Auto Meter Digital Stepper Temperature Harness Pin Out Dimensions & Pin Outs Owner manual

FULL Sweep TEMPERATURE Harness
Wire Identification and position
®
WEB-1003
(viewed from the wire in side of the plug)
WIRING DIAGRAM
1. Purple - Signal from sensor to gauge
2. Gray - 5 volt reference power
3. X=Empty
4. White - Dash lights, or may be empty
for non LED gauges.
5. X=Empty
6. Red - 12 volt switched power
7. X=Empty
8. Black - Gauge ground
9. X=Empty
10. X=Empty
(viewed from the wire in side of the plug)
5226
Harness
(viewed from the wire in side of the plug)
10
9
EMPTY
5
7
EMPTY
4
EMPTY
8
6
EMPTY
3
2
EMPTY
1
">