ProScan CRT Television User`s guide

Projection Television Users Guide

For Models:

AV-65WP84

AV-56WP84

Illustration of AV-56WP84 and RM-C11G

Important Note:

In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user’s guide in a convenient place for future reference. Keep the carton and original packaging for future use.

Model Number:

Serial Number:

LCT1448-001B-A

0703-TN-II-IM

AV-56\65WP84 English 1 7/11/03, 9:32:34 AM

Important Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV

SET TO RAIN OR MOISTURE.

CAUTION:

TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source specified on the unit.

2. Avoid damaging the AC plug and power cord.

ventilation is unattainable.

not attempt to repair it yourself or remove the rear cover.

Changes or modifications not approved by JVC could void the warranty.

* When you don’t use this TV set for a long period of time, be sure to disconnect both the power plug from the AC outlet and antenna for your safety.

* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

IMPORTANT RECYCLING INFORMATION

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities, or the Electronic Industries Alliance: http://www.eiae.org

AV-56\65WP84 English 2 7/11/03, 9:32:35 AM

• As an “ENERGY STAR ® ” partner,

JVC has determined that this product or product model meets the

“ENERGY STAR ® ” guidelines for energy efficiency.

Important Safeguards

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential

electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this

TV set, observe the following basic rules for its installation, use and servicing. Also follow all warnings and instructions marked on your TV set.

INSTALLATION

1 Your TV set is equipped with a polarized AC line plug (one blade of the plug is wider than the other). This safety feature allows the plug to fit into the power outlet only one way.

Should you be unable to insert the plug fully into the outlet, try reversing the plug. Should it still fail to fit, contact your electrician.

(POLARIZED-TYPE)

2 Operate the TV set only from a power source as indicated on the TV set or refer to the operating instructions for this information. If you are not sure of the type of power supply to your home, consult your TV set dealer or local power company. For battery operation, refer to the operating instructions.

3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.

5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection requirements for the grounding electrode.

AV-56\65WP84 English 3 7/11/03, 9:32:35 AM

7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.

When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRICAL

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ARTICLE 250, PART H)

NEC - NATIONAL ELECTRIC CODE

8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during operation to be released.

Therefore:

— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa, rug, etc.

— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.

— Never cover the openings with a cloth or other material.

— Never place the TV set near or over a radiator or heat register.

9 To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secured.

— Use only a cart or stand recommended by the TV set manufacturer.

— Do not try to roll a cart with small casters across thresholds or deep pile carpets.

— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer.

Use

10 Caution children about dropping or pushing objects into the TV set through cabinet openings. Some internal parts carry hazardous voltages and contact can result in a fire or electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol cleaner.

12 Never add accessories to a TV set that has not been designed for this purpose. Such additions may result in a hazard.

AV-56\65WP84 English 4 7/11/03, 9:32:36 AM

PORTABLE CART WARNING

(Symbol provided by RETAC)

13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges.

14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV set and cart combination to overturn.

Service

15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the TV set.

C. If the TV set has been exposed to rain or water.

D. If the TV set does not operate normally by following the operating instructions. Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV set to normal operation.

E. If the TV set has been dropped or damaged in any way.

F. When the TV set exhibits a distinct change in performance — this indicates a need for service.

16 Do not attempt to service this TV set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17 When replacement parts are required, have the service technician verify in writing that the replacement parts he uses have the same safety characteristics as the original parts. Use of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.

18 Upon completion of any service or repairs to this TV set, please ask the service technician to perform the safety check described in the manufacturer’s service literature.

19 When a TV set reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask a qualified service technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

AV-56\65WP84 English 5 7/11/03, 9:32:36 AM

Warnings

Screen Burn-in

By displaying fixed images for extended periods of time, can leave a subtle but permanent ghost image in your picture. This is referred to as "burn-in". To avoid this, mix your viewing pattern.

Examples include, but are not limited to the following:

• Stock-market report bars

• Shopping channel logos and pricing displays

• Video game patterns or scoreboards

• Bright station logos

• Internet web sites or other computer-style

images.

• DVD discs, video tapes, laser discs

• Broadcast, cable, satellite channels or digital

television tuners/converters.

TV on

For example...

TV off

Note: Warranty DOES NOT cover screen burn-in or uneven picture tube aging.

XYZ XYZ

Caring for the Cabinet

Normally, light dusting with a soft, non-scratching duster will keep your TV clean.

If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water. You can add a few drops of mild liquid detergent to the water to help remove spots of oily dirt.

• DO NOT allow liquid to enter the TV through the ventilation slots.

• DO NOT use strong or abrasive cleaners on the TV.

• DO NOT spray liquids or cleaners directly on the TV’s surface.

• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.

Caring for the Screen

The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.

Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.

These will remove the coating layer and cause discolorations.

Do not push or hit the screen. This could cause scratches on the screen surface and image distortions.

AV-56\65WP84 English 6 7/11/03, 9:32:36 AM

Quick Setup . . . . . . . . . . . 8

Unpacking your TV . . . . . . . . . . . . 8

TV Models . . . . . . . . . . . . . . . . 9

TV Remote Controls . . . . . . . . . . . 10

Getting Started . . . . . . . . . . . . . 11

The Remote Control . . . . . . . . . . 11

Connecting Your Devices . . . . . . . 12

Interactive Plug In Menu . . . . . . . . 20

Remote Programming . . . . . 23

Setting CATV, VCR and DVD Codes . . . 23

CATV or Satellite Codes . . . . . . . . 23

VCR Codes . . . . . . . . . . . . . . 24

DVD Codes . . . . . . . . . . . . . . 25

Search Codes . . . . . . . . . . . . . 26

Onscreen Menus . . . . . . . . 27

Using the Guide . . . . . . . . . . . . . 27

Onscreen Menu System . . . . . . . . . 28

Initial Setup . . . . . . . . . . 30

Auto Tuner Setup . . . . . . . . . . . . 30

Channel Summary . . . . . . . . . . . . 30

V-Chip . . . . . . . . . . . . . . . . . . 31

Set Lock Code . . . . . . . . . . . . . 37

Adjusting CRT Color Conversion . . . . . 38

Auto Demo . . . . . . . . . . . . . . . 40

Language . . . . . . . . . . . . . . . . 40

Closed Caption . . . . . . . . . . . . . 41

Auto Shut Off . . . . . . . . . . . . . . 41

XDS ID . . . . . . . . . . . . . . . . . 42

Noise Muting . . . . . . . . . . . . . . 42

Front Panel Lock . . . . . . . . . . . . 42

V1 Smart Input . . . . . . . . . . . 43

Position Adjustment . . . . . . . . . . . 43

Power Indicator . . . . . . . . . . . . . 43

TV Speaker . . . . . . . . . . . . 44

Audio Out . . . . . . . . . . . . . . . . 44

Center CH Input . . . . . . . . . . . . . 44

Digital-In . . . . . . . . . . . . . . . . . 45

Picture Adjust . . . . . . . . . 46

Picture Settings . . . . . . . . . . . . . 46

Adjust Picture Settings . . . . . . . . . 46

Color Temperature . . . . . . . . . . . . 46

Digital Noise Clear . . . . . . . . . . . . 47

VSM . . . . . . . . . . . . . . . . . . . 47

Reset . . . . . . . . . . . . . . . . . . 47

Table of Contents

Sound Adjust . . . . . . . . . 48

Sound Settings . . . . . . . . . . . . . 48

Adjust Sound Settings . . . . . . . . . 48

MTS (Multi-channel Sound) . . . . . . . 48

Clock Timers . . . . . . . . . . 49

Set Clock . . . . . . . . . . . . . . . . 49

On/Off Timer . . . . . . . . . . . . . . . 50

Button Functions . . . . . . . 51

Multi Screen Function . . . . . . . . . . 51

Split . . . . . . . . . . . . . . . . . . . 51

POP . . . . . . . . . . . . . . . . . . . 52

Index . . . . . . . . . . . . . . . . . . 52

EZ-Surf . . . . . . . . . . . . . . . . . 53

Freeze . . . . . . . . . . . . . . . . . . 53

Swap . . . . . . . . . . . . . . . . . 53

Select . . . . . . . . . . . . . . . . . . 53

Power . . . . . . . . . . . . . . . . . . 54

Number Buttons . . . . . . . . . . . . . 54

100+ Button . . . . . . . . . . . . . . . 54

Input . . . . . . . . . . . . . . . . . . . 54

Digital-In . . . . . . . . . . . . . . . . . 54

Channel +/- . . . . . . . . . . . . . 54

Volume +/- . . . . . . . . . . . . . 54

Return +/TV . . . . . . . . . . . . . . . 55

Sound . . . . . . . . . . . . . . . . . . 55

Muting . . . . . . . . . . . . . . . . . . 55

Video Status . . . . . . . . . . . . . . . 56

Natural Cinema . . . . . . . . . . . . . 56

TheaterPro D6500K . . . . . . . . . . . 56

Sleep Timer . . . . . . . . . . . . . . . 57

Display . . . . . . . . . . . . . . . . . 57

Aspect . . . . . . . . . . . . . . . . . 58

Aspect Ratios . . . . . . . . . . . . . 58

C.C. . . . . . . . . . . . . . . . . . . . 59

Menu . . . . . . . . . . . . . . . . . . 59

OK . . . . . . . . . . . . . . . . . . . 59

Back . . . . . . . . . . . . . . . . . . . 59

TV/CATV Slide Switch . . . . . . . . . . 60

VCR/DVD Slide Switch . . . . . . . . . 60

VCR Buttons . . . . . . . . . . . . . . . 60

DVD Buttons . . . . . . . . . . . . . . . 60

Light . . . . . . . . . . . . . . . . . . . 60

Super Focus . . . . . . . . . . . . . . . 60

Appendices . . . . . . . . . . 61

No Program . . . . . . . . . . . . . . 61

Troubleshooting . . . . . . . . . . . . . 62

Warranty . . . . . . . . . . . . . . . . . 64

Authorized Service Centers . . . . . . . 66

Specifications . . . . . . . . . . . . . . . 67

Notes . . . . . . . . . . . . . . . . . . 68

AV-56\65WP84 English 7 7/11/03, 9:32:37 AM

Quick Setup Unpacking your TV

Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include:

1 Television

1 Remote Control

Two AA

Batteries

POWER

PULL OPEN

HDTV

TV CATV VCR DVD

ASPECT

SPLIT

MULTI SCREEN

POP INDEX EZ SURF

FREEZE SWAP SELECT

INPUT 1

V1

INPUT 2

V2

INPUT 3

V3

1

4

2

5

7 8

INPUT 4

V4 100+

DIGITAL-IN

THEATER

PRO

NATURAL

CINEMA

D-IN

0

SLEEP TIMER DISPLAY SOUND

+

3

6

9

RETURN+

TV

VIDEO

STATUS

LIGHT

MUTING

CH

C.C.

