Vertical Mounting Bar
Extensions
Instruction Manual
v 1.0.0
8-14-23
How to Attach The Vertical Mounting Bar Extensions
The Vertical Mounting Bar Extensions shown in the following images are the L-65 Vertical Mounting Bar Extensions. The following steps
are the same for the L-65, L-77i, and L-85 Vertical Mounting Bar Extensions.
These steps are designed to be used in conjunction with the TV Mounting Instructions found within the Installation
Manual for your Lift System.
2
1. Slide each Vertical Mounting Bar Extension onto the front of each Vertical Mounting Bar.
Note: The Extensions can be used on the top or the bottom of the Vertical Mounting Bar depending on your TV’s VESA Pattern.
3
Vertical Mounting Bar Extension
VESA Mounting Holes
Vertical Mounting Bar
2. Test fit the Vertical Mounting Bar Extensions with the Vertical Mounting Bars on the back of your TV.
4
For L-85 series
Ensure two Pems are used
3. Attach the Vertical Mounting Bar Extensions and Vertical Mounting Bars to the back of your TV using the appropriate TV Mounting Hardware.
Note: One screw will always fasten through both of the Vertical Mounting Bar and the Vertical Mounting Bar Extension, while the other will fasten through the Vertical Mounting
Bar only.
Note: For L-85 Series, ensure at least (2) M6 x 6 BHMS Screws secure each Vertical Mounting Bar Extension to the Vertical Mounting Bar.
5
4. Hang your Vertical Mounting Bars onto your Screen Backplate.
6
Intentionally left blank
7
1 - 888 - 981 - 9919
www.nexus21.com
">
