PS-WNAP-7350_v3.0

Product Specification of WNAP-7350

Product Specification

802.11a/n Wireless Outdoor Access Point

WNAP-7350

This document contains confidential proprietary information and is property of PLANET. The contents of this document should not be disclosed to unauthorized persons without the written consent of PLANET .

Change History:

Revision Date List

Version 1.0

Version 2.0

2012-08-15

2012-11-26

Miki Chou Initial release

Miki Chou 1. Remove WAN port passive PoE out

2. Add IEEE 802.3at supported

Version 3.0 2013-08-14 Miki Chou Swap the location of antenna connectors and RJ-45 ports

Author Miki

Approved by: Tom

Editor: Miki

Project Leader: Kent

Confidential

1. PRODUCT DESCRIPTION


PLANET Technology Corp. provides a wireless solution that higher transmission speed, higher power, better performance designed for outdoor wireless application, the Wireless Outdoor Access Point (WNAP-7350).

Faster Speed and Widely Range

Adopting IEEE 802.11n advanced MIMO technology; it provides high speed, reliable wireless network coverage, and incredible improvement in the wireless performance. As an IEEE 802.11a/n compliant wireless device, the WNAP-7350 is able to give stable and efficient wireless performance for long distance application, while designed with IEEE 802.11n standard and 2T2R MIMO technology makes it possible to deliver six times faster data rate up to 300Mbps than normal 802.11a wireless device. With its adjustable output power up to 500mW can extend the higher coverage for outdoor long range application.

Multiple Operating & Wireless Modes

It supports multiple wireless communication connectivity (AP / Client CPE / WDS PtP / WDS PtMP /

Repeater), allowing for various application requirements that gives user more comprehensive experience when using WNAP-7350. It also helps user easily to build wireless network and extend the wireless range of existed wireless network.

Advanced Wireless Security

In aspect of security, besides 64/128- bit WEP encryption, the WNAP-7350 integrates WPA / WPA2,

WPA-PSK / WPA2-PSK and 802.1x authority to secure and protect your wireless LAN. The wireless MAC filtering and SSID broadcast control to consolidate the wireless network security and prevent unauthorized wireless connection.

Perfect Solution for Outdoor Environment

The WNAP-7350 is perfectly suitable to be installed in outdoor environments and exposed locations. With its

IP67 casing protection, the WNAP-7350 can perform normally under rigorous weather conditions including heavy rain and wind.

With the standard 802.3af/at Power over Ethernet (PoE) design, the WNAP-7350 can be easily installed in the areas where power outlets are not available. It is the best way using the

Filename: PS-WNAP-7350_v3.0 Page 2 of 10 Printed on 11/1/2013


Confidential

WNAP-7350 to build outdoor wireless access applications between buildings on campuses, business, rural areas and etc.

Easy Installation & Management

With User-friendly Web UI and step by step Setup Wizard, it is easier to install, even through a user who never experiencing setup a wireless network.


Confidential

2. PRODUCT FEATURES


 Industrial Compliant Wireless LAN & LAN

 Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate

 Backward compatible with 802.11a standard

 Equipped with 10/100Mbps RJ-45 Ports for LAN & WAN, Auto MDI/ MDI-X supported

 Fixed-network Broadband Router

 Supported connection types: Dynamic IP/ Static IP/ PPPoE/ PPTP/ L2TP / IPSec

 Support Virtual Server, DMZ for various networking applications

 Support DHCP Server, UPnP, Dynamic DNS

 RF Interface Characteristics

 Built-in two N-Type Female Antenna Connectors

 High Output Power Up to 500mW with multiple adjustable transmit power control

 Outdoor Environmental Characteristics

 Aluminum Housing, IP67 Protection Grade

 IEEE Standard 802.3af/at Power Over Ethernet Design

 Multiple Operation & Wireless Mode

 Multiple Operation Modes: Bridge, Gateway, WISP

 Multiple Wireless Modes: AP, Client CPE(WISP), WDS PtP, WDS PtMP, Repeater

 Support Dual-SSID to allow users to access different networks through a single AP

 Support WMM (Wi-Fi Multimedia)

 Secure Network Connection

 Support Software Wi-Fi Protected Setup (WPS)

 Advanced security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES), and

802.1x Authentication

 Support NAT firewall features, with SPI function to protect against DoS attacks.

 Support IP / Protocol-based access control and MAC Filtering

 Easy Installation & Management

 Web-based UI and Quick Setup Wizard for easy configuration

 Remote Management allows configuration from a remote site

 SNMP-Based management interface

 System status monitoring includes DHCP Client, System Log


Confidential

3. PRODUCT SPECIFICATION

3.1 MAIN COMPONENT

RAM :

Flash :

32MB

8MB




Confidential

3.2 FUNCTIONAL SPECIFICATIONS

Product

Hardware Specifications

WNAP-7350

5GHz 300Mbps 802.11a/n Wireless Outdoor Access Point

Standard support

Chipset

Memory

Interface

IEEE 802.11a/n Wireless LAN

IEEE 802.11i Wireless Security

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Ethernet

IEEE 802.3x Flow Control

IEEE 802.3af/at Power over Ethernet / PD

Atheros AR7240

32 Mbytes DDR SDRAM

8 Mbytes Flash

Wireless IEEE 802.11a/n, 2T2R

LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX, IEEE 802.3af/at PoE/PD port

WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX

Antenna N-Type Female connectors x 2

Wireless RF Specifications

Wireless Technology

IEEE 802.11a

IEEE 802.11n

Data Rate

IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps

IEEE 802.11n (20MHz): up to 150Mbps

IEEE 802.11n (40MHz): up to 300Mbp

Media Access Control CSMA / CA

Modulation

Transmission / Emission Type: OFDM

Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM

5.180GHz ~ 5.825GHz Frequency Band

Operating Channel

5.180GHz CH36 5.580GHz CH116

5.200GHz CH40 5.600GHz CH120

5.220GHz CH44 5.620GHz CH124

5.240GHz CH48 5.640GHz CH128

5.260GHz CH52 5.660GHz CH132

5.280GHz CH56 5.680GHz CH136

5.300GHz CH60 5.700GHz CH140

5.320GHz CH64 5.745GHz CH149

5.500GHz CH100 5.765GHz CH153

5.520GHz CH104 5.785GHz CH157

5.540GHz CH108 5.805GHz CH161

5.560GHz CH112 5.825GHz CH165

*The above 24 channels are defined in theory. The actual application will vary



Confidential

RF Output Power

Receiver Sensitivity depends on the regulation in different regions and countries.

IEEE 802.11a: 27 ± 1dBm

IEEE 802.11n: 24 ± 1dBm

IEEE 802.11a: -91dBm

IEEE 802.11n: -92dBm

Output Power Control 3~27dBm

Software Features

LAN Built-in DHCP server supporting static IP address distributing

WAN

Operating Mode

Firewall

Supports 802.1d STP (Spanning Tree)

 Static IP

 Dynamic IP

 PPPoE

 PPTP

 L2TP

 IPSec

 Bridge

 Gateway

 WISP

NAT firewall with SPI (Stateful Packet Inspection)

Wireless Mode

Channel Width

Built-in NAT server supporting Virtual Server and DMZ

Built-in firewall with Port / IP address / MAC / URL filtering

 AP

 Client

 WDS PTP

 WDS PTMP

 WDS Repeater (AP+WDS)

20MHz / 40MHz

Wireless Isolation

Enable it to isolate each connected wireless clients from communicating with each other mutually.

64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X Encryption Type

Wireless Security Provides wireless LAN ACL (Access Control List) filtering

Wireless MAC address filtering

Supports WPS (WIFI Protected Setup )

Enable / Disable SSID Broadcast

Multiple SSID Up to 2

Max. Wireless Client 40

Max. WDS AP 8

Max. Wired Client 60

WMM

QoS

NTP

Supports Wi-Fi Multimedia

Supports Quality of Service for bandwidth control

Network Time Management



Confidential

Management

Diagnostic tool

Mechanical & Power

IP Rate

Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP

System Log, Ping Watchdog

Material

Installation

Power Requirements

IP67

Aluminum

Dimension (W x D x H) 320 x 27.5 x 320 mm

Weight 2.4kg

Pole mounting or Wall mounting

AP: IEEE 802.3af/at PoE / 48VDC input (PoE Injector included)

PoE Injector: 100~240VAC

Power Consumption 7.68W

Environment & Certification

Operation Temperature -30~75 Degree C

Operating Humidity 10~95% non-condensing

Regulatory

Accessory

CE / RoHS

Standard Accessories

 48VDC 802.3af PoE injector & Power cord x 1

 Mounting Kit x 1

 Waterproof RJ-45 Connector Kit x 2

 Quick Installation Guide x 1

 CD (User’s Manual, Quick Installation Guide) x 1

3.3 Physical Specification

Dimensions

27.5 x 320 x 320mm (D x W x H)

Weight

2.4kg


Confidential

Appearance


Bottom Panel – Port & Connector



Confidential

Port & Connector definition

Object

LAN (802.3af/at PoE)

N-Type (F)

WAN/LAN

Description

10/100Mbps RJ-45 port , Auto MDI/ MDI-X & 802.3af/at PoE supported

Connect LAN port to the PoE injector or PoE switch to power on the device.

N-Type Female Antenna Connectors.

Connect N-Type (F) Antenna Connectors with Outdoor Antenna through the N-Type (Male) to N-Type (Male) RF cable.

10/100Mbps RJ-45 port , Auto MDI/ MDI-X & Passive PoE supported.

Connect this port to the xDSL modem in router mode.

Connect this port to the network equipment in bridge mode.

3.4 Environmental Specification

Operating

Temperature: - 30°C ~ 75°C

Relative Humidity: 10 % ~ 95 % non-condensing

3.5 BASIC PACKAGING

 PoE injector & Power cord x 1

 Mounting Kit x 1

 Water Proof RJ-45 Connector Kit x 2

 Quick Installation Guide x 1

 CD (User’s Manual, Quick Installation Guide) x 1

3.6 PACKAGING INFORMATION

Dimension

470 x 330 x 430 mm (L x W x H)

Weight

3.4Kg (gross weight)


PS-WNAP-7350_v3.0

Product Specification

802.11a/n Wireless Outdoor Access Point

1. PRODUCT DESCRIPTION

2. PRODUCT FEATURES

3. PRODUCT SPECIFICATION

Object

Description

Related manuals

WNAP-7350

WNAP-7350

WNAP-7350

WNAP-7350

WNAP-7350

WNAP-7350

Planet

RTL8812AU-CG

WNAP-7350