Electrolux D7-425S Error codes

User manual
Tumble dryer
D7–425S
Type N3...
Original instructions
438909793/EN
2025.07.09
Contents
Contents
1 Safety Precautions ..............................................................................................................................5
1.1 Additional safety precautions for gas heated tumble dryer .............................................................7
1.2 General safety information..........................................................................................................7
1.3 Commercial use only..................................................................................................................7
1.4 Copyright ..................................................................................................................................7
1.5 Symbols....................................................................................................................................8
2 Program description ............................................................................................................................9
2.1 General.....................................................................................................................................9
2.2 Program description .................................................................................................................10
3 Handling ...........................................................................................................................................13
3.1 Load .......................................................................................................................................13
3.2 How to start the machine ..........................................................................................................14
3.3 Additional functions..................................................................................................................15
3.4 When program has ended ........................................................................................................15
4 Error codes .......................................................................................................................................16
5 Maintenance .....................................................................................................................................17
5.1 General...................................................................................................................................17
5.2 Time for maintenance...............................................................................................................17
5.3 Every day ................................................................................................................................17
5.4 Fresh air intake........................................................................................................................18
5.5 Machines with residual moisture control (RMC) ..........................................................................18
5.6 Maintenance to be carried out by qualified service personnel ......................................................18
6 Disposal information ..........................................................................................................................19
6.1 Appliance recyclability and disposal ..........................................................................................19
6.1.1 Recyclability...................................................................................................................19
6.1.2 Procedure regarding appliance disposal and component / material recovery .......................19
6.2 Disposal of packing ..................................................................................................................19
The manufacturer reserves the right to make changes to design and component specifications.
User manual
5
1 Safety Precautions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Servicing shall be carried out only by authorized personnel.
Only authorized spare parts, accessories and consumables shall be used.
The machine is not to be used if industrial chemicals have been used for cleaning.
Do not dry unwashed items in the machine.
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed
in hot water with an extra amount of detergent before being dried in the machine.
Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber
backed articles and clothes or pillows fitted with foam rubber pads should not be dried
in the machine.
Fabric softeners or similar products should be used as specified by the fabric softener
instructions.
The final part of a drying cycle occurs without heat (cool down cycle) to ensure that the
items are left at a temperature that ensures that the items will not be damaged.
Remove all objects from pockets such as lighters and matches.
WARNING. Never stop the machine before the end of the drying cycle unless all items
are quickly removed and spread out so that the heat is dissipated.
Adequate ventilation has to be provided to avoid the back flow of gases into the room
for appliances burning other fuels, including open fires.
Exhaust air must not be discharged into a flue which is used for exhausting fumes from
appliances burning gas or other fuels.
The machine must not be installed behind a lockable door, a sliding door or a door with
a hinge on the opposite side to that of the machine in such a way that a full opening of
the machine is restricted.
If the machine has a lint trap this has to be cleaned frequently.
The lint must not be accumulated around the machine.
DO NOT MODIFY THIS APPLIANCE.
When performing service or replacing parts, the power must be disconnected.
When the power is disconnected, the operator must see that the machine is disconnected (that the plug is removed and remains removed) from any point to which he has
access. If this is not possible, due to the construction or installation of the machine, a
disconnection with a locking system in the isolated position shall be provided.
In accordance with the wiring rules: mount a multi-pole switch prior to the machine to
facilitate installation and service operations.
Stationary appliances not fitted with means for disconnection from the supply mains
having a contact separation in all poles that provide full disconnection under overvoltage category III, means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
WARNING: The appliance must not be supplied through an external switching device,
such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
If different rated voltages or different rated frequencies (separated by a /) are stated at
the machine data plate, instructions for adjusting the appliance for operation at the required rated voltage or rated frequency are stated in the installation manual.
The openings in the base, shall not be obstructed by a carpet.
6
User manual
• Oil-affected items can ignite spontaneously, especially when exposed to heat sources
such as in a tumble dryer. The items become warm, causing an oxidation reaction in
the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot
enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from
escaping and so create a fire hazard.
• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed
in hot water with extra detergent – this will reduce, but not eliminate, the hazard.
• Maximum mass of dry cloth: 2 x 23.5 kg.
• A-weighted emission sound pressure level at working stations: 70 dB(A).
• Additional requirements for the following countries; AT, BE, BG, HR, CY, CZ, DK, EE,
FI, FR, DE, GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH,
TR, UK:
– The appliance can be used in public areas.
