DS2000A

Wider vertical range(500uV/div ~ 10V/div), lower noise fl oor,

Better for small signal capturing

Bandwidth 70MHz,100MHz,200MHz,300MHz,standard 50Ω input

Max. Sample Rate 2G Sa/s

Standard Memory Depth up to14Mpts,Optional Memory Depth

up to 56Mpts

Innovative "UltraVision" technology

Waveform capture rate up to 50,000 wfs/s

Up to 256 Levels intensity grading waveform display

Up to 65,000 frames Hardware based Real Time waveform,

Record, Replay & Analysis functions(Std.)

A variety of trigger and serial bus decording

functions(RS232,I2C,SPI,CAN)

Built-in 2 Ch Waveform generator (DS2000A-S)

Complete connectivities: USB Host& Device, LAN(LXI), AUX

Compact size, light weight, easy to use

8 inch TFT (800x480) WVGA

DS2000A Series is the new mainstream digital scope to meet the customer's applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities.

DS2000A Series Digital Oscilloscope

RUN/STOP/SINGLE

Independent control for each channel

Decoding

Waveform record&replay

Product Dimensions: Width X Height X Depth=361.6 mm×179.6 mm×130.8 mm Weight: 3.9 kg ± 0.2 kg(Without Package)

Innovative UltraVision technology

Deeper Memory Depth (Std.14Mpts,Opt.56Mpts)

Higher Waveform Capture Rate (Up to 50,000 wfms/s)

Realtime Waveform Record,Replay & Analysis (Up to 65,000 frames)

Multi-level Intensity Grading Display (Up to 256 Levels)

Models and Key Specifications

Model Number

Analog BW

Channels

Max. Sample rate

Max. Memory Depth

Max. Waveform

Capture rate

Real Time waveform

Record,

Replay and Analysis function

Std. Probes

Built-in 2Ch 25MHz

Source

DS2072A DS2072A-S DS2102A DS2102A-S DS2202A DS2202A-S

70 MHz 100MHz 200 MHz

2

2GSa/s (Single-channel)、 1GSa/s(Dual-channel）

14Mpts（std.）、56Mpts（option）

50,000 wfms/s

No Yes No

Up to 65，000 Frames

RP3300A 350MHz BW Passive Probe:2 sets

Yes No Yes

1

RIGOL

DS2302A DS2302A-S

300 MHz

No Yes

Wider Vertical range(500uV/div~10V/div

)

,Lower noise floor, Better for small signal capturing

Full bandwidth,Lower Overshoot, Perfect frequency response design

UltraVision: Deeper memory(Std.14Mpts,Opt.56Mpts) UltraVision: Up to 50,000 wfms/s Waveform capture rate

UltraVision:Realtime waveform record,replay,analysis function (std.)

UltraVision: Deeper Memory with Multi-Level intensity grading display(Up to 256 levels)

Std. serial bus trigger functions(RS232,I2C,SPI) Optional Serial bus decoding function with listing display

RIGOL

2

Versatile Trigger Functions

(

Runt, Nth Edge,Setup/Hold …

)

Runt Trigger

Std. Advanced Math Function

Std. Mask Test Function

Built-in 2CH Source(DS2000A-S) Arb function of the Built-in 2CH Source (DS2000A-S)

Automatic measurements with statistics Complete Connectivity(USB Host,USB Device,LAN,AUX)

3

RIGOL

RIGOL Probes supported by DS2000A Series:

RIGOL Passive Probes RIGOL Active & Current Probes

Model Number Tpye Description

Model Number Tpye Description

RP2200

RP3300A

RP3500A

RP1300H

RP1050H

High Z

Probe

1X: DC~7MHz

10X:DC~150MHz

Compatibility：

All RIGOL Scopes.

High Z

Probe

1X: DC~8MHz

10X:DC~350MHz

Compatibility：

All RIGOL Scopes.

High Z

Probe

DC~500MHz

Compatibility：

All RIGOL Scopes.

High

Voltage

Probe

DC~300MHz

CATI 2000V(DC+AC),

CATII 1500 V(DC+AC)

Compatibility：

All RIGOL Scopes.

