Kogan 32” LED Smart TV & DVD Combo - D96S
KALED32D96SQA
16
17
18
21
DVD Remote Control
22
23
24
25
Kogan 32” LED Smart TV & DVD Combo - D96S
32
INPUTS & PORTS
�'
//
'
-IJ
((( \
"'
'f II
�
CJ
D
=
..
@
@
@
iiiimiimn11miim111
'
I•
I@
@
in
I
T
I
-------
-------
'
.
r
'!'
IIT1
"'
il
I
I
I
Ethernet port (LAN)
-e
-a
-a
-a
4 Headphone jack (3.5mm line out)
= 500mA)
2 Digital audio (Optical out)
5 USB 2.0 (x2; 5V
3 Antenna
6 HDMI (x3; ARC support on HDMI 2)
USB 2.0
HDMI
USB storage devices can be inserted to
record and pause live TV in PVR mode, or
to watch media files stored on device in
media mode.
Connect an HDMI cable between the
HDMI port on the TV and the HDMI port
on the DVD player/Set-Top Box.
Ports marked 'ARC' also support Audio
Return Channel.
ANT
For free-to-air TV, use an antenna cable
(not supplied) to connect to a working
antenna, either via an antenna wall
socket, or directly.
LAN
For a wired internet connection via a
broadband modem or router, connect an
Ethernet cable to the LAN port.
Digital
audio out
(optical)
Audio out for digital audio devices. This
model uses an Optical port, not Coaxial.
3.5mm
audio out
Line audio out port for use with
headphones, amplifier, soundbar or any
other audio device via an AUX cable (not
supplied).
5
DVD remote control only use for DVD combo.
for
100x100
You will need to ensure the distance between the remote control and the
TV is no greater than 8 metres, at an angle of no more that 30 degrees on
either side (6a). Point the remote towards the sensor at the front of the TV
White light on
must not be exposed to
FIRST TIME SETUP
When turning the TV on for the first time, the Welcome screen will appear.
Press the OK button to commence.
Use the•!•!◄/► Direction buttons and Wheel to navigate the following
options:
Language and Location Settings
Select the on-screen display (OSD) language, your country and time zone from
the drop-down lists.
Internet and Device Connection
Connect all of your devices (set-top boxes, Blu-ray players, soundbars, gaming
devices, etc.) to the TV. If using a wired internet connection, connect an
Ethernet cable to the 'LAN' port at the back.
Select Wi-Fi network
If you have connected an ethernet cable for wired internet, your TV will
automatically connect to the network and skip this step.
If you want to use a wireless (Wi-Fi) network, the TV will now scan for nearby
networks. Ensure the TV is within range of your wireless modem or router, and
have your password handy. Follow the prompts to input your password and
connect your TV to your selected network.
If using an LG Mobile smartphone connected to the desired Wi-Fi network, you
can select "via LG Mobile" to connect to the same network.
Terms & Conditions
Accept terms and conditions, or select to view additional details. You can
select "Agree All" to agree to all User Agreements.
Set-Top Box Setup
If not using a set-top box, select "TV Only". If using a set-top box and not
wishing to use free-to-air channels, select "Set-Top Box Only".
If wishing to use both, select "TV & Set-Top Box".
SeNice Area Postcode
Enter your location's postcode.
Programme Tuning
The TV will automatically search and save all available free-to-air channels.
The option is provided to search for digital channels only (recommended for
most regions), skipping analogue channels.
NOTE:
If "Set-Top Box Only" was selected earlier, this stage will be skipped.
Connect to LG ThinQ
Your TV is compatible with LG smart home devices, and can also play content
from your smartphone or personal devices. To connect your TV with LG ThinQ,
scan the Android or iOS (iPhone) QR code with your smartphone and follow
the prompts to set up.
NOTE:
Service availability may differ depending on country or region.
First Time Setup Completed
Press Close to finalise the setup and go to the Home Dashboard.
Paired Devices
The TV will now scan for external devices which can be linked to the Universal
Control settings (such as set-top boxes or Blu-ray players). This will allow
services such as Foxtel or Fetch boxes (sold separately) to be linked to your
TV's remote control.
9
1. You can check and select the external device
connected through the extern port or network.
2. Connect your mobile device to TV to share the
mobile screen and enjoy the contents.
3. It can only be selected if you have connected a USB
storage device or a media server.
4. The connected camera is launched.
5. The currently selected output speaker is displayed,
and you can navigate to the output speaker settings
screen.
6. You can view the list of connected Bluetooth devices
and select one.
7. You can check and control the device connected via
the Home IoT (Internet of Things).
Please refer to Connecting External Devices → Connecting
Home loT Devices in User Guide for more information on the
action.
8. You can log in or out with your LG ThinQ account.
9. Edit Inputs : You can edit the name of the connected device or
apply the related settings.
Edit home loT devices : You can hide or show connected Home
loT Devices and rearrange the list.
connected device. Universal Control Settings : Move to the
Universal Control Settings app.User Guide : Move to the User
Guide app.
10. Closes the app.
You can log in to your LG Account or view basic information about the account
to which you are currently logged in.
For more information, see Getting Started with webOS TV Managing Your LG
Account in User Guide.
Launch Search.
To see the details, click the Apps and Content Content Search in User Guide.
Returns to the most recently used TV or external input.
You can run, move, and delete the apps installed on your TV.
1. You can set the Picture Mode.
5. Directs to the Network settings.
2. You can set the Sound Mode.
6. You can set more options.
3. You can choose the Sound Out.
7. You can add/delete the quick setting
4. Directs to the Game Optimizer
items or change their order.
settings.
MEDIA PLAYBACK
External storage device
Supported external subtitles:
To access media playback mode, insert a USB drive containing files of the
following type into the TV's USB input port. Next, from the Home Dashboard,
select the storage device (USB drive). You will be given an option to read the
device for Photo & Video files, Music files, or view Recordings (Programmes
recorded on the TV).
SMI, SRT, SUB (MicroDVD, SubViewer 1.0/2.0), SSA (Sub Station Alpha), ASS
(Advanced Sub Station Alpha), TXT (TMPlayer), PSB (PowerDivX), DCS (DLP
Cinema)
You can also open the USB media menu directly from the source/input list,
by pressing the c:9" Source button on the remote control and browsing the Storage
options.
The following media file formats are supported:
Format
Data
Supported embedded subtitles:
MKV files: SSA, ASS, SRT; MP4 files: Timed Text
Share computer content (Windows 10)
When connected to the same network, media files from your PC can be
watched on the TV.
On your PC, right click the file and select "Cast to Device". Select the name
of the TV, and Playback will begin. Playback rate may vary depending on the
network connection.
Photo
JPEG, PNG, BMP
Browse computer content from TV (Windows 10)
Audio
FLAC, MP3, OGG, WAV, WMA
On your PC (connected to the same network), open the Start menu and search
'Media Streaming Options', selecting the Control Panel option by that name.
Video
3GP, 3G2, ASF, AVI, DAT, MKV, MOV, MP4, MPG,
MPEG, MTS, TP, TRP, TS, VOB, WMV
Alongside flashdrives, the TV's USB port is also capable of reading from
devices such as digital cameras and USB hard disks.
NOTES
• A video file and its subtitle file must be in the same folder. For subtitles to be
displayed properly, make sure that the video file and the subtitle file have the
same name.
• Some user-created subtitles may not work properly.
• Subtitles on a Network Attached Storage (NAS) device may not be supported.
• Streams that include Global Motion Compensation (GMC) and Quarterpel
Motion Estimation (Qpel) are not supported.
• ULTRA HD video (ULTRA HD models only): 3840x2160, 4096x2160
• Some HEVC-encoded ULTRA HD videos other than the content officially
provided by the manufacturer may not be played. Some codecs can be
supported after a software upgrade.
-
Media streaming options
1'-
« Net... > Media streaming options
v
Cl
□
X
p
Search Control Panel
Choose media streaming options for computers and devices
Mediartre�ming is nottumedon
Media streaming allows you to send your music, pictures and videos to other computers and devices
on your network. It .:1lso allo�you to receive media from other computers and devices.
If you tum on media streaming. your current network profile i'nd firewi'II settings will be modified.
You should turn on media rtreaming only on networks that you trust, such as home or work
networks.
I @;!Tum on media streaming I
Tell mt mort about medi,i striMming
Read the privacy statement online
}K
�
Select 'Turn on media streaming' from the window that appears, and allow all
of the media streaming options. Select 'OK' to save the settings.
