CP3003-SA



3

RD

GEN. INTEL® CORE™ 3U COMPACTPCI CPU BOARD



high-performance CPU



high-end graphics



high-speed connectivity

CP3003-SA

3RD GENERATION INTEL® CORE™ 3U COMPACTPCI CPU BOARD

Intel®’s new 3rd Generation Core™ technology brings an unprecendeted combination of highest performance and new power-saving capabilities to the embedded market. Making use of this latest technology the CP3003-SA is able to off er a new range of performance and power consumption scalability. On the one hand the CP3003-SA provides utmost performance with a quad-core

CPU option, on the other hand the option to dynamically adjust the processor’s TDP to a desired performance and power envelope through new CPU features such as Confi gurable TDP.

Variety of Interfaces and Options

The CP3003-SA comes with a comprehensive I/O feature set supporting known and established interfaces such as VGA, USB2.0,

Gigabit Ethernet and serial ports as well as the new high-speed interfaces USB3.0 and SATA 6Gb/s. By adding one of the three extension modules - XMC Carrier, Legacy I/O or SATA/USB extension

– the CP3003-SA’s I/O capabilities will be further extended. Backwards compatibiliy is also granted - the optional Rear I/O interface is compatible with predecessor CPU boards.

The CP3003-SA is available with dual- and quad-core CPU performance scalable from the ULV 1.7 GHz Intel® Core™ i7-3517UE up to the 2.1 GHz i7-3612QE processor, Intel® Celeron® processors will be off ered on request. The new Intel® HD4000 graphics with integrated DirectX® 11, OpenGL 3.1 and OpenCL 1.1 support provides an up to four times better graphics performance compared to previous platform designs. Additionally, now three independent graphics outputs are supported. Memory-demanding applications can make use of up to 16GB 1600MHz DDR3 SDRAM with Error Checking and Correction (ECC). For onboard data storage the CP3003-SA offers up to 32GB on a dedicated SLC SATA Flash module or a HDD/

SSD and CFast option on the 8HP extension module.

On the system side, the CP3003-SA supports a PCI 32-bit, 33MHz

(66MHz on request) CompactPCI interface enabling the peripheral mode feature. When installed in a system master slot, the CompactPCI interface is enabled, whereas the CompactPCI interface will be isolated when installed in a peripheral slot.

System Security

The Trusted Platform Module (TPM) provides hardware-based encryption mechanisms to create, seal or store keys, passwords and or other crucial data.

Long-Term Availability

Investing in a new project is always a challenge and risky. Extending the lifetime of an application to the possible maximum is therefore a critical issue to save the development investments. Delivering a stable product based on Intel®‘s embedded product line, the

CP3003-SA ensures long-term availability. This eliminates the risk of unplanned design changes and unexpected expensive application modifi cation. While minimizing deployment risks by providing a broad range of software support, the CP3003-SA eases the process of product integration and maximizes your competitive advantage to meet your time-to-market window.

/ / 2 www.kontron.com

CP3003-SA EXPANSION CAPABILITIES

TECHNICAL INFORMATION

PROCESSOR

MEMORY

ONBOARD CONTROLLER

FRONT INTERFACES 4HP

ONBOARD INTERFACES

SATA EXTENSION CONNECTOR

REAR I/O VIA J2

SYSTEM MEMORY

BOOT FLASH (UEFI)

EEPROM

SATA NAND FLASH

HDD

CFAST

PLATFORM CONTROLLER HUB

GRAPHICS

GIGABIT ETHERNET

UART

WATCHDOG

RTC

TRUSTED PLATFORM MODULE

(TPM)

VGA

USB

ETHERNET

LED’S

SATA CABLE CONNECTOR

HIGH-SPEED EXTENSION

CONNECTORS

3 rd Generation Intel® Core™ i7 processor (22nm technology):

- i7-3612QE: Quad-Core 2.1 GHz, SV, 6MB L3 cache

(shared instruction/data cache, shared among all cores)

- i7-3555LE: Dual-Core 2.5 GHz, LV, 4MB L3 cache

(shared instruction/data cache, shared among all cores)

- i7-3517UE: Dual-Core 1.7 GHz, ULV, 4MB L3 cache

(shared instruction/data cache, shared among all cores)

- Celeron® processor is off ered on project request

All boards are passive cooled with a heatsink in 4HP height

Forced air cooling at specifi c fl ow rate is required depending on the processor version

Up to 16GB dual channel DDR3 SDRAM running at 1600 MHz, with ECC, via two SODIMM sockets

Two redundant 8 MB SPI boot fl ashes with fail-over functionality

Serial EEPROM (24LC64) 64 Kbit for storing uEFI BIOS settings and serial number

Up to 32GB SLC NAND Flash on a dedicated SATA NAND Flash module

The SATA NAND Flash option is only available on a 4HP CP3003-SA

Onboard 2.5” SATA SSD/HDD installation via CP3003-HDD extension, optionally available with two SSD/HDD

Onboard CFast installation via 8HP extension

Mobile Intel® QM77 Platform Controller Hub featuring:

- USB host interface with ten USB2.0 and four USB3.0 ports

(only four USB2.0 and two USB3.0 ports are used on the CP3003-SA)

- SATA host controller with four SATA 3Gb/s and two SATA 6Gb/s ports

with RAID 0/1/5/10 support

- Eight x1 PCI Express 2.0 ports operating at 5.0 GT/s

(only four x1 PCI Express ports are used)

- High-Defi nition Audio Interface

High performance 3D graphics controller integrated in the processor:

- Support for up to 3x independent graphics outputs

- Supports analog display resolutions up to 2048 x 1536 pixels @ 75 Hz

- Supports digital display resolutions up to 2560 x 1600 pixels @ 60 Hz

- Dynamic Video Memory Technology (DVMT)

Up to three 1000BASE-T interfaces, two front/rear switchable with WOL

(Wake-on-LAN) support, third available via extension CP3003-HDD,

Intel 82574L Ethernet controller

XR16L2750IM-F, dual UART, 16C550-compatible

FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, reset, dual-stage confi guration

Integrated in PCH, with 256 Byte CMOS RAM

Atmel AT97SC3204 TPM 1.2 controller

1x VGA-CRT 15-pin D-Sub connector

2x USB 2.0 ports, 4-pin standard USB connectors

2x RJ-45 with integrated LEDs (ACT, SPEED)

6x LEDs: 4x POST Code or General Purpose, WD, TH

1x onboard standard 7-pin SATA connector with locking mechanism,

SATA 6Gb/s

2x high-speed connectors holding:

- PCI Express

- One SATA 3Gb/s

- One SATA 6Gb/s

- 2x USB 2.0/3.0

- 2x DisplayPort

- COM1 (TTL)

- HDA

- LPC

1x 18-pin connector holding one SATA port for the SATA NAND Flash module

The CP3003-SA supports:

- 2x SATA 3Gb/s ports

- 2x Gigabit Ethernet ports without LED signals

- 2x USB 2.0 ports

- 1x VGA analog port

- 2x COM port RS-232 (LVTTL signal level)

- 5x GPIs and 3x GPOs (LVTTL signal level)

- Reset and Power Management signals

- Option to write protect non-volatile RAMs via a special pin www.kontron.com

/ / 3

TECHNICAL INFORMATION

COMPACTPCI BUS INTERFACE

HOT SWAP

SUPERVISORY FUNCTIONS

SOFTWARE SUPPORT

COMPLIANCY

GENERAL

POWER CONSUMPTION

ENVIRONMENTAL

DIMENSIONS

WEIGHT

MTBF

OPERATING TEMPERATURE

STORAGE TEMPERATURE

CLIMATIC HUMIDITY

PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz (66MHz on request), version with rear I/O via J2

Universal 5V and 3.3V PCI signalling voltage supported,

7 Req/Gnt & clock lines

Operating in system slot as system master and in peripheral slot in

PCI passive mode

Support for all signals to allow peripheral boards to be hot swapped.

The individual clocks for each slot and access the backplane ENUM# signal comply with the PICMG 2.1 Hot Swap Specifi cation

Watchdog, software confi gurable, 125ms to 4096s in 16 steps, generates IRQ or hardware reset or dual-stage confi guration

- AMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, board confi guration via Shell, diskless, keyboardless, videoless operation

- LAN boot support

- Board identifi cation number accessible via EEPROM

- Support for Windows® XP, Windows® 7, Windows® Embedded Standard 7,

Windows® Server 2003/2008, Linux, VxWorks®, QNX®

(Other OSs may also be used with the CP3003. Please contact Kontron for further information)

