TAIDEN Discussion Unit User Manual
पीडीएफ
दस्तऐवज
जाहिरात
जाहिरात
3.2.2 Installation G-series discussion unit can be installed as tabletop or Note: flush-mounted. ) For embedded installation, the supporting edge For flush-mounted: HCS-4886MP must be ordered separately and a. Make a recess on the table according to the fixed onto the unit before delivery. dimensions in figure 3.4; b. Drill two Ø 4 mm screw holes at the bottom of the d. Run the two cables on the back of the discussion recess according to figure 3.4. The distance between unit according to the existing mounting feasibilities the centers of the screw holes is 215 mm; e. Fix the discussion unit with screws from the c. Put the discussion unit into the recess until the bottom. The length of the screws is based on the decorative sheet can fit with the table-board; thickness of the table. Figure 3.4 Installation diagram of G-series discussion unit flush-mounted (unit: mm) 45 ">
/
डाउनलोड
फक्त एक मैत्रीपूर्ण स्मरणपत्र. आपण येथे दस्तऐवज पाहू शकता. परंतु सर्वात महत्त्वाचे म्हणजे, आमच्या एआयने ते आधीच वाचले आहे. हे गुंतागुंतीच्या गोष्टी सोप्या भाषेत समजावून सांगू शकते, आपल्या प्रश्नांची उत्तरे कोणत्याही भाषेत देऊ शकते आणि अगदी लांब किंवा सर्वात गुंतागुंतीच्या कागदपत्रांमध्ये द्रुतपणे नेव्हिगेट करण्यात मदत करू शकते.
जाहिरात