– This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Additional requirements for other countries:
– This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
User manual
7
1.1 Additional safety precautions for gas heated tumble dryer
• Before installation, check that the local distribution conditions, nature of gas and pressure and the adjustment of the appliance are compatible.
• The machine is not to be installed in rooms containing cleaning machines with perchloroethylene, TRICHLOROETHYLENE or CHLOROFLUOROCONTAINING HYDROCARBONS as cleaning agents.
• NOTE: it is pointed out that the connection and commissioning of appliances complying
with this standard are subject to observance of the installation regulations in force in
the countries where these appliances are marketed.
• Connection to the appliance shall be made with a flexible hose suitable for the appliance category in accordance with national installation regulations of the country of destination and that in case of doubt the installer shall contact the supplier.
• The appliance should be installed on non-flammable materials for the floor, worktop
and/or wall close to the appliance if required.
• If you can smell gas:
– Do not switch on any equipment
– Do not use electrical switches
– Do not use telephones in the building
– Evacuate the room, building or area
– Contact the person responsible for the machine
1.2 General safety information
In order to prevent damage to the electronics (and other parts) that may occur as the result of condensation, the machine should be placed in room temperature for 24 hours before being used for the first time.
1.3 Commercial use only
The machine/machines covered by this manual is/are made for commercial and industrial use only.
1.4 Copyright
This manual is intended solely for consultation by the operator and can only be given to third parties with the permission of Wascomat.
User manual
8
1.5 Symbols
Caution
Caution, hot surface
Caution, high voltage
Warning, risk of fire / flammable material
Danger, crush hazard
Read the instructions before using the machine
User manual
2 Program description
2.1 General
The machine is equipped with a number of programs adapted to the range of use to which the machine is intended
— different markets use different programs. The following program description is a short description of some examples of programs that can be used.
For best possible drying result it is advisable to dry garments of the same quality for each drying cycle.
9
10
User manual
2.2 Program description
There are two types of programs, automatic programs and time programs.
• Automatic programs has moisture detection and will stop when selected dryness is achieved.
• Time programs has no moisture detection and will stop when the preset or selected time has ended.
During a drying cycle, when the square in the lower right corner is fully ticked, it indicates that the heating unit is active / ON. The heating unit can be gas, electric, steam or heat pump type.
If the square box is not ticked, it doesn’t mean the heating unit is abnormal. This box is just monitoring the status of
the heating unit and shows if it is Active / ON or Inactive / OFF.
• A = Active / ON
• B = Inactive / OFF
=A
=B
fig.X01995
User manual
11
Automatic programs
Program name
and display
symbol
Care label
Program description
NORMAL TEMP
EXTRA DRY
Normal temperature.
The program will stop automatically when the garments are extra dry.
LOW TEMP
EXTRA DRY
Low temperature.
The program will stop automatically when the garments are extra dry.
NORMAL TEMP
DRY
Normal temperature.
The program will stop automatically when the garments are dry.
LOW TEMP
DRY
Low temperature.
The program will stop automatically when the garments are dry.
NORMAL TEMP
IRON DRY
Normal temperature.
The program will stop when the garments still are a bit damp.
LOW TEMP
IRON DRY
Low temperature.
The program will stop when the garments still are a bit damp.
LOW TEMP
DOWN
Low temperature.
The drying time has to be adjusted according to garment type to achieve the desired dryness.
This program is suitable when drying for example duvet jacket, duvet quilt, duvet pillow.
LOW TEMP
SENSITIVE
Low temperature.
This program is suitable when drying for example man made fiber textiles like polyester, polyamide,
natural fiber textiles (silk textiles).
WOOL
Normal temperature.
The program will stop before the garments are totally dry — which protects the garments.
This very gentle program is suitable when drying for example woolen garments of more or less all
types. For example blankets, jackets etc.
LOW TEMP
MOPS
Low temperature.
The program will stop when the mops are dry.
This program is suitable when drying for example synthetic microfibre mops.
LOW TEMP
CLOTHS
Low temperature.
The program will stop when the cloths are dry.
This program is suitable when drying for example synthetic microfibre cloths.
NORMAL TEMP
LARGE TEXTILES
Normal temperature.
The program will stop automatically when the fabric is dry.
This program is suitable when drying large fabrics such as bed sheets, table cloths, curtains etc.
The program is built to prevent the fabric from tangling together.
LOW TEMP
LARGE TEXTILES
Low temperature.
The program will stop automatically when the fabric is dry.
This program is suitable when drying large fabrics such as bed sheets, table cloths, curtains etc.
