UM3506
User manual
Getting started with the NFC card reader expansion board based on ST25R300
for STM32 and STM8 Nucleos
Introduction
The X-NUCLEO-NFC12A1 NFC card reader expansion board is based on the ST25R300 device.
The expansion board is configured to support all five NFC Forum tag types in reader mode.
The ST25R300 manages frame coding and decoding in reader mode for standard applications. It supports ISO/IEC 14443 type
A and B, ISO/IEC 15693 (single subcarrier only) and ISO/IEC 18092 communication protocols as well as the detection, reading
and writing of NFC Forum type 1, 2, 3, 4, and 5 tags.
Integrated HF reader/NFC initiator/NFC target IC with an antenna etched on the PCB and the related tuning circuit.
Figure 1. X-NUCLEO-NFC12A1 expansion board
Notice:
For dedicated assistance, please submit a request through our online support portal at www.st.com/support.
UM3506 - Rev 1 - April 2025
For further information, contact your local STMicroelectronics sales office.
www.st.com
UM3506
Getting started
1
Getting started
1.1
Overview
The X-NUCLEO-NFC12A1 expansion board features:
•
•
•
•
•
•
•
•
•
•
1.2
On-board NFC card reader and host card emulation IC: ST25R300
NFC Forum NFC-A, NFC-B, NFC-F, and NFC-V poller
NFC Forum NFC-A, NFC-F listener
13.56 MHz inductive antenna, 47 x 34 mm, four turns, etched on PCB and associated tuning circuit
Possibility of driving two antennas in a single-ended configuration
Six general-purpose LEDs
Equipped with Arduino® UNO R3 connector
Free comprehensive development firmware library compatible with STM32Cube and samples for
ST25R300
FCC and CE certified
RoHS and WEEE compliant
Board connection
Connect the X-NUCLEO-NFC12A1 to an STM32 Nucleo-64 development board via Arduino® UNO R3
connectors.
The PC USB port has to be capable to delivering at least 300 mA at 5 V supply.
A green LED indicates whether the 5 V supply is present, while the six status LEDs are controlled via MCU.
Provision for unpopulated jumpers enables alternative connections of all lines (except the SPI) to the STM32
MCU.
To demonstrate the wake-up feature, two capacitive electrodes are placed on the PCB and the automatic antenna
tuning variable capacitors are also implemented.
The board is connected to a power supply. It should be used on a clean and nonflammable surface.
1.3
Hardware requirements
The X-NUCLEO-NFC12A1 expansion board is designed to be used with any STM32 Nucleo board, although
complete testing has been performed using the NUCLEO-L476RG hosting the STM32L476RG microcontroller.
The STM32 Nucleo firmware and the related documentation are available at dedicated page.
1.4
System requirements
To use STM32 Nucleo boards with the X-NUCLEO-NFC12A1 expansion board the following software and
hardware are required:
•
•
•
•
An STM32 Nucleo-64 development board
A Windows® PC to install the firmware package
A USB type A to Mini-B USB cable to connect the STM32 Nucleo board to the PC
The unit must be supplied by a safety extralow voltage with falling characteristics (<5 V, <15 W), according
to EN60950-1. This power supply has to be classified as electrical source 1 (ES1), PS1 according to
EN62368-1
To install the board firmware package (order code: X-CUBE-NFC12) the PC must have:
•
•
128 MB of RAM
40 MB of free hard disk space
The X-CUBE-NFC12 firmware and the related documentation are available at ST site.
UM3506 - Rev 1
page 2/18
UM3506
Board setup
2
Board setup
To set up the board:
UM3506 - Rev 1
Step 1.
Connect the X-NUCLEO-NFC12A1 expansion board to the STM32 Nucleo board from the top through
the Arduino® UNO R3 connectors
Step 2.
Power the STM32 Nucleo board using a Mini-B USB cable
Step 3.
Program the firmware on the STM32 Nucleo board using the provided example
Step 4.
Reset the MCU using the reset button available on the STM32 Nucleo board.
The evaluation kit is ready to be used.
page 3/18
UM3506
Hardware
3
Hardware
The X-NUCLEO-NFC12A1 expansion board allows the user to test the functionality of the ST25R300, which
supports the reader/writer and the card emulation modes.
The ST25R300 IC module and the STM32 Nucleo board are connected through CN5, CN6, CN8 and CN9
connectors (see the tables below).
