advertisement
Dolphin
™
6100 Mobile Computer
with Windows
®
CE 5.0
User’s Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights are reserved.
No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
Web Address: www.honeywellaidc.com
Trademarks
Dolphin, Dolphin RF, HomeBase, Net Base, and QuadCharger are trademarks or registered trademarks of Hand Held Products, Inc. or Honeywell International Inc.
Microsoft, Windows, Windows Mobile, Windows CE, Windows NT, Windows 2000, Windows ME,
Windows XP, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of
Microsoft Corporation.
Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are the property of their respective owners.
Patents
For patent information, please refer to www.honeywellaidc.com/patents .
Other Trademarks
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell
International Inc.
©2011 Honeywell International Inc. All rights reserved.
Table of Contents
Chapter 1 - Agency Approvals
Chapter 2 - Getting Started
Chapter 3 - Terminal Hardware Overview
Chapter 4 - Using the Keypad
iii
Chapter 5 - Using the Image Engine
Chapter 6 - Using the Laser Engine
Chapter 7 - Communication
Chapter 8 - Bluetooth Handler
Chapter 9 - Dolphin HomeBase/eBase Device
Chapter 10 - Dolphin 6100 Net Base Device
iv
Chapter 11 - Dolphin QuadCharger Device
Chapter 12 - Customer Support
v
vi
1
Agency Approvals
Label Locations
Dolphin 6100 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully before using your mobile computer.
Compliance Label
Laser Light Label
Laser Light Label
LASER LIGHT. DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1.0 mW MAX OUTPUT: 650nM
IEC 60825-1:1993+A1+A2
Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
1 - 1
Safety & RF Approvals by Country:
Country
U.S.A.
Canada
European
Community
China
Japan
Australia
Brazil
Mexico
New Zealand
Safety
UL60950-1 cUL60950
RF (Radio)
FCC Part 15, Sub part B
ICES-003, RSS 210
IEC/EN 60950-1
EN60825-1:1994 + A11 + A2
EN 55022 (CISPR 22) Class B
EN55024:1998
EN300 328
EN301 489-1
EN301 489-7
EN301 489-17
IEC 62209-2
CCC SRRC
PSE AIRB
EN60950 AS/NZS4268
NOM
EN60950
ANATEL
COFETEL
AS/NZS4268
R&TTE Compliance Statement—802.11b/g and/or Bluetooth
Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/
EC).
This product is marked with
0983
!
in accordance with the Class II product requirements specified in the R&TTE Directive, 1999/5/EC. The equipment is intended for use throughout the European
Community; PAN European Frequency Range: 2.402–2.480 GHz.
Restrictions for use in France are as follows:
• Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz
• Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band & maximum power
(EIRP*) of 10 mW for the 2.454–2.483 MGHz band.
Low Voltage Directive
The CE Mark on the product indicates that the system has been tested to and conforms with the provisions noted within the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/
EEC and 93/68/EEC Low Voltage Directive. Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.
For further information, contact:
Honeywell Imaging & Mobility Europe BV
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands
1 - 2
Laser Safety Label
If the following label is attached to your product, it indicates the product contains a laser engine or laser aimer.
Laser Eye Safety Statement: This device has been tested in accordance with and complies with IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and 1040.11, except
LASER LIGHT. DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1.0 mW MAX OUTPUT: 650nM
IEC 60825-1:1993+A1+A2
Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
for deviations pursuant to Laser Notice No. 50, dated July 26, 2001. LASER LIGHT, DO NOT STARE
INTO BEAM, CLASS 2 LASER PRODUCT, 1.0 mW MAX OUTPUT: 650nM.
This class 2 laser product is in accordance with the requirements of IEC60825-1 Ed. 1.2 Clause 6.2(a).
Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
LED Safety Statement
The LED output on this device has been tested in accordance with IEC60825-1 LED safety and certified to be under the limits of a Class 1 LED device.
CB Scheme
Certified to CB Scheme IEC 60950-1.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Dolphin RF Terminal—802.11b/g and/or Bluetooth
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.”
This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction is the responsibility of the user. Use only shielded data cables with this system.
In accordance with FCC 15.21, changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
1 - 3
!
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To maintain compliance with FCC RF exposure guidelines for bodyworn operation, do not use accessories that contain metallic components.
CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) installed outdoors is subject to licensing.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
For European Community Users
Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Waste Electrical and Electronic Equipment Information
This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed.
In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a sound way.
The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal.
If you need more information on the collection, reuse, and recycling systems, contact your local or regional waste administration.
You may also contact your supplier for more information on the environmental performances of this product.
Anatel
Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução 242/2000, e atende aos requisitos técnicos aplicados.
Para maiores informações, consulte o site da ANATEL - www.anatel.gov.br.
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
2474-09-4741
1 - 4
2
Getting Started
Out of the Box
Verify that your carton contains the following items:
• Dolphin 6100 mobile computer (the terminal)
• Main battery pack (3.7v, Li-ion)
• AC power supply
• Localized plug adapters
Service and Repair on page 12-1.
Step 1. Install the Main Battery
The Dolphin 6100 is shipped with the battery packaged separate from the unit. Follow the steps below to install the main battery.
1.
Release the strap making it convenient to reach the door.
2.
Remove the battery compartment door by turning the door’s pins upward and removing the door.
3.
Insert the battery into the battery well with the labels facing upward.
4.
Replace the door with a hinging motion and turn the pins downwards.
Cover Locks
Main Battery
Note: The battery door must be installed prior to booting the unit.
5.
Tighten the hand strap.
!
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.
2 - 1
Step 2. Charge the Batteries
Dolphin 6100s ship with both the main battery pack and internal backup battery significantly discharged of power. Charge the main battery pack with the Dolphin charging cable for a
minimum of 4 or 6 hours depending on your
battery before initial use.
1.
Attach the appropriate plug adapter to the plug of the power cable.
2.
Insert the plug into the appropriate power source.
3.
Plug the Dolphin power cable into the DC
Power Jack (see page 3-11) on the bottom
end of the unit.
Note: If you remove the battery pack or it completely discharges, there is a 30 minute window in which to insert a charged battery pack before the backup battery completely discharges. If your backup battery completely discharges, the contents of the RAM memory will be lost. If your backup battery is less than fully charged, there is a proportionally smaller window of time available.
LED Indicators
Red LED On
Charging
Green LED On
Battery is full or fully charged
2
3
1
!
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-
Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
DO NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source
.
Step 3. Boot the Terminal
The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process.
When the boot process is complete, the Desktop appears, and the terminal is ready for use.
2 - 2
Desktop
Note: You can access the Desktop any time by tapping the Change Views icon in the command bar and selecting
Desktop on the popup menu.
Tap to change views
Command Bar Icons
The command bar, located at the bottom of application screens, provides access to many system functions and programs.
Icon
Left and right arrows are used to scroll through additional icons
Meaning
Opens the Start menu.
Changes views between open applications or returns to the Desktop.
Accesses the Bluetooth radio. Double tap this icon to open the Bluetooth Handler (see page 8-1).
Shows signal strength of WiFi radio. (A red X indicates the terminal is not currently associated to an AP.)
Double tap to configure your WLAN Secure Wireless Client. For complete configuration instructions, download the Honeywell Secure Wireless (SWC) Client User’s Guide from www.honeywellaidc.com
.
Indicates that the USB communication cable is connected. Double tap to display USB status window.
2 - 3
Icon Meaning
Indicates the status of battery power. Double tap to open the Power control panel setting.
When this icon shows a red power plug, it indicates the device is using external power.
Displays the current time. Double tap to change the time and date.
Indicates whether the keypad is standard alpha (upper and lower case), all caps alpha, or in numeric mode. Press the ALPHA button on the keypad to switch modes.
The up arrow allows you to turn the Wireless LAN and Bluetooth connection on or off. It also allows you to toggle between the Keypad and Transcriber. When Keypad is selected, a keypad is displayed so you can tap text and number keys. Transcriber recognizes handwriting and symbols entered using the stylus.
Using the Stylus
The terminal comes with a stylus included in a loop on the hand strap. Use this stylus (or your finger) to select or enter information on the touch screen. The stylus functions as a mouse; generally, a tap is the same as a click.
Tap
Tap the touch screen once or double tap to open menu items and select options.
Drag
Tap & hold
!
Hold the stylus on the screen and drag across the screen to select text and images.
Tap and hold the stylus on an item and a pop-up menu appears. On the pop-up menu, tap the action of the task you want to perform.
Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel and may cause damage not covered by the warranty.
For more information about the touch screen, see Touch Screen Display on page 3-2.
2 - 4
Selecting Programs
Tap Start -> Programs. To open a program, tap the icon on the menu.
Pop-Up Menus
You can quickly choose an action for an item using the pop-up menus.
1.
Tap and hold the stylus on the item name. The pop-up menu appears.
2.
Lift the stylus and tap the action you want to perform.
The contents of pop-up menus change according to the program you are using.
Using Windows Explorer
Use Windows Explorer to navigate through the files on your system. On the desktop, double tap the My
Device icon and Windows Explorer opens to the root level.
Move files by tapping and holding on the file, then tapping Cut, Copy or Paste on the pop-up menus that appear.
2 - 5
2 - 6
3
Terminal Hardware Overview
Dolphin 6100 terminals include a number of standard terminal configurations as well as charging and communication peripherals and accessories to maximize the efficiency of your application setting.
Standard Terminal Configurations
There are two standard Dolphin 6100 configurations: WPAN only and WPAN/WLAN. Both configurations include the following options; however, the WPAN/WLAN configuration has both a Bluetooth radio and an
802.11b/g radio.
Dolphin 6100 WPAN and WPAN/WLAN
• Microsoft Windows CE 5.0
• Marvell PXA 300 624MHz
• 128MB RAM X 128 MB (non-volatile) Memory
• 28-key numeric keypad
• 2.8” 1/4 VGA transmissive active matrix color display
• Standard Capacity: Li-ion battery: 3.7V /
2200mAh / 8.1 Wh or Extended Capacity: Li-ion battery: 3.7V / 3300mAh / 12.2 Wh (with extended battery door)
• 5300SR image engine
• (WPAN) - Bluetooth radio
• (WPAN/WLAN) - Bluetooth and 802.11b/g radio
• Dolphin power cable (included with each
Dolphin 6100)
3 - 1
Front Panel Features
LED
Touch Screen
Display (screen protector installed at the factory)
Scan key
Navigation keys
Keypad
(28-key numeric)
Power key
Software
Reset key
Scan/Decode LED
Note: The LED is user-programmable.
LED Color
Red
Green
Blue
Red
Meaning
Lights when Scan button pressed in scanning applications.
Lights when main battery is charging.
Lights when scanned ba code is successfully decoded.
Lights when main battery charging has completed.
Flashes during a Soft Reset.
Flashes during a Hard Reset
Keypad
A 28-key numeric keypad is included on the unit.
Microphone
The integrated microphone can be used for audio recording.
Touch Screen Display
The display is a LCD (Liquid Crystal Display) with a 4-wire analog resistive touch screen. The
2.8” (1/4) VGA (Video Graphic Array) is transmissive active matrix color and backlit. The
resolution is 240 x 320; see Display Backlight on page 3-3.
3 - 2
!
Dolphin 6100s ship with a screen protector already installed over the touch screen to help prevent damage to the touch screen. Do NOT remove this screen protector before initial use. Honeywell recommends using screen protectors, especially for applications that
require high volume interfacing with the touch screen. For more information, see Using
Screen Protectors on page 3-3.
You can purchase additional screen protectors by contacting your Honeywell sales representative.
For touch screen input, use the stylus included with the terminal or your finger. The method you choose depends on which one is most appropriate for your application. While there is a great deal of variation in different applications, you generally achieve greater accuracy with the stylus for buttons or icons that are close together.
!
Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel and may cause damage not covered by the warranty.
Display Backlight
The intensity of the backlight of the touch screen display may be changed, and the backlight may be programmed to turn off after the terminal has been idle for a specified period of time.
To adjust the intensity of the backlight while on battery power, tap Start -> Settings -> Control Panel -> double tap Backlight.
Screen Backlight - Battery/External Power
Move the slider to adjust the screen backlight while on battery power.
You may turn the screen backlight off if the device is not used for a designated period of time by checking the option and designating the desired time period.
You may also turn on the screen backlight when a button is pressed or the screen is tapped by selecting the appropriate checkbox.
Note: Using the backlight option while on battery power substantially reduces battery life.
You may make the same changes when on external power by tapping the
External tab.
Keypad Backlight
The intensity of the backlight of the keys on the keypad may be changed and the backlight may be programmed to remain on for a specified period of time once a key is pressed.
To adjust the brightness of the keys, tap the Keypad tab. Move the slider to adjust the backlight while on battery power.
To turn on the keypad backlight, check the checkbox and change the duration of the backlight.
Using Screen Protectors
Honeywell recommends using a screen protector and stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high-to-medium level of interface with the touch panel.
3 - 3
Honeywell continues to advocate the use of screen protectors on all Dolphin terminals. We recommend implementing a screen protector replacement program to ensure that screen protectors are replaced periodically when signs of damage/wear are noticeable. Replacement screen protectors can be purchased directly from Honeywell. Contact a Honeywell sales representative for details.
Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than
0.8mm. Use of the Honeywell stylus included with the terminal is recommended at all times.
Honeywell’s warranty policy covers wear on the touch panel for the first 12 months provided that a screen protector is applied and an approved stylus is used for the 12-month duration covered by the warranty.
Removing the Screen Protector
Dolphin 6100s ship with a touch screen protector already installed. To replace the screen protector, you must remove the one already installed.
1.
Press the Power key to put the terminal in Suspend Mode.
2.
Using a strong, flat, plastic card (e.g., credit card) wedge the edge of the card under the existing screen protector. Catch the edge of the screen protector and pull it up and away from the touch panel.
Note: If you have one, you can also use the small plastic squeegees designed for touch panels.
3.
Wipe the screen with a clean, non-abrasive, lint-free cloth.
Note: Use ionized air, if available, to blow additional dirt or particles off the touch panel.
Installing Your Screen Protector
When installing a new screen protector, use a flat plastic card (e.g., credit card) to apply the screen protector smoothly and remove any air bubbles.
Note: If you have one, you can also use the small plastic squeegees designed for touch panels.
1.
Press the Power key to put the terminal in Suspend Mode.
3 - 4
2.
Clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure nothing is on the touch panel.
3.
Release the left edge of the backing paper on the screen protector.
4.
Align the exposed edge of the screen protector along the left edge of the touch panel.
Make sure that it lies flush with edges of the touch panel.
Backing Paper
Screen Protector
Note: To reposition the screen protector, lift up gently and reapply.
5.
Use the card on top of the screen protector to smooth it out as you pull on the backing paper.
3 - 5
6.
Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Use the card as necessary to smooth out any air pockets or bumps after application.
7.
Press the Power key to wake the terminal and check the touch panel with the stylus.
8.
Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector.
9.
Press the Power key to put the terminal back in Suspend Mode.
10. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth.
11. Press the Power key to wake the terminal again.
3 - 6
12. For maximum performance, recalibrate the screen. Tap Start -> Settings -> Control Panel -> double tap Stylus -> Calibration tab.
13. Tap Recalibrate and follow the instructions on the screen.
3 - 7
Back Panel Features
Image Engine Window
Speaker
Finger
Saddle
Installed Battery
Hand Strap (with Stylus)
Hand Strap
The Dolphin 6100 comes with an adjustable, elastic hand strap. The strap is attached to the device with the two small screws. It is threaded through the slot on the bottom of the back of the unit.
Keep in mind that the hand strap covers the battery. When you want to replace the battery, you will need to adjust the hand strap accordingly.
Finger Saddle
This is a slightly depressed and angled area of the back housing that is designed to cradle or
“saddle” your finger while holding the terminal. This unique ergonomic design makes the terminal comfortable to hold and helps prevent you from accidentally dropping the terminal.
Installed Battery
For information about installing the battery, see Changing the Main Battery Pack on page 3-13.
For information about battery power, see Battery Power on page 3-12.
Speaker
The integrated speaker sounds audio signals as you scan bar code labels and enter data, but emits no ambient noise on system activity (i.e., processor, memory access, radio traffic, etc.).
The speaker can also be used for playing sounds (e.g., WAV or MP3 files).
The speaker meets the following SPL levels at 40cm:
• 500Hz–67db
• 1KHz–72db
• 4KHz–72db
Stylus
Dolphin 6100 terminals ship with a stylus inserted in a loop on the hand strap. Store the stylus
in the hand strap when you’re not using it; see Using the Stylus on page 2-4.
3 - 8
Left Side Panel Features
Micro SD Slot
Side Button
Side Button
There is a button like this on both side panels. You can use the Programs Buttons option in the Control Panel to change the functionality of the side buttons.
Side Door
The rubber door on the left side panel provides access to the Micro SD slot.
When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating.
Installing Memory Cards
The Dolphin 6100 supports Micro Secure Digital (SD) memory cards. 2GB and 4GB cards have been tested for reliability. Please contact your Honeywell sales representative for available qualified card options.
To install an SD card
1.
Press the Power key to put the terminal in Suspend Mode; see Suspend Mode on page 3-16.
2.
Open the access door on the left side.
3.
Insert the SD card with the label facing upward.
Note: To remove an installed SD card while the access door is open, tap on the edge lightly to unlock the card; the card will pop out just enough for you to grab its edge and pull it out.
4.
Replace the access door.
The rubber door is required for 1) proper functioning of the SD card and 2) preserving the environmental rating for water sealing. Do not remove the rubber door.
Note: Do not use the terminal when the access door is open. When this door is fastened securely and properly, the memory interface is sealed against moisture and particle intrusion, read/write data is stored securely, and the terminal’s environmental rating is preserved.
5.
Tap the Power key to resume operation.
6.
To verify that the operating system recognizes the new memory card, open Windows Explorer and navigate to My Device\Storage Card.
3 - 9
Right Side Panel Features
Side Button
Headset
Jack
Headset Jack
The rubber door on the right side panel provides access to the headset jack. This is a 2.5mm audio jack that supports a headset with a mono speaker and microphone.
When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating.
Side Button
There is a button like this on both side panels. You can use the Programs Buttons option in the
Control Panel to change the functionality of the side buttons.
Top Panel Features
Image Engine
Window (with engine)
Image Engine Window
The angled image engine reads and decodes most popular bar code symbologies and takes
images like a digital camera. For more information, see Using the Image Engine on page 5-1.
3 - 10
Bottom Panel Features
DC Power Jack
I/O Connector
DC Power Jack
The DC power jack receives external power from the Dolphin power cable that is included with the terminal. When connected to the Dolphin power cable, the terminal is powered and the main battery pack is charging.
I/O Connector
The I/O mechanical connector is designed to work exclusively with Dolphin 6100 peripherals and cables. This connector powers the terminal, charges the main battery, and facilitates communication. This connector supports full speed USB 1.1 communication (up to 12 Mbps) and RS-232 communications with a maximum speed of 115Kbps and seven baud rate settings.
Through this connector, you can communicate with a host workstation via Microsoft
ActiveSync; see ActiveSync Communication on page 7-2.
The I/O connector supports the following signals:
DC IN
Transmitted Data
Request To Send
USB Host +5V
USB Host D+
USB Host D-
USB Host Detect
Clear To Send
Received Data
GND
RS-232 Shutdown
USB Client D+
USB Client D-
USB Client +5V
Note: Signals referenced are for a DTE device.
Dolphin Peripherals/Accessories for the Dolphin 6100
The following items are sold separately and enhance your Dolphin 6100’s capabilities.
3 - 11
Dolphin HomeBase
™
Device
This charging and communication cradle supports USB and RS-232 communication, enabling your terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base, its main battery pack charges in four hours for the standard capacity 2200mAh pack and in six hours for the extended capacity 3300mAh pack.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see Dolphin HomeBase/eBase Device on page 9-1.
Dolphin eBase
™
Device
The Dolphin eBase is used to charge the main battery, to power the battery charging system in the terminal, and can be used to communicate data from the terminal to a PC/laptop via the Ethernet port.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see Dolphin HomeBase/eBase Device on page 9-1.
Dolphin Net Base Device
The Dolphin Net Base enables up to four Dolphin 6100 mobile computers to communicate with a host device over an Ethernet network. In addition, the Net Base provides a second RJ45 Ethernet port for connection to an additional device, such as a printer, workstation, eBase, or another Net Base.
For more information, see Dolphin 6100 Net Base Device on page 10-1.
Dolphin QuadCharger
™
Device
The Dolphin QuadCharger device, a four-slot charging station for Dolphin Li-ion battery packs, can charge each battery in four hours (2200 mAh) or six hours (3300 mAh).
For more information, see Dolphin QuadCharger Device on page 11-1.
Dolphin USB Communication Cable
The Dolphin USB Communication Cable is used when communicating between the terminal and a PC/ laptop via the USB port.
Li-ion Battery Packs
For information on how to purchase these items, contact a Honeywell sales representative.
Battery Power
The intelligent battery technology inside the terminal features two types of battery power:
• The main battery pack
• The backup battery located inside the terminal (see Internal Backup Battery on page 3-15)
Both batteries work together to prevent data loss when the terminal is used over long periods of time.
3 - 12
Both batteries must be charged to full capacity before using the Dolphin 6100 for the first time!
Charge the main battery pack with the Dolphin charging cable for a minimum of 4 or 6 hours depending
on your battery before initial use.
Main Battery Pack
!
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.
There are two Li-ion battery packs available for the Dolphin 6100:
Standard Capacity:
Li-ion 3.7V/2200mAh/8.1Wh
Extended Capacity:
Li-ion 3.7V/3300mAh/12.2Wh
The Li-ion battery pack is the primary power source for the Dolphin terminal as well as for the internal backup battery.
Changing the Main Battery Pack
16) so that operations are suspended before removing the main power source. Always put the terminal
in Suspend Mode prior to changing the battery. The Dolphin 6100 is shipped with the battery separate from the unit. You will need to loosen the hand strap, remove the battery door, insert the battery, and replace the battery door. Refer to the instructions included in Installing the Main Battery
Note: The battery door must be installed prior to booting the unit.
Cover Locks
Main Battery
Charging Options
When the battery is installed in the terminal, you can use any of the peripherals listed below to charge the battery.
•
Dolphin HomeBase/eBase Device (see page 9-1)
• Dolphin Comm/Charge Cable; Connecting the USB Charging/Communication Cable (see page 7-2)
You may charge the device using the USB connection if you do not have a wall adapter. There are two options that allow either 100mA or 500mA of current over the USB connection. Access the option by selecting Start -> Settings -> Control Panel -> Power -> USB Charging.
To fully charge the Li-ion battery before installing it in the terminal, use the
•
Dolphin QuadCharger Device (see page 11-1) or insert the battery in the spare battery charging well
in the back of either the Dolphin HomeBase or Dolphin eBase.
3 - 13
Charging Time
The standard capacity 2200mAh Li-ion battery pack requires four hours to charge to full capacity, while the extended capacity 3300mAh pack requires six hours.
Managing Main Battery Power
Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a continuous power supply to the terminal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the Dolphin. If the main battery pack is low, insert the terminal into a charging peripheral to power the terminal and begin recharging the battery.
Note: If the main battery is low and the terminal is in Suspend Mode, pressing the
Power
button does
not
wake the Dolphin 6100 terminal; you must replace the discharged battery with a fully charged battery or apply AC power to the terminal.
Checking Battery Power
Power icons appear in the command bar at the bottom of the window. Double tap the battery icon to open the Power Properties. The Battery tab opens displaying the charge status of both the main and backup batteries.
Note: You can also check battery power by tapping
Start -> Settings -> Control Panel ->
double tap
Power
.
Storage Guidelines
To maintain optimal battery performance, follow these storage guidelines:
• Avoid storing batteries outside the specified range of -4 to 140° F (-20 to 40°C) or in extremely high humidity.
• For prolonged storage, it is recommended that the battery be at a 40% - 50% charge level, be removed from the device, and stored in a controlled temperature environment. Following these recommendations will maximize battery life.
Guidelines for Battery Pack Use and Disposal
The following are general guidelines for the safe use and disposal of batteries:
• We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may pose a personal hazard to the user.
• DO NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source
.
• Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.
3 - 14
• Never throw a used battery in the trash. It contains heavy metals and should be recycled according to local guidelines.
• Don’t use a battery in any other manner outside its intended use in Dolphin terminals and peripherals.
• Don’t short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury.
• Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power.
• If you observe that the Honeywell battery supplied is physically damaged in some way, send it to
• Although your battery can be recharged many times, it will eventually be depleted. Replace it after the battery is unable to hold an adequate charge.
• If you are not sure the battery or charger is working properly, send it to Honeywell International Inc. or an authorized service center for inspection.
Internal Backup Battery
Located inside the terminal, the backup battery is a 3.7V Lithium Polymer battery.
The internal backup battery prevents the terminal from being reset when you remove the main battery pack. This backup battery retains RAM data and allows the real-time clock to remain operational for at least 30 minutes. If the terminal is left without the main battery pack for more than 30 minutes, the internal backup battery discharges and needs to be recharged to function according to specifications.
Note: Even if the internal backup battery fails, data and programs stored in Flash memory (\\Honeywell\AutoInstall) or on an optional SD card are not lost. However, the terminal automatically cold boots when you install a fully charged battery pack, and you need will to reset the Real-Time Clock.
Charging
The internal backup battery charges off the main battery pack and requires 2 hours charge time to backup
RAM data for 30 minutes. You can begin using the Dolphin terminal after charging the main battery for four or six hours (depending upon your battery); however, the internal backup battery will continue to charge off the main battery.
To ensure that the internal backup battery functions properly, maintain a consistent power supply for the first eight hours of terminal operation. This power supply can be external power (using a charging peripheral) or an installed, charged battery pack or a combination of both.
Resetting the Terminal
Soft Reset: Using the stylus press and release the
Reset
button. This resets RAM and reloads the OS.
Hard Reset: Using the stylus press and hold the
Reset
button and then press and release the
Power
button.
This resets RAM, reloads the OS, and resets the Real Time Clock.
Soft Reset (Warm Boot)
A soft reset re-boots the terminal without losing RAM data and launches Autoinstall, which re-initializes the terminal.
You would perform a soft reset 1) when the terminal fails to respond, 2) after installing software applications that require a reboot, or 3) after making changes to certain system settings.
1.
Press the Reset button. The screen turns white and the decode and scan LED flashes blue for approximately three seconds.
2.
When the reset is complete, the Desktop appears.
3 - 15
Hard Reset (Cold Boot)
!
A hard reset erases all of the data and applications stored in RAM memory and launches Autoinstall, which re-initializes the terminal.
Hard resets automatically launch a soft reset as part of the boot process if there are CAB files present.
1.
Press and hold the Reset button and then press and release the Power button. The screen turns white and the decode and scan LED flashes red for approximately three seconds.
2.
The terminal re-initializes, which re-installs all programs stored in the \Honeywell\Autoinstall folder.
Note: Set the time and date after each hard reset to ensure that the system clock is accurate. Double-click the date on the command bar to open the Clock setting and set the time and date.
Suspend Mode
Suspend Mode suspends terminal operation. The terminal appears to be “off” when in Suspend Mode.
The terminal is programmed to go into Suspend Mode automatically when inactive for a specified period of time. You can set this time period in the Power setting.
To suspend and resume operation, press the Power button. You may also press the front Scan key to wake a suspended device unless the battery door has been removed and replaced.
Main Battery Pack on page 3-13.
When you replace the battery door, press the
Power
button to wake the device. Pressing the front Scan key will not wake up the device when the battery door is replaced.
Troubleshooting Suspend/Resume
If the terminal does not wake when you press the Power button, the main battery might be too low to resume operation. To check, remove the battery and install a fully charged battery or connect the terminal to a Dolphin charging peripheral.
Changing the Memory Allocation
You can adjust file storage vs. program memory in System Properties.
1.
Tap Start -> Settings -> Control Panel -> System -> Memory tab.
2.
Move the slider to adjust the memory allocation and tap OK. The changes take effect immediately.
3 - 16
Care and Cleaning of the Dolphin Terminal
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth.
Dolphin 6100 Technical Specifications
Microsoft Windows CE 5.0
Honeywell SDK for Windows® CE 5.0
Operating System
Development
Environment
Application Software
Processor
Memory
Storage Expansion
Display
Image Engine
Keypad
Voice Communication
Audio
I/O
Battery
Honeywell Power Tools and Demos
Marvell PXA 300 624MHz
128MB RAM X 128MB Flash
User accessible Micro SD memory card slot. Please contact your Honeywell sales representative for available qualified card options.
2.8 in. transmissive active matrix 65K color LCD with backlight, QVGA (240 x 320)
5100HD, 5100SF, 5100SR, 5300HD, 5300SF, 5300SR 2D imager engines with laser aimer or IS4813 1D laser engine
28-key shifted alpha numeric with backlit keys
Voice-over-IP and Push-to-Talk ready
Built-in microphone and speaker, stereo headset jack
Full speed USB 1.1 from cradle (or I/O cable); RS232 (115 Kbps) from cradle
Standard Li-ion battery 3.7V / 2200 mAh / 8.1 Wh
Extended Li-ion battery 3.7V / 3300 mAh / 12.2 Wh (includes extended battery door)
8+ hours (with scan and continuously transmitting)*
Expected Hours of
Operation
Charging
Expected Charge Time
Charging Peripherals
WPAN (standard)
5V/3A input through bottom access or USB/Serial connector
Standard Capacity: 2200mAh - four hours
Extended Capacity: 3300mAh - six hours
AC wall adapter and Charger (PSC11R-050)/Communication Cable
HomeBase–single-bay terminal charge/communicate eBase–single-bay terminal charge/communication base (via Ethernet connection)
Quad Charger–four-slot battery pack charger (DSA-0421S-03 1)
Net Base–four-bay terminal charge/communication base (via Ethernet connection)
Bluetooth Class II (10 m) v2.0 Enhanced Data Rate (EDR) with on-board antenna. BQB certified
3 - 17
WLAN (optional)
WLAN Security
Operating Temperature
Charging Temperature
Storage Temperature
Humidity
Construction
Drop
Tumble
ESD
Environmental
Dimensions
Weight
Scanner / Decode
Capabilities
Regulatory and
Compliance
Dual Mode 802.11 b/g (11 Mbps/54 Mbps) with internal antenna
Wi-Fi Certified, 802.1X, WPA2, EAP, WEP, LEAP, TKIP, MSD, EAP-TLS, EAP-TTLS, WPA-
PSK, PEAP, CCXv4
14° to122°F (-10° to 50°C)
32° to 104°F (0° to 40°C)
-4° to 158°F (-20° to 70°C)
95% humidity, non-condensing
High impact resistant PC/ABS housings
Magnesium alloy internal chassis with component shock mounts
4 ft. (1.2m) multiple drops to concrete, all axis, across operating temperature range
500 3.3 ft (1.0m) tumbles (1,000 drops)
Air: ± 15k Vdc
Direct: ± 8k Vdc
Independently certified to meet IP54 standards for moisture and particle resistance
175 mm long x 66 mm wide x 26.8 mm deep (6.8” x 2.60” x 1.06”)
250 g (8.8 oz) including standard battery pack
5100HD, 5100SF, 5100SR, 5300HD, 5300SF, 5300SR 2D Imager with Adaptus
Technology and Laser Aimer. Decodes all standard 1D, 2D, Postal, and OCR codes.
4813 laser engine. Decodes all standard 1D codes.
Safety: UL60950-1, cUL 60950, IEC/EN 60950-1, EN60825-1:1994 + A11 +A2, NOM,
EN60950, CCC, PSE,
EMC: FCC Part 15, Sub part B, ICES-003, RSS 210, EN 55022 (CISPR 22) Class B,
EN55024:1998, EN300 328, EN301 489-1, EN301 489-7, EN301 489-17, IEC 62209-2,
SRRC, AIRB, ANATEL, AS/NZS4268, COFETEL
* For standard battery pack. Battery life varies with application and use case
.
3 - 18
4
Using the Keypad
Numeric Keypad Layout
Navigation keys
Power key
Navigation Keys
Located in the center of the keypad for easy access with either hand, the navigation keys enable you to move the cursor up and down lines and from character to character.
4 - 1
Basic Keys
Control
Escape
Enter
Power
Scan
Space
Name
ALPHA
Backspace
Function
Toggles the keypad between alpha (upper and lowercase) and numeric modes. Indicator changes accordingly on the command bar.
Backspace moves the cursor back one space.
If you are typing text, a character is deleted each time you press the backspace key.
Modifies the next key pressed to type specific characters.
Cancels an action.
Performs the same function as the Enter key on a workstation.
Suspends and resumes the terminal.
Activates the image engine to scan a bar code or take an image.
Moves the cursor one space forward.
If you are typing text, it moves the text one space forward as well.
Alpha/Numeric Modes
The keypad defaults to numeric mode. Use the ALPHA key to toggle between numeric and alpha modes.
Pressing the ALPHA key once locks the keypad in numeric mode, alpha mode (lowercase), or alpha mode (uppercase).
The command bar on the screen displays an icon that indicates the alpha/numeric status of the keypad.
Icon Keypad Status
The keypad is in lowercase alpha mode.
The keypad is in uppercase alpha mode.
The keypad is in numeric mode.
Alpha Indicators on the Number Keys
Each number key displays the characters typed when you press that key in alpha mode.
4 - 2
Note that when typing in alpha mode, you must use the same multi-press method you would use when typing letters on a phone keypad. Each key press types the next letter in the sequence as displayed by the alpha indicator.
Function Key Combinations
The Function key (FUNC) modifies the next key pressed to perform specific functions.
Key Combination
FUNC + 1
FUNC + 2
FUNC + 3
FUNC + 4
FUNC + 5
FUNC + 6
FUNC + 7
FUNC + 8
FUNC + 9
FUNC + .
FUNC + 0
FUNC + SP
Function
F5
F6
F7
Toggle the wireless radio on and off
Increase screen brightness
Increase volume
Tab
Decrease screen brightness
Decrease volume
Start menu
Delete
Align the screen
(Press ESC to exit)
The keypad is color-coded in blue to indicate these key combinations.
Note: The color-coded indicators are located below each key.
4 - 3
CTRL Key Combinations
The Control key (CTRL) modifies the next key pressed to type specific characters.
Key Combination
CTRL + 1
CTRL + 2
CTRL + 3
CTRL + 4
CTRL + 5
CTRL + 6
CTRL + 7
CTRL + 8
CTRL + 9
CTRL + .
CTRL + 0
CTRL + SP
^
&
$
%
!
Function
@
#
(
)
- (minus)
*
+ (plus)
The keypad is color-coded in yellow to indicate these key combinations.
Note: The color-coded indicators are located below each key.
Program Buttons
Buttons can be programmed to execute different functions using the Program Button program in the
Control Panel. The following buttons on the Dolphin 6100 are programmed for the listed function. Press and hold the Function (FUNC) key and press the appropriate function key to execute the indicated function.
F4
F5
F6
F7
Key Combination
F1
F2
F3
Function
WordPad
Windows Explorer
Internet Explorer
Pocket CMD
Control Panel
Transcriber
4 - 4
5
Using the Image Engine
Overview
The Dolphin 6100 houses either a compact image engine using Adaptus
™
Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding or a
IS4813 laser engine that reads all popular 1D bar codes (see Using the Laser Engine on page 6-1
). The image engine can also capture digital images, such as signatures and pictures.
Available Image Engines
The Dolphin 6100 can be equipped with a 5300SR, 5300SF, 5300HD, 5100SR, 5100SF, or 5100HD image engine (depending on the configuration purchased).
Depth of Field
5300 Standard Range (5300SR)
8.3 mil
Linear
10 mil
PDF417
13 mil
UPC
15 mil
Data Matrix
15 mil
QR
35 mil
MaxiCode
(.020cm) (.025cm) (.033cm) (.038cm) (.038cm) (.089cm)
Working
Range*:
Near
Far
3.5 in.
(8.9cm)
7.7 in.
(19.3cm)
3.1 in.
(7.9cm)
9 in.
(22.9cm)
2.1 in.
(5.3cm)
13.2 in.
(33.5cm)
*Data characterized at 23°C and 0 lux ambient light.
5300 Short Focus (5300SF)
2.3 in.
(5.8cm)
10.2 in.
(25.9cm)
3.1 in.
(7.9cm)
8.8 in.
(22.4cm)
2.0 in.
(5.1cm)
13.0 in.
(33cm)
6.6 mil
PDF417
7.5 mil
Linear
8.3 Data
Matrix
8.3 mil QR 10 mil
Linear
13 mil UPC
(.017cm) (.019cm) (.021cm) (.021cm) (.025cm) (.033cm)
Working
Range*:
Near
Far
2.8 in.
(7.1cm)
6 in.
(15.2cm)
2.5 in.
(6.4cm)
6.5 in.
(16.5cm)
3.4 in.
(8.6cm)
5.7 in.
(14.5cm)
*Data characterized at 23°C and 0 lux ambient light.
3.4 in.
(8.6cm)
5.4 in.
(13.7cm)
2.2 in.
(5.6cm)
7.6 in.
(19.3cm)
2.0 in.
(5.1cm)
8.9 in.
(22.6cm)
5 - 1
5300 High Density (5300HD)
5 mil
Linear
NA
6.6 mil
PDF417
NA
8.3 mil Data
Matrix
NA
8.3 mil QR
NA
Working
Range*:
Near
Far
2.4 in.
(6.1cm)
4.3 in.
(10.9cm)
2.1 in.
(5.3cm)
5.0 in.
(12.7cm)
2.6 in.
(6.6cm)
4.6 in.
(11.7cm)
*Data characterized at 23°C and 0 lux ambient light.
5100 Standard Range (5100SR)
2.5 in.
(6.4cm)
4.6 in.
(11.7cm)
15 mil
Linear
13 mil UPC
NA NA
1.6 in.
(4.1cm)
6.9 in.
(17.5cm)
2.1 in.
(5.3cm)
6.7 in.
(17.0cm)
8.3 mil
Linear
10 mil
PDF417
13 mil
UPC
15 mil
Data Matrix
15 mil
QR
35 mil
MaxiCode
(.020cm) (.025cm) (.033cm) (.038cm) (.038cm) (.089cm)
Working
Range*:
Near
Far
3.5 in.
(8.9cm)
7.7 in.
(19.3cm)
3.1 in.
(7.9cm)
9 in.
(22.9cm)
2.1 in.
(5.3cm)
13.2 in.
(33.5cm)
*Data characterized at 23°C and 0 lux ambient light.
5100 Short Focus (5100SF)
2.3 in.
(5.8cm)
10.2 in.
(25.9cm)
3.1 in.
(7.9cm)
8.8 in.
(22.4cm)
2.0 in.
(5.1cm)
13.0 in.
(33cm)
6.6 mil
PDF417
7.5 mil
Linear
8.3 Data
Matrix
8.3 mil QR 10 mil
Linear
13 mil UPC
(.017cm) (.019cm) (.021cm) (.021cm) (.025cm) (.033cm)
Working
Range*:
Near
Far
2.8 in.
(7.1cm)
6 in.
(15.2cm)
2.5 in.
(6.4cm)
6.5 in.
(16.5cm)
3.4 in.
(8.6cm)
5.7 in.
(14.5cm)
*Data characterized at 23°C and 0 lux ambient light.
3.4 in.
(8.6cm)
5.4 in.
(13.7cm)
2.2 in.
(5.6cm)
7.6 in.
(19.3cm)
2.0 in.
(5.1cm)
8.9 in.
(22.6cm)
5 - 2
5100 High Density (5100HD)
5 mil
Linear
NA
6.6 mil
PDF417
NA
8.3 mil Data
Matrix
NA
8.3 mil QR
NA
Working
Range*:
Near
Far
2.4 in.
(6.1cm)
4.3 in.
(10.9cm)
2.1 in.
(5.3cm)
5.0 in.
(12.7cm)
2.6 in.
(6.6cm)
4.6 in.
(11.7cm)
*Data characterized at 23°C and 0 lux ambient light.
2.5 in.
(6.4cm)
4.6 in.
(11.7cm)
15 mil
Linear
13 mil UPC
NA NA
1.6 in.
(4.1cm)
6.9 in.
(17.5cm)
2.1 in.
(5.3cm)
6.7 in.
(17.0cm)
5 - 3
Supported Bar Code Symbologies
Symbology Type
1D Symbologies
Symbology Name
Codabar
Code 3 of 9
Code 11
Code 32 Pharmaceutical (PARAF)
Code 93
Code 128
EAN with Add-On
EAN with Extended Coupon Code
EAN-13
GS1 Databar
Interleaved 2 or 5
Matrix 2 of 5
Plessey
PosiCode
Straight 2 of 5 IATA
Straight 2 of 5 Industrial
Telepen
Trioptic Code
GS1-128
UPC and UPC-A
2D Symbologies
Aztec
Code 16K
Composite
Data Matrix
Grid Matrix
GS1 Databar
Han Xin
MaxiCode
OCR
PDF417
QR Code
Composite Codes
Aztec Mesa
Codablock F
EAN·UCC
GS1 Databar-14
OCR
Postal Codes
OCR-A
OCR-B
OCR-US Money Font
Postnet and most international 4 state codes
Australian Post
British Post
Canadian Post
China Post
Japanese Post
KIX (Netherlands) Post
Korea Post
Planet Code
5 - 4
Activating the Engine
When a scanning application is open, press the Scan key to activate the image engine.
Using Demos
Dolphin Demos are software utilities loaded on all Dolphin terminals that demonstrate the advanced features of the terminal. There are two Demos that feature the image engine: Image Demo and Scan
Demo.
To access these demos, tap Start -> Programs -> Demos.
• Select Scan Demo to verify decoding, or
• Select Image Demo to verify imaging (not available on device using the IS4813 laser engine).
For more information about Demos, refer to the Dolphin Demos User’s Guide, which is available for download from www.honeywellaidc.com
.
Decoding
The Dolphin terminal supports two types of image decoding: full-area imaging and Advanced Linear
Decoding (ALD).
Full-area Imaging
With full-area imaging the Dolphin terminal supports omni-directional aiming meaning that a positive read can be obtained from many positions. For details, see Omni-Directional Scanning
Positions on page 5-4.
ALD
ALD provides fast reading of linear (1D) and stacked linear bar codes (PDF417). For the best read, the aiming pattern should be centered horizontally across the bar code. When ALD is enabled, the reader does not read matrix or postal codes.
To Decode a Bar Code
1.
Tap Start -> Programs -> Demos -> Scan Demo.
2.
Position the Dolphin terminal over one of the sample bar codes on page 5-6 .
A range of 4–10 inches (10–25 cm) from the bar code is recommended.
3.
Project the aiming brackets by pressing and holding the Scan key. The Scan LED lights red
.
4.
Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the
bar code to achieve optimal decoding; Omni-Directional Scanning Positions , page 5-6
5.
When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.
5 - 5
Sample Bar Codes
You can use the following bar codes to verify decoding:
Sample 128 Sample PDF417
Code 128
PDF417 Test Message
Omni-Directional Scanning Positions
The high-vis aiming pattern frames the bar code to provide you with the best scanning performance.
Note: To achieve the best read, the aiming beam should be centered horizontally across the bar code.
The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or elements (mil size) should be read farther from the unit.
Capturing Images (5300 Engine Only)
The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily develop their own technique and, with practice, quickly learn to adapt to different application environments.
Image Preview
When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing and has a slightly degraded appearance compared to the captured image. This is normal; the captured image has a higher resolution.
File Formats
The Dolphin terminal is capable of saving images in a number of industry-standard file formats
(BMP, JPG and PNG). The default file format for images is a grayscale BMP.
File Size
Digital images have a maximum image size of 640 x 480 pixels and may have up to a 256 grayscale image definition. The image quality and related file size are determined by the data compression method used by the software application used to take the image. The average size of the image file is approximately 4–8K. However, the size of the image depends on image content; the more complex the content, the larger the file size.
5 - 6
Taking an Image
1.
Tap Start -> Programs -> Demos -> Image Demo.
2.
Point the Dolphin terminal at the object.
3.
Press the Scan key to activate the engine. The touch screen displays a preview of the object.
4.
Adjust the terminal’s position until the preview on the screen is as you want it to appear in the image.
5.
Hold the terminal still and release the Scan key.
The touch screen flashes, and the captured image appears on the screen.
6.
By default, the image is saved to the My Documents folder in My Device.
To save the image to another location, tap File -> Save As.
High-Vis Aiming Pattern
If your Dolphin terminal is configured with the 5300SR imager, you can enable the aiming pattern for imaging in the Image Demo application.
1.
Tap Start -> Programs -> Demos -> Imaging Demo -> Setup menu -> Aimer.
2.
The aiming pattern is now enabled for imaging.
Uploading Images
Image files can be transmitted to a host workstation via the following methods. Refer to the
chapters.
• Microsoft ActiveSync and a Dolphin communication peripheral
• Wireless radio: 802.11b/g and/or Bluetooth
5 - 7
5 - 8
6
Using the Laser Engine
Overview
The Dolphin 6100 (IS4813 laser version) contains a laser diode that emits a beam toward an oscillating mirror that scans through the code and the reflected light is bounced off of two mirrors back to the collector. The 6100 laser version reads all popular 1D bar codes.
Available Laser Engines
The Dolphin 6100 can be equipped with an IS4813 laser engine (depending on the configuration purchased).
Depth of Field - IS4813
5.2 mil 7.5 mil 10.4 mil 13.0 mil 19.5 mil
(25mm) (114mm) (160mm) (204mm) (225mm)
Working
Range*:
Near
Far
2.75 in.
(70mm)
3.75 in.
(95mm)
2.25 in.
(57mm)
6.75 in.
(171mm)
2.00 in.
(50mm)
8.25 in.
(210mm)
2.00in.
(50mm)
10.00 in.
(254mm)
2.95 in.
(75mm)
11.81 in.
(300mm)
*Data characterized at 25°C under typical indoor lighting.
Supported Bar Code Symbologies
Symbology Type
1D Symbologies
Symbology Name
China Post
Codabar
Codablock F
Code 3 of 9
Code 11
Code 16
Code 32 Pharmaceutical (PARAF)
Code 49
Code 93/93i
Code 128
EAN-8
EAN-13
GS1 Composite
GS1 Databar
GS1 Databar Interim Coupon Bar
Code
GS1-128
ISBT 128
Interleaved 2 or 5
Korea Post
Label Code
Matrix 2 of 5
MSI
Plessey
PosiCode
Straight 2 of 5 IATA
Straight 2 of 5 Industrial
TCIF Linked Code 39 (TLC39)
Telepen
Trioptic Code
UPC, UPC-A, UPC-E
6 - 1
Activating the Engine
When a scanning application is open, press the Scan key to activate the laser engine.
Using Demos
Dolphin Demos are software utilities loaded on Dolphin terminals that demonstrate the advanced features of the terminal.
To access these demos, tap Start > Programs > Demos.
• Select Scan Demo to verify decoding
Decoding a Bar Code
1.
Tap Start > Demos > Scan Demo.
2.
Position the Dolphin terminal over one of the sample bar codes on page 6-2 .
A range of 4-10 inches (10-25 cm) from the bar code is recommended.
3.
Project the aiming beam by pressing and holding the Scan key. The Scan LED lights red
.
4.
Center the aimer beam horizontally over the bar code and highlight all of the vertical bars of the bar code. The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or elements (mil size) should be read farther from the unit .
5.
When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.
Sample Bar Code
You can use the following bar code to verify decoding:
Sample 128
Scanning Positions
The aiming beam must be aimed across the entire bar code to provide you with the best scanning performance. The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or elements (mil size) should be read farther from the unit.
6 - 2
7
Communication
Communication Options
Dolphin terminals offer several communication options including Microsoft ActiveSync and wireless radios.
I/O Connector (Wired Communication)
The mechanical connector on the bottom panel (see DC Power Jack on page 3-11) connects
the terminal to various Dolphin communication peripherals that connect to a host workstation via USB (1.1 or higher), thus enabling ActiveSync communication.
For more information, see ActiveSync Communication on page 7-2.
Wireless Radios (Wireless Communication)
Dolphin 6100s can be equipped with an 802.11b/g and Bluetooth radio or a combination of these radios.
For more information, see Wireless Radios on page 7-6.
Installing Additional Software
Dolphin terminals ship with the operating system, radio drivers, and custom Honeywell software already installed. These are the default programs that install when your terminal first boots up. You can install additional software programs on the terminal provided that the following parameters are met:
• the software program was created for a Windows CE device.
• the terminal has enough memory to store and run the program.
• the program has an EXE, CAB, or DLL extension.
When selecting programs, verify that the program and version of the program are designed for the
Windows CE 5.0 and the terminal’s processor. You can verify your processor by tapping Start -> Settings
-> Control Panel -> System -> General tab. Make a note of the information in the Processor field.
To install additional software, you can use the communication options described in this chapter.
•
Adding Programs via ActiveSync (page 7-5).
•
Adding Programs from the Internet (page 7-7).
7 - 1
Connecting the USB Charging/Communication Cable
To facilitate USB communication between the Dolphin terminal and the host workstation, you may connect your unit to a host by using either the optional Dolphin 6100-USB Communication Cable or
HomeBase. If you use the Communication Cable, slide the cable unit onto the bottom of the terminal lining up the terminal’s I/O connector with the cable unit’s connector.
Host
Workstation
USB Cable
Power Cable
USB
Connector
ActiveSync Communication
To synchronize, ActiveSync 4.1 or higher must be installed and configured for the appropriate communication type on the host workstation and the Dolphin terminal. Dolphin terminals ship with
ActiveSync already installed. Therefore, if ActiveSync is already installed on the host workstation, you just need to connect the Dolphin terminal to the host workstation (via Dolphin peripheral) to initiate communication.
Note: You can download the most current version of ActiveSync from www.microsoft.com
.
!
When communicating via ActiveSync, your terminal is designed to be connected to the host workstation with a Honeywell communication peripheral. We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
Communication Type
The Dolphin 6100 supports the following type of communication via ActiveSync through its DC Power
Jack (see page 3-11) on the bottom panel:
USB
The USB cable and hardware peripherals allow the Dolphin terminal to communicate with a workstation through a USB port or to a network through a USB hub. The Dolphin terminal supports full-speed USB communication (USB 1.1); maximum data transfer rate is 12
Mbps. The Dolphin terminal defaults to USB communication out of the box.
7 - 2
Hardware Requirements for Setup
• Dolphin communication peripheral
• Dolphin power cable
• USB Cable (for USB communication)
• ActiveSync v4.1 or higher installed on the host workstation
• Windows 98 Second Edition, Windows Me, Windows 2000, Windows NT (4.0 SP6 or higher) or
Windows XP computer.
Software Requirements for Communication
To sync successfully, ActiveSync must be configured for the same communication type on both the host workstation and the Dolphin terminal. ActiveSync must be setup on your workstation before you initiate synchronization from the terminal for the first time.
Setting Up the Host Workstation
Verify that ActiveSync is configured to use the appropriate communication type by selecting File ->
Connection Settings.
For USB communication, check Allow USB connections.
Setting Up the Dolphin Terminal
The Dolphin terminal defaults to USB communication out of the box. To verify and/or change the default setting, tap Start -> Settings -> Control Panel -> PC Connection.
Must be checked to connect to a workstation
Displays the current connection setting
Tap to change the connection settings
7 - 3
Tap Change Connection to change the current settings.
Connection Options Select this option to …
‘USB
Establish a USB connection.
Communicating with the Dolphin Terminal
After setting up both the workstation and the terminal, ActiveSync connection should be automatic.
1.
Connect the Dolphin terminal to a communication peripheral, such as the Dolphin HomeBase.
2.
The Dolphin terminal automatically opens ActiveSync to establish a connection.
Synchronizing with the Host Workstation
After setup, synchronization begins automatically whenever the terminal’s mechanical connector connects to a Dolphin peripheral that is connected to a host workstation with ActiveSync installed.
Exploring the Terminal from the Workstation
When the terminal and desktop computer are connected, open the main ActiveSync window (on the desktop), and click Explore.
7 - 4
The Mobile Device folder opens in Windows Explorer.
The Dolphin terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting as you would for moving files between folders on your hard drive.
Adding Programs via ActiveSync
!
When selecting programs, verify that the program and version of the program are designed for the Windows
CE 5.0 and the terminal’s processor. You can verify your processor by tapping Start -> Settings -> Control
Panel -> System -> General tab. Make a note of the information in the Processor field.
Generally, software for Windows CE devices must be installed to the host workstation first, then transferred to the Dolphin terminal.
1.
Download the program to the workstation from either the Internet or the install CD. You may see a single *.exe or setup.exe file, a *.cab file, or *.dll. (There may also be several versions of files for different device types and processors.)
2.
Read any installation instructions, Read Me files, or documentation that comes with the program.
Many programs provide special installation instructions.
3.
Connect the terminal to the workstation via a Dolphin communication peripheral.
If the File is an Installer
An installer program is one that installs to the workstation and the terminal simultaneously; one process installs to both devices.
1.
On the workstation, double-click the *.exe or *.setup.exe file. The installation wizard begins.
2.
Follow the directions on the workstation screen.
The installation process includes transferring the software to the terminal via ActiveSync.
7 - 5
If the File is Not an Installer
Some programs cannot be installed on workstations because they are designed exclusively for Windows
CE devices. In these cases, the appropriate files must be stored on the host workstation and transferred to the terminal via ActiveSync Explore.
Note: If an error message stating that the program is valid but designed for a different type of computer appears when you try to install the program on the workstation, the program is not an installer.
1.
If you cannot find any installation instructions for the program in the Read Me file or documentation, open ActiveSync on the workstation and click Explore.
2.
On the workstation, navigate to the workstation folder containing the program file(s) and copy them to the Program Files folder on the terminal.
If you want the program to persist through hard resets, save the program to the Autoinstall folder
(
\Honeywell\AutoInstall
).
3.
On the terminal Desktop, tap My Device and, in Windows Explorer, navigate to the folder where the program is located.
4.
Double tap on the program file to install it.
If you copied the file to the Autoinstall folder, you can choose to install the program by performing a hard reset. The program installs as part of initialization.
5.
After installation is complete, access the program by tapping Start -> Programs, and the program appears on the Programs screen. Tap the icon to open the program.
Wireless Radios
There are two radio options: 802.11b/g and Bluetooth.
1.
802.11b/g (WPAN/WLAN configuration): see
WLAN (802.11b/g Radio) , below.
2.
Bluetooth (WPAN configuration): see Bluetooth Handler on page 8-1.
Connecting the Terminal to a Wireless Network
You connect the terminal to a wireless network through the on-board radio (802.11b/g and/or Bluetooth).
Each radio has its own configuration program and requires specific information about the wireless network to connect. Successful connection depends on your network infrastructure about which you will need specific information from your network administrator.
WLAN (802.11b/g Radio)
Dolphin 6100s can have a 2.4 GHz 802.11b/g WLAN (Wireless Local Area Network) radio that uses Direct
Sequence Spread Spectrum (DSSS) technology. The radio is interoperable with other 802.11b/g, Wi-Ficompliant products including access points (APs), workstations via PC card adapters, and other wireless portable devices.
By default, the 802.11b/g radio is powered-off (i.e., disabled) “out of the box” To power it on (i.e., enable), press the vertical arrow (bottom right corner of screen) and select Turn Wireless LAN On. The enable/ disable state of the radio will survive subsequent soft and hard resets. The next step is to configure the connection parameters of the radio to connect to a wireless network.
Configuring the WLAN Radio
The WLAN radio is configured in the Honeywell WLAN Security Supplicant, which you access by double tapping the program icon in the command bar.
7 - 6
For complete configuration instructions, download the Honeywell Secure Wireless (SWC) Client User’s
Guide from www.honeywellaidc.com
. A link to this guide appears on the Dolphin 6100 product page.
Adding Programs from the Internet
When you have established a network connection (whether via Wireless LAN, Bluetooth, or ActiveSync), you can access the Internet and download additional software programs.
When selecting programs, verify that the program and version of the program are designed for Windows CE 5.0 and the terminal’s processor. You can verify your processor by tapping Start -> Settings -> Control Panel -> System ->
General tab. Make a note of the information in the Processor field.
1.
Open Internet Explorer and navigate to the program’s location. You may see a single *.exe or setup.exe file, or several versions of files for different device types and processors.
2.
Select the program version that matches your Dolphin terminal and processor.
3.
Read any installation instructions, Read Me files, or documentation that comes with the program.
Many programs provide special installation instructions.
4.
Download the program to the terminal directly from the Internet.
You would normally store the program in the
\Program Files
folder unless another location is required by the program.
5.
On the terminal, double tap the installer file; e.g., the *.exe file.
6.
The installation wizard for the program begins.
7.
Follow the directions on the screen to complete installation.
7 - 7
7 - 8
8
Bluetooth Handler
Bluetooth wireless technology is a short-range communications technology to connect portable and/or fixed devices while maintaining high levels of security.
Enabling the Bluetooth Radio
1.
Select the device panel indicated by the UP arrow in the lower, right portion of the display.
2.
Tap Turn Bluetooth On.
The Bluetooth icon appears in the task bar.
Connecting to Other Devices
Before connecting to another device, make sure that the Bluetooth connection on the other device is enabled.
1.
Double tap on the Bluetooth icon in the task bar.
The Bluetooth Handler appears on the screen.
2.
Tap Scan Device.
The available services of all devices / profiles in range display in the Bluetooth Handler.
Pairing Bluetooth Devices
Connecting Bluetooth devices usually requires that they be paired; the same passkey must be entered for each device. If you want to connect the Dolphin 6100 to a device without any input method (e.g., printers, headsets), refer to the user documentation that accompanied the device for pairing information.
1.
Tap on the desired device / profile in the Bluetooth Handler.
2.
Select Trusted from the drop down menu.
Once asked if you need to authenticate the device,
3.
Tap on the Yes button.
4.
Enter 4 random digits and tap Yes.
5.
Enter the same digits on the other device when prompted.
6.
After pairing, double tap on the selected device / profile and select Active.
Setting Up a Bluetooth Printer
1.
Make sure that the Bluetooth printer is on and activated.
2.
If not done so already, turn Bluetooth On (by selecting the vertical arrow on the Command Bar).
3.
Tap Serial tab.
4.
Tap Scan Device, which runs a Bluetooth Inquiry, then SDP Query.
5.
If you see your Bluetooth printer device displayed, you can tap Cancel to stop the search.
8 - 1
OR
Wait until all Bluetooth devices in range have been scanned and the Scan Dialog window appears.
6.
Scroll through the list until your Bluetooth printer device is found. You may single tap any device in the list to display its MAC address.
7.
Highlight the Bluetooth printer device and tap the Select button.
8.
When the COM port selection appears, select COM7 and tap OK.
9.
If successful, the COM port and MAC address of the device appears under the list of Registered
Bluetooth Virtual COM ports.
10. Tap OK to exit the Bluetooth Handler.
11. One of the ways to test the connection to the printer is to follow the steps below: a. Select Start -> Programs -> Demos -> Print Demo.
b. Tap Zebra (BT) Barcodes Print.
c. If the connection is successful, the bar code prints.
Setting Up a Connection to a Mobile Phone
You can use a GSM mobile phone as a modem to connect to the Internet using GPRS (General Packet
Radio Service) data connection.
Prior to connecting the Dolphin 6100 to a mobile phone, contact your mobile phone service provider about the GPRS configuration, coverage, and fees. Also consult the user documentation for your mobile phone to determine if your phone supports GPRS data transfer and if it has an available Bluetooth connection.
If your phone supports 3G data transfer, you should be able to connect the Dolphin 6100 to your phone.
1.
Determine if your phone is configured and connected to GPRS.
2.
Activate your mobile phone’s Bluetooth feature.
3.
Select Start - Settings - Network and Dial-up Connections.
4.
Double tap on Make New Connections.
5.
Choose Dial-up Connection and select Next.
6.
Select Bluetooth.
7.
Select and activate the data modem service for your phone (refer to
8.
Select the data modem service from step 7 from the Select a Modem: drop down menu.
9.
Enter a dial-up phone number. (Contact you mobile network services provider for additional information about connecting the Internet using your mobile phone.)
10. Tap Finish.
8 - 2
9
Dolphin HomeBase/eBase Device
Overview
Note: The information in this chapter applies to both the Dolphin HomeBase and Dolphin eBase devices unless otherwise indicated.
As the hub of your Dolphin 6100 system, the Dolphin HomeBase charging and communication cradle supports full-speed USB 1.1 and RS-232 communication with a workstation. The Dolphin eBase is identical to the Dolphin HomeBase except it supports Ethernet communication as well as USB 1.1 and
RS-232.
Battery Charging
The base completes a full charge of the main battery pack in four hours for the standard capacity
2200mAh pack and six hours for the extended capacity 3300mAh pack.
In addition to charging, the base powers the terminal’s intelligent battery charging system, which protects the battery from being damaged by overcharging. The terminal senses when a battery pack is fully charged and automatically turns off the charger. If the battery voltage drops below the charge threshold, the charger turns on again to maintain the battery at full capacity. As a result, Dolphin terminals may be stored in the base indefinitely without damage to the terminals, battery packs, or peripherals. For prolonged storage, see
Storage Guidelines on page 3-14. The base can also charge a second battery
while the terminal is positioned in the base. See Charging a Spare Battery on page 9-6.
Power Supply
The power cable that ships with each terminal also powers the base.
!
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
!
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. DO NOT attempt to charge damp/wet mobile computers or batteries.
All components must be dry before connecting to an external power source.
9 - 1
Front Panel
Terminal Well
Charging LED
Terminal Well
Place the Dolphin terminal in the terminal well to communicate with a host device, power the terminal, and charge the terminal’s battery. Make sure that the device is securely seated.
Rubber Feet
The bottom panel has four rubber feet to stabilize the unit on a flat surface. You can set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet.
Back Panel
HomeBase eBase
Serial Port
USB Port
Serial Port
Ethernet Port
USB Port
DC Power Jack
DC Power Jack
Connect the power cable to this power jack; see Powering the Dolphin HomeBase Device on page 9-3.
9 - 2
USB Port
The USB port is full-speed (v1.1). Using the USB cable, you can connect the base to a USBcompliant device to facilitate USB communication to and from the terminal. USB communication occurs through Microsoft ActiveSync (v.4.1 or higher). For more information
about ActiveSync setup, see ActiveSync Communication on page 7-2.
Serial Port
The serial port supports serial communication between the terminal and another device. Note that the connector is a DB9 Male connector, requiring a female connector on the serial cable.
The following four signals are supported:
• Transmitted Data
• Received Data
• Request to Send
• Clear to Send
Note: ActiveSync is not supported over the serial port.
Ethernet Port (eBase only)
Using an Ethernet cable, you can connect the eBase to an Ethernet-compliant device to facilitate Ethernet communication to and from the terminal. This equipment is for indoor use only. The communication wiring is limited to the inside of a building.
Powering the Dolphin HomeBase Device
The terminal requires 5 volts DC input for communication and battery charging; the power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from
Honeywell convert the voltage appropriately.
The same power cable that ships with each terminal can be used to power the base. This cable contains a plug adapter for each geography (US, UK, EU, etc.).
Plug Adapter
Power Adapter
Power Cable
1.
Attach the appropriate plug adapter to the power adapter.
2.
Plug the power cable into the power source.
3.
Plug the connector into the DC power jack on the back panel. The base is now powered.
When a terminal is properly seated, the base powers the terminal, charges the terminal’s main battery
pack, and launches ActiveSync (see ActiveSync Communication on page 7-2) .
Honeywell recommends that you leave the base connected to its power source at all times, so that it is always ready to use.
9 - 3
eBase Clamp-on Ferrite Core Installation
We recommend that you install the clamp-on ferrite core included with your Dolphin eBase on your
Ethernet cable. Installation of the ferrite is required to meet the declared FCC emission levels.
The following illustration shows how to install the ferrite on the cable. It should be placed approximately
1.57 inches (40mm) from the RJ45 plug. The cable should be looped around the core, as shown.
9 - 4
Charging the Main Battery
The base powers the terminal and fully charges its main battery pack in 4 or 6 hours depending on the battery.
As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries.
The process monitors changes in temperature, current, and voltage.
Inserting a Terminal
1.
Install the battery pack in the terminal; see Install the Main Battery on page 2-1.
2.
Power the base; see Powering the Dolphin HomeBase Device on page 9-3.
3.
Slide the terminal into the terminal well making certain that the terminal is seated properly.
4.
The battery pack begins charging.
!
Ensure all components are dry prior to mating terminals/ batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.
9 - 5
Charging a Spare Battery
The base can also charge a second battery while the terminal is positioned in the base. The second battery can be inserted in the battery charging well in back of the terminal connection. Angle the battery as shown. Once the connectors engage, the LED lights. If the LED is red, the unit is charging; if it is green, the charge is complete.
Charging LED
Checking Battery Power
To check battery power while the terminal is operating, tap Start -> Settings -> Control Panel -> double tap Power.
9 - 6
Technical Specifications
Structural
Dimensions
Weight
Material
Color
5.3 in. high X 4.5 in. wide X 3.1 in. deep (13.5 cm. X 11.4 cm. X 7.9 cm.)
Dolphin HomeBase - 11.0 oz. (313g)
Dolphin eBase - 11.3 oz (320g)
Polycarbonate
Black
Environmental
Operating Temperature
Storage Temperature
Charging Temperature
Humidity
Power Supply
14° to 122°F (-10° to 50°C)
-4° to 158°F (-20° to +70°C)
32° to 104°F (0° to 40°C)
Electrical Static Discharge
Air: ± 15k Vdc
Direct: ± 8k Vdc
90% relative humidity (non-condensing)
Input (Universal)
(from the power source)
100–240 Volts, 0.3 A
50–60Hz
Included with Dolphin terminal
5 Volts DC, 2.0 A Output (to the base)
Charging
Standard Charge
Max Charging Current
Standby Current
Status LED
Standard Capacity:
2200mAh - four hours
Extended Capacity: 3300mAh - six hours
2A Max
<100mA
Green: charged
Red: charging
Communication
Interface
USB Mini-B Male connector supports data transmission of up to12 Mbps
OR
Standard DB9 serial connector supports data transmission up to 115 Kbps
Agency Approvals
Power Supply:
Charging:
Fire Retardant:
UL listed
TUV licensed
Power Supply compliant to FCC part 15, Class B
CE Marking (EMC)
CISPR Pub 22
UL 94-VO
9 - 7
9 - 8
10
Dolphin 6100 Net Base Device
Overview
The Net Base enables up to four Dolphin 6100 mobile computers to communicate with a host device over an Ethernet network. In addition, the Net Base provides a second RJ45 Ethernet port for connection to an additional device such as a printer, workstation, eBase, or another Net Base.
!
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
Unpacking the Net Base
Open the shipping box and inspect the package to see that the following standard items are included:
• One Dolphin Net Base Ethernet cradle
• One universal AC/DC power adapter for the Dolphin Net Base
• One power cord
You will also need to provide a standard CAT-5 Ethernet network cable. These items are needed to set up and operate the Net Base. If any items are missing or anything appears to be damaged, contact your
Customer Account Representative.
Keep the original packaging in case you need to return the Net Base for service or to store the Net Base while not in use.
Charge Time
The base supplies power to the intelligent battery charging system in all Dolphin terminals, which senses when a full charge has been achieved and switches to a trickle charge to maintain the full charge.
As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-ion batteries. The process monitors changes in temperature, current, and voltage.
The main battery of each terminal charges in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery.
Convenient Storage
Intelligent battery charging makes this base a safe and convenient storage receptacle for your Dolphin terminal.
Capacity
!!
!!
The base can hold up to 4 Dolphin terminals. Each charging well charges each terminal independently of the other wells.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
10 - 1
Parts and Functions
Front Panel
Terminal Wells
Power/Dock LED
COMM LED
Terminal Wells
The Net Base contains four terminal wells. Each well has its own dedicated Power/Dock LED and COMM LED indicator.
Place the Dolphin terminal in any one of the four wells to communicate with a host device, power the terminal, and charge the installed battery pack. The Net Base completely charges the main battery in a Dolphin terminal in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7 battery.
Power/DOCK LED
Indicates if power is supplied to the Net Base and if a terminal is docked properly in the terminal well. Each terminal well has its own dedicated Dock LED.
This color
Red
Green
means…
The Net Base has power but no terminal is docked.
The Net Base has power and the terminal is properly seated in the base.
COMM LED
The COMM LED indicates the status of connection and data transfer between the Dolphin terminal and the Net Base. Each terminal well has its own dedicated COMM LED.
When the Dolphin terminal is docked:
This color and status means…
Green Solid
Green Flashing
A connection has been established between the Dolphin terminal and the Net Base.
Data transfer in progress.
Note: The COMM LED does not necessarily indicate the Net Base and terminal are connected to a valid Ethernet
link. For more information, see RJ45 Ethernet Ports on page 10-3.
10 - 2
Back Panel
Green LED
Yellow LED
Two RJ45 Ethernet Ports
DC Power Jack
DC Power Jack
Use the power cable from Honeywell that comes with the Net Base to supply power to this
power jack. For more information, see Power on page 10-4.
RJ45 Ethernet Ports
The Net Base contains two RJ45 Ethernet ports. You can connect the Net Base to an Ethernetcompliant device to facilitate Ethernet communication to and from the terminal by plugging a standard CAT-5 Ethernet cable into one of the two Ethernet ports provided. The second RJ45
Ethernet port can be used for connection to an additional device such as a printer, workstation, eBase, or another Net Base.
Note: The Net Base does not use a Spanning Tree Protocol (STP). When both RJ45 Ethernet ports are used, do not connect both Net Base interfaces to the same layer 2 LAN.
Each Ethernet port has a dedicated green and yellow status LED.
This color
Green
Yellow
and status
Flashing
Solid
Solid
Off
means…
Data transfer is in progress.
A connection has been established between the Net Base and the Ethernet.
Ethernet is connected at 100T.
Ethernet is connected at 10T.
Note: The terminal and Ethernet link must be set up properly to allow the terminal to communicate to other devices
10 - 3
Bottom Panel
For details on how to mount the Net Base, see Mounting the Net Base on page 10-6.
Serial Number and Compliance
Label
MAC Address Label
Power
The terminal requires 12 Volts DC input for communications and battery charging; the power adapter on the power cable converts the voltage from the power source to 12 volts DC. Only the Honeywell 12V/
8.5A power supply provided with the Net Base converts the voltage appropriately. The operating temperature range is -10° to 50°C (14° to 122°F).
Honeywell recommends that you leave the Net Base connected to its power source at all times, so that it is always ready to use.
!
!
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
Connecting Power to the Net Base
A/C Power Cord
LED
Power
Adapter
Power Connector Cable
1.
Plug the A/C power cord into the power adapter.
2.
Plug the power connector cable into the power connector on the back of the Net Base.
3.
Plug the A/C power cord into a standard wall outlet. The LED on the Power Adapter illuminates to indicate power.
4.
All four Power/Dock LEDs illuminate solid red to indicate the base has power. Terminal wells with properly docked Dolphins indicate power with a green LED.
5.
The base is ready to begin charging terminals.
10 - 4
Charging the Main Battery
The base provides power to the Dolphin terminals and allows the charging of the main batteries in the terminals. The main battery of each terminal charges in 4 hours for the standard 3.7V battery or
6 hours for the extended 3.7V battery. The intelligent battery charging system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be stored in the base indefinitely without damage to the terminals, battery packs, or the base.
To Power a Terminal and Charge its Main Battery
1.
Install the main battery pack in the terminal; see Install the Main Battery on page 2-1.
2.
3.
Slide the Dolphin terminal into one of the four terminal wells. The the Power/Dock LED for the well changes to green. Charging begins immediately if required by the Dolphin terminal.
!
!
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.
!!
Ensure all components are dry prior to mating batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.
Communication
Software Requirements
Before you connect the Dolphin terminal to the Net Base, make sure you have the most current software installed. To check the terminal’s system information, tap > Power Tools > SysInfo.
• The Kernel version must be 28.04 or later in terminals running Windows Embedded Handheld 6.5
Classic.
• In terminals running Windows CE 5.0, the kernel version must be 23.08 Service Pack 8 or later.
Applications on the Dolphin Terminal
Applications running on the Dolphin terminal when it is connected to the Net Base should be designed specifically for a partially connected network. For more details, please refer to the Best Practices for Partially Connected Networks document available at www.honeywellaidc.com.
Connecting the Dolphin Terminal to the Net Base
By default, the Dolphin terminal is configured to obtain IP addresses automatically using a DHCP server.
This means that in most cases, you would simply plug-and-play the unit.
10 - 5
1.
2.
Plug the CAT-5 Ethernet cable into one of the RJ45 connectors on the back of the Net Base.
3.
Plug the Ethernet cable into the network.
4.
Insert the Dolphin into one of the terminal wells. The DOCK LED for the well changes from red to green and the connection icon on the Dolphin’s title bar changes from x
to .
5.
By default, the DHCP server assigns a unique IP address to each of the Dolphin terminals docked in the Net Base. This IP address can be used by any application on the Dolphin terminal.
Note: Instead of using the default for DHCP assigned IP addresses, the Dolphin terminal can use a statically assigned IP address. See standard Microsoft Windows Mobile documentation for how to assign a static IP address to a network adapter. In this case, set a static IP address for the adapter named "SMC95001 USB2.0
FAST Ethernet Drive".
Displaying the Net Base Terminal Well and Dolphin IP Address
Once the Dolphin terminal establishes communication, it uses the unique IP address assigned to the terminal well it is docked in on the Net Base. If four Dolphin terminals are successfully connected, then four different IP addresses are assigned to the adapter associated with the Dolphin terminal.
1.
Tap > Power Tools > Network Utilities > IPConfig.
2.
Change the Adapter to SMC95001.
3.
On the Input tab, tap the Display full configuration button.
4.
The Dolphin terminal retrieves and displays the IP configuration for the entire Dolphin terminal and the Net Base terminal well where the Dolphin is docked.
5.
Locate the IpAddress
field in the IP configuration list.
Mounting the Net Base
Set the Net Base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the Net Base. When choosing a location, bear in mind that the mounting location must allow users easy access to the terminal wells, the Ethernet ports, and the power jack.
10 - 6
Bottom Panel
DIN Rail Slot Rubber Feet, Qty. 6
Desk Mounting
The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface.
Hardware Required
• 3/16 in. dia x 5/8 in. long pan head screw
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick
• 3/16 in. dia nut
Installing the DIN Rail
1.
Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base.
2.
Turn the base and DIN Rail right side up.
10 - 7
3.
Then, using the appropriate nuts and bolts, secure the DIN Rail to a stable, flat horizontal surface.
DIN Rail (7.5 X 35 mm)
Wall Mounting
The optional wall mount bracket enables secure mounting of the base on a vertical surface. The wall mount bracket can be used in conjunction with the DIN rail but does not require the DIN Rail for use.
Hardware (Provided)
• M3 x 9 mm self-tapping screws, #2 Phillips, Qty. 4
• 3/8 in. x 4 in. round head toggle bolt, 2-5/8 in. usable length, Qty. 4
• 3/8 in. x 2 1/2 in. length Hex Head Lag Screw, Qty. 4
Tools Required
• Drill
• 7/8 in. Drill Bit (for hollow wall installations) or
1/4 in. Drill Bit (for wood stud installation)
• Phillips Screw Driver
Hollow Wall Installation
1.
Drill four pilot holes in the wall using a 7/8 in. drill bit.
13.78 in.
[ 35 cm ]
Wall Mount Bracket
6.5 in.
[16.5 cm]
Wall Mount Holes
10 - 8
2.
Slide the bolt through the wall bracket, and thread the toggle nut onto the bolt.
3.
Press the ends of the toggle nut together, and insert the bolt/nut into the pilot hole until the nut clears inside wall surface. The toggle nut should spring open preventing the screw from being removed.
4.
Repeat steps 2 and 3 for each of the remaining mounting holes.
Bolt
Bracket
Toggle Nut
Wall
5.
Tighten all four bolts to secure the bracket to the wall.
6.
Once the bracket is installed, secure the base to the wall bracket, see
Securing the Base to the Wall Bracket for detailed instructions.
Wall
Open
Toggle Nut
Wood Stud Installation
1.
Drill four pilot holes in the wall/wood stud using the 1/4 in. drill bit.
Bracket
2.
Secure the bracket to the wall using the four Hex Head Lag Screws provided.
3.
Once the bracket is installed, secure the base to the wall bracket, Securing the Base to the Wall
Bracket for detailed instructions.
Securing the Base to the Wall Bracket
You can secure the base to the wall bracket using the optional DIN rail.
Hardware Required
• DIN Rail, Qty. 1
• 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 2
• 3/16 in. dia nut, Qty. 2
1.
Position the DIN Rail on the wall bracket, as shown below.
2.
Slide the screw through the slot on the DIN Rail and the mounting hole in the bracket.
10 - 9
3.
Slide the washer onto the screw and tighten the nut to secure the assembly.
Wall Bracket, Qty. 1
Screw, Qty. 2
Washer, Qty. 1
Nut, Qty. 1
DIN Rail, Qty. 1
Washer, Qty. 1
Nut, Qty. 1
4.
Remove the rubber feet on the bottom of the Net Base.
5.
Slide the base onto the DIN Rail using the slot on the bottom of the base.
Wall Bracket
Wall Bracket
DIN Rail
10 - 10
11
Dolphin QuadCharger Device
Overview
The Dolphin QuadCharger device is a four-slot charging station that charges up to four Li-ion battery packs—both standard capacity 2200mAh and extended capacity 3300mAh—in four hours and six hours
respectively. For more details about charging, see Battery Charging on page 11-2.
!
!
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.
!!
Ensure all components are dry prior to mating batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.
QuadCharger Device
Charging Slots
Power Supply Connector
Status LEDs
Charging Slots
The charger contains four charging slots. Each slot holds one battery. When a battery is placed in a slot, it immediately begins charging and its Status LED lights.
Status LEDs
A status LED is located at the end of each of the four battery slots. The color of the LED indicates the charge status of the battery in the slot.
Green
Red
The battery has completed its charge cycle and is ready for use.
The battery is charging.
11 - 1
Power Supply Connector
Use this connector to attach the power supply to the charger. The universal power supply accepts input voltages between 90–265 volts.
Battery Charging
Charging Process
This charger charges Dolphin 6100 standard capacity Li-ion 2200mAh battery packs in four hours and extended capacity 3300mAh packs in six hours. Each charging slot works independently of the other three. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage.
Temperature
The four and six-hour charge time applies when batteries are charged within the recommended temperature range of 50° to 95° F (10
° to 35°C). Temperature has a significant effect on charging. For best results, battery packs should be at room temperature before inserting in the charger.
!
When the battery temperature exceeds 40
°C, the charger may exceed the stated four or six-hour charge time. The charger stops charging if the battery temperature is greater than 40
°C, but will begin charging again when the battery temperature is less than 40
°C.
Charging Batteries
1.
Supply the charger with power.
2.
Insert batteries into the appropriate slots.
The Status LED for each slot turns red to indicate that the battery is properly seated and has begun a charge cycle.
11 - 2
3.
When the Status LED turns green, the battery in the slot has completed charging.
Recommendations for Storing Batteries
To maintain top performance from batteries, follow these storage guidelines:
• Avoid storing batteries outside of the specified temperature range of -4 to 104° F (-20 to 40°C) or in extremely high humidity.
• For prolonged storage, it is recommended that the battery be at a 40% - 50% charge level, be removed from the device, and stored in a controlled temperature environment. Following these recommendations will maximize battery life.
Troubleshooting
If you encounter problems with the charger, refer to chart below for possible solutions. If problems persist, contact
Technical Assistance (see page 12-2).
Problem
The Status LED does not come on when I insert a battery pack into a slot.
Issue
Check the power connections to the device; make sure the battery pack is properly seated.
11 - 3
Technical Specifications
Structural
Dimensions
7.3 in. long X 3.7 in. wide X 2.4 in. high
(18.5 cm. X 9.4 cm. X 6.1 cm.)
11.5 oz. (325g)
Weight
Material
Case: Polycarbonate
Color: Black
Supports up to four Li-ion battery packs
Capacity
Environmental
Operating Temperature
14° to 122°F (-10° to 50°C)
Storage Temperature
-4° to +158°F (-20° to +70°C)
Charging Temperature
Electrical Static
Discharge
Humidity
32° to 104°F (0° to 40°C)
Air: ± 15k Vdc
Direct: ± 8k Vdc
90% relative humidity (non-condensing)
Power Supply
Input (Universal)
100V-240V, 1.2 A
50-60Hz
Included
5Volts DC, 4.0 A
Output
Charging
Standard Charge
Standard Capacity
2200mAh - four hours
Extended Capacity
3300mAh - six hours
Status LEDs
Green: charged
Red: charging
Agency Approvals
Power Supply
Charging
Fire Retardant
UL listed
TUV licensed
Power Supply compliant to FCC part 15, Class B
CE Marking
CISPR Pub 22
UL94 V-0
11 - 4
12
Customer Support
Product Service and Repair
Honeywell International Inc. provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty service, contact the appropriate location below to obtain a
Return Material Authorization number (RMA #) before returning the product.
North America
Telephone: (800) 782-4263
E-mail: [email protected]
Latin America
Telephone: (803) 835-8000
Telephone: (800) 782-4263
Fax: (239) 263-9689
E-mail: [email protected]
Brazil
Telephone: +55 (11) 5185-8222
Fax: +55 (11) 5185-8225
E-mail: [email protected]
Mexico
Telephone: 01-800-HONEYWELL (01-800-466-3993)
Fax: +52 (55) 5531-3672
E-mail: [email protected]
Europe, Middle East, and Africa
Telephone: +31 (0) 40 2901 633
Fax: +31 (0) 40 2901 631
E-mail: [email protected]
Hong Kong
Telephone: +852-29536436
Fax: +852-2511-3557
E-mail: [email protected]
Singapore
Telephone: +65-6842-7155
Fax: +65-6842-7166
E-mail: [email protected]
China
Telephone: +86 800 828 2803
Fax: +86-512-6762-2560
E-mail: [email protected]
Japan
Telephone: +81-3-6730-7344
Fax: +81-3-6730-7222
E-mail: [email protected]
Online Product Service and Repair Assistance
You can also access product service and repair assistance online at www.honeywellaidc.com
.
12 - 1
Technical Assistance
If you need assistance installing or troubleshooting your device, please call your distributor or the nearest technical support office:
North America/Canada
Telephone: (800) 782-4263
E-mail: [email protected]
Latin America
Telephone: (803) 835-8000
Telephone: (800) 782-4263
E-mail: [email protected]
Brazil
Telephone: +55 (11) 5185-8222
Fax: +55 (11) 5185-8225
E-mail: [email protected]
Mexico
Telephone: 01-800-HONEYWELL (01-800-466-3993)
E-mail: [email protected]
Europe, Middle East, and Africa
Telephone: +31 (0) 40 7999 393
Fax: +31 (0) 40 2425 672
E-mail: [email protected]
Hong Kong
Telephone: +852-29536436
Fax: +852-2511-3557
E-mail: [email protected]
Singapore
Telephone: +65-6842-7155
Fax: +65-6842-7166
E-mail: [email protected]
China
Telephone: +86 800 828 2803
Fax: +86-512-6762-2560
E-mail: [email protected]
Japan
Telephone: +81-3-6730-7344
Fax: +81-3-6730-7222
E-mail: [email protected]
Online Technical Assistance
You can also access technical assistance online at www.honeywellaidc.com
.
12 - 2
Limited Warranty
Honeywell International Inc. ("HII") warrants its products and optional accessories to be free from defects in materials and workmanship and to conform to HII’s published specifications applicable to the products purchased at the time of shipment. This warranty does not cover any HII product which is (i) improperly installed or used; (ii) damaged by accident or negligence, including failure to follow the proper maintenance, service, and cleaning schedule; or (iii) damaged as a result of (A) modification or alteration by the purchaser or other party, (B) excessive voltage or current supplied to or drawn from the interface connections, (C) static electricity or electro-static discharge, (D) operation under conditions beyond the specified operating parameters, or (E) repair or service of the product by anyone other than HII or its authorized representatives.
This warranty shall extend from the time of shipment for the duration published by HII for the product at the time of purchase ("Warranty Period"). Any defective product must be returned (at purchaser’s expense) during the Warranty Period to HII factory or authorized service center for inspection. No product will be accepted by HII without a Return Materials Authorization, which may be obtained by contacting
HII. In the event that the product is returned to HII or its authorized service center within the Warranty
Period and HII determines to its satisfaction that the product is defective due to defects in materials or workmanship, HII, at its sole option, will either repair or replace the product without charge, except for return shipping to HII.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING
WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR
IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
HII’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR
REFURBISHED PARTS. IN NO EVENT SHALL HII BE LIABLE FOR INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF HII ARISING IN
CONNECTION WITH ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES
FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE
ACTUAL AMOUNT PAID TO HII FOR THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL
REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HII MAY HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROVINCES, OR
COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.
All provisions of this Limited Warranty are separate and severable, which means that if any provision is held invalid and unenforceable, such determination shall not affect the validity of enforceability of the other provisions hereof. Use of any peripherals not provided by the manufacturer may result in damage not covered by this warranty. This includes but is not limited to: cables, power supplies, cradles, and docking stations. HII extends these warranties only to the first end-users of the products. These warranties are non-transferable.
Limited Warranty Duration
• The duration of the limited warranty for terminals with an integrated imager is one year.
• The duration of the limited warranty for touch screens is one year.
• The duration of the limited warranty for Dolphin HomeBase, Dolphin Mobile Mount, Dolphin
ChargeBase, Dolphin Mobile Charger, and Dolphin QuadCharger is one year.
• The duration of the limited warranty for batteries is one year.
Use of any battery from a source other than Honeywell may result in damage not covered by the warranty. Batteries returned to Honeywell International Inc. in a reduced state may or may not be replaced under this warranty. Battery life will be greatly increased when following the battery instructions in this user’s guide.
12 - 3
How to Extend Your Warranty
Honeywell International Inc. offers a variety of service plans on our hardware products. These agreements offer continued coverage for your equipment after the initial warranty expires. For more information, contact your Sales Representative, Customer Account Representative, or Product Service
Marketing Manager from Honeywell International Inc., or your Authorized Reseller.
12 - 4
Honeywell Scanning & Mobility
9680 Old Bailes Road
Fort Mill, SC 29707 www.honeywellaidc.com
™
61-UG Rev B
10/11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement