advertisement
PR E CI S I ON lOCatOR S
RD8100 ™ Locator Specification
RD8100 Locator Specification
1. Product Summary
1.1 Product Descriptions:
1.2 Intended Use:
1.3 Standard Equipment:
Multi-purpose Precision Locator
Cable and Pipe Locator
Locate System Receiver
Multi-function Precision Locator
Locating the position / path of buried pipes and cables
Detecting and pinpointing insulation faults on buried pipes and cables
Creating survey records of buried pipes and cable locations
Locator
Quickstart guide
Mini USB 2.0 compliant data cable
2. Performance
2.1 Sensitivity:
2.2 Dynamic range:
2.3 Selectivity:
2.4 Depth measurement precision 1 : ± 3%
2.5 Locate accuracy: ± 5% of depth
2.6 Active Locate filter bandwidth:
2.7 Start-up time:
2.8 Maximum depth readout 2 :
6E-15 Tesla
5µA at 1 meter (33kHz)
140dB rms/√Hz
120dB/Hz
± 3Hz, 0 < 1kHz
± 10Hz, ≥ 1kHz
<1 second
Metric: Cable / Pipe: 30m Sonde: 19.5m
Imperial: Cable / Pipe: 98' Sonde: 64'
3. Locate Functions
3.1 Active Locate Modes:
3.2 Gain control
3.3 Custom locate frequencies
Five:
• Peak
• Peak+ ™ (choice of combined Peak & Guidance or Peak & Null)
• Guidance
• Broad Peak ™
• Null
Guidance Mode: Automatic
Other modes: Manual gain using “+” or “-“ with one touch to return to center (50% of Full Scale)
Up to 5 additional frequencies in the range 50Hz to 1kHz at 1Hz resolution
3.4 Active locate frequencies:
3.5 Sonde Frequencies:
3.6 Fault Find:
3.7 Current Direction
(CD) Signal Pairs:
™
Up to 24:
R D 8100 M OD E l
Custom frequencies
ELF (98/128Hz)
512Hz
570Hz
577Hz
640Hz
760Hz
870Hz
920Hz
940Hz
1090Hz
1450Hz
4kHz (4096Hz)
8kHz (8192Hz)
8440Hz
9.8kHz (9820Hz)
33kHz (32768Hz)
65kHz (65536Hz)
82kHz (82000Hz)
83kHz (83077Hz)
131kHz (131072Hz)
200kHz (200000Hz)
All models: Four
• 512Hz
• 640Hz
• 8kHz (8192Hz)
• 33kHz (32768Hz)
PX l
5
●
●
●
●
●
●
●
●
●
●
●
PX lG
5
●
●
●
●
●
●
●
●
●
●
●
PD l
●
●
●
●
●
●
5
●
●
●
●
●
●
●
●
●
●
PD lG
●
●
●
●
●
●
5
●
●
●
●
●
●
●
●
●
●
Ptl
●
●
●
●
●
●
●
●
●
●
●
●
●
●
5
●
●
●
●
●
Locate insulation sheath faults on pipes and cables to 10cm / 4" accuracy using the accessory
A-Frame and a compatible transmitter
PtlG
●
●
●
●
●
5
●
●
●
●
●
●
●
●
●
●
●
●
●
●
R D 8100 M OD E l
8kHz Fault Find
CD Fault Find
PX l PX lG PD l
●
●
PD lG
●
●
Ptl
●
●
PtlG
●
●
Confirm operator is following the target pipe or cable with CD arrows and a compatible transmitter
R D 8100 M OD E l
219.9Hz / 439.8Hz
256Hz / 512Hz
280Hz / 560Hz
285Hz / 570Hz
320Hz / 640Hz
380Hz / 760Hz
460Hz / 920Hz
680Hz / 340Hz
800Hz / 400Hz
920Hz / 460Hz
968Hz / 484Hz
1168Hz / 584Hz
1248Hz / 624Hz
4096Hz /8192Hz 4kCD
PX l PX lG PD l
●
●
●
●
●
●
PD lG
●
●
●
●
●
●
●
●
●
●
●
●
●
Ptl
●
●
●
●
●
●
PtlG
●
●
●
●
●
●
●
●
●
●
●
●
●
3.8 Passive Locate Modes:
3.9 Power Filters ™ function:
3.10 Information displayed:
3.11 Audio output tones:
3.12 Accessory locate functions:
R D 8100 M OD E l PX l PX lG PD l PD lG Ptl PtlG
Power
Radio
CPS (Cathodic
Protection System)
CATV (Cable TV)
Passive Avoidance
(Combined Power +
Radio)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Switch out of sensitive Power Mode to locate on any of 5 individual mains harmonic frequencies:
●
●
HaR M ON I C 50 Hz regions 60 Hz regions
Primary
3rd
5th
7th
9th
50 Hz
150 Hz
250 Hz
350 Hz
450 Hz
60 Hz
180 Hz
300 Hz
420 Hz
540 Hz
• Signal strength - moving bar graph and numeric value