Now on the TV's Home Dashboard, the PC will appear as a media option,
allowing you to browse and select the available files.
12
SETTINGS
PICTURE
Picture Mode
Select the picture mode that is best suited to your viewing environment,
preferences or video type. By adjusting and setting each item in more detail
based on the mode, your video is better optimised for its characteristics.
Depending on the input signal, the available picture modes may be different.
Normal signal:
Colour: Tones down or up the colours displayed on the screen. The closer to
100, the deeper the colour.
Tint: Adjusts the colour balance between red and green displayed on the
screen. The closer to Red 50, the redder the colour will be. The closer to Green
50, the greener the colour will be.
Colour Temperature: Adjusts the colour tone of the entire image. As you lower
the level, you get a warmer tone, and as you raise it, you get a cooler tone.
Vivid, Eco/APS (auto power saver) 2, Cinema, Cricket (sports), Game
NOTES
HDR signal:
• The settings you specify only apply to the currently selected input mode. To
apply your current picture settings to all input modes, select Apply to all
inputs.
Vivid, Standard, Cinema, Game
NOTES
• When watching online service content, the Picture Mode may be changed to
match the content being shown.
• Picture Mode may modify Energy Saving settings and can affect energy
consumption. You can adjust their settings manually in the Energy Saving
menu.
Fine-Tuning Picture Mode
This feature allows you to adjust the selected picture mode in detail.
• Depending on the input signal or the selected picture mode, the available
options may differ.
• The configurable items differ depending on the model of your TV.
Advanced Controls
Dynamic Contrast: Corrects the difference between the bright and dark sides
of the screen for optimal results depending on the brightness of the picture.
Dynamic Colour: Adjusts the colour and saturation of the picture to make the
image more colourful and lively.
Gamma: Adjusts the medium brightness of the picture. Select Low for a bright
picture, select High 1 or High 2 for a dark picture or select Medium for medium
brightness.
Backlight: Controls the level of screen brightness by adjusting the backlight.
The closer to 100, the brighter the screen. Decrease the Backlight to reduce
energy consumption. If the Energy Saving is set to Maximum, you cannot
adjust the Backlight. In this case, navigate to Picture> Energy Saving and set
to Off or Minimum.
This feature can be used while watching content through an external input.
Contrast: Adjusts the contrast of the bright and dark areas of the picture. The
closer to 100, the higher the contrast.
Noise Reduction: Removes small dots that stand out, resulting in a cleaner
image.
Brightness: Adjusts the overall screen brightness. The closer to 100, the
brighter the screen. You may use the Brightness settings particularly to set the
dark part of the image.
Black Level: Adjusts the brightness of the dark parts of images. Select High for
a bright screen or select Low for a dark screen.
Sharpness: Adjusts the sharpness of the image. The closer to 50, the sharper
and clearer the image.
TruMotion: Adjust the image quality of fast-moving pictures.
Picture Options
Real Cinema: Optimise display for movies.
13
SETTINGS (cont'd)
Resetting Picture Mode
Energy saving
If you want to reset the image settings to the factory defaults after configuring
the image settings, select reset for each image mode.
Reduces power consumption by adjusting screen brightness. If you use Energy
Saving function, brightness of your TV will be affected.
Aspect Ratio Settings
Select between: Off/ Min/ Med/ Max/ Screen Off
You can change the screen size according to the type of content you are
watching.
Off: Turns off the Energy Saving mode.
16:9: Displays an aspect ratio of 16:9.
Original: Changes the aspect ratio to 4:3 or 16:9 depending on the input video
signal.
4:3: Displays an aspect ratio of 4:3.
Vertical Zoom: You can adjust the vertical dimension of the screen and align
the screen vertically by using Adjust Zoom Ratio and Adjust Screen Position.
4-Way Zoom: You can adjust the horizontal/vertical/diagonal dimensions of
the screen and align the screen horizontally/vertically by using Adjust Zoom
Ratio and Adjust Screen Position.
NOTES
• The configurable items differ depending on model.
• The picture may get distorted while zooming in or out.
• Selecting a different screen size from the original size may cause the image to
look different.
• Depending on the combination of picture format and screen size, the edges
may be hidden or shown in black, or both sides of the picture may flicker. Also,
when selecting an item shown on the broadcast screen, the outline may not
be aligned correctly.
• Depending on the input signal, the available screen sizes may be different.
Just Scan: If you turn this feature On, you can view the content in the aspect
ratio that is in the broadcast signal or content source. If the edge of the screen
is not clean, please turn it Off. If set to Auto, the feature switches between On
or Off status depending on the information contained in the video signal. The
items that can be selected may vary depending on the current input.
Minimum/ Medium/ Maximum: Applies the pre-set Energy Saving mode.
Screen Off: Screen is turned off and only sound is played. Press any button
except the power and the volume buttons to turn the screen back on.
Additional settings:
Eye Comfort Mode: The colour temperature will be adjusted to reduce eye
fatigue. Select On/Off.
HDMI ULTRA HD Deep Colour: If you connect a device that supports this
function, you can enjoy a clearer image. After connecting the playback device,
set to On.
If the connected device does not support this function, it may not work
properly. In that case, change the setting to Off.
Instant Game Response
Set the HDMI port connected to the device to be On to enjoy games with
the optimal video for the game. If the connected device does not support this
function, it may not work properly.
NOTES
• Set the HDMI ULTRA HD Deep Colour feature to On for the HDMI terminal
connected to the gaming device to enable Instant Game Response.
• It works only when the Sound> Sound Out is Internal TV Speaker/Audio Out
(Line Out)/Wired Headphones/Wired Headphones+ Internal TV Speaker (the
configurable items differ depending on model.)
• When the Instant Game Response is launched, the video may blink
temporarily.
• If you turn this feature On, you cannot change some video settings items.
14
SETTINGS (cont'd)
SOUND
Sound Mode
You can select the most suitable sound mode for each genre.
• Standard: Optimises the sound for all types of content
• Cinema: Optimises the sound for cinemas
• Clear Voice: Boosts voice clarity
• Cricket: Optimises the sound for sports games
• Music: Optimises the sound for music
• Game: Optimises the sound for gameplay
Balance: You can adjust the volume of the left and right speakers.
ULTRA Surround: Enjoy an immersive soundscape with the virtual multi­
programme surround sound effect.
Equalizer: You can set the desired sound by adjusting the equalizer directly.
(100 Hz/300 Hz/1 kHz/3 kHz/10 kHz).
Reset: You can reset the sound effect settings.
device connected. If you connect the wired headphones while the TV is
powered on, it automatically detects the wired headphones and redirects
audio through them.
Bluetooth: Wirelessly connect a Bluetooth audio device to enjoy TV sound
more conveniently. Refer to the user manual of the Bluetooth audio device for
details on how to connect and use the device.
BLUETOOTH NOTES
• Press to view the connected devices or the devices that can be connected to
connect any one of them.
• If the device fails to connect, check the power of the device to connect to and
check if the audio device is working properly.
• Depending on the type of the Bluetooth device, the device may not connect
correctly or an abnormal behavior may occur such as unsynchronized video
and audio. (The mobile-only headsets may not work)
• Sound may stutter or sound quality may be reduced if:
• the Bluetooth device is too far from the TV;
• there are obstacles between the Bluetooth device and the TV; or
NOTES
• These option can be enabled if Sound Mode is set to Standard
• This setting is only available for Internal TV Speaker
• The configurable items differ depending on model
Sound Out
Internal TV Speaker: Audio is played through the TV's internal speakers.
Optical: You can connect an audio device that supports Optical to the optical
digital audio output port to enjoy your TV's sound in richer quality and greater
convenience. For some devices, you can adjust the volume using the TV
remote control.
HDMI ARC: Sound from the TV can be output through an external audio
device connected via a HDMI (ARC) port. Select HDMI ARC to automatically
turn on SIMPLINK. Once SIMPLINK is turned off, the output speaker settings
automatically revert to the default settings for uninterrupted audio output.
Audio Out (Line Out)/ Wired Headphones: Select Wired Headphones or
Audio Out (Line Out) to optimise audio output according to the
• used together with radio equipment such as a microwave oven or wireless LAN.
• If you continue to experience problems, we recommend using a wired
connection (optical digital, HDMI ARC port, etc.)
Playing Audio through the TV's Internal Speakers and External Audio
Device Simultaneously: Audio can be played through the multiple devices
simultaneously.
