Operating Instructions
Dishwasher
Dear Customer,
Thank you for choosing this quality product from ASKO.
We hope it will meet your expectations and fulfil your needs for many years to come.
Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world.
To get the most from your new dishwasher, we recommend that you read the operating instructions before using the dishwasher. The operating instructions also include information on how you can help protect the environment.
ASKO D5644
Operating Instructions
2
Contents
Read the operating instructions
Be careful with certain materials
Checking water hardness
Program key
General
Installation
Winter storage/Transport
Overflow guard function
Cleaning
Packing material
Disposal
Child safety and dishwashing
Activate the child safety lock
Activate child lock (button lock)
Load the baskets correctly
Check that the spray arms can rotate freely
Add detergent
Press the main power switch until the display lights up
Select the program
Select options
Press Start/Stop and close the door
After dishwashing
18
19
20
21
22
15
15
18
13
14
14
7
10
11
12
5
6
4
4
4
4
5
5
5
4
4
4
3
4
3
3
3
3
14
14
Safety instructions
Suggested machine installations
Adjust the height and slide the dishwasher into place
Drainage connection
Connection to water supply
Electrical connection
Adjusting the plinth (only when using toe kick accessory)
Set the correct plinth depth as follows
Screwing the dishwasher into place
34
35
36
36
36
32
32
33
25
26
27
30
37
37
38
40
Before washing for the first time
Read the operating instructions
Read through the operating instructions before using
the dishwasher, especially the sections Safety
instructions, Child safety and Dishwashing.
Be careful with certain materials
Read the section Fragile dishes before dishwashing
porcelain with unglazed decoration or other utensils made from plastic, wood or crystal that you value.
Checking water hardness
Contact the local water utility to check the water hardness in your area. This is important with regard to how much detergent and rinse aid to use.
Program key
Some dishwashers include program keys in different languages. Attach the program key in the desired language to the top of the door.
3
4
Safety instructions
General
• Read the operating instructions and keep them in a safe place!
• Never use the dishwasher for any purpose other than that specified in these operating instructions.
• Do not load the dishwasher door or dishwasher baskets with anything other than dishes.
• Never leave the dishwasher door open as someone may trip on it.
• Use only dishwasher detergent!
• Place knives and other sharp items so that they cannot harm anyone or damage the dishwasher.
• The machine is not designed to be used by persons (even children) that are physically or mentally handicapped or lack experience and knowledge. Such persons must receive instruction in how to use the machine from the person responsible for their safety.
• Damaged mains cables must only be replaced by a qualified electrician.
• This dishwasher is for household or similar use, such as:
staff kitchens in shops, offices and other workplaces.
farms.
for guests at hotels, motels and other types of accommodation.
bed & breakfast hotels.
• Never place dishes with solvent residues in the dishwasher due to the risk of explosion. Nor may dishes that contain ash, wax or lubricants be washed in the dishwasher.
• Young children should be supervised to ensure that they do not play with the appliance.
• The appliance is not intended for use by young children or infirm persons without supervision.
Installation
See the section Installation.
Winter storage/Transport
• Store the dishwasher where the temperature remains above freezing.
• Avoid long transport distances in very cold weather.
• Transport the dishwasher upright or laying on its back.
Overflow guard function
The overflow protection starts pumping out the machine and turns off the water supply if the water level in the dishwasher exceeds the normal level. If the overflow protection is triggered, turn off the water supply and call the service division.
Cleaning
When cleaning the edge around the door, use only a slightly damp cloth. Do not spray water around the edge! Moisture can make its way into the lock, which contains electrical components.
Packing material
Sort waste materials in accordance with local guidelines.
Disposal
• When the dishwasher has reached the end of its service life and is to be disposed of, it should immediately be made unusable. Pull out the power cable and cut it as short as possible.
• The dishwasher is manufactured and labelled for recycling.
• Contact your local authority for information about where and how your dishwasher should be correctly recycled.
Child safety
Child safety and dishwashing
• Use the knife basket, or knife stand, for all long/sharp items.
• Always close the door and start the program immediately after you have added the detergent.
• Keep children away from the dishwasher when the door is open. Some detergent may remain inside!
• Do not allow children to use or play with the dishwasher. Be especially vigilant when the door is open.
WARNING!
Children must be supervised – dishwasher detergent is corrosive!
Store detergent and rinse aid out of the reach of children! If anyone swallows dishwasher detergent, they should immediately drink one or two glasses of milk or water. Do not attempt to induce vomiting.
