MasterForce STB456 Operator's Manual

80V BRUSHLESS STRING
TRIMMER
267-3199
2100194ME
STB456
OPERATOR’S MANUAL
CAUTION To Reduce The Risk Of Injury, User Must Read
And Understand Operator’s Manual. Save These Instructions For
Future Reference.
TABLE OF CONTENTS
Safety Symbols............................................................................................................ Page 2
Safety Instructions....................................................................................................... Page 3
Overview...................................................................................................................... Page 7
Assembly..................................................................................................................... Page 8
Operation................................................................................................................... Page 11
Maintenance ............................................................................................................. Page 14
Troubleshooting......................................................................................................... Page 15
Notes......................................................................................................................... Page 17
Warranty.................................................................................................................... Page 18
SAFETY SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better
and safer.
Symbol
Name
Designation / Explanation
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watts
Power
min
Minutes
Time
Alternating Current
Type of current
Direcrt Current
Type or a characteristic of current
Class II Construction
Double-insulated construction.
Per Minute
Revolutions, strokes, surface speed, orbits etc.,
per minute
Safety Alert
Precautions that involve your safety.
Read The Operator’s Manual
To reduce the risk of injury user must read and
understand operator’s manual before using this
product.
Eye Protection
Always wear eye protection with side shields
marked to comply with ANSI Z87.1 when
operating this equipment.
Wet Conditions Alert
Do not expose the product to rain or moist
conditions.
Ricochet
Thrown objects can ricochet and result in
personal injury or property damage.
No Blade
Do not install or use any type of blade on a
product or displaying this symbol.
Keep Bystanders Away
Keep all bystanders at least 50 ft. (15m) away.
/min
Page 2
SAFETY INSTRUCTIONS
The purpose of safety symbols is to attract our attention to possible dangers. The safety
symbols, and the explanations with them, deserve your careful attention and understanding.
The symbol warnings do not by themselves eliminate any danger. The instructions and
warnings they give are no substitutes for propper accident prevention measures.
WARNING Be sure to read and understand all safety insructions in this
manual, including all safety alert symbols such as “DANGER”, “WARNING” and
“CAUTION”, before using this power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May be used
in conjuntion with other symbols or pictographs
DANGER
Failure to obey this warning WILL result in death or serious injury
to yourself or to others. Always follow the safety precautions to reduce the risk of fire,
electric shock and personal injury.
WARNING Failure to obey this safety warning CAN result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the risk of
fire, electric shock and personal injury.
CAUTION
Failure to obey this safety warning MAY result in personal injury
to yourself or others or property damage. Always follow the safety precautions to
reduce the risk of fire, electric shock and personal injury.
Page 3
SAFETY INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING (THIS POWER
TOOL)
WARNING Read and
understand all instructions before using
this product. Failure to follow all
instructions listed below may result in
electric shock, fire, and/or serious
personal injury. When using an electrical
appliance, basic precautions should
always be followed, including the
following:
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks that may ignite the dust
or fumes.
• Do not allow children or untrained
individuals to use this unit.
• Don’t expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not handle battery or tool with wet
hands.
• N eve r a l l ow c h i l d r e n to o p e r ate t h e
equipment. Never allow adults to operate
the equipment without proper instruction.
• Always wear safety glasses with side
shields that are marked to comply with
ANSI Z87.1. Everyday glasses have only
impact resistant lenses. They are NOT
safety glasses. Following this rule will
reduce the risk of eye injury. Use face
mask if operation is dusty.
• Don’t use in the rain. Store indoors.
• Do not operate in poor lighting.
• Keep all parts of your body away from any
moving part.
• Prevent unintentional star ting. Ensure
the switch is in the off-position before
connecting to battery pack, picking up
or carrying the appliance. Carrying the
appliance with your finger on the switch or
energizing appliance that have the switch
on invites accidents.
• Do not force tool. Use the correct tool
for your application. The correct tool will
do the job better and safer at the rate for
which it is designed.
• Do not operate the equipment while bare
foot or when wearing sandals or similar
light weight foot wear. Wear protective
footwear that will protect your feet and
improve your footing on slippery surfaces.
• Keep firm footing and balance. Do not
overreach. Overreaching can result in loss
of balance.