The program is built to prevent the fabric from tangling together.
User manual
12
Time programs
Program name
and display
symbol
Care label
Program description
NORMAL TEMP
DRIES SET TIME
Normal temperature.
Different drying times can be selected.
The program will stop when the time is up.
LOW TEMP
DRIES SET TIME
Low temperature.
Different drying times can be selected.
The program will stop when the time is up.
AIRING
DRIES SET TIME
Without heat.
Different drying times can be selected.
The program will stop when the time is up.
• Programs with NORMAL TEMP are suitable for most textiles.
• Programs with LOW TEMP should be used for synthetic textiles e.g. polyester, polyamide, polyacrylic and elastan,
viscose, polycotton and delicate fabrics marked with the symbol (in the following figure) or with the text “Tumble
dry low” or similar.
fig.X01100
User manual
13
3 Handling
3.1 Load
Note!
Remove all objects from pockets and make sure there are no metal objects such as screws, pins etc. left.
Metal objects might cause damage to the drum.
fig.X04827B
Load the goods into the machine according to recommendations and close the door.
Make sure the filter compartment is clean and clean if necessary.
fig.7178
The recommended maximum load is 2 x 23.5 kg.
14
User manual
3.2 How to start the machine
Select program:
Automatic programs
Select program by pressing the up and down buttons.
Button
Example of programs
NORMAL
LOW
Start the machine by pressing the start button.
Time programs
Select program by pressing the up and down buttons.
Button
Example of programs
NORMAL
LOW
NO HEATING
Start the machine by pressing the start button.
After start it is possible to change the time for the selected program. Push the up and down buttons to set the desired
time.
Coin operated machine
Insert correct amount of coins to start the machine and/or press the start button.
After start it is possible to add time for the selected program. Insert more coins to add time.
User manual
15
3.3 Additional functions
There is a menu with additional functions available for selection after start. When pressing the start button the menu
will appear on the display.
Select from the menu by pressing the up and down buttons and press the start button to activate.
Note!
Some of the functions may not be available or active on your machine.
Pause
It is possible to pause an ongoing program.
Select PAUSE and activate.
For some machines it is also possible to pause directly when pressing the start button.
When pressing the start button again the program will continue.
End a program
It is possible to end a program after start.
Select END PROGRAM and activate.
When pressing the start button the program will be ended.
Status
Select STATUS MENU and activate.
The status menu shows the status for inlet air temp, outlet air temp, RMC and heat for the machine.
3.4 When program has ended
Note!
For the best possible drying result it is important to empty the machine as soon as the program has ended.
If the machine is not emptied as soon as the program has ended the drum will rotate in short intervals in order to keep
the goods from being wrinkled.
Clean the filter after each drying cycle for best performance.
fig.7731
User manual
16
4 Error codes
A fault in the program or in the machine is indicated by an error code on the display.
Some of these error codes can be solved easily without contacting service personnel.
Error
code
Text
Cause/Action
12:11
DRYING ERROR WITH RMC
PROGRAM
The longest permitted RMC time has been exceeded. (Applies only to machines with RMC).
The machine is overfilled or the garment is too wet.
12:12
DRYING ERROR WITH AUTOSTOP
PROGRAM
The longest permitted automatic stop time has been exceeded. (Applies only to machines with
automatic stop).
The machine is overfilled or the garment is too wet.
12:14
GAS ERROR PRESS GAS RESET
BUTTON
No flame has been detected. (Applies only to gas heated machines).
Reset by pressing the control knob until the error code text disappears.
On Coin operated machines: Reset by pressing the service button.
12:15
NO VACUUM
The machine is overfilled or the garment is too wet.
Unload some of the garment and try to start again.
12:16
VACUUM SWITCH SHORTED
The vacuum/pressure switch does not close within the set time.
Open and close the door and try to start again.
12:18
REDISTRIBUTION OF LOAD
NEEDED
Machine indicates that load is blocking the airflow.
Redistribute the load.
Restart the machine to clear error message.
20:1
O.H. DRUM MOTOR
The motor is too hot.
The machine will restart automatically when the temperature on the motor is OK (if the door
has not been opened).
30:1
O.H. FAN MOTOR
The motor is too hot.
The machine will restart automatically when the temperature on the motor is OK (if the door
has not been opened).
For other error codes or repeated error codes, disconnect the power for 30 seconds. If the error code keeps coming
back, contact authorized service personnel.