Table 1. Interconnections between the X-NUCLEO-NFC12A1 expansion board and the NUCLEO-L476RG
board (left side)
Signal
Connector
Pin number
NUCLEO-L476RG
X-NUCLEO-NFC12A1
NC
1
(NC)
(NC)
IOREF
2
3V3 (VDD_IO)
(NC)
RESET
3
NRST
(NC)
4
3V3 (VDD_IO)
3V3 (VDD_IO)
5
5V (VDD)
5V (VDD)
GND
6
GND
GND
GND
7
GND
GND
VIN
8
VIN
NC
A0
1
PA0
IRQ_MCU
A1
2
PA1
MCU_LED1
3
PA4
MCU_LED2
4
PB0
MCU_LED3
A4
5
PC1
-
A5
6
PC0
-
3V3
5V
A2
A3
CN6 Power
CN8 Power
Table 2. Interconnections between the X-NUCLEO-NFC12A1 expansion board and the NUCLEO-L476RG
board (right side)
Signal
Pin number
NUCLEO-L476RG
X-NUCLEO-NFC12A1
D15
10
PB8
SCL_MCU
D14
9
PB9
SDA_MCU
AVDD
8
AVDD
NC
GND
7
GND
GND
6
PA5
SCLK_MCU
5
PA6
MISO_MCU
D11
4
PA7
MOSI_MCU
D10
3
PB6
/SS_MCU
D9
2
PC7
-
D8
1
PA9
RESET
D7
8
PA8
MCU_LED4
D6
7
PB10
MCU_LED5
6
PB4
MCU_LED6
5
PB5
-
D3
4
PB3
NC
D2
3
PA10
NC
D13
D12
Connector
CN5 Digital
D5
D4
UM3506 - Rev 1
CN9 Digital
page 4/18
UM3506
Hardware
Signal
D1
Connector
CN9 Digital
D0
3.1
Pin number
NUCLEO-L476RG
X-NUCLEO-NFC12A1
2
PA2
NC
1
PA3
NC
Host interface and GPIO connection
The X-NUCLEO-NFC12A1 expansion board contains the ST25R300-AQET chip and is powered by the STM32
Nucleo board.
The ST25R300 is driven by the microcontroller via an SPI interface.
The six LEDs indicate the detected RFID technology (for example, ISO14443 Type A for LED4).
3.2
X-NUCLEO-NFC12A1 expansion board component placement
Figure 2. X-NUCLEO-NFC12A1 component placement
1. General purpose LEDs
2. ST25R300
3. Matching circuit
4. 47x34 mm four-turn antenna
3.3
ST25R300 device
The ST25R300 is a high-performance NFC universal device supporting NFC initiator, NFC target, NFC reader,
and NFC card emulation modes.
The ST25R300 includes an advanced analog front end (AFE) and a highly integrated data framing system for:
•
•
•
•
UM3506 - Rev 1
ISO 18092 passive and active initiator, ISO18092 passive and active target
NFC-A/B (ISO 14443A/B) reader including higher bit rates
NFC-F (Felica™) reader
NFC-V (ISO 15693) reader up to 53 kbps
page 5/18
UM3506
Hardware
•
NFC-A and NFC-F card emulation
Special stream and transparent modes of the AFE and framing system can be used to implement other custom
protocols such as MIFARE® classic in reader or card emulation mode.