• Check Damaged Parts – Before further use
of the appliance, a guard or other part that
is damaged should be carefully checked to
determine that it will operate properly and
perform its intended function.
• Check for alignment of moving par ts,
binding of moving parts, breakage of parts,
mounting and any other condition that
may affect its operation. A guard or other
part that is damaged should, be properly
repaired or replaced by an authorized
service center unless indicated elsewhere
in this manual.
• Keep guards in place and in working order.
• Keep hands and feet away from cutting
area.
• Do not allow to be used as a toy. Close
attention is necessary when used by or
near children.
• Do not use tool if switch does not turn it on
or off. Any tool that cannot be controlled
with the switch is dangerous and must be
repaired.
• Keep all bystanders, children, and pets at
least 50 ft. away.
• Do not operate this unit when you are tired,
ill, or under the influence of alcohol, drugs,
or medication.
• Use only Masterforce Batteries: BAB726 or
other BAB series.
• Use only Masterforce Charger: CAB809 or
other CAB ceries.
• Do not put any object into openings. Do not
use with any opening blocked; keep openings
free.
• Check the work area before each use.
Remove all objects such as rocks, broken
glass, nails, wire, or string which can be
thrown or become entangled in the machine.
• Use only identical manufacturer’s replacement
Page 4
SAFETY INSTRUCTIONS
parts and accessories. Use of any other
parts may create a hazard or cause product
damage.
• Do not charge battery in the rain, or damp or
wet locations. Following this rule will reduce
the risk of electric shock.
• For household use only.
• Battery tools do not have to be plugged into
an electrical outlet; therefore, they are always
in operating condition. Be aware of possible
hazards when not using your battery tool or
when changing accessories. Following this
rule will reduce the risk of electric shock, fire,
or serious personal injury.
• Remove or disconnect bat ter y before
servicing, cleaning or removing material from
the gardening appliance.
• Use appliance only with specially designated
battery packs. Use of any other battery packs
may create a risk of injury and fire.
• Store idle appliances - When not in use, the
string trimmer should be stored indoors in a
dry, locked place out of the reach of children.
• Do not dispose of batteries in a fire. The cell
may explode. Check with local codes for
possible special disposal instructions.
• Do not open or mutilate the batteries.
Released electrolyte is corrosive and may
cause damages to the eyes or skin. It may be
toxic if swallowed.
• Do not place battery tools or their batteries
near fire or heat. This will reduce the risk of
explosion and possibly injury.
• Batteries can explode in the presence of
a source of ignition, such as pilot light. To
reduce the risk of serious personal injury,
never use any cordless product in the
presence of an open flame. An exploded
battery can propel debris and chemicals. If
exposed, flush with water immediately.
• Do not crush, drop or damage battery.
Do noy use a battery or charger that has
been dropped or received a sharp blow. A
damaged battery is subject to explosion.
Properly dispose of a dropped or damaged
battery immediately.
• Exercise care in handling batteries in order
not to short the battery with conducting
materials such as rings, bracelets, and keys.
The battery or conductor may overheat and
cause burns.
• Under ex treme usage or temperature
conditions, battery leakage may occur.
If liquid comes in contact with your skin,
wash immediately with soap and water,
Page 5
then neutralize with lemon juice or vinegar.
If liquid gets into your eyes, flush them with
clean water for at least 10 minutes, then seek
immediate medical attention. Following this
rule will reduce the risk of serious personal
injury.
• If the charger power supply cord is damaged,
it must be replaced only by the manufacturer
or by an authorized service center to avoid
risk.
• Do not point the string trimmer in the direction
of people or pets.
• When not in use, the string trimmer should be
stored indoors in a dry, locked up place out of
the reach of children.
• Maintain tool with care. Keep all vents and
openings clean and clear of debris. Follow
instructions for proper maintenance. Do not
attempt to clear clogs from tool without first
switching it off and removing the battery.
• Dres s Pro per ly – D o not wear lo ose
clothing or jewelry. They can be caught in
moving parts. Use of rubber gloves and
substantial footwear is recommended
when working outdoors. Wear protective
hair covering to contain long hair.
• Use the Correct Appliance – Do not use
appliance for any job except that for which
it is intended.
