advertisement
Window Systems
Sivoia QED
TM
Quiet Electronic Drive
Technical Reference Guide
230V international
|
rev C
table of contents
SYSTEM SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .
1.1
Sivoia QED™ | system design benefits . . . . . . . . . . . . 1.2
Sivoia QED™ | one system does it all . . . . . . . . . . . . . 1.2
Sivoia QED™ | roller 64 system specifications . . . . . . . 1.3
Sivoia QED™ | roller 100 system specifications . . . . . . 1.4
Sivoia QED™ | wiring using power panels . . . . . . . . . . 1.5
power panel wiring | detail . . . . . . . . . . . . . . . . . . . . .
1.6
Sivoia QED™ | wiring using individual transformers . . . 1.7
COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1
Sivoia QED™ | electronic drive unit (EDU) . . . . . . . . . . 2.2
roller 64 | system components . . . . . . . . . . . . . . . . . .
2.3
roller 64 | brackets . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4
roller 64 | specification . . . . . . . . . . . . . . . . . . . . . . . .
2.5
roller 64 | finishing options . . . . . . . . . . . . . . . . . . . . .
2.6
roller 100 | system components . . . . . . . . . . . . . . . . .
2.7
roller 100 | bracket configurations . . . . . . . . . . . . . . . .
2.8
roller 100 | bracket features . . . . . . . . . . . . . . . . . . . . 2.10
roller 100 | in-line coupled roller blinds . . . . . . . . . . . . 2.12
Sivoia QED™ keypads | available button layouts . . . . . 2.13
Sivoia QED™ | keypad accessories . . . . . . . . . . . . . . . 2.16
Sivoia QED™ | handheld infrared remotes . . . . . . . . . . 2.17
Sivoia QED™ | integration to Lutron lighting controls . . 2.18
accessories | optional infrared receivers . . . . . . . . . . . 2.19
Sivoia QED™ | power panel SVQ-10-PNL-230 . . . . . . 2.20
Sivoia QED™ | plug in transformers . . . . . . . . . . . . . . 2.21
INTEGRATION WITH LIGHTING CONTROL SYSTEMS . . .
3.1
GRAFIK Eye
®
| general system diagram . . . . . . . . . . . .
3.2
GRAFIK
®
3000/4000 | system maximums . . . . . . . . . .
3.3
HomeWorks
®
| integration overview . . . . . . . . . . . . . . .
3.6
HomeWorks
®
| system maximums . . . . . . . . . . . . . . . .
3.7
HomeWorks
®
| wiring detail . . . . . . . . . . . . . . . . . . . . .
3.8
CURTAIN TRACK SYSTEMS . . . . . . . . . . . . . . . . . . . . .
4.1
introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2
straight track configurations . . . . . . . . . . . . . . . . . . . .
4.2
system components . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4
system dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.5
Sivoia QED™ | curtain track capacity . . . . . . . . . . . . . 4.6
maximum capacities for straight tracks . . . . . . . . . . . .
4.6
hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.7
measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11
hanging curtain fabric . . . . . . . . . . . . . . . . . . . . . . . . . 4.12
wiring (identical to other Sivoia QED™ systems) . . . . . 4.13
application examples . . . . . . . . . . . . . . . . . . . . . . . . . 4.14
application examples – centre-draw . . . . . . . . . . . . . . 4.15
Sivoia QED
TM
Quiet Electronic Drive Window System Technical Support :
+44-(0)20-7702-0657
Sivoia QED
TM
system specifications
Sivoia QED
TM
Quiet Electronic Drive Window System 1.1
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
system design benefits
Sivoia QED (Quiet Electronic Drive), a low-voltage system, utilises a nearly silent electronic drive unit (EDU). The control options for Sivoia QED include various styles of intuitive wall-mounted keypads and handheld remote controls to suit any need.
Simple System Design: Sivoia QED blinds or curtains can be grouped together without the use of external "group controls".
Ultra Quiet Operation: Blinds move as quietly as the whisper of a gentle breeze. They are sound-rated at 44 dBA at 1 m (3 ft).
Maximise Window Coverage: Sivoia QED provides the smallest possible light gaps between the fabric and the window frame.
Precise Movement: Blinds move smoothly, in perfect unison, and with exact alignment.
Intuitive Control Design: Easy-to-Read and Easy-to-Use controls are immediately understood.
Convenience: Simplify your life by touching one button to open or close multiple, tall, and hard-to-reach blinds.
Programmable Presets: The Sivoia QED electronic drive unit (EDU) optimises blind and curtain adjustment by offering programmable stop points. The EDU will track the position of the blind or curtain and recall a preset level at the touch of a button.
Reliability: Lutron Electronics has been the world leader in the lighting control industry and the designer’s choice for over 40 years.
Sivoia QED
™
|
one system does it all
Sivoia QED
TM
Quiet Electronic Drive Window System 1.2
Sivoia QED technology seamlessly integrates roller blinds and curtains into one intelligent control system.
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
roller 64 system specifications
System Maximums
Devices
Presets
Group Controllers
Infrared control
System Dimensions
Tube Diameter
Roller Blind Maximum Weight
Roller Blind Minimum Weight
Minimum Roller Blind Width
Maximum Roller Blind Width
Light Gaps
Electronic Drive Unit Details
Sound Rating
Ambient Temperature
Maximum Torque
Rotational Speed
Minimum Brake Torque
Maximum Duty Cycle
Power Failure Memory
Power Supply
Input Voltage to Transformer
Output Voltage from Transformer
Maximum Current Consumption
Wiring Specifications
Communications Link
Power Supply to Electronic Drive Unit
Warranty
8 year limited warranty
96 devices (includes electronic drive units (EDUs), keypads and/or contact closure input interfaces) accuracy to within +/- 1.5mm (1/16”)
None – Groups are created electronically and do not require the use of an external group controller.
Optional infrared remote controls
41mm
5.6 kg (including hembar)
2 kg (including hembar)
560mm
2.44m
less than 20mm on each side; always symmetrical
44dBA at 1m
-10°C to 40°C
1.13 Nm
43 RPM
4 Nm
30% (electronically limited)
10 years
220/240 VAC 50/60Hz
24VAC 50/60Hz
0.45A for a 100 VA transformer
4 conductor, 2 twisted pair, shielded 1.0 mm 2
3 conductor cable for power from transformer to the EDU
1.5-0.75mm2
Sivoia QED
TM
Quiet Electronic Drive Window System 1.3
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
roller 100 system specifications
System Maximums
Devices
Presets
Group Controllers
Infrared control
System Dimensions
Tube Diameter
Roller Blind Maximum Weight
Roller Blind Minimum Weight
Minimum Roller Blind Width
Light Gaps
96 devices (includes electronic drive units (EDUs), keypads and/or contact closure input interfaces) accuracy to within +/- 1.5mm (1/16”)
None – Groups are created electronically and do not require the use of an external group controller.
