Zebra VC80 Vehicle Computer Quick Reference Guide

VC80
M1
M7
M2
M8
M3
M9
M4
M10
M5
M11
M6
M12
Vehicle Computer
Quick Reference Guide
2
VC80 Vehicle Computer
© 2015 Zebra Technologies Corporation.
No part of this publication may be reproduced or used in any form, or by any electrical
or mechanical means, without permission in writing from Zebra. This includes electronic
or mechanical means, such as photocopying, recording, or information storage and
retrieval systems. The material in this manual is subject to change without notice.
The software is provided strictly on an “as is” basis. All software, including firmware,
furnished to the user is on a licensed basis. Zebra grants to the user a non-transferable
and non-exclusive license to use each software or firmware program delivered
hereunder (licensed program). Except as noted below, such license may not be
assigned, sublicensed, or otherwise transferred by the user without prior written
consent of Zebra. No right to copy a licensed program in whole or in part is granted,
except as permitted under copyright law. The user shall not modify, merge, or
incorporate any form or portion of a licensed program with other program material,
create a derivative work from a licensed program, or use a licensed program in a
network without written permission from Zebra. The user agrees to maintain Zebra’s
copyright notice on the licensed programs delivered hereunder, and to include the
same on any authorized copies it makes, in whole or in part. The user agrees not to
decompile, disassemble, decode, or reverse engineer any licensed program delivered
to the user or any portion thereof.
Zebra reserves the right to make changes to any software or product to improve
reliability, function, or design. Zebra does not assume any product liability arising out of,
or in connection with, the application or use of any product, circuit, or application
described herein. No license is granted, either expressly or by implication, estoppel, or
otherwise under any Zebra, intellectual property rights. An implied license only exists
for equipment, circuits, and subsystems contained in Zebra products.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
www.zebra.com
Warranty
For the complete Zebra hardware product warranty statement, go to:
www.zebra.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s Technical or
Systems Support. If there is a problem with the equipment, they will contact Zebra
Support at: www.zebra.com/support.
For the latest version of this guide, go to: http://www.zebra.com/support.
Quick Reference Guide
3
Software Support
Zebra wants to ensure that customers have the latest release of entitled software
at the time of product purchase.
To confirm that your Zebra device shipped with the latest release of entitled
software, visit: www.zebra.com/support. Check for the latest software from
Software Downloads > Product Line/Product > Go.
If your device does not have the latest entitled software release as of your product
purchase date, please e-mail a request to Zebra at:
[email protected].
You must include the following essential device information with your request:
•
•
•
•
Model number
Serial number
Proof of purchase
Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest software
release, you will receive an e-mail containing a link directing you to a Zebra web
site to download the appropriate software.
4
VC80 Vehicle Computer
Introduction
The VC80 is a rugged vehicle mount computer that is designed to maximize
productivity in harsh environments. The VC80 is intended for use in commercial
and industrial applications with a focus on real time wireless data transactions
which options suit materials handling applications in warehouses, manufacturing
facilities, ports, yards, and freezers.
The VC80’s compact design improves visibility and reduces safety concerns while
retaining a large screen size (10.4”). Its 802.11 a/b/g/n/ac WLAN provides
real-time information that improves decision making, reduces errors, and
enhances productivity.
Unpacking
The following items are contained in the box:
• VC80 vehicle computer
• VC80 Quick Start Guide
• GPS antenna (for configurations with GPS only)
Carefully remove all protective material from around the device and save the
shipping container for later storage and shipping.
Inspect the equipment for damage. If you are missing any equipment or if you find
any damaged equipment, contact the Zebra Support Center immediately. See
Service Information on page 2 for contact information.
Removing Protective Film from Display
The front display of the VC80 is protected during transport by a transparent film.
This film should remain on the front display during assembly to avoid damage to
the front display surface. Only remove the film once all of the assembly work has
been completed.
Related Documents
The following document provides more information about the VC80 vehicle
computer.
•
VC80 User Guide, p/n MN002384Axx - provides detailed information for VC80
set up, operation, specifications and accessories.
For the latest version of this guide and all guides, go to:
http://www.zebra.com/support.
Quick Reference Guide
5
Features
Front View
LEDs
(three)
Resistive
Touch Screen
Unpairing
Bar Code
Pairing
Bar Code
M1
M7
Speaker
Blue
Modifier
Key
M2
M8
M3
M9
M4
M10
M5
M11
Programmable
Macro Keys
(6 + 6)
Power
Button
M6
M12
On Screen
Keyboard
Speaker Volume\
Display Brightness
Top View of External WiFi Antenna
802.11 a/b/g/n/ac Radio External Antenna Connectors
ANT 3
ANT 1
ANT 2
ANT 1 - Reverse Polarity SMA Jack (WLAN) / External Main WiFi Antenna
ANT 2 - Reverse Polarity SMA Jack (WLAN + BT) / External WiFi Diversity or MIMO Antenna
ANT 3 - SMA Jack (GPS)
NOTE Antenna options are dependent on the VC80 configuration. Some
configurations only have internal antennas while other configurations have
two or more external antenna connectors. WiFi antennas are not shipped with
the VC80 and must be ordered as a separate accessory.
For a complete list of configurations, refer to the VC80 User Guide at
www.zebra.com/support.
6
VC80 Vehicle Computer
Back View
Back View with Dust Cover
UPS
Battery
COM 1
COM 2
Vent
Strain Relief
(four)
Dust
Cover
Back View without Dust Cover
Ethernet or
CAN Bus
(optional)
Standard
USB
Ground
Lug
Power
Strain Relief
(four)
Powered Speaker/
USB
Mic
Quick Reference Guide
7
Setting up the VC80 Software
To set up the VC80 software:
1.
2.
Connect the VC80 to an external power source.
Read applicable Microsoft Windows EULA.
•
•
3.
4.
5.
6.
7.
8.
9.
For Windows Embedded Standard 7 OS, see MICROSOFT SOFTWARE LICENSE
TERMS WINDOWS EMBEDDED STANDARD 7 on page 12.
For Windows 7 Professional for Embedded Systems OS, see WINDOWS 7
PROFESSIONAL FOR EMBEDDED SYSTEMS (ALL VERSIONS) on page 26.
Press the Power button to turn the VC80 On (see Front View on page 5).
Configure the password for VC-Admin Administrator User:
a. Select Start > Control Panel > User Accounts.
b. Select Create a Password for Your Account.
c. Enter new password and password hint.
d. Select Create Password.
Select region and language settings:
a. Select Control Panel > Region and Language.
b. Select Format to set the date and time.
c. Select Location to specify a location.
d. Configure Keyboards and Languages as required.
e. Select the Administrative tab to create additional user accounts.
Change the computer name:
a. Select Start > Control Panel > System.
b. Select Advanced System Properties.
c. Select the Computer Name tab and click on Change to enter a new computer
name.
d. Reboot the VC80 to apply the new computer name.
Connect the VC80 to WLAN (see Wireless Network Configuration on page 8).
Edit the TekTerm terminal emulation parameters (optional).
Only reboot if prompted.
For detailed information, refer to the VC80 User Guide at www.zebra.com/support.
Optional Software for Configuring the VC80
Configure the VC80 before fastening it to machines or vehicles. The following
software options are available:
• VC80 Control Panel for quick setup and configuration file management.
• TekWedge to interface with serial and Bluetooth scanners.
• My-T-Soft for on screen keyboard customization and key mapping.
• Windows Management Instrumentation (WMI) for VC control panel registry
setting support. With WMI, management data may be obtained from remote
computers.
• U-Center to configure GPS on VC80 configurations with GPS.
For detailed information, refer to the VC80 User Guide at www.zebra.com/support.
8
VC80 Vehicle Computer
Connecting to Terminal Emulation
The VC80 supports terminal emulators such as TekTerm. To connect to a host,
have the following information available:
•
•
•
Alias name or IP host address
Port number of the host system
Emulation.
To connect to a host:
1.
Ensure the mobile client network settings are correctly configured.
2.
Ensure the VC80 is connected to the network if connecting via WLAN.
3.
Launch the terminal emulation program.
For detailed information, refer to the VC80 User Guide at www.zebra.com/support.
Wireless Network Configuration
To connect to the WLAN:
1.
Click on the WiFi icon in the system tray to display available WLAN networks.
2.
Click on the desired network and select Connect.
For detailed information, such as applying advanced settings, refer to the VC80
User Guide at www.zebra.com/support.
Bluetooth
The VC80 is equipped with Bluetooth radios for communication with a variety of
Bluetooth peripherals. Use the Bluetooth Control Panel to configure Bluetooth
peripherals.
For detailed information, refer to the VC80 User Guide at www.zebra.com/support.
Programmable Keys
There are six programmable macro keys on the VC80 front bezel. When used
with the Blue Modifier Key, six additional programmable keys are available. To
map keys, use the Control Panel to assign scancodes or My-T-Soft to macro map.
For detailed information, refer to the VC80 User Guide at www.zebra.com/support.
Quick Reference Guide
Installation
CAUTION Do not install the vehicle computer in a location that affects
vehicle safety, visibility, or ability to drive.
If mounted above head height, it is recommended to also use
a safety strap with the mount bracket.
Installing the VC80 on a Forklift
1.
Attach the desired mount to the VC80. Refer to the VC80 User Guide at
www.zebra.com/support for detailed mounting options and instructions.
2.
Attach the mounted VC80 to the vehicle and position in a location that does not
obstruct the operator’s view.
View Obstruction Considerations
3.
If using an external antenna, connect antenna in a vertical position to the VC80.
CAUTION Tighten peripherals with thumbscrews by hand only. Do not
use tools for tightening thumbscrews.
