CPS3003-SA



3

rd

Gen. Intel® Core™ i7 3U CPCI-S.0 CPU BOARD



high-performance cpu



high-end graphics



high-speed connectivity

CPS3003-SA

3

rd

Gen. Intel® Core™ i7 3U CPCI-S.0 CPU BOARD

CompactPCI® Serial, adopted by the PICMG® consortium in 2011, describes a new base standard. The CompactPCI® Serial standard introduces a completely new connector that enables a higher signal density and supports even higher transmission frequencies of up to 12 Gb/s. While being compliant to the proven CompactPCI® mechanics (according IEC 1101), CompactPCI® Serial supports modern point-to-point connections such as PCI Express®, SATA,

Ethernet and USB on the backplane.

Powerful CPU and Platform Controller Hub

The CPS3003-SA is a highly integrated 3U CPCI-S.0 CPU board based on Intel®’s 3rd Generation Core™ i7 in combination with the mobile Intel® QM77 Express Chipset. The CPU board comes with a multi-core CPU package scalable from the dual-core ULV 1.7 GHz

Core™ i7-3517UE up to the quad-core 2.1 GHz i7-3612QE processor.

The powerful PCH Intel® QM77 provides a variety of interfaces either routed to front, onboard or the CompactPCI® Serial connectors. Memory-demanding applications can make use of up to 16GB, 1600MHz DDR3 SDRAM with Error Checking and Correction

(ECC). As another security feature, the CPS3003-SA provides a

Trusted Platform Module (TPM) which off ers hardware-based encryption mechanisms to create, seal or store keys, passwords and other important data. For graphics intensive applications, the

CPS3003-SA off ers an excellent graphics performance with integrated DirectX®11, OpenGL 3.1 and OpenCL 1.1 support as well as three independent graphics outputs.

Variety of Interfaces and Options

The CPS3003-SA comes with a comprehensive I/O feature set supporting the latest high-speed interfaces such as USB 3.0, SATA

6Gb/s or PCI Express® 3.0. Communication interfaces available on the front panel are two DisplayPort, two USB 2.0 and two Gigabit

Ethernet ports. Serial interfaces available on the CompactPCI®

Serial connectors P1 to P5 are eight USB ports, four SATA interfaces and 17x PCI Express® links. Additional interfaces available on the

P6 CompactPCI® Serial rear I/O connector are two Gigabit Ethernet interfaces, two USB ports, one DisplayPort and two serial ports. By adding one of the four extension modules – Smart Extension

Module, SATA Flash Module, CPS3003-EXTIO or CPS3003-BRIDGE

- the CPS3003-SA’s I/O and storage capabilities will be further extended.

Long-Term Availability

Investing in a new project is always a challenge and risky. Extending the lifetime of an application to the possible maximum is therefore a critical issue to save the development investments. Delivering a stable product based on Intel®‘s embedded product line, the

CPS3003-SA ensures long-term availability. This eliminates the risk of unplanned design changes and unexpected expensive application modifi cation. While minimizing deployment risks by providing a broad range of software support, the CPS3003-SA eases the process of product integration and maximizes your competitive advantage to meet your time-to-market window.

/ / 2 www.kontron.com

CPS3003-SA

TECHNICAL INFORMATION

PROCESSOR

MEMORY

ONBOARD CONTROLLER

FRONT INTERFACES 4HP

ONBOARD INTERFACES

COMPACTPCI® SERIAL

INTERFACE

SYSTEM MEMORY

BOOT FLASH (UEFI)

EEPROM

SATA NAND FLASH

HDD

CFAST

PLATFORM CONTROLLER HUB

GRAPHICS

GIGABIT ETHERNET

UART

WATCHDOG

RTC

TRUSTED PLATFORM MODULE

(TPM)

VGA

USB

ETHERNET

LED’S

HIGH-SPEED I/O EXTENSION

CONNECTOR

SATA EXTENSION CONNECTOR

3rd Generation Intel® Core™ i7 processor (22nm technology):

- i7-3612QE: Quad-Core 2.1 GHz, SV, 6MB L3 cache (shared instruction/data cache, shared among all cores)

- i7-3555LE: Dual-Core 2.5 GHz, LV, 4MB L3 cache (shared instruction/data cache, shared among all cores)

- i7-3517UE: Dual-Core 1.7 GHz, ULV, 4MB L3 cache (shared instruction/data cache, shared among all cores)

All boards are passive cooled with a heatsink in 4HP height

Forced air cooling at specifi c fl ow rate is required depending on the processor version