C.C.

VOL

OK

VOL

MENU

VCR CHANNEL

PREV NEXT

CH

BACK

VCR DVD

POWER TV VCR

REW PLAY FF

REC

OPEN CLOSE

STOP PAUSE

STILL PAUSE

RM-C11G

Note: Your television and/or remote control may differ from the examples illustrated here.

Once you have unpacked your television, the next step is to connect it to your antenna/ cable or satellite system and to connect the audio/video devices you want to use with your television. To make these connections you will use plugs like the ones illustrated below.

Coaxial Cables Component Cables

Composite Cables

Audio Cables

Used to connect an external antenna or cable TV system to your TV.

S-Video Cable

Used to connect audio/ video devices like

VCRs, DVD players, stereo amplifiers, game consoles, etc.

AV CompuLink Cable

Used to make video connections with S-Video

VCRs, Camcorders and

DVD players.

Used to connect JVC

AV CompuLink capable components for an automated home theater.

We recommend that before you start using your new television, you read your entire User’s

Guide so you can learn about your new television’s many great features. If you’re anxious to start using your television right away, a quick setup guide follows on the next few pages.

8

AV-56\65WP84 English 8 7/11/03, 9:32:37 AM

Quick Setup TV Models

NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television.

Rear Panel Diagram

MODELS:

AV-65WP84

AV-56WP84

75Ω

( VHF/UHF )

UNPLUG THE POWER CORD FROM AC OUTLET

BEFORE REMOVING THE REAR COVER

When the rear cover is removed, follow "CAUTION AT DISASSEMBLY" procedure in the service manual before plugging the TV's power cord into an AC outlet. Failure to follow the procedure will result in PERMANENT damage to some of the television features.

DÉBRANCHEZ LE CORDON DE LA PRISE DE COURANT

C. A. AVANT DE RETIRER LE COUVERCLE ARRIÈRE.

Une fois le couvercle arrière déposé suivez l procédure

« ATTENTION LORS DU DÉMONTAGE » décrite dans une prise c.a. L'omission de suivre la procédure causera des dommages PERMANENTS à certaines fonctions du téléviseur.

Licensed from BBE Sound, Inc. under USP4638258, 4482866 and 5510752.

BBE is a registered trademark of BBE Sound, Inc.

Sous licence de BBE Sound, Inc.

BBE est une marque de fabrique déposée de BBE Sound, Inc.

Autorizado con licencia de BBE Sound, Inc.

BBE es une marca comercial registrada de BBE Sound, Inc.

DIGITAL IN

R

AUDIO

L

SPEAKER INPUT

16Ω 60W MAX

VIDEO

SUBWOOFER

OUT

AUDIO OUT

R L

AUDIO

R L

VIDEO S-VIDEO

OVER

INPUT 3

INPUT 2

INPUT 1

AV COMPULINK III

OVER

COMPONENT VIDEO

INPUT 2 INPUT 1

Y

P b

Pr

Y

P b

Pr

Front Panel Diagram

POWER

PULL/OPEN

POWER

POWER

PULL OPEN

HDTV

MENU – CHANNEL + – VOLUME +

SUPER

FOCUS

OPERATE

S-VIDEO

OVER

INPUT-4

VIDEO

AUDIO

L / MONO R

MODELS: AV-65WP84, AV-56WP84

AV-56\65WP84 English 9

9

7/11/03, 9:32:38 AM

Quick Setup TV Remote Control

TV CATV VCR DVD

ASPECT

SPLIT

MULTI SCREEN

POP INDEX EZ SURF

FREEZE SWAP SELECT

INPUT 1

V1 1 2

SLEEP TIMER DISPLAY SOUND

+

3

INPUT 2

V2 4 5 6

INPUT 3

V3 7 8 9

RETURN+

INPUT 4

V4 100+ 0

DIGITAL-IN

THEATER

PRO

D-IN

NATURAL

CINEMA

TV

VIDEO

STATUS

LIGHT

MUTING

CH

VOL

OK

VOL

C.C.

C.C.

MENU

VCR CHANNEL

PREV NEXT

CH

BACK

VCR DVD

POWER TV VCR

REW PLAY FF

REC

OPEN CLOSE

STOP PAUSE

STILL PAUSE

RM-C11G

RM-C11G

MODELS:

AV-65WP84

AV-56WP84

• For information on remote control buttons, see pages 51 - 60.

10

AV-56\65WP84 English 10 7/11/03, 9:32:38 AM

Quick Setup Getting Started

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual.

Step 1 – The Remote Control

Before you can operate your remote control, you first need to install the batteries (included).

Slide the cover on the back of the remote down towards the bottom of the remote control. Insert two batteries

(included) carefully noting the “+” and

“–” markings, placing the “–” end in the unit first. Slide the cover back into place.

When you change the batteries, try to complete the task within three minutes. If you take longer than three minutes, the remote control codes for your VCR, DVD, and/or cable box/satellite receiver may have to

be reset. See pages 23 - 26.

Key Feature Buttons

The four key feature buttons at the center of the remote can be used for basic operation of the television. The top and bottom buttons will scan forward and back through the available channels. To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or

CH –. The channels will zip by at a rate of five channels per second. The right and left buttons will turn the volume up or down. These buttons are also marked with four arrows and are used with JVC’s onscreen menu system. To use the onscreen menus, press the M

ENU

button.

MUTING

CH

VOL

OK

VOL

C.C.

C.C.

MENU

CH

BACK


11

7/11/03, 9:32:38 AM

Quick Setup Connections

Basic Operation

Turn the television on and off by pressing the P OWER button at the top right corner of the remote. If this is the first time you are turning on the TV, the interactive plug-in menu appears.

• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box.

• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to

DVD to control a DVD player. Please see pages 23 to 26 for instructions on programming your remote control to operate a cable box, VCR or DVD player.

T

TV CATV

VCR DVD

Step 2 – Connecting Your Devices

Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV.

A VCR is not necessary for operation of the television. If you follow these diagrams and the television does not work properly, contact your local cable operator.

• To connect a DVD player, see Diagram #3. A DVD player is optional.

• If you have a satellite television system, please refer to the satellite TV manual.

Do you use a Cable TV Box?

Yes No

Do you have a VCR?

Yes No

Diagram #2 Diagram #1

12


Do you have a VCR?

Yes No

Diagram #3 Diagram #1

7/11/03, 9:32:39 AM


Diagram #1

75Ω

(VHF/UHF)

Cable or Antenna

Output

Coaxial Cable

OR

TV Rear Panel

OUT IN

Cable Box

Note:

• If you do not have a cable box, connect the cable wire from the wall outlet into the back of the TV.

Diagram #2

Cable or Antenna

Output

AUDIO

R L

VIDEO S-VIDEO

OVER

INPUT 3

INPUT 2

INPUT 1

AV COMPULINK III

OVER

TV Rear Panel

Coaxial Cable

75Ω

(VHF/UHF)

Two-Way

Splitter

OR

VCR

IN

IN

OUT

R L V

OUT

OUT IN

Cable Box

Notes:

• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the

LEFT AUDIO INPUT on the front of the TV.

• Use the S-Video connection if possible for superior picture quality.

• Your VCR must be turned on to view premium cable channels.

13

AV-56\65WP84 English 13 7/11/03, 9:32:39 AM


Notes:

• Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables.

• You may also connect the DVD player to Input 1.

Diagram #3

Cable or Antenna

Output

Coaxial Cable

Two-Way

Splitter

IN

OUT OUT

IN

OUT

R L V

OR

IN

OUT

VCR

75 Ω

(VHF / UHF)

TV Rear Panel

AUDIO

R L

VIDEO S-VIDEO

OVER

INPUT 3

INPUT 2

INPUT 1

AV COMPULINK III

OVER

COMPONENT VIDEO

INPUT 2 INPUT 1

Y

P b

Pr

Y

P b

Pr

AUDIO OUT

R L

Y

P B

P R

OUT

DVD Player (OPTIONAL)

Green

Blue

Red

14

AV-56\65WP84 English 14 7/11/03, 9:32:39 AM


Connecting to JVC AV Compu Link

JVC’s AV CompuLink feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the

AV CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input.

• The AV CompuLink cable may be included with the JVC AV CompuLink unit you wish to connect. If it is not, contact JVC Parts Department at (800)-882-2345, or www.jvcservice.com for part # EWP 805-012.

• AV CompuLink can only be used with JVC brand products.

