Studebaker SB6077 User Manual

WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer‟s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that product heat.
9. AC adapter is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the AC
adapter should be disconnected from the mains socket outlet completely.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with a cart, stand, tripod, bracket, or table recommended by
the manufacturer, or sold with the product. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
12. Unplug this apparatus during lightning storms or when unused for a
long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
14. This appliance shall not be exposed to dripping or splashing water and that no object filled
with liquids such as vases shall be placed on the apparatus.
15. Do not overload wall outlet. Use only power source as indicated.
16. Use replacement part as specified by the manufacturer.
17. Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
18. Power Sources - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your home,
-1-
consult your product dealer or local power company.
19. Object and Liquid Entry - Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
20. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
• If liquid has been spilled, or objects have fallen into the product,
• If the product has been exposed to rain or water,
• If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
• If the product has been dropped or damaged in any way, and
• When the product exhibits a distinct change in performance - this indicates a need for
service.
21. Excessive sound pressure from earphones and headphone can cause hearing loss
22. Minimum distances of 10 cm around the apparatus for sufficient ventilation.
23. The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
24. No naked flame sources, such as lighted candles, should be placed on the apparatus.
25. The use of apparatus in moderate climates.
26. The Rating Plates are located at the bottom enclosure of the turntable and rear enclosure
of the speaker units.
SAVE THESE INSTRUCTIONS
COMPLIANCE WITH FCC REGULATIONS
FCC ID : 2ANSA-CA082B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
 Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance
could void the user‟s authority to operate the equipment.
-2-
DEAR STUDEBAKER® CUSTOMER
Selecting fine audio equipment such as the unit you‟ve just purchased is only the start of your
musical enjoyment. Now it‟s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association‟s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time your hearing
“comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud
and harmful to your hearing. Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:

Start your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or
loss in the future. After all, we want you listening for a lifetime.
We Want You Listening For a Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun
and enjoyment. Since hearing damage from loud noise is often
undetectable until it is too late, this manufacturer and the Electronic
Industries Association‟s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise.
Customer’s Record:
The serial number of this product is found on its bottom cover. You should note the serial number of
this unit in the space provided as a permanent record of your purchase to aid in identification in the
event of theft of loss.
Model Number: SB6077
Serial Number: __________________
PROTECT YOUR FURNITURE!!
The Turntable and Speakers of this system are equipped with non-skid rubber „feet‟ to prevent the
product from moving when you operate the controls. These „feet‟ are made from non-migrating rubber
material specially formulated to avoid leaving any marks or stains on your furniture. However certain
types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber
„feet‟ to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your
furniture we strongly recommend that you purchase small self-adhesive felt pads, available at
hardware stores and home improvement centers everywhere, and apply these pads to the bottom of
the rubber „feet‟ before you place the product on fine wooden furniture.
CONTENTS OF YOUR PRODUCT
Turntable unit
Detachable Dust Cover
45 RPM Adapter
Platter Felt Mat
2-way Active Speaker System (Left and Right Speakers)
AUX IN Cable (with RCA plugs)
AC Adapter for Turntable (DC9V
1.5A
)
AC Adapter for Active Speaker System (DC15V
3A
User Manual
-3-
)
x 1 set
x 1 pc
x 1 pc
x 1 pc
x 1 set
x 1 set
x 1 pc
x 1 pc
x 1 set
LOCATION OF CONTROLS
TURNTABLE UNIT (TOP VIEW)
1
PART NAME
45 RPM ADAPTER
2
3
4
5
6
PLATTER
CENTER SPINDLE
PLATTER FELT MAT
CONTROL PANEL
CARTRIDGE
7
ANTI-SHOCK LOCK
DOWN SCREW
8
COUNTERWEIGHT
9
CUE LEVER
10 TONEARM HOLDER
11 SPEED SELECTOR
12 TONEARM
13 HEADSHELL
14 PITCH CONTROL
DESCRIPTIONS
Use this Adapter when playing vintage 45RPM records with a 1.5” (38mm) center
opening.
This is the rotating part of the Turntable.
The center hole of the vinyl record to be played should align with this SPINDLE.
This is for covering the platter and on which the vinyl record is placed.
The major electronic controls and indicators can be found on this panel.
An Audio Technica AT3600LA Moving Magnet Cartridge (MMC) is pre-installed.