Optional infrared remote controls
Electronic Drive Unit Details
Sound Rating
Ambient Temperature
Maximum Torque
Rotational Speed
Nominal Brake Torque
Maximum Duty Cycle
Power Failure Memory
44dBA at 1m
-10°C to 40°C
2.8Nm
26.7RPM
17 Nm
30% (electronically limited)
10 years
Power Supply
Input Voltage to Transformer
Output Voltage from Transformer
Maximum Current Consumption
Wiring Specifications
Communications Link
Power Supply to Electronic Drive Unit
220/240 VAC 50/60Hz
24VAC 50/60Hz
0.45A for a 100 VA transformer
4 conductor, 2 twisted pair, shielded 1.0 mm 2
3 conductor cable for power from transformer to the EDU
1.5-0.75mm2
See p. 1.4 of wiring and programming guide for complete specifications.
Warranty
8 years limited warranty
66mm
8.6kg (including hembar)
2 kg (including hembar)
610mm less than 20mm on each side; always symmetrical
Sivoia QED
TM
Quiet Electronic Drive Window System 1.4
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
wiring using power panels
Sivoia QED EDU
.75
.75
Optional
IR Receiver to additional
Sivoia QED
EDUs
C
230Volt feed
Sivoia QED EDU
.75
to additional
Sivoia QED
EDUs
C
230 Volt feed to Lutron lighting control system to other Sivoia
QED keypads
C
SG-SVC
SO-SVC
(Integration to Lutron lighting control systems)
SVQ-10-PNL-230
A
1 2 3 4
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
SVQ-CCI-8
A
Sivoia QED
Euro style keypads
A Communications Link
A
SVQ-10-PNL-230
Sivoia QED communications link to other
SVQ-10-PNL-230 panels
4 Conductors
B Power Wires 3 Conductors
C Comm/Power Combination 7 Conductors
SVQ-CBL-250
Sivoia QED
TM
Quiet Electronic Drive Window System 1.5
Technical Support :
+44-(0)20-7702-0657
power panel wiring
|
detail
Note:
All internal components of the
Sivoia QED Power Panel are pre-wired at the factory.
230VAC wiring entry from distribution panel
Custom seven-conductor combination communications/power cable (SVQ-CBL-250), can be used to simplify wiring.
Wire up to 10 Sivoia QED
EDUs per panel.
.75
.75
.75
.75
.75
.75
Sivoia QED
TM
LED indicators power at terminal block
(Maximum current draw of 4A per panel).
Note: Power panel must be properly earth-grounded.
Quiet Electronic Drive Window System 1.6
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
wiring using individual transformers
Sivoia QED roller blind
24 V~ power supplies, each powers one
Sivoia QED EDU.
B
.75
.75
24 V~
Power
Supply
European style keypads to control EDUs
A
Sivoia QED roller blind
B
.75
.75
A
Sivoia QED roller blind
B
A
.75
.75
24 V~
Power
Supply
24 V~
Power
Supply
To next keypad or contact closure interface or EDU
All components on one communications link.
1 2 3 4
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
SVQ-CCI-8 contact closure inputs to communicate with outside systems
Notes:
•
A
total of 96 devices, which include EDUs, keypads, and/or CCIs, can operate simultaneously on the Sivoia
QED Link.
•
When the number of keypads and CCIs in an installation exceeds the number of Sivoia QED EDUs, external keypad power supplies would be required.
A Communications Link
B Power Wires
4 Conductors
3 Conductors
Sivoia QED
TM
Quiet Electronic Drive Window System 1.7
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
TM
components
Sivoia QED
TM
Quiet Electronic Drive Window System 2.1
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
electronic drive unit (EDU)
The EDU is the brain of the Sivoia QED system. It controls the movement of the roller blind, keeps track of the blind’s position, and adjusts it to the programmed positions as selected by the user.
There are two models of EDU, the EDU 30 (for roller
100) and the EDU 10 (for roller 64). The EDU 10 offers a slimmer profile, fitting a 41mm diameter roller tube.
Both EDUs feature identical wiring and programming.
Electronic Drive Features and Benefits:
•
Ultra-Quiet operation: will not exceed 44 dBA measured
1 m (3 ft) from the EDU
•
Smooth, silent starts and stops
•
Seamless integration with Lutron lighting control systems and other a/v equipment
•
Integrates with most outside systems such as home security or time clocks, without the use of external group controls or relay systems
•
Preset controls
•
Ten year power failure memory
•
Monitors blind position at all times
•
24 V~ low-voltage power allows Sivoia QED to be installed by low-voltage contractors
•
Blinds smoothly move in unison and stop in exact alignment within ± 1.5 mm (1/16 in) accuracy
•
Optional infrared system provides easy, convenient control from anywhere in the room
EDU 64
EDU 100
Sivoia QED
TM
Quiet Electronic Drive Window System 2.2
Technical Support :
+44-(0)20-7702-0657
roller 64
|
system components
Exploded view
roller tube
(diameter 41mm) universal bracket idler universal bracket (wall, ceiling & jamb mount) terminal block electronic drive unit
Open OPEN
CLOSE
LUTRON
seeTouch
TM
Keypads Infrared Remotes Power and
Communications Panel
European
Style Keypads
Note: not to scale.
Sivoia QED
TM
Quiet Electronic Drive Window System 2.3
1 2 3 4
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
Contact Closure
Input Boards
Technical Support :
+44-(0)20-7702-0657
roller 64
|
brackets
•
•
•
•
universal bracket design
one-piece bracket for simple installation same bracket for left and right side of roller tube one bracket for ceiling, wall and jamb installation roller tube installs with simple, spring-loaded design projection adjustment
(using spacers) vertical adjustment
84mm (3.3”) maximum roll width projection from wall
space requirements
The roller 64 system installs in a space 89mm
(3.5”) deep x 89mm (3.5”) high. The roll width shown above illustrates a full 6m2 (64 square foot) panel of the fabric 0.94mm (.037”) thick.
horizontal adjustment
blind adjustment
During installation, each side of the blind can be adjusted both horizontally and vertically as well as in its projection off the wall (using spacers provided).
Sivoia QED
TM
Quiet Electronic Drive Window System 2.4
Technical Support :
+44-(0)20-7702-0657
roller 64
|
specification
System dimensions
|
roller 64
The roller 64 utilises a 41mm roller tube to operate up to 5.6m2 of fabric.