AV CompuLink Cable

To Connect: Plug one end of the AV CompuLink cable into the AV COMPULINK INPUT on your VCR, DVD, or other CompuLink device. Plug the other end of the

AV CompuLink cable into the AV COMPULINK at the rear of the television.

Note:

• The AV CompuLink cable has a male 3.5 mm (mono) plug on each end.

TV Rear Panel

AV COMPULINK III

IN

V L R

IN

OUT

VCR

OUT

AV CompuLink

Notes:

• In order for the VCR playback to begin automatically, the recording tabs must be removed from the VHS tape. If the tab is in place, automatic switching will occur when you push the

VCR’s P LAY button.

• If your JVC brand VCR has “A code/B code remote control switching” (see your VCR’s instruction book), using VCR A code will switch the TV to input 1.

• Refer to your DVD instruction book for detailed connection information.

• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the receiver connection instructions for detailed connection information.

• AV CompuLink is compatible with select AV CompuLink receivers.


15

7/11/03, 9:32:39 AM


Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 4) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions.

MENU – CHANNEL + – VOLUME +

OPERATE

S-VIDEO

INPUT-4

VIDEO

AUDIO

L / MONO

OVER

R

SUPER

FOCUS

CAMCORDER

- OR -

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on the front of the TV, OR connect an S-Video cable from the front of the TV to the camcorder.

2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on the front of the TV.

3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on the front of the TV.

Note:

• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the

LEFT AUDIO IN on the front of the TV.

16

AV-56\65WP84 English 16 7/11/03, 9:32:40 AM


Connecting to an External Amplifier

Subwoofer Out - Use a powered subwoofer with the surround feature to simulate a home theater system. Simply connect the subwoofer to the back of the TV.

TV Rear Panel

SUBWOOFER

OUT

AUDIO OUT

R L

Speaker

Amplifier

Speaker

Powered

Subwoofer

1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the

LEFT AUDIO INPUT on the amplifier.

2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the

RIGHT AUDIO INPUT on the amplifier.

3) Connect a black cable from the SUBWOOFER OUT on the back of the TV to the LINE INPUT of the subwoofer.

Notes:

• Refer to your amplifier’s manual for more information.

• You can use AUDIO OUTPUT for your home theater system.

Connecting to the Surround Amplifier

Note: Please read the benefit of this feature on page 44.

Front Front

TV Rear Panel

BLACK

Surround

SPEAKER INPUT

16Ω 60W MAX

RED

Center Speaker Out


17

7/11/03, 9:32:40 AM


Connecting to a Digital TV Receiver w/HDCP

By inputting a high bandwidth digital content protection high definition picture source to the digital-in terminal of this television, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for use in the future when high bandwidth digital content protection DTV decoders and DVD players and D-VHS are put on the market.)

DTV Decoder

AUDIO OUT

L R

DIGITAL OUT

DIGITAL IN

R

AUDIO

L

VIDEO

After the connections have been made, tighten the screw to secure the cables.

1) Connect the DTV DIGITAL RGB OUTPUT TERMINAL to the DIGITAL INPUT TERMINAL of the television, and then tighten the 2 screws.

2) Connect the DTV decoder LEFT AUDIO OUTPUT to the DIGITAL-IN LEFT AUDIO INPUT.

3) Connect the DTV decoder RIGHT AUDIO OUTPUT to the DIGITAL-IN RIGHT AUDIO

INPUT.

• The Digital-In terminal can only be used with 1080i, 720p and 480p picture signals. Set the DTV decode digital-out terminal output setting to 1080i, 720p or 480p. For detailed information, refer to the DTV decoder instruction manual. If you can not display the picture because your DTV decoder does not have a digital-out terminal output setting, use the component video input (or the S-Video input or video input). Refer to page 13. In this case the picture will be displayed as an analog signal.

• The digital-in terminal is not compatible with the picture signal of a personal computer.

• Use a DVI-D single link 19-pin cable (commercially available) in order to digitally connect the television with a DTV decoder.

If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may be slightly shifted. In cases such as this, the horizontal balance can be adjusted by accessing

“DIGITAL-IN” in the INITIAL SETUP menu. (Refer to page 45.)

18

AV-56\65WP84 English 18 7/11/03, 9:32:40 AM


Connecting to an AV Receiver using your television's

V1 Smart Input

By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV. This allows you to free up the other input connections so you can connect more devices to your television.

AV Receiver

MONITOR

OUT

Y

P

B

P R

MONITOR OUT

TV Rear Panel

AUDIO

R L

VIDEO S-VIDEO

OVER

INPUT 3

INPUT 2

INPUT 1

AV COMPULINK III

OVER

COMPONENT VIDEO

INPUT 2 INPUT 1

Y

P b

Pr

Y

P b

Pr

1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1 on the back of your television.

2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO

INPUT-1 on the back of your television.

3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y

VIDEO INPUT-1 on the back of your television.

4) Connect a Blue Component Cable from the AV Receiver's P

B

MONITOR OUT, into the Pb


5) Connect a Red Component Cable from the AV Receiver's P R MONITOR OUT, into the Pr


Note:

• Please refer to your AV Receiver instruction manual for more information on connecting your speakers and other devices like a DVD player.

• Use your AV Receiver's remote to switch to the different devices you have connected.

• Some AV Receivers may not respond when the V1 Smart Input function is turned on.

• If you have video connections for each input device connected to your AV Receiver, you should not connect them using both S-Video and Composite connection at the same time when you are using V1 Input as the V1 Smart Input. In this case we recommend using the

S-Video connection.

19

AV-56\65WP84 English 19 7/11/03, 9:32:41 AM

Quick Setup Plug-In Menu

Step 3 – The Interactive Plug In Menu

When you turn your television on for the first time the interactive plug-in menu will appear. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for:

• The language in which you want the onscreen menus to appear.

• Setting the TV’s clock to the correct time so your timer functions will work properly. You can choose “AUTO” or “MANUAL” for setting the clock.

• The auto tuner setup of which channels you wish to receive.

We recommend you complete the interactive plug-in items before you start using your television.

Language

After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically switches to the LANGUAGE settings. You can choose to view your onscreen menus in three languages: English, French (Français) or Spanish (Español).

LANGUAGE/LANGUE/IDIOMA

√® To choose a language:

(English, Français or Español)

† To NEXT (To set clock)

ENGLISH

NEXT

SELECT OPERATE

MENU

EXIT

(To be continued...)

20

AV-56\65WP84 English 20 7/11/03, 9:32:41 AM


Auto Clock Set

Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal:

√® To

SET CLOCK

MODE

TIME ZONE

D.S.T.

AUTO

ATLANTIC

OFF

√® To select your time zone: (Atlantic, Eastern,

Central, Mountain, Pacific, Alaska or

Hawaii)

† To move to D.S.T. (Daylight Savings Time)

√® To turn D.S.T. ON or OFF

† To NEXT (To Auto Tuner Setup)

NEXT

SELECT OPERATE

MENU

EXIT

Notes:

• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight

Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in October.

• You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

Manual Clock Set

To set your clock manually (without using the XDS signal), choose MANUAL. If you choose

AUTO, see auto clock set above.

SET CLOCK

√® To choose MANUAL

† To TIME

√® To set the hour

MODE

TIME

MANUAL

-- : -- --

√® To set the minute

† To Start Clock

START CLOCK

SELECT OPERATE

MENU

EXIT

Note:

• You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

(To be continued...)

21

AV-56\65WP84 English 21 7/11/03, 9:32:41 AM


Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the C HANNEL +/– buttons) you will receive only clear, active channels.

AUTO TUNER SETUP

√® To choose CABLE or AIR (or SKIP when you

† To START

TUNER MODE CABLE

NOW

PROGRAMMING !

START

SELECT OPERATE

MENU

EXIT

48

Programming will take approximately 1 to 2 minutes.

When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your quick setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the

JVC onscreen menu system to customize your television viewing experience.

Notes:

• Noise muting will not work during Auto Tuner Setup.

• Skip appears only for interactive plug-in menu.

• The interactive plug-in menu setting does not appear if your TV has been turned on before.

In this case, use the menu to perform these settings. See pages 40, 49 and 30.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal.

STOP The Quick Setup is complete

22

AV-56\65WP84 English 22 7/11/03, 9:32:42 AM

Remote Programming

Setting the CATV, VCR and DVD Codes

You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer.

Cable Box or Satellite Codes

The remote control is programmed with cable box and satellite codes for power on/off, channel up/down, and 10 key operation.

1) Find the cable box or satellite brand from the list of codes shown below.

2) Slide the 2-way selector switch to “CATV”.

3) Press and hold down the D ISPLAY button, then enter the first code number listed with the 10 key pad.

4) Release the D

ISPLAY

button, and confirm the operation of the cable box/satellite receiver.

• If your cable or satellite box does not respond to the first code, try the others listed. If it does not respond to any code, try the search codes function, on page 26.

Cable Box

ABC

Archer

Cableview

Citizen

Curtis

Diamond

Eagle

Eastern

GC Brand

Gemini

General

Instrument/Jerrold

Hamlin

Hitachi

Macom

Magnavox

Memorex

Movietime

Oak

Panasonic

Paragon

Philips

Pioneer

Pulsar

Codes

024

032, 025

051, 032

022, 051

058, 059

024, 032, 025

029

034

032, 051

022, 043

065, 024, 025,

026, 027, 020,

021, 022, 057,

023, 072, 074

040, 041, 042,

045, 058, 064

049, 024

049, 050, 051,

054

033

030

032, 051

039, 037, 048

055, 056, 060,

071, 073

063

028, 029, 030,

052, 053, 031,

069

047, 062

051, 032

Cable Box

Puser

RCA

Realistic

Regal

Regency

Rembrandt

Samsung

Scientific Atlanta

SLMark

Sprucer

Stargate

Codes

032

061, 070

032

058, 064, 040,

041, 042, 045,

068

034

037, 032, 051,

038

051

057, 058, 059

051, 047

051, 056

032, 051

Telecaption

Teleview

Texscan

Tocom

067

047, 051

044

035, 036, 066,

074

Toshiba

Unika

Universal

Videoway

Viewstar

Zenith

Zenith/Drake

Satellite

050, 048

032, 025

022, 032

052

029, 030

063, 046

046

Digital

Satellite

Systems

Codes

Echostar

(Dish Network)

Express VU

100, 113, 114,

115

100, 113

G.E.

G.I.

106

108, 120, 121,

122

Gradiente

Hitachi

HNS (Hughes)

Magnavox

112

104, 111

104

102, 103

Panasonic

Philips

Primestar

Proscan

RCA

Sony

Star Choice

Toshiba

Uniden

105

102, 103, 116

108

106, 109, 110

106, 109, 110

107

104, 108

101, 104, 117,

118, 119

102, 103

23

7/11/03, 9:32:42 AM AV-56\65WP84 English 23


VCR Codes

The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation.

1) Find the VCR brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.

3) Press and hold down the D ISPLAY button, then enter the first code number listed with the 10 key pad.

4) Release the D

ISPLAY

button, and confirm the operation of the VCR.

• If your VCR does not respond to the first code, try the others listed. If it does not respond to any of the codes, try the search codes function on page 26.

VCR’s remote.

• To record, hold down the R

EC

button on the remote and press P

LAY

.

VCR Codes

Admiral

Aiwa

Akai

Audio Dynamic

Bell & Howell

Broksonic

Canon

CCE

Citizen

Craig

Curtis Mathes

Daewoo

DBX

Dimensia

Emerson

Fisher

Funai

G.E.

Go Video

Goldstar

Gradiente

035

027, 032, 095

029, 072, 073,

074

003, 005

063, 071

020, 026, 094

023, 025

043

064

063, 029, 064

045, 024, 027,

093

043, 059, 024,

092

003, 004, 005

045, 093

043, 026, 077,

061, 025, 042,

020, 076

063, 066, 067,

065, 071, 091

027, 026, 020,

000

033, 045, 024

037, 051, 049,

050, 089

064

083, 084, 081,

000, 001

Hitachi 023, 045, 058,

093, 027, 081

024, 023 Instant Replay

Jensen

JVC

003

003, 004, 005,

000, 001, 002,

006, 007

Kenwood 003, 004, 064,

005

VCR

Marantz

Marta

Memorex

MGA

Minolta

Mitsubishi

Multitech

NEC

Olympic

Optimus

Orion

Panasonic

Penney

Pentax

Philco

Philips

Pioneer

Proscan

Quasar

Radio Shack

RCA

LG 064

Realistic

LXI

Magnavox

027, 064, 058,

065, 066, 063,

067

031, 023, 024,

086

Codes

003, 004, 005

064

024, 067

038, 040, 047,

048, 041, 042

058, 045, 093

038, 040, 047,

048, 041, 042,

078, 090

047, 027, 062

003, 004, 005,

000

024, 023

028, 021, 035,

064

026, 020

023, 024, 021,

022

024, 058, 045,

063, 003, 004,

005, 093

058, 005, 045,

093

031, 024, 027,

023, 026, 020,

043

031, 023, 024,

086

023

045, 058, 023,

024, 031, 046,

059, 060, 093,

033, 087

021, 022, 023,

024

033, 024, 063,

036, 067, 040,

027

033, 045, 058,

023, 024, 031,

046, 059, 060,

083, 084, 085,

087, 093, 096

024, 063, 036,

067, 040, 027

Scott

VCR

Samsung

Samtron

Sansui

Sanyo

Sears

Sharp

Shintom

Signature 2000

Codes

037, 060, 062,

033, 089

089

003, 026, 020,

052

063, 067, 091,

071

059, 060, 062,

067, 038, 040,

047, 048, 026,

020

063, 064, 065,

066, 058

035, 036, 080,

088

075

027, 035

Singer

Sony

SV 2000

Sylvania

Symphonic

Tashiro

Tatung

Teac

Technics

Teknika

075

028, 029, 030,

053, 054, 055

027

031, 023, 024,

027

027, 081

064

003, 004, 005

003, 004, 027,

005

021, 022, 023,

024

024, 027, 070

Thomson

Toshiba

Vector Research

Wards

Yamaha

Zenith

033, 096

059, 046, 079

005

035, 036, 067,

044, 064

063, 003, 004,

005

044, 082, 064,

094

24

AV-56\65WP84 English 24 7/11/03, 9:32:42 AM


DVD Codes

The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation.

1) Find the DVD player brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.

3) Press and hold down the D

ISPLAY

button, then enter the first code number listed with the 10 key pad.

4) Release the D

ISPLAY

button, and confirm the operation of the DVD player.

• If your DVD player does not respond to the first code, try the others listed. If it does not respond to any of the codes, try the search codes function on page 26.

DVD player’s remote.

DVD Player

Aiwa

Apex

Bose

Denon

Funai

Go–Video

Harman

Kardon

Hitachi

JVC

Kenwood

KLH

Konka

Koss

Codes

043

040, 054,

055

058

020, 037

038

032

053

031

000

035, 020

051

039

050

DVD Player

Mintek

Mitsubishi

Next Base

Onkyo

Oritron

Panasonic

Philips

Pioneer

Polk Audio

Raite

RCA

Sampo

Samsung

Codes

057

025

056

041, 052

044

020

023, 036

022

036

033

021, 026

034

030

DVD Player

Sharp

Silvania

SMC

Sony

Technics

Thomson

Toshiba

Venturer

Vialta

Wave

Yamaha

Zenith

Codes

028

038

048

024, 045,

046, 047

020

021

023

051

050

042

020, 049

027, 032

25

7/11/03, 9:32:42 AM AV-56\65WP84 English 25


Search Codes

Cable/Satellite Search Codes Function

1) Slide the first 2-Way Mode Selector switch to CATV.

2) Press and hold down the P

OWER

button, then press the R

ETURN

+/TV button for more than three seconds.

3) Release the R

ETURN

+/TV button, then release the P

OWER

button.

4) Press the P OWER button on the remote, and see if the cable or satellite box responds.

5) If there was a response, press R

ETURN

+/TV. The codes are now set. If there was no response, repeat Step 4. If you repeat Step 4 a total of 80 times without a response, use the remote control that came with your equipment.

6) Press R ETURN +/TV to exit.

VCR/DVD Search Codes Function

1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or

“DVD”.

2) Press and hold down the VCR or DVD P

OWER

button, then press the R

ETURN

+/TV button for more than three seconds.

3) Release the R

ETURN

+/TV button, then release the VCR or DVD P

OWER

button.

4) Press the VCR or DVD P

OWER

button, and see if the VCR or DVD responds.

5) If there was a response, press R

ETURN

+/TV. The codes are now set. If there was no response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (40 times for the DVD player), and there is no response, use the remote control that came with your equipment.

6) Press R ETURN +/TV to exit.

26

AV-56\65WP84 English 26 7/11/03, 9:32:43 AM

Onscreen Menus

Using the Guide

Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are:

π† H

+ or C

H

– buttons. Pressing the C

H

+ or C

H

– buttons let you:

• Move vertically in a main menu screen

• Move through a submenu screen

• Move to the next letter, number, or other choice in a submenu

• Back up to correct an error

• Scan through TV channels (when not in a menu screen)

√® Left and right arrows mean press the V

OLUME

+ or V

OLUME

– buttons to move left or right to:

• Select a highlighted menu item

• Select an item in a submenu

• Select numbers in certain menu options

• Turn the volume up or down (when not in a menu screen)

The “press button” icon means you should press the button named on your remote control. (Button names appear in S

MALL

C

APITAL

L

ETTERS

.)

The “helping arrow” icon points to the highlighted or selected item in a menu.

To bring up the onscreen menu, press the M

ENU

button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the TV’s front panel instead of the remote, an additional menu screen showing INPUT and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in menu” will appear the first time the TV is plugged in.

Note:

• Menus shown in this book are illustrations, not exact replications of the television’s onscreen displays.


27

7/11/03, 9:32:43 AM

Onscreen Menus

The Onscreen Menu System

Your television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly. Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. For information about the interactive plug-in Menu, see pages 20 - 22.

The Onscreen Menu System

To open the onscreen menu system, press the M

ENU

button on the remote control. You navigate within the onscreen menus by using the four directional arrow buttons on the remote control. (These buttons are also the C

H

+/– and V

OL

+/– buttons. Channel and volume functions will not operate when the onscreen menu is active).

The selected feature and option on a menu screen are highlighted in a different color.

Selected Option

(Green)

LANGUAGE

CLOSED CAPTION

ENG. FRAN. ESP.

Selected Option

(Blue)

To move to a different feature use the π† arrows to move up or down the list. When you press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen will appear. Use the arrows √ ® to select an option from the highlighted feature. Pressing

M

ENU

on the remote control will close the onscreen menu system and return you to normal television viewing.

Each menu and its features will be discussed in the following pages of this guide.

Notes:

• If you do not press any buttons for a few seconds, the onscreen menu will automatically shut off.

• Button names in this guide are shown in S

MALL

C

APITAL

L

ETTERS

.

• Menus may appear in different sizes onscreen depending on the aspect ratio selected.

• Some menu items may not appear in menu screens when certain aspect ratios or inputs are selected.

28

AV-56\65WP84 English 28 7/11/03, 9:32:43 AM

Press the M ENU button

Onscreen Menus

INITIAL SETUP 04

PICTURE ADJUST 01

Notes:

• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the digital-in terminal and the picture is being displayed on the screen.

• When the Menu button on the TV front panel is pressed, the FRONT

PANEL CONTROL menu between INITIAL

SETUP 04 and

PICTURE ADJUST 01 will appear.



PICTURE ADJUST 02


SOUND ADJUST


CLOCK/TIMERS

29

7/11/03, 9:32:44 AM

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 22 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below.

Press the M

ENU

button

π† To AUTO TUNER SETUP

√® To operate

√® To choose CABLE or AIR

Press the O

K

button to start

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.

Press the Menu button when finished

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels.


π† To CHANNEL SUMMARY

√® To

The Channel summary screen will now be displayed with the channels set to scan marked with an “√”. You can delete channels from the scan by removing the “√”. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an “√” next to the channel number.

√® To the SCAN column

Press the O

K

button to include or delete from scan

Press the M

ENU

button when finished

You can block access to a channel by activating the channel lock.

Press the M

ENU

button

√® To operate

√® To the Lock Column ( )

Press the Z

ERO

button to lock or unlock that channel

Press the M

ENU


30

AV-56\65WP84 English 30 7/11/03, 9:32:44 AM

Initial Setup

Channel Guard Message

When a viewer attempts to watch a guarded channel, the following message appears:

To watch a channel that you have locked, enter the

Lock Code using the 10 key pad.

If the wrong code is entered, the message

“INVALID LOCK CODE!” will flash on the screen.

The channel cannot be accessed until the correct code is entered.

Notes:

• Once a channel has been unlocked, it will remain unlocked until the television is turned off.

• See also “Set Lock Code”, page 37.

V-Chip

Your TV is equipped with V-Chip technology which enables you to block channels or content that you feel to be inappropriate for children, based on US and Canada rating guidelines.

V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.

Note: Some programs, and movies are broadcast without a ratings signal. Even if you set up V-CHIP ratings limits, these programs will not be blocked. See page 32 for information on how to block unrated programs.

Note (for Canadian viewers): The V-Chip function is based on specifications designed for the United States and therefore may not work properly in Canada.

You can customize the V-Chip settings of your television to match your personal tastes. The

V-Chip menu below is the starting point for your V-Chip settings

You can use US V-Chip settings (for programming broadcast from the United States), Canadian

V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting each of the three V-Chip formats appear in the next six pages along with descriptions of the rating categories.

To access the rating categories:

Press button

π† To V-CHIP

√®

Press Z

ERO

to access the V-Chip menu

√®

ON for rating settings to operate)

π† To move to SET US TV RATINGS,

SET MOVIE RATINGS, or

SET CANADIAN RATINGS (see following pages for descriptions of each item)

31

AV-56\65WP84 English 31 7/11/03, 9:32:45 AM

Initial Setup

Unrated Programs

Unrated programming refers to any programming which does not contain a rating signal.

Programming on television stations which do not broadcast rating signals will be placed in the

“Unrated Programming” category.

Examples of Unrated programs:

• Emergency Bulletins

• News

• Public Service Announcements

• Sports

• Some Commercials

Note:

• Locally Originated Programming

• Political Programs

• Religious Programs

• Weather

• TV programs or movies that do not have rating signals will be blocked if the unrated category is set to BLOCK.

Directions to Block Unrated Programs

You can block programs that are not rated.

Press the M

ENU

button

π† To V-CHIP

Press Z

ERO

to access V-Chip setup options

π† To UNRATED

√® To VIEW or BLOCK

32

AV-56\65WP84 English 32 7/11/03, 9:32:46 AM

Initial Setup

US V-Chip Ratings

U.S. PARENTAL RATING SYSTEMS

Programs with the following ratings are appropriate for children.

TV Y is Appropriate for All Children

Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6.

TV Y7 is for Older Children

Most parents would find such programs suitable for children 7 and above. These programs may contain some mild fantasy violence or comedic violence, which children should be able to discern from reality.

Programs with the following ratings are designed for the entire audience.

TV G stands for General Audience

Most parents would find these programs suitable for all age groups. They contain little or no violence, no strong language, and little or no sexual dialog or situations.

TV PG Parental Guidance Suggested

May contain some, but not much, strong language, limited violence, and some suggestive sexual dialog or situations. It is recommended that parents watch these programs first, or with their children.

TV 14 Parents Strongly Cautioned

Programs contain some material that may be unsuitable for children under the age of 14 including possible intense violence, sexual situations, strong coarse language, or intensely suggestive dialog. Parents are cautioned against unattended viewing by children under 14.

TV MA Mature Audiences Only

These programs are specifically for adults and may be unsuitable for anyone under 17 years of age. TV MA programs may have extensive V, S, L, or D.

Viewing Guidelines

In addition to the ratings categories explained above, information on specific kinds of content are also supplied with the V-Chip rating. These types of content may also be blocked. The content types are:

33

7/11/03, 9:32:46 AM AV-56\65WP84 English 33

Initial Setup

Setting US V-Chip Ratings

Press button

π† To V-CHIP

√® To operate (lock icon appears)

Press Z

ERO

to access the V-Chip menu

√® To turn V-Chip ON or OFF

π† To move to SET US TV RATINGS

√® To

Directions to set US V-Chip Ratings

Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and or √® to move the cursor to the correct location. Press O

K

to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”.

For example. To block viewing of all TV 14 shows, move the cursor to the top row of that column and add a lock icon. Once you’ve put a lock on the top row, everything in that column is automatically locked.

√® To the TV 14 Column

Press the O

K

button to lock

Press button when finished

Note:

• If you want to change the setup, move the cursor to the top column and change the lock icon to “—” by pressing OK again. You may then select individual categories to block.

34

AV-56\65WP84 English 34 7/11/03, 9:32:46 AM

Initial Setup

Movies Ratings

NR – Not Rated

This is a film which has no rating. In many cases these films were imported from countries which do not use the MPAA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released.

NR (Not Rated) Programming may contain all types of programming including children’s programming, foreign programs, or adult material.

G – General Audience

In the opinion of the review board, these films contain nothing in the way of sexual content, violence, or language that would be unsuitable for audiences of any age.

PG – Parental Guidance

Parental Guidance means the movie may contain some contents such as mild violence, some brief nudity, and strong language. The contents are not deemed intense.

PG-13 – Parents Strongly Cautioned

Parents with children under 13 are cautioned that the content of movies with this rating may include more explicit sexual, language, and violence content than movies rated PG.

R – Restricted

These films contain material that is explicit in nature and is not recommended for unsupervised children under the age of 17.

NC-17 – No One Under 17

These movies contain content which most parents would feel is too adult for their children to view. Content can consist of strong language, nudity, violence, and suggestive or explicit subject matter.

X – No One under 18

Inappropriate material for anyone under 18.

Directions to set Movie (MPAA) Ratings

Press the M

ENU

button

π† To V-CHIP

√®

Press Z ERO to access V-Chip setup options

π† To SET MOVIE RATINGS

√® To enter movies menu

For example:

To block viewing of X and NC-17 rated from shows:

√® To the X Column

Press the O

K

button to lock

√® To the NC-17 Column

Press the O K button to lock

Press the M

ENU

button to finish

35

7/11/03, 9:32:47 AM AV-56\65WP84 English 35

Initial Setup

Canadian V-Chip Ratings

E – Exempt

Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

C – Programming Intended for Children

Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature.

C8+ – Programming Intended for Children 8 and Over

Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low intensity and will show the consequences of the acts. There will be no offensive language, nudity or sexual content.

– Audience

Programming will contain little violence and will be sensitive to themes which could affect younger children.

PG – Parental Guidance

Programming intended for a general audience, but which may not be suitable for younger children. Parents may consider some content not appropriate for children aged 8-13.

14+ – 14 Years and Older

Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. Programming may contain mature themes and scenes of intense violence.

18+ – Adult

Material intended for mature audiences only.

Directions to set Canadian V-Chip Ratings

Press the M

ENU

button

π† To V-CHIP

√®

Press Z ERO to access V-Chip setup options

π† To SET CANADIAN RATINGS ENG (for English)

√® To enter ratings menu

For example:

To block viewing of programming rated 14+ and 18+:

√® To the 18+ Column

Press the O

K

button to lock

√® To the 14+ Column

Press the O

K

button to lock

Press the M

ENU

button to finish

Note:

French side of this user’s guide.

36

AV-56\65WP84 English 36 7/11/03, 9:32:47 AM

Initial Setup

Set Lock Code

Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of “0000”. You may change the code to any four-digit number you wish.

To change the lock code, follow the steps below.


π† To SET LOCK CODE

√® To operate (lock icon appears)

Press Z

ERO

to access the lock code

The first digit will be highlighted

√® To select the number

π† To move to the next digit

Continue to follow these directions for all four numbers

Press the OK button to finish (your lock code is now set)

Press the Menu button when finished

When a viewer attempts to watch a blocked channel, this message appears:

The channel will remain blocked until the correct lock code is entered (see above for information on setting your lock code).

Notes:

• After a power interruption you must reset the lock code.

• Write your lock code number down and keep it hidden from potential viewers.

• If you forget the lock code, a new code may be set using the steps listed above.

37

7/11/03, 9:32:48 AM AV-56\65WP84 English 37

Initial Setup

Adjusting CRT Color Convergence

This TV has three color projection tubes: one for red, green, and blue. When mixed together in the proper portions, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The produce of aligning these picture beams is called “convergence”.

Attention:

• Please have your TV on for at least 20 minutes before using this feature.

• This adjustment will be needed only when the colors of the characters/lines are separated and lack in distinction. If not, please don’t perform the adjustment.

Colors may become separated after the TV has been moved, or over a long period of time if regularly subjected to low levels of vibrations. If the colors become separated, please perform the adjustments below again. In the beginning, please be sure to perform AUTO convergence adjustment.

Auto


√® To Enter

π To select “AUTO” (The convergence adjustment will start.

It will take about 50 seconds).

When the adjustment is finished, it will return to what you were watching.

Note:

• You can reset the adjustment if you do not like the results. See the next page.

• If you want to adjust it more, you can perform the manual color convergence adjustment.

See the next page.

• You can also access this feature by pressing the S UPER F OCUS button on the front panel of your TV.

38

AV-56\65WP84 English 38 7/11/03, 9:32:48 AM

Initial Setup

Adjusting CRT Color Convergence (continued...)

Manual

Press the M

ENU

button

√® To Enter

√® To Enter

If all the lines are white, no convergence adjustment is

necessary. If not, you need to perform the manual color convergence below.

Select the location you want to adjust by using the number buttons on the remote control.

You can select any of the 63 points.

Press the S

ELECT

button to change the color of the

box to the color of the cross you wish to adjust (red or blue).

√® Adjust the position of the cross.

Adjust the three color crosses until they overlap and appear as a single white cross.

Press the O

K

button

Notes:

• When you adjust the convergence, make sure you start with the center position (position 5), and work your way around radially for best results.

• When you make the adjustment in the center (position 5), you are making the adjustment for the whole screen. In other positions, you are making the adjustment only in that area.

• You can reset the adjustment if you do not like the results. See below.

• If you perform AUTO CONVERGENCE after performing MANUAL CONVERGENCE, your manual convergence you performed will be cancelled.

Reset

RESET resets all convergence adjustments to the factory default settings.

Press the M

ENU

button

√® To Enter

√® To enter

When the adjustment is reset, it will return to what you were watching.

39

AV-56\65WP84 English 39 7/11/03, 9:32:49 AM

Initial Setup

Auto Demo

Your TV is equipped with D.I.S.T 1500i. This feature allows you to view the demonstration in picture quality with D.I.S.T 1500i on or off.


√® To turn AUTO DEMO ON

(The Auto Demo starts.)

(appears for three minutes)

To stop AUTO DEMO

Press the B

ACK

button

(appears for one minutes)

Language

The language function is described on page 20 as the interactive plug-in menu. If you need to choose the language again, follow the steps below.

Press the Menu button

π† To LANGUAGE

√® To choose a language: ENG. (English), FRAN.

(French) or ESP. (Spanish)

Press the M

ENU


40

AV-56\65WP84 English 40 7/11/03, 9:32:49 AM

Initial Setup

Closed Caption

Many broadcasts now include an onscreen display of dialog called closed captions. Some broadcasts may also include displays of additional information in text form. Your television can access and display this information using the closed caption feature. To activate the closed caption feature, follow the steps below.

Press the M

ENU

button

π† To CLOSED CAPTION

√® To

π† To select CAPTION or TEXT

√® To select a caption (CC1 to CC4) or text channel

(T1 to T4)

Press the OK button to save

Press the M

ENU


Notes:

• Closed caption subtitles are usually found on closed caption channel CC1. Some programs may include additional text information which is usually found on text channel T1. The other channels are available for future use.

• Closed captioning may not work correctly if the signal being received is weak or if you are playing a video tape.

• Most broadcasts containing closed captioning will display a notice at the start of the program.

• To select the mode, press the C.C. button. See page 59.

Auto Shut Off

This function automatically shuts off your TV when there is no signal from the channel the

TV is on.

Press button

π† To AUTO SHUT OFF

√® To turn ON or OFF

Press the M

ENU


• If the channel that you have on does not receive a signal for more than one minute, the blinking text

“NOT RECEIVING A SIGNAL” appears on the screen, and starts the countdown. If no signal is being received within

10 minutes, the TV shuts itself off.

41

7/11/03, 9:32:50 AM AV-56\65WP84 English 41

Initial Setup

XDS ID

XDS ID Display provides a channel’s call letters, the network’s name, and even a program name. The XDS ID information is provided by the broadcaster.

Press the M

ENU

button

To ID


Press the M

ENU


Noise Muting

This feature inserts a blank blue screen over channels which are not broadcasting or are too weak to be received clearly.


π† To NOISE MUTING

√® To turn noise muting ON or OFF

Press the M

ENU


Note:

• Noise muting will not work during auto tuner setup or when you operate channel summary.

Front Panel Lock

This allows you to lock the keys on the front of the TV, so that a child may not accidentally change your viewing preferences.

Press the M

ENU

button

π† To FRONT PANEL LOCK


Press the M

ENU


You can turn off this feature in the following ways:

• Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your remote control.

• Use the remote control.

• Press the M

ENU

button on the front of the TV for more than 3 seconds. In this case, the OSD for FRONT PANEL LOCK will appear.

Note:

• To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will remain ON.

42

AV-56\65WP84 English 42 7/11/03, 9:32:51 AM

Initial Setup

V1 Smart Input

This feature is used if you have connected an AV Receiver to your television. By turning this feature on, your television can automatically detect the signal source from your components that are connected to your AV Receiver.


π† To V1 SMART INPUT


Press the MENU button when finished

Notes:

• If you do not have an AV Receiver connected to your television, turn this feature OFF. By doing so, you can take advantage of using AV CompuLink components with your television.

• Some AV Receivers may not work with this function.

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema, or full.

Press the M

ENU

button

π† To POSITION ADJUSTMENT

√® To enter

√® To adjust the position

Press the M ENU button to finish

Notes:

• To reset the adjustment to the center, press the O

K

button.

• When the arrow disappears, while you are adjusting the position, the position is at it’s maximum limit.

• If you select regular size with aspect or Multi Screen, position adjustment option is not seen.

• When you change the screen size, perform the position adjustment again.

• Position adjustment allows you to adjust the screen position vertically and horizontally when the aspect is set HD panorama or cinema zoom for 1080i signal.

Power Indicator

Power indicator allows you to adjust the brightness of the power indicator


√® To adjust POWER INDICATOR LOW, HIGH or OFF

Notes :

• When OFF is selected :

The LED disappears if the you have a TV signal.

The LED is lit as “LOW” when there is no TV signal.

43

AV-56\65WP84 English 43 7/11/03, 9:32:51 AM

Initial Setup

TV Speaker

If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio through your stereo.

Press the M

ENU

button

π† To TV SPEAKER

√® To turn the TV’s speakers ON or OFF

Press the MENU button when finished

Notes:

• Before you turn the TV speaker setting from OFF to

ON, make sure that the TV volume level is low! If the

TV volume is set too high, the sound level will be extremely loud.

• After a power interruption, the TV speaker settings will return to “ON”.

Audio Out

If your television is connected to an external speaker source, audio out gives you the option of controlling the volume level with your TV’s remote control.

Press the M

ENU

button

√® To VARI or FIX

Press the M

ENU


VARI: Lets you adjust the volume of the external speakers using the V OLUME +/– buttons on your TV’s remote control.

FIX: The volume of the external speakers is adjusted using the audio device’s remote control.

Center CH Input

When you are using a surround system, you can substitute the speaker of this television for the center speaker of you surround system. Set CENTER CH INPUT to on when you use the speaker as the center speaker of your surround system.

Press the M

ENU

button

π† To CENTER CH INPUT

√® To adjust CENTER CH INPUT to “ON” or “OFF”

Press the M

ENU


44

AV-56\65WP84 English 44 7/11/03, 9:32:52 AM

Initial Setup

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p picture signal is being displayed on the screen. There are two types of 480p picture signals:

640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.

Press the M

ENU

button

√® To enter

√® To select SIZE1 or SIZE2

Press the M

ENU

button to finish

Note:

The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the

Digital-In terminal and the picture is being displayed on the screen.


45

7/11/03, 9:32:52 AM

Picture Adjust

Picture Settings

These settings allow you to change and adjust the way the picture appears on your television.

TINT

Tint allows you to adjust the levels of red and green in your TV picture.

COLOR

The color function lets you make all the colors in the TV picture appear either more vivid or subtle.

PICTURE

Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker or brighter picture overall.

BRIGHT

You can adjust the overall brightness of the TV picture with the Bright control.

DETAIL

The Detail feature adjusts the level of fine detail displayed in the picture.

Adjust the Picture Settings

Press button

π† To TINT, COLOR, PICTURE, BRIGHT or

DETAIL

√ ® To

√ ® To adjust the setting

π† To move to the next setting


Color Temperature

You can decide how strong or dull the colors appear on the TV screen.

Press the M

ENU

button

√® To

√® To set LOW or HIGH

Press the M

ENU


46

AV-56\65WP84 English 46 7/11/03, 9:32:52 AM

Picture Adjust

Digital Noise Clear

With digital noise clear, this helps take our static or noise from a channel that may not be coming in clearly.

Press the M

ENU

button

π†

√®

To DIG. NOISE CLEAR

To

π† To select the mode “LOW”, “HIGH” or “OFF”

Press the M ENU button when finished

(VSM) Velocity Scan Modulation

Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help accentuate the differences in picture brightness to sharpen the edges of images.


π†

√®

To VSM

To

√® To turn VSM ON or OFF

Reset

Reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature, dig. noise clear and VSM) at once to the default settings.

Press the M

ENU

button

√® To

The onscreen menu disappears for a moment, and then the settings are reset to the default setting for all the picture adjustments.

Press the M ENU button when finished

47

7/11/03, 9:32:53 AM AV-56\65WP84 English 47

Sound Adjust

Sound Settings

These settings allow you to change and adjust the sound on your television.

BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with the bass adjustment.

TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.

BALANCE – Adjust the level of sound between the TV’s left and right speakers with the balance setting.

Adjust the Sound Settings

Press the M

ENU

button

π† To BASS, TREBLE or BALANCE

√ ® To adjust the setting

π† To move to the next setting

Press the M

ENU


Note:

• You can reset the sound adjustments (BASS, TREBLE and

BALANCE) you set at once as the default setting when you select reset. See page 47.

• You can adjust BALANCE only when A.H.S. is off. See page 55.

MTS (Multi-Channel Television Sound)

MTS technology allows several audio signals to be broadcast at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an

MTS broadcast may also include a second audio program (SAP) .

Press button

π† To MTS

√® Select the mode

(The ON AIR arrow tells you if a broadcast is in stereo and/or contains an SAP).


Notes:

• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo mode even if a certain broadcast is in mono sound only.

• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.

• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

• MTS unavailable if your television’s input source is in input 1, 2, 3 or 4 mode, as described on page 54.

Reset

Reset resets all Sound Adjustments (Bass, Treble and Balance) at once to the default settings.

See page 47 on how to use reset.

48

AV-56\65WP84 English 48 7/11/03, 9:32:53 AM

Clock/Timers

Set Clock

The set clock function is described on page 21 as the interactive plug-in menu. You can choose to set the clock automatically, or manually. If you need to set the clock again, follow the steps below.

Press the M

ENU

button

To CLOCK

√® To

When you set the clock automatically, choose AUTO by pressing the √ or ® arrows.

π† To TIME ZONE

√® To select your time zone

π† To D.S.T. (daylight savings time)

√® To turn D.S.T. ON or OFF

Press OK to finish

Press the M

ENU


When you set the clock manually, choose MANUAL by pressing the √ or ® arrows.

π† To move to the hour

√® To set the hour

π† To move to minutes

√® To set the minutes

Press OK to start clock

Press the M

ENU


49

7/11/03, 9:32:54 AM AV-56\65WP84 English 49

Clock/Timers

On/Off Timer

The on/off timer lets you program your television to turn itself on or off. You can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home.

Press button

π† To ON/OFF TIMER

√® To operate (begins with ON TIME)

√® To set the hour (AM/PM) you want the TV to turn on

† To move to minutes

√® To set the minutes

† To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the OFF TIME the same way as ON TIME

† To accept OFF TIME and move to CHANNEL

√® To select channel

† To ON VOLUME

√® To set the volume level

† To move to MODE

√® Choose ONCE or EVERYDAY

√® Choose YES to accept the timer setting, choose NO if you don’t wish to accept

Press the OK button to finish

Press the M

ENU

button to exit the menu

Notes:

• The on/off time cannot be set to locked or guarded channels.

• In order for the on/off timer to work, the clock must be set.

• After a power interruption, the timer settings must be reset.

50

AV-56\65WP84 English 50 7/11/03, 9:32:54 AM

Button Functions

Multi Screen Function

Your television has three kinds of screen: SPLIT (2 channels), POP (4 channels), and INDEX

(12 channels).

Note: After you press any multiscreen button, if you press the menu button, only the picture adjust screen will appear.

Split

Activate the split-screen option by pressing S

PLIT

on the remote control.

Two channels (or input) will now appear onscreen.

The channel (or input) you were watching before pressing S

PLIT

will appear on the left, the new channel will appear on the right. The sound will continue to come from the main screen channel (or input). To turn split-screen off and return to normal television viewing, press S

PLIT

again or press the

B

ACK

button.

Note:

• You can enter the SPLIT mode when the screen is in NORMAL, POP or INDEX mode.

• Split-screen functions will not work with locked channels or channels blocked by V-Chip ratings limits. A grey screen will display instead.

• With split screen, the picture from the component terminal and HDCP terminal will not be displayed.

• The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of

480p, 720p and 1080i from the component terminal and HDCP terminal.

• After you press the S ELECT button, and select SPLIT SCREEN when you press the

OK button, select normal screen. If you don’t operate, the MAIN CHANNEL SCREEN will be automatically selected about 8 seconds later.

• Main channel picture and split-screen will not display the same RF channel.

51

7/11/03, 9:32:55 AM AV-56\65WP84 English 51


POP

You can view three separate pictures (still images) on screen on the right side of the TV’s main picture. The picture of the still image will be renewed in order (from top to bottom).

SEPARATE PICTURES

MAIN PICTURE

To change the channel of separate pictures:

• Press the S

ELECT

button and select the separate picture which you want to change. Press the N

UMBER

buttons and select the channel.

To display the channel of the separate picture on the full screen:

• Press the S

ELECT

button and select the separate picture which you want to display on the full screen. Press the OK button.

Notes:

• This function will not work when the picture from all external input is displayed.

• SWAP function will not work.

Cable Box Note:

The 2–Tuner Multi Screen function may not operate when used with certain cable boxes.

This is because while some models of cable boxes may receive up to 181 channels, and may only send the signal from one channel to your television. (Please refer to diagram on page

13). For the 2–Tuner Multi screen function to operate correctly, it must have access to all available channels. Since the television is receiving the signal from only one channel from the cable box, it is impossible for the 2–Tuner Multi screen function to display a second, different channel. Because there are many different models of cable boxes in use today, if you are having problems operating your 2–Tuner Multi screen function feature with your cable box, we recommend you contact your local cable company for connection advice.

Index

This allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch.

Notes:

• Only RF input signal will be displayed.

• You can watch the channel added in channel summary. See page 30.

52

AV-56\65WP84 English 52 7/11/03, 9:32:55 AM


EZ-Surf

EZ-Surf allows you to surf all the available channels so that you don’t have to change your current program to see what else is on TV.

Press the EZ S URF button.

• When you press the EZ S URF button, it will scan through all the channels you can receive, and display the channel information on the lower of the TV screen.

• If you are using the POP/INDEX feature, it will be cancelled when you press the EZ S

URF

button.

• When you are in SPLIT MODE and you press the

EZ S URF button, your TV screen will look like this. The left side is the current program, and the right side will scan through all of the available channels you can receive.

Freeze

Pressing the F REEZE button causes the screen to change to the split-screen display with the still picture displayed on the right. In order to return to the normal display, press the F

REEZE

button once again.

Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this function will cancel out.

Swap

You can exchange the channel (or input) displayed in the split screen window for the main screen image by pressing the S WAP button.

Note: This function will not work with POP screen. It will only work in SPLIT mode.

Select

With SELECT, you can select the picture (channel) while viewing POP or SPLIT screen. When you press S ELECT button, the channel number on the top will be highlighted. Each press of

S

ELECT

will shift the channel.


53

7/11/03, 9:32:56 AM


Power

Turns the TV on or off.

Press the P

OWER

button

Number Buttons - 10Key Pad

Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7:

100+ Button

Use the 100+ button to directly access channels above channel 99. For example, to move to channel 124, press 100+, 2 (Two), 4 (Four).

Input

Selects the signal input source for the television: Input-1, 2, 3 or 4 for video devices like VCR’s

DVD players, or camcorders.

I

NPUT

1, 2, 3, 4

Notes:

• When you return to TV mode, press the R

ETURN

+/T

V

button or direct 10 key pad.

• You can also access the FRONT CONTROL PANEL screen by using the M ENU button on the front of the TV instead of the remote control. It appears between INITIAL SETUP and

PICTURE ADJUST screen, and it has INPUT and ASPECT menus. Choose INPUT or

ASPECT by pressing M

ENU †

C

HANNEL

+/- buttons ( √ OPERATE ® ).

Digital-In

Use this button to directly select the digital-in input.

Press the D

IGITAL

-I

N

button

• Digital-In on the menu will display only when the 480p picture signal in Digital-In is displayed.

Channel +/–

Use these buttons to move up or down all the available channels your TV is able to receive.

Volume +/–

Use these buttons to raise or lower the TV’s volume level.

54

AV-56\65WP84 English 54 7/11/03, 9:32:56 AM


Return +/TV

The return+/TV button has three functions:

Return - Returns to the channel viewed just before the channel currently onscreen.

Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons.

TV - Returns to the TV mode.

R

ETURN

+/T

V

and hold for three seconds

The channel currently active has been programmed as your return+ channel. Now scan through the channels using the C HANNEL +/– buttons.

R

ETURN

+/T

V

You will return to your programmed channel.

• To cancel your return+ channel, press and hold the R

ETURN

+ button for three seconds. The message “RETURN CHANNEL CANCELLED!” will appear.

• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel return+.

Sound

By pressing the sound button, you can change the A.H.S. (Advanced Hyper Surround) mode and BBE on or off.

A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more effect.

BBE - BBE high definition audio adds natural, clear and extraordinary sound quality to any program.

Press the S OUND button

π† To select A.H.S. or BBE

√® To choose the setting

Press the M

ENU

when finished

Note: BBE is a registered trademark of BBE Sound, Inc. For U.S., licensed from BBE Sound,

Inc. under USP 4638258, 4482866 and 5510572. For Canada, licensed from BBE Sound,

Inc. BBE is a registered trademark of BBE Sound, Inc.

Muting

The M UTING button instantly turns the volume down completely when you press it. Press

M

UTING

and the volume level will instantly go to zero. To restore the volume to its previous level, press M UTING again.

55

AV-56\65WP84 English 55 7/11/03, 9:32:56 AM


Video Status

The

V ideo status button gives you a choice of four TV picture display settings, including a display of your own preferences.

Standard - Resets the picture display to the factory settings.

Dynamic - Gives a vivid picture with better contrast when viewing in a brightly lit room.

Theater - Gives a rich, film-like look to video when viewing in a dimly lit room.

Game - Used for when you are playing video games connected to your TV.

Press the V

IDEO

S

TATUS

button

By every press of the V

IDEO

S

TATUS

button, you change the mode.

Note: You can also change the mode by pressing the π† buttons.

Natural Cinema

Natural cinema corrects the problem of blurred edges which may occur when viewing a program originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges of these programs, press N ATURAL C INEMA and set it to AUTO. Natural Cinema helps correct conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the television rate of 30 frames-per-second.

Press the N

ATURAL

C

INEMA

button

Notes: The natural cinema mode is automatically set to “AUTO” in the following cases:

• Turning on or off

• Changing the channel or input mode

• Using multi-screen functions

TheaterPro D6500K

The TheaterPro D6500K color temperature technology function makes sure that the video you watch is set to the standard color temperature, so that what you see is as true to what the film to video editors intended it to be.

Press P

RO

button

56

AV-56\65WP84 English 56 7/11/03, 9:32:57 AM


Sleep Timer

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals of 15 minutes, for a total time of up to 180 minutes.

Press the S

LEEP

T

IMER

button

Sleep Timer Message

20 seconds before the automatic shutoff, this message will appear:

You then have 20 seconds to press the S LEEP T IMER button to delay the shut off for another 15 minutes.

Display

The display screen shows the current status of timers, inputs, and XDS ID.

Press the D ISPLAY button

The screen to the right shows the following information:

• The current channel or AV input (Channel 05)

• The current time (12:20 pm)

• Sleep timer status/minutes remaining (The Sleep Timer is off)

• On/off timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)

• Each Press of the D

ISPLAY

button changes the display mode:

Display - Full screen shown above

Time - Shows the current time only

Channel - Shows the current channel

Off - Turns display off

Notes:

• You may also turn off the display at any step by pressing M ENU .

• If the clock, sleep timer or on/off timer are not set, the display screen will show:

“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.


57

7/11/03, 9:32:57 AM


Aspect

This feature will help you adjust the picture you are watching to give you the best possible picture quality.

Aspect Ratios

PANORAMA - With this ratio a normal

4:3 aspect picture is stretched to fit the dimensions of the 16:9 aspect screen.

REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your

16:9 screen. The 4:3 picture will fill the screen from top to bottom, while black bars will appear to fill up the remaining space along the picture’s sides. The 4:3 picture will be centered within the boundaries of the

16:9 screen.

CINEMA - This ratio “zooms in” on the center part of a 4:3 aspect picture, blowing it up to fill the 16:9 screen.

FULL - This is the ratio to use when watching 16:9 High-Definition broadcasts.

CINEMA ZOOM - This ratio stretches the High-Definition 16:9 aspect image to eliminate the black surrounding bars.

HD PANORAMA - This ratio stretches the High-Definition 16:9 aspect image to eliminate the black side bars.

58

AV-56\65WP84 English 58 7/11/03, 9:32:58 AM


Aspect Ratios (Continued)

Press button

• SPECT button, you can change the size.

When you change the aspect ratios, it is different from their broadcast or recorded program.

NTSC, 480i, 480p,

HDCP 480p HD, HDCP 1080i 720P, HDCP 720p

Notes:

• You can also choose the size by pressing the π† buttons.

• When you change the aspect ratio or signal, reset the picture position to center.

C.C. (Closed Caption)

Use the C.C. (Closed Caption) button to select the mode of closed caption.

Press the C.C. button

• See page 41 when you set the caption/text mode.

Menu

The M

ENU

button allows you to access JVC’s onscreen menu system. Press M

ENU

to activate the onscreen menu system.

• See individual topics like “Sound Adjust” for specific information on using menus.

OK

This button confirms your selection when you are in one of the onscreen menus.

Back

This button allows you to go back in the menu to change a selection or correct a mistake.


59

7/11/03, 9:32:58 AM


TV/CATV Slide Switch

Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.

Note:

• See page 23 for information on programming your remote for cable box operation.

VCR/DVD Slide Switch

You can control a VCR or DVD player with the buttons on the lower part of the remote control.

Move the slide switch to VCR or DVD to operate.

Notes:

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s brand VCR, please see the code chart and instructions on page 24.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer’s brand DVD player, please see the code chart and instructions on page 25.

VCR Buttons

You can use this remote control to operate the basic functions of your VCR. These functions include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and power off.

Move the selector switch to VCR to operate.

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s brand VCR, please see the code chart and instructions on page 24.

DVD Buttons

You can also use this remote control to operate the basic functions of your DVD player. These functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power on, and power off.

Move the selector switch to DVD to operate.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer’s brand DVD player, please see the code chart and instructions on page 25.

Light

All remote control buttons are illuminated, except for the TV/CATV slide switch, VCR/DVD slide switch and Light button. Press the L IGHT button to turn the illumination on for 4 seconds.

Super Focus

This button is only located on the front panel of your TV. When you press the S

UPER

F

OCUS button on the front of the TV, you can access the auto convergence mode in the convergence menu screen automatically. See page 38.

60

AV-56\65WP84 English 60 7/11/03, 9:32:59 AM

No Program

If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears when that channel is not receiving a signal and you have the Noise Muting function OFF and you have a single screen. It moves automatically every two seconds to prevent the screen from burn-in. See page 6.

Note:

• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off functions that you set, are still active.


61

7/11/03, 9:32:59 AM

Troubleshooting

62

AV-56\65WP84 English 62 7/11/03, 9:32:59 AM

Troubleshooting


63

7/11/03, 9:33:00 AM

Warranty

JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE

MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period shown below. (“The Warranty Period”)

PARTS 1 YEAR LABOR 1 YEAR

This limited warranty is valid only in the fifty (50) United States, The District of Columbia and Commonwealth of Puerto Rico.

WHAT WE WILL DO:

If this product is found to be defective within the warranty period, JVC will repair or replace defective parts at no charge to the original owner.

Such repair and replacement services shall be rendered during regular business hours by JVC authorized service centers. Parts used for replacement are warranted only for the remainder of this Warranty Period. Televisions with a screen size of 25 inches and larger are covered on an in-home basis.

WHAT YOU MUST DO FOR WARRANTY SERVICE:

Either contact the selling dealer (retailer) or call 1-800-252-5722 to arrange In-home service. In-home service will require clear access to the Television by the service technician.

WHAT IS NOT COVERED:

This limited warranty provided by JVC does not cover:

1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to render such service, or if affixed to any attachment not provided with the products, or if the model or serial number has been altered, tampered with, defaced or removed. AV-65WP84 ONLY: If the upper unit is removed from the lower unit by anyone other than a dealer or service facility authorized by

JVC.

2. Initial installation, installation and removal from “built-in” entertainment centers and other mounting systems.

3. Operational adjustments covered in the Owner’s Manual, normal maintenance, including head cleaning.

4. Damage that occurs in shipment, due to an act of God, and cosmetic damage.

5. Signal reception problems and failures due to line power surge.

6. Products used for commercial purposes (including but not limited to rental).

7. Accessories.

8. Batteries (except that Rechargeable Batteries are covered for 90 days from date of purchase).

There are no express warranties except as listed above.

64

AV-56\65WP84 English 64 7/11/03, 9:33:00 AM

Warranty

THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY

OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY

HEREIN.

JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT,

INCONVENIENCE, OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR

CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS

OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY

BREACH OF THIS WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING

THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE,

ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion of incidental or consequential damages or limitations on how long the warranty lasts, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary state to state.

JVC COMPANY OF AMERICA

DIVISION OF JVC AMERICAS CORP.

1700 Valley Road

Wayne, New Jersey 07470 http://www.jvc.com

REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY. THIS WARRANTY DOES

NOT APPLY. FOR DETAILS OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER

TO THE REFURBISHED PRODUCT WARRANTY INFORMATION PACKAGED WITH EACH

REFURBISHED PRODUCT.

For customer use:

Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet.

Retain this information for future reference.

Purchase Of

65

7/11/03, 9:33:00 AM AV-56\65WP84 English 65

Authorized Service Centers

QUALITY SERVICE

HOW TO LOCATE YOUR JVC SERVICE CENTER

TOLL FREE: 1 (800) 537-5722 http://www.jvc.com

Dear Customer,

In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repairs are necessary, call our Customer Relations

Department at 1-800-537-5722 or visit our website at www.JVC.com

Remember to retain your Bill of Sale for Warranty Service.

Don’t service the television yourself

Caution

To prevent electrical shock, do not open the cabinet. There are no user serviceable parts inside. Please refer to qualified service personnel for repairs.

Accessories

To purchase accessories for your JVC product, please call toll free:1 (800) 882-2345 or on the web at www.JVC.com

66

AV-56\65WP84 English 66 7/11/03, 9:33:00 AM

Specifications

Specifications subject to change without notice.


67

7/11/03, 9:33:01 AM

Notes

68

AV-56\65WP84 English 68 7/11/03, 9:33:01 AM

Notes


69

7/11/03, 9:33:01 AM

Notes

70

AV-56\65WP84 English 70 7/11/03, 9:33:01 AM

Notes


71

7/11/03, 9:33:01 AM

JVC COMPANY OF AMERICA

Division of JVC Americas Corp.

1700 Valley Road

Wayne, New Jersey, 07470


JVC CANADA, INC.

21 Finchdene Square

Scarborough, Ontario

Canada, M1X 1A7

7/11/03, 9:33:01 AM

No results