Contact a doctor! If anyone gets dishwasher detergent in their eyes, rinse (for at least 15 minutes) with plenty of water.
WARNING!
Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.
Check that the detergent compartment is empty after completion of the wash cycle.
Activate the child safety lock
(only certain models)
A child safety lock is fitted to prevent children from opening the dishwasher door. To activate the child safety lock, press in the door latch and use a screwdriver to turn the screw slot (top left-hand corner) to a vertical position. To open the door, you must press the white plastic catch (illustrated below) to the left while pressing the door latch up. Reset by turning the screw slot back to a horizontal position.
Locked
Open
Activate child lock (button lock)
You can activate the child lock (button lock) to prevent children from starting the dishwasher (see the section
Settings).
5
Dishwasher components*
1
1.
2.
3.
4.
5.
Knife basket
Filters
Cutlery basket
Detergent compartment
Upper basket
2
3
4
5
6
7
6
8
9
6.
7.
8.
9.
10.
10
Spray arms
Serial number plate
Lower basket
Rinse aid compartment
Panel
6
*Specifications may differ depending on the model and market.
Dishwasher baskets*
Upper basket
1
5
4
1
2
3
1. Wine glass shelf
2. Handle
3. Knife guard
4. Spray arm
5. Locking handle for upper basket
Raising the upper basket
1. Pull out the upper basket.
2. Grab the sides of the upper basket with both hands and lift it up.
Lowering the upper basket
1. Pull out the upper basket.
2. Pull out the two locking handles (5) on either side to lower the upper basket.
Lower basket
1 1 2
1. Fold-down plate support
2. Forward mount for plate support (used for plates with a diameter greater than 25 cm)
3. Handle
3 2
Knife basket
1
1. Basket
2. Knife support
2
*Specifications may differ depending on the model and market.
7
Dishwasher baskets*
Cutlery basket
a b c
Cutlery basket with lid
a b c
8
*Specifications may differ depending on the model and market.
Dishwasher baskets*
Positioning of cutlery basket lid (in upper basket)
The cutlery basket lid can be removed and used, for example, as an extra cutlery basket in the upper basket (see below).
a b c
*Specifications may differ depending on the model and market.
9
10
Front panel
The panel is fitted with touch buttons with audible feedback (see the chapter Settings).
4.
5.
6.
1.
2.
3.
1 2 3 4
Main power switch
Program selector
Program symbol
Display
Rinse aid indicator
Child lock (button lock)
5 6 7 8
7.
8.
9.
10.
11.
9 10 11
Temperature
Drying
Delayed start
Set time (for the Time program)
Start/Stop
NOTE!
• The touch buttons only react to use when the door is open. Wait a moment before pressing the touch buttons after opening the door.
• Two minutes after the last button press, the panel backlight enters energy saving mode. Close and reopen the door, or press the main power switch, to reactivate the panel.
• Keep the touch buttons clean and free from grease. Wipe them clean with a dry or slightly damp cloth. Never use cleaners – they can scratch the surface. Use the main power switch to turn off the dishwasher before cleaning the touch buttons to avoid activating any buttons unintentionally.
Dispenser
1 2 3
4 5
1. Prewash detergent compartment
2. Main wash detergent compartment
3. Rinse aid compartment
4. Detergent compartment lid
5. Rinse aid compartment lid
11
12
Economic dishwashing
Run programs only with a full load
Wait to run a program until the dishwasher is full. This way you save energy. Use the Rinse & Hold program to rinse the dishes if there are any unpleasant odours while you wait for the dishwasher to become fully loaded.
Run programs at a lower temperature
If the dishes are only slightly dirty, you can select a lower temperature with certain programs. See also
the section Select options in the chapter Dishwashing.
Select a program with Short dry
To save energy, use Short dry. The drying result will be better if, once the program is finished, you leave the door slightly open.
Do not rinse under running water
Simply scrape off large food particles before loading the dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or geothermal power to heat your home. Choosing a hot water connection cuts program times and reduces the dishwasher's electricity consumption.
Fragile dishes
Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand strong heat, others can be damaged by dishwashing detergent.
Fragile decoration
Porcelain with decoration on top of the glazing (the items feel rough) should not be washed in a dishwasher.
Crystal/Glass
Position items so that they do not touch each other during the wash. Use the lowest possible wash temperature and the shortest possible program.
Select Short dry. Antique and very fragile items should not be washed in a dishwasher.
Glass washed in a dishwasher at high temperatures can gradually develop a grey film that cannot be removed. Wash fragile glasses at a low temperature and with a small amount of detergent.
Silver
Silver and stainless steel items should not come into contact, as the silver can become discoloured.
Cutlery with glued handles
Some types of glue are not dishwasher safe. In such cases, the handles may loosen.
Wood
Wooden items should only be washed in a dishwasher if marked dishwasher safe.
Aluminium
Aluminium can lose its shine if washed in a dishwasher. However, good quality aluminium pans can be washed in a dishwasher, even if some of the shine will be lost.
Plastic items
Avoid washing plastic items that cannot withstand high temperatures.
13
14
Dishwashing
Below are step-by-step instructions to help you achieve the best possible dishwashing results.
1
Load the baskets correctly
Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off large food particles before loading the dishwasher.
Place glasses, cups, bowls, side plates and saucers in the upper basket. Wine glasses are placed on the wine glass shelf (if fitted). Place sharp knives in the special knife basket at the top of the dishwasher, or in the knife stand on the right (if fitted).
NOTE!
All dirty surfaces should face inwards and downwards!
Place plates, side plates, serving dishes, pots and cutlery (in the cutlery basket) in the lower basket.
Lower the fold-down plate supports when washing pots.
Ensure that spoons do not stack inside each other.
The cutlery basket is placed in the lower basket.
WARNING!
Knives and other pointed items must be placed with the points down in the cutlery basket or horizontally in other baskets.
Do not place cutlery made of different materials, such as silver and stainless steel, in the same place (risk of discolouration).
The cutlery basket has a fold-down section in the middle for small items, or small shafts, such as electric whisk attachments.
See the section Fragile dishes if you want to wash
items that may be considered fragile.
2
Check that the spray arms can rotate freely
3
Add detergent
Detergent is added according to water hardness.
Follow the instructions on the detergent packaging.
Too much detergent can result in less effective dishwashing and also entails greater environmental impact.
Add the detergent to the detergent compartment.
There is one compartment for the prewash and one
for the main wash (see the section Dispenser). If
tablets are not used, add a small amount of the detergent to the prewash compartment. Contact the detergent manufacturer if you have any questions about the detergent.
Place cutlery with the handles facing down, except for knives, and spread them out as much as possible.
WARNING!
Children must be supervised – dishwasher detergent is corrosive!
Dishwashing
NOTE!
Use only dishwasher detergent! Washing up liquid must not be used as the foam that forms prevents the dishwasher from operating effectively.
Dishwasher tablets
Halve the tablet if it is difficult to close the dispenser lid. There is a risk that the detergent will not be released properly if the lid is tight and will not open correctly.
NOTE!
Dishwasher tablets are not recommended for short programs (less than 75 minutes). Use powder or liquid dishwasher detergent instead.
3–in–1/All-in-one detergent
Read through the directions for these products carefully. If anything is unclear, contact the detergent manufacturer.
4
Press the main power switch until the display lights up
5
Select the program
Press the Program selector one or more times until the desired program symbol appears on the display.
Time program
The program adapts to the specified running time or finish time. With this program it is important to choose a time suited to how dirty the dishes are.
0:30-1:15 Slightly dirty dishes
1:30-2:00 Normally dirty dishes
2:15-3:00 Very dirty dishes
To set the program time, see the section Select options.
Heavy wash
Program for very dirty dishes, such as pans, casserole dishes and oven dishes. If these dishes do not completely fill the dishwasher, you can add plates and the like.
Normal wash
Use to wash normally dirty dishes, and even dishes with dried leftovers, such as plates, serving dishes, cups, glasses and so on.
Auto wash
The dishwasher can measure how dirty the dishes are and adjust water consumption and temperature accordingly. When newly installed, the program needs to be run five times before it is fully adapted and can provide the best results.
Daily wash
A program suitable for day-to-day dishwashing. This program can also clean dried leftovers, but is not intended for burnt food, such as on oven dishes.
Quick wash
This program is used for glasses and porcelain that is slightly dirty, such as coffee cups.
Super Quick
Short program lasting about 15 minutes with acceptable results for very slightly dirty dishes.
15
16
Dishwashing
Delicate wash
If the dishes are not very dirty, you can select Delicate wash. This program is intended for glasses and porcelain that have just been used and as such do not require such a powerful program.
This program can be used for fragile dishes. Select
Short dry if you want to be especially cautious. See
also the section Fragile dishes.
Rinse & Dry
This program comprises a rinse with heating and drying. This is a suitable program if, for example, you plan to make jam and want to rinse and heat clean glass jars.
Rinse & Hold
Used to rinse dishes while you wait for the dishwasher to become fully loaded.
Eco wash
Use when you want to save water. For normally dirty dishes.
Dishwashing
Program chart
17
18
Dishwashing
6
Select options
To select an option, press one of the option buttons. The field under the button lights when the option is activated. The available options depend on the selected program. Once you have started the program, the options you selected are saved for the next time you use the same program. An exception is the Delayed start option.
Temperature
The Temperature option button allows you to select a higher or lower temperature for the main wash. If you want to improve dishwashing efficiency, activate the option for a higher temperature. This option remains selected until changed.
You can vary the temperature as shown below:
Heavy wash: 55 °C/ 70 °C
Normal wash: 45 °C/ 65 °C
Daily wash:
Quick wash:
60 °C/ 65 °C
30 °C/ 60 °C
Super Quick: 30 °C/ 60 °C
Delicate wash: 40 °C/ 50 °C
Eco wash: 55 °C/ 60 °C
Drying
Press the Drying option button for improved drying results. The temperature increases during the final rinse, which improves drying results but increases program time and energy consumption. If you want a program with Short dry, press it again and the field under the button turns off. This option can be used with all programs except Auto wash, Time program,
Rinse & Dry and Rinse & Hold.
Delayed start
When you select Delayed start, the dishwasher will start 1–24 hours after you press the Start/Stop button.
1. Press the button once to activate Delayed start.
Press the button several times – or hold it in – to set the desired number of hours.
2. Press Start/Stop and the dishwasher counts down
1 hour at a time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you want to cancel the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start the program.
Set time
Press the option button several times – or hold it in – to set the desired program time for Time program.
You can choose a program time between 30 minutes and 3 hours.
7
Press Start/Stop and close the door
The display flashes three times with the remaining time to indicate that the program has started. Close the door properly otherwise the dishwasher will not start. The display indicates if the door is open.
NOTE!
If the machine does not start within 2 minutes of the last button press, the display returns to showing the last program run.
Stopping or changing a program
If you want to change program after starting the dishwasher, open the door then press and hold
Start/Stop for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then choose a new program, press Start/Stop and close the door.
Dishwashing
Do you want to add more dishes?
Open the door. The dishwasher stops automatically.
Add the dishes, close the door and the dishwasher continues the program.
If the dishwasher is turned off using the main power switch or due to a power failure
If the dishwashing program was not finished, the interrupted program continues when power is restored.
NOTE!
During drying, the program is interrupted if the power is cut or the door is open for more than 2 minutes.
8
After dishwashing
Once the program has finished, "End" appears on the display.
A buzzer also sounds at the end of the program. See
the section Settings, which describes how to change
this function.
Once the dishwasher has finished, it uses only standby power. Turn off the dishwasher using the main power switch if you want to completely cut the power. Turn off the water supply valve after each use.
Drying
For additional drying the door should be opened 35 mm upon completion of the drying cycle. For more
information refer to the page marked Performance information in these instructions.
19
20
Settings
Settings menu overview:
Current menu.
Current selection.
Browse selections.
Confirm selection and open next menu.
Do as follows to open the settings menu:
1.
Turn off the dishwasher using the main power switch. Then press the main power switch again.
2.
Press the Program selector and Drying buttons simultaneously.
+
You can now adjust the following settings:
Description
1: Child lock
(button lock)
0 (Off) or 1 (On) You can activate the child lock (button lock) option to prevent children from starting the dishwasher.
Press the Temperature and Drying buttons simultaneously to temporarily deactivate the button lock when you want to start the dishwasher. The button lock is automatically reactivated after 2 minutes.
2: Buzzer volume 0 (Off), 1–4
3: Operation volume
5: LCD contrast
(Display on the panel)
0 (Off), 1–4
4: LCD contrast
(Display on the front of the door)
-1, 0, +1, +2, +3
-1, 0, +1, +2, +3
6: Rinse aid 0 (Off), 1–6
Finally, press Start/Stop to save and exit the menu.
The dishwasher uses a buzzer to indicate when a program is finished or when a fault has occurred.
This sound is used to confirm each button press.
For adjusting the contrast of the display on the front door.
For adjusting the contrast of the display on the panel.
Rinse aid dosage setting.
Time remaining
Once you have selected a program and options, the display indicates how long the program took the last time it was used.Once you have started the dishwasher, the display indicates how much program time remains. The remaining time is updated after the water for the final rinse has been heated.
