LINCO Photography Studio Lighting Backdrop Photography Background Muslin 2 Set Boom Stand Photo Light Kit User Manual

LINCO CIRRUS™, MORNING GLORY™ & PHENO SQUARE™ INSTRUCTIONS
(AM038)
x2
x1
x4
Softboxes
Panel
Backdrop Holders
x2
x4
x2
Light Stands
Sand Bags
Umbrellas
x2
x4
Boom Arms
Light Heads
x1
Please call 562-404-0593 or email [email protected]
if you have any questions.
Our Business Hours are 08:00-16:30 PST Monday-Friday.
Backdrop
x4
Bulbs
1. Morning Glory™ Softbox and Cirrus™ Installation
2. Cirrus™ and Pheno Square™ Reflector/Softbox Installation
- Secure attached Pheno Square™ and Cirrus™ onto Lightstand Stud.
-Screw in bulb into Ceramic Socket on Cirrus™
(Cirrus™ can ONLY accept Linco Inc.(R) LED and Fluorescent Bulbs.)
-Cover Pheno Square™ Reflector with diffuser for Softbox. (Optional)
-Repeat Step 1&2 for remaining Cirrus™.
3. Boom Stand Installation
-Move Boom Clamp to a center position along Boom Arm.
-Attach Boom Arm onto lightstand by securing Boom Clamp onto
Lightstand Stud.
-Attach Sand Bag onto opposite end of Boom Stud and add
counterweight.
-Secure attached Cirrus™ and Morning Glory™ onto Boom Arm.
-Screw in bulb into Ceramic Socket on Cirrus™
-Cover Morning Glory™ with diffuser for Softbox. (Optional)
4. Panel Stand Installation
- Attach Boom onto Lightstand
Stud with counterweight
-Secure Reflective Panel with Upper
and Middle Locking Mechanisms
5. Backdrop Muslin Installation
- Using attached Muslin Clamps or Backdrop
Holders, attach each corner of Backdrop Muslin.
-Attach the remaining middle Muslin Clamps
onto Backdrop Muslins.
(Note: This step only needs to be done once.
For removal, muslin clamps stay on muslin for
easy re-installation.)
(To purchase more Muslin Clamps or Backdrop
Holders, please contact us at 562-404-0493 or email [email protected]).
P37
">