advertisement
DISHWASHER
ZDS 689 EX
152991 99/0
INSTRUCTION BOOKLET
GB
Contents
For the user
Important safety information
Description of the appliance
The control panel
Before use
Setting the water softener
Rinse aid
Use of detergent
Using your appliance
Loading your appliance
Adjusting the height of the upper basket
Hints and tips
Washing programmes
Operating sequence
Maintenance and cleaning
Internal cleaning
Cleaning the central filter
Cleaning the large filter
External cleaning
Prolonged periods of non-operation
Frost precautions
Moving the machine
Something not working
Service and spare parts
Guarantee Conditions
21
21
21
21
20
20
20
20
22
24
25
16
17
18
5
9
10
7
7
12
12
15
3
4
For the installer
Installation instruction
Technical specifications
Water supply connections
Water outlet connection
Electrical connection
Building-in
Levelling
The furniture door
Adjusting the door balance
Fixing to the adjacent units
Kitchen plinth adjustment
Guide to use the instruction book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
1. 2. 3.
Step by step instructions
Hints and tips
30
30
31
32
32
33
26
26
27
28
29
2 PCO12UK
Important safety information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.
Installation
■
This appliance is heavy. Care should be taken when moving it.
■
It is dangerous to alter the specifications or attempt to modify this product in any way.
■
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
■
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
■
Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Child Safety
■ This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the controls or play with the product.
■ Keep all packaging well away from children.
■ Keep all detergents in a safe place out of children's reach.
During Use
■
Items that are contaminated by petrol, paint,steel or iron debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.
■
Under no circumstances should you open the door whilst the appliance is in operation. Always turn off the appliance before opening the door.
■
Only use detergent specifically designed for use in dishwashers.
■
Long blades knives stored in an upright position are a potential hazard.
■
Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.
■ When finishing loading or unloading close the door, as an open door can be a hazard.
■ Do not sit or stand on the open door.
■ Isolate the appliance from the power supply and turn off the water supply after use.
■ Care should be taken when cleaning the bottom door seal and hinge area as any exposed metal edges may cut if care is not taken.
■ This product should be serviced by an authorised
Service engineer, and only genuine spare parts should be used.
■
Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force
Centre. Always insist on genuine spare parts.
Conservation
In the interest of the environment:
■
Materials marked with the symbol are recyclable.
■
Check with your local Council or Environmental
Health Office to see if there are facilities in your area for re-cycling this appliance.
■
When the appliance is to be scrapped, cut off the power supply cable and make the door closing device unusable to prevent young children from being trapped inside.
■ Help to keep your country tidy - use authorised disposal sites for your old appliance.
3 PSI01UK
Description of the appliance
1
2
3
4
5
6
1 Levelling spacers
2. Upper basket stop
3. Upper spray arm
4. Salt container
5. Large filter
6. Detergent dispenser
7. Control panel
8. Rating plate
IN72
9. Rinse aid dispenser
10. Central filter
11. Lower spray arm
12. Upper basket
13. SID (Super Intensity Dispenser)
9
8
7
13
12
11
10
4 PDA12UK
The control panel
1 2 3
1. On/Off indicator light
This light comes on when the On/Off pushbutton is depressed, indicating that the machine is on.
2. On/Off pushbutton
Press this button to preset the dishwasher to accept settings (selection of a wash programme, economy drying, etc.).
The number "3" appears in the digital display.
When the washing programme has finished, the machine stops automatically and the On/Off indicator light remains on. To switch the indicator light off press the On/Off pushbutton.
3. Indicator lights
Open door
Flashes when the has not been properly closed.
Salt
Flashes when the salt has run out, to remind you to refill the salt container.
Water tap
Flashes when:
- The water tap is closed.
- The mains water supply has been cut off.
- The inlet hose may be blocked.
Rinse aid
Flashes when the rinse aid has run out, to remind you to refill the rinse aid dispenser.
4 5 6 7 8 9 10
4. Programme selection pushbutton
To select a programme press this button until you see the number of the programme you wish to select in the digital display (see chart "washing programmes").
All the indicator lights of the phases corresponding to the selected programme will come on.
5. Half load pushbutton
By pressing this button, washing can be confined to one basket instead of both.
The indicator light corresponding to the basket selected comes on (upper or lower).
