advertisement
HDMI Over CAT5
Receiver at 100 Meters
Operation Manual
CA-HDMI100R
Disclaimers
The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means - electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2010 by Cypress Technology.
All Rights Reserved.
Version 1.0 December 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No
VS1
Date
20101201
Summary of Change
Add HDCP Description
TABLE OF CONTENTS
1. Introduction................................................................................ 1
2. Features...................................................................................... 1
3. Package Contents.................................................................... 1
4. Operation Controls and Functions........................................... 2
4.1 Front Panel........................................................................... 2
4.2 Rear Panel........................................................................... 2
5. Specifications............................................................................ 3
6. Connection and Installation.................................................... 4
1. Introduction
This is the receiver (Rx) unit of HDMI over CAT5 Tx/Rx solution, works with HDMI over CAT5 transmitter, can extend HDMI signal through CAT-5 cables for a distance up to 100 meters. The installation of HDMI Over CAT5 is easy and quick, simply place the transmitter next to your HDTV source such as a DVD player, then place this unit next to your display, and get all necessary cables connected to complete and enjoy.
2. Features
Compliant with HDMI 1.2, and DVI 1.0 specifications.
Supports CAT-5/CAT-5E/CAT-6 cables of variable types.
Supports high definition input up to 1080P, output resolution follows input.
Easy to install and simple to operate.
Not compatible with HDCP Source.
Note: This product does not process HDCP input. When receiving contents that has HDCP encruption there will be no video output.
3. Package Contents
HDMI Over CAT5 Receiver at 100 Meters
5VDC Power Supply Adaptor
Operation Manual
1
4. Operation Controls and Functions
4.1 Front Panel
HDMI OUTPUT
CAT
5
to HDMI 100
1
①
HDMI OUTPUT:
Connect the HDMI output port to the HDMI input of your display.
4.2 Rear Panel
EQUALIZER GAIN
DDC
MIN
ADJUST
MAX
VIDEO
CAT5 INPUT
DC 5V
1 2 3 4 5
①
EQUALIZER:
Use this switch to adjust signal enhancement over long distance.
②
GAIN:
Use this switch to adjust brightness.
③
DDC INPUT:
Connect the DDC input to the DDC output of the transmitter unit using
CAT-5/CAT-5E/CAT-6 cable.
④
VIDEO INPUT:
Connect the VIDEO input to the VIDEO output of the transmitter unit using
CAT-5/CAT-5E/CAT-6 cable.
⑤
Power:
Plug the 5VDC power supply into the unit and connect the adaptor to AC
wall outlet.
2
5. Specifications
Supported resolutions: HDMI - 480i/480p, 576i/576p, 720P@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz
Input: 1* CAT-5 input for VIDEO, 1* CAT-5 input for DDC
Output: 1* HDMI female port
Power: 5V / 2.6A DC power supply
Dimensions: 123(W) x 125(D) x 30(H)mm
Weight: 700g
3
6. Connection and Installation
DVD Player
HDMI
STB
HDMI
HDMI
HDMI
Cable
OR
HDMI
Cable
HDMI
HDMI INPUT
HDMI to CAT
5
Transmitter Unit
Front
VIDEO (CAT-5 Cable)
VIDEO DDC
DC 5V
CAT5 OUTPUT
Transmitter Unit
Rear
DDC (CAT-5 Cable)
100 Meters
4
EQUALIZER GAIN
DDC VIDEO
MIN
ADJUST
MAX
CAT5 INPUT
Receiver Unit
Rear
DC 5V
HDMI OUTPUT
Receiver Unit
Front
CAT
5
to HDMI 250
HDMI
HDMI
Cable
HDMI
HDMI
Display
Cypress HDMI Over CAT5 Series:
Product
CA-HDMIAT
CA-HDMI 50R
CA-HDMI 100R
CA-HDMI 150R
CA-HDMI 250R
Description
HDMI Over CAT5 Transmitter
HDMI Over CAT5 Receiver at 50 meters
HDMI Over CAT5 Receiver at 100 meters
HDMI Over CAT5 Receiver at 150 meters
HDMI Over CAT5 Receiver at 250 meters
5
Acronyms
Acronym
CV
NTSC
OSD
PAL
RGB
SV
Complete Term
Composite Video
National Television System Committee
On-Screen-Display
Phase Alternating Line
Red Green Blue
S-Video
A
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20070803 MPM-CAHDMI100R
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project