Please remove the original protective plastic cover from the stylus before use and
replace it after playing records for maximum protection.
This Screw has been loosened in factory to lock down the Anti-shock mechanism
of the Turntable to protect it from damage during transit. Please turn it in a
clockwise direction until the screw is all the way down to reactivate the Anti-shock
mechanism before first use. If the unit is not to be used for a long time, loosen the
Screw until the Anti-shock mechanism of the Turntable is locked down again.
This rotary part is used to set the tracking force required by different cartridges.
It should be kept at the 2.5g scale reading point for the included cartridge.
Use this to control the precise lead-in point of a chosen sound track on the record.
Gently pull the Lever towards yourself to lower the stylus onto the record surface
and push towards the rear end to raise the stylus above it.
When not using the Phono function, the TONEARM should be returned onto this
HOLDER and locked in placed by the built-in locking clip.
Use this Selector to choose between 33 and 45 RPM according to your vinyl
record requirement.
This is a metal tubing carrying the HEADSHELL and CARTRIDGE assembly.
This is the part on which the CARTRIDGE (MMC) is fixed to with a small screw.
Use this control to vary the pitch of the phono audio output by means of changing
the motor speed. The center click denotes the point of neutral pitch. Rotate to the
right side of the center click to increase pitch and vice versa.
-4-
CONTROL PANEL
PART NAME
DESCRIPTIONS
15 STANDBY / FUNCTION Press it once to turn ON the Turntable unit. Press it repeatedly to cycle through
BUTTON
the PHONO, BLUETOOTH and USB functions. Corresponding LED indicators
will light.
In BT pairing mode, press it for fast pairing.
16 PLAY PAUSE /
BT PAIR BUTTON
In BT/USB modes, press it to control play and pause of the playing song.
In BT/USB modes, press it to skip back to previous track.
17 SKIP BACKWARD
BUTTON
This port accepts a standard USB flash drive (not included) up to 64GB
18 USB PORT
capacity.
Press it to activate the Phono Record function.
19 RECORD BUTTON
This function can only be used in the USB playback mode.
20 REPEAT BUTTON
Press it once to choose Repeat 1 playing mode to play the current song
repeatedly.
Press again to choose Repeat All playing mode to play all compatible MP3 songs
on the USB flash drive. Songs in the root directory will be played back first and
then those in other folders will follow.
In BT/USB modes, press it to skip forward to next track.
21 SKIP FORWARD
BUTTON
For Repeat 1 mode, the indicator will flash once per second.
22 REPEAT INDICATOR
For Repeat All mode, the indicator will flash once per 2 seconds.
The LED will light in red when the Phono function is activated.
23 PHONO INDICATOR
24 BT INDICATOR
The LED will light in blue when the BT function is activated.
The LED will light in red when the USB function is activated.
25 USB INDICATOR
26 RECORD INDICATOR The LED will light in red when the Phono Record function is activated.
-5-
TURNTABLE UNIT (REAR VIEW)
PART NAME
DESCRIPTIONS
27 DETACHABLE
DUST COVER
28
29
30
31
32
This cover should be installed before first use. It should be kept closed to keep out
dust and foreign objects from falling onto the record surface and cartridge while the
record is playing.
PHONO OUT
Connect this set of color-coded RCA cables ONLY to the corresponding color-coded
CABLE
PHONO IN JACKS on the rear panel of the right speaker.
The blue plug denotes the R channel and yellow denotes the L channel.
PHONO MODE
Use this selector to choose Phono Out or Phono Record mode. Normally, it should be
SELECTOR
left in the Phono Out position. Switch to Phono Record position only if you want to
encode your record sound tracks into MP3 files.
LINE OUT JACKS Connect this set of color-coded RCA cables to the corresponding color-coded
PHONO IN JACKS on the rear panel of the right speaker.
The red plug denotes the R channel and white denotes the L channel.
DC JACK
Connect the 3.5mm DC plug of the smaller AC ADAPTER (DC9V
1.5A
)
securely into this JACK.
LEFT SPEAKER Connect the red RCA plug of this cable to the corresponding single red color-coded
CABLE
jack on the rear panel of the right speaker.