This is very useful and economical when only a few dishes need washing.
Remember to load all the dishes into the basket selected.
If both indicator lights are out, washing will be carried out in both baskets.
5 PCP17UK
6. Eco drying
By pressing this button you can opt to shorten or completely eliminate the hot air drying cycle, so making a considerable energy saving (Eco or No).
If programme no. 7 is selected the indicator light
"NO" will come on for default but it is possible to change the setting by depressing this button.
With the programme no. 1 the drying options are not available.
If both pilot lights are out, the full drying cycle will be carried out.
7. Digital display
8. Delay start button
Allows the start of the programme to be delayed by a minimum of 1 hour, up to 9 hours.
How to set the "Delay start":
When the button is pressed, the number 1 followed by the letter H appears in the display. This means that you have delayed the start of the programme by 1 hour.
Press the button again to select the number of hours by which you wish to delay the programme start, up to a maximum of 9.
The delay start will not modify the settings made previously.
Close the dishwasher door and press the start button
(if the start button is pressed with the door open the door indicator light will flash). All the phase indicator lights are off.
The countdown will begin and the display will indicate with step of 1 hour how much longer there is to go before the beginning of the programme. The letter H on the display will flash indicating the delay is operating.
If you wish to cancel the delay start, press the start button until you see two zeros in the digital display.
9. Start pushbutton
This is the last button to be pressed after setting the wash programme and, if required, drying options, half load, delayed start.
This button starts the programme. On the digital display you can read the approximate duration in minutes of the programme and, as it proceeds, how much longer there is to go before the end of the programme in steps of 5 minutes.
At 10 minutes from the end of the programme the steps will be in steps of 1 minute.
At the end of the programme in the digital display will appear due zeros.
To cancel or change a programme
You are able to cancel or change a programme with the door open or closed.
If you wish to cancel/change a programme which is already running or a setting which has just been made, press the start button until due zeros appear in the digital display and the indicator lights (except the
On/OFF indicator light) turn off.
Now a new programme and new options may be selected.
10. Programme phase indicator lights
As soon as you select a washing programme, this illuminates all the phases the programme consists of.
As the programme progresses, the wash cycle phase in progress will illuminate.
At the end of the programme the phase indicator lights turn off.
Prewash/Rinse and Hold
Wash
Rinse
Hot air drying
6 PCP18UK
Before use
Before using your dishwasher for the first time:
1. ensure that the electrical and water connections comply with the installation instructions
2. remove all packaging from inside the appliance
3. set the water softener
4. fill the salt container
5. fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales,
German, French degrees and PPM (parts per Million).
The softener should be adjusted according to the hardness of the water in your area. Your local Water
Authority can advise you on the hardness of the water in your area.
The dishwasher is factory set at level 4.
If this level is not suitable for your area the softener should be adjusted.
To select a different level proceed as follows:
- Press the On/Off pushbutton on.
- Press the "SELECTION" and "DELAY" buttons simultaneously for about 2 seconds. "L4" appears in the display which corresponds to the current level.
- Press the "DELAY" button as many times as necessary until the required level appears in the display. The level increases by 1 each time the button is pressed.
- 5 seconds after this button has last been pressed, the dishwasher memorises the level selected and returns to the programme setting mode.
6
7
4
5
8
9
2
3
0
1
Level German degrees
Water hardness
French degrees
PPM
(Parts per Million)
0 - 4
5 - 8
9 - 11
12 - 17
18 - 22
23 - 28
29 - 33
34 - 39
40 - 45
46 - 50
0 - 8
9 - 14
15 - 20
21 - 30
31 - 40
41 - 50
51 - 60
61 - 70
71 - 80
81 - 90
0 - 80
81 - 140
141 - 200
201 - 300
301 - 400
401 - 500
501 - 600
601 - 700
701 - 800
801 - 900
SO239
7 PBU06UK
Filling with salt
If your water is "level 0" it is already soft and therefore there is no need to use salt. (In this case the salt refill indicator light will remain illuminated).
Salt must be used from "level 1" upward.
If you use phosphate free detergents containing enzymes, add salt in the water softener starting from
4°dH (7°TH).
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in dishwasher, especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme). This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt container.
2. Pour about 1 litre of water inside the container, or until it is full (this is necessary only before filling with salt for the first time).