NOTE If installing peripherals, allow enough space when selecting a
mounting location.
4.
Connect peripherals to the VC80. Place the cables in the strain relief brackets
inside the dust cover and replace the dust cover (see Back View on page 6).
5.
Connect the VC80 to the vehicle DC supply.
6.
Press the Power button to turn the device On or Off (see Front View on page 5).
9
10
VC80 Vehicle Computer
Connect Optional Parts and Accessories
Use the VC80 connection ports to connect optional parts and accessories (see
Back View on page 6).
Refer to the VC80 User Guide at www.zebra.com/support for a complete list of
optional parts, accessories, and part numbers.
•
Antenna options
•
Mounting options
•
Scanner holder, keyboard mounting tray, keypad side mount bracket
•
Keyboard and numeric keypad
•
Cables and power supplies
•
Miscellaneous: speaker/microphone, screen protector, stylus.
Connecting Vehicle DC Supply
NOTE Power adapter and extension cable requirements may vary. Refer to the
VC80 User Guide at www.zebra.com/support for a complete list of optional
parts and accessories.
Without Power Pre-regulator
For vehicles with DC power 48V or less
M1
M7
M2
M8
M3
M9
M4
M10
M5
M11
With Power Pre-regulator
For vehicles with DC power greater than 48V
M6
M12
M1
M7
M2
M8
M3
M9
M4
M10
M5
M11
M6
M12
CAUTION Do not use the diode/choke assembly in the Extension Power Cable kit.
Quick Reference Guide
Ergonomics
Avoid Extreme Wrist Angles
Optimum Wrist Positions
11
12
VC80 Vehicle Computer
MICROSOFT SOFTWARE LICENSE TERMS
WINDOWS EMBEDDED STANDARD 7
These license terms are an agreement between you and Zebra Technologies Corp. Please read
them. They apply to the software included on this device. The software also includes any
separate media on which you received the software.
The software on this device includes software licensed from Microsoft Corporation or its affiliate.
The terms also apply to any Microsoft
• Updates
• Supplements
• Internet-based services
• Support services.
for this software, unless other terms accompany those items. If so, those terms apply.
If you obtain updates or supplements directly from Microsoft, then Microsoft, and not Zebra
Technologies Corp., licenses those to you.
As described below, using the software also operates as your consent to the
transmission of certain computer information for Internet-based services.
By using the software, you accept these terms. If you do not accept them, do not use the
software. Instead, contact Zebra Technologies Corp. to determine its return policy for a
refund or credit
If you comply with these license terms, you have the rights below.
1. USE RIGHTS
Use. The software license is permanently assigned to the device with which you acquired
the software. You may use the software on the device.
2. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS
a. Specific Use. Zebra Technologies Corp. designed the device for a specific use. You may
only use the software for that use.
b. Other Software. You may use other programs with the software as long as the other
programs:
• directly supports the manufacturer's specific use for the device, or
• provide system utilities, resource management, or anti-virus or similar protection.
• Software that provides consumer or business tasks or processes may not be run on
the device. This includes email, word processing, spreadsheet, database, scheduling
and personal finance software. The device may use terminal services protocols to
access such software running on a server.
c. Device Connections. You may not use the software as server software. In other words,
more than one device may not access, display, run, share or use the software at the
same time.
You may use terminal services protocols to connect the device to a server running
business task or processes software such as email, word processing, scheduling or
spreadsheets.
You may allow up to ten other devices to access the software to use:
• File Services
• Print Services
• Internet Information Services
• Internet Connection Sharing and Telephony Services.
The ten connection limit applies to devices that access the software indirectly through
"multiplexing" or other software or hardware that pools connections. You may use
unlimited inbound connections at any time via TCP/IP.
d. Remote Access Technologies. You may access and use the software remotely from
another device using remote access technologies as follows.
Quick Reference Guide
13
Remote Desktop. The single primary user of the device may access a session from any
other device using Remote Desktop or similar technologies. A "session" means the
experience of interacting with the software, directly or indirectly, through any combination
of input, output and display peripherals. Other users may access a session from any
device using these technologies, if the remote device is separately licensed to run the
software.
Other Access Technologies. You may use Remote Assistance or similar technologies to
share an active session.
Other Remote Uses. You may allow any number of devices to access the software for
purposes other than those described in the Device Connections and Remote Access
Technologies sections above, such as to synchronize data between devices.
e. Font Components. While the software is running, you may use its fonts to display and
print content. You may only:
• embed fonts in content as permitted by the embedding restrictions in the fonts; and
• temporarily download them to a printer or other output device to print content.
f. Icons, images and sounds. While the software is running, you may use but not share its
icons, images, sounds, and media.
3. VHD BOOT. Additional copies of the software created using the software's Virtual Hard Disk
functionality ("VHD Image") may be pre-installed on the physical hard disk of the device.
These VHD Images may only be used for maintaining or updating the software installed on
the physical hard disk or drive. If the VHD Image is the only software on your device, it may
be used as the primary operating system but all other copies of the VHD Image may only be
used for maintenance and updating.
4. POTENTIALLY UNWANTED SOFTWARE. The software may include Windows Defender.
If Windows Defender is turned on, it will search this device for "spyware," "adware" and
other potentially unwanted software. If it finds potentially unwanted software, the software
will ask you if you want to ignore, disable (quarantine) or remove it. Any potentially
unwanted software rated "high" or "severe," will be automatically removed after scanning
unless you change the default setting. Removing or disabling potentially unwanted software
may result in:
• Other software on your device ceasing to work, or
• Your breaching a license to use other software on this device.
By using this software, it is possible that you will also remove or disable software that is not
potentially unwanted software.
5. SCOPE OF LICENSE. The software is licensed, not sold. This agreement only gives you
some rights to use the software. Zebra Technologies Corp. and Microsoft reserve all other
rights. Unless applicable law gives you more rights despite this limitation, you may use the
software only as expressly permitted in this agreement. In doing so, you must comply with
any technical limitations in the software that allow you to use it only in certain ways. For
more information, see the software documentation or contact Zebra Technologies Corp. You
may not:
• work around any technical limitations in the software
• reverse engineer, decompile or disassemble the software
• make more copies of the software than specified in this agreement
• publish the software for others to copy
• rent, lease or lend the software; or
• use the software for commercial software hosting services.
Except as expressly provided in this agreement, rights to access the software on this device
do not give you any right to implement Microsoft patents or other Microsoft intellectual
property in software or devices that access this device.
6.
INTERNET-BASED SERVICES. Microsoft provides Internet-based services with the
software. Microsoft may change or cancel them at any time.
14
VC80 Vehicle Computer
a. Consent for Internet-Based Services. The device may contain one or more of the
software features described below. These features connect to Microsoft or service
provider computer systems over the Internet. In some cases, you will not receive a
separate notice when they connect. For more information about these features, visit
go.microsoft.com/fwlink/?linkid=104604.
By using these features, you consent to the transmission of this information.
Microsoft does not use the information to identify or contact you.
Computer Information. The following features use Internet protocols, which send to the
appropriate systems computer information, such as your Internet protocol address, the
type of operating system and browser, the name and version of the software you are
using, and the language code of the device where you installed the software. Microsoft
uses this information to make the Internet-based services available to you. Zebra
Technologies Corp. has elected to turn on the following features on the device
• Plug and Play and Plug and Play Extensions. You may connect new hardware to your
device. Your device may not have the drivers needed to communicate with that
hardware. If so, the update feature of the software can obtain the correct driver from
Microsoft and install it on your device.
• Web Content Features. Features in the software can retrieve related content from
Microsoft and provide it to you. Examples of these features are clip art, templates,
online training, online assistance and Appshelp. You may choose to switch them off or
not use them.
• Digital Certificates. The software uses x.509 version 3 digital certificates. These
digital certificates confirm the identity of user sending information to each other and
allow you to encrypt the information. The software retrieves certificates and updates
certificate revocation lists over the Internet.
• Auto Root Update. The Auto Root Update feature updates the list of trusted certificate
authorities. You can switch off this feature.
• Windows Media Digital Rights Management. Content owners use Windows Media
digital rights management technology (WMDRM) to protect their intellectual property,
including copyrights. This software and third party software use WMDRM to play and
copy WMDRM-protected content. If the software fails to protect the content, content
owners may ask Microsoft to revoke the software's ability to use WMDRM to play or
copy protected content. Revocation does not affect other content. When you
download licenses for protected content, you agree that Microsoft may include a
revocation list with the licenses. Content owners may require you to upgrade
WMDRM to access their content. Microsoft software that includes WMDRM will ask
for your consent prior to the upgrade. If you decline an upgrade, you will not be able
to access content that requires the upgrade. You may switch off WMDRM features
that access the Internet. When these features are off, you can still play content for
which you have a valid license.
• Windows Media Player. When you use Windows Media Player, it checks with
Microsoft for
•compatible online music services in your region;
•new versions of the player; and
•codecs if your device does not have the correct ones for playing content.
You can switch off this feature. For more information, go to:
go.microsoft.com/fwlink/?LinkId=51331.
• Malicious Software Removal/Clean On Upgrade. Before installation of the software,
the software will check and remove certain malicious software listed at
www.support.microsoft.com/?kbid=890830 ("Malware") from your device. When the
software checks your device for Malware, a report will be sent to Microsoft about any
Malware detected or errors that occurred while the software was checking for
Malware. No information that can be used to identify you is included in the report. You
Quick Reference Guide
•
•
•
•
•
•
•
15
may disable the software's Malware reporting functionality by following the
instructions found at www.support.microsoft.com/?kbid=890830.