Front view
Top view
Pocket dimensions
Sivoia QED
TM roller 64 will never require more than
89mm height or 89mm depth for installation.
Dimensions
19mm (.75”)
76mm (3”) maximum
84mm (3.3”) maximum
55mm (2.175”)
41mm (1.67”)
8mm (.3”)
89mm (3.5”)
Sivoia QED
TM
Quiet Electronic Drive Window System 2.5
•
•
•
•
•
•
•
•
•
•
•
•
Specifications
Low-voltage operation (24V ˜ )
Ultra-quiet drive (44dBA at 1m)
Roller tube size: 41mm diameter
Minimum tube width: 560mm
Maximum tube width: 2.44m
Maximum fabric size: 5.6m2
Installs with Sivoia QED universal one-piece bracket (jamb, ceiling or wall mount)
Bracket adjustments at three directions
Light gaps: 19mm on both sides
Intelligent Hembar AlignmentTM: uniform movement and tracking with other Sivoia QED blind systems (within ± 2mm)
Elegant keypads and optional hand-held infrared remotes
Integration capability with Lutron lighting control systems (HomeWorks
® and
GRAFIK Eye
TM
)
Technical Support :
+44-(0)20-7702-0657
roller 64
|
finishing options
curved fascia
In addition to the square pocket shown on page 1. Sivoia QED roller 64 can also be installed using a curved fascia for a minimal appearance in the window.
roller tube end caps
Provide a clean look for a system installed without fascia or pocket. Available in white only.
square fascia end caps
Finished the look of the Sivoia QED roller 64 standard headbox.
dual-mounted roller blinds
Dimensions
89mm (3.5”)
152mm (6.0”) (minimum)
99mm (3.9”)
159mm (6.25”)
178mm (7.0”)
83.82mm (3.3”) (minimum)
Quiet Electronic Drive Window System 2.6
curved fascia end cap
A sleek, unobstructive look for Sivoia QED roller 64.
Technical Support :
+44-(0)20-7702-0657
roller 100
|
system components
exploded view of wall mount system wall mount bracket terminal block wall mount bracket idler and components idler roller tube diameter electronic drive unit sub-bracket sub-bracket
1 2 3 4
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
Open
OPEN
CLOSE
Power and
Communications Panel available in 120v and
230v configurations
European
Style Keypads
Note: not to scale.
Sivoia QED
TM
Quiet Electronic Drive Window System
LUTRON
seeTouch
TM
2.7
Keypads Infrared Remotes Contact Closure
Input Boards
Technical Support :
+44-(0)20-7702-0657
roller 100
|
bracket configurations
•
Two-piece bracket design provides flexibility to adjust blind symmetry over window opening without removing the blind.
•
The EDU mounts inside the left or right side of the roller tube to accommodate different wiring needs.
•
The two-piece bracket affords lateral adjustment, leveling adjustment and projection adjustment both during and after installation without removing the roller tube.
Wall-mount Configuration Ceiling-mount Configuration
Jamb/Recess Configuration
Sivoia QED
TM
Quiet Electronic Drive Window System 2.8
Dual-mount Configuration
Technical Support :
+44-(0)20-7702-0657
roller 100
|
bracket configurations
109 mm
(4.3 in)
127 mm
(5.0 in)
102 mm
(4.0 in)
84 mm
(3.307 in)
4 mm
(0.165 in)
132 mm
(5.20 in)
111 mm
(4.387 in) fabric projection adjustable from 30 – 43 mm (1.2 –
1.7 in) note: shown as regular roll
Wall-mount Configuration
130 mm (5.125 in)
113 mm (4.44 in)
Ceiling-mount Configuration
178 mm
(7.0 in)
119 mm
(4.69 in)
Jamb/Recess Configuration
Sivoia QED
TM
Quiet Electronic Drive Window System 2.9
box not provided flap and hanger
25 mm
(1.0 in)
Dual-mount Configuration
279 mm
(11.0 in) glass
Technical Support :
+44-(0)20-7702-0657
roller 100
|
bracket features
Two-Piece Bracket
System Considerations
The sub-bracket mounts to the wall or ceiling before the main unit is installed. The measurements below indicate how to install the sub-bracket. If you know either the system width (bracket-to bracket width) or the fabric width, you can mount the sub-brackets.
19 mm
(0.75 in)
51 mm (2.0 in)
76 mm (3.0 in)
19 mm (0.75 in)
System Width
Fabric Width
51 mm (2.0 in)
19 mm
(0.75 in)
76 mm (3.0 in)
19 mm (0.75 in) wall brackets shown
19 mm
(0.75 in) system edge fabric edge fabric edge indicator wall bracket detail
Sivoia QED
TM
Quiet Electronic Drive Window System 2.10
Technical Support :
+44-(0)20-7702-0657
roller 100
|
bracket features
Two-Piece Bracket
Lutron has designed a bracket system to maximise ease and flexibility of installation. The installer mounts a subbracket to the wall, ceiling or jamb.
Roller Tube Leveling
The innovative Sivoia QED idler bracket contains a set screw, which can be adjusted to raise and lower the idler side of the roller within the bracket, allowing the blind to be leveled easily without removing and re-mounting the bracket.
sub-bracket main bracket leveling adjustment screw
± 9.5 mm (3/8 in)
Blind Centring
The bracket allows for adjustment of 9.5 mm (3/8 in) in either direction and locks in place with the set screw.
Projection Adjustment
The roller tube can also be adjusted away from or toward the wall, without having to be re-mounted. This helps ensure the blind clears any window hardware or trim. The bracket allows the tube to be adjusted up to
13 mm (1/2 in) forward or backward and is again secured with a set screw.
adjust roller tube laterally to centre blind
± 9.5 mm (3/8 in)
± 13 mm (1/2 in) projection adjustment
Sivoia QED
TM
Quiet Electronic Drive Window System 2.11
Technical Support :
+44-(0)20-7702-0657
roller 100
|
in-line coupled roller blinds
Coupled blinds may provide a means to reduce the total installed cost of the Sivoia QED system. The number of
EDUs on a job may be reduced where independent control of adjacent blinds is not needed. With a reduction in the number of EDUs there will be an equal reduction in power supplies and wiring. This may also simplify the programming and setup of the job.
In an in-line coupled system, one EDU is lifting up to three fabric panels. The EDU can lift approximately 10 m
2
(100 ft
2
) of fabric. For a specific application, please consult your local Lutron fabricator.
With the in-line coupled system, up to three blind panels can be operated from a single EDU. A coupling pin provides for phase adjustment that allows the installer to adjust the hembar alignment after installation and without removing the fabric panels from the tube.
