final AG-TWS04K Bluetooth Earphone Instruction manual

Final AG-TWS04K Bluetooth Earphone: Experience true wireless freedom with these Bluetooth 5.0 earbuds. Enjoy seamless music playback, crystal-clear calls, and intuitive controls. The charging case provides extended playtime, and automatic power on/off adds convenience. Pair easily with your smartphone for effortless listening.

PDF

Document

Instruction manual for Bluetooth earphone
Model：AG-TWS04K
Thanks for purchasing Final TWS04K Bluetooth 5.0 True Wireless Earbuds. Please carefully
read this instruction manual before using your new Final EVA earbuds.
Packing list
Product Overview
Charging
Case Charging
White LED
Charging
ON
Fully
All LED on
Charged
Power On
Earbuds Charging
Orange LED
Charging
ON
Fully
Orange LED
charged
Off
Before using the Bluetooth earbud, please remove the plastic film from the back of the earbud,
you could power on the earbud as follow steps:
1. To manually turn the earbuds on, press the MFB button lightly to boo up
2. The earbuds will power on automatically when removed from the charging case, if the
charging case has a sufficient charge. (The white indicator light will blink for one second to
indicate that the earbuds are in a “power on” state.)
Power off
A.To turn off the earbuds, press the MFB button for 3 seconds until you hear a “beep” sound
twice, you will hear “power off” after release.
B. If the charging case has a sufficient charge, the earbuds will automatically turn off when placed
in the charging case.
How to Pair
Pairing Procedure
The first time you use your earbuds with your smartphone, you will need to pair them with your
smartphone. Once paired, they will connect automatically each time they are booted up.
Pairing
1. Remove your two earbuds from the charging case. They will power on automatically, and will
enter pairing mode, with orange and white indicator lights flashing alternately.
2. Enable Bluetooth on your smartphone, and search for “EVATW01_L/R) to initiate the pairing.
3. After pairing, the connection interface of the second earbud should appear on your
smartphone. Click it to confirm and all setting will be completed.
Pairing a new device
1. Remove your two earbuds from the charging case. They will power on automatically and
connect to your current device.
2. Disconnect the earbuds from your last connected smartphone by “disconnecting” or
“forgetting” or deleting “EVATW01_L/ R) from your smartphone’s Bluetooth device list.
3. Once disconnected, double click the MFB button to enter pairing mode, with orange and
white indicator lights flashing alternately.
4. Enable Bluetooth on your new device, and search for “EVATW01_L/R” in available Bluetooth
device. Once found, click “EVATW01_L/R” to initiate the pairing. After pairing, the connection
interface on the second earbud should appear on your smartphone. Click it to confirm and all
setting will be completed.
Button Operation
Model
Music
Phone
Function
Play
Pause
Next Track
Previous Track
Answer call
Hang Up
L
R
Single click
Single click
long press till hear &quot;beep&quot;
long press till hear &quot;beep&quot;Single click
Single Click or Put in Charing Case
Reject Call
Enable
Siri
Disable
Volume
Up +
Down-
Double Click
Double Click (in standby mode, the earbud connect with
phone)
Double Click (in standby mode, the earbud connect with
phone)
Double Click
ˉ
Double Click
ˉ
Declarations and Warning
Declarations and Warnings Disconnect previous devices before pairing a new device.
WARNING!
Long-term exposure to high noise volumes may cause permanent hearing loss.
Do not use the EVATW01 earbuds in locations prohibiting the use of electronic equipment.
Consult your physician prior to using your EVATW01 earbuds if you have a pacemaker or other
electrical medical device.
This package contains small parts, which may pose a hazard to small children.
Do not disassemble the EVATW01 earbuds as it contains lithium batteries, and disassembly
could result in electric shock or fire or serious injury.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
">

Hello! I am an AI chatbot specifically trained to assist you with the Final AG-TWS04K Bluetooth Earphone Instruction manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Bluetooth 5.0
True Wireless
Intuitive Controls
Charging Case
Automatic Power On/Off

Frequently asked questions

Press the MFB button lightly, or they'll power on automatically when removed from the charging case if it's sufficiently charged.

Remove earbuds from the case; they'll enter pairing mode (orange and white lights flashing). Enable Bluetooth on your phone, search for "EVATW01_L/R", and connect.

Single click the MFB button on either earbud.

Double click the MFB button on the right earbud to increase volume, and double click the left earbud to decrease volume.

Press and hold the MFB button for 3 seconds until you hear a double beep. They'll also automatically turn off when placed in the charging case (if sufficiently charged).