• Mode indication
(Peak, Null, Guidance, Broad Peak, Peak+ with option of Guidance arrows or Null arrows)
• Line or Sonde locate type
• Proportional left/right indication
• Compass: full 360° line direction indicator
• Accessories in use indication
• Accessory specific custom screen
• Depth and current readout (Line location)
• Depth readout (Sonde location)
• Gain level (in dB)
• Frequency selected
• Battery condition
• Speaker volume
• Operating frequency
• Bluetooth status
• GPS satellites in view (where fitted)
• GPS status (where fitted)
• Configuration menu and submenus
• Software version
• Last calibration date
• Survey measurement counter
• Current Direction mode indicator
• Current Direction arrows
• Fault Find mode indicator
• Transmitter communication status
• Transmitter standby status
• StrikeAlert ™ warning
• Overload warning
Power / Passive avoidance / Radio modes:
Real Sound ™ derived from detected electromagnetic signal
Peak / Peak+ modes and CPS / CatV modes:
Synthesized audio tone proportional to signal strength
Guidance mode:
Continuous tone when locator is to the left of target, intermittent tone when to the right of target
Null mode:
Synthesized Audio tone proportional to signal strength. Low pitch to left of target, high pitch to right of target
StrikeAlert audio warning:
Audio feedback for menu navigation
locator clamps: Used to identify individual target cable(s) in a bundle or cabinet using signal strength read-out
Stethoscopes: Used to identify individual target cable(s) in a bundle or confined space such as a cabinet using signal strength read-out
CD / CM clamp: Used to measure locate current and to confirm target cable using Current Direction
4. Locate Function Enhancements
4.1 StrikeAlert:
4.2 Dynamic Overload Protection ™ :
4.3 Current Direction ™ (CD):
4.4 iLOC ™ :
4.5 SideStep ™ :
4.6 Simultaneous depth and current readout:
4.7 Survey Measurements:
4.8 Fault Find:
4.9 4kHz locate frequency and 4kHz CD:
4.10 Peak+ mode:
Audio and visual warning when a cable or pipe less than 30cm deep is detected. Operates in Active and Passive locating modes
40dB, automatic
• Automatically manages the system gain to compensate for strong signals e.g. from mains power or substations, to enable accurate locating
• Measures the direction of current flowing in buried pipes or cables to ensure that an operator is able to identify and follow the target utility
• Provides operator with arrows indicating the direction of current flowing in the located pipe or cable to confirm that they are following the target utility
Metric: Remote transmitter control from up to 450m away 3
Imperial: Remote transmitter control from up to 1400' away 3
Control transmitter frequency, power level and SideStep
Enables locating where other signals are interfering, and without compromising the optimum locate frequency
Remotely shifts the locate and transmitter frequency by several Hz, out of the bandwidth of other locate signals that may be interfering with the locate
Both utility depth and locate signal current are displayed simultaneously, giving the operator more information to help them to follow the target utility
Store up to 1,000 survey points within the locator, and append GPS data from internal GPS (if fitted) or external GNSS sources over Bluetooth ®