ACTIVE SPEAKER SYSTEM (RIGHT SPEAKER)
-6-
PART NAME
33 VOLUME
CONTROL
(HIDE & EJECT
STYLE)
34 PHONO IN
JACKS
35 LINE IN JACKS
36 LEFT SPEAKER
OUTPUT JACK
37 DC JACK
38 POWER
INDICATOR
39 POWER ON/OFF
BUTTON
DESCRIPTIONS
The VOLUME CONTROL is normally flush with the top panel of the RIGHT
SPEAKER. Press it once to eject and expose the VOLUME CONTROL knob. Rotate
the VOLUME CONTROL clockwise to increase the audio output level and
counterclockwise to decrease the audio output level. Press it again to hide.
This pair of RCA INPUT JACKS accepts ONLY the PHONO OUT CABLE RCA plugs
from the Turntable unit. The blue color-coded RCA Jack denotes the R channel while
the yellow denotes the L channel.
This pair of RCA INPUT JACKS accepts ONLY the LINE OUT CABLE RCA plugs
from the Turntable unit. The red color-coded RCA Jack denotes the R channel while
the white denotes the L channel.
This single RCA OUTPUT JACK accepts ONLY the red RCA plug from the LEFT
SPEAKER
Connect the 5.5mm DC plug of the bigger AC ADAPTER (DC15V
3A
)
securely into this JACK.
The LED will light in red when the ACTIVE SPEAKER SYSTEM power is turned ON.
Press it once to turn ON the ACTIVE SPEAKER SYSTEM. Press it again to turn OFF.
IMPORTANT NOTES
Avoid installing the unit in locations described below:

Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.

Places exposed to high levels of electromagnetic interference such as microwave ovens,
fluorescent lamps or WiFi routers.

Dusty, humid or moist places.

Places subject to constant vibrations.
POWER SOURCE
This Unit is designed to only operate on AC adapters (included) that run on normal 120V~ 60Hz
household power. Do not attempt to operate the unit using any other power source. You could cause
damage to the unit and void your warranty.
GETTING STARTED
SETTING UP THE PHONO TURNTABLE
1. Install the DETACHABLE DUST COVER by aligning the hinges to the dedicated sockets on the
Turntable unit and snap in fully.
2. Remove the cable tie securing the TONEARM.
3. Adjust the COUNTERWEIGHT at the far end of the TONEARM to the required tracking force of
2.5 grams if necessary.
4. Remove the original protective plastic cover from the STYLUS and keep it for replacement after
playing records or before changing the CARTRIDGE in future.
CABLE CONNECTION
1. Plug the smaller AC Adapter (DC9V
1.5A) into the DC Jack of the Turntable unit.
2. Plug the bigger AC Adapter (DC15V
3A) into the DC Jack of the Right Speaker unit.
3. Connect RCA “PHONO OUT” cable, RCA “LINE OUT” cable and RCA “Left Speaker” cable between
the Turntable and Right Speaker as shown below:
-7-
ANTI-SHOCK LOCK DOWN SCREW
The turntable on this unit features a built in Anti-Shock system. The turntable is locked down when
shipped from the factory. Turn the ANTI-SHOCK LOCK DOWN SCREW in a clockwise direction to
release the turntable and activate the anti-shock feature before operating the turntable.
ACTIVE SPEAKER OPERATION
1. Before turning ON the system, always remember to turn down the volume level using the
VOLUME CONTROL to avoid possible damage to the speakers due to sudden bursts of high
audio output.
2. Press the POWER ON/OFF BUTTON on the rear panel once to turn ON the Active Speaker
System, the POWER INDICATOR will light.
3. The VOLUME CONTROL is normally flush with the top panel of the RIGHT SPEAKER. Press it
once to eject and expose the VOLUME CONTROL KNOB. Rotate the VOLUME CONTROL
clockwise to increase the audio output level and counterclockwise to decrease the audio output
level. Press it again to hide.
4. As the Speaker System does not have a sleep mode, please turn it OFF manually after use by
pressing the POWER ON/OFF button to conserve electrical energy. The POWER INDICATOR will
turn OFF.
TURNTABLE UNIT OPERATION
1. Press STANDBY/FUNCTION BUTTON once to switch ON the Turntable unit.
2. Press the STANDBY/FUNCTION BUTTON again to select PHONO/ BLUETOOTH/USB function.
Corresponding indicator will light.
3. As the Turntable unit does not have a sleep mode, please turn it OFF manually after use by
pressing the POWER ON/OFF BUTTON to conserve electrical energy. All function indicators will
turn OFF.
PLAYING VINYL RECORDS
1.
2.
3.
4.
5.
6.
7.
8.
Check that the PHONO MODE SELECTOR at the rear panel of the Turntable unit is set to the
“PHONO OUT”, otherwise no sound can be heard.
Open the Dust Cover.
Remove the original plastic stylus protector from the STYLUS and release the Locking Clip of the
TONEARM HOLDER to free the TONEARM.
Choose "PHONO" function by pressing the FUNCTION BUTTON on the Turntable front panel.
Place a record on the PLATTER over the CENTER SPINDLE.
Set the SPEED SELECTOR to 33 or 45 rpm according to the record requirement.
Place the included 45 RPM ADAPTER over the CENTER SPINDLE when playing vintage 45
RPM records.
Raise the TONEARM using the CUE LEVER and move the TONEARM to the beginning of the
record or to the beginning of a particular track. Use the CUE LEVER to lower the TONEARM
-8-
STYLUS onto the record to start playing.
9. Adjust the audio output level using the VOLUME CONTROL to obtain a comfortable listening level.
10. Thanks to the auto return feature, the Turntable will automatically stop and return to the
TONEARM HOLDER when the last track of the record has finished playing.
11. To stop the record before it ends, lift the TONEARM using the CUE LEVER and return it carefully
to the home position and use the CUE LEVER to lower the TONEARM onto the TONEARM
HOLDER.
12. Replace the original protective plastic cover onto the STYLUS when not in use.
Important Notes:


Do not turn the PLATTER manually or in a counterclockwise direction to avoid damage.
Moving or jarring the Turntable without securing the Locking Clip of the TONEARM HOLDER
could result in damage to the TONEARM.
PITCH CONTROL
The PITCH CONTROL allows you to vary the pitch of the phono audio output by means of changing
the motor speed of the record once the correct speed (33/45 RPM) is chosen. The center click denotes
the point of neutral pitch. Rotate to the right side of the center click to increase the pitch and to the left
side of the center click to decrease the pitch.
ENCODING RECORD TRACKS INTO MP3 FILES
You can convert your favorite vinyl record sound tracks into MP3 files which are saved on a USB Flash
Drive via the USB PORT located on the front panel.
1. Press the FUNCTION BUTTON to select “PHONO" function and the PHONO INDICATOR will
light steadily.
2. Set the PHONO MODE SELECTOR at the rear panel of the Turntable to “PHONO OUT” position.
3. Set up the vinyl record track that you want to record using the CUE LEVER to position it at the
starting point and suspend playing.
4. Set the PHONO MODE SELECTOR to “PHONO REC” position.
5. Press RECORD BUTTON to set up the MP3 encoding process in 1 to 2 seconds. When the
RECORD INDICATOR lights, the system is ready to start MP3 encoding.
6. Start playing the selected song you want to record by lowering the CUE LEVER.
7. When the end of the current song is reached, press the RECORD BUTTON to stop encoding and
the RECORD INDICATOR will turn OFF. The corresponding MP3 file will be saved in a new folder
named “audio” in the USB flash drive.
8. To encode more sound tracks, please repeat steps #2 thru #7 above, otherwise all songs on the
vinyl record will be encoded into one single MP3 file. Advanced auto track separation feature is
not supported.
Note:
The flash drive (not included) must be formatted in FAT32 file system and the maximum supported
capacity is 64GB. High speed flash drives are recommended for smooth encoding.
PLAYING SONGS ON A USB FLASH DRIVE
1. Insert your USB Flash Drive with MP3 songs into the USB PORT located on the front panel.
2. Press FUNCTION BUTTON to select “USB” function. The USB INDICATOR will light and then it
will start playing automatically in about 1 to 5 seconds.
3. Press PLAY/PAUSE
BUTTON to control play/pause.
4. Press SKIP FORWARD
BUTTON to skip to next song and SKIP BACKWARD
BUTTON
to skip to previous song.
5. Press REPEAT BUTTON once to repeat the current song (Repeat 1). The REPEAT INDICATOR
will flash once per second (fast flashing).
6. Press REPEAT BUTTON again to repeat all tracks (Repeat All). The REPEAT INDICATOR will
now flash slower, once per 2 seconds (slow flashing).
