LINCO 4332005182 Lincostore Studio Lighting 3 Point Light Backdrop Background Support User Manual

LINCO INC. CIRRUS™ & PHENO SQUARE INSTRUCTIONS
(LK337 & LK339 & AM110)
x1
x3
x2
Softboxes
Backdrop Stands
Crossbar Set
x5
Clamps
x3
Light Heads
x3
Light Stands
x2
x3
Backdrops
Bulbs
x1
x1
Please call 562-404-0593 or email [email protected]
if you have any questions.
Our Business Hours are 08:00-16:30 PST Monday-Friday.
x1
Sand Bag
Carrying bag
Boom Arm
1. Cirrus™ and Pheno Square Reflector/Softbox Installation
2. Pheno Square and Cirrus™ Installation
- Secure attached Pheno Square and Cirrus™ onto Lightstand Stud.
-Screw in bulbs into Ceramic Sockets on Cirrus™
(Cirrus™ can ONLY accept LINCOInc® LED and Fluorescent Bulbs.)
-Cover Pheno Square with diffuser. (Optional)
-Repeat Step 3 for remaining Cirrus™.
3. Boom Stand Installation
-Move Boom Clamp to a center position along Boom Arm.
-Attach Boom Arm onto lightstand by securing Boom
Clamp onto Lightstand Stud.
-Attach Sand Bag onto opposite end of Boom Stud and add
counterweight.
-Secure attached Cirrus™ and Pheno Square onto Boom Arm.
-Screw in bulb into Ceramic Socket on Cirrus™
-Cover Pheno Square Reflector with diffuser for Softbox. (Optional)
4. Background Support Installation
- 5ft. Width – Use A+C Rods (10'x5')
-7.5 ft Width – Use A+B+C Rods
-10 ft Width – Use A+B+B+C Rods (5'x10')
(Attach Clamps onto Crossbar before finalizing
Installation)
A
B
B
C
5 . Backdrop Muslin Installation
- Using attached Muslin Clamps or Backdrop Holders, attach
each corner of Backdrop Muslin.
-Attach the remaining middle Muslin Clamps onto Backdrop Muslins.
(Note: This step only needs to be done once. For removal,
muslin clamps stay on muslin for easy re-installation.)
(To purchase more Muslin Clamps or Backdrop Holders,please
contact us at 562-404-0493 or email [email protected]).
A
B
B
C
2 Crossbars
3 Crossbars
4 Crossbars
">