Cave à vins
163 ou 168 bouteilles
CCAV168
CCAV163BZ
SAS CASSELIN
83 rue Marcel Mérieux 69960 Corbas FRANCE
Tél : +33 (0)4 82 92 60 00 - Mail : [email protected]
User Manual
Contents
1-
Structure
9
2-
Important safety instruction ----------------------------------- 10
3-
Wine cabinet installation --------------------------------------- 11
4-
Temperature setting
5-
Loading and storage of wine bottle -------------------------- 14
6-
Installation of handle
16
7-
Shelf changing
17
8-
Maintenance
18
9-
Technical Date
18
10- Trouble shooting
19
12
1
P2M069STD-VER.1.0
Explanation
This Instruction Manual is the universal-purpose
2
P2M069STD-VER.1.0
version for the model of wine cabinet manufactured
by our company.
The appearance of this units that you purchase might
be slightly different from the manual, but it does not
affect your properly to the specific model you choose,
and keep the manual properly so as to facilitate your
reference at late time.
This appliance is intended to be used exclusively
for the storage of wine.
3
P2M069STD-VER.1.0
Matters need attention
Waste disposal tips
Wrappage is used to protect electric appliance during transport
and every part of materials are recycled materials.
● Corrugated paperboard/paperboard (made from waste
paper)
●
Polystyrene block (foam fluoride-free polystyrene)
●
Plastic film, bag (polystyrene)
●
Packing string (polystyrene)
● Never let child play with packing materials, plastic film
may cause suffocation.
● Transport packing materials to public environmental
collection depot. Waste cold wine cabinet still has many
valuable raw materials and shall be treated separately in
residential area not adopting garbage classification.
● Waste cold wine cabinet shall be scraped timely; take off
plug, and remove power soft cable. Destroy lock to prevent
such situation that a kid is locked by him/herself when playing
the lock.
4
P2M069STD-VER.1.0
● Before sending the waste cold wine cabinet to public
collection depot, cold circulation system shall not be damaged
to ensure that the refrigerant and oil of cold wine cabinet
suffers no leakage.
● For situations on waste collection date and collection
depot, please consult with local environmental sanitation
department or government agency.
Warning
5
P2M069STD-VER.1.0
● Refrigerant and foam layer is flammable, Pay attention to
the fire when maintenance, installation, transportation and
handling. Used product need to be recycled by specialized
companies, do not arbitrarily discarded.
● It is prohibited to place the machine in a place where is
possible to leak corrosive and flammable gas, it is easy to
explode or damage the machine.
● The grounding wires cannot be connected with the gas
pipe, the water pipe system, the lightning rod and the
telephone. If ignore this, it will has the possibility to cause the
receiving an electric shock accident.
● Cannot lengthen the power cord without authorization,
meanwhile, this appliance couldn't share a socket with other
appliance, otherwise, it is easy to cause short circuit or damage
the electronic components.
● This product does not contain any spare parts, please do
not disassemble. The refrigerant used in this product is
combustible, non-professional maintenance personnel shall not
repair the machine, improper repair
may be the risk of fire or explosion. If the machine is faulty,
please contact the service personnel.
● This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
6
P2M069STD-VER.1.0
have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
● Children should be supervised to ensure that they do not
play with the appliance.
● If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in
order to avoid a hazard
● WARNING: Keep ventilation openings, in the appliance
enclosure or
in the built-in structure, clear of obstruction.
● WARNING: Do not use mechanical devices or other means
to accelerate
the defrosting process, other than those recommended by the
manufacturer.
●
WARNING: Do not damage the refrigerant circuit.
● WARNING: Do not use electrical appliances inside the
food storage compartments of the appliance, unless they are of
the type recommended by the manufacturer.
● WARNING: When positioning the appliance, ensure the
supply cord is not trapped or damaged
● WARNING: Do not locate multiple portable socket-outlets
or portable power supplies at therear of the appliance.
● Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance.
7
P2M069STD-VER.1.0
● The plug must can be accessible after the product
installed.
● DANGER: Risk of child entrapment. Before you throw
away your old: refrigerator or freezer:
*
Take off the doors.
*
Leave the shelves in place so that children may not easily
climb inside.
This appliance is intended to be used in household and similar
applications such as
● staff kitchen areas in shops, offices and other working
environments;
● farm houses and by clients in hotels, motels and other
residential type environments;
●
bed and breakfast type environments;
●
catering and similar non-retail applications.
● When the machine is installed, the left and right sides and
back must have more than 5cm of the heat dissipation space,
(Freestanding only) the machine can not store. flammable
items.