This may differ somewhat from time to time depending on the temperature of the water supply, the amount of dishes, the ambient temperature and other factors.
While the program is running, the time counts down and the remaining program time is shown on the display. The remaining time is shown, for example, as 1:15, which means the program will run for another
1 hour and 15 minutes.
NOTE!
During the first run of each program, the remaining time displayed can be slightly misleading, as the dishwasher is estimating the time. When you run the program a second time, the dishwasher will calculate the remaining time based on the previous duration of the program.
21
22
Care and cleaning
The dishwasher tub is made of stainless steel and is kept clean through normal use. However, if you have hard water, limescale deposits may form in the dishwasher. If this happens, run the Normal wash program with high temperature and two tablespoons of citric acid in the detergent compartment (with no dishes in the machine).
Spray arm
1. Turn the handle anticlockwise once.
Pipe section
1x
2. Lift the pipe section straight up by the handle. Free the coarse filter to clean the pipe section.
3. Remove and clean the fine filter.
4. Replace in reverse order. Check that the edges seal properly when replacing the fine filter.
Fine filter Coarse filter
Coarse filter
The coarse filter traps larger food particles, which cannot get past the drainage pump. Empty the coarse filter as necessary.
1. Lift the coarse filter by the handle.
2. Empty the coarse filter. Remember to replace it!
5. Lock the filter in place by turning the handle clockwise to the stop position. The handle should point straight out from the dishwasher.
Fine filter
Debris that collects on the fine filter is automatically rinsed away during each wash. However, the fine filter and its pipe section should be cleaned a couple of times a year.
1x
Care and cleaning
NOTE!
The dishwasher must not be used without the filter in place!
Diswashing efficiency can be affected if the course filter is incorrectly fitted. After cleaning ensure that filter handle is fully locked with the handle pointing out of the dishwasher.
Drainage pump
The pump can be accessed from inside the dishwasher.
1. Cut the power to the dishwasher by pulling out the plug from the wall socket!
2. Remove the coarse filter and pipe section.
3. Remove the small yellow fitted piece at the left of the bottom drain (see illustration below).
If the dishwasher still does not start and a whirring sound is heard, the overflow protection has been activated.
• Shut off the water.
• Remove the plug from the wall socket.
• Call the service division.
NOTE!
Do not forget to reinstall the fitted piece.
Lower spray arm
Holes and bearings can sometimes become blocked.
1. Pull the lower spray arm straight up to release it.
2. Remove any debris using a needle or the like. The spray arms also have holes underneath.
4. By inserting your finger into the hole you can turn the pump blade to release anything blocking it.
5. Reinstall the fitted piece and filters.
6. Plug the machine in again.
23
24
Care and cleaning
Upper spray arm
1. Pull out the basket.
2. Unscrew the spray arm bearings as illustrated to remove the spray arm from the upper basket.
Spray arm bearings
3. Clean the upper spray arm in the same manner as the lower spray arm.
4. Replace the spray arm and screw the spray arm bearings firmly back into place.
Door
When cleaning the edge around the door, use only a slightly damp cloth (with a little cleaner if necessary).
WARNING!
Do not use a spray bottle or the like around the door lock. This is to ensure that water does not penetrate the door catch and come into contact with the electrical components.
Rinse aid
Drying is faster if you use rinse aid. When the rinse aid needs topping up, the above symbol lights on the display.
Top up with rinse aid
Top up with rinse aid as follows:
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid. Only add rinse aid to the level marked max.
Select dosage
The rinse aid dispenser can be adjusted between 0
(off) and 6. At the factory, the rinse aid dispenser is set to 1.
Increase the rinse aid dosage:
• If the dishes have water marks.
Reduce the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the rinse aid can be diluted 50:50 with water.
For water with a hardness greater than 10–12 °dH, you ought to use rinse aid with citric acid (known as acid rinse aid).
Set the dosage
The section Settings describes how to set the rinse
aid dosage.
3. Wipe up any splashes of rinse aid around the compartment.
4. Close the lid firmly.
NOTE!
After topping up, it may take a while before the symbol goes out.
25
26
Error messages
Display Type of fault
Overfilling
Action
Call the service division.
Water outlet fault
Water inlet fault
Inlet valve leakage
See "Possible causes" in the chapter Troubleshooting.
Check that the water tap is on.
Check whether dishwasher inlet hose is connected to a pressure limiting valve (some pressure limiting valves may restrict the supply of water to the dishwasher).