• Optical+ Internal TV Speaker
• Wired Headphones+ Internal TV Speaker
If you connect the wired headphones while the TV is powered on, it
automatically detects the wired headphones and redirects audio through
them.
NOTES
• When Instant Game Response is set to On, audio delays may occur if you
set Sound Out to WiSA Speakers/Optical/HOMI ARC. Switch to Internal TV
Speaker or change Sound > Additional Settings to correct this.
• Set HDMI Input Audio Format to PCM.
15
12
1. Lock / Unlock : Lock the selected channels or unlock the locked channels.
Delete / Restore : Set the selected channels to be skipped when switching channels,
or disable the skipping option of the channels previously set to be skipped.
SETTINGS (cont'd)
Connect via WPS PIN: T his is a method to connect to an access point using a
Wi-Fi Protected Setup-Personal Identification Number (WPS-PIN). Select the
access point you want to connect to. Enter the PIN displayed on the access
point's Wi-Fi device.
Advanced Wi-Fi Settings: Once you connect to a wireless network, you
can view connection information such as detailed IP address information. In
addition, you can change the IP address and DNS server address you want
to connect to by pressing the Edit button. 1Pv6 setup does not support Edit
function.
Device Connection Settings
Auto Device Detection: It automatically sets to enable you to control the
devices connected via the HDMI with the Magic Remote
HDMI-CEC: With a single remote control, you can easily manage various
devices such as a soundbar or set-top box connected to a TV with HDMI.
TV On With Mobile: If Turn On Via Wi-Fi or Turn On Via Bluetooth is set to
On, you can turn on your TV using an application that supports TV On With
Mobile.
NOTES
• The TV should be connected to a network.
• The TV and the device to be used should be connected to the same network.
• The Turn On Via Wi-Fi feature must be used in an opp on a smart device that
supports the feature.
• Not all smartphones may be compatible with the Turn On Via Bluetooth
feature.
• The TV must be plugged in, with the wall outlet switched on.
• To connect for the first time, make sure the device to be used is ready to
connect.
Up to three devices can be connected and used simultaneously.
GENERAL
Auto Power Sync: If Auto Power Sync is set to On, turning on a HDMI-CEC
linked device will turn the TV on. When you turn off the TV, the device will also
be turned off.
Al Service
Bluetooth devices: T his feature enables you to connect a wireless keyboard
to your TV. Turn on the device, set it to pairing mode, and then click Connect
on your TV screen. If there is a wireless keyboard previously connected, it will
be automatically reconnected to your TV once your TV turns on. To disconnect
the existing connection, click Disconnect.
Setting the Al Service: Enable the recommended services based on the usage
history.
Voice Recognition Help and Settings: Change settings related to the speech
recognition features, such as turning Voice Response on / off.
Al Recommendation: Enable content recommendation messages according
to your content viewing history and opp usage history.
Universal Control Settings: If you set up the universal remote control, you can
control peripheral devices connected to the TV with the Magic Remote instead
of their own remote controls.
Content Recommendations: Enable content recommendations or
introductions to new features based on your pattern of viewing TV and using
apps.
Mobile Connection Management
Network-Based Personalisation Recommendations: Enable
recommendations for programmes and content based on viewing history
through the network.
You can set to use a smart device connected to the TV to control the TV or
manage the connection history.
Screen Share: You can delete the connection history of the device that was
connected to the TV through Screen Share.
• On: Get more recommendations through the server.
• Off: We recommend basic contents based on your viewing history.
Delete Usage Data: It resets the content view history and the opp usage
history. If you reset them, it takes some time to receive recommendations for
contents again.
18
SETTINGS (cont'd)
1. Navigate to General> Safety in
the settings menu.
2. Set Safety to On.
3. Select TV Rating Locks.
NOTES
Home Settings
• Supported only in the digital mode
• Some models may not be supported
Home Auto Launch: Enable Home to launch automatically when turning on
the TV.
• The initial password is set as "0000"
Additional Settings
Enabling Programme Locks:
Programme Locks block the programmes that contain inappropriate contents
for children. The programmes can be selected but the screen is blank and the
audio is muted. To watch a locked programme, enter the password.
1. Navigate to General> Safety in the settings menu.
2. Set Safety to On.
3. Select Programme Locks.
4. Select the Programmes to lock.
5. Select Lock / Unlock.
Application Locks: You can lock or unlock the application.
1. Navigate to General> Safety in the settings menu.
2. Set Safety to On.
3. Select the Application Locks.
4. Select the Applications to lock.
Input Locks: Enabling, locking or unlocking Input/Source channel Locks.
1. Navigate to General> Safety in the settings menu.
2. Set Safety to On.
3. Select Input Locks.
4. Select the Inputs to lock.
Reset Password: If you lose the password you set, you can reset it as follows,
1. Navigate to General> Safety in the settings menu.
2. Press the Act] button (channel up) four times consecutively on the remote
control. The master password input window will appear.
3. Enter the numbers "0313" in the master password input window, then
press Enter.
4. The password will be reset to "0000".
Account Management
Settings Help: If you select the setting menus, you will see the hints of the
settings. Turn on/off description box in Settings.
Menu Transparency: By setting this feature to On, you can make some of the
menus (e.g. Live Menu, Search, etc.) transparent.
Screen Saver: When the currently displayed opp has not received any user
input for an hour, it will be replaced by a Screen Saver. Setting the Screen
Saver feature to Off maintains the same display for an extended period,
which may compromise display quality. The compromised screen may not be
recoverable. This is especially notable when playing video games with Heads
Up Displays (HUD) or watching programming with channel watermarks/logos.
No Signal Image: You can turn on or off the image displayed when there is no
signal.
ECO Mode: Set power options to reduce energy consumption.
Auto Power Off: Set the TV to turn off automatically when there has been no
user input for a specified amount of time.
HDD Eco Mode: If you set the mode to On, the USB HDD connected to the
TV will go into power-saving mode when it has been left unattended for an
extended period of time.
Quick Start+: This setting puts your TV in standby mode when it is turned
off so it will start up more quickly the next time it is turned on. Toggle On/Off.
Turning this option on may increase energy consumption.
Standby Light: You can turn the standby light on or off.
NOTES
• Depending on your TV, this list may differ to the final settings menu.
Managing Your LG Account: In Account Management, you can use your email
address to create a new LG account. This can be used for additional ThinQ
functions and compatibility.
20
1. You can check the details by selecting the desired item. If it supports shortcu can launch
the app.
2. You can delete notifications.
Closes the app.
DVD
Audio Set
This option to set the type of sound.
TV System
Set the TV system as PAL, Auto or NTSC. Please choose according to the local TV system
and disk.
TV Type
Set the TV type as 4:3 Panscan, 4:3 LetterBox, 16:9.
OSD Language
Set the DVD OSD language as English, French or Spanish.
Screen Saver
Resume
Audio Language
Set the DVD audio language.
Subtitle
Set the DVD subtitle language.
Password
Set a new DVD setup parental password. (This function is not applicable to this TV model)
Parental
Set the parental control rating. To change this option, you need password,
and the original one is "0000". (This function is not applicable to this TV model)
Default
Reset the DVD setup menu options to factory default
1. Use the TV remote control to operate the TV. To watch a DVD, switch the TV to AV mode using the
TV remote.
2. In AV mode, press the power button on the DVD remote control. The TV will automatically switch to
DVD mode.
3. Once in DVD mode, insert a DVD disc into the player. The DVD will begin playing automatically.
4. To stop the DVD or switch back to TV mode, press the power button on the DVD remote or use the
TV remote to control the TV directly.
NOTE: The TV remote has higher authority than that of DVD remote.
.avi,.mp4.m4v.mov.3gp.3g2.mkv.ts.trp.tp
.mts.mpg.mpeg.dat.vob.mp3.ogg.flac.f4a
.m4a.aac.adts.jpeg.jpg.jpe.png.bmp.heif
.heic.avif
732 x 70 x 440 mm
732 x 192 x 481 mm
6
4.0 kg
6.1 kg
ARM cortex –CA75*2, CA55*2
IMG BXE4 -High speed
WebOS22
16.7M
480i,480P,576i,576p,720p,1080i,1080p
3000:1
HKC
65W
131
5
1366x768
8.5ms
32
6
6
24
WebOS TV WILL POWER OFF AUTOMATICALLY AFTER 4 HOURS IF THERE IS NO USER INPUT.
Copyright 2024, Kogan.com - KALED32D96SQA UM 09-30
25
">
