ed3538tr-power-over-link

Datasheet

ED3538T / ED3538R

Hardened 10/100BASE-TX PoL/PoE Ethernet Extender Kit

Value

Power over Ethernet up to 1.2 kilometers over pair copper wire

Ethernet extension solution with high transmission data rate up to 100Mbps

Ethernet extension up to 2.2 kilometers

PoL (Power over Link)

Advanced Single Cable Solution for Power and Data

ED3538T

Features

Complies with IEC61000-6-2 EMC Generic standard immunity for

Industrial environment

Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation,

Auto-MDI/MDIX

100Mbps communications link over existing copper telephone wire

Operates transparent to higher layer protocols

Six speeds with speed indicator LEDs on front panel of unit,

Up to 100Mbps @ about 300meters (984 ft.); 1Mbps @ about

2,200meters (7,2186 ft.)

MAX. 1.2km

Power and data are transmitted over copper pairs

ED3538R PoE

PoE IP camera

ED3538R supports IEEE802.3at PSE standard for PoE/PD applications

Supports Power Over Link application up to 1,200 meters (3,937 ft.) for Max. 5 watts power consumed PoE powered devices

Auto data rate negotiation for Ethernet extension interface

Redundant power inputs with Terminal Block and DC Jack

-40°C to 75°C (-40°F to 167°F) operating temperature range and tested at -40°C to 85°C (-40°F to 185°F)

Hardened aluminum case

Supports DIN-Rail, Panel and Rack mount installation

Ordering Information

ED3538T

ED3538R

Hardened 10/100BASE-TX Ethernet Extender with PoL Transceiver

Hardened 10/100BASE-TX PoE Ethernet Extender with PoL Receiver

Power Supply : (Optional)

* Option - The Terminal Block type external power supplies are not included. Please order the following part numbers:

DR-120-48, SDR-120-48, SDR-240-48, SDR-480-48

Diagrams

ED3538T

Unit: mm

ED3538R

50

110

Front Top / Bottom Side Top / Bottom Front

Amplicon.com

IT and Instrumentation for industry

Sales:

+44 (0) 1273 570 220

Website:

www.amplicon.com

Email:

[email protected]

Datasheet

Specifications

Technology

Standards

Protocols

Processing

Type

IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX,

IEEE802.3x, IEEE802.3af, IEEE802.3at PoE/PSE

Transparent to higher layer protocols

IEEE802.3x Full-duplex flow control

Power

Input Terminal Block: 46 - 57VDC

DC JACK: 48VDC

2.5A @ 48VDC (Peak current 3.26A)

Power

Consumption

Max. 65W with Power over Link (PoL) function enabled

ED3538T: Max. 5W (without PoL / PoE)

ED3538R: Max. 5W (without PoL / PoE)

Max. 35W (with PoE only)

Supports overload current protection

Supports reverse polarity protection

Mechanical

Casing

Dimensions

Weight

Installation

Interface

Ethernet Port

Aluminum case

IP30

50mm (W) x 110mm (D) x 135mm (H)

(1.97" (W) x 4.33" (D) x 5.31" (H))

0.8Kg (1.76lbs.)

DIN-Rail (Top hat type 35mm), Panel, Rack Mounting

Ethernet

Extender Port

ED3538T/R: 1x RJ-45 port,10/100BASE-TX Full-duplex,

ED3538R: 1x PoE/PSE port

Auto-Negotiation, Auto-MDI/MDIX

Speed: 10/100Mbps

Distance: 100meters (328ft.)

Cable: 100BASE-TX: UTP CAT. 5 (4-pair wire)

Port: One RJ-11 and one 2-pin Terminal Block

Distance:

Power over Link (PoL) Enable

Distance

300M

400M

600M

800M

1000M

1200M

Data Rate

100Mbps

90Mbps

60Mbps

45Mbps

35Mbps

20Mbps

ED3538R

PoE Output

30.0W

15.4W

14.0W

9.5W

7.0W

5.0W

Power over Link (PoL) Disable

(Power Supply Applies on ED3538R)

Distance

1400M

1600M

1800M

UP to 2200M

Data Rate

15Mbps

10Mbps

3Mbps

1Mbps

ED3538R

PoE Output

30.0W

30.0W

30.0W

30.0W

NOTE: Reference Performance on 24 AWG copper wire (0.5mm diameter, 1-pair wire, Cable impendence:

100ohm)

DIP switch ED3538T: PoL: ON/OFF, Type: Per/Std

ED3538R: Mode: Loc/Rmt, Type: Per/Std

LED Indicators Per Unit: Power Status (Power)

Per Port: 10/100TX: Link/Activity, Full-duplex

Line Speed: Six indicators for 100/80/60/40/20Mbps and Link below 20Mbps

PoE: Power over Ethernet function availability

Environment

Operating

Temperature

-40°C to 75°C (-40°F to 167°F)

Tested @ -40°C to 85°C (-40°F to 185°F)

Storage

Temperature

-40°C to 85°C (-40°F to 185°F)

Ambient

Relative

Humidity

5% to 95% (non-condensing)

Regulatory Approvals

ISO Manufactured in an ISO9001 facility

Safety UL60950-1, IEC60950-1

EMI FCC Part 15, Class A

EN61000-6-4

- EN55022

- EN61000-3-2

- EN61000-3-3

EMS EN61000-6-2

- EN61000-4-2 (ESD Standards)

Contact: + / - 4KV

Air: + / - 8KV

- EN61000-4-3 (Radiated RFI Standards)

10V/m, 80 to 1000MHz; 80% AM

- EN61000-4-4 (Burst Standards)

Signal Ports: + / - 4KV

D.C. Power Ports: + / - 4KV

- EN61000-4-5 (Surge Standards)

Signal Ports: + / - 2KV; Line-to-Line

D.C. Power Ports: + / - 0.5KV; Line-to-earth

- EN61000-4-6 (Induced RFI Standards)

Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM

D.C. Power Ports: 10Vrms @ 0.15 - 80MHz;

80% AM

- EN61000-4-8 (Magnetic Field Standards)

30A/m @ 50, 60Hz

Environmental

Test

Compliance

IEC60068-2-6 Fc (Vibration Resistance)

5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport)

IEC60068-2-27 Ea (Shock)

25g @ 11ms (Half-Sine Shock Pulse; Operation)

50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)

IEC60068-2-32 Ed (Free Fall)

1M (3.281ft.)

Amplicon.com

IT and Instrumentation for industry

Sales:

+44 (0) 1273 570 220

Website:

www.amplicon.com

Email:

[email protected]