1
Step 2: Turn off the Circuit Breaker for
your Doorbell
NOTE The Amcrest Chime Kit is used to regulate power to
your existing chime so that your doorbell will function properly.
Installing Your Chime Kit
Since we will be working with
electrical wiring, it’s important to
shut off the power to your
doorbell at the electrical breakers
of your home to ensure no power
is flowing through the doorbell
system.
Step 1: Connect the Wire Harness to the
Chime Kit
How can we help?
WHAT’S INCLUDED
We are dedicated to
providing the highest
quality support to our
customers and are
available 7 days a week.
Online Quick Start Guide
amcrest.com/support
Need help?
[email protected]
Amcrest Chime Kit Wire Harness
2
3
4
Step 3: Remove Your Existing Chime Cover
Step 4: Loosen the Screws on Your
Existing Chime
Look for two connected wires. They may be labeled “FRONT” and
“TRANS”.
Using the included screwdriver, loosen the screws labeled “FRONT”
& TRANS”. If the there are no labels, simply loosen the two
terminals that have exisiting wiring attached.
Step 5: Connecting the Amcrest Chime Kit
Step 6: Replace Your Chime Cover
Slide the connecting wires from the Amcrest Chime Kit underneath
the screws, then retighten the screws. It doesn’t matter which wires
connect to which terminal.
Secure the Amcrest Chime Kit using the included adhesive. If you
are using a mechanical chime, ensure any excess wiring is clear of
all moving parts.
REAR TRANS FRONT
REAR TRANS FRONT
NOTE Your existing chime may look different, depending
on if you have a digital or mechanical chime.
5
NOTE Be careful not to detach or remove the existing
wiring.
6
7
NOTE Please refer to booklet 2, “Installing Your Wi-Fi
Doorbell” for instructions on how to install the doorbell.
8
">