• When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws or other
small metal objec ts that c an make a
connection from one terminal to another.
• Shorting the battery terminals together
may cause burns or a fire.
• Do not expose a battery pack or appliance
to fire or excessive temperature. Exposure
to fire or temperature above 265°F may
cause explosion.
• Follow all charging instructions and do
not charge the battery pack or appliance
outside of the temperature range specified
in the instructions. Charging improperly or
at temperatures outside of the specified
r a n g e m ay d a m a g e t h e b a t t e r y a n d
increase the risk of fire.
• Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.
• Do not modif y or attempt to repair
the appliance or the batter y pack (as
applicable) except as indicated in the
SAFETY INSTRUCTIONS
instructions for use and care.
PROPOSITION 65
This product contains a chemical known to
the state of California to cause cancer, birth
defects or other reproductive harm. Some dust
created by power sanding, sawing, grinding,
drilling, and other construction activities
contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement
and other masonry products;
• Arsenic and chromium from chemically
treated lumber.
Your risk of exposure to these chemicals
varies depending on how often you do this
type of work. To reduce your exposure to these
chemicals, work in a well-ventilated area, and
work with approved safety equipment, such as
dust masks that are specially designed to filter
out microscopic particles.
CHILD SAFETY
Tragic accidents can occur if the operator is
not aware of the presence of children.
• Ke e p c h i l d r e n o u t o f t h e wo r k i n g
area and under the watchful care of a
responsible adult.
• Do not allow children under the age
of 14 to operate this trimmer. Children
who are 14 years of age or older must
read and understand the operating
instructions and safety rules in this
manual and must be trained and
supervised by a parent.
• Stay alert and turn the trimmer off if a
child or any other person enters the
working area.
• Look behind and down for small
c hil dre n b efore a n d w hil e c u t t i n g
backwards.
• Use extreme care when approaching
blind corners, doorways, shrubs, trees,
or other objects that may obscure your
view of a child who may run into the
path of the trimmer.
SAVE THESE INSTRUCTIONS
Page 6
OVERVIEW
SPECIFICATIONS
Type
Cordless, battery operated
Motor
80V Brushless
String Cutting Width
14/16 in.
String Diameter
0.08" (2.0 mm)
Speed
5000/5500 RPM
Weight (Without Battery)
10.6 lbs (4.8 kg)
The recommended ambient temperature range:
Item
Temperature
String trimmer storage emperature range
-4°F (-20°C) - 158°F (70°C)
String trimmer operation temperature range
-4°F (-20°C) - 104°F (40°C)
Battery charging temperature range
39°F (4°C) - 104°F (40°C)
Charger operation temperature range
39°F (4°C) - 113°F (45°C)
1 year: 32°F (0°C) - 73°F (23°C)
Battery storage temperature range
3 months: 32°F (0°C) - 113°F (45°C)
1 months: 32°F (0°C) - 140°F (60°C)
Battery discharging temperature range
Page 7
6.8°F (-14°C) - 113°F (45°C)
ASSEMBLY
UNPACKING
This product requires assembly.
• Carefully remove the product and any
accessories from the box. Make sure that
all items listed in the package contents
section are included.
• Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
• Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the product.
• If any parts are damaged or missing, please
call 1-844-MSTR4CE (844-678-7423) for
assistance.
GUARD
ATTACHMENT
Read and understand entire Operator’s
Manual for each optional attachment used on
this power head and follow all warnings and
instructions. Failure
WARNING to follow all instructions may result in
electric shock, fire and/or serious personal
injury.
Never install, remove, or adjust any attachment while power head is running. Failure to
stop the motor can cause serious personal
injury. Never operate power head without an
attachment.
To install the attachment to the power
head
This 80-Volt powerhead is compatible with
universal gas attachments.
WARNING
To prevent accidental
starting that could cause serious personal
injury, always remove the battery pack from
the tool when assembling parts.
1. Remove the battery.
2. Invert the string trimmer to access the
trimmer head.
3. Using a Phillips head screwdriver, remove
the pre-installed screws from the trimmer
head.
4. Place the guard on to the trimmer head and
slide the guard onto the head by following
the track on the head
5. Align the screw holes on the guard with the
screw holes on the trimmer head.
6. Insert the screws into the trimmer head,
fastening the guard in place.
NOTE: When using string trimmer attachments, use only .080 in. diameter line.
Page 8
ASSEMBLY
The attachment connects to the power head
by means of a coupler device.
1. Loosen the attachment knob on the
coupler.
2. Push in the release button located on the
attachment shaft. Align the button with the
guide recess on the power head coupler
and slide the two shafts together. Rotate the
attachment shaft until the button locks into
the positioning hole.
LINE TRIMMER CUT-OFF BLADE
The trimmer is equipped with a line trimming
cut-off blade on the guard. Replace the string
when trimming efficiency diminishes. This will
maintain best performance.
NOTE: If the button does not release
completely in the positioning hole, the shafts
are not locked into place. Slightly rotate from
side to side until the button is locked into
place.
3. Tighten the attachment knob securely.
To remove the attachment to the power
head
For removing or changing the attachment:
1. Stop the power head.
2. Remove the battery from the power head.
3. Loosen the attachment knob.
4. Push in the release button and twist the
shafts to remove and seperate ends.
AUXILIARY HANDLE
1. Press the auxiliary handle onto the power
head shaft so that the handle is angled
toward the rear handle that allows for
comfortable operation.
2. Slide the bolts through the holes in
the auxiliary handle, and tighten them
securely with a Phillips Head screwdriver
(not included).
Page 9
Adjusting the cutting swath
ASSEMBLY
The trimmer is currently set at a 14 in. cutting
swath. To adjust to a cutting swath of 16 in.:
1. Remove the battery from the string
trimmer.
2. Remove both screws on the cut-off blade
with a Phillips screwdriver (not included).
3. Rotate the cut-off blade 180°.
4. Replace both screws in the cut-off blade.
Note: Set the cut-off blade to 14 in. for
greater runtime. Set the cut-off blade to 16
in. for greater cutting area.
THE BATTERY PACK
• If the battery pack
or charger is damaged, replace the battery pack or the charger.
• Stop the machine and wait until the motor
stops before you install or remove the battery
pack.
• Read, know, and do the instructions in the
battery and charger manual.
WARNING
FIG. 7
HARNESS
1
To install the battery pack
1. Align the lift ribs on the battery pack with
the grooves in the battery compartment.
2. Push the battery pack into the battery
compartment until the battery pack locks
into place.
3. When you hear a click, the battery pack is
installed.
To remove the battery pack
1. Rotate the harness holder to the upward
position.
2. Hook a shoulder harness to the harness
holder.
1. Push and hold the battery release button
(1).
2. Remove the battery pack from the
machine.
Page 10
OPERATION
WARNING
Read and understand entire Operator's Manual for each
optional attachment used on this power
head and follow all warnings and instructions.
Failure to follow all instructions may result in
electric shock, fire and/or serious personal
injury.
Do not allow familiarity with this product to
make you careless. Remember that a careless fraction of a second is sufficient to inflict
serious injury.
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious
personal injury.
This string trimmer is not meant to be used
with brush cutter attachments. Use of a brush
cutter attachment could cause serious personal injuries or property damage.
OPERATION TIPS
• Hold the power head with your right hand
on the rear handle and your left hand on
the auxiliary handle. Keep a firm grip with
both hands while in operation. Power head
should be held at a comfortable position
with the rear handle about hip height.
• Always operate power head at full throttle.
If debris becomes wrapped around the
attachment, release the switch trigger, and
remove the debris.
LOCK-OUT BUTTON
The lock-out button reduces the possibility
of accidental starting. The lock-out button is
located on the handle above the switch trigger. The lock-out button must be depressed
before you pull the switch trigger. The lock
resets each time the trigger is released.
START / STOP THE TRIMMER
WARNING
Any contact with the
attachment cutting head can result in burns
and/or other serious personal injury.
Read the safety information for safe operation when using a blade attachment and refer
to the safety rules and instructions in your
attachment manual. Never use a brush cutter
attachment with this electric power head. Improper operation of a blade or any attachment
could result in serious injury.
1. Ensure a fully charged battery is installed
into the string trimmer.
2. To start the string trimmer, press and hold
the safety lock button (1) and squeeze the
switch trigger (2).
3. To stop the string trimmer, release switch
trigger to stop.
Page 11
OPERATION
INSTALL STRING IN THE STRING
HEAD
REMOVE THE OLD TRIMMER
LINE
1. Firmly press in the tabs on each side of the
spool cover.
2. Remove the spool cover from the spool
housing.
3. Remove any excess trimmer line or
obstructions from the spool.
4. Use a clean cloth to wipe away any debris
from the spool, spool cover, or spool
housing.
5. Align the tabs of the spool cover with the
posts on the spool housing. Push the spool
cover until the tabs securely snap into
the posts.
1. Line up the slots on the spool cap with the
slots on the string head.
2. Insert line through the string head hole.
Push line until it exits the opposite string
head hole.
3. Pull the line through until there is an equal
amount of line on each side.
4. Turn the spool cap clock-wise to begin
winding the string into the string head. Leave
approximately 5 inches of string protruding
out of each side of the head.
It is recommended that 0.080” line Diameter
be used for this string head.
Note: Do not put more than 15 feet of line in
at a time.
Page 12
OPERATION
REMOVE THE OLD TRIMMER
LINE
1. Line up the spacer hole up with the hole in
the gear box.
2. Place a small screw driver or metal rod (Not
included) in the spacer hole.
3. Rotate the head clockwise to loosen and
remove.
4. Reverse steps 1-3 to reinstall the same
string head.
Note: If you put a different model string head
on this unit please follow the manufacturer’s
instructions to install that head.
Page 13
CUTTING TIPS
• Keep the trimmer tilted toward the area
being cut; this is the best cutting area.
• The trimmer cuts when passing the unit
from right to left. This will avoid throwing
debris at the operator. Avoid cutting in the
dangerous area shown in figure 6.
• Use the tip of string to do the cutting; do not
force string head into uncut grass.
• Wire and picket fences cause extra string
wear and breakage. Stone and brick walls,
curbs, and wood may wear string rapidly.
• Avoid trees and shrubs. Tree bark, wood
moldings, siding, and fence posts can
easily be damaged by the string.
MAINTENANCE
WARNING
When servicing,
use only identical replacement parts. Use
of any other parts may create a hazard or
cause product damage.
Before inspecting, cleaning, or servicing the
machine, shut off motor, wait for all moving
parts to stop, and disconnect power supply.
Failure to follow these instructions can
result in serious personal injury or property
damage.
GENERAL MAINTENANCE
STORING THE POWER HEAD
• Clean all foreign material from the product.
• Store it in a well-ventilated place that is
inaccessible to children.
• Keep away from corrosive agents such as
garden chemicals and de-icing salts.
WARNING
Do not store the
string trimmer in sunlight, in an excessively
warm place, or near a furnace. The battery
life will be shortened.
Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust,
lubricant, grease, etc.
WARNING
Do not at any time
let brake fluids, gasoline, petroleum-based
products, penetrating lubricants, etc.,
come in contact with plastic parts.
Chemicals can damage, weaken or destroy
plastic which may result in serious personal
injury.
You can often make adjustments and repairs
described here. For other repairs, have
the power head serviced by an authorized
service dealer.
CLEANING THE POWER HEAD
• Stop the motor and remove the battery.
• Clean dirt and debris from the power head
using a damp cloth with a mild detergent.
Note: Do not use any strong detergents on
the plastic housing or the handle. They can
be damaged by certain aromatic oils such
as pine and lemon, and by solvents such as
kerosene.
Page 14
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The machine does
not start
when you push the
trigger.
No electrical contact
between the machine
and the battery pack.
1. Remove battery pack.
2. Check contact and install the battery pack
again.
The battery pack is
depleted.
Charge the battery pack.
The lock-out button
and trigger are not
pushed at the same
time.
1. Push the lock-out button and hold it.
2. Pull the trigger to start the machine.
The guard is not
attached to the
machine.
Remove the battery pack and attach the guard
to the machine.
Heavy cutting line is
used.
Use only with the nylon cutting line of 0.095" /
0.080" (2.4 mm / 2.0 mm) diameter.
The grass winds
around the motor
shaft or the trimmer
head.