3. Then using the funnel provided, pour in the salt until the container is full (approx. 1.5 - 1.8 kg).
Do not worry if water over flows from the unit when filling with salt, this is quite normal.
4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.
5. Screw on the cap tightly.
The salt container will require topping up periodically.
You are reminded of this by the "Salt refill indicator light" on the control panel which comes on when the salt has finished.
The "Salt refill indicator light" on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.
8
SR07
SAL
T
PFS07UK
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying.
The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Filling with Rinse Aid:
1. Open the container by turning the lid (A) anticlockwise.
2. Add the rinse aid until the container is completely full (approx. 110 ml). The indicator
(B) will be completely dark.
3. Top up the rinse aid when the rinse aid indicator light on the control panel flashes.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid department.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Adjusting the dose
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage). (Start from position 3). Gradually increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes.
BR01
B
BR03
BR02 m ax
6 5 4 3
2
1 m ax
6 5 4 3
2
1
A
C
9 PFR02UK
Use of detergent
Only use detergents specifically designed for use in dishwashers.
We recommend the use of Finish detergents which are available in the following options:
Finish Double Action Tablets. Each tablet has the exact amount of detergent required, simply place in the dispenser.
Finish Powder recommended for every day use.
Finish Liquid Gel ideal for every day use. As the gel is extra gentle is it recommended for fine bone china.
To fill the dishwasher with detergent proceed as follows:
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the same, you should also consult the instructions on the packet.
To help correctly dose the right amount of detergent, inside the container there are two reference marks:
- MIN = 15 ml
- MAX = 30 ml
3. Always close the lid.
4. If the programme has a prewash add the required detergent over the lid of the dispenser.
Insufficient quantities of detergent will produce poor washing results, whereas an excessive amount of detergent will not improve washing results and is also wasteful.
Using no more than the correct amount also contributes to reducing pollution.
DE07
DE02
D
MAX
MIN
10 PUD01UK
Compact detergents with enzymes
In these compact powders the environmently unfriendly components have been replaced by natural enzymes and other more biodegradable substances.
The enzymes deploy their full dirt dissolving power at a temperature as low as 50°C.
By choosing the "Bio" programmes you can therefore achieve the same cleaning results that would otherwise be achievable only with 65°C programmes and conventional detergents.
DE15
For best results we recommend the use of Finish detergents, rinse aid and salt.
EASY
POURING
PACK
N E W
DOUBL
E ACTION
FOR A
RILLIANT
HIIN
L I Q U I D G E L
P O W D E R
C O N C E N T R AT E D D I S H WA S H E R D E T E R G E N T
R I N S E
11 PUD03UK
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance.
Do not load very small items which can fall through the baskets.
Open the door and slide out the baskets to load the dishes.
The lower basket
The lower basket is designed to take saucepans, lids, plates (up to 27 cm in diameter), salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely.
The two rear rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls.
To lower the prongs:
Slightly pull them upward and let them drop down
(see picture)
To bring them back to the standing position, just pull them up again.
UI39
UI21
IEC 436 / DIN 44990
12
UI18
PBA10UK
The cutlery basket
Long bladed knives stored in an upright position are a potential hazard.
Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as knives.
Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking together.
Silver cutlery tends to go black if mixed with steel cutlery. Place it in the cutlery basket separate from the others.
Teaspoons may be loaded into the special slots provided in the cutlery basket handle.
The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart. To reassemble, reverse the procedure.
UI07
13 PBA11UK
The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses.
Glasses with long stems can be placed upside down in the raised cup racks.
Larger plates (dinner plates up to 24 cm in diameter) must be loaded in the front part of the upper basket.
Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move.
Before closing the door, ensure that the spray arms can rotate freely.
After loading or unloading your machine always close the door, as an open door can be a hazard.
Caution
To ensure proper water distribution to the upper basket, do not place dishes over the hole in the SID in the centre of the basket.
US27
US11
US04
IEC 436 / DIN 44990
14 PBA15UK
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the mechanism is engaged and the basket is stable.
When the top basket is in the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the raised cup racks.
To lower the basket to the original position:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it.
Never lift or lower the basket on one side only.
RC02
15 PBA16UK
Hints and tips
To save energy
Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing.
If necessary run the Rinse and Hold programme (see
"Washing Programmes" chart on the following page), so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme.