Export data immediately or as a batch over Bluetooth
Apply a Fault Find signal with a Tx-5 and Tx-10 transmitter, then use an accessory A-Frame to detect and pinpoint insulation faults
Fault find accuracy:
Metric: 100mm
Imperial: 4"
Designed for tracing higher impedance lines such as twisted pair telecoms or street lighting over distance
Combine with Current Direction to help trace the target utility through dense or complex infrastructure
Use the accurate Peak bargraph, and add either proportional Guidance arrows for faster locating, or
Null arrows to check for the presence of distortion
Faster surveying using integrated GPS – no need for a separate hand-held device 4.11 Integrated GPS option:
5. Configurability
5.1 Option selection:
5.2 Languages supported:
5.3 Mains power network options:
5.4 Mode selection:
5.5 Active frequency selection:
5.6 Passive mode selection:
5.7 StrikeAlert:
5.8 Peak+ arrow selection:
All options can be enabled or disabled on the locator or using the RD Manager PC software
Fourteen: English, French, German, Dutch, Polish, Czech, Slovakian, Spanish, Portuguese, Swedish,
Italian, Turkish, Russian, Hungarian
50 Hz or 60 Hz
All locate modes with the exception of Peak Mode can be individually enabled or disabled
All active frequencies available can be individually enabled or disabled
All passive modes can be individually enabled or disabled
Enable / disable
Guidance arrows or Null arrows
Selected using the locator menu or with a long press of the antenna key
5.9 GNSS (‘GPS’) settings: Internal / External (connect over Bluetooth) / Off / Reset
SBAS On / Off
5.10 Bluetooth: On / Off
5.11 Data export protocols supported: PPP / choice of 3 ASCII formats. Optionally append positional data
5.12 Time / date setting:
5.13 CD Reset:
Correct or update locator real-time clock using the RD Manager PC software or GNSS signals
Reset CD phase analysis with a single long press of the frequency key
6. Connectivity
6.1 Wireless connections:
6.2 iLOC ™ remote transmitter control range 3 :
6.3 iLOC remote transmitter control functions:
6.4 Wired connections
Bluetooth class 1
Metric: Up to 450m
Imperial: Up to 1400'
Set transmitter frequency
Set transmitter power output level
Transmitter standby
SideStep
Mini-USB: Connect to a PC to configure and update locator, and to retrieve usage log and survey measurement data
3.5mm Stereo jack: Connect wired headphones
accessory port: Connect Radiodetection accessories
7. Data capabilities and GNSS (‘GPS’)
7.1 On-board GNSS (‘GPS’) module option:
7.2 Link to external GNSS (‘GPS’):
7.3 External GNSS position read-in to locator memory:
7.4 Survey measurement capacity:
7.5 Survey measurement data captured:
GNSS data automatically added to Survey Measurements every time locate data is saved, and every second on usage-logging data
Accurate to 3m CEP with SBAS enhancement available
Links to GPS, GLONASS and Galileo networks
Positional data enhancement systems (where available)
• WAAS – North America
• EGNOS – Europe
• MSAS – Japan
• SBAS (satellite based augmentation system)
SBAS can be enabled or disabled in locator menu
Over Bluetooth
• Connect to an external GNSS enabled device to combine survey measurements with that device’s
GNSS data on the external device
Over Bluetooth from compatible mobile device / PDA running the SurveyCert+ ™ app.