7. Press REPEAT BUTTON again to cancel repeat mode. The REPEAT INDICATOR will now turn
-9-
OFF.
Notes:
 MP3 files located in the root directory of the USB flash drive will play first.
 If repeat mode is OFF, the unit will stop playing at the end of the last song in the playlist.
 Do not remove the USB Flash Drive while playing to avoid damage.
PLAYING SONGS FROM A BLUETOOTH DEVICE
PAIRING A SMARTPHONE OR BLUETOOTH ENABLED DEVICE
1.
2.
3.
4.
5.
6.
7.
8.
Press the FUNCTION BUTTON to select the “BLUETOOTH” function.
The SB6077 unit will start searching for a previously paired device that is active and in range. If no
active device is found within 15 seconds, the Speakers will emit a low level alert beep tone.
To establish a new link, turn on the Bluetooth function of your Bluetooth enabled device and
enable the search or scan feature to find “SB6077” in the list of discoverable Bluetooth devices.
Select the “SB6077” from your active device list when it appears on its screen.
Press PAIR BUTTON on the front panel if auto pairing does not happen. After successfully pairing
and connecting your device with SB6077, you can now play music from your Bluetooth enabled
device wirelessly to the SB6077.
Rotate the VOLUME CONTROL on the Active Speaker to increase the listening volume gradually
until a comfortable listening level is reached.
Press PLAY/PAUSE
BUTTON to control play/pause.
Press SKIP FORWARD
BUTTON to skip to next song and SKIP BACKWARD
BUTTON
to skip to previous song.
Notes:
 If you want to connect the SB6077 to another new external Bluetooth enabled device while paired
with another device, you need to turn off the Bluetooth function of the paired external device first
before repeating steps #3 to #5 above to make a new link.
 If you need to switch between different paired devices that are all in range and with Bluetooth
functions enabled, the Bluetooth function of the current connected device must be turned off first
to release the SB6077 system for an alternative Bluetooth connection.
 Refer to manual of your smartphone or external Bluetooth enabled device for correct Bluetooth
operation instructions since it may vary from model to model.
 If your Bluetooth enabled device does not support A2DP, it will not play the music through the
SB6077 system even after it is paired and connected successfully.
 If you are pairing and connecting your personal computer to the SB6077 using Bluetooth, you may
need to set the SB6077 as your computer‟s default sound device.
RE-LINKING TO A SMARTPHONE OR BLUETOOTH ENABLED DEVICE
Even if your smartphone or Bluetooth device is already paired with the SB6077 and with both
Bluetooth functions turned on, they can become unlinked at some point due to intentional manual
disconnection or undesirable external signal interferences or over-range for more than 10 seconds. If
this happens, the Turntable unit will emit a low level alert beep tone. You can re-link them and resume
play by:
1. Select “SB6077” from the device list on your smartphone or Bluetooth device. The SB6077 should
re-link to your Bluetooth enabled device within 5 seconds.
2. Tap the play button of the music player on your Bluetooth enabled device to resume playback.
ENCODING BLUETOOTH TO MP3
You can convert your favorite music tracks in your Bluetooth device into MP3 files which are saved on
a USB Flash Drive via the USB PORT located on the front panel.
1. Set the PHONO MODE SELECTOR at the rear panel of the Turntable “PHONO OUT” position.
2. Select the song you want to encode to MP3 file on your Bluetooth device and pause it at the
starting point.
- 10 -
3.
Press RECORD BUTTON to set up the MP3 encoding process. When the RECORD INDICATOR
lights, the system is ready to start MP3 encoding.
4. Play the selected song at maximum undistorted volume in order to keep the encoded song loud
and clear.
5. When the end of the current song is reached, press the RECORD BUTTON to stop encoding and
the RECORD INDICATOR will turn OFF. The corresponding MP3 file will be saved in a new folder
named “audio” in the USB flash drive.
6. To encode more sound tracks, please repeat steps #2 thru #5 above, otherwise all songs on the
Bluetooth device playlist that have been played will be encoded into one single MP3 file. Advanced
auto track separation feature is not supported.
Note:
The flash drive (not included) must be formatted in FAT32 file system and the maximum supported
capacity is 64GB. High speed flash drives are recommended for smooth encoding.