Up to 16GB dual-channel DDR3 SDRAM running at 1600 MHz, with ECC, via two SODIMM sockets

Two redundant 8 MB SPI boot fl ashes with fail-over functionality

Serial EEPROM (24LC64) 64 Kbit for storing uEFI BIOS settings and serial number

Up to 32GB SLC NAND Flash on a dedicated SATA NAND Flash module;

The SATA NAND Flash option is only available on a 4HP CPS3003-SA

Onboard 2.5” SATA SSD/HDD installation via CP3003-HDD extension, optionally available with two SSD/HDD

Onboard CFast installation via 8HP extension

Mobile Intel® QM77 Platform Controller Hub featuring:

- USB host interface with ten USB 2.0 and four USB 3.0 ports

(nine USB 2.0 ports and four USB 3.0 are used on the CPS3003-SA)

- SATA host controller with four SATA 3Gb/s and two SATA 6Gb/s ports with RAID 0/1/5/10 support

- Eight x1 PCI Express® 2.0 ports operating at 5.0 GT/s

- High-Defi nition Audio Interface

High-performance 3D graphics controller integrated in the processor:

- Support for up to three independent graphics outputs

- Supports digital display resolutions up to 2560 x 1600 pixels @ 60 Hz

- Dynamic Video Memory Technology (DVMT)

Two 1000BASE-T interfaces, both front/rear switchable with WOL

(Wake-on-LAN) support, Intel® I210-IT Ethernet controller

XR16L2750IM-F, dual UART, 16C550-compatible

FPGA-based, timeout ranging from 125ms to 4096s programmable in

16 steps, IRQ, Reset, dual-stage confi guration

Integrated in PCH, with 256 Byte CMOS RAM

Atmel AT97SC3204 TPM 1.2 controller

2x 20-pin DisplayPort connectors, DVI/HDMI/VGA capable through cable adapter

2x USB 2.0 ports, 4-pin standard USB connectors

2x RJ-45 with integrated LEDs (ACT, SPEED)

7x LEDs: 4x POST Code or General Purpose, WD, TH, Hot Swap

One 60-pin high-speed connector holding:

- PCIe x1

- One SATA 3Gb/s

- One 3.0

- COMA (TTL)

- Reset

One 18-pin connector holding one SATA port for the SATA Flash module

- Compliant with PICMG® CPCI-S.0 R 1.0 CompactPCI® Serial Specifi cation

- The CPS3003-SA routes the following interfaces via the P1 to P5 connectors to the backplane:

- One PCIe link x8, up to 8GT/s (Fat Pipe)

- One PCIe link x4, up to 8GT/s (Fat Pipe)

- Five PCIe links x1, up to 5GT/s

- Four SATA ports (Two SATA 3Gb/s and two SATA 6Gb/s)

- Two USB 3.0 ports

- Six USB 2.0 ports

- 12 V power supply

- Hot swap capability

- Capability of operation both in system slot and in peripheral slot: When installed in a peripheral slot, all interfaces except for the Ethernet interfaces and rear I/O interfaces are isolated from the CompactPCI® Serial interface www.kontron.com

/ / 3

TECHNICAL INFORMATION (CONTINUED)

COMPACTPCI® SERIAL REAR I/O

SUPERVISORY FUNCTIONS

SOFTWARE SUPPORT

COMPLIANCY

GENERAL

POWER CONSUMPTION

ENVIRONMENTAL

DIMENSIONS

WEIGHT

MTBF

OPERATING TEMPERATURE

STORAGE TEMPERATURE

CLIMATIC HUMIDITY

The P6 connector holds:

- Two Gigabit Ethernet ports without LED signals, according to

CPCI-S.0 specifi cation

Additonally the following interfaces are available for rear I/O connectivity:

- One DisplayPort

- One USB 3.0 port

- One USB 2.0 port

- Two COM ports (LVTTL signal level)

- Eight GPIOs (LVTTL signal level)

- System write protect signal

Watchdog, software confi gurable, 125ms to 4096s in 16 steps, generates IRQ or hardware reset or dual-stage confi guration

- AMI uEFI, setup console redirection to serial port (VT100 mode) with

CMOS setup access, EFI Shell support, board confi guration via Shell, diskless, keyboardless, videoless operation

- LAN boot support

- Board identifi cation number accessible via EEPROM

- Support for Windows® XP, Windows® 7, Windows® Embedded Standard 7,

Linux®, VxWorks

(Other OSs may also be used with the CPS3003-SA. Please contact Kontron for further information)

Compliant to:

Safety: IEC60950-1, EN60950-1, UL94-V0

EMC: EN55022 Class B, EN55024, EN61000-6-1 / -2 / -3 / -4, EN50121-3-2

(Railway)

Designed to meet or exceed:

Safety: UL60950-1, CSA 22.2 No. 60950-1

EMC: FCC, VCCI, BSMI

3U 4HP/8HP/9HP, 100 x 160 mm

CPS3003-SA with copper heat sink: 530 g

CPS3003-SA with aluminium heat sink: 330 g

281,447 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C

CPS3003-SA with i7-3555LE dual-core 2.5 GHz typ. 21W

CPS3003-SA with i7-3612QE quad-core 2.1 GHz typ. 29W

0°C to +60°C standard

-40°C to +85°C extended temperature E2 (with ULV processor)

-40°C to +85ºC (without additional components)

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)

CPS3003-SA EXPANSION CAPABILITIES

The CPS3003-SA provides various expansion capabilities via specifi cally designed modules such as the SATA Flash Module, the

Smart Extension Module, the CPS3003-EXTIO module and the

CPS3003-BRIDGE module.

The 4HP CPS3003-SA can accommodate two modules, the SATA

Flash Module and the Smart Extension Module. The SATA Flash

Module is available with up to 32 GB SLC NAND fl ash memory and can be used as storage device for onboard data or operating system data. The SATA Flash Module is specifi cally designed and optimized for embedded systems providing high performance, reliability and security. The Smart Extension Module expands the onboard I/O capability and provides one additional SATA cable connector plus one USB 2.0 connector thereby facilitating the connection to system-internal USB and SATA devices. Furthermore, two extension modules are available to expand the CPS3003-SA to a double-slot 8HP/9HP version, the CPS3003-EXTIO module and the CPS3003-BRIDGE module. If more interfaces to the front and an easily accessible storage device are needed, the CPS3003-

EXTIO is the right choice. This module provides one USB 3.0 port, one COM interface on the front panel. In addition, the CPS3003-

EXTIO module provides a CFast card socket accessible from the front panel. The CPS3003-BRIDGE module provides an easy solution to build up hybrid systems comprising a CompactPCI®

Serial part and a classic CompactPCI® part. To realize that, the

CPS3003-BRIDGE provides a PCIe-to-PCI bridge that converts one

PCI Express® data stream to a PCI data stream and makes all signals available for a fully functional CPCI interface available at the J1 and J2 connectors.

/ / 4 www.kontron.com

SATA FLASH MODULE

TECHNICAL INFORMATION

MEMORY CAPACITY

NAND FLASH MEMORY

BANDWITH

GENERAL

ENVIRONMENTAL

DIMENSIONS

WEIGHT

MTBF

POWER CONSUMPTION

OPERATING TEMPERATURE

STORAGE TEMPERTURE

CLIMATIC HUMIDITY

Up to 32 GB SLC-based NAND Flash memory

32nm Toshiba Single Level Cell Components

Up to 60 MB/s read rate

Up to 55 MB/s write rate

38 x 27mm

Ca. 7 grams

3,848,557 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C

Typ. 0.5W, 3.3V supply

0°C to +60°C standard

-40°C to +85°C extended temperature

-40°C to +85ºC

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)

SMART EXTENSION MODULE

TECHNICAL INFORMATION

ONBOARD INTERFACES

GENERAL

ENVIRONMENTAL

SATA

USB

DIMENSIONS

WEIGHT

MTBF

OPERATING TEMPERATURE

STORAGE TEMPERTURE

CLIMATIC HUMIDITY

One onboard angled standard SATA connector, up to SATA 3Gb/s

One onboard angled standard USB 2.0 connector

37 x 48 mm

Ca. 11 grams

5,961,900 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C

0°C to +60°C standard

-40°C to +85°C extended temperature

-40°C to +85ºC

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) www.kontron.com

// CPS3003-SA WITH SATA FLASH MODULE // CPS3003-SA WITH SMART EXTENSION MODULE

/ / 5

CPS3003-EXTIO

TECHNICAL INFORMATION

FRONT INTERFACES (8HP)

GENERAL

ENVIRONMENTAL

CFAST

USB

SERIAL PORT

CONTROL

WEIGHT

MTBF

POWER CONSUMPTION

OPERATING TEMPERATURE

STORAGE TEMPERTURE

CLIMATIC HUMIDITY

One CFast card socket, accessible from the front panel

One USB 3.0 port, 9-pin type-A connector

One 16C550-compatible serial port, RS232 signalling, RJ-45

Reset button and CFast activity LED

140 g

1,351,186 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C

Typ. 1W, without CFAST and peripheral devices connected

0°C to +60°C standard

-40°C to +85°C extended temperature

-40°C to +85ºC (without additional components)

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)

/ / 6 www.kontron.com

CPS3003-BRIDGE

TECHNICAL INFORMATION

FRONT INTERFACES (9HP)

ONBOARD CONTROLLER

CFAST

USB

SERIAL PORT

CONTROL

PCIE-TO-PCI BRIDGE

CompactPCI® BUS INTERFACE

GENERAL

ENVIRONMENTAL

WEIGHT

MTBF

POWER CONSUMPTION

OPERATING TEMPERATURE

STORAGE TEMPERTURE

CLIMATIC HUMIDITY

One CFast card socket, accessible from the front panel

One USB 3.0 port, 9-pin type-A connector

One 16C550-compatible serial port, RS232 signalling, RJ-45

Reset button and CFast activity LED

Pericom PCIe-to-PCI bridge, converts a PCI Express® data stream into a PCI data stream

32-bit, 33/66MHz, universal 5V and 3.3V PCI signalling voltage supported,

4x Req/Gnt & clock lines

170 g

1,351,186 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C

Typ. 1.5 W, without CFAST and peripheral devices connected

0°C to +60°C standard

-40°C to +85°C extended temperature

-40°C to +85ºC (without additional components)

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) www.kontron.com

// CPS3003-SA WITH CPS3003-BRIDGE

/ / 7

ORDERING INFORMATION

ARTICLE DESCRIPTION

CPS3003-SA CONFIGURATIONS

CPS3003-SA-2.1Q-4-4R-S32-T

CPS3003-SA-2.1Q-8-4R-T

CPS3003-SA-2.5D-4-4R-T

CPS3003-SA-2.5D-4-4R-S32-T

CPS3003-SA-2.5D-4-9BR-T

FLASH STORAGE

FLASH-SATA-XGB-CP3002/

CP(S)3003

CFASTX

Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC, 4HP, with P6 Rear I/O, with SATA Flash 32 GB, TPM

Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 4HP, with P6 Rear I/O, TPM

Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC, 4HP, with P6 Rear I/O, TPM

Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC, 4HP, with P6 Rear I/O, with SATA Flash 32 GB, TPM

Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC, 9HP with CPS3003-BRIDGE, with P6 Rear I/O, TPM

(as separate items, not mounted on the CPU)

SATA NAND Flash module, various sizes available

Industrial grade CFast, various sizes available

REAR TRANSITION MODULES

CPS-RIO3-01

DEVELOPMENT SYSTEMS

CPS-CP-ASM4R-84F-200AC-

2B0500-STD

CPS-ASM4R-44F-300AC-

B0500-STD-TT

4HP rear I/O module providing 1x DisplayPort, 2x Ethernet, 1x USB 2.0, 1x USB 3.0, 2x COMs

19" 84HP/4U hybrid system, with fan tray, 200W AC PSU, 5-slot CPCI-S.0 backplane plus 5-slot CPCI backplane

44HP/4U tabletop system, with fans, 300W AC PSU, 5-slot CPCI-S.0 backplane

SOFTWARE

VXW-BSP-CP(S)3003-SA-V6.9.2

VxWorks 6.9.2 Board Support Package

Notes: Windows and Linux BSPs are only available as download on the web page

Please contact your local sales representative for other confi guration options.

// CPS3003-SA WITH REAR TRANSITION MODULE CPS-RIO3-01

CORPORATE OFFICES

/ / 8

EUROPE, MIDDLE EAST

& AFRICA

Lise-Meitner-Str. 3-5

86156 Augsburg

Germany

Tel.: + 49 821 4086 0

Fax: + 49 821 4086 111 [email protected]

NORTH AMERICA ASIA PACIFIC

14118 Stowe Drive

Poway, CA 92064-7147

USA

Tel.: + 1 888 294 4558

Fax: + 1 858 677 0898 [email protected]

1~2F, 10 Building, No. 8 Liangshuihe 2nd Street,

Economical & Technological Development Zone,

Beijing, 100176, P.R.China

Tel.: +86 10 63751188

Fax: +86 10 83682438 [email protected]

www.kontron.com