Network Awareness. This feature determines whether a system is connected to a
network by either passive monitoring of network traffic or active DNS or HTTP
queries. The query only transfers standard TCP/IP or DNS information for routing
purposes. You can switch off the active query feature through a registry setting.
Windows Time Service. This service synchronizes with www.time.windows.com once
a week to provide your l device with the correct time. The connection uses standard
NTP protocol.
Search Suggestions Service. In Internet Explorer, when you type a search query in
the Instant Search box or type a question mark (?) before your search term in the
Address bar, you will see search suggestions as you type (if supported by your search
provider). Everything you type in the Instant Search box or in the Address bar when
preceded by a question mark (?) is sent to your search provider as you type. Also,
when you press Enter or click the Search button, the text in the Instant Search box or
Address bar is sent to the search provider. If you use a Microsoft search provider, use
of the information sent is subject to the Microsoft Online Privacy Statement. This
statement is available at go.microsoft.com/fwlink/?linkid=31493. If you use a
third-party search provider, use of the information sent will be subject to the third
party's privacy practices. You can turn search suggestions off at any time. To do so,
use Manage Add-ons under the Tools button in Internet Explorer. For more
information about the search suggestions service, see
go.microsoft.com/fwlink/?linkid=128106.
Consent to Update Infrared Emitter/Receiver. The software may contain technology to
ensure the proper functioning of the infrared emitter/receiver device shipped with
certain Media Center-based products. You agree that the software may update the
firmware of this device.
Media Center Online Promotions. If you use Media Center features of the software to
access Internet-based content or other Internet-based services, such services may
obtain the following information from the software to enable you to receive, accept
and use certain promotional offers:
•certain device information, such as your Internet protocol address, the type of
operating system and browser you are using, and the name and version of the
software you are using,
•the requested content, and
•the language code of the device where you installed the software.
•Your use of the Media Center features to connect to those services serves as
your consent to the collection and use of such information.
Media Playback Updates. The software on the device may include media playback
features which receives updates directly from the MSCORP Media Playback Update
servers. If activated by your manufacturer, these updates will be downloaded and
installed without further notice to you. The manufacturer is responsible for ensuring
these updates work on your device.
Windows Update Agent. The software on the device includes Windows Update Agent
("WUA"). This feature enables your device to access Windows Updates either directly
from MSCORP Windows Update server or from a server installed with the required
server component and from the Microsoft Windows Update server. To enable the
proper functioning of the Windows Update service in the software (if you use it)
updates or downloads to the Windows Update service will be required from time to
time and downloaded and installed without further notice to you. Without limiting any
other disclaimer in these license terms or any license terms accompanying a
Windows Update, you acknowledge and agree that no warranty is provided by
Microsoft Corporation or their affiliates with respect to any Windows Update that you
install or attempt to install on your device.
16
VC80 Vehicle Computer
b. Use of Information. Microsoft may use the device information, error reports, and
Malware reports to improve our software and services. We may also share it with others,
such as hardware and software vendors. They may use the information to improve how
their products run with Microsoft software.
c. Misuse of Internet-based Services. You may not use these services in any way that
could harm them or impair anyone else's use of them. You may not use the services to try
to gain unauthorized access to any service, data, account or network by any means.
7. PRODUCT SUPPORT. Contact Zebra Technologies Corp. for support options. Refer to the
support number provided with the device.
8. MICROSOFT .NET BENCHMARK TESTING. The software includes one or more
components of the .NET Framework (".NET Components"). You may conduct internal
benchmark testing of those components. You may disclose the results of any benchmark
test of those components, provided that you comply with the conditions set forth at
go.microsoft.com/fwlink/?LinkID=66406.
Notwithstanding any other agreement you may have with Microsoft, if you disclose such
benchmark test results, Microsoft shall have the right to disclose the results of benchmark
tests it conducts of your products that compete with the applicable .NET Component,
provided it complies with the same conditions set forth at
go.microsoft.com/fwlink/?LinkID=66406.
9. BACKUP COPY. You may make one backup copy of the software. You may use it only to
reinstall the software on the device.
10. DOCUMENTATION. Any person that has valid access to your device or internal network
may copy and use the documentation for your internal, reference purposes.
11. PROOF OF LICENSE. If you acquired the software on the device, or on a disc or other
media, a genuine Certificate of Authenticity label with a genuine copy of the software
identifies licensed software. To be valid, this label must be affixed to the device, or included
on or in Zebra Technologies Corp.'s software packaging. If you receive the label separately,
it is not valid. You should keep the label on the device or packaging to prove that you are
licensed to use the software. To identify genuine Microsoft software, see
www.howtotell.com.
12. TRANSFER TO A THIRD PARTY. You may transfer the software only with the device, the
Certificate of Authenticity label, and these license terms directly to a third party. Before the
transfer, that party must agree that these license terms apply to the transfer and use of the
software. You may not retain any copies of the software including the backup copy.
13. NOTICE ABOUT THE H.264/AVC VISUAL STANDARD, THE VC-1 VIDEO STANDARD,
THE MPEG-4 VISUAL STANDARD AND THE MPEG-2 VIDEO STANDARD. This software
may include H.264/AVC, VC-1, MPEG-4 Part 2, and MPEG-2 visual compression
technology. If the software includes those visual compression technologies MPEG LA,
L.L.C. requires this notice:
THIS PRODUCT IS LICENSED UNDER ONE OR MORE VIDEO PATENT PORTFOLIO
LICENSES SUCH AS, AND WITHOUT LIMITATION, THE AVC, THE VC-1, THE MPEG-4
PART 2 VISUAL, AND THE MPEG 2 VIDEO PATENT PORTFOLIO LICENSES FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO STANDARDS") AND/OR (ii)
DECODE VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL
AND NON-COMMERCIAL ACTIVITY OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE VIDEO UNDER SUCH PATENT PORTFOLIO LICENSES.
NONE OF THE LICENSES EXTEND TO ANY OTHER PRODUCT REGARDLESS OF
WHETHER SUCH PRODUCT IS INCLUDED WITH THIS PRODUCT IN A SINGLE
ARTICLE. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
WWW.MPEGLA.COM.
Quick Reference Guide
17
14. NOTICE ABOUT THE MP3 AUDIO STANDARD. This software includes MP3 audio
15.
16.
17.
18.
19.
20.
21.
encoding and decoding technology as defined by ISO/IEC 11172-3 and ISO/IEC 13818-3. It
is not licensed for any implementation or distribution in any commercial product or service.
NOT FAULT TOLERANT. The software is not fault tolerant. Zebra Technologies Corp.
installed the software on the device and is responsible for how it operates on the
device.
RESTRICTED USE. The Microsoft software was designed for systems that do not require
fail-safe performance. You may not use the Microsoft software in any device or system in
which a malfunction of the software would result in foreseeable risk of injury or death to any
person. This includes operation of nuclear facilities, aircraft navigation or communication
systems and air traffic control.
NO WARRANTIES FOR THE SOFTWARE. The software is provided "as is". You bear
all risks of using it. Microsoft gives no express warranties, guarantees or conditions.
Any warranties you receive regarding the device or the software do not originate
from, and are not binding on, Microsoft or its affiliates. When allowed by your local
laws, Zebra Technologies Corp. and Microsoft exclude implied warranties of
merchantability, fitness for a particular purpose and non-infringement.
LIABILITY LIMITATIONS. You can recover from Microsoft and its affiliates only direct
damages up to two hundred fifty U.S. Dollars (U.S. $250.00). You cannot recover any
other damages, including consequential, lost profits, special, indirect or incidental
damages.
This limitation applies to:
• anything related to the software, services, content (including code) on third
party internet sites, or third party programs, and
• claims for breach of contract, breach of warranty, guarantee or condition,
strict liability, negligence, or other tort to the extent permitted by applicable
law.
It also applies even if Microsoft should have been aware of the possibility of the
damages. The above limitation may not apply to you because your country may not
allow the exclusion or limitation of incidental, consequential or other damages.
EXPORT RESTRICTIONS. The software is subject to United States export laws and
regulations. You must comply with all domestic and international export laws and
regulations that apply to the software. These laws include restrictions on destinations, end
users and end use. For additional information, see www.microsoft.com/exporting.
ENTIRE AGREEMENT. This agreement, additional terms (including any printed-paper
license terms that accompany the software and may modify or replace some or all of these
terms), and the terms for supplements, updates, Internet-based services and support
services that you use, are the entire agreement for the software and support services.
APPLICABLE LAW
a. United States. If you acquired the software in the United States, Washington state law
governs the interpretation of this agreement and applies to claims for breach of it,
regardless of conflict of laws principles. The laws of the state where you live govern all
other claims, including claims under state consumer protection laws, unfair competition
laws, and in tort.
b. Outside the United States. If you acquired the software in any other country, the laws of
that country apply.
22. Third Party Programs. Microsoft provides the following copyright notices for third party
software included in the software. These notices are required by the respective copyright
holders and do not change your license to use this software.
Portions of this software are based in part on the work of Spider Systems ® Limited. Because
Microsoft has included the Spider Systems Limited software in this product, Microsoft is required
to include the following text that accompanied such software:
18
VC80 Vehicle Computer
Copyright 1987 Spider Systems Limited
Copyright 1988 Spider Systems Limited
Copyright 1990 Spider Systems Limited
Portions of this software are based in part on the work of Seagate Software.
Portions of this software are based in part on the work of ACE*COMM Corp. Because Microsoft
has included the ACE*COMM Corp. software in this product, Microsoft is required to include the
following text that accompanied such software:
Copyright 1995-1997 ACE*COMM Corp
Portions of this software are based in part on the work of Sam Leffler and Silicon Graphics, Inc.
Because Microsoft has included the Sam Leffler and Silicon Graphics software in this product,
Microsoft is required to include the following text that accompanied such software:
Copyright © 1988-1997 Sam Leffler
Copyright © 1991-1997 Silicon Graphics, Inc.
Permission to use, copy, modify, distribute, and sell this software and its documentation for
any purpose is hereby granted without fee, provided that (i) the above copyright notices
and this permission notice appear in all copies of the software and related documentation,
and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising
or
publicity relating to the software without the specific, prior written permission of Sam Leffler
and Silicon Graphics.
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY
KIND,
OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
PROFITS,WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON
ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE
OR PERFORMANCE OF THIS SOFTWARE.
Portions Copyright © 1998 PictureTel Corporation
Portions of this software are based in part on the work of Highground Systems. Because
Microsoft has included the Highground Systems software in this product, Microsoft is required to
include the following text that accompanied such software:
Copyright © 1996-1999 Highground Systems
Windows 7 incorporates compression code from the Info-ZIP group. There are no extra charges
or costs due to the use of this code, and the original compression sources are freely available
from www.info-zip.org/ or ftp://ftp.info-zip.org/pub/infozip/src/ on the Internet.
Portions Copyright © 2000 SRS Labs, Inc
This product includes software from the 'zlib' general purpose compression library.
Portions of this software are based in part on the work of ScanSoft, Inc. Because Microsoft has
included the ScanSoft, Inc. software in this product, Microsoft is required to include the following
text that accompanied such software:
TextBridge® OCR © by ScanSoft, Inc.
Portions of this software are based in part on the work of University of Southern California.
Because Microsoft has included the University of Southern California software in this product,
Microsoft is required to include the following text that accompanied such software
Quick Reference Guide
19
Copyright © 1996 by the University of Southern California
All rights reserved.
Permission to use, copy, modify, and distribute this software and its documentation in
source and binary forms for any purpose and without fee is hereby granted, provided that
both the above copyright notice and this permission notice appear in all copies, and that
any documentation, advertising materials, and other materials related to such distribution
and use acknowledge that the software was developed in part by the University of
Southern California, Information Sciences Institute. The name of the University may not be
used to endorse or promote products derived from this software without specific prior
written permission.
THE UNIVERSITY OF SOUTHERN CALIFORNIA makes no representations about the
suitability of this software for any purpose. THIS SOFTWARE IS PROVIDED "AS IS" AND
WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE.
Other copyrights might apply to parts of this software and are so noted when applicable.
Portions of this software are based in part on the work of James Kanze. Because Microsoft has
included the James Kanze software in this product, Microsoft is required to include the following
text that accompanied such software:
COPYRIGHT AND PERMISSION NOTICE
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, publish, distribute,
and/or sell copies of the Software, and to permit persons to whom the Software is
furnished to do so, provided that the above copyright notice(s) and this permission notice
appear in all copies of the Software and that both the above copyright notice(s) and this
permission notice appear in supporting documentation. Permission is also given to modify
the software to any extend, under the condition that, in the modified software, the prefix
"GB_" is changed to something else, and the name directories for includes files ("gb" in
this distribution) is also changed.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR
ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software without
prior written authorization of the copyright holder.
This product contains software from Cisco ISAKMP Services.
Portions of this software are based in part on the work of RSA Data Security, Inc. Because
Microsoft has included the RSA Data Security, Inc. software in this product, Microsoft is required
to include the following text that accompanied such software:
Copyright © 1990, RSA Data Security, Inc. All rights reserved.
License to copy and use this software is granted provided that it is identified as the "RSA
Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or
20
VC80 Vehicle Computer
referencing this software or this function. License is also granted to make and use
derivative works provided that such works are identified as "derived from the RSA Data
Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing the
derived work.
RSA Data Security, Inc. makes no representations concerning either the merchantability of
this software or the suitability of this software for any particular purpose. It is provided "as
is" without express or implied warranty of any kind.
These notices must be retained in any copies of any part of this documentation and/or
software.
Portions of this software are based in part on the work of OpenVision Technologies, Inc.
Because Microsoft has included the OpenVision Technologies, Inc. software in this product,
Microsoft is required to include the following text that accompanied such software:
Copyright 1993 by OpenVision Technologies, Inc.
Permission to use, copy, modify, distribute, and sell this software and its documentation for
any purpose is hereby granted without fee, provided that the above copyright notice
appears in all copies and that both that copyright notice and this permission notice appear
in supporting documentation, and that the name of OpenVision not be used in advertising
or publicity pertaining to distribution of the software without specific, written prior
permission. OpenVision makes no representations about the suitability of this software for
any purpose. It is provided "as is" without express or implied warranty.
OPENVISION DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
NO EVENT SHALL OPENVISION BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Portions of this software are based in part on the work of Regents of The University of Michigan.
Because Microsoft has included the Regents of The University of Michigan software in this
product, Microsoft is required to include the following text that accompanied such software:
Copyright © 1995, 1996 Regents of The University of Michigan.
All Rights Reserved.
Permission to use, copy, modify, and distribute this software and its documentation for any
purpose and without fee is hereby granted, provided that the above copyright notice
appears in all copies and that both that copyright notice and this permission notice appear
in supporting documentation, and that the name of The University of Michigan not be used
in advertising or publicity pertaining to distribution of the software without specific, written
prior permission. This software is supplied as is without expressed or implied warranties of
any kind.
Copyright © 1993, 1994 Regents of the University of Michigan.
All rights reserved.
Redistribution and use in source and binary forms are permitted provided that this notice is
preserved and that due credit is given to the University of Michigan at Ann Arbor. The
name of the University may not be used to endorse or promote products derived from this
software without specific prior written permission. This software is provided ``as is'' without
express or implied warranty.
Portions of this software are based in part on the work of Massachusetts Institute of Technology.
Because Microsoft has included the Massachusetts Institute of Technology software in this
product, Microsoft is required to include the following text that accompanied such software:
Copyright 1989, 1990 by the Massachusetts Institute of Technology. All Rights Reserved.
Quick Reference Guide
21
Export of this software from the United States of America may require a specific license
from the United States Government. It is the responsibility of any person or organization
contemplating export to obtain such a license before exporting.
WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby granted, provided that the
above copyright notice appear in all copies and that both that copyright notice and
this permission notice appear in supporting documentation, and that the name of M.I.T. not
be used in advertising or publicity pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations about the suitability of this
software for any purpose. It is provided "as is" without express or implied warranty.
Under U.S. law, this software may not be exported outside the US without license from the
U.S. Commerce department.
Copyright 1994 by the Massachusetts Institute of Technology. All Rights Reserved.
Export of this software from the United States of America may require a specific license
from the United States Government. It is the responsibility of any person or organization
contemplating export to obtain such a license before exporting.
WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby granted, provided that the
above copyright notice appear in all copies and that both that copyright notice and this
permission notice appear in supporting documentation, and that the name of M.I.T. not be
used in advertising or publicity pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations about the suitability of this
software for any purpose. It is provided "as is" without express or implied warranty.
This product includes software developed by the University of California, Berkeley and its
contributors.
Portions of this software are based in part on the work of the "Entrust" security technology
licensed from Northern Telecom.
Portions of this software are based in part on the work of Hewlett-Packard Company. Because
Microsoft has included the Hewlett-Packard Company software in this product, Microsoft is
required to include the following text that accompanied such software:
Copyright © 1994 Hewlett-Packard Company
Permission to use, copy, modify, distribute and sell this software and its documentation for
any purpose is hereby granted without fee, provided that the above copyright notice
appear in all copies and that both that copyright notice and this permission notice appear
in supporting documentation. Hewlett-Packard Company and Microsoft Corporation make
no representations about the suitability of this software for any purpose. It is provided "as
is" without express or implied warranty.
This product includes software from the 'libpng' PNG reference library.
Portions of this software are based in part on the work of Autodesk, Inc. Because Microsoft has
included the Autodesk, Inc. software in this product, Microsoft is required to include the following
text that accompanied such software:
© Copyright 1995 by Autodesk, Inc.
This product contains graphics filter software; this software is based in part on the work of the
Independent JPEG Group.
This product includes "True Verb" technology from KS Waves Ltd.
Portions of this software are based in part on the work of SGS-Thomson Microelectronics, Inc.
Because Microsoft has included the SGS-Thomson Microelectronics, Inc. software in this
product, Microsoft is required to include the following text that accompanied such software:
Copyright 1996 SGS-Thomson Microelectronics, Inc. All Rights Reserved
22
VC80 Vehicle Computer
Portions of this software are based in part on the work of Unicode, Inc. Because Microsoft has
included the Unicode, Inc. software in this product, Microsoft is required to include the following
text that accompanied such software:
COPYRIGHT AND PERMISSION NOTICE
Copyright © 1991-2005 Unicode, Inc. All rights reserved. Distributed under the Terms of
Use in www.unicode.org/copyright.html.
Permission is hereby granted, free of charge, to any person obtaining a copy of the
Unicode data files and any associated documentation (the "Data Files") or Unicode
software and any associated documentation (the "Software") to deal in the Data Files or
Software without restriction, including without limitation the rights to use, copy, modify,
merge, publish, distribute, and/or sell copies of the Data Files or Software, and to permit
persons to whom the Data Files or Software are furnished to do so, provided that (a) the
above copyright notice(s) and this permission notice appear with all copies of the Data
Files or Software, (b) both the above copyright notice(s) and this permission notice appear
in associated documentation, and © there is clear notice in each modified Data File or in
the Software as well as in the documentation associated with the Data File(s) or Software
that the data or software has been modified.