UM3506 - Rev 1
page 6/18
Schematic diagrams
Figure 3. X-NUCLEO-NFC12A1 circuit schematic (1 of 3)
Extension connectors
LED6
LED5
3V3
1K
1K
1K
1K
680R
1K
CN9
CN8
1
2
3
4
5
6
PA0
PA1
PA4
PB0
PC1
PC0
Header 6X1_Female
A0
A1
A2
A3
A4
A5
ST10
ST12
ST14
ST16
ST18
ST20
SPI_IRQ
LED1
LED2
LED3
LED4
LED5
LED6
ST9
ST11
ST13
ST15
D7
D6
D5
D4
D3
D2
D1
D0
PA8
PB10
PB4
PB5
PB3
PA10
PA2
PA3
8
7
6
5
4
3
2
1
Arduino Connector
Arduino Connector
R7
1K
LED7
Header 10X1_Female
Header 8X1_Female_samtec
PWR Ok
LED1
R6
RESET
LED2
LED6
PA5
PA6
PA7
PB6
PC7
PA9
R5
D13
D12
D11
D10
D9
D8
LED3
LED5
ST3
ST4
ST5
ST6
ST7
ST8
10
9
8
7
6
5
4
3
2
1
R4
SPI_SCLK
SPI_MISO
SPI_MOSI
SPI_BSS
LED4
CN5
LED4
PB8
PB9
R3
D15
D14
LED3
ST1
ST2
R2
C1
2µ2
1
2
3
4
5
6
7
8
I2C_SCL
I2C_SDA
Arduino Connector
Arduino Connector
CN6
LED2
VBUS
R1
3V3
+5V
VBUS
LED1
UM3506 - Rev 1
4
Header 8X1_Female_samtec
SPI_BSS
SPI_MOSI
SPI_SCLK
SPI_IRQ
SPI_MISO
RESET
I2C_SDA
I2C_SCL
SPI_BSS
SPI_MOSI
SPI_SCLK
SPI_IRQ
SPI_MISO
RESET
I2C_SDA
I2C_SCL
UM3506
Schematic diagrams
page 7/18
SPI_SCLK
R10
SPI_IRQ
SPI_MISO
R12
0R
0R
R11
0R
RESET
R13
NC
I2C_SDA
R14
0R
MOSI_300
MISO_300
18k
TP2
NC
GND
GND
TAD2_300
NC
R15
0R
TP3
NC
TAD2
NC
TAD1_300
RESET_300
R17
330k
GND
IRQ_300
MISO_300
BSS_300
MOSI_300
SCLK_300
RESET_300
XTI
XTO
VDD_IO
C2
100nF
GND
GND
VDD_IO
IRQ
MISO
BSS
MOSI
SCLK
RESET
XTI
XTO
VDD_IO
Crystal circuit
V_RF
L1
0R
1
2
30
31
32
29
26
27
3
XTI
XTO
VDD
C3
1µ
C4
10n
C5
2µ2
RFI2
CE_GPIO2
RFO2
RFO1
CE_GPIO1
HF Reader IC
RFI1
TAD2
TAD1
ST25
R300
Y1
C6
12p
C7
12p
GND
GND
GND
GND
GND
RFI1
RFI2
NC
GND
13
19
5
20
23
18
4
3
VDD
VDD_TX
VDD_D
VDD_A
AGD
VDD_DR
COM_2
COM_1
TP4
TP5
U1
ST25R300
22
9
16
14
6
21
12
11
RFI2
RFI1
TAD2
TAD1
RFI2
CE_GPIO2
RFO2
RFO1
CE_GPIO1
RFI1
TAD2
TAD1
GND_D
NC GND
NC GND
NC GND
NC GND
GND_GPIO
GND_A
VSS (E.P.)
VSS
GND_DR
GND_1 GND_2
6
3V3
0R
VDD
VDD
VDD_D
VDD_A
AGD
VDD_DR
X1
435151014845
GND
P2
1
TP6
5
NO_2
NO_1
Antenna Connection
1
TAD1
GND
2
1
R23
TP1
NC
RESET_300
R16
1k
VBUS
P1
IRQ_300
Reset circuit
3V3
R18
NC
SCLK_300
0R
0R
I2C_SCL
ST25R300 HF Reader
BSS_300
R9
2
R8
SPI_MOSI
2
SPI_BSS
4
8
24
17
10
7
25
33
28
15
UM3506 - Rev 1
Figure 4. X-NUCLEO-NFC12A1 circuit schematic (2 of 3)
VDD_IO
VDD_DR
AGD
VDD_D
VDD_A
VDD
GND
VDD_TX
VDD_IO
VDD
C8
100nF
C9
2µ2
VDD_D
VDD_A
AGD
VDD_DR
TP7
TP8
TP9
TP10
TP11
TP12
NC
NC
NC
NC
NC
NC
TP13
TP14
NC
NC
TP15
TP16
NC
NC
GND
GND
GND
C10
10n
GND
C11
2µ2
GND
C12
10n
GND
C13
2µ2
GND
C14
10n
GND
C15
1µ
GND
C16
10n
GND
C17
47n
GND
UM3506
Schematic diagrams
page 8/18
UM3506 - Rev 1
Figure 5. X-NUCLEO-NFC12A1 circuit schematic (3 of 3)
ANT2
C19
NC
C18
NC
Q1
NC
CE_GPIO1_AAT
CE_GPIO2_AAT
GND
CE_GPIO1
L2
RFO1
C25
150p
NC
C23
68p
C26
2R2
RFO2
CE_GPIO2
C28
130p
GND
C33
NC
C35
C31
130p
C32
NC
ANT1
120nH
CE_GPIO2
0R
2
GND
1
68p
GND
R24
C29
NC
GND
C30
330p
GND
Q4
NC
R19
ANT2
C27
330p
L3
GND
C21
NC
C24
10p
120nH
1
2
J1 NC
GND
3
CE_GPIO1
Q3
NC
TAD2
C22
150p
RFI1
Q2
NC
TAD1
C20
NC
ANT1
ANT_NFC06
R20
2R2
C34
150p
C36
10p
RFI2
C37
150p
ANT1
TAD1
TAD2
TAD1
CE_GPIO1_AAT
TAD2
C39
NC
C38
NC
GND
Q5
NC
CE_GPIO2_AAT
Q6
NC
TAD1
C40
NC
Q7
NC
TAD2
CE_GPIO1
CE_GPIO2
NC
0R
R21
0R
R22
NC
CE_GPIO1_AAT
CE_GPIO2_AAT
GND
GND
GND
C41
NC
Q8
NC
GND
UM3506
Schematic diagrams
page 9/18
UM3506
Bill of materials
5
Bill of materials
Table 3. X-NUCLEO-NFC12A1 bill of materials
Item
UM3506 - Rev 1
Q.ty
Ref.
Part/Value
Description
Manufacturer
Order code
1
5
C1, C5, C9,
C11, C13
2u2
2u2_X5R
Murata
GRM155R60J225ME01D
2
2
C2, C8
100n
100n_X7R
Murata
GCM155R71H104KE02J
3
2
C3, C15
1u
1u_X5R
MURATA
GRM155R61C105KA12D
4
5
C4, C10, C12,
C14, C16
10n
10n_x7R
AVX
04023C103KAT2A
5
2
C6, C7
12p
12p_COG
Murata
GCM1555C1H120FA16D
6
1
C17
47n
47n_X7R
Murata
GCM155R71E473KA55D
7
2
C18, C38
6p8
6.8p_COG
Murata
GCM1555C1H6R8BA16D
8
2
C19, C39
12p
12p_COG
Murata
GCM1555C1H120FA16D
9
2
C20, C40
27p
27p_COG
Murata
GCM1555C1H270FA16D
10
2
C21, C41
68p
68p_COG
Murata
GRT1555C1H680FA02J
11
2
C22, C37
150p
150p_COG
Murata
GCM1555C1H151FA16D
12
2
C23, C35
100p
100p_COG
Murata
GCM1885C2A101FA16D
13
2
C24, C36
10p
10p_COG
Murata
GCM1555C1H100FA16D
14
2
C25, C34
150p
150p_COG
KEMET
C0603C151F5GACTU
15
2
C26, C33
68p
68p_COG
KEMET
C0603C680F1GACTU
16
2
C27, C30
330p
330p_COG
YAGEO
CC0603FRNPO9BN331
17
2
C28, C31
130p
130p_COG
KEMET
C0603C131F5GACTU
18
2
C29, C32
6p8
6.8p_COG
KEMET
C0603C689J5GACTU
19
1
CN5
Header, 10-Pin,
Single
row,female
Samtec
SSQ-110-03-L-S
20
2
CN6, CN9
Header, 8-Pin,
Single
row,female
Samtec
SSQ-108-03-L-S
21
1
CN8
Header, 6-Pin,
Single
row,female
Samtec
SSQ-106-03-L-S
22
1
L1
muRata
BLM15EG121SH1D
23
2
L2, L3
LQW18CNR27J
Murata
0ZD
LQW18CNR12J0ZD
24
6
LED1, LED2,
LED3, LED4,
LED5, LED6
Lite-On
LTST-C190TBKT
25
1
LED7
Lite-On
LTST-C190KGKT
26
2
P1, P2
U.FL-R-SMT-1
HIROSE(HRS)
U.FL-R-SMT-1(10)
27
8
Q1, Q2, Q3, Q4,
Q5, Q6, Q7, Q8
nCh MOS Fet
Diodes
Incorporated
BSS123WQ-7-F
28
7
R1, R2, R3, R4,
R5, R6, R16
1k
1k, 0402
Panasonic
ERJ2GEJ102X
29
1
R7
680R
680R, 0402
Yageo
RC0402JR-07680RL
page 10/18
UM3506
Bill of materials
Item
UM3506 - Rev 1
Q.ty
Ref.
Part/Value
Description
Manufacturer
Order code
30
8
R8, R9, R10,
R11, R12, R18,
R23, R24
0R
0R, 0402
VISHAY
CRCW04020000ZSTD
31
4
R21, R22, R14,
R15
0R
0R, 0402
VISHAY
CRCW04020000ZSTD
32
1
R13
18k
18k, 0402
MULTICOMP
MCWR04X1802FTL
33
1
R17
330k
330k, 0402
VISHAY
CRCW0402330KFKED
34
2
R19, R20
2R2
2R2, 0603
Vishay Dale
CRCW06032R20FKEA
35
18
ST1, ST2, ST3,
ST4, ST5, ST6,
ST7, ST8, ST9,
ST10, ST11,
ST12, ST13,
ST14, ST15,
ST16, ST18,
ST20
36
1
U1
ST
ST25R300-AQET
37
1
X1
Tactile Switches
Wurth
WS-TASV Tact
Elektronik
Switch
435151014845
38
1
Y1
NX2016SA-27.1
2MHZ-EXS00A- NDK
CS01188
CS01188-27.12M
CONN HE14
2PTS MALE
VERTICAL NOT
FITTED
ST25R300AQET QFN32
HF Reader IC
QFN32
page 11/18
UM3506
Board versions
6
Board versions
Table 4. X-NUCLEO-NFC12A1 versions
PCB version
Schematic diagrams
Bill of materials
XN$NFC12A1A (1)
XN$NFC12A1A schematic diagrams
XN$NFC12A1A bill of materials
1. This code identifies the X-NUCLEO-NFC12A1 expansion board first version. It is printed on the board PCB.
UM3506 - Rev 1
page 12/18
UM3506
Regulatory compliance information
7
Regulatory compliance information
Notice for US Federal Communication Commission (FCC)
Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Part 15.21
Any changes or modifications to this equipment not expressly approved by STMicroelectronics may cause
harmful interference and void the user’s authority to operate this equipment.
Part 15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice for Innovation, Science and Economic Development Canada (ISED)
FCC ID: YCPNFC12A1
This device complies with Innovation, Science and Economic Development Canada's license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Notice for the European Union
The X-NUCLEO-NFC12A1 is in conformity with the essential requirements of the Directive 2014/53/EU (RED)
and of the Directive 2015/863/EU (RoHS). Applied harmonized standards are listed in the EU Declaration of
Conformity.
Notice for United Kingdom
The X-NUCLEO-NFC12A1 is in compliance with the UK Radio Equipment Regulations 2017 (UK SI 2017 No.
1206 and amendments) and with the Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012 (UK SI 2012 No. 3032 and amendments). Applied standards are listed in
the UK Declaration of Conformity.
UM3506 - Rev 1
page 13/18
UM3506
Revision history
Table 5. Document revision history
UM3506 - Rev 1
Date
Revision
29-Apr-2025
1
Changes
Initial release.
page 14/18
UM3506
Contents
Contents
1
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2
Board connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3
Hardware requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.4
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2
Board setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3.1
Host interface and GPIO connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.2
X-NUCLEO-NFC12A1 expansion board component placement . . . . . . . . . . . . . . . . . . . . . . . . 5
3.3
ST25R300 device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4
Schematic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5
Bill of materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
6
Board versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
7
Regulatory compliance information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
List of tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
List of figures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
UM3506 - Rev 1
page 15/18
UM3506
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Interconnections between the X-NUCLEO-NFC12A1 expansion board and the NUCLEO-L476RG board (left side) 4
Interconnections between the X-NUCLEO-NFC12A1 expansion board and the NUCLEO-L476RG board (right side)
................................................................................ 4
X-NUCLEO-NFC12A1 bill of materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
X-NUCLEO-NFC12A1 versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
UM3506 - Rev 1
page 16/18
UM3506
List of figures
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
UM3506 - Rev 1
X-NUCLEO-NFC12A1 expansion board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
X-NUCLEO-NFC12A1 component placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
X-NUCLEO-NFC12A1 circuit schematic (1 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
X-NUCLEO-NFC12A1 circuit schematic (2 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
X-NUCLEO-NFC12A1 circuit schematic (3 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
page 17/18
UM3506
IMPORTANT NOTICE – READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names
are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2025 STMicroelectronics – All rights reserved
UM3506 - Rev 1
page 18/18
">
