PDi PDI-Z15LCD Installation Instructions

Communication

Systems Inc.

Better Solutions Are Within Reach™

STEP 1. Attach Monitor to Arm

PDI-Z15LCD Page 1 of 1

INSTALLATION INSTRUCTIONS

Fasten mounting plate “A” to swivel bracket “B” using (4) #10 flat washers and (4)

10-32 hex nuts provided.

STEP 2. Cable Connections

Connect the antenna cable to the “ANT IN”.

Connect the power cable to “DC 12V”.

For computer operation connect computer VGA cable to “PC/D-TV INPUT” and audio cables to “L AUDIO R”.

STEP 3. Cable Cover

Attach cable cover “C” to swivel bracket “B”. Insert tabs “D” into slots “E”, being careful to not pinch any wires. Align (4) holes in “B” and “C”. Install (4) 8-32 x

3/8 Phillips head machine screws.

NOTE: POWER SWITCH

Some models are equipped with a hidden power switch that is located on the lower left side of the display. If so equipped, turn the rocker switch to the ON position after installation.

PDI Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 FX +1-937-743-5664

PD196-013 Rev 1