Jingqi Remote Control Device for Walk Device Instructions

Remote control interface
SPEED DOWN
SPEED-4
MENU
SPEED UP
SPEED-2
START/ STOP/PAUSE
1. START:Press the button in standby or pause mode，Start
running the treadmill。
STOP:Long Press the button while the treadmill is running or
pause mode，Stop the treadmill。
PAUSE:Short Press the button while the treadmill is running，
Stop the treadmill。
2. MENU：
A.Rest is displayed in standby mode,Press the key to switch
cycle:redy mode→time counter mode→range reversal
mode→Calorimeter mode→Standby mode.
B.In working condition ,Press the key to switch cycle:0.00→
（time）T:00:00→（distance）D:0.00→（calorie）C:0000→（speed）
S:0.00
3. SPEED UP and SPEED DOWN :
A. Rest is displayed in standby mode,Press the key to
adjust the parameter settings,Long press to adjust quickly
B. In working condition,short press key to adjust the speed
change ,Long press to adjust quickly
4.
SPEED-2:In working condition,press key to adjust the
speed to 2.0。
5.
SPEED-4:In working condition,press key to adjust the
speed to 4.0。
6. User Manual
Please add the required statement below into the user
manual as required per 15.21
CAUTION: Any changes or modifications not expressly approved
could void the user’s authority to operate the equipment.
">