MHSC 36CDVZRRN Majestic Tribute 35-1/4 in. Tribute Rear Vent Direct Vent Natural Gas Specification

Add to My manuals

advertisement

MHSC 36CDVZRRN Majestic Tribute 35-1/4 in. Tribute Rear Vent Direct Vent Natural Gas Specification | Manualzz

PRODUCT SPECIFICATIONS

36CDVZTRN Tribute Direct Vent Gas Fireplaces

41³⁄₈” (1051 mm)

29

¹⁄₈”

(74

0 m m)

58

³⁄₈”

(14

83 mm

)

G L A S S V I E W I N G A R E A

29-1/2”W x 19”H (561 sq.in.)

T E C H N I C A L I N F O R M AT I O N

Max. Btu Input: 14,700 - 21,000 (NG) 15,750 - 21,000 (LP)

36" clean face firebox

FE Ratings (Fireplace Efficiency): 57% NG / 57% LP

AFUE by D.O.E Ratings: 63% NG / LP

Thermal Efficiency: 76.5% NG / 78% LP

Dimensions (Actual): 35-1/4” (front width) / 25” (rear width) x

32-1/8"H x 16-5/8”D

Dimensions (Framing): 36-1/4”W x 35”H x 17 -1/8”D

Uses 4" x 7" Twist Lock direct vent pipe

Attached 17' low voltage wire connected to valve for remote operation hook-up

18" flex line with On/Off shut-off valve included

CSA Design Certified

F I E L D I N S TA L L E D A C C E S S O R I E S

Fan and Cord (160cfm) (FK12)

Ambient Technologies ™ Remote Controls and Thermostats

Variable Speed Control (SCVS)

Conversion Kit 36CDVZ to LP (20010507)

Perimeter Trim - Black (36CDVTK)

Vent Kits available: (7TCRVT) horizontal vent for 7"-13" horizontal length and (7TCRVT1320) horizontal vent kit for 13"-20" horizontal length

90 Degree Elbow (7TCDV90)

Minimum

Rough

Opening

Depth

17¹⁄₈”

Minimum

Rough

Opening

Height

35”

(889 mm)

25” 9635 mm)

36 ¹⁄₄ ” (921 mm)

Minimum Rough Opening Width

33” (838 mm)

35¹⁄₄” (895 mm)

8” (203 mm)

32¹⁄₈”

(816 mm)

21¹⁄₈”

(537 mm)

34³⁄₄”

(883 mm)

3¹⁄₄”

(83 mm)

1³⁄₈”

(35 mm)

Q

8¹⁄₂”

(216 mm)

7³⁄₈”

(187 mm)

7³⁄₈” (187 mm)

8¹⁄₂” (216 mm)

14”

(356 mm)

2⁷⁄₈”

(73 mm)

1³⁄₈” (35 mm)

1

HPBA

Hearth, Patio & Barbecue Association

A Brand of Monessen Hearth Systems Co.

149 Cleveland Drive, Paris, Kentucky 40361 www.majesticproducts.com

To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable building or fire codes. Contact local building or fire officials about restrictions and installation inspection requirements. All photographs and drawings on this brochure are for illustrative purposes only and are not intended for, nor should they be used as a substitute for the instructions packaged with the unit. Appearance and specifications of the product are subject to change without notice. 11/09 v.1

advertisement

Related manuals

advertisement