CARTRIDGE AND STYLUS REPLACEMENT
(FOR EXPERIENCED USERS ONLY!)
As the stylus gradually wears after playing a considerable period of time, the sound quality will
deteriorate and it is time to replace the STYLUS. In addition, if the CARTRIDGE is damaged by
accident, it can also be readily replaced by following the instructions below:
CARTRIDGE REPLACEMENT
Before proceeding, please replace the original protective plastic cover onto the STYLUS.
STYLUS REPLACEMENT
To remove the old stylus (needle), hold the cartridge in one hand, grasp the
plastic stylus housing with thumb and forefinger, and pull away from the
cartridge. The stylus assembly comes away at a slight angle, as indicated by
the arrow in the diagram. To install the replacement stylus, insert the new
stylus assembly into the cartridge at a slight angle, so the hook at the end of
the stylus fits into the slot in the cartridge body. The stylus assembly should
click into place when fully seated in the cartridge. The stylus must be fully
seated in the body for proper operation. Spare stylus, type ATN3600 (not
included), can be purchased separately at leading HiFi equipment stores and
online.
Notes:
 Put the original protective plastic cover back onto the STYLUS to avoid accidental damage to the
STYLUS TIP while replacing the CARTRIDGE.
 Replace only with the specified type of stylus.
 Spare stylus or cartridge is not included with your product.
- 11 -
CARE AND MAINTAINENCE


To prevent fire or shock hazard, disconnect your unit from the AC Adapters when cleaning.
The glossy finish on the Turntable unit and Speaker boxes may only be cleaned with a high quality
microfiber lens cleaning cloth (not included) and cared for as other expensive furniture. Use extra
caution when cleaning and wiping the glossy finished parts. Never use any wax or polish sprays
on these parts to avoid causing permanent damage.
 If you intend to move the Turntable unit and/or the Speaker boxes to a new location, always try to
wear a pair of soft cotton gloves (not included) first. Always grip the Turntable unit by its side
panels and the Speaker box by its bass reflex opening and its base.
 Always disconnect all the attached cables from the Turntable and Speaker units before relocating
them.
Caution: Never allow any water or other liquids to get inside the units while cleaning.
RECORD CARE AND MAINTENANCE
To ensure the best sound and the least amount of wear on your records, it is essential that they are
kept clean. Make sure your records, especially older ones are sufficiently cleaned prior to playing
them.
Thoroughly clean dust off the stylus and record regularly.
 Use a soft brush to clean the stylus. Brush from the base to the tip as shown below.

For records with only light amounts of dust, we recommend brushing them off with a carbon fiber
brush or velvet pad before playing them. Use a good quality record cleaner and brush set to
keep your records clean. Studebaker models SB450 and SB445 are available online. Other
carbon fiber brushes, velvet pads and record cleaning kits are available online or in local record
stores.

Using a mild dish soap and warm water for washing your records will also help remove excess
dirt and dust that builds up over the years. Use a microfiber cloth when washing and wiping off
any excess water from the record once they have been cleaned.
Note:
Remember, the best cleaning in the world just removes all the dust and dirt. Some records will have
- 12 -
scratches and groove wear. No amount of cleaning will fix this. So after cleaning, some records may
sound “perfect” and others may not.
TROUBLESHOOTING GUIDE
Should you experience difficulties in the use of this turntable system please refer to the following chart
or call 1-800-777-5331 for Customer Service.
SYMPTOM
The Turntable does
not respond and
there is no
PHONO/BT/USB
indicator light.
No sound from the
Speakers
No sound from the
Left Speaker
The sound output is
abnormal (sounds
unnatural or weak
bass output)
Sound is distorted
POSSIBLE PROBLEMS
AC Adapter is not plugged
into a wall outlet properly
Wall outlet is not
functioning.
SUGGESTED SOLUTIONS
Plug the AC Adapter into a working AC wall
outlet securely.
Plug another device into the same outlet to
confirm the outlet is working.
The VOLUME CONTROL is
turned fully
counterclockwise (minimum
position).
The Speaker System is
OFF.
Turn the VOLUME CONTROL clockwise
slowly to increase the volume.
The active function is not
set to the correct signal
source.
Signal cables at the rear
panels of the Turntable and
Right Speaker are not
connected properly
The Left Speaker cable is
not properly connected to
the dedicated jack on the
Right Speaker.