THE DATA FILES AND SOFTWARE ARE PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR
ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
OF THE DATA FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in these Data Files or
Software without prior written authorization of the copyright holder.
The Combined PostScript Driver was the result of a cooperative development process by Adobe
Systems Incorporated and Microsoft Corporation.
Portions of this software are based in part on the work of Media Cybernetics. Because Microsoft
has included the Media Cybernetics software in this product, Microsoft is required to include the
following text that accompanied such software:
HALO Image File Format Library © 1991-1992 Media Cybernetics, Inc.
Portions of this software are based in part on the work of Luigi Rizzo. Because Microsoft has
included the Luigi Rizzo software in this product, Microsoft is required to include the following
text that accompanied such software:
© 1997-98 Luigi Rizzo ([email protected])
Portions derived from code by Phil Karn ([email protected]), Robert Morelos-Zaragoza
([email protected]) and Hari Thirumoorthy ([email protected]),
Aug 1995
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
Quick Reference Guide
23
THIS SOFTWARE IS PROVIDED BY THE AUTHORS "AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Portions of this software are based in part on the work of W3C. Because Microsoft has included
the W3C software in this product, Microsoft is required to include the following text that
accompanied such software:
W3C ® SOFTWARE NOTICE AND LICENSE
www.w3.org/Consortium/Legal/2002/copyright-software-20021231
This work (and included software, documentation such as READMEs, or other related
items) is being provided by the copyright holders under the following license. By obtaining,
using and/or copying this work, you (the licensee) agree that you have read, understood,
and will comply with the following terms and conditions.
Permission to copy, modify, and distribute this software and its documentation, with or
without modification, for any purpose and without fee or royalty is hereby granted,
provided that you include the following on ALL copies of the software and documentation
or portions thereof, including modifications:
1. The full text of this NOTICE in a location viewable to users of the redistributed or
derivative work.
2. Any pre-existing intellectual property disclaimers, notices, or terms and conditions. If
none exist, the W3C Software Short Notice should be included (hypertext is preferred, text
is permitted) within the body of any redistributed or derivative code.
3. Notice of any changes or modifications to the files, including the date changes were
made. (We recommend you provide URLs to the location from which the code is derived.)
THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT
HOLDERS MAKE NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF THE
SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD PARTY
PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS.
COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE
OR DOCUMENTATION.
The name and trademarks of copyright holders may NOT be used in advertising or
publicity pertaining to the software without specific, written prior permission. Title to
copyright in this software and any associated documentation will at all times remain with
copyright holders.
Portions of this software are based in part on the work of Sun Microsystems, Inc. Because
Microsoft has included the Sun Microsystems, Inc. software in this product, Microsoft is required
to include the following text that accompanied such software:
Sun RPC is a product of Sun Microsystems, Inc. and is provided for unrestricted use
provided that this legend is included on all tape media and as a part of the software
program in whole or part. Users may copy or modify Sun RPC without charge, but are not
authorized to license or distribute it to anyone else except as part of a product or program
developed by the user.
24
VC80 Vehicle Computer
SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING
THE WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A
PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR
TRADE PRACTICE.
Sun RPC is provided with no support and without any obligation on the part of Sun
Microsystems, Inc. to assist in its use, correction, modification or enhancement.
SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN
RPC OR ANY PART THEREOF.
In no event will Sun Microsystems, Inc. be liable for any lost revenue or profits or other
special, indirect and consequential damages, even if Sun has been advised of the
possibility of such damages.
Sun Microsystems, Inc.
2550 Garcia Avenue
Mountain View, California 94043
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
Portions of this software are based in part on the work of Andrei Alexandrescu. Because
Microsoft has included the Andrei Alexandrescu software in this product, Microsoft is required to
include the following text that accompanied such software:
The Loki Library
Copyright © 2001 by Andrei Alexandrescu
This code accompanies the book:
Alexandrescu, Andrei. "Modern C++ Design: Generic Programming and Design Patterns
Applied." Copyright © 2001. Addison-Wesley.
Permission to use, copy, modify, distribute and sell this software for any purpose is hereby
granted without fee, provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in supporting documentation.
The author or Addison-Welsey Longman make no representations about the suitability of
this software for any purpose. It is provided "as is" without express or implied warranty.
Portions Copyright © 1995 by Jeffrey Richter
Portions of this software are based in part on the work of the Distributed Management Task
Force, Inc. (DMTF). Because Microsoft has included software based on DMTF specifications in
this product, Microsoft is required to include the following text:
Copyright © 2007 Distributed Management Task Force, Inc. (DMTF). All rights reserved.
Portions of this work are derived from "The Draft Standard C++ Library" Copyright © 1995 by P.J.
Plauger published by Prentice-Hall and are used with permission.
Portions of this software are based in part on the work of Hewlett-Packard Company. Because
Microsoft has included the Hewlett-Packard Company software in this product, Microsoft is
required to include the following text that accompanied such software:
Copyright © 2002, 2003 Hewlett-Packard Company.
About Notice:
This software is based on software available from mpvtools.sourceforge.net.
This software processes a format called MPV. MPV is an open specification for managing
collections and multimedia playlists of photo, video, and music content and associated
metadata and is available at no cost from the Optical Storage Technology Association.
More information about the MPV specification can be found at www.osta.org/mpv.
Quick Reference Guide
25
Permission Notice:
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice, this permission notice, and the above About Notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software without
prior written authorization of the copyright holder.
All other trademarks are property of their respective owners.
26
VC80 Vehicle Computer
MICROSOFT SOFTWARE LICENSE TERMS
WINDOWS 7 ULTIMATE FOR EMBEDDED SYSTEMS
WINDOWS 7 PROFESSIONAL FOR EMBEDDED SYSTEMS (ALL
VERSIONS)
These license terms are an agreement between you and Zebra Technologies Corp. Please read
them. They apply to the software included on this device. The software also includes any
separate media on which you received the software.
The software on this device includes software licensed from Microsoft Corporation or its affiliate.
The terms also apply to any Microsoft
• updates
• supplements
• Internet-based services
• support services
for this software, unless other terms accompany those items. If so, those terms apply.
If you obtain updates or supplements directly from Microsoft, then Microsoft, and not Zebra
Technologies Corp., licenses those to you.
As described below, using the software also operates as your consent to the
transmission of certain computer information for Internet-based services.
By using the software, you accept these terms. If you do not accept them, do not use the
software. Instead, contact Zebra Technologies Corp. to determine its return policy for a
refund or credit.
If you comply with these license terms, you have the rights below.
OVERVIEW.
a. Software. The software includes desktop operating system software. This software does
not include Windows Live services. Windows Live services are available from Microsoft
under a separate agreement.
2. USE RIGHTS.
a. Use. The software license is permanently assigned to the device with which you acquired
the software. That device is the "licensed device". You may use the software on the
licensed device.
b. Processor Limit. You may use the software with no more than two processors at any
one time.
c. Alternative Versions. You may only use the version of the software that is installed on
the licensed device. You may not change it to any other version (such as the 32-bit or
64-bit version, or another language version).
3. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS.
a. Specific Use. Zebra Technologies Corp. designed the licensed device for a specific use.
You may only use the software for that use.
b. Other Software. You may use other programs with the software as long as the other
programs
• directly support the specific use for the licensed device, or
• provide system utilities, resource management, or anti-virus or similar protection.
Software that provides consumer or business tasks or processes may not run on the
licensed device. This includes email, word processing, spreadsheet, database,
scheduling and personal finance software. The licensed device may use terminal services
protocols to access such software running on a server.
c. Device Connections. You may not use the software as server software. In other words,
more than one device may not access, display, run, share or use the software at the same
time. You may allow up to twenty other devices to access the software to use:
• File Services
• Print Services
1.
Quick Reference Guide
27
• Internet Information Services, and
• Internet Connection Sharing and Telephony Services.
The twenty connection limit applies to devices that access the software indirectly through
"multiplexing" or other software or hardware that pools connections. You may use
unlimited inbound connections at any time via TCP/IP.
d. Remote Access Technologies. You may access and use the software remotely from
another device using remote access technologies as follows.
Remote Desktop. The single primary user of the licensed device may access a session
from any other device using Remote Desktop or similar technologies. A "session" means
the experience of interacting with the software, directly or indirectly, through any
combination of input, output and display peripherals. Other users may access a session
from any device using these technologies, if the remote device is separately licensed to
run the software.
Other Access Technologies. You may use Remote Assistance or similar technologies to
share an active session.
Other Remote Uses. You may allow any number of devices to access the software for
purposes other than those described in the Device Connections and Remote Access
Technologies sections above, such as to synchronize data between devices.
e. Font Components. While the software is running, you may use its fonts to display and
print content. You may only:
• embed fonts in content as permitted by the embedding restrictions in the fonts; and
• temporarily download them to a printer or other output device to print content.
f. Icons, images and sounds. While the software is running, you may use but not share its
icons, images, sounds, and media.
4. POTENTIALLY UNWANTED SOFTWARE. The software includes Windows Defender. If
Windows Defender is turned on, it will search this device for "spyware," "adware" and other
potentially unwanted software. If it finds potentially unwanted software, the software will ask
you if you want to ignore, disable (quarantine) or remove it. Any potentially unwanted
software rated "high" or "severe," will be automatically removed after scanning unless you
change the default setting. Removing or disabling potentially unwanted software may result
in:
• other software on your computer ceasing to work, or
• your breaching a license to use other software on this device.
By using this software, it is possible that you will also remove or disable software that is not
potentially unwanted software.