High

Voltage

Probe

DC~50MHz

DC:0~15KV

DC,AC:pulse <=30KVp-p,

AC:sine wave <=10KVrms

Compatibility：

All RIGOL Scopes.

Current

Probe

BW:DC~300kHz,

Max.DC:±100A,

AC P-P:200A,AC RMS:70A

Compatibility：All RIGOL Scopes.

RP1001C

RP1002C

RP1003C

RP1004C

Current

Probe

BW:DC~1MHz,

Max.DC:±70A,

AC P-P:140A,AC RMS:50A

Compatibility：

All RIGOL Scopes.

Current

Probe

BW:DC~50MHz,

Max.AC RMS:30A

AC Peak:50A(Noncontinuous)

Compatibility：

All RIGOL Scopes.

Must order RP1000P Power supply.

Current

Probe

Current

Probe

BW:DC~100MHz,

Max. AC RMS:30A,

AC Peak:50A(Noncontinuous)

Compatibility：

All RIGOL Scopes.

Must order RP1000P Power supply.

BW:DC~10MHz,

Max.150 A rms,

300 A peak (Noncontinuous),

500 A peak (@pulse width <=30 ms)

Compatibility：

All RIGOL Scopes.

Must order RP1000P Power supply.

RP1005C

Power

Supply

Power supply for

RP1003C,RP1004C,RP1005C, support 4 channels.

RP1000P

High

Voltage

Differential

Probe

BW:25MHz;

Max. Voltage ≤ 1400Vpp

Compatibility：

All RIGOL Scopes.

RP1025D

High

Voltage

Differential

Probe

BW:50MHz;

Max. Voltage ≤ 7000Vpp

Compatibility：

All RIGOL Scopes.

RP1050D

RP1100D

High

Voltage

Differential

Probe

BW:100MHz;

Max. Voltage ≤ 7000Vpp

Compatibility:

All RIGOL scopes

RIGOL

4

Specifications

All the specifications are guaranteed except parameters marked with “Typical” and the oscilloscope needs to operate for more than 30 minutes under the specified operation temperature.

Sample

Sample Mode

Real Time Sample Rate

Peak Detect

Averaging

High Resolution

Memory Depth

Real-time Sample

2 GSa/s (single-channel)

1 GSa/s (dual-channel)

500 ps (single-channel)

1 ns (dual-channel)

After both the channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512,

1024, 2048, 4096 or 8192.

12 bits of resolution when ≥5 μs/div @ 1 GSa/s (or ≥10 μs/div @ 500 MSa/s).

single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M pts and 56M pts (option) are available dual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 28M pts (option) are available

Input

Number of Channels

Input Coupling

Input Impedance

Two channels

DC, AC or GND

(1MΩ±1%)||(16 pF±3 pF) or 50 Ω±1.5%

Probe Attenuation Coefficient 0.01X to 1000X, in 1-2-5 step

Maximum Input Voltage (1MΩ) Maximum Input Voltage of the Analog Channel

CAT I 300 Vrms, CAT II 100 Vrms,

Transient Overvoltage 1000 Vpk with RP2200 10:1 probe: CAT II 300 Vrms with RP3300A 10:1 probe: CAT II 300 Vrms with RP3500A 10:1 probe: CAT II 300 Vrms

Horizontal

Timebase Scale

Timebase Accuracy

1

Clock Drift

Max Delay Range

Timebase Mode

Number of XYs

Waveform Capture Rate

2

DS2302A: 1 ns/div to 1000 s/div

DS2202A: 2.000 ns/div to 1000 s/div

DS2102A/DS2072A : 5.000 ns/div to 1000 s/div

≤ ± 25 ppm

≤ ± 5 ppm/year

Pre-trigger (negative delay): ≥1 screen width

Post-trigger (positive delay): 1 s to 100,000 s

Y-T, X-Y, Roll, Delayed Sweep

1

50,000 wfms/s (dots display)

Vertical

Bandwidth (-3dB)

Single-shot Bandwidth

Vertical Resolution

Vertical Scale

Offset Range

Bandwidth Limit

1

Low Frequency Response

(AC Coupling, -3dB)

Calculated Rise Time

1

DC Gain Accuracy

DS2302A: DC to 300 MHz

DS2202A: DC to 200 MHz

DS2102A: DC to 100 MHz

DS2072A: DC to 70 MHz

DS2302A: DC to 300 MHz

DS2202A: DC to 200 MHz

DS2102A: DC to 100 MHz

DS2072A: DC to 70 MHz

8bit

500 μV/div to 1 V/div (50Ω)

500 μV/div to 10 V/div (1MΩ)

500 μV /div to 50 mV/div: ± 2 V

51 mV/div to 200 mV/div: ± 10 V

205 mV/div to 2 V/div: ± 50 V

2.05 V/div to 10 V/div: ± 100 V

DS2302A/DS2202A : 20 MHz/100 MHz

DS2102A/DS2072A : 20 MHz

≤5 Hz (on BNC)

DS2302A: 1.2ns

DS2202A: 1.8 ns

DS2102A: 3.5 ns

DS2072A: 5 ns

±2% full scale

5

RIGOL

DC Offset Accuracy

Channel to Channel Isolation

Trigger

Trigger Level Range

Trigger Mode

Holdoff Range

High Frequency Rejection

Low Frequency Rejection

Trigger Sensitivity

1

1

Edge Trigger

Edge Type

Pulse Trigger

Pulse Condition

Pulse Width Range

Runt Trigger

Pulse Width Condition

Pulse Polarity

Pulse Width Range

Windows Trigger (Option)

Windows Type

Trigger Position

Windows Time

Nth Edge Trigger (Option)

Edge Type

Idle Time

Edge Number

Slope Trigger

Slope Condition

Time Setting

Video Trigger (HDTV Option)

Signal Standard

Pattern Trigger

Pattern Setting

Delay Trigger (Option)

Edge Type

Delay Type

Delay Time

TimeOut Trigger (Option)

Edge Type

Timeout time

Duration Trigger (Option)

Pattern

Trigger Condition

Duration Time

Setup/Hold Trigger

Edge Type

Data Type

Setup Time

Hold Time

RS232/UART Trigger

Polarity

Trigger Condition

Baud Rate

Data Bits

I2C Trigger

Trigger Condition

Address Bits

Address Range

Byte Length

±0.1 div ± 2 mV ± 1% offset value

DC to maximum bandwidth: >40 dB

Internal

EXT

Auto, Normal, Single

100 ns to 10 s

± 5 div from center of the screen

± 4 V

75 kHz

75 kHz

1 div (below 10 mV or noise rejection is enabled)

0.3 div (above 10 mV and noise rejection is disabled)

Rising, Falling, Rising&Falling

Positive Pulse Width (greater than, lower than, within specific interval)

Negative Pulse Width (greater than, lower than, within specific interval)

2 ns to 4 s

None, >, <, <>

Positive, Negative

2 ns to 4 s

Rising, Falling, Rising&Falling

Enter, Exit, Time

16 ns to 4 s

Rising, Falling

16 ns to 10 s

1 to 65535

Positive Slope (greater than, lower than, within specific interval)

Negative Slope (greater than, lower than, within specific interval)

2 ns to 4 s

Support standard NTSC, PAL and SECAM broadcasting standards; support 480P, 576P, 720P, 1080P and

1080I HDTV standards

H, L, X, Rising, Falling

Rising, Falling

>, <, <>, ><

2 ns to 4 s

Rising, Falling, Rising&Falling

16 ns to 4 s

H, L, X

>, <, <>

2 ns to 4 s

Rising, Falling

H, L

2 ns to 1 s

2 ns to 1 s

Normal, Invert

Start, Error, Check Error, Data

2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, User

5 bit, 6 bit, 7 bit, 8 bit

Start, Restart, Stop, Missing ACK, Address, Data, A&D

7 bit, 8 bit, 10 bit

0 to 127, 0 to 255, 0 to 1023

1 to 5

RIGOL

6

SPI Trigger

Trigger Condition

Timeout Value

Data Bits

Data Line Setting

CAN Trigger

Signal Type

Trigger Condition

Baud

Sample Point

Frame Type

Error Type

USB Trigger (Option)

Signal Speed

Trigger condition

Measure

Cursor

Timeout

100 ns to 1 s

4 bit to 32 bit

H, L, X

Rx, Tx, CAN_H, CAN_L, Differential

SOF, EOF, Frame Type, Frame Error

10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps, 1 Mbps, User

5% to 95%

Data, Remote, Error, OverLoad

Bit Fill, Answer Error, Check Error, Format Error, Random Error

Low Speed, Full Speed

SOP, EOP, RC, Suspend, Exit Suspend

Auto Measurement

Number of Measurements

Measurement Range

Measurement Statistic

Frequency Counter

Display

Display Type

Display Resolution

Display Color

Persistence Time

Display Type

Real-time Clock

Manual Mode

Track Mode

Auto Mode

Voltage Deviation between Cursors (△V)

Time Deviation between Cursors (△T)

Reciprocal of △T (Hz) (1/△T)

Voltage and Time Values of the Waveform Point

Allow to display cursors during auto measurement

Measurements of Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude, Average,

Mean Square Root, Overshoot, Pre-shoot, Area, Period Area, Frequency, Period, Rise Time, Fall Time,

Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay AB , Delay

AB , Phase AB , Phase AB

Display 5 measurements at the same time.

Screen or cursor.

Average, Max, Min, Standard Deviation, Number of Measurements

Hardware 6 bits frequency counter

(channels are selectable)

Math Operation

Waveform Operation

FFT Window Function

FFT Display

FFT Vertical Scale

Logic Operation

Math Function

A+B, A-B, A×B, A/B, FFT, Editable Advanced Operation, Logic Operation

Rectangle, Hanning, Blackman, Hamming

Split, Full Screen

Vrms, dB

AND, OR, NOT, XOR

Intg, Diff, Log, Exp, Sqrt, Sine, Cosine, Tangent

Number of Buses for Decoding 2

Decoding Type Parallel (standard), RS232/UART (option), I2C (option) , SPI (option)

8.0 inches (203 mm) TFT LCD display

800 Horizontal ×RGB×480 Vertical Pixel

160,000 Color (TFT)

Min, 50ms, 100ms, 200ms, 500ms, 1 s, 2 s, 5 s, 10 s, 20 s, Infinite

Dots, Vectors

Time and Date (user adjustable)

Signal Source (DS2000A-S)

Sample Rate

Vertical Resolution

Max. Frequency

Standard Waveform

Arbitrary Waveform

Sine

2

200 MSa/s

14 bits

25 MHz

Sine, Square, Pulse, Ramp, Noise, DC

Sinc, ExpRise, ExpFall, ECG, Gauss, Lorentz, Haversine

Frequency Range

Flatness

0.1 Hz to 25 MHz

±0.5 dB (relative to 1 kHz)

Harmonic Distortion -40 dBc

Spurious (non-harmonic)

THD

SNR

-40 dBc

1%

40 dB

7

RIGOL

Square/Pulse

Ramp

Noise

Built-in Waveform

Arbitrary Waveform

Frequency

Amplitude

DC Offset

Frequency Range

Rise Time/Fall Time

Overshoot

Duty Cycle

Duty Cycle Resolution

Minimum Pulse Width

Pulse Width Resolution

Jitter

0.1 Hz to 15 MHz

<15 ns

<5%

10% to 90%

1% or 10 ns (the larger one)

20ns

10 ns or 5 bits (the larger one)

500 ps

Frequency Range

Linearity

Symmetry

Bandwidth

0.1 Hz to 100 kHz

1%

0 to 100%

25 MHz (typical)

Frequency Range

Frequency Range

Length 2 to 16 kpts

Internal Storage Locations 10

Accuracy

0.1 Hz to 1 MHz

0.1 Hz to 10 MHz

Resolution

Output Range

Resolution

Accuracy

Range

Resolution

Accuracy

100 ppm (<10 kHz)

50 ppm (>10 kHz)

0.1 Hz or 4 bits (the larger one)

20 mVpp to 5 Vpp, HighZ

10 mVpp to 2.5 Vpp, 50 Ω

100 μV or 3 bits (the larger one)

2% (1 kHz)

±2.5 V, HighZ

±1.25 V, 50 Ω

100 μV or 3 bits (the larger one)

±2% of Offset setting

Interface

Standard Ports

Printer Compatibility

USB HOST (support USB-GPIB), USB DEVICE, LAN, Aux Output (TrigOut/PassFail)

PictBridge

General Specifications

Probe Compensation Output

Output Voltage

1

Frequency

1

Power

Power Voltage

Power

Fuse

Environment

Temperature Range

About 3 V, peak-peak

1 kHz

100 to 240 V, 45 to 440 Hz

Maximum 50 W

2 A, T Degree, 250 V

Cooling Method

Humidity Range

Altitude

Operating: 0℃ to +50℃

Non-operating: -20℃ to +70℃ fan cooling

0℃ to +30℃ : ≤95％ Relative Humidity

+30℃ to +40℃ : ≤75％ Relative Humidity

+40℃ to +50℃ : ≤45％ Relative Humidity

Operating: under 3,000 meters

Non-operating: under 15,000 meters

Mechanical Specifications

Size

3

Weigt

4

Width×Height×Depth = 361.6 mm× 179.6 mm×130.8 mm

Package Excluded

Package Included

3.9 kg ± 0.2 kg

4.5 kg ± 0.5 kg

Calibration Interval

The recommended calibration interval is one year.

Regulatory Information

Electromagnetic Compatibility 2004/108/EC

Safety

Execution standard EN 61326-1:2006 EN 61326-2-1:2006

UL 61010-1:2004; CAN/CSA-C22.2 NO. 61010-1-2004;

EN 61010-1:2001; IEC 61010-1:2001

Note: 1 Typical.

2 Maximum value with 20 ns, single-channel, dots display and auto memory depth.

3 Supporting legs and handle folded, knob height included.

4 Standard configuration.

RIGOL

8

Ordering Information

Model

Standard Accessories

Optional Accessories

Deep Memory Option

Advanced trigger functions

Decoding Options

Description

70MHz,2-channel

70MHz,2-channel + 2-channel Signal Source

100MHz,2-channel

100MHz,2-channel + 2-channel Signal Source

200MHz,2-channel

200MHz,2-channel + 2-channel Signal Source

300MHz,2-channel

300MHz,2-channel + 2-channel Signal Source

Power Cord conforming to the standard of the country

USB Data Cable

2 Passive Probes (350 MHz)

Quick Guide

Resource CD (User’s Guide and Application Software)

Rack Mount Kit

56Mpts(single channel)/28Mpts(dual channel)

Windows, Nth Edge,HDTV,Delay, Time Out,

Duration, USB

RS232,I2C,SPI Decoding Kit

CAN Analysis kit(Trigger+Decoding)

Warranty

Three-year warranty,excluding probes and accessories.

Order Number

DS2072A

DS2072A-S

DS2102A

DS2102A-S

DS2202A

DS2202A-S

DS2302A

DS2302A-S

-

CB-USBA-USBB-FF-150

RP3300A

-

-

RM-DS2000A

MEM-DS2000A

AT-DS2000A

SD-DS2000A

CAN-DS2000A

Headquarter

RIGOL TECHNOLOGIES, INC.

No.156,Cai He Village,

Sha He Town,

Chang Ping District, Beijing,

102206 P.R.China

Tel:+86-10-80706688

Fax:+86-10-80705070

Email: [email protected]

USA

RIGOL TECHNOLOGIES

USA,INC.

7401 First Place,Suite N

Oakwood Village

OH 44146,USA

Tel/Fax: 440-232-4488

Toll free: 877-4-RIGOL-1

Email: [email protected]

Europe

RIGOL TECHNOLOGIES EU,

GmbH

Lindbergh str. 4

82178 Puchheim, Germany

Tel: +49(0)89-8941895-0

Email: info-europe@

rigoltech.com

RIGOL

®

is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For the latest information about RIGOL's products, applications and services, please contact local RIGOL offi ce or access RIGOL offi cial website:

www.rigol.com

October,2013