- CompactPCI Core Specifi cation PICMG 2.0 Rev. 3.0

- CompactPCI Hot Swap Specifi cation PICMG 2.1 Rev. 2.0

Designed to meet or exceed:

- Safety: UL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1

- EMI/EMC: EN 55022 / EN 55024, EN 61000-6-3 / EN 61000-6-2

3U 4HP/8HP/12HP CompactPCI, 100 x 160 mm

CP3003-SA 4HP: 320 g

274,266 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C

CP3003-SA with i7-3555LE DC 2.5 GHz typ. 21W

CP3003-SA with i7-3612QE QC 2.1 GHz typ. 29W

0°C to +60°C, standard

-40° to +85°C, extended temp. E2 (with ULV processor)

-40°C to +85ºC (without additional components)

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)

CP3003-SA EXPANSION CAPABILITIES

The CP3003-SA provides various expansion capabilities via specifically designed modules such as the SATA Flash Module, the Smart

Extension Module, the CP3003-HDD module and the CP3003-XMC module. The 4HP CP3003-SA can accommodate two modules, the

SATA Flash Module and the Smart Extension module. The SATA

Flash Module is available with up to 32 GB SLC NAND fl ash memory and can be used as storage device for onboard data or operating system data. The SATA Flash Module is specifi cally designed and optimized for embedded systems providing high performance, reliability and security. The Smart Extension Module expands the onboard I/O capability and provides one additional SATA cable connector plus one USB 2.0 connector thereby facilitating the connection to system-internal USB and SATA devices. Furthermore, two extension modules are available to expand the CP3003-SA to a double-slot 8HP version, the CP3003-HDD module and the

CP3003-XMC module.

If more interfaces to the front are needed, the CP3003-HDD is the right choice. This module provides one USB 3.0 port, one Gigabit

Ethernet interface, two DiplayPorts, and one COM interface on the front panel. In addition, the CP3003-HDD module provides support for a 2.5" SATA HDD/SSD and a CFast card. As a further extension capability of the CP3003-SA to 12HP, a SATA adapter module is available with the CP3003-HDD to provide an additional SATA connector for 2.5" SATA HDD/SSD devices. The 12 HP CP3003-SA does not provide a CFast socket.

The CP3003-XMC module provides one x8 (or less) PCI Express

2.0-compliant interface with up to 5 GT/s for one XMC module. In addition, the CP3003-XMC module is capable of accommodating a

CFast card.

/ / 4 www.kontron.com

SATA FLASH MODULE

TECHNICAL INFORMATION

MEMORY CAPACITY

NAND FLASH MEMORY

BANDWITH

GENERAL

ENVIRONMENTAL

DIMENSIONS

WEIGHT

MTBF

POWER CONSUMPTION

OPERATING TEMPERATURE

STORAGE TEMPERTURE

CLIMATIC HUMIDITY

Up to 32 GB SLC-based NAND Flash memory

32nm Toshiba Single Level Cell Components

Up to 60 MB/s read rate

Up to 55 MB/s write rate

38 x 27mm

Ca. 7 grams

3,848,557 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C

Typ. 0.5W, 3.3V supply

0°C to +60°C, standard

-40°C to +85°C, extended temperature

-40°C to +85ºC

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)

SMART EXTENSION MODULE

TECHNICAL INFORMATION

ONBOARD INTERFACES

GENERAL

ENVIRONMENTAL

SATA

USB

DIMENSIONS

WEIGHT

MTBF

OPERATING TEMPERATURE

STORAGE TEMPERTURE

CLIMATIC HUMIDITY

One onboard angled standard SATA connector

One onboard angled standard USB 2.0 connector

34 x 49 mm

Ca. 11 grams

6,534,579 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C

0°C to +60°C, standard

-40°C to +85°C, extended temperature

-40°C to +85ºC

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) www.kontron.com

// CP3003-SA WITH SATA FLASH MODULE // CP3003-SA WITH SMART EXTENSION MODULE

/ / 5

CP3003-HDD

C P 3 0 0 3

USB 2.0

GbE A

GbE B

TECHNICAL INFORMATION

FRONT INTERFACES (8HP) DISPLAYPORT

ETHERNET

USB

SERIAL PORT

CONTROL

ONBOARD INTERFACES SATA

GENERAL

ENVIRONMENTAL

CFAST

WEIGHT

MTBF

POWER CONSUMPTION

OPERATING TEMPERATURE

STORAGE TEMPERTURE

CLIMATIC HUMIDITY

2x 20-pin DisplayPort connectors, DVI/HDMI capable through passive cable adapter

1x RJ-45 with integrated LEDs (ACT, SPEED)