5. SCOPE OF LICENSE. The software is licensed, not sold. This agreement only gives you
some rights to use the software. Zebra Technologies Corp. and Microsoft reserve all other
rights. Unless applicable law gives you more rights despite this limitation, you may use the
software only as expressly permitted in this agreement. In doing so, you must comply with
any technical limitations in the software that allow you to use it only in certain ways. For
more information, see the software documentation or contact Zebra Technologies Corp. You
may not:
• work around any technical limitations in the software;
• reverse engineer, decompile or disassemble the software;
• make more copies of the software than specified in this agreement;
• publish the software for others to copy;
• rent, lease or lend the software; or
• use the software for commercial software hosting services.
Except as expressly provided in this agreement, rights to access the software on this
device do not give you any right to implement Microsoft patents or other Microsoft
intellectual property in software or devices that access this device.
• INTERNET-BASED SERVICES. Microsoft provides Internet-based services with the
software. Microsoft may change or cancel them at any time.
28
VC80 Vehicle Computer
a.Consent for Internet-Based Services. The licensed device may contain one or more
of the software features described below. These features connect to Microsoft or service
provider computer systems over the Internet. In some cases, you will not receive a
separate notice when they connect. For more information about these features, visit:
go.microsoft.com/fwlink/?linkid=104604.
By using these features, you consent to the transmission of this information.
Microsoft does not use the information to identify or contact you.
Computer Information. The following features use Internet protocols, which send to the
appropriate systems computer information, such as your Internet protocol address, the
type of operating system and browser, and the name and version of the software you are
using. Microsoft uses this information to make the Internet-based services available to
you. Zebra Technologies Corp. has elected to turn on the following features in the
licensed device.
Plug and Play and Plug and Play Extensions. You may connect new hardware to
your device. Your device may not have the drivers needed to communicate with that
hardware. If so, the update feature of the software can obtain the correct driver from
Microsoft and install it on your device.
Web Content Features. Features in the software can retrieve related content from
Microsoft and provide it to you. Examples of these features are clip art, templates, online
training, online assistance and Appshelp. You may choose not to use these web content
features.
Digital Certificates. The software uses x.509 version 3 digital certificates. These
digital certificates confirm the identity of users sending information to each other and
allow you to encrypt the information. The software retrieves certificates and updates
certificate revocation lists over the Internet.
Auto Root Update. The Auto Root Update feature updates the list of trusted
certificate authorities. You can switch off this feature.
Windows Media Digital Rights Management. Content owners use Windows Media
digital rights management technology (WMDRM) to protect their intellectual property,
including copyrights. This software and third party software use WMDRM to play and
copy WMDRM-protected content. If the software fails to protect the content, content
owners may ask Microsoft to revoke the software's ability to use WMDRM to play or copy
protected content. evocation does not affect other content. When you download licenses
for protected content, you agree that Microsoft may include a revocation list with the
licenses. Content owners may require you to upgrade WMDRM to access their content.
Microsoft software that includes WMDRM will ask for your consent prior to the upgrade. If
you decline an upgrade, you will not be able to access content that requires the upgrade.
You may switch off WMDRM features that access the Internet. When these features are
off, you can still play content for which you have a valid license.
Windows Media Player. When you use Windows Media Player, it checks with
Microsoft for:
• compatible online music services in your region;
• new versions of the player; and
• codecs if your device does not have the correct ones for playing content.
For more information, go to: go.microsoft.com/fwlink/?linkid=104605.
Malicious Software Removal/Clean On Upgrade. Before installation of the software, the
software will check and remove certain malicious software listed at
www.support.microsoft.com/?kbid=890830 ("Malware") from your device. When the
software checks your device for Malware, a report will be sent to Microsoft about any
Malware detected or errors that occurred while the software was checking for Malware.
No information that can be used to identify you is included in the report.
Network Awareness. This feature determines whether a system is connected to a
network by either passive monitoring of network traffic or active DNS or HTTP queries.
The query only transfers standard TCP/IP or DNS information for routing purposes. You
Quick Reference Guide
29
can switch off the active query feature through a registry setting.
Windows Time Service. This service synchronizes with www.time.windows.com once
a week to provide your computer with the correct time. The connection uses standard
NTP protocol.
b. Use of Information. Microsoft may use the computer information, error reports, and
Malware reports to improve our software and services. We may also share it with others,
such as hardware and software vendors. They may use the information to improve how
their products run with Microsoft software.
c. Misuse of Internet-based Services. You may not use these services in any way that
could harm them or impair anyone else's use of them. You may not use the services to try
to gain unauthorized access to any service, data, account or network by any means.
6. VALIDATION.
a. Validation verifies that the software has been activated and is properly licensed. It also
verifies that no unauthorized changes have been made to the validation, licensing, or
activation functions of the software. Validation may also check for certain malicious or
unauthorized software related to such unauthorized changes. A validation check
confirming that you are properly licensed, permits you to continue to use the software,
certain features of the software or to obtain additional benefits. You are not permitted to
circumvent validation. This is to prevent unlicensed use of the software. For more
information, see go.microsoft.com/fwlink/?Linkid=104610.
b. The software will from time to time perform a validation check of the software. The check
may be initiated by the software or Microsoft. To enable the activation function and
validation checks, the software may from time to time require updates or additional
downloads of the validation, licensing or activation functions of the software. The updates
or downloads are required for the proper functioning of the software and may be
downloaded and installed without further notice to you. During or after a validation check,
the software may send information about the software, the computer and the results of
the validation check to Microsoft. This information includes, for example, the version and
product key of the software, any unauthorized changes made to the validation, licensing
or activation functions of the software, any related malicious or unauthorized software
found and the Internet protocol address of the computer. Microsoft does not use the
information to identify or contact you. By using the software, you consent to the
transmission of this information. For more information about validation and what is sent
during or after a validation check, see go.microsoft.com/fwlink/?Linkid=104611.
c. If, after a validation check, the software is found to be counterfeit, improperly licensed, or
a non-genuine Windows product, or if it includes unauthorized changes, then the
functionality and experience of using the software will be affected. For example:
Microsoft may
• repair the software, and remove, quarantine or disable any unauthorized changes that
may interfere with the proper use of the software, including circumvention of the
activation or validation functions of the software; or
• check and remove malicious or unauthorized software known to be related to such
unauthorized changes; or
• provide notice that the software is improperly licensed or a non-genuine Windows
product;
and you may:
• receive reminders to obtain a properly licensed copy of the software; or
• need to follow Microsoft's instructions to be licensed to use the software and
reactivate;
and you may not be able to:
• use or continue to use the software or some of the features of the software; or
• obtain certain updates or upgrades from Microsoft.
30
VC80 Vehicle Computer
d. You may only obtain updates or upgrades for the software from Microsoft or authorized
7.
8.
9.
10.
11.
12.
13.
14.
sources (including Zebra Technologies Corp.). For more information on obtaining updates
from authorized sources see go.microsoft.com/fwlink/?Linkid=104612.
PRODUCT SUPPORT. Contact Zebra Technologies Corp. for support options. Refer to the
support number provided with the device.
MICROSOFT .NET BENCHMARK TESTING. The software includes one or more
components of the .NET Framework (".NET Components"). You may conduct internal
benchmark testing of those components. You may disclose the results of any benchmark
test of those components, provided that you comply with the conditions set forth at
go.microsoft.com/fwlink/?LinkID=66406.
Notwithstanding any other agreement you may have with Microsoft, if you disclose such
benchmark test results, Microsoft shall have the right to disclose the results of benchmark
tests it conducts of your products that compete with the applicable .NET Component,
provided it complies with the same conditions set forth at
go.microsoft.com/fwlink/?LinkID=66406.
BACKUP COPY. You may make one backup copy of the software. You may use it only to
reinstall the software on the device.
DOCUMENTATION. Any person that has valid access to your computer or internal network
may copy and use the documentation for your internal, reference purposes.
UPGRADES. To use upgrade software, you must first be licensed for the software that is
eligible for the upgrade. Upon upgrade, this agreement takes the place of the agreement for
the software you upgraded from. After you upgrade, you may no longer use the software
you upgraded from.
PROOF OF LICENSE. If you acquired the software on the device, or on a disc or other
media, a genuine Certificate of Authenticity label with a genuine copy of the software
identifies licensed software. To be valid, this label must be affixed to the device, or included
on or in Zebra Technologies Corp.'s software packaging. If you receive the label separately,
it is not valid. You should keep the label on the device or packaging to prove that you are
licensed to use the software. To identify genuine Microsoft software, see
http://www.howtotell.com.
TRANSFER TO A THIRD PARTY. You may transfer the software only with the device, the
Certificate of Authenticity label, and these license terms directly to a third party. Before the
transfer, that party must agree that these license terms apply to the transfer and use of the
software. You may not retain any copies of the software including the backup copy.
NOTICE ABOUT THE H.264/AVC VISUAL STANDARD, THE VC-1 VIDEO STANDARD,
THE MPEG-4 VISUAL STANDARD AND THE MPEG-2 VIDEO STANDARD. This software
may include H.264/AVC, VC-1, MPEG-4 Part 2, and MPEG-2 visual compression
technology. If the software includes those visual compression technologies MPEG LA,
L.L.C. requires this notice:
THIS PRODUCT IS LICENSED UNDER ONE OR MORE VIDEO PATENT PORTFOLIO
LICENSES SUCH AS, AND WITHOUT LIMITATION, THE AVC, THE VC-1, THE MPEG-4
PART 2 VISUAL, AND THE MPEG 2 VIDEO PATENT PORTFOLIO LICENSES FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO STANDARDS") AND/OR (ii)
DECODE VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL
AND NON-COMMERCIAL ACTIVITY OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE VIDEO UNDER SUCH PATENT PORTFOLIO LICENSES.
NONE OF THE LICENSES EXTEND TO ANY OTHER PRODUCT REGARDLESS OF
WHETHER SUCH PRODUCT IS INCLUDED WITH THIS PRODUCT IN A SINGLE
ARTICLE. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
WWW.MPEGLA.COM.
Quick Reference Guide
31
15. NOT FAULT TOLERANT. The software is not fault tolerant. Zebra Technologies Corp.
installed the software on the device and is responsible for how it operates on the
device.
16. RESTRICTED USE. The Microsoft software was designed for systems that do not require
fail-safe performance. You may not use the Microsoft software in any device or system in
which a malfunction of the software would result in foreseeable risk of injury or death to any
person. This includes operation of nuclear facilities, aircraft navigation or communication
systems and air traffic control.
17. THIRD PARTY PROGRAMS. The software contains third party programs. The license
terms with those programs apply to your use of them.
18. NO WARRANTIES FOR THE SOFTWARE. The software is provided "as is". You bear
all risks of using it. Microsoft gives no express warranties, guarantees or conditions.
Any warranties you receive regarding the device or the software do not originate
from, and are not binding on, Microsoft or its affiliates. When allowed by your local
laws, Zebra Technologies Corp. and Microsoft exclude implied warranties of
merchantability, fitness for a particular purpose and non-infringement.
19. LIABILITY LIMITATIONS. You can recover from Microsoft and its affiliates only direct
damages up to two hundred fifty U.S. Dollars (U.S. $250.00), or equivalent in local
currency. You cannot recover any other damages, including consequential, lost
profits, special, indirect or incidental damages.
This limitation applies to:
•anything related to the software, services, content (including code) on third party
internet sites, or third party programs, and
•claims for breach of contract, breach of warranty, guarantee or condition,
strict liability, negligence, or other tort to the extent permitted by applicable law.
It also applies even if Microsoft should have been aware of the possibility of the
damages. The above limitation may not apply to you because your country may not
allow the exclusion or limitation of incidental, consequential or other damages.
20. EXPORT RESTRICTIONS. The software is subject to United States export laws and
regulations. You must comply with all domestic and international export laws and
regulations that apply to the software. These laws include restrictions on destinations, end
users and end use. For additional information, see www.microsoft.com/exporting.
21. ENTIRE AGREEMENT. This agreement, additional terms (including any printed-paper
license terms that accompany the software and may modify or replace some or all of these
terms), and the terms for supplements, updates, Internet-based services and support
services that you use, are the entire agreement for the software and support services.
22. APPLICABLE LAW.
a. United States. If you acquired the software in the United States, Washington state law
governs the interpretation of this agreement and applies to claims for breach of it,
regardless of conflict of laws principles. The laws of the state where you live govern all
other claims, including claims under state consumer protection laws, unfair competition
laws, and in tort.
b. Outside the United States. If you acquired the software in any other country, the laws
of that country apply.
32
VC80 Vehicle Computer
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to Model Number VC80.
All Zebra devices are designed to be compliant with the rules and regulations in the locations
they are sold and will be labeled as required.
Local language translations are available at the following website: www.zebra.com/support.
Any changes or modifications to Zebra equipment not expressly approved by Zebra could
void the user's authority to operate the equipment.
CAUTION Only use Zebra approved and UL Listed accessories, battery packs and
battery chargers.
Do NOT attempt to charge damp/wet mobile computers or batteries. All
components must be dry before connecting to an external power source.
Declared maximum operating temperature: 50°C.
Bluetooth®
Wireless Technology
®
This is an approved Bluetooth product. For more information or to view the End Product
Listing, please visit http://www.bluetooth.org/tpg/listings.cfm.
Wireless Devices Country Approvals
Note: This section is only applicable to WW/WR/EU configurations.
Regulatory markings subject to certification are applied to the device signifying the radio(s)
is/are approved for use in the following countries and continents: United States, Canada,
Japan, China, South Korea, Australia, and Europe.
Please refer to the Declaration of Conformity (DoC) for details of other country markings. This
is available at: http://www.zebra.com/doc.
Note: Europe includes Austria, Belgium, Bulgaria, Croatia, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.
CAUTION Operation of the device without regulatory approval is illegal.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d) which will ensure
the product operates on the correct channels for the particular country of use.
Ad-Hoc Operation (2.4 GHz Band)
Ad-Hoc operation is limited to Channels 1-11 (2412 - 2462 MHz).
Quick Reference Guide
33
Frequency of Operation - FCC and IC
5 GHz Only:
The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250 MHz)
is restricted to Indoor Use Only; any other use will make the operation of this device illegal.
Industry Canada Statement:
CAUTION The device for the band 5150-5250 MHz is only for indoor usage to
reduce potential for harmful interference to co-Channel mobile satellite
systems. High power radars are allocated as primary users (meaning
they have priority) of 5250-5350 MHz and 5650-5850 MHz and these
radars could cause interference and/or damage to LE-LAN devices.
CAUTION Avertissement: Le dispositive fonctionnant dans la bande 5150-5250
MHz est réservé uniquement pour une utilisation à l'intérieur afin de
réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux. Les utilisateurs de radars de haute
puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la
priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces
radars pourraient causer du brouillage et/ou des dommages aux
dispositifs LAN-EL.
2.4 GHz Only:
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of
channels is limited by firmware.
Health and Safety Recommendations
Ergonomic Recommendations
CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow
the recommendations below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your company’s safety
programs to prevent employee injury.
•
•
•
•
•
•
•
•
•
•
•
Reduce or eliminate repetitive motion
Maintain a neutral postures
Reduce or eliminate excessive force
Keep objects that are used frequently within easy reach
Perform tasks at correct heights
Reduce or eliminate vibration
Reduce or eliminate direct pressure
Provide adjustable workstations
Provide adequate clearance
Provide a suitable working environment
Improve work procedures.
34
VC80 Vehicle Computer
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles (including safety systems). Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer about any equipment that
has been added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including either installed or
portable wireless equipment, in the area over the air bag or in the air bag deployment area. If
in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury
could result.
Position the device within easy reach. Be able to access the device without removing your
eyes from the road.
Note: Connection to an alert device that will cause a vehicle horn to sound or lights to flash on
receipt of a call on public roads is not permitted.
IMPORTANT: Before installing or using, check state and local laws regarding windshield
mounting and use of equipment.
For Safe installation
•
Do not put your phone in a location that obstructs the drivers vision or interferes with the
operation of the Vehicle.
•
Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a 'to do' list or flipping through
your address book takes attention away from your primary responsibility; driving safely.
When driving a car, driving is your first responsibility - Give your full attention to driving. Check
the laws and regulations on the use of wireless devices in the areas where you drive. Always
obey them.
When using a wireless device behind the wheel of a car, practice good common sense and
remember the following tips:
1. Get to know your wireless device and any features such as speed dial and redial. If
available, these features help you to place your call without taking your attention off the
road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if necessary, suspend the call
in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy
traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or
before pulling into traffic. Try to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check the road and your mirrors, then
continue.
5. Do not engage in stressful or emotional conversations that may be distracting. Make
people you are talking with aware you are driving and suspend conversations that have
the potential to divert your attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US,
and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident,
or medical emergencies. Remember, it is a free call on your wireless phone! The call can
be made regardless of any security codes and depending on a network; with or without a
SIM card inserted.
Quick Reference Guide
7.
8.
35
Use your wireless phone to help others in emergencies. If you see an auto accident,
crime in progress, or other serious emergency where lives are in danger, call the
Emergency Services (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency
number as you would want others to do for you.
Call roadside assistance or a special non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one appears injured, or a vehicle you know to be
stolen, call roadside assistance or other special non-emergency wireless number.
"The wireless industry reminds you to use your device / phone safely when driving".
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices.
Potentially Hazardous Atmospheres - Vehicles Use
You are reminded of the need to observe restrictions on the use of radio devices in fuel
depots, chemical plants, etc. and areas where the air contains chemicals or particles such as
grain, dust, or metal powders and any other area where you would normally be advised to turn
off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or airline staff.
If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained
between a handheld wireless device and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with independent research and
recommendations by Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when
turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimize the potential for interference.
• If you have any reason to suspect that interference is taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if the
operation of your wireless product may interfere with the medical device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
36
VC80 Vehicle Computer
International
The device complies with internationally recognized standards covering human exposure to
electromagnetic fields from radio devices. For information on “International” human exposure
to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at
http://www.zebra.com/doc.
For further information on the safety of RF energy from wireless devices, refer to
http://responsibility.zebra.com/index.php/downloads/, which is located under Wireless
Communications and Health.
Europe
Remote and Standalone Antenna Configurations
To comply with EU RF exposure requirements, antennas that are mounted externally at
remote locations or operating near users at stand-alone desktop of similar configurations
must operate with a minimum separation distance of 20cm from all persons.
US and Canada
Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other
transmitter/antenna except those already approved in this filing.
Industry Canada Statement:
IMPORTANT NOTE: (For mobile device use)
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Remote and Standalone Antenna Configurations
To comply with FCC RF exposure requirements, antennas that are mounted externally at
remote locations or operating near users at stand-alone desktop of similar configurations
must operate with a minimum separation distance of 20 cm from all persons.
To satisfy FCC RF exposure requirements, a mobile transmitting device must operate with a
minimum separation distance of 20 cm or more from a person's body.
Power Supply
Use ONLY a Zebra approved UL LISTED ITE (IEC/EN 60950-1) power supply with electrical
ratings: Output 24Vdc, min 6.25A, with a maximum ambient temperature of at least 40
degrees C. Use of alternative power supply will invalidate any approvals given to this unit and
may be dangerous.
Quick Reference Guide
37
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration) requires dry battery
producing or importing firms in accordance with Article 15 of the Waste
Disposal Act are required to indicate the recycling marks on the
batteries used in sales, giveaway or promotion. Contact a qualified
Taiwanese recycler for proper battery disposal.
Battery Information
CAUTION Risk of explosion if battery is replaced by an incorrect type.
Dispose of batteries according to instructions.
Use only approved batteries. Accessories which have battery charging capability are
approved for use with the following battery models:
Part Number BT000254A01 (12.6 Vdc, 2000 mAh).
Zebra approved rechargeable battery packs are designed and constructed to the highest
standards within the industry.
However, there are limitations as to how long a battery can operate or be stored before
needing replacement. Many factors affect the actual life cycle of a battery pack such as heat,
cold, harsh environmental conditions, and severe drops.
When batteries are stored over six months, some irreversible deterioration in overall battery
quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the
equipment to prevent loss of capacity, rusting of metallic parts, and electrolyte leakage. When
storing batteries for one year or longer, the charge level should be verified at least once a year
and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Zebra batteries is 30 days, regardless if the battery was
purchased separately or included as part of the mobile computer or bar code scanner. For
more information on Zebra batteries, please visit: http://www.zebra.com/batterybasics.
Battery Safety Guidelines
The area in which the units are charged should be clear of debris and combustible materials
or chemicals. Particular care should be taken where the device is charged in a
non-commercial environment.
• Follow battery usage, storage, and charging guidelines found in the user's guide.
• Improper battery use may result in a fire, explosion, or other hazard.
• To charge the mobile device battery, the battery and charger temperatures must be
between +32 ºF and +113 ºF (0 ºC and +45 ºC).
• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger
may present a risk of fire, explosion, leakage, or other hazard. If you have any questions
about the compatibility of a battery or a charger, contact Zebra support.
• Do not disassemble or open, crush, bend or deform, puncture, or shred.
• Severe impact from dropping any battery-operated device on a hard surface could cause
the battery to overheat.
• Do not short circuit a battery or allow metallic or conductive objects to contact the battery
terminals.
38
•
•
•
•
•
•
•
•
VC80 Vehicle Computer
Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse
or expose to water or other liquids, or expose to fire, explosion, or other hazard.
Do not leave or store the equipment in or near areas that might get very hot, such as in a
parked vehicle or near a radiator or other heat source. Do not place battery into a
microwave oven or dryer.
Battery usage by children should be supervised.
Please follow local regulations to promptly dispose of used re-chargeable batteries.
Do not dispose of batteries in fire.
Seek medical advice immediately if a battery has been swallowed.
In the event of a battery leak, do not allow the liquid to come in contact with the skin or
eyes. If contact has been made, wash the affected area with large amounts of water and
seek medical advice.
If you suspect damage to your equipment or battery, contact Zebra support to arrange for
inspection.
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The use of 5 GHz WLAN's, for use in the US, have the following restrictions
•
Notched Band 5.60 - 5.65 GHz
Radio Frequency Interference Requirements - Canada
CAN ICES-3 (B)/NMB-3(B)
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:
• Restricted Band 5.60 - 5.65 GHz
This device is in compliance with the NRC for Industry Canada applicable to license-exempt
radios. Use is allowed with the following two conditions: (1) the device must not produce
interference, and (2) the device must accept any interference to the radio, even if the
interference is likely to compromise operation.
Quick Reference Guide
39
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
IC - Label Marking: The Term “IC:” before the radio certification only signifies that Industry
Canada technical specifications were met.
In accordance with the regulations of Industry Canada, this radio transmitter can operate with
an antenna of a type and a maximum gain (or lower) approved for the transmitter by Industry
Canada. With the aim of reducing the risk of radio interference to other users, the chosen
antenna type and it gain should be selected so that the equivalent isotropically radiated power
(e.i.r.p.) does not exceed the intensity necessary for the establishment of a satisfactory
connection.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radio
électrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de
sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
This radio transmitter has been approved by Industry Canada to operate with the antenna
types listed below and having a maximum gain allowable and the impedance required for
each type of antenna. The antenna types not included in this list, or whose gain is higher than
the maximum gain indicates, are strictly prohibited for the operation of the transmitter.
Dipole
Mono-Pole
Patch
2 / 3.7 dBi [2.4 / 5GHz]
5 / 2 dBi[2.4 / 5GHz]
5 / 5 dBi[2.4 / 5GHz]
External Antenna
External Antenna
Internal Antenna
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son
numérode modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie
Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain
admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne
non inclus dans cette liste ou dont le gain est supérieur au gain maximal indiqué, sont
strictement interdits pour l'exploitation de l'émetteur.
Marking and European Economic Area (EEA)
The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835
GHz
Bluetooth® Wireless Technology for use through the EEA has the following restrictions:
• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835
GHz
40
VC80 Vehicle Computer
Statement of Compliance
Zebra hereby declares that this device is in compliance with the essential requirements and
other relevant provisions of Directives 1999/5/EC, 2004/108/EC, 2006/95/EC, and
2011/65/EU. A Declaration of Conformities may be obtained from http://www.zebra.com/doc.
Waste Electrical and Electronic Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be returned to Zebra for
recycling. For information on how to return product, please go to: http://www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits,
consultez : http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra
al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo
devolver un producto, visite: http://www.zebra.com/weee.
Български: За клиенти от ЕС: След края на полезния им живот всички продукти трябва
да се връщат на Zebra за рециклиране. За информация относно връщането на
продукти, моля отидете на адрес: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer
zum Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von
Produkten finden Sie unter http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita
devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle
modalità di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à
Zebra para reciclagem. Para obter informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur
naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee
voor meer informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naleźy zwrócić
do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajdują się na
stronie internetowej http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit
spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové
stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise
eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun
aadressi: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a http://www.zebra.com/weee weboldalra.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till
Zebra för återvinning. Information om hur du returnerar produkten finns på
http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi
Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on
osoitteessa http://www.zebra.com/weee.
Quick Reference Guide
41
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er
udtjent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει
να επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο
Διαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom,
iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna
l-prodott, jekk jogħġbok żur: http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare,
trebuie returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului,
accesaţi: http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju
Zebra za reciklažo. Za informacije o vračilu izdelka obiščite: http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich
životnosti vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov
nájdete na: http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti
utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ
Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu,
skatiet: http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya
iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.
TURKISH WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur
Japan (VCCI) - Voluntary Control Council for Interference
Class B ITE
Korea Warning Statement for Class B ITE
Other Countries
Australia
Use of 5 GHz RLAN's in Australia is restricted in the following band 5.50 - 5.65GHz.
42
VC80 Vehicle Computer
Brazil (UNWANTED EMISSIONS - ALL PRODUCTS)
Regulatory declarations for VC80 - BRAZIL
For more information consult the website www.anatel.gov.br
Declarações Regulamentares para VC80 - Brazil
Nota: A marca de certificação se aplica ao Transceptor, modelo VC80. Este equipamento
opera em caráter secundário, isto é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas
operando em caráter primário.
Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência
a sistemas operando em caráter primário.
Chile
Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de
telecomunicaciones, relativa a radiaciones electromagnéticas
China
www.zebra.com/contact
Hong Kong
In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for indoor operation only.
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que
este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo
debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no
deseada.
South Korea
For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two
expression should be displayed:
Quick Reference Guide
43
Taiwan
Ukraine
Thailand
China RoHS
This table was created to comply with China RoHS requirements.
ᴿᇩ⢟䍞
䜞Ԭ੃〦
(Parts)
20
•
䫻
(Pb)
⊔
(Hg)
䭿
(Cd)
(Cr (VI))
ཐ⓪㚊㤥
(PBB)
ཐ⓪ӂ㤥䟐
(PBDE)
䠇ኔ䜞Ԭ
(Metal Parts)
O
O
O
O
O
O
⭫䐥⁗ඍ
(Circuit Modules)
X
O
X
O
O
O
⭫㔼਀⭫㔼㓺Ԭ
(Cables and Cable Assemblies)
O
O
O
O
O
O
ງᯏૂ㚐ਾ⢟䜞Ԭ
(Plastic and Polymeric Parts)
O
O
O
O
O
O
‫ݿ‬ᆜૂ‫ݿ‬ᆜ㓺Ԭ
(Optics and Optical Components)
O
O
O
O
O
O
⭫⊖
(Batteries)
X
O
O
O
O
O
ᵢ㺞Ṳ‫ᦤד‬6-7Ⲻ㿺ᇐ㕌࡬Ⱦ
2 㺞⽰䈛ᴿᇩ⢟䍞൞䈛䜞Ԭᡶᴿൽ䍞ᶆᯏѣⲺ੡䠅ൽ൞6-7㿺ᇐⲺ䲆䠅
㾷≸ԛсȾ
; 㺞⽰䈛ᴿᇩ⢟䍞㠩ቇ൞䈛䜞ԬⲺḆжൽ䍞ᶆᯏѣⲺ੡䠅䎻࠰6-7㿺ᇐ
Ⲻ䲆䠅㾷≸ȾԷѐਥ൞↚༺θṯᦤᇔ䱻᛻߫ሯр㺞ѣᢉćhĈⲺᢶᵥ৕ഖ䘑
㺂䘑ж↛䈪᱄Ⱦε
This table was created to comply with China RoHS requirements.
Zebra Technologies Corporation
Lincolnshire, Illinois 60069 USA
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in
many jurisdictions worldwide. All other trademarks are the property of their
respective owners.
© 2015 Zebra Technologies Corporation.
MN002383A01 Rev. A - December 2015
">