Turn off the water tap and call the service division
Turn off the machine with the main power switch and then turn it on again to clear the error message from the display.
Troubleshooting
Problem
The dishes are not clean.
Spots or films on the dishes.
The dishes have a sticky white/blue film.
Spots on stainless steel or silver.
Spots left after washing.
Rattling sound when dishwashing.
Possible causes
The spray arms do not rotate.
Action
Remove the arms and clean them.
Check that the dishes are not blocking the spray arms.
Old detergent. Detergent is a perishable product.
Avoid large packages.
Incorrect detergent dosage.
Dose according to water hardness. Far too much or far too little detergent results in poorer dishwashing results.
Dishwashing program too weak.
Dishes loaded incorrectly.
Select a higher temperature or a more powerful program.
Do not cover porcelain with large bowls or the like. Avoid placing very tall glasses in the corners of the baskets.
Glasses and cups have toppled over during the program.
The filter is not correctly fitted.
Place dishes to sit steady.
Screw the filter firmly into place. See
the section Care and cleaning.
Incorrect rinse aid dosage setting.
Too high temperature and/or too much detergent can cause etching on crystal. Unfortunately, this cannot be repaired, only prevented.
Wash crystal at a low temperature and with a conservative amount of detergent. Contact the detergent manufacturer.
Rinse aid dosage setting too high.
See the sections Rinse aid and Settings.
Reduce the amount. See the sections
Rinse aid and Settings. If you have
very soft water, you may want to dilute the rinse aid 50:50 with water.
Some foodstuffs, such as mustard, mayonnaise, lemon, vinegar, salt and dressings, can cause spots on stainless steel if left for too long.
Rinse off these types of foodstuffs if not starting the dishwasher immediately. Why not use the Rinse & Hold program.
All stainless steel can cause spots on silver if they come into contact during dishwashing. Aluminium can also cause spots on dishes.
Silver and stainless steel items should not come into contact during dishwashing.
Lipstick and tea can be difficult to wash off.
Use a detergent with a bleaching agent.
The dishes are not correctly placed or the spray arms are not rotating.
Check that the dishes are placed securely. Spin the spray arms to make sure they can rotate.
27
28
Troubleshooting
Problem
The dishwasher does not start.
1 minute appears in the display.
Water remains in the dishwasher.
Bad odour in dishwasher.
The dishes are not dry enough.
Possible causes Action
You have forgotten to turn on the main power switch.
Press and hold the main power switch until the display lights up.
The door is not properly closed.
A fuse/circuit breaker has been tripped.
Check.
Check.
The plug is not plugged into the wall socket.
Check.
The water tap is turned off.
Overflow/leaks
Check.
Check.
A whirring sound (the drainage pump) is heard from the dishwasher and does not stop when the main power switch is turned off.
Turn off the water tap. Pull out the plug and call the service division.
Check that the Delayed start option has not been selected.
Press and hold Start/Stop for three seconds if you want to cancel the Delayed start option.
The program is taking longer than estimated.
None, next time the program is run the corrected time will be displayed.
Blocked drainage hose.
Loosen the drainage hose where it connects to the sink unit's water trap.
Check that no debris has fastened. Is the cone-shaped part of the pipe cut to an inner diameter of at least 14 mm?
Kink in drainage hose.
The filters are blocked.
The filter is not locked in completely.
Debris in the drainage pump.
Check that the hose is free from kinks and sharp bends.
Clean the coarse and fine filters.
Ensure filter is completely locked with handle pointing towards the door.
Clean the drainage pump. See the
section Care and cleaning.
Dirt around the seals and in corners.
Clean with washing-up brush and low foaming cleaner.
Low temperature programs have been selected for a prolonged period.
Run a program with a higher temperature about once a month.
Drying power too low.
The dishwasher is not fully loaded.
Activate the Drying option.
Fully load the dishwasher.
Rinse aid needs topping up or dosage is set too low.
Top up with rinse aid or increase the rinse aid dosage. See the sections
Rinse aid and Settings.
Open the door a little once the program has finished.
Troubleshooting
Problem
Cannot close door.
Possible causes
The baskets are not correctly positioned.
Action
Check that the baskets are correctly positioned horizontally.
Check that the dishes are not blocking the baskets from sliding properly into place.
Wait a moment then try again.
The touch buttons do not react when pressed.
You have pressed the touch buttons too soon after opening the door.
Dirt on the touch buttons.
If this symbol appears on the display the door is not open enough.
Child lock (button lock) activated.
Clean with a dry or slightly damp cloth.