● During handling, be careful, do not carry from the front
and rear of the box, should be tilted from the left and right
sides, can not lie down to move the box.
8
P2M069STD-VER.1.0
1. Structure
(1)Up Hinge Cover
(2)Door Sealing
(3)Door Frame
(4)Door Handle
(5)Down Hinge
(6)Foot
(7)Hot Air Outlet
(8) Air inlet
(9)Control Panel(Down)
(10)Cold Air Outlet
(11)Rack
(12)Sensor Cap
(13)Control Panel(Up)
(14)Casing
9
P2M069STD-VER.1.0
2. Important Safety Instructions
Basic precautions when using,
(1) Only use your wine cabinet for intended purposes, as
described in this guide.
(2) Never unplug the wine cabinet by pulling out the power
cord, grip the plug firmly and pull straight out to remove from
wall socket.
(3) Immediately repair or replace any worn or damaged cord,
never use a cord that is split or which shows signs of wear along
its length or on its ends
(4) This appliance is not intended for use by
persons(including children)with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for
their safety
(5) Children should be supervised to ensure that they do not
play with the appliance, do not allow children to climb on, sit
on or stand on the wine cabinet, nor hang from its shelves.
They could damage the cabinet.
(6) Do not use an extension cord, do not operate this device
if its power cable or plug is damaged, if it does not work
properly or if it is damaged or has been dropped, If the power
cable is damaged. If the power cable is damaged, it will need to
10
P2M069STD-VER.1.0
be replaced by the manufacturer or his service agency or a
similar qualified person, to avoid any dangers.
(7)
Do not place other appliance inside the cabinet.
3. Wine cabinet Installation:
(1) When you receive the cabinet, make sure when you
unpack it there is no flaws in its external appearance
(from shocks, deformation, etc.)
(2) Open the door and check all interior fittings and supplied
items if are all complete (shelves, instruction, control
panel, etc.)Please install it according to the following
points if the shelves or shelf brackets fall off during transit.
(3) After checking, if no problem, then, pls carry to the final
place, which should be care as follows:
A. Leaving space of minimum 5cm between your wine
cabinet and left & right wall；at least 8cm between back
of cabinet and the wall.
B. Position the wine cabinet on a flat level surface, if not,
adjust the feet of wine cabinet to keep level.
(4) Away from sources of heat and high humidity areas
(laundry room and bathroom, etc).
(5) Do not tilt it at an angle of more than 45°when move
the cabinet.
Allow a minimum 10-minute interval between transit and
re-starting.
(6) Make sure the ventilation is free if you wish to install your
cabinet into a worktable, otherwise, it will reduce the
effect of usage.
11
P2M069STD-VER.1.0
(7) Please check the plug and cable before you connect the
power, then, make sure correct voltage of 220V240V/50Hz.
4. Temperature setting
4.1 The temperature setting of dual temperature wine cabinet
4.1.2 Temperature setting range for single temperature upright
cabinet is 5 c to 20 c the item is equipped whit a heater
system that s will works if the external ambient temperature
will going lower that the setting point request from customer.
Customer can set the inner temperature between the above
Temp. range for single and double temperature model , can be
a differences of some degrees from the top to the bottom of
the cabinet in terms of air temperature due the working ways
of compressor cycle, but the products temp. will be stable to
the setting point selected.
Note : double temp version have two thermostat where
customer can select two different inner temperature according
the kind of wine stored.
When Customer choose a setting point on the upper coldest
cabinet sector,
on the bottom warmest sector inner temp can be sets only by
choosing an upper setting point.
12
P2M069STD-VER.1.0
Example : if 10 C is sets on the coldest sector the warmest
sector setting point can start to be selected only from 10 C
degrees or above.
4.2.3 How to change setting point temperature
Pushing the bottom or the upper arrow one time and the
display will show you the current setting point , push and
release more time the arrow and the setting temperature will
change according. In order to records the new setting
temperature point do not operate or touch the display for 20
seconds.
4.2.4. Control panel for single zone and double zone Standby
button, by pushing the icon the compressor will be switch on
and off.
The displayed icon will blinking once the cooling its off and
permanent on when cooling cycle will be activated.