1. Stop the machine.
2. Remove the battery pack.
3. Remove the grass from the motor shaft and
trimmer
head.
The motor is
overloaded.
1. Remove the trimmer head from the grass.
2. The motor will recover to work as soon as
the load is removed.
3. When you cut, move the trimmer head in and
out of the grass to be cut and remove no more
than 8" in pass.
The battery pack or
machine is too hot.
1. Cool the battery pack until its function returns
to normal.
2. Cool the machine for approximately 10
minutes.
The battery pack is
disconnected from
the tool.
Install the battery pack again.
The battery pack is
depleted.
Charge the battery pack.
Not enough line on
spool.
Install more line.
Lines are worn too
short.
Advance the cutting line.
Lines are tangled on
spool.
1. Remove the lines from the spool.
2. Wind the lines.
The machine stops
when you cut.
The line does not
advance.
Page 15
TROUBLESHOOTING
The line keeps
breaking.
The machine is used
incorrectly.
1. Cut with the tip of the line, avoid stones,
walls and other hard objects.
2. Advance the cutting line regularly to keep full
cutting width.
The grass winds
around the trimmer
head and motor
housing.
Cut tall grass at
ground level.
1. Cut tall grass from the top down.
2. Remove no more than 8" in each pass to
prevent wrapping.
The line does not cut
well.
The cut-off blade
becomes dull.
Sharpen the cut-off blade with a file or replace
it.
Vibration increases
obviously.
The line is worn down
at one side and not
advanced in time.
Make sure that the line on both sides is normal.
Advance the line.
Page 16
EXPLODED VIEW
1
2
3
4
6
5
ITEM NO.
PART NO.
DESCRIPTION
QTY
1
RB34130334V
Auxiliary assembly
1
2
RB37902144
Shoulder strap
1
3
R0201682-00
Coupler bolt
1
4
R0201683-00
Coupler knob
1
5
R0201684-00
Guard assembly
1
6
R0201685-00
Trimmer head assembly
1
Page 17
80V BRUSHLESS STRING TRIMMER
WARRANTY
4-YEAR LIMITED WARRANTY
This MASTERFORCE™ brand power tool carries our famous No Hassle 4-Year Limited
Warranty to the original purchaser. If, during normal use, this MASTERFORCE™ power
tool breaks or fails due to a defect in material or workmanship within four (4) years from
the date of original purchase, simply bring the tool with the original sales receipt back
to your nearest MENARDS® retail store. At its discretion, MASTERFORCE™ agrees
to have the tool or any defective part(s) repaired or replaced with the same or similar
MASTERFORCE™ product or part free of charge, within the stated warranty period,
when returned by the original purchaser with original sales receipt. Not withstanding the
foregoing, this limited warranty does not cover any damage that has resulted from abuse
or misuse of the Merchandise. This warranty: (1) excludes expendable parts including
but not limited to blades, brushes, belts, bits, light bulbs, and/or batteries; (2) shall be
void if this tool is used for commercial and/or rental purposes; and (3) does not cover any
losses, injuries to persons/property or costs. This warranty does give you specific legal
rights and you may have other rights, which vary from state to state. Be careful, tools
are dangerous if improperly used or maintained. Seller’s employees are not qualified
to advise you on the use of this merchandise. Any oral representation(s) made will not
be binding on seller or its employees. The rights under this limited warranty are to the
original purchaser of the merchandise and may not be transferred to any subsequent
owner. This limited warranty is in lieu of all warranties, expressed or implied including
warranties or merchantability and fitness for a particular purpose. Seller shall not be
liable for any special, incidental, or consequential damages. The sole exclusive remedy
against the seller will be for the replacement of any defects as provided herein, as long
as the seller is willing or able to replace this product or is willing to refund the purchase
price as provided above. For insurance purposes seller is not allowed to demonstrate
any of these power tools for you.
For questions / comments, technical assistance or repair parts Please call toll free at: 1-844-678-7423 (M-F 8am - 6pm)
SAVE YOUR RECEIPTS
THIS WARRANTY IS VOID WITHOUT THEM
Page 18
© 2019 Menard, Inc., Eau Claire, WI 54703
Page 19
12/2019
">