advertisement
CE labs can support many areas of your audio and video distribution needs.
We manufacture:
• Digital Signage software and Media Players
• HD Matrix Switchers
• RF amplifiers
• HDMI and Component HD distribution amplifiers
• CAT 5 Signal Extenders
• VGA Extenders and Splitters
• and cables of all types.
See our full product line at www.celabs.net
INSTRUCTION MANUAL
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from the purchase by the original purchaser. If this product is defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids, abuse, neglect, improper operation of unit, excess wear and tear and defects resulting from unauthorized disassembly and or modification.
3209 Wood Drive
Garland, TX 75041
Phone: (469) 429-9200
Toll free: (800) 767-6189
Fax: (469) 429-9205 www.celabs.net
Document: AV400_AV700_manual.pdf
930_5027_01_REV.B
AV400 & AV700
Audio/Video
Distribution Amplifiers
True one to one ratio
No signal loss
Daisy chain several units for larger displays wth great picture quality
Heavy duty metal housing provides excellent shielding
Allows up to 150 ft. run
GENERAL INFORMATION
Both models are low noise, low distortion unity gain distribution amplfiers for line level stereo audio and video baseband signals.
Both models distribute a true one to one signal ratio. There is no loss of signal from original source to any output.
The model AV400 distributes audio/video to four TVs without loss. The AV700 distributes audio/video to seven TVs.
A B C
A. 15 Volt DC input jack and power indicator. LED lights up when
power is applied.
B. Input Jacks: Connect to original source at corresponding output jacks.
Connections are color coded (red to red, yellow to yellow and white
to white).
C. Output Jacks: Connect to corresponding input jacks of TVs, VCRs, etc.
Connections are color coded.
SAFETY INSTRUCTIONS
Location: Avoid locations with strong vibrations, direct sunlight or intense heat. Avoid Electrical Shock: Do not handle power cord with wet hands; do not expose to rain or other moisture. If liquid is spilled on unit, unplug and have unit serviced at authorized service center. To reduce the risk of electrical shock, do not remove cover. No user serviceable parts inside.
KEY INFORMATION
The AV400 and 700 units can be looped, cascaded or put in tandem as shown below without loss of audio/video signals. Audio/Video cables need to be top quality and can have runs of up to 100 feet between units and 150 feet between units and TVs.
Common Audio/video Sources:
VCR, CD, Satellite receiver, etc.
Audio/Video Source
H GH ER ORMANCE
AUD O AND VIDEO
D S RIBU ION AM I IER ou Ou pu
T ue One To One Ra o
A
H GH ER ORMANCE
AUD O AND VIDEO
D S RIBU ION AM I IER ou Ou pu
T ue One To One Ra o
A
H GH ER ORMANCE
AUD O AND VIDEO
D S RIBU ION AM I IER ou Ou pu
T ue One To One Ra o
A T
M e 4
SPECIFICATIONS
VIDEO
Gain:
1 Volt, Unterminated 2 Volt
Input Impedance:
75 Ohms +5%
Video Response:
50 Hz to 10 MHz <0.4dB
Ch. to Ch. Isolation:
50 Hz to 10 Mhz 32 dB
Out to In Isolation:
50 Hz to 10 MHz 60 dB
Return Loss:
50 Hz to 10 MHz 20 dB
AUDIO
Gain:
Unity
Input Impedance:
22 K Ohm
Output Impedance:
100 Ohm
THD:
0.05% at 1.0 Volts input level
Frequency Response:
10 to 50 KHz + 1 dB
Channel Separation:
> 75 dB @ 1 KHz
Out to In Isolation:
60 dB
Signal to Noise:
100 dB (re: 2 Volts out)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement