EMBERTON III
PORTABLE LOUDSPEAKER
FULL ONLINE MANUAL
CONTENTS
INDEX
Getting started.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 005
Using the control knob. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 005
Charging the speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 005
Battery indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 005
Cleaning the speaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 006
Battery care guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 006
Pairing a new device.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 007
Resetting the speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 007
Troubleshooting.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 008
EMBERTON III – FULL ONLINE MANUAL
003
DEVICE LAYOUT
ENGLISH
3
2
4
5
1
7
6
BACK TO INDEX
EMBERTON III – FULL ONLINE MANUAL
004
DEVICE LAYOUT
ENGLISH
1
POWER BUTTON
Push and hold the power button to turn the speaker on or off.
2
BLUETOOTH BUTTON
Push and hold the Bluetooth® button until the LED turns to a slow blue
pulse to start pairing mode.
3
MICROPHONE
The microphone lets you use Emberton III as a speaker phone. Push
the Bluetooth button to toggle the call between the speaker and
your phone.
4
CONTROL KNOB
Use the control knob to manage your music playback, phone calls
and more.
5
BATTERY INDICATOR
The 10-segment battery indicator shows the battery charge.
6
USB-C POWER INPUT
Charge the speaker by plugging in a USB power source via the
included USB-C lead.
7
STRAP ANCHOR
The strap anchor provides a fastening point for a carry strap or your
personal charm (not included).
BACK TO INDEX
EMBERTON III – FULL ONLINE MANUAL
005
INSTRUCTIONS
ENGLISH
GETTING STARTED
I. Push and hold the Power button until the speaker turns on.
II. Push and hold the Bluetooth button until the LED turns to a slow
blue pulse.
III. Select EMBERTON III from your audio device’s Bluetooth list.
USING THE CONTROL KNOB
• Play/pause – push once
• Skip backward/forward – push left/right
• Turn up/down the volume – push up/down
• Receive/end a call – push once
• Reject a call – push twice
CHARGING THE SPEAKER
Use the included USB-C cable to connect the speaker to a USB power source
(5 V, 3 A). The USB-C power input port is located on the right side of the
speaker.
Note: Always make sure that the speaker is completely dry before charging it.
BATTERY INDICATOR
The 10-segment battery indicator shows the battery charge. A rising
animation indicates that the battery is charging.
BACK TO INDEX
EMBERTON III – FULL ONLINE MANUAL
006
INSTRUCTIONS
ENGLISH
CLEANING THE SPEAKER
Clean your speaker regularly to keep it fresh and last longer.
Unplug any leads before cleaning the speaker and make sure everything is
completely dry before plugging in a USB charger.
The silicone sleeve can be removed and cleaned separately. Gently clean it
and the leads with a lint-free cloth, slightly damp with either:
• water,
• 70% isopropyl alcohol, or
• 75% ethyl alcohol
Carefully clean the speaker mesh and openings with a dry and soft brush,
or a cotton swab.
• Do not use any sharp or metal objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the speaker in any cleaning agents.
• Do not rinse the speaker under running water.
BATTERY CARE GUIDE
Your speaker comes equipped with high-performance lithium-ion batteries
with a life span that is affected by charging and usage. Follow the guidelines
below to keep your battery in great condition for as long possible.
• Avoid using fast chargers if possible. Fast charging causes stress on the
battery and will degrade it.
• Avoid letting the battery drain completely or charging it when it’s already
full. Try to keep the charge between 30% and 80%.
• If the speaker is stored for a long time, it is recommended to charge
the speaker to about half-charge and then do a factory reset. Store the
speaker in a cool, dark, and dry place.
• Avoid using or charging the speaker in hot and unventilated places,
45°C/113°F and above, such as in a parked car or by a window in
direct sunlight.
• Avoid charging the battery at low temperatures, below 10°C/50°F and
using the speaker below 0°C/32°F.
• Avoid strong mechanical shocks such as dropping the speaker on hard
surfaces as it might harm the batteries.
Download the Marshall Bluetooth app and select the battery preservation
level that best suits you and your speaker.
BACK TO INDEX
EMBERTON III – FULL ONLINE MANUAL
007
INSTRUCTIONS
ENGLISH
PAIRING A NEW DEVICE
Emberton III can be connected with 2 devices at a time and remembers up to
8 previously paired devices. When in range, it will try to reconnect with the
last connected device.
I. Push and hold the power button until the speaker turns on.
II. Push and hold the Bluetooth button until the LED turns to a slow
blue pulse.
III. Select EMBERTON III from your audio device’s Bluetooth list.
RESETTING THE SPEAKER
A factory reset will reset the speaker to its original settings, excluding any
firmware updates.
Note: This will delete all user settings and the speaker will need to be set up
again.
I. Remove EMBERTON III, and EMBERTON III [LE] if present, from your
sound device’s Bluetooth list.
II. Ensure that the speaker is on.
III. Push and hold the Bluetooth button for 7 seconds. The Bluetooth
indicator turns quickly red, and the speaker restarts.
IV. The speaker has returned to its factory settings and is ready to be paired,
see the section Getting started.
MARSHALL BLUETOOTH APP
Download the Marshall Bluetooth app to get the most out of your
speaker and keep it up to date with the latest software.
GET IT ON
BACK TO INDEX
EMBERTON III – FULL ONLINE MANUAL
008
TROUBLESHOOTING
ENGLISH
PROBLEM
CAUSE
ACTION
The speaker does
not turn on
The battery has
no charge.
Plug the speaker
into a USB power
source to charge it.
Cannot connect
or pair with a
Bluetooth device
Bluetooth is not
enabled on your
device (smartphone,
tablet, computer).
Activate Bluetooth on
your playback device.
The speaker is not
in pairing mode.
Make sure that the
speaker is turned on
before setting it in
pairing mode, see
Pairing a new device.
The speaker is not
using the latest
firmware version.
Download the Marshall
Bluetooth app and
connect to the
speaker. Follow the
in-app instructions to
ensure that Emberton
III has the latest
firmware version.
There is a
software error.
Perform a factory
reset, see Resetting
the speaker.
Erratic behaviour
Emberton III needs
to be set up again.
BACK TO INDEX
EMBERTON III – FULL ONLINE MANUAL
009
TROUBLESHOOTING
ENGLISH
PROBLEM
CAUSE
ACTION
Bluetooth connection
drops out
The Bluetooth devices
are too far apart, or the
connection is affected
due to obstacles.
Move the devices
closer to each other
so that they are
unobstructed by
obstacles such as
walls or doors.
There is a strong
electric field
surrounding the
speaker. Items such
as microwave ovens,
wireless network
adapters, fluorescent
lights and gas cookers
use the same frequency
range as the Bluetooth
device. This may lead to
electrical disturbances.
Move the speaker to
another spot or turn off
or move the interfering
electronic device.
BACK TO INDEX
All intellectual property in the product and packaging (including the MARSHALL trade mark,
copyright, designs, and patents) are owned by Marshall Group AB and may not be used without
permission. All rights reserved. The Bluetooth® wordmark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and any use of such marks by Marshall Group AB is under license.
Google Play is a trademark of Google LLC. App Store is a service mark of Apple Inc., registered in the
U.S. and other countries Marshall Group AB, Centralplan 15, 111 20 Stockholm, Sweden. R 1.1
">