DP2K C-series

Compact DLP Cinema

®

projectors

Preliminary

Key benefits

• Based on Barco’s proven compact platform featuring the 0.98” DLP

Cinema ® chip

• Budget-friendly solution with minimal cost of ownership thanks to low lamp operating cost, re-usable filters, low maintenance, etc.

• Maximum ease-of-use through intuitive user interface

• Long-term image quality and brightness thanks to Barco proprietary sealed engine and advanced DMD cooling

• Easy installation and maintenance thanks to proven modular design and common platform with DP2K B-series

• Next-generation electronics ready for

DLP Cinema ® Enhanced 4K*

Building on many years’ experience in digital cinema, Barco has developed a new generation of modular cinema projectors: the DP2K series.

For small and mid-size movie theaters, Barco created a dedicated family of compact

DP2K C-series projectors, based on Texas Instruments’ proven 0.98” DLP Cinema ® chip.

The C-series combine the renowned image quality and easy-to-use modular design of a Barco projector in a budget-friendly, compact form factor.

Compact footprint, budget-friendly solutions

The Barco DP2K-12C is ideal for screens up to 12m, whereas the DP2K-15C is the perfect companion for screens up to 15m. Flagship of the C-series is the DP2K-20C, which creates an intense movie experience on screens up to 20m wide. All three projectors are perfectly suited for high-quality 3D cinema.

*dependent on availability of DLP Cinema® enhanced 4K 0.98” DMD from Texas Instruments

DP2K C-series specifications

Digital Micro Mirror devices

Native resolution

Housing

Lamp power

Light output

Screen width (screen gain 1:8) @ 14ftl*

Screen width (screen gain 1:4) @ 14ftl*

Screen width (screen gain 1:2) @ 14ftl*

(*) = + 10% variation possible between units

Contrast ratio

Digital video inputs

DP2K-12C

3 x 0.98”” DC2K dark metal devices

2,048 x 1,080 pixels

1.5kW - 2kW

9,500 lumens up to 12m - 40ft

DP2K-15C hermetically sealed DMD’s and optical assembly

1.5kW - 3kW

14,500 lumens up to 15m - 50ft

Prime lenses

Projector diagnostics

Power requirements

Dimensions (projector head)

Weight

Max. ambient temperature

Exhaust airflow

Standard features

Options

Order information

DP2K-20C

1.5kW - 4kW

18,000 lumens up to 20m - 65ft

2,000:1

2 x SMPTE 292M inputs

2 x DVI input both selectable as single and dual link

1.2 - 1.8

1.4 - 2.05

1.6 - 2.5

1.95 - 3.2

2.4 - 3.9

via PC touch panel via Communicator control software via SNMP agent

220V

558(H) x 694(W) x 1034(D) mm - 22.0(H) x 27.3(W) x 40.7(D) inch

NB.: min. 5 cm of air inlet spacing required at the bottom of projector

102 kg (225 lbs) 100 kg (220lbs)

35°C / 95°F

102 kg (225lbs)

235 CFM

CLO (Constant Light Output)

Powerful SNMP agent

Motorized/memorized lenses (focus, zoom & shift)

HDCP support

Full 2K triple flash 3D

ACS-2048

Auto lamp alignment

3D add-ons

Touch panel

Pedestal

R9005707 R9004448 R9004447

R599256

M00274-R01-0310-DS

The information and data given are typical for the equipment described.

However any individual item is subject to change without any notice.

The latest version of this brochure can be found on www.barco.com.

www.barco.com/digitalcinema

Barco

Pres. Kennedypark 35, 8500 Kortrijk, Belgium

T +32 56 36 80 47 - F +32 56 36 83 86 email: [email protected]

11101 Trade Center Drive,

Rancho Cordova, CA 95670, USA

T +1 916 859 2500 - F +1 916 859 2515

P.R. China

No. 16 Changsheng road,

Changping district, Beijing, 102200

T +86 10 8010 1166 - F +86 10 8010 5835