ON/OFF of the whole system
ON/OFF of inside cabinet LED light
Temperature UP setting
Temperature DOWN setting
13
P2M069STD-VER.1.0
5. Loading and storage of wine bottle:
5.1 Bottle loading method:
CCAV168
-
CCAV163BZ
• Wooden shelf capacity:11 bottles / shelf
• Bottom shelf capacity: 12 bottles / shelf
• Maintain a minimum 20mm between bottle and back
plate
• Ensure storage bottle Dia.78mm&hight
300mm,otherwise,less bottle loading
14
P2M069STD-VER.1.0
CCAV168
-
CCAV163BZ
• Metal shelf capacity:12 bottles / shelf
• Bottom shelf capacity: 12 bottles / shelf
• Maintain a minimum 20mm between bottle and back
plate
• Ensure storage bottle Dia.78mm&hight
300mm,otherwise,less bottle loading
15
P2M069STD-VER.1.0
5.2 Ensure bottle and shelf safety, check the following tips:
A. Spread your bottles out as evenly as possible over the
shelves, so weight is not concentrated in one point; and
make sure your bottles will not touch the back of the
cabinet.
B. Make sure bottles are not all grouped together at the top
or bottom of the cabinet
C. Following loading instructions provided in section
5.1,according to the type of storage fixtures with which
your cabinet is equipped, and never stack bottles on a
sliding shelf.
D. Due to humidity will be fluctuated based on room
humidity and temp. Please make special film to pack
before storage inside cabinet, which will ensure the label
of bottle could not be damaged.
6. Installing your handle
Install the handle according to the following four steps:
16
P2M069STD-VER.1.0
1. Move door seal out in the place of installing the handle
2. Take screws from manual bag & Put it in the appointed
place
3. Fasten door handle bye screwdriver
4. Refit the door seal to the relevant position
7. Shelf changing
Once shelf need to change, please check which kind of slider,
which used, two slider as follow firstly:
(A)
(B)
If slider is (A),then, only take out shelf and change another
new shelf, it will be ok. But please make sure the wood hole
need to match the slider hook.
If slider is (B),then, you need operate normal as below step:
1. Unscrew the wood shelf from slider
2. Take out the old wood shelf and change new one
3. Screw the wood shelf again from shelf bottom as
previous, then, it is ok.
17
P2M069STD-VER.1.0
8. Maintenance
In order to ensure best performance & long-last reliable
working item, please follow the simple maintenance and
cleaning operations as below:
− Make sure the power cord is unplugged before
cleaning the back of your cabinet, or before moving
it.
− Clean the inside of your cabinet thoroughly once a
year, after unplugging and unloading it(uses water
and a mild cleaning item, then rinse carefully).
− To assure that your wine cabinet provides longlasting reliable performance, you should check it
regularly and inform your dealer if anything unusual
is found.
9. Technical Data:
18
P2M069STD-VER.1.0
10. Trouble shooting
Problem
No working
Cooling problem
Noisy
Solution
Plug or not
Fuse break
No power
Heat source near the item
Ventilation not well
Door close not well or door
open too long
Door sealing problem or
deformation
Bottles loading too much in
same shelf
Air inlet or outlet block
Control setting problem
Ventilation space in the right
& left casing not enough
Wine cabinet placed not flat
Item touch the wall
Some parts loose or taken off
If still have problem after checking above, please try to contact
service center or dealer.
Note: normal operation for following phenomenon:
A) Compressor no start:
Compressor will not start I room temperature is lower
than desired temperature, but item is still working with
heater inside till desired temperature achieved.
19
P2M069STD-VER.1.0
B) Compressor re-start
Compressor will stop working when cooling system in the
cabinet reaches presetting temperature, and re-start
working until the desired temperature is achieved. Allow
a minimum 5 minute interval before re-starting.
C) Dew on the surface of cabinet:
The surface of wine cabinet especially the glass door
appears some frost if item in a damp room. This is due to
the moisture in the air coming into contact with the
cabinet. Please wipe it away dry cloth.
D) Normal operating sounds you may hear
Boiling water, gurgling sounds or slight vibrations that the
result of the refrigerant circulating through the cooling
coils.
Popping or crackling noises due to the auto defrost cycle
melting frost build-up.
Liquid sound:
(1) The sound of compressor when starts or stops
working
(2) The flowing sound of refrigerant in the refrigeration
system
(3) The evaporating sound of refrigerant in the
evaporator
E) Condensation formed inside the cabinet
Under the environment with high level of humidity or the
door of wine cabinet has been left open for a long period
or opened frequently ,there are much condensation, and
pls wipe off the water from the door and walls and leave
the door closed as long as possible.
20
P2M069STD-VER.1.0
F) Heat function on bottom zone:
Heat function o bottom zone will automatically be on as
below reason.
a) When setting temp. is upper than room temp.
b) When inside bottom temperature is lower than
setting temp.
G) Indicator light:
When temperature inside cabinet is out of range of
setting temperature, both up and down indicator light will
be on. Once temperature reaches setting temperature,
then, this light will be off automatically.
21
P2M069STD-VER.1.0
">