The L and R terminals of
the Amplifier AUX IN
terminals and external
source outputs are
reversed.
The positive and negative
terminals of the Amplifier
Speaker Outputs and
Speaker unit Inputs are
reversed.
Volume level is too high.
Sound source is distorted.
Cannot pair with a
new Bluetooth
enabled device
An active paired Bluetooth
device is already connected
to SB6077 system.
- 13 -
Press the Power ON/OFF button on the rear
panel of the right speaker until the red Power
Indicator is ON.
Check that the correct function is set to the
corresponding input signal source.
Check that the signal cables are connected
correctly.
Reconnect the LEFT SPEAKER CABLE to the
correct RCA connector on the RIGHT
SPEAKER.
Remove the connecting cables between the
Amplifier AUX IN terminals and your external
source and re-connect them correctly and
securely.
Remove the speaker cables and re-connect
them correctly and securely.
Turn volume down until sound quality returns
to normal.
Low bitrate MP3 audio files are of relatively low
quality and may sound worse on a quality
system. Suggest to try higher bitrate MP3
music files for USB source or lossless digital
music files for external Bluetooth enabled
devices.
You need to turn off the Bluetooth function of
the currently connected external Bluetooth
device so as to release the SB6077 system for
a new pairing and connection.
SPECIFICATIONS
TURNTABLE SECTION
Cartridge
Replacement Stylus
Turntable Speed
Pitch Control
Input Modes
Bluetooth Version
AC Adapter :
ACTIVE SPEAKER SECTION
Audio Output Power
Speaker Output Impedance
Tweeter
Woofer
AC Adapter
Audio Technica AT3600LA (Moving Magnet type)
ATN3600
2 speeds: 33 and 45 RPM
Approx. +/-8% (with center click)
Phono / Bluetooth / USB
Bluetooth v2.1+EDR
Input: AC 120V~ 60Hz
Output: DC9V
1.5A
15W rms x 2 @THD10% at 1kHz per channel
6Ω
8Ω 5W max, Ø1”
6Ω 25W max, Ø4”
Input: AC 120V~ 60Hz
Output: DC15V
3A
USB FLASH DRIVE REQUIREMENT
64 GB max. (in FAT32 file format)
MP3 ENCODING PARAMETERS
44.1kHz sampling frequency / 128kbps constant bitrate
At Spectra, environmental and social responsibility is a core value
of our business. We are dedicated to continuous implementation
of responsible initiatives with an aim to conserve and maintain the
environment through responsible recycling.
Please visit us at http://www.spectraintl.com/green.htm for more
information on Spectra‟s green initiatives or to find a recycler in your area.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Spectra Merchandising Intl, Inc. is under license. Other trademarks and trade
names are those of their respective owners.
- 14 -
90 DAY LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A. ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective
materials or factory workmanship for a period of 90 days from the date of original customer purchase
and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof,
except batteries, when it is returned to the SPECTRA Service Department, accompanied by proof of
the date of original consumer purchase, such as a duplicate copy of a sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If
the product is repaired or replaced under warranty, the return charges will be at SPECTRA‟s expense.
There are no other express warranties other than those stated herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is demonstrated.
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the
descriptions and warnings covered within the user manual or non-SPECTRA approved
modifications.
c. Claims are made within the warranty period.
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in
compliance with electrical codes or SPECTRA user manual specifications, or failure to provide
reasonable care and necessary maintenance as outlined in the user manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when products are
used in a nonresidential environment or installed outside the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and
send it freight prepaid to SPECTRA at the address shown below. IF THE UNIT IS RETURNED
WITHIN THE WARRANTY PERIOD shown above, please include a proof of purchase (dated cash
register receipt) so that we may establish your eligibility for warranty service and repair of the unit
without cost. Also include a note with a description explaining how the unit is defective. A customer
service representative may need to contact you regarding the status of your repair, so please include
your name, address, phone number and email address to expedite the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $80.00 to cover the
cost of repair, handling and return postage. All out of warranty returns must be sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at
[email protected] for updated information on the unit requiring service. In some cases the
model you have may be discontinued, and SPECTRA reserves the right to offer alternative options for
repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL 60634, USA.
1-800-777-5331
To register your product, visit the link below to enter your information.
http://www.spectraintl.com/wform.htm
0917
Printed in China
- 15 -
">