Do not prewash dishes under running water.
For best washing results:
Before loading remove all scraps of food and soak very heavily soiled pots and pans.
Arrange saucepans, cups and glasses etc. upsidedown.
Tilt items with convex or concave surfaces so that the water drains off easily.
Avoid contact between the dishes as far as possible.
You will improve drying results by leaving the dishwasher door ajar for at least 15-30 minutes as soon as the programme finishes.
Wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.
Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
Items not suitable for dishwashers:
The following items should not be washed in the dishwasher (unless they are sold as dishwasher proof):
Cutlery with wooden or horn handles or glued parts
bronze cutlery
saucepans with wooden handles
aluminium ware
crystal ware
leaded glass
plastic items
antique or fine decorated china
Certain types of decoration can discolour when washed in a dishwasher.
Crystal-ware and plastic objects, if not guaranteed dishwasher proof should be washed by hand.
Certain types of glass can also become opaque after being washed several times in a dishwasher.
A chemical reaction can occur between silver cutlery and stainless steel cutlery. As a precaution, do not wash together.
Iron and cast iron objects can rust and stain other items.
Aluminium tends to go black, copper, pewter and brass tend to stain.
If in doubt check with manufacturer of the item.
When buying new dishes, ensure that they are dishwasher proof.
16 PHT01UK
Washing programmes
Programme
1
Rinse and
Hold
2
Intensive
70°c
* 3
Normal 65°c with prewash
4
Normal 65°c no prewash
* 5
Bio 50°c with prewash
Degree of soil and type of load
Any.
Partial load (to be completed later in the day).
Heavy soil.
Crockery, cutlery, pots and pans
Normal soil.
Crockery, cutlery, pots and pans
Light soil.
Crockery, cutlery, pots and pans
Normal soil.
Crockery, cutlery
Recommended quantity of detergent in the dispenser in the
SID
/ /
25 g
25 g
25 g
25 g
25 g
25 g
10 g
5 g
5 g
/
/
/
Cycle description
1 cold rinse
(to avoid food scraps from sticking together).
Prewash up to 50°C
Main wash up to 70°C
2 cold rinses
1 hot rinse
Thermal dry
Cold prewash
Main wash up to 65°C
2 cold rinses
1 hot rinse
Thermal dry
Main wash up to 65°C
2 cold rinses
1 hot rinse
Thermal dry
Cold prewash
Main wash up to 50°C
2 cold rinses
1 hot rinse
Thermal dry
Main wash up to 50°C
2 cold rinses
1 hot rinse
Thermal dry
Main wash up to 55°C
2 cold rinses
6
Bio 50°c no prewash
** 7
Quick wash
55°c
Light soil.
Crockery, cutlery
Light soil.
Crockery and party crockery
8
Delicate 45°c with prewash
9
Delicate 45°c no prewash
Normal soil.
Delicate china and glassware
Light soil.
Delicate china and glassware
15 g
20 g
5 g
/
Cold prewash
Main wash up to 45°C
1 cold rinse
1 hot rinse
Thermal dry
Main wash up to 45°C
1 cold rinse
1 hot rinse
Thermal dry
10
Plate warmer
This is a programme designed both to heat plates before serving or remove dust from dishes which have not been used for a long time.
/ / 1 hot rinse
Thermal dry
* Testing programme according to IEC 436/DIN 44990
Programme 3 "Normal 65°c with prewash" with detergent type A and programme 5 "Bio 50°c with prewash" with detergent type B.
Standard place settings: 12.
Rinse aid selector on position 3.
Recommended quantity of detergent type A: 25 g in the dispenser
5 g in the SID.
** This is a special programme for quick washing (approx. 40 minutes) a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-use them promptly. Due to the shortness of this programme, no drying phase is provided (indicator light
"NO" on). Anyhow if you wish, you can select an economic drying by pressing the "ECO" pushbutton.
Remember if you select the half load option, reduce the quantity of detergent.
17 PWP14UK
Operating sequence
1. Check the filters
Ensure they are clean and properly positioned
(see cleaning instructions).
2. Press the On/Off pushbutton
3. Check that there is rinse aid and salt
The indicator lights will flash if refilling is necessary.
4. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. in it.
Slide the basket back into the machine.
5. Ensure that the spray arms can rotate freely.
6. Measure out detergent
Add the required amount of detergent into the dispenser according to the "Washing programmes" chart and close the lid.
7. Close the detergent dispenser lid
8. Close the dishwasher door
9. Set the programme
Press the programme selector button until the number corresponding to the required programme appears in the display.
The indicator lights of the phases will remain on until the programme starts.
The following options may also be selected:
Half load by pressing the corresponding button.
Eco drying by pressing the corresponding button.
Delay start by pressing the corresponding button until the required number of hours delay is setted.
10. Press the start pushbutton
If a delay start has been selected, the dishwasher starts the countdown and the number of hours to go before the programme starts appears in the display.
Once the delay set has elapsed, the programme starts automatically.
When the programme starts all the phase indicator lights turn off except the phase under way.
If you wish to interrupt the wash programme at any time, press the On/Off pushbutton. To restart the machine, press this pushbutton again and the wash programme will resume at the point at which it was interrupted.
11. At the end of the washing programme
The dishwasher will automatically stop and two zeros appear in the digital display.
All indicator lights turn off.
Only the On/Off indicator light remains on.
Depress the On/Off button to switch the dishwasher off.
Open the door.
18 POS09UK
12. Cancel the wash programme
To change or cancel a wash programme in progress depress the start button until two zeros appear in the digital display and the indicator lights are off (except On/Off indicator light).
The previous setting has been cancelled and a new programme can now be selected.
When the wash programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
In general it is not advisable to open the door while the machine is working. If the door is opened however, a safety device ensures that the machine stops.
Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape.
19 POS10UK
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.
We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A) and should be removed by rinsing the filter under running water.
To remove the drain filter:
simply pull it out by the handle.
Once cleaned, refit the filter by pushing it back to its original position until it engages.
MA04
Cleaning the large filter
(Every two months)
If necessary clean the large filter (B) on both sides under running water, using a brush.
To remove the large filter
1.
Remove the spray arm by pulling it upwards on one side.
2.
Turn the column (C) anticlockwise by 90° and then slide out the filter.
3.
Once cleaned refit it following the above instructions in reverse order.
4.
Ensure the filter is in its original position, the handle of the drain filter should be pointing towards the front of the appliance.
MA05
B
A
The dishwasher must not be used without filters.
Incorrect repositioning and fitting of the filters will produce poor washing results.
Cleaning the filters is vital to ensure correct operation of the machine.
20
C
90
°
PMC04UK
Check that the SID is not clogged with detergent residue. If necessary, rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards.
Fasten it back onto the support by turning it clockwise.
Never use your dishwasher without the SID dispenser.
Since SID also ensures correct distribution of the water to the upper spray arm, running the dishwasher without it will impair the washing results.
External cleaning
Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....).
Prolonged periods of nonoperation
If you are not using the machine for any period of time you are advised to:
1. Unplug the appliance and then turn off the water;
2. Fill the rinse aid dispenser;
3. Leave the door ajar to prevent the formation of any unpleasant smells;
4. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving house etc....):
1. Unplug it;
2. Turn the water tap off;
3. Remove the water inlet and discharge hoses;
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transport.
21
MA07
PMC06UK
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
The dishwasher is fitted with a fault indication system, and the following codes may be displayed (A1, A2, A3, A6,
A7) which can help you to determine the cause of any problems.
All indicator lights on the control panel are off (except the indicator light of the phase under way), the machine stops and a fault code appears in the display.
- press the "Start" pushbutton to reset the alarm and restart the wash programme.
If the fault code reappears in the display, before contacting your local Service Force Centre, carry out the following suggested corrective actions:
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee.
Symptom
The machine will not start
The dishwasher does not fill with water
The filters are blocked
The dishwasher will not drain
The machine is noisy
The door is difficult to close
Fault code
Indicator light
"water tap" flashes
Alarm A3 flashes in the digital display
Alarm A6 flashes in the digital display
Alarms A1, A2, A7 flashes in the digital display
22
Solution
■
■
■
■
■
The On/Off button has not been pressed.
The door has not been properly closed, (open door indicator light flashes).
The plug is not properly inserted in the power socket.
Check the plug fuse.
There is no current at the socket.
■
■
■
■
Ensure the water tap is open.
Ensure the mains water supply has not been cut off.
The inlet hose may be squashed or bent.
Reposition the hose.
The inlet hose may be blocked.
Switch off the water supply, and clean the filter.
■
■
Clean the filters (refer to “Maintenance and cleaning”).
The spray arms are not rotating. Ensure the crockery is loaded correctly.
■
■
■
■
The drain hose may be squashed or bent.
Reposition the hose.
The sink may be blocked. Clear any blockages.
The drain hose extension is not correct. Follow the instructions for connecting to the waste.
There is no vent in the end of the drain hose.
■ Switch off the dishwasher. Switch it back on and start the programme. If the alarm reappears, call the local Service Force Centre.
■
■
Dishes are rattling against each other, refer to
"Loading your machine".
The spray arms are knocking against the dishes.
Refer to "Loading your machine".
■ The dishwasher is not level, or not properly built-in.
PSN10UK
Symptom
The dishes are not clean (poor wash)
Visible lime deposits or white film on the dishes
The dishes are not quite dry
Protection against flooding
The machine is fitted with a device to protect against flooding
the device will operate if there are any water leaks in the machine, however it will only operate if the machine is on.
To repair the machine, call the Service Force Centre.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture).
Solution
■
■
■
■
■
■
■
■
■
■
The baskets are too full.
The dishes have not been arranged properly.
The spray arms do not rotate.
The spray arms are clogged.
The filters are clogged.
The filters are not in position.
Not enough detergent has been used or it is unsuitable.
The detergent is old or has gone hard.
The salt container cap is not properly closed.
The washing programme selected is too gentle.
■
■
■ The rinse aid has run out or too little is being used.
Check that there is salt and that the salt cap is tight.
Ensure the water softener has been adjusted to suit the water hardness in your area.
■ The dishes have been left too long inside the machine.
RA01
Mod. ........
Prod.No. ........ Ser. No. .........
23 PSN11UK
Service and spare parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Force Centre by telephoning:
0990 929929
Your telephone call will be automatically routed to the
Service Centre covering your post code area. Service
Centre addresses can be found in the accompanying
Customer Care book.
Before calling out an engineer, please ensure you have read the details under the heading “Something Not
Working” and have the model number and purchase date to hand.
In-guarantee customers should ensure that the checks under the heading “Something Not Working” have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.
Customer Care Department
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products please contact our Customer Care Department by letter or telephone as follows:
Customer Care Department
Zanussi
Zanussi House
Hambridge Road
Newbury
Berkshire
RG145EP
Tel: 01635 521313
24 PSN06UK
Guarantee Conditions
Standard guarantee conditions
We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:
• The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s instructions.
• The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not authoried by us.
• All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
• Any appliance or defective part replaced shall become the Company’s property.
• This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the
United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
• Products of Zanussi manufacture which are not marketed by Zanussi.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.
• The product is installed taking in account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliance.
France
Germany
Italy
Sweden
UK
Senlis +33 (0) 44 62 29 99
Nurenberg +49 (0) 911 323 2600
Pordenone +39 (0) 1678 47053
Stockholm +46 (0) 8 738 79 50
Newbury +44 (0) 1635 521313
25 PSN07UK
Installation instructions
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Ensure the machine is easily accessible for servicing when installed
Technical specifications
DIMENSIONS
ELECTRICAL CONNECTION
MOTOR RATING DURING WASH
POWER OF HEATING ELEMENT
OVERALL POWER
WATER SUPPLY PRESSURE
CAPACITY (STANDARD IEC)
PLACE SETTINGS
CONSUMPTION
Width
Height
Max depth
Max depth with open door
Voltage
Minimum
Maximum
Water
Electricity
59.6 cm
81.8 - 87.8 cm
59 cm
115 cm
220/240 V - 50 Hz
200 W
2570 W
2720 W
50 kPa (0.5 bar)
800 kPa (8 bar)
12
21 l
1.4 kW/h
26 PTS13UK
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a drain.
Water supply connections
This dishwasher must be plumbed into a cold water supply.
The water pressure must be within the limits given in the technical specifications.
Your local Water Authority will advise you on the average mains pressure in your area.
The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation.
The locknut must be correctly fitted to avoid water leaks.
Avoid bends or kinks in the hose which could prevent or slow down the water supply.
If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose filter.
27 PWA01UK
Water outlet hose connection
The end of the drain hose can be connected in the following ways:
A- To the sink outlet siphon, securing it if necessary with a clip.
B- To a wall outlet provided with a vent-hole, minimum internal diameter 4 cm.
The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the floor.
It makes no difference which way the drain hose faces, either to the right or left of the dishwasher.
Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.
C- If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.
Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.
The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.
CS11
Ø 21
Ø 18
A C
+ 2 m max
B
28 PWA04UK
Electrical connection
This appliance must be earthed.
The manufacturer declines any responsibility should this safety measures not be observed.
If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.
Important
The wires on the mains lead are coloured in accordance with the following code:
Green and Yellow
Blue
Brown
-Earth
-Neutral
-Live
If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the letter
"E" or the earth symbol or coloured green and yellow.
2. Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.
3. Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.
The plug moulded onto the lead incorporates a 13amp
BSI362 fuse. Only ASTA or BSI fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the product.
A replacement cover/carrier must be obtained from your local Service Force Centre.
This appliance complies with the following
E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent modifications.
CE03
29 PWA02UK
Building-in
It is essential that the recess dimensions indicated in the diagram are followed.
No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.
It is absolutely essential that the dishwasher is disconnected from the electricity supply before gaining access to any internal component.
Fit the dishwasher into an appropriate housing space and connect it.
The recess height may be anywhere between 820 and
880 mm from the floor since the dishwasher incorporates adjustable feet (max 60 mm).
A distance of 2 mm should be allowed between the top of the dishwasher and the counter top.
When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.
II72
596
600
Levelling
Good levelling is essential for correct closure and sealing of the door.
When the appliance is correctly levelled, the door will not catch on the levelling spacers, either side of the cabinet.
If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.
IN11
IN12
30 PFI21UK
The furniture door plinth
The door on this appliance is designed for the overlay of a door plinth having the following dimensions:
Width:
Height:
596 mm
50 mm (min) - 120 mm (max)
Thickness: 20 mm max
The panel height should be no more than indicated, otherwise complete opening of the door will no longer be possible as the panel hits against the dishwasher plinth.
II71
Mounting the furniture door
1. Drill the panel with a Ø 2 x 12 bit according to the dimensions indicated in the figure.
2. Fix the panel to the cross bar provided with 2 screws
3.5 x 16.
3. Fix the cross bar to the dishwasher door with 2 screws
3.5 x 16 after having inserted the two hooks of the cross bar on the lower section of the door.
II69
23
II70
31 PFI22UK
Adjusting the door balance
The door of the dishwasher is balanced when it is open in any position.
Fitting the decor panel may sometimes affect this balance. In this case it will be necessary to adjust the balance as follows:
Half-open the door and regulate the screws located on the kick plate.
By screwing or unscrewing these screws, the tension of the door balancing springs is increased or decreased respectively.
The weight of the panel should be within the limits given in "The furniture door" otherwise balancing the door will not be possible.
II08
Fixing to the adjacent units
To prevent the dishwasher tilting, it must be secured to either the worktop or adjacent kitchen cabinet/wall using the brackets supplied.
Insert the two fixing brackets into the slots provided in the top front part of the dishwasher as shown in the figure.
Secure the brackets to the adjacent units with the
3.5 x 16 screws using the upper or the side holes.
The appliance must be secured to the underside of the worktop using the brackets provided.
Failure to do this could cause damage or injury.
II54
32 PFI23UK
Kitchen plinth adjustment
To allow correct opening of the door it is sometimes necessary to cut the kitchen plinth. Refer to the cutting table.
According to dimensions (a) and (b) as shown on the figure, you will find on the following table the depth (x) of the cut to be made on the plinth.
The dimensions (a) and (b) of the table are those most frequently used in the kitchen furnitures.
II59
33
II15 a b
Height (a)*
170 160 150 140 130 120 110 100
40 136 131 125 118 110 100 93 85
50 135 131 125 118 110 102 92 85
60 137 132 125 118 110 102 94 85
70 138 134 128 120 110 104 95 85
80 / 139 130 124 115 105 98 88
90 /
100 / /
/ 138 129 120 110 100 90
/ 135 125 115 105 95
(*) dimensions in mm
600 mm minimum
X
X
Dimensions of the cut on the plinth
PFI06UK
0 06/98
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project