QUICK SETUP GUIDE
MINI WIRELESS PRO CONTROLLER
FOR SWITCH
NX-SWLCA
PACKAGE CONTENTS
• Mini Wireless Pro Controller
• USB A to C Charging Cable
Before using your new product, please read these instructions to prevent any damage.
LED Indicators
Select Button (-)
Start Button (+)
Left Button(L)
Turbo Button
Right Button(R)
Screenshot Button
Left Joystick
A,B,X,Y Buttons
Directional Pad
Right Joystick
Home Button
Charging Port
Right Trigger(ZR)
Left Trigger(ZL)
Reset
CONNECT WITH NINTENDO SWITCH
Wired Connection
1. Turn on the ‘Pro Controller Wired Communication’ within the Switch
System Setting>Controllers and Sensors>Pro Controller Wired
Communication: On
2. Insert the USB cable into a USB port on the Nintendo Switch dock. Connect
the other end of the cable to the controller.
3. The controller will automatically connect and the LED indicator light will
blink slowly.
CONNECT WITH NINTENDO SWITCH
Wireless Connection
1. From the Switch HOME menu, select ‘Controllers,’ then ‘Change Grip and
Order.’
2. While the following screen is displayed, press and hold down the ‘Home
button’ for at least one second on the controller you wish to pair.
NOTE: After controller is paired once, it will autoconnect next time.
CONNECT WITH PC
Wired Connection
1. Using the included USB-C Cable, connect to the USB-C port at
the top of the controller and connect the other end to an available
USB port on the PC.
2. If controller is off, press the ‘Home button’ to turn on.
Wireless Connection
1. When the controller is turned off, press and hold the ‘Home Button’ to
power on for 3 seconds. The controller LED1-LED4 will flashing.
2. The controller will enter the Bluetooth pairing state,The device name
recognized by the computer is ‘Pro Controller’.
Press and hold the ‘Home Button’ for 3 seconds to enter pairing mode
(LED will flash BLUE rapidly).
4. Enter the Bluetooth settings on your device.
5. Select ‘Pro Controller’ . LED will turn solid BLUE when connected.
3. After the connection is successful, the current channel LED will be on.
NOTE: A previously paired device will automatically pair to the controller
when powered on.
TURBO MODE
Configurable Buttons
The A/B/X/Y,Left Button, Rigt Button, Left Trigger and Right Trigger.
Turbo Setup
Press and hold the Configurable button, then press the ‘T button’ once to
enable the Turbo option.
Repeat this operation to cycle through the Turbo option(Automatic,Off)
Clear all Turbo Buttons
-Hold the ‘T Button’ and the ‘(-)Select Button’ simultaneously for 1 second.
-Turbo will be automatically disabled if the power is off or disconnected.
STANDBY MODE
The controller is in wireless connection state and will automatically power
off after 5 minutes without any operation;
Press the 'Home Button' to wake up the controller.
HARD RESET
Find the small hole labeled ‘Reset’ on the back side of the controller.
Use a straightened paperclip to press the button. The controller will turn
off.
Press the ‘Home Button’ to turn the controller back on.
SAFETY INFORMATION
Use the product only as instructed. Read all instructions before
operating the product.
Do not disassemble any of the components.
Do not place or store the product in a humid area and do not
expose it to water or rain.
Failure to follow these directions may void the warranty.
SPECIFICATIONS
Input Charging Voltage
USB-C input 5V
Bluetooth Version
5.3
Connectivity Range
25ft
Battery
Charge Time
Approx 3hours
Cable Length
2.6ft (0.8M)
LEGAL NOTICES
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Warning : Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
FCC ID: WP8-NX-SWLCA
ONE-YEAR LIMITED WARRANTY
Visit www.next-accessories.com for details.
This product is not approved, endorsed or affiliated with Sony.
©2025. All Rights Reserved.
Made in China
English V1-24-1014
">