• Connect to an external GNSS device to read positional positioning from that device and combine with the locator’s survey measurement data on board the locator
Up to 1,000 data records
Standard data:
Log #
Survey Reference
Antenna Mode
Depth
Current (mA)
Frequency in use (Hz)
Sonde/Line
Signal Strength (dB ųV and %)
Signal Strength (%)
Gain Setting (dB)
Compass (deg)
Arrow readout
CD Phase (deg)
Accessory Type
Battery level
Volume
Overload Flag
Usage-logging Units:
Date and Time
With Internal or External GNSS Fix:
GPS Mode
GPS Date and Time
GPS Distance (m)
Latitude Angle (deg)
Latitude Direction
Longitude Angle (deg)
Longitude Direction
GPS Fix
Satellites in use
Horizontal Dilution
Altitude Value (m)
Altitude Units
Geoid Value (m) and Units
DGPS Time
DGPS ID
Time Reference
GPS Mode
GPS Date and Time
GPS Distance (m)
Latitude Angle (deg)
7.6 Survey measurement export options:
7.7 Bluetooth survey measurement data protocol options:
Bluetooth – ‘live,’ per measurement
Bluetooth – batch export
USB – selectable / batch export
PPP
ASCII (choice of 3 formats)
Optional GPS data appended
7.8 Usage-logging and GNSS
(‘GPS’):
7.9 Usage-logging memory:
7.10 Usage-logging capacity:
7.11 Usage-logging capture rate:
7.12 Usage parameters logged:
R D 8100 M OD E l
Usage-logging
On-board GNSS (‘GPS’)
4 GB
PX l PX lG
●
●
PD l
Over 500 days, measured at 8 hours use per day
1/ second
Serial number
Log reference and id
Operating mode
Locate frequency
Sonde/line
Signal strength
Gain setting
Depth
Current
Accessory in use
Antenna mode
Arrows readout
Compass angle
CD phase
Overload status
Dynamic Overload Protection
Status
Keys pressed
Audio status
Volume
Menu in use
Battery status
User warnings status
StrikeAlert status
Bluetooth status
Fault find arrow
Sidestep status
Language
Depth units
Power setting
Compass setting
CD reset status logging Units:
Date and time
8. Power options
PD lG
●
●
Ptl
With a GNSS fix:
Latitude
Longitude
Altitude
GNSS mode
GNSS date and time
Horizontal Dilution
Geoid
DGPS Time and ID
Geoid Units
GNSS fix
Number of satellites
Altitude units
Time reference
8.1 Alkaline battery options:
8.2 Rechargeable battery options:
8.3 Battery run-time (continuous) 4 :
2 × D-Cell (MN1300 / LR20) alkaline batteries (standard)
Custom Lithium-Ion (Li-Ion) battery pack
2 × D-Cell (MN1300 / LR20) Nickel Metal Hydride (NiMH) batteries
Li-Ion pack: 35 hours
2 × Alkaline D-Cells 13 hours
8.4 Battery chemistry identification: Lithium-Ion pack: Automatic sensing
NiMH / Alkaline: Software switchable
8.5 Charging options (Li-Ion pack):
8.6 Charging time (Li-Ion pack):
Mains charger: 100-250 Volts AC, 50/60 Hz
Automotive charger: 12-24V DC
3 hours to 80% from empty with maintenance trickle charging thereafter
9. Physical Characteristics
9.1 Design:
9.2 Construction:
9.3 Weight:
Ergonomic, balanced and lightweight design for comfortable use during extended surveys
Injection Molded ABS Plastic
With lithium-Ion battery pack fitted:
Metric: 1.8kg
Imperial: 4.0lb
With D-cell alkaline batteries fitted:
Metric: 1.9kg
Imperial: 4.2lb
PtlG
●
●
9.4 Ingress Protection rating:
9.5 Display type:
9.6 Audio options:
9.7 Operating temperature 6 :
9.8 Storage temperature:
9.9 Unit dimensions:
9.10 Shipping dimensions:
9.11 Shipping weight
(with batteries fitted):
IP65
Protected against dust ingress and jets of water 5 applied from any direction
High contrast custom made monochrome LCD
Built-in waterproofed speaker
3.5mm headphone socket
Metric: -20 to 50°C
Imperial: 14 to 122°F
Metric: -20 to 70°C
Imperial: 14 to 158°F
Metric: 648mm × 286mm × 125mm
Imperial: 25.5" × 11.3" × 4.9"
Metric: 700mm x 260mm × 330mm
Imperial: 27.6" x 10.2" x 13"
Metric: 2.6kg
Imperial: 5.7lb
10. RD Manager ™ Supporting PC Software
10.1 Operating System
Compatibility:
10.2 Locator system compatibility:
Microsoft ® Windows ® XP, 7, 8, 8.1, 32 and 64-bit versions
10.3 Functions:
10.4 Data export formats:
10.5 KML data export options:
Radiodetection RD8100 Precision Locators
RD7000+ and RD8000 Cable, Pipe and Marker Locators
• Locator configuration
• eCert ™ remote calibration certification
• Factory calibration certificate retrieval
• Usage-logging data collation and export
• Survey measurements data collation and export
• User account management
• CALSafe ™ maintenance schedule enforcement
• Product registration for extended warranty
• Locator software update
• Contact Radiodetection
• Book a service
.kml for Google ® Maps
.csv for database and spreadsheet applications
.xls / .xlsx for Microsoft ® Excel ®
Filter usage-logging and survey measurement points on Google ® maps.