1x USB 3.0 port, 9-pin type-A connector

1x 16C550-compatible serial port, RS232 signalling, RJ-45

Reset button and HDD activiy LED

1x SATA connector for connecting a SATA 2.5” HDD/SSD (SATA 6Gb/s),

Option to add 2 nd SATA HDD/SSD (results in 12HP stacking height and

CFast socket won’t be available)

1x CFast card socket

CP3003-SA 8HP: 460 g, CP3003-SA 12HP: 520 g

1,120,458 h acc. to MIL-HDBK-217 FN2, Ground Benign, controlled at 30°C typ. 0.5W, without peripheral devices connected

0°C to +60°C, standard

-40°C to +85°C, extended temperature

-40°C to +85ºC (without additional components)

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)

/ / 6

// CP3003-SA 12HP

www.kontron.com

ORDERING INFORMATION

ARTICLE DESCRIPTION

CP3003-SA CONFIGURATIONS

CP3003-SA-2.1Q-8-4F-T

CP3003-SA-2.1Q-8-4R-T

CP3003-SA-2.1Q-8-8R-T

CP3003-SA-2.5D-4-8F-T

CP3003-SA-2.5D-8-8R-T

CP3003-SA-2.5D-8-8XR-T

CP3003-SA-1.7D-4-4F-E2-T

CP3003-SA-1.7D-8-8R-E2-T

Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 4HP, Front I/O, with TPM

Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 4HP, Rear I/O, with TPM

Core i7-3612QE, Quad-Core 2.1GHz, 6MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC,

8HP with CP3003-HDD, Rear I/O, with TPM

Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC,

8HP with CP3003-HDD, Front I/O, with TPM

Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC,

8HP with CP3003-HDD, Rear I/O, with TPM

Core i7-3555LE, Dual-Core 2.5GHz, 4MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC,

8HP with CP3003-XMC, Rear I/O, with TPM

Core i7-3517UE, Dual-Core 1.7GHz, 4MB L3, 4GB (2x 2GB) SODIMM DDR3 with ECC, 4HP,

Front I/O, extended temp. E2, with TPM

Core i7-3517UE, Dual-Core 1.7GHz, 4MB L3, 8GB (2x 4GB) SODIMM DDR3 with ECC, 8HP with CP3003-HDD,

Rear I/O, extended temp. E2, with TPM

(as separate items, not mounted on the CPU)

SATA NAND Flash module, various sizes available

Industrial grade CFast, various sizes available

FLASH STORAGE

FLASH-SATA-XGB-CP3002/

CP3003

CFASTX

REAR TRANSITION MODULES

CP-RIO3-04

CP-RIO3-04

CP-RIO3-04S

SOFTWARE

VXW-BSP-CP3003-SA-V6.9.2

QNX-BSP-CP3003-SA-V6.5

4HP rear I/O module (2x Ethernet, 2x USB, VGA, 2x SATA connectors)

8HP rear I/O module (additional to 4HP COM1/2)

4HP rear I/O module (2x Ethernet, COM, VGA, 2x SATA connectors)

VxWorks 6.9.2 Board Support Package

QNX6.5 Board Support Package

NOTES: » Windows and Linux BSPs are only available as download on the web page

» The SATA NAND Flash module cannot be used in conjunction with the CP3003-HDD/CP3003-XMC module

Please contact your local sales representative for other confi guration options.

CORPORATE OFFICES

/ / 7

EUROPE, MIDDLE EAST

& AFRICA

Lise-Meitner-Str. 3-5

86156 Augsburg

Germany

Tel.: + 49 821 4086 0

Fax: + 49 821 4086 111 [email protected]

NORTH AMERICA ASIA PACIFIC

14118 Stowe Drive

Poway, CA 92064-7147

USA

Tel.: + 1 888 294 4558

Fax: + 1 858 677 0898 [email protected]

1~2F, 10 Building, No. 8 Liangshuihe 2nd Street,

Economical & Technological Development Zone,

Beijing, 100176, P.R.China

Tel.: +86 10 63751188

Fax: +86 10 83682438 [email protected]

www.kontron.com