Open the door until the display lights up.
See the section Settings.
29
Performance information
Energy labelling
Australian standard:
Number of place settings:
Dishwashing programs:
AS/NZS 2007
14
Normal wash 45 °C, no options
The door should be opened upon completion of the drying cycle a distance of 35 mm at V.
V
Program time: 1:45 hours:minutes
Connection: Cold water 20 °C
Test method for noise measurement: IEC-704-3
Dosages during testing
Detergent:
Prewash:
In accordance with AS/NZS 2007
7,5 gram
Main wash:
Rinse aid:
25 gram
In accordance with AS/NZS 2007
Rinse aid dosage: 3
Loading the dishwasher
30
Make sure the upper basket is in the lowest position. See the section Dishwasher baskets.
Performance information
2
5
5
2
5
5
2
2 2 2
5
2
5
5 1 1 1 1
2
2
1
2 2
1 1
4
2
2
4
4
4 4
4
4
2
1. Teaspoons
2. Dessertspoons
3. Soupspoons
4. Forks
5. Knives
3
5 5
5 5
3
5
1 1 1 1 1 1 1
5
5
3 3
3 3 3 3 3 3 3
4
4
3
4
4
4
3
4
4
3
Technical data
Height:
Width:
Depth:
Weight:
Capacity:
Water pressure:
Electrical connection:
Rated power:
1) Weight can vary due to different specifications.
2) In accordance with standard, AS/NZS 2007.
817-875 mm
596 mm
550 mm
42 kg
1)
14 place settings
2)
300 - 1000 kPa
0.3–10 kp/cm
2
3–100 N/cm
2
See type plate.
See type plate.
31
Installation
596
550
519
1189
[mm]
32
49 30
30-94
Safety instructions
• Connections to electricity, water and drainage must be performed by a qualified professional.
• Electrical, water and drainage installations must be carried out by a qualified professional.
• Always follow applicable regulations for water, drainage and electricity.
• An incorrect or flawed installation can result in higher consumption of energy, water and detergent, which can result in increased costs and poor dishwashing results. In order to minimise noise it is important that you follow the instructions.
• Exercise caution during installation! Use protective gloves! Always have someone assist you!
• Place a watertight protective tray on the floor under the dishwasher to prevent damage from any water leaks.
• Before screwing the dishwasher into place, test the dishwasher by running the Rinse & Hold program. Check that the dishwasher fills with water and drains. Check also that none of the connections leak.
WARNING!
Turn off the water supply when installing the dishwasher!
WARNING!
The plug must be disconnected or power to the socket turned off while the work is carried out!
Installation
Suggested machine installations
The dishwasher can be installed built-in, completely freestanding or partially built-in.
A. Built-in
The dishwasher is intended for installation under a worktop. The recess dimensions are illustrated. Holes for wires/cables need not be larger than 38 mm in diameter. Make sure the edges of such holes are even to prevent damage to the drainage and inlet hoses and the power cable.
[mm]
600
49
>550
820*-878
136
413
455-475
600
WARNING!
A completely freestanding dishwasher must be fitted with anti-tip brackets.
C. Partially built-in
If the dishwasher is installed so that either side is visible, you can fit a side panel. These accessories can be purchased where you bought the dishwasher.
*Remove washers and glide foot for an installed height of 820-824 mm.
B. Freestanding
A freestanding dishwasher must be fitted with anti-tip brackets. This comprises two brackets, which are screwed into place as illustrated.
Next, slide the dishwasher into place so that the brackets grip the rear feet. Now the dishwasher will not tip over if a load is placed on the door when open.
If the dishwasher is installed completely freestanding, side panels and a worktop should be fitted. These accessories can be purchased where you bought the dishwasher.
33
Installation
Adjust the height and slide the dishwasher into place
1. Attach the coasters (if applicable) to the dishwasher.
2. Start by measuring the height from the floor to the bottom edge of the worktop.
3. Measure the height from the floor to the top edge of the dishwasher.
4. Adjust all feet by turning them clockwise to raise or anticlockwise to lower the dishwasher.
5. Check that there is an air gap of at least 3 mm between the underside of the worktop and the top edge of the dishwasher.
6. Tighten the lock nuts (lock nut) on the rear feet.
7. Slide the dishwasher into place.
• Pull through the drainage and supply hoses when the machine is slid into place.
• Check that the hoses have no kinks or sharp bends, and check that there is nothing that can damage the hoses.
34
8. Make any final adjustments to the front feet (the dishwasher may lean no more than 5 mm) and tighten the lock nuts.
If you want to install your dishwasher freestanding, skip steps 2, 3 and 5 above.
Installation
Drainage connection
When the drainage hose is routed to a connection nipple on the sink unit's water trap (see illustration 1), please note that the hose must be attached at the same height as the underside of the sink unit, otherwise dishwater from the sink may flow back into the dishwasher. The drainage hose is threaded onto the cone-shaped connection pipe on the sink unit's water trap. The cone-shaped pipe must be cut to an internal diameter of at least 14 mm. For other connection alternatives, see illustrations 2 and 3.
The drainage hose may be extended by a maximum of 3 m (the total length of the drainage hose must not exceed 4,5 m). Any joins and connecting pipes must have an internal diameter of at least 14 mm. However, the drainage hose should ideally be replaced with a new hose without joins.
No part of the drainage hose may be more than 950 mm above the bottom of the dishwasher. The hose must not be routed directly to the floor drain or similar.
In such cases, the hose can act as a siphon and empty the dishwasher.
The hose must always discharge at least 350 mm above the bottom of the machine.
Ensure that the drainage hose has no kinks.
NOTE!
The hose must be attached at the same height as the underside of the sink.
Max. 950 mm
Min. 350 mm
Figure 1
Max. 3 m
Figure 2
Figure 3
Max. 950 mm
Min. 350 mm
Min. 14 mm
Max. 950 mm
Min. 350 mm
35
36
Installation
Connection to water supply
Use only the supply hose provided with the dishwasher. Do not re-use old hoses or other spare supply hoses.
The supply pipe must be fitted with a stopcock. The stopcock must be easily accessible, so that the water can be shut off if the dishwasher has to be moved.
Once the installation is complete, the stopcock should be opened to allow the pressure to settle for a while and to check that all connections are tight.
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use, for example, district heating, solar power or geothermal power to heat your home.
NOTE!
Connecting a dishwasher to the water supply via certain types of pressure limiting valves may restrict the water supply!
This may cause F:12 error code/ Water inlet fault to be displayed.
Electrical connection
Information about the electrical connection can be found on the serial number plate This specification must match the electricity supply.
Dishwashers fitted with a plug must be connected to an earthed socket.
The electric wall socket must be placed outside of the installation area to be easily accessible after installing the dishwasher. Do not use an extension cord!
NOTE!
Repairs and maintenance must be carried out by a qualified professional.
Adjusting the plinth (only when using toe kick accessory)
The dishwasher is supplied with one or two toe kicks depending on the model. The table shows which toe kick you should use depending on the recess height and plinth depth. Attach the enclosed soundproofing material to the toe kick (certain models).
Recess height
(mm)
30
820
830
840
850
N/A
L
N/A
40
N/A
L
N/A
Plinth depth (mm)
50
N/A
L
N/A
60
N/A
L
N/A
70
L
L
N/A
80
N/A N/A N/A N/A N/A L
L
L
H
90 100
L
L
L
H
L
L
L
H
860
870
N/A
H
N/A N/A
H H
N/A
H
H
H
H
H
H
H
H
H
L
H
Low toe kick (height=90 mm), article number 80
735 66
High toe kick (height=120 mm), article number 80
735 67
N/A Not recommended for aesthetic reasons.
Recess height
Plinth depth
Installation
Set the correct plinth depth as follows
1. Attach the supplied soundproofing material to the back of the toe kick (certain models only). If you use the low toe kick, adjust the height of the soundproofing by removing the thinner part of the strip.
Adjust soundproofing material height
2. Squeeze together the grey catches and pull out the holders to the desired depth. Push in the catches to lock the holders into place.
3. Hang the toe kick on the holders by inserting it into the notches.
Screwing the dishwasher into place
(Applicable only to built-in dishwashers.)
After fastening the machine, check that the front feet still touch the floor.
37
38
Service
Read the chapter Troubleshooting before contacting
the service division. Make a note of the information on the serial number plate on the right inside the dishwasher. Note the type number (1) and the serial number (2).
1
TYPE
SERIAL NO
2
Your notes
39
Quick guide
1
Load the baskets
Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off large food particles before loading the dishwasher.
2
Add detergent
The detergent compartment has one smaller compartment for the prewash and one for the main wash.
3
Check that the spray arms can rotate freely
4
Press the main power switch until the display lights up
5
Select a program and any options
6
Press Start/Stop and close the door
40
Art. No.: 8090985. Rev. 01. We reserve the right to make changes.