Likewise, the in-line coupled system provides the same leveling, blind centring, and projection adjustment that is provided on the single roller Sivoia QED blind. Also, inline coupling is supported for all three mounting conditions: wall, ceiling, and jamb/recess. Fabric gaps are shown in the illustration below.
System Width
19 mm (3/4 in)
38 mm (1.5 in)
Fabric Width
System Width
38 mm (1.5 in)
Fabric Width
System Width
19 mm (3/4 in)
Fabric Width
Sivoia QED
TM
Quiet Electronic Drive Window System 2.12
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
keypads
|
available button layouts
EUROPEAN STYLE
Choose from five keypad styles for
Sivoia QED.
Functionality includes:
1. full open/full close
2. raise/lower fine-tuning
3. movement to programmable preset positions
4. selection of groups of EDUs for increased functionality
5. infrared reception
6. “stop if moving” from any button
Dimensions: width: 86mm height: 86mm depth (with backbox): 21mm
SQE-2N:
Two button keypad with full open/full close
1
2
3
SQE-RLN:
keypad with fine-tune raise/lower and automatic full open or close with a four-second button press
SQE-3EN:
keypad with open/ preset/close, raise/lower and infrared reception
SQE-3DN:
keypad with open/ preset/close for dualmounted or two group applications
SQE-33N:
keypad with open/ preset/close, raise/lower for three group applications
Sivoia QED
TM
Quiet Electronic Drive Window System 2.13
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
keypads
|
available button layouts
SeeTouch
TM keypads
This exclusive Lutron design offers backlit, ergonomic buttons, customeized engraving and complements any décor.
Architectural
• available in insert and non-insert models
• sharp outside corners and beveled outside edges
• available in matt plastic and metal finishes
Dimensions: width: 69.85mm (2.75”) height: 117.48mm (4.625”) depth: 28.70mm (1.13”) insert version non-insert version
SVQ-2WRL:
Two button keypad with raise/lower
SVQ-3WRL:
Three button keypad with raise/lower
SVQ-3W:
Three button keypad
SVQ-2W:
Two button keypad
Sivoia QED
TM
Quiet Electronic Drive Window System 2.14
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
keypads
|
available button layouts
SVQ-4WRL-IR:
Four button keypad with raise/lower and infrared reception
SVQ-5WRL:
Five button keypad with raise/lower
SVQ-2WD:
Four button keypad for dual-mount or two group applications
Sivoia QED
TM
Quiet Electronic Drive Window System 2.15
SVQ-3WD:
Six button keypad for dual-mount or two group applications
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
keypad accessories
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
COMMON
INPUT
Dimensions for
Enclosure
W: 133 mm (5.25 in)
(146 mm (5.75 in) with cover)
H: 260 mm (10.25 in)
(273 mm (10.75 in) with cover)
D: 51 mm (2.0 in)
1 2 3 4
SVQ-CCI-8
• Performs similar functions to keypads - receives eight contact closure inputs and sets presets, programs
EDUs, etc
•
Access user-programmable presets/scenes or stop
•
Utilises low-voltage, dry contact closure inputs to interface with non-Lutron A/V equipment
•
LEDs provide feedback
•
Receives IR commands
•
Receives power and communication on 4-wire Sivoia
QED communication bus
•
Ships in enclosure, ready for installation
•
See pg. 2.44 of the Sivoia QED Wiring and
Programming Guide (p/n 045-101-12 rev A) for information on how to access multiple groups of EDUs from a CCI
•
Terminal blocks accommodate 1.5-0.5mm
2
(14-22AWG) wire
Sivoia QED
TM
Quiet Electronic Drive Window System 2.16
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
handheld infrared remotes
Convenient hand-held remotes to send infrared control signals to receivers either built into keypads or mounted directly at the electronic drive unit. All remotes available in white only.
SVQ-OCIT:
Open/Close Handheld
IR Transmitter
SVQ-3PIT:
Three Preset Handheld
IR Transmitter
OPEN
CLOSE
SHADE
Both
SVQ-4GD-OCIT:
Multi-function
Handheld Infrared
Transmitter
WINDOW
1 2 All
3 4
SHADES
OPEN
CLOSE
1
3
SHADES
1
2
LIGHTS
2
4
Both
Off
SVQ-4S2G-IT:
Multi-function Lights and Window Treatment
Handheld Infrared
Transmitter
Sivoia QED
TM
Quiet Electronic Drive Window System 2.17
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
integration to Lutron lighting controls
Integration Accessories
HWI-Q96
SOLos
TM
Integrator
Coopersburg, PA 18036 USA
For use with Lutron HomeWorks and Sivoia QED systems only.
PELV (CLASS 2: USA)
To HomeWorks
Processor H48
Link
1 2 3 4
HWI-Q96 HomeWorks
Address Settings
ON
1
ON
1 2 3 4 5 6
2
ON
1 2 3 4 5 6
3
1 2 3 4 5 6
4
ON
1 2 3 4 5 6
To Sivoia QED
Communication
Link
1 2 3 4
HWI-Q96:
HomeWorks
®
control for
Sivoia QED
Features
•
Provides two-way communication between HomeWorks and Sivoia QED systems
•
Compatible with 4 series and 8 series HomeWorks processors
•
A low-voltage component that can be placed in any
HomeWorks HWI-LV-17, HWI-LV-24, or HWI-LV-32 enclosures
•
Operate all EDUs, groups of EDUs, or single EDUs from
HomeWorks Keypads or RS-232 port on HWI processor
Dimensions
W: 79 mm (3.125 in)
H: 142 mm (5.60 in)
D: 51 mm (2.00 in)
Open
SG-SVC:
SO-SVC
GRAFIK
®
Systems
Control for
Sivoia QED
•
Provides communication between GRAFIK 3000 or
GRAFIK 4000 Sivoia QED system (SG-SVC) and Grafik
5000, 6000, and 7000 systems (SO-SVC).
•
Allow one zone on the GRAFIK Eye main unit for each
SG-SVC or SO-SVC.
•
Does not occupy a GRX main unit address or accessory control address
•
Operates all Sivoia QED EDUs on the communication link
•
Mounts in Lutron supplied wallbox
Product Dimensions
W: 70 mm (2.75 in)
H: 117 mm (4.625 in)
D: 29 mm (1.13 in)
Sivoia QED
TM
Quiet Electronic Drive Window System 2.18
Technical Support :
+44-(0)20-7702-0657
accessories
|
optional infrared receivers
Remote IR Eye
Lutron offers a remote infrared eye for Sivoia QED. It is a small dome connected to the EDU by a thin 560 mm (22 in) cable. Extensions of 3 m (10 ft) lengths are available if the layout requires the IR eye to be located further from the
EDU. Unobtrusive mounting clips and adhesive tape are also provided.
