Bewinner 617-R58P Thermal Bluetooth Printer Installation Guide

Below you will find brief information for 617-R58P. This thermal Bluetooth printer supports printing on both receipt and label paper, with adjustable print width. It's compatible with Android and iOS devices via Bluetooth and can also connect to computers. The printer has a compact, lightweight design and a large-capacity rechargeable lithium battery. It features wired and wireless interfaces and supports client local program upgrades. The printer has self-check and black mark test capabilities and offers ESC/POS compatible command sets.

PDF
Document
617-R58P Thermal Bluetooth Printer Guide | AI Chat & PDF Access | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Prints receipt and label paper (30-57mm width)

  • Bluetooth connectivity with Android & iOS

  • Compact and lightweight for portability

  • Rechargeable 2000mAh lithium battery

  • Wired and wireless interfaces available

  • ESC/POS command compatible

Frequently asked questions

Long press the power button for 2 seconds until you hear a drip sound, and the BT indicator lights up green.

Press and hold the power button and feed button at the same time. The printer will print a self-check page with the printer status and settings.

With paper loaded, turn off the printer. Then, press the power and feed buttons for 5 seconds until the printer prints indicating mode shift. The printer automatically shuts down and needs to be turned on again.

The printer is charging, and when the charge is full, the orange light goes off.

The Bluetooth pairing password is 0000.

Preparing document for printing…
0%