Select data to be tagged. Customize icon type / color, label type / color, line type / color
11. Warranty and Maintenance
11.1 Manufacturer’s warranty duration: 3 years standard, on registration
11.2 Recommended calibration and maintenance schedule:
11.3 eCert remote calibration:
Annual, or at the beginning / end of a lease period if earlier
• Remote calibration certification using an internet connection to Radiodetection
• Recommended schedule: annual, or at the beginning / end of a lease period
11.4 CALSafe ™ :
11.5 Enhanced Self-Test:
• Can be enabled to prevent the locator operating when beyond a defined calibration / maintenance schedule
• Disabled by default
• 30-day countdown to calibration due date
On-unit
Applies test signals to locate circuitry to confirm correct operation, as well as the typical tests for screen and DSP functions.
Recommended schedule: weekly, or before each use.
11.6 Storage recommendation:
11.7 Cleaning:
Store in a clean and dry environment.
Ensure all terminals and connection sockets are clean, free of debris and corrosion and are undamaged
Clean with a soft, moistened cloth.
Do not use
• Abrasive materials or chemicals
• High pressure jets of water
If using this equipment in foul water systems or other areas where biological hazards may be present, use an appropriate disinfectant.
12. Certification and Compliance
12.1 Standards:
Safety:
EMC:
Environmental:
12.2 European directives:
12.3 Radio:
12.4 Environmental:
EN 61010-1:2010
EN 61326-1:2013
EN 300 330-2 (V1.5.1)
EN 300 440-2 (V1.4.1)
EN 301 489-3 (V1.6.1)
EN 301 489-17 (V2.2.1)
EN 60529 1992 A2 2013
EN 60068-2-64:2008 Test Fh
ESTI EN 300 019-2-2:1999 (per table 6)
EN 60068-2-27:2009 (Test Ea)
ESTI EN 300 019-2-2:1999 (per table 6)
R&TTE Directive 1999/5/EC
Low Voltage Directive: 2006/95/EC
EMC Directive: 2004/108/EC
Declaration of conformity is available from www.radiodetection.com
FCC, IC
WEEE compliant
ROHS compliant
ISO 9001:2008 12.5 Manufacturing:
13. Compatible Accessories
accessory
13.1 Lithium-Ion battery packs
13.2 Lithium-Ion battery chargers
13.3 Alkaline battery trays
13.4 Transportation and storage accessories – For combined locator and transmitter
13.5 Locator signal clamps
– For identification and location of utilities
Part description
Li-Ion rechargeable battery mains kit (Includes mains charger)
Li-Ion rechargeable battery pack (no charger)
Li-Ion automotive charger
Li-Ion mains charger
2 × D Cell battery tray (MN1300 / LR20)
Soft Carry Bag
Wheeled Flight Case
Hard Case
Metric: 50mm Locator Clamp
Imperial: 2" Locator Clamp
Metric: 100mm Locator Clamp
Imperial: 2" Locator Clamp
Metric: 130mm Locator Clamp
Imperial: 5" Locator Clamp
CD and Current Measurement Clamp
Part number
10/RX-MBATPACK-LION-K
10/RX-BATPACK-LION
10/RX-ACHARGER-LION
10/RX-MCHARGER-LION
10/RX-2DCELL-TRAY
10/LOCATORBAG
10/RD7K8KCASE
10/RD7K8KCASE-USA
10/RX-CLAMP-50
10/RX-CLAMP-2
10/RX-CLAMP-100
10/RX-CLAMP-4
10/RX-CLAMP-130
10/RX-CLAMP-5
10/RX-CD-CLAMP
accessory
13.6 Signal stethoscopes individual utilities e.g. within walls, congested areas or when cables/utilities are in close proximity to each other
13.7 Sondes
Battery powered signal transmitters for tracing or locating non-conductive utilities
Part description
High Gain Stethoscope
Large Stethoscope
Small Stethoscope
CD Stethoscope
Diameter mm In m
Range
Ft
Freq
(Hz)
S6 Microsonde
S9 Minisonde
S13 Super Small
Sonde
S18 Small Sonde
6
9
13
¼
3/8
½
2
4
2
6½
13
6½
33k
33k
33k
Standard
C-Sonde
18
39
¾
1½
4
5
14
16½
13.8 Submersible antennas:
Slim Sonde
Sewer Sonde
Super Sonde
Flexi Sonde
22
64
64
23
7/8
2½
2½
7/8
640 / 512Hz Submersible DD Antenna
8kHz Submersible DD Antenna
3.5
8
15
6
11½
26
50
20
13.9 FlexiTrace ™
– Use with a transmitter to trace small diameter pipes
13.10 Flexrods
FlexiTrace 50m / 165'
FlexiTrace 80m / 260' length Diameter propelling Radiodetection sondes through pipes to trace the path and locate blockages m
50
80
50
100
150
60
120
13.11 A-Frame – Used for locating sheath faults on cables and coating defects on pipelines
13.12 Headphones
13.13 Warning Triangle
13.14 PDAs
13.15 Calibration Certificates
A-Frame Bag
Ft
160
260
160
320
485
195
390
Recommended for use in noisy environments
Three sided folding warning sign
GPS PDA with SurveyCERT ™ + mm
4.5
4.5
7
7
7
9
9
A-Frame (includes A-Frame Lead)
In
3/16
3/16
¼
¼
¼
3/8
3/8
Locator Calibration Certificate, per unit (request with initial locator order) eCert ™ Calibration Credit
● Available feature
33k
33k
33k
512
33k
33k
8
512
Part number
10/RX-STETHOSCOPE-HG
10/RX-STETHOSCOPE-L
10/RX-STETHOSCOPE-S
10/RX-CD-STETHOSCOPE
10/SONDE-MICRO-33
10/SONDE-MINI-33
10/SONDE-S13-33
10/SONDE-S18A-33
10/SONDE-STD-33
10/SONDE-STD-8
10/SONDE-STD-512
10/SONDE-SLIM-33
10/SONDE-SEWER-33
10/SONDE-SUPER-33
10/SONDE-BENDI-512
10/RX-SUBANTENNA-640
10/RX-SUBANTENNA-8K
10/TRACE50-GB
10/TRACE80-GB
10/FLEXRODF50-4.5
10/FLEXRODF80-4.5
10/FLEXRODF50-7
10/FLEXRODF100-7
10/FLEXRODF150-7
10/FLEXRODF60-9
10/FLEXRODF120-9
10/RX-AFRAME
10/RX-AFRAME-BAG
10/RX-HEADPHONES
10/WARNING-TRIANGLE
10/RX-PDA
97/RX-CALCERT
10/RX-ECERT
All specification are measured in test conditions, at 21°C / 70°F, and fitted with 2 × good quality alkaline batteries unless otherwise noted.
1 Based on volumetric testing at a known fixed depth. True depth accuracy depends on factors such as ground composition, utility characteristics and the locate frequency / signal strength employed. Always follow local safe digging guidelines.
2 The RD8100 will locate to greater depths in the right conditions, but depth accuracy will be compromised. Depth measurement will not be displayed beyond these depths.
3 Tested with clear line-of-sight. Range is dependent on electrical environment and weather conditions. For optimum range, face the locator toward the transmitter and raise the transmitter 2' / 60cm from the ground.
4 To provide repeatable measurements, run-time is measured with GPS and Bluetooth functions switched to ‘off’
5 Water projected by a nozzle at a pressure of 30kPa /0.3 bar / 4.4 psi in accordance with BS EN 60529 1992 A2 2013
6 At very low temperatures, battery life will be degraded and measurement precision may be reduced.
RD8100
Global locations
U Sa
SPX Global Headquarters
13320 Ballantyne Corporate Place
Charlotte, NC 28277, USA
Tel: +1 704 752 4400 www.spx.com
Radiodetection
28 Tower Road, Raymond, Maine 04071, USA
Tel: +1 (207) 655 8525
Toll Free: +1 (877) 247 3797
Fax: +1 (207) 655 8535 [email protected] www.radiodetection.com
Pearpoint
39-740 Garand Lane, Unit B
Palm Desert, CA 92211, USA
Tel: +1 800 688 8094
Tel: +1 760 343 7350
Fax: +1 760 343 7351 [email protected] www.radiodetection.com
Radiodetection (Canada)
344 Edgeley Boulevard, Unit 34
Concord, Ontario L4K 4B7, Canada
Tel: +1 (905) 660 9995
Toll Free: +1 (800) 665 7953
Fax: +1 (905) 660 9579 [email protected] www.radiodetection.com
E U R OPE
Radiodetection Ltd. (UK)
Western Drive, Bristol BS14 0AF, UK
Tel: +44 (0) 117 976 7776
Fax: +44 (0) 117 976 7775 [email protected] www.radiodetection.com
Radiodetection (France)
13 Grande Rue, 76220, Neuf Marché, France
Tel: +33 (0) 2 32 89 93 60
Fax: +33 (0) 2 35 90 95 58 [email protected] http://fr.radiodetection.com
Radiodetection (Benelux)
Industriestraat 11
7041 GD ’s-Heerenberg, Netherlands
Tel: +31 (0) 314 66 47 00
Fax: +31 (0) 314 66 41 30 [email protected] http://nl.radiodetection.com
Radiodetection (Germany)
Groendahlscher Weg 118
46446 Emmerich am Rhein, Germany
Tel: +49 (0) 28 51 92 37 20
Fax: +49 (0) 28 51 92 37 520 [email protected] http://de.radiodetection.com
aS Ia-PaCI FI C
Radiodetection (Asia-Pacific)
Room 708, CC Wu Building
302-308 Hennessy Road, Wan Chai
Hong Kong SAR, China
Tel: +852 2110 8160
Fax: +852 2110 9681 [email protected] www.radiodetection.com
Radiodetection (China)
Room 5-10, Workshop 4
No. 10 Zhenggezhuang Village
Beiqijia Town, Changping District
Beijing 102209, China
Tel: +86 (0) 10 8178 5652
Fax: +86 (0) 10 8178 5662 [email protected] http://cn.radiodetection.com
Radiodetection (Australia)
Unit H1, 101 Rookwood Road,
Yagoona NSW 2199, Australia
Tel: +61 (0) 2 9707 3222
Fax: +61 (0) 2 9707 3788 [email protected] www.radiodetection.com
Radiodetection is a leading global developer and supplier of test equipment used by utility companies to help install, protect and maintain their infrastructure networks.
Radiodetection is a unit of SPX (NYSE: SPW), a global multi-industry manufacturing company. With headquarters in Charlotte, N.C., SPX has 14,000 employees in more than
35 countries worldwide. Visit www.spx.com.
© 2015 Radiodetection Ltd. All rights reserved. Radiodetection is a subsidiary of SPX Corporation. SPX, the green “>” and “X” are trademarks of SPX Corporation, Inc. Radiodetection, and RD8100 are registered trademarks of Radiodetection in the United States and/or other countries. Trademarks and Notices. The following are trademarks of Radiodetection:
RD8100, eCert, iLOC, TruDepth, SideStep, SideStepauto, RD Manager, Peak+, SurveyCERT, StrikeAlert, CALSafe, Current Direction. The design of the RD8100 locators and transmitters has been registered. The design of the 4 chevrons has been registered. The Bluetooth word, mark and logos are registered trademarks of Bluetooth SIG, Inc. and any use of such trademarks by Radiodetection is under license. Due to a policy of continued development, we reserve the right to alter or amend any published specification without notice. This document may not be copied, reproduced, transmitted, modified or used, in whole or in part, without the prior written consent of Radiodetection Ltd.
90/RD8100-DATA-ENG/01
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement