EH-QS100B/EH-QS100W
Remote Control Map
Quick Reference
Turn the projector on
Illuminate buttons temporarily
Turn the projector off
Select a source
Display the Information screen
Open menu to change brightness
Stop projection, press again to
resume
This Quick Reference card gives brief instructions on connecting your
projector and using common features. For details on setting up and
using the projector, see the online User’s Guide.
Change the aspect ratio
IMPORTANT: Before using this product, make sure you read these
instructions and the safety instructions in the online User’s Guide.
Playback controls for connected
devices that support HDMI CEC
standard
Change HDMI Link settings and
choose connected devices
Select dynamic range modes
Select color modes
Select image enhancement
options
Display and close the
projector’s menu
Adjust hue, saturation and
brightness for RGBCMY colors
Display the Memory menu
Display the Image Processing
screen
Select Frame Interpolation settings
Turn Sleep mode on or off
Display a test pattern
Open menu assigned by user
EPSON and Quick Corner are registered trademarks of Seiko Epson Corporation.
PrivateLine is a registered trademark of Epson America, Inc.
Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
Windows is a trademark of the Microsoft group of companies.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2024 Epson America, Inc., 8/24
CPD-65123
Printed in XXXXXX
Ethernet cable
Cancel current operation or return
to previous menu
RS-232C cable
Reset menu settings to their
default value
USB cable
Select settings and progress
through projector menus
HDMI cable
Navigate through menu settings
Turning the Projector On
1. T
urn on your computer or image
source.
2. Press the
On button on the
remote control or projector. After
the status light is solid blue, the
projector is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
On button; just
without pressing the
plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User’s Guide.
3. If your image does not appear, see
“Switching Between Image Sources”
or “Troubleshooting.”
Removing the Side Cover
To access the projector’s control panel,
focus lever, or connection ports, you
need to remove the side cover.
Changing the Language of
the Projector Menus
Digital Zoom
The default language of the projector’s
menu system is English, but you can
change it as necessary.
2. Select Installation > Digital Zoom.
1. Press the Menu button to access
the projector’s menu system.
1. Press the Menu button.
3. P
ress the or arrow buttons
to make the adjustment and press
Enter.
2. Select Management > Language.
4. Press the Menu or Esc button to
exit the menu.
3. Select your language.
Using the Focus Lever
4. W
hen you’re done, press the Menu
or Esc button to exit.
Switching Between Image
Sources
Press one of the source buttons
(remote control), or the Source button
(projector).
You can focus the image using the
focus lever.
1. R
emove the side cover. See
“Removing the Side Cover.”
2. M
ove the focus lever in small
increments to adjust the focus.
For help on using the projector’s
features to improve the image quality,
see the online User’s Guide. You can
also view information on how to adjust
the image color, brightness, contrast,
tint, saturation and dynamic range.
Turning the Projector Off
Press the Standby button on the
remote control or the Power button
on the projector to turn the projector
off. If you see a confirmation message,
press the Standby or Power
button again.
Note: If the Direct Power On function is
enabled, you can unplug the projector or flip
the switch controlling the outlet to which the
projector is connected instead. To turn on
this feature, see the online User’s Guide.
Troubleshooting
1. Slide the lever to release the cover.
2. P
ull the cover from the side of the
projector.
Making Other Image
Adjustments
Remote control
If you see a blank screen or the
message No signal
Projector
Adjusting Image Position
1. Press the Menu button.
2. Select Installation > Screen
Position.
3. P
ress the arrow buttons to adjust
the position of the projected image.
4. W
hen you’re done, press the
Menu or Esc button to finish the
adjustment.
If the projector is on a table, you can
level the image by turning any of the
projector’s adjustable feet.
•
ake sure the status light on the
M
projector is blue and not flashing.
•
Press the Blank button on the
remote control to see if the image
was temporarily turned off.
3. Replace the side cover.
Correcting Image Shape
If your image is uneven on the sides,
you can use the projector’s distortion
correction features, such as
Quick Corner®, Arc Correction, or Point
Correction to adjust the shape. See the
online User’s Guide.
You can use the Epson Setting
Assistant app to correct the shape of
the projected image using the camera
on your Android or iOS device.
•
•
ake sure the cables are
M
connected correctly. See the
online User’s Guide.
ou may need to change the image
Y
source. See “Switching Between
Image Sources.” Also make sure the
source device is turned on.
If the projector and the notebook
don’t display the same image
Windows®
Hold down the Windows key and
press P at the same time, then click
Duplicate.
Mac
On macOS 13.x or 14.x, select System
Settings > Displays. Press the + popup menu button, then choose a display
to mirror.
On macOS 12.x, select System
Preferences > Displays > Display
Settings. Select the projector, then
choose the mirror option for your
display from the drop-down menu.
On macOS 11.x and older, open
System Preferences and select
Displays. Click the Arrangement
tab and select the Mirror Displays
checkbox.
Registration
Scan the QR code to register for
product updates and exclusive offers.
Internet support
Visit http://epson.com/support
(U.S.) or http://epson.ca/support
(Canada) and search for your product
to download software and utilities, view
manuals, get FAQs and troubleshooting
advice, or contact Epson.
Speak to a support representative
To use the Epson® PrivateLine® Support
service, call (800) 637-7661. This service
is available for the duration of your
warranty period. You may also speak
with a projector support specialist by
dialing (562) 276-4394 (U.S.) or
(905) 709-3839 (Canada).
Support hours are 7 a.m. to 4 p.m.,
Pacific Time, Monday through Friday.
Days and hours of support are subject
to change without notice. Toll or long
distance charges may apply.
Purchase supplies and accessories
You can purchase an air filter
(V13H134AE0), screens, and other
accessories from an Epson authorized
reseller. To find the nearest reseller,
call 800-GO-EPSON (800-463-7766).
Or you can purchase online at
http://epsonstore.com (U.S. sales) or
http://epsonstore.ca (Canadian sales).
For a list of optional accessories, see
the online User’s Guide.
Where to Get Help
Manuals
For more information about using the
projector, you can view or download the
online manuals from the Epson website,
as described below.
">