User manual
17
5 Maintenance
5.1 General
It is the responsibility of the owner of the machine/the laundry manager to make sure that maintenance is periodically
performed.
Note!
Lack of maintenance may deteriorate the performance of the machine and may cause damage to
components.
5.2 Time for maintenance
When the display is showing the message TIME FOR MAINTENANCE — contact the owner of the machine/the laundry
manager to perform maintenance (if available, a telephone number and/or a tag will also be displayed).
The machine can be used meanwhile. However, the message will keep coming back until the service is performed.
The message will disappear after about 30 seconds or if the start button is pressed.
5.3 Every day
Check that the machine does not operate with the door or the lint drawer open, if so, the machine must be placed out
of order until repairs are made.
Note!
Contact qualified service personnel to disconnect power from the affected machine.
Clean the door, door glass, door gasket, lint drawer gasket and other external parts.
fig.7732A
Check the lint drawer and the area behind the lint drawer. Clean if necessary.
fig.7733E
18
User manual
Remove any lint and dust around the machine.
5.4 Fresh air intake
At regular basis, check that the fresh air intake on the back of the machine is not clogged by lint and dust or otherwise
blocked.
Clean if necessary.
5.5 Machines with residual moisture control (RMC)
At regular basis, wipe off/clean drum and lifters with citric acid (Acidum citricum). If soap/softener residue remains, it
is recommended also to use a coarse sponge.
Lack of cleaning can affect the functionality of the residual moisture control. This can result in more moist load than
requested at program end.
5.6 Maintenance to be carried out by qualified service personnel
Contact qualified service personnel to perform the following maintenance:
After 1600 hours of operation or once a year, whichever comes first:
• Clean the fan, the exhaust duct and the fresh-air intake to the room
• Clean the area around the drum
• Clean the fan wheel
• Clean the motors
• Check the belt tension
For original spareparts please contact your local authorized dealer.
User manual
19
6 Disposal information
6.1 Appliance recyclability and disposal
6.1.1
Recyclability
Our appliances are manufactured using a significant percentage of recyclable metals (such as stainless steel, iron,
aluminium, galvanized sheet, copper, etc.), which can be recovered through the local recycling systems, in compliance with the regulations in force in the country of use.
National regulations regarding waste disposal may vary. Disposal of the appliance must therefore be carried out in
accordance with the applicable legislation and the directives issued by the competent authorities in the country where
the appliance is decommissioned.
The components of the appliance must be separated and disposed of in accordance with their material composition
(e.g. metals, oils, greases, plastics, rubber, refrigerant gases, insulating boards and other insulating material, glass
wool, LEDs, etc.) and in full compliance with applicable local and international waste management regulations.
Compressors may contain oils and refrigerants fluids - are special waste and has to be recycled on local bases
regulations.
6.1.2
Procedure regarding appliance disposal and component / material recovery
This product should not simply be disposed of in the environment at the end of its life cycle; it is imperative instead either to dispose of it in accordance with local environmental regulations, or, preferably, to deliver it whole to an authorized recycling center.
All removed components, including doors and other structural parts, must be delivered together with the appliance to
an authorized recycling or dismantling facility.
The dismantling/recycling center will apply state of the art technologies and methods available to them to effectively
disassemble the products for best recyclability.
Note that printed circuit boards, electrical motors or other components identified in European Union legislation to be
of high critical raw materials recovery potential need to be addressed specifically.
In case of doubts or questions, always refer to your reference customer care service.
Before disposing of the appliance, carefully inspect its physical condition and preservation state, checking for potential leaks of liquids or gases, as well as for broken parts that may pose hazards during handling and subsequent
dismantling.
The symbol on the product indicates that this product should not be treated as domestic
waste, but must be correctly disposed of in order to prevent any negative consequences for
the environment and human health. For further information on the recycling of this product,
contact the local dealer or agent, the customer care service or the local body responsible
for waste disposal.
Note!
When dismantling the appliance, any marking, this manual and other documents concerning the appliance
must be destroyed.
6.2 Disposal of packing
The packing must be disposed of in compliance with the current regulations in the country where the appliance is
used. All the packing materials are environmentally friendly.
They can be safely kept, recycled or burned in an appropriate waste incineration plant. Recyclable plastic parts are
marked as following examples.
Polyethylene:
PE
• Outer wrapping
• Instructions bag
Polypropylene:
• Straps
PP
Polystyrene foam:
• Corner protectors
PS
Electrolux Professional AB
341 80 Ljungby, Sweden
Share more of our thinking at www.wascomat.com
">