Use only one IR receiver per room.
Remote IR Eye
(not shown to scale, has a diameter of
25 mm (1.0 in))
SV-IR
Infrared remote eye, available in white and royal plum
SV-IR connects to optional extension cable (SV-IR-EXT-10) or directly to EDU
Sivoia QED
TM
Quiet Electronic Drive Window System 2.19
3 m (10 ft)
SV-IR-EXT-10
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
power panel SVQ-10-PNL-230
Sivoia QED power panels simplify the wiring and organise installations that require multiple transformers.
The power panel consists of a 10 output transformer, 10 fuses (one per output) and a wire landing board.
Each panel has 10-7 pin connectors for EDUs. Each connector is supplied with power for an EDU. The panel contains a bus that connects the four communication link wires from each EDU together. It is recommended to home-run both EDU and keypad wiring to the power panel. The panel accommodates home run wiring with seven-pin EDU connectors for up to ten EDUs.
Note: Maximum feed breaker size of 30 Amps. Each terminal block will accept one 0.75-6mm
2 wire.
Please see the Wiring and Programming Guide (p/n
045-101-12a) for specific gauges and limitations.
Power panels must be grounded for safe operation and installed by a licensed electrician adhering to all local and national codes.
Note: The SVQ-10-PNL-230 internally connects the four communications wires landed at each of the seven-pin connectors.
Maximum current draw is 4A per panel. Maximum of two power panels per 10amp breaker.
24.13 cm
26.16 cm
9.91 cm
44.45 cm
Note: also available in 120v.
Sivoia QED
TM
Quiet Electronic Drive Window System 2.20
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
plug in transformers
89 mm
120 mm
Dimensions for plug in transformer
W: 75 mm (2.95 in)
H: 85 mm (3.35 in)
D: 120 mm (4.73 in)
75 mm
UK VERSION
Plug in transformer
• Input Voltage: 230-240V, 50Hz
•
Output voltage: nominal 24v AC RMS,
100 VA maximum
•
Three prong Schuko style plug
•
Contact customer service for more information
89 mm
75 mm
120 mm
Dimensions for plug in transformer
W: 75 mm (2.95 in)
H: 85 mm (3.35 in)
D: 120 mm (4.73 in)
EU VERSION
Plug in transformer
•
Input Voltage: 230-240V, 50Hz
•
Output voltage: nominal 24v AC RMS,
100 VA maximum
•
Two prong European style plug
•
Contact customer service for more information
Sivoia QED
TM
Quiet Electronic Drive Window System 2.21
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
TM
integration with Lutron lighting control systems
Sivoia QED
TM
Quiet Electronic Drive Window System 3.1
Technical Support :
+44-(0)20-7702-0657
GRAFIK Eye
®
|
general system diagram
System wiring is shown with two GRAFIK Eye Sivoia QED interfaces (SG-SVC) to provide control of two groups of
Sivoia QED EDUs independently.
A to lighting loads
GRAFIK Eye wall station
GRX350X-X-XX-CPN1622
EGRX-4S-IR
C
SG-SVC keypads
B
24 V~
Power
Supply
24 V~
Power
AC
GRD
Supply
AC
A
B
C
GRAFIK Communications Link
Sivoia QED Communication Link
Power Wiring
4 conductors
4 conductors
3 conductors
24 V~
Power
Supply
Sivoia QED
TM
Quiet Electronic Drive Window System 3.2
24 V~
Power
AC
GRD
Supply
AC
Technical Support :
+44-(0)20-7702-0657
GRAFIK
®
3000/4000
|
system maximums
Control units
Zones per control unit
Total zones per system
GRX 3000
the Grafik Eye
16
8
SG-SVC
96
GRX 4000
8
6
8
24
48 64
A Grafik Eye Sivoia QED interface uses 1 zone within
Wall Stations
Window System interfaces
For Sivoia QED, use the Sivoia QED interfaces
Maximum EDUs per Sivoia QED interface
Sivoia QED window systems interface for Grafik Eye
Interface for Sivoia QED SG-SVC is addressed manually
Addressing Grafik Eye and Grafik Eye wallstations are addressed manually
Low Voltage Wiring
Wiring configurations
Sivoia QED components are addressed in Sivoia QED programming mode automatically
See page 3.2
Grafik Eye Link – Daisy Chain
Setting Limits
Power
Sivoia QED Link – T-tap, daisy chain, home-run
Limits can be set from the EDU, a Sivoia QED keypad or a Sivoia QED handheld infrared remote control
The SG-SVC is powered by the 24V~ Sivoia QED power supply
Sivoia QED Controllability from Grafik Eye 3000
Scene Control
A Grafik Eye wall station selects scenes on a control unit.
For each Grafik Eye scene, a lighting zone can be programmed from 0-100% and as unaffected. A
Sivoia QED zone can be programmed as:
• Open
• Preset 1
• Preset 2
• Preset 3
• Close
• Unaffected
Zone Control
A Grafik Eye window treatment wall station provides an additional point of control for a single EDU or group of
EDUs connected to a SG-SVC interface, without affecting the lighting scenes. A Sivoia QED zone can be adjusted as:
• Open
• Preset 1
• Preset 2
• Preset 3
• Close
• Stop
• Raise/Lower
Sivoia QED
TM
Quiet Electronic Drive Window System 3.3
Technical Support :
+44-(0)20-7702-0657
GRAFIK
®
3000/4000
|
system maximums
C
D
A
B
GRAFIK power link
GRAFIK Communications link
Sivoia QED communication link
Sivoia QED power wiring
3 conductors
4 conductors
4 conductors
3 conductors
230V
DISTRIBUTION
PANEL
To other
Grafik Eye keypads
A
4 MUX
3 MUX
2 +V
1 COM
ZONE 2
ZONE 4
ZONE 6
CU WIRE ONLY
HOT/LIVE
SSA
Class 2
1 2 3 4
USA
CLASS 2
IEC
PELV
ZONE 1
ZONE 3
ZONE 5
NEUTRAL
GRX-310X-CE-XX
B to dimmed lighting loads
Sivoia QED
EDU Terminal Block
MUX
COM
MUX
AC
AC
SG-SVC (Back)
C
24 V~ Power
Supply
D to next
EDU or keypad
D
Sivoia QED
TM
Quiet Electronic Drive Window System 3.4
Technical Support :
+44-(0)20-7702-0657
GRAFIK
®
3000/4000
|
system maximums
Grafik Eye Main Units
Maximum 8
GRX-3102
GRX-3103
GRX-3104
GRX-3106
GRX-3502
GRX-3503
GRX-3504
GRX-3506
Grafik Integrale currently does support window treatment interfaces
Grafik Eye Accessory
Controls
Grafik Eye Window Treatment
Interfaces
Maximum 16 wall stations, interfaces and/or window treatment controls
Maximum 8
Wall Stations
NTGRX-4S
EGRX-4S
SG-4SN
See Grafik Eye catalogue for complete listing
Sivoia QED interface
SG-SVC
GRAFIK Eye AC Group
Controllers
GRX-4M-GC-CE
Interfaces
GRX-PRG
GRX-CI-NWK-E
GRX-CCO-8 (when addressed for AV or other contact closure equipment)
See Grafik Eye catalogue for complete listing
GRAFIK Eye contact closure output
GRX-CCO-8
Window Treatment
Wall Stations
SG-2W
SG-3W
SG-3WRL
SG-WD
SG-5WRL
Sivoia QED
TM
Quiet Electronic Drive Window System 3.5
Technical Support :
+44-(0)20-7702-0657
HomeWorks
®
|
integration overview
HomeWorks processor
C
A Communication Link 4 Conductors
B Comm/Power Combination 7 Conductors
SVQ-CBL-250
C HomeWorks Link* H48/Q96 Link
*Please refer to HomeWorks Technical Reference Guide
Addendum (p/n 366-945/EA) for full specification of this cable.
HWI-Q96
A
• Sivoia QED EDUs can be controlled directly from the HomeWorks 4 or 8 series processor using HWI-Q96 integrator.
• Control up to 96 EDUs.
• Each EDU counts as a zone on the
HomeWorks processor.
• Sivoia QED keypads may be used but count against the 96 device limit. Sivoia QED keypads cannot be programmed using the
HomeWorks processor.
B
SVQ-10-PNL-230
.75
.75
.75
.75
.75
.75
Sivoia QED EDUs
Sivoia QED
TM
Quiet Electronic Drive Window System 3.6
Technical Support :
+44-(0)20-7702-0657
HomeWorks
®
|
system maximums
System Maximums
Zones per HomeWorks Processor
Processors per system
Zones per system
EDUs per HWI-Q96 interface
HWI-Q96 interfaces per H48/Q96 Link
Link 4, 5, 6 (or 8 in 8 series only) can be configured as a H48/Q96 Link
256
Each EDU uses one zone of the HomeWorks system
16
4096
96
4 total interfaces (H48 and/or HWI-Q96)
Maximum 1 H48/Q96 link per HomeWorks processor
Sivoia QED interface for HomeWorks
Interface for Sivoia QED
Addressing
Low Voltage Wiring
Wiring configurations – HomeWorks Link
Wiring Configurations – Sivoia QED Link
Setting Limits
Power
Sivoia QED Controllability for HomeWorks
HWI-Q96
Connects to configurable link configured as an H48/Q96
Link
• Installs in any low voltage enclosure
• A second HWI-Q96 is only required when the total number of EDUs per system exceeds 96
HWI-Q96 interface addresses with dip switches
EDUs are addressed via serial addressing in the Home-
Works software
See page 3.8
Daisy chain ONLY between processor and interface – max 305m cable
Refer to HomeWorks Technical Reference Guide
Daisy chain or home-run EDUs to power panel
(maximum 305m per single run
Maximum 1220m total wire distance for Sivoia QED link
Refer to Sivoia QED Wiring and Programming Guide (p/n
045-101-12 rev A)
Limits can be set from the EDU or from the HomeWorks
Software
The HWI-Q96 is powered by the Sivoia QED link
• Lighting and Sivoia QED zones can be programmed at any level between 0% - 100%.
• For Sivoia QED, 0% equals fully closed and 100% equals fully open
• Any EDU in the system can be programmed to any
HomeWorks keypad in the system at any level
• Sivoia QED zones can be included in security mode, vacation mode and scene save programming
• Sivoia QED zones can also be controlled via RS232 and will provide system feedback to the processor
• Sivoia QED keypads may be used but count against the 96 device limit
• Sivoia QED keypads cannot be programmed using the
HomeWorks software
Sivoia QED
TM
Quiet Electronic Drive Window System 3.7
Technical Support :
+44-(0)20-7702-0657
HomeWorks
®
|
wiring detail
Sivoia QED to HomeWorks
This detail illustrates the wiring of the
Sivoia QED system to the HWI-Q96 component.
This allows HomeWorks to directly control any EDU or group of EDUs within the entire Sivoia QED system.
HomeWorks
Processor
C
HWI-Q96
A
EDU
Terminal
Block
B
Sivoia QED
TM
Quiet Electronic Drive Window System 3.8
A Communication Link
B Comm/Power Combination
SVQ-CBL-250
C HomeWorks Link
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
TM
curtain track systems
Sivoia QED
TM
Quiet Electronic Drive Window System 4.1
Technical Support :
+44-(0)20-7702-0657
introduction
• Sivoia QED curtains are designed for use with pinchpleat fabrics.
• The Sivoia QED curtain system wiring is identical to other Sivoia QED systems.
• Standard Sivoia QED controls, interfaces and power supply can be used with the Sivoia QED Curtain system.
• The Sivoia QED curtain system interfaces to Lutron and other manufacturer's equipment in the same manner as other Sivoia QED roller blind systems.
• The programming is identical to other Sivoia QED products.
• The curtain carriers can be loaded and unloaded without disassembly.
straight track configurations
• The Sivoia QED curtain system is available with straight tracks.
• Sivoia QED curtain track is available in both left and right motor configurations allowing left stack, right stack and centre-draw systems.
Left draw/ Left-Mounted EDU Right draw/ Right-Mounted EDU
Centre-draw, Left- or Right-
Mounted EDU
Sivoia QED
TM
Quiet Electronic Drive Window System 4.2
Technical Support :
+44-(0)20-7702-0657
ONE WAY DRAW
(LEFT OR RIGHT STACK AVAILABLE)
Stack Back
System Width
CENTRE DRAW
Stack Back
System Width
Stack Back
Max System Width = 5.5 m (18 ft)
Stack back = 1/3 System Width
Curtain Speed: 152 mm/sec (6 in/sec)
Max System Width: 5.5 m (18 ft) (see two-motor systems for wider widths)
Stack back = 1/6 System Width on each side (1/3 total)
Curtain Speed: 152 mm/sec (6 in/sec)
Specify the motor side when ordering a centre-open system right-draw one-way system left-draw one-way system
Sivoia QED
TM
Quiet Electronic Drive Window System 4.3
centre-draw system
Technical Support :
+44-(0)20-7702-0657
system components
EXPLODED VIEW ONE WAY DRAW
Curtain
Track Belt
Curtain
Track
Idler End Cap
EXPLODED VIEW CENTRE-DRAW
Curtain
Track Belt
Curtain
Track
Idler End Kit
End Hook
Sivoia QED
TM
Quiet Electronic Drive Window System 4.4
Gear Box
(shaded for illustrative purposes only)
Electronic Drive
Unit (EDU)
Auxiliary Cars
Pre-assembled right standard master car
Auxiliary Cars
2 Pre-assembled right standard master cars
Gear Box
(shaded for illustrative purposes only)
Electronic Drive
Unit (EDU)
Technical Support :
+44-(0)20-7702-0657
system dimensions
ONE-WAY DRAW SIDE VIEW
System Width (application-dependent 5.5 m (18 ft) max.)
RIGHT, LEFT, CENTRE-DRAW
ELECTRONIC DRIVE UNIT END VIEW
95 mm
(3.75 in)
51 mm (2.0 in)
213 mm
(8.375 in)
ONE-WAY DRAW TOP VIEW
41 mm (1.625 in)
32 mm (1.25 in)
Sivoia QED
TM
Quiet Electronic Drive Window System 4.5
51 mm
(2.0 in)
Technical Support :
+44-(0)20-7702-0657
Sivoia QED
™
|
curtain track capacity
Curtain materials and construction techniques can vary widely. The size of the curtain that can be used with the
Sivoia QED curtain track depends primarily on the total fabric weight of the curtains being used. The chart below provides some rules of thumb for track capacity based on the complete weight of a curtain (weight given includes face fabric, lining and top bottom and side hems based and is calculated based on a fullness of
2.5:1). Use this chart to quickly determine if a given curtain can be driven with the Sivoia QED curtain system.
TRACK CAPACITY CHART
Typical Sheer Curtain-
136 - 203 g/m
2
(4 - 6 oz/yd
2
)
Height
136 g/m 2 (4 oz/yd
Total fabric weight
2 )
Typical Blackout Curtain with Lining-
406 - 542 g/m
2
(12 - 16 oz/yd
2
)
406 g/m 2 (12 oz/yd
Total fabric weight
2 ) 542 g/m 2 (16 oz/yd
Total fabric weight
2 ) 813 g/m 2 (24 oz/yd
Total fabric weight
2 )
Up to 5.5 m (18 ft) wide Up to 5.5 m (18 ft) wide Up to 4.5 m (15 ft) wide Up to 3.6 m (12 ft) wide 1828 mm
(72 in) tall
2438 mm
(96 in) tall
3651 mm
(144 in) tall
Up to 5.5 m (18 ft) wide Up to 5.5 m (18 ft) wide Up to 4.5 m (15 ft) wide Up to 2.1 m (7 ft) wide
Up to 5.5 m (18 ft) wide Up to 4.2 m (14 ft) wide Up to 2.7 m (9 ft) wide N/A
maximum capacities for straight tracks
Use this chart to determine the maximum fabric weight the Sivoia QED curtain system can operate, based upon system width.
Single Motor System
Width m (ft)
Weight kg (lbs)
0.9–2.7
(3–9)
3–3.9
(10–13)
4.2–5.5
(14–18)
36.3 (80) 31.8 (70) 27.2 (60)
Two Motor Split Tandem System
Width m (ft)
1.8–5.5
(6–18)
5.8–7.9
(19–26)
8.2–11
(27–36)
72.6 (160) 63.5 (140) 54.4 (120) Weight for both panels kg (lbs)
Sivoia QED
TM
Quiet Electronic Drive Window System 4.6
Technical Support :
+44-(0)20-7702-0657
hardware
TRACK MOUNTING TO WALL
Mount the curtain track to the wall using the wall mount “L” brackets. Mount the brackets using the spacing illustrated below. Mount each end bracket 152 mm (6 in) from each end of the track. Space the next bracket on both sides
406 mm (16 in) from the end brackets. Space the remaining brackets 406–609 mm (16-24 in) apart. Mount into
studs everywhere possible. Use appropriate hardware.
152 mm
(6 in)
406 mm
(16 in)
406–609 mm
(16–24 in)
Window/Wall Side
406–609 mm
(16–24 in)
406 mm
(16 in)
152 mm
(6 in)
WALL-MOUNTED BRACKET
The wall-mounted bracket provides variable adjustment from 114–171 mm (4.50–6.75 in) from the mounting surface. Cam locking clips are used to attach the brackets to the track as shown in the assembled side view below.
Sivoia QED
TM
Quiet Electronic Drive Window System 4.7
Technical Support :
+44-(0)20-7702-0657
hardware
WALL-MOUNTED BRACKET
ASSEMBLED SIDE VIEW
70 mm
(2.75 in)
108 mm
(4.25 in)
31 mm
(1.22 in)
32 mm
(1.25 in)
108 mm
(4.25 in)
41 mm
(1.625 in)
EXTENDED BRACKET
ASSEMBLED SIDE VIEW
172 mm
(6.75 in)
31 mm
(1.22 in)
41 mm
(1.625 in)
70 mm
(2.75 in)
152 mm
(6.0 in)
Sivoia QED
TM
Quiet Electronic Drive Window System 4.8
Technical Support :
+44-(0)20-7702-0657
hardware
WALL-MOUNTED BRACKET
DUAL-MOUNT - ASSEMBLED SIDE VIEW
248 mm
(9.75” in)
31 mm
(1.22 in)
118 mm
(4.625 in)
89 mm
(3.5 in)
229 mm
(9.0 in)
WALL-MOUNTED BRACKET - EXTENDED
DUAL-MOUNT - ASSEMBLED SIDE VIEW
311 mm
(12.25 in)
31 mm
(1.22 in)
41 mm
(1.625 in)
118 mm
(4.625 in)
152 mm
(6.0 in)
292 mm
(11.5 in)
41 mm
(1.625 in)
Sivoia QED
TM
Quiet Electronic Drive Window System 4.9
Technical Support :
+44-(0)20-7702-0657
hardware
TRACK MOUNTING TO CEILING
Mount the curtain track to the ceiling using the cam lock brackets. Mount the brackets using the spacing guidelines shown below. Mount one bracket 152 mm (6 in) in from each side of the track. Space the next bracket on both sides
406 mm (16 in) from the end brackets. Space the remaining brackets 406–609 mm (16-24 in) apart. Mount into
studs everywhere possible. Use appropriate hardware.
152 mm
(6 in)
406 mm
(16 in)
406–609 mm
(16–24 in)
Window/Wall Side
406–609 mm
(16–24 in)
406 mm
(16 in)
152 mm
(6 in)
CEILING-MOUNTED BRACKET
The ceiling mount option uses only the locking clip screwed directly to the ceiling mounting surface.
CEILING-MOUNTED BRACKET - EXPLODED VIEW
Ceiling
Mounting
Surface
29 mm
(1.15 in)
32 mm
(1.25 in)
Sivoia QED
TM
Quiet Electronic Drive Window System 4.10
T O P V I E W O F C L I P A R M E X T E N D E D
I N U N L O C K E D P O S I T I O N
Track
Unlocked
Technical Support :
+44-(0)20-7702-0657
measuring
SYSTEM WIDTH
• Installed curtain covers both end caps so the track width equals the full system width as shown below.
System Width
MEASURING FOR MINIMUM
RECOMMENDED OVERLAP
• Determine the width of the system required for your application by measuring the widest part of your window opening. Curtains should overlap the window you are treating in most cases by a minimum of three inches on each side. When using the minimum overlap, the stack back of a fully-open curtain will cover a portion of the window area.
MEASURING FOR COMPLETE
WINDOW REVEAL
• To completely reveal a window when the curtain is open the stack back on the curtain must be considered. Consult stack diagrams for stack back dimensions.
• In addition be aware that depending on the construction and material the curtain will be slightly wider at the bottom than at the top.
LEFT OR RIGHT STACK
System Width
Stack=
Approximately 1/3
(system width)
CENTRE-DRAW CENTER STACK
System Width
Each Stack=
Approximately
1/6 (system width)
Sivoia QED
TM
Quiet Electronic Drive Window System 4.11
Technical Support :
+44-(0)20-7702-0657
hanging curtain fabric
CURTAIN HOOK SETTING
For the best system performance, a curtain hook setting of 13 mm (1/2 in) should be used. This allows the system to operate with minimal noise.
13 mm
(0.50 in)
CURTAIN FABRIC RETURN
101–165 mm (4.0–6.5 in)
(depends on wall mount bracket extension)
Sivoia QED
TM
Quiet Electronic Drive Window System 4.12
Technical Support :
+44-(0)20-7702-0657
wiring (identical to other Sivoia QED
™
systems)
4
3
2
1
f e m a l e E D U c o n n e c t o r f e m a l e E D U c o n n e c t o r
B
A shield
24 V~ Power
Supply
24 V~ Power
Supply
L u t r o n S i v o i a Q E D s e e To u c h k e y p a d
( B A C K )
Wire each Sivoia QED EDU to a 24 V~ power supply. Each EDU must be EARTH grounded. Each power supply can power ONLY ONE EDU, regardless of curtain size.
A
Communications Link
B
Power Wires
4 Conductors
3 Conductors
Sivoia QED
TM
Quiet Electronic Drive Window System 4.13
Technical Support :
+44-(0)20-7702-0657
89 mm
(3.5 in)
application examples
USE THE FOLLOWING APPLICATION
EXAMPLES TO HELP LAY OUT YOUR PROJECT
Single curtain track
• It is important to maintain enough clearance between the track and the inside face of the top treatment or ceiling recess to allow the fabric to move freely within the top treatment. All measurements shown below are minimums.
140 mm (5.5 in)
51 mm
(2.0 in)
51 mm (2 in)
89 mm (3.5 in)
25 mm (1.0 in)
25 mm (1.0 in)
SECTIONA-A SECTION
Dual-Mount curtain track
• Sivoia QED tracks can be used for a combination sheer/blackout treatment. These systems will require more clearance than a single track system.
235 mm (9.25 in)
184 mm (7.25 in)
51 mm
(2.0 in)
248 mm
(9.75 in)
25 mm (1.0 in)
SECTIONB-B SECTION
89 mm (3.5 in)
108 mm (4.25 in)
51 mm (2.0 in)
25 mm (1.0 in)
SECTIONA-A SECTION
Sivoia QED
TM
Quiet Electronic Drive Window System 4.14
Technical Support :
+44-(0)20-7702-0657
application examples – centre-draw
Tandem Curtain Track Systems
• Unlike standard motorised curtain systems the Sivoia
QED
TM
EDU controls the speed of your curtains with extreme precision. This allows two independent EDUs to be used to create a centre-open curtain. All measurements shown below are minimums.
140 mm (5.5 in)
89 mm (3.5 in)
51 mm (2.0 in)
51 mm (2.0 in)
25 mm (1.0 in)
SECTIONB-B SECTION
Curtain Track Corner Application
• Sivoia curtain track can be used in corner applications.
25 mm (1.0 in)
SECTIONA-A SECTION
89 mm (3.5 in)
SECTION B-B
Sivoia QED
TM
Quiet Electronic Drive Window System 4.15
SECTION SECTION A-A A-A
Technical Support :
+44-(0)20-7702-0657
To Contact Lutron:
WORLD HEADQUARTERS
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036
United States
Tel: +1-610-282-3800
Fax:+1-610-282-1243
CUSTOMER SERVICE/ORDERING
UK +44-(0)20-7702-0657 – 09.00 - 18.00 GMT
USA +1-800-446-1503 – 08.00 - 20.00 EST
CUSTOMER SERVICE/E-MAIL
EUROPEAN HEADQUARTERS
Lutron EA Ltd.
6 Sovereign Close
London, E1W 3JF
United Kingdom
Tel: +44-(0)20-7702-0657
Fax: +44-(0)20-7480-6899
TECHNICAL SUPPORT & SERVICES
UK +44-(0)20-7702-0657 – 09.00 - 18.00 GMT
USA +1-800–523-9466 – 24 hours/7 days
INTERNET www.lutron.com
ADDITIONAL LUTRON SALES OFFICES LOCATED IN :
United Kingdom Tel: +44-(0)20-7702-0657 Fax: +44-(0)20-7480-6899 FREEPHONE (UK) 0800-282-107
Germany
France
Spain-Madrid
Tel: +49-309-710-4590
Tel: +33-(0)1-44-70-71-86
Tel: +34-91-567-84-79
Fax: +49-309-710-4591 FREEPHONE 00800-5887 6635
Fax: +33-(0)1-44-70-70-97 FREEPHONE 0800-90-12-18
Hong Kong Tel: +852-2104-7733
Beijing Tel: +86-10-5877-1817
Shanghai Tel: +86-21-6288-1473
Singapore Tel: +65-6220-4666
Fax: +852-2104-7633
Fax: +86-10-5877-1816
Fax: +86-21-6288-1751
Fax: +65-6220-4333
©2005 Lutron Electronics Co., Inc.
P/N E-367-1101/EA Rev. C 12/05
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement