on/off
Answers a call
–
Reduces speaker volume
Mute
Switches off the microphone
+
Increases speaker volume trim
Tunes the sound quality
The Konftel 50 and Konftel 60W are conference units for connection to an existing fixed system phone, DECT telephone, mobile phone or computer. The USB adapter makes it possible to connect the units to a computer that does not have a suitable sound port. The USB adapter functions as a sound card in a computer without inputs and outputs for sound. Connection with a USB adapter and its use are the same for both a Konftel 50 and a Konftel 60W.
You can use Konftel 50/60W for software that communicate over the Internet (e.g. Skype). You make, answer and end calls in the software. Konftel 50/60W functions as a speaker and microphone when it is switched on.
Konftel 50/60W has a omnidirectional, highly-sensitive microphone and three speakers which, together with Konftel’s OmniSound ® provide optimal sound quality and maximum reduction of room echo, even when the person speaking is standing at a slight distance from the unit. The user guide and Konftel’s website www.konftel.com offer suggestions for various accessories and applications.
Konftel is a leading company within loudspeaker communication and audio technology.
We develop and sell products and technology for telephone meetings based on cutting-edge expertise within acoustics and digital signal processing. Characteristic of our products is that all conference telephones contain the same high quality audio technology – Omni-
Sound ® – providing crystal clear sound. Learn more about Konftel and our other products on www.konftel.com
ConneCtion
Bottom of
Konftel 50/60W
Connection cable electricity, 6 m Plug adapter
Mains socket 230V
(120 V in USA)
Connection cable computer, 1.5 m
USB port on computer
USB adapter with cable
(Item no. 900102058)
Connect the USB adapter to Konftel 50/60W as shown in the picture.
Green plug --- Output labelled SPK on USB adapter
Pink plug ----- Output labelled MIC on USB adapter
Connect the USB adapter to a USB port on the computer as shown in the picture.
Plug Konftel 50/60W in using the power adapter as shown in the picture.
Check the sound properties and adjust the sound volume in the same way as for a computer with built-in inputs and outputs for sound as indicated in the instructions on the next page.
Developed by Konftel AB
Box 268, SE-901 06 Umeå, Sweden
Phone: +46 90 706 489
Fax: +46 90 131 435
E-mail: [email protected]
Web: www.konftel.com
3148-61-001 rev B
SettinGS on tHe CoMPUter
Checking the sound unit in Windows
There follows an example of how such items appear on a computer with Windows XP. In a Macintosh you open the computer’s system settings to select sound inputs and adjust sound levels.
Open Properties for Sound and audio
Devices. (Right click on the speaker symbol in the Activity field and select adjust audio
Properties from the quick menu or use the start menu: Start > Control panel > Sound
and audio Devices.
Click on the audio tab and check that USB
Headset is selected as the default device.
adjust the speaker volume in Windows
Click on the Volume... button under Sound
playback on the tab audio.
Adjust the sound level for Volume Control so that it is between the intermediate and maximum level.
This setting adjusts the line output level from the computer. A low sound level here means that you must increase the volume on Konftel 50/60W to the maximum level, which may lead to fuzzy sound and a low sound level.
Check the sound level when you playback sounds (any sound source in the computer).
Please note that Konftel 50/60W must be switched on.
adjusting the speaker volume on Konftel 50/60W
If necessary, the volume on Konftel 50/60W can be adjusted during a call. or
Increase the speaker volume using + and reduce it using –.
adjusting the microphone volume in Windows
Click on the Volume... button under Sound
recording on the tab audio.
Adjust the microphone input between the intermediate and maximum level. Connect a call and adjust the volume if required.
It is best to use the communication software you intend to use with Konftel 50/60W when testing the microphone volume.
adjusting the microphone volume on Konftel 50/60W
Adjust the microphone volume on Konftel
50/60W if required. Please note that Konftel
50/60W must be switched on. or
2 sec
Press and hold the mute button for 2 seconds until the LEDs start to flash and you hear a tone.
Increase the microphone volume using + and reduce it using –.
Adjust the microphone volume one level at a time until the correct level is achieved.
Press the mute button to conclude setting the selected microphone volume.
USe
answering a call
Press the on/off button to switch on Konftel
50/60W.
Answer the call using the communication software in the computer (e.g. Skype ® ).
Making a call
Press the on/off button to switch on Konftel
50/60W.
Make the call using the communication software in the computer (e.g. Skype ® ).
ending a call
End the call at the computer.
Press the on/off button to turn off Konftel
50/60W.
adjusting the speaker volume
or
Increase the speaker volume using + and reduce it using –.
Mute function
Press the mute button to turn off the microphone.
The LEDs change from green/blue to red. The other party cannot hear what you are saying.
Press the mute button again to switch the microphone back on.
tuning the sound manually
Konftel 50/60W adjusts itself automatically when you switch it on to eliminate echo. It also senses changes in the room and continually adapts during the call. If, despite this, you still experience reduced sound quality, Konftel
50/60W can be tuned manually at any time.
Press trim.
A short audible signal is heard.
