Red Hat Developer Guide
Below you will find brief information for Red Hat Enterprise Linux 7 Developer Guide. This guide provides an overview of application development tools in Red Hat Enterprise Linux 7, including Eclipse, compilers, debuggers, and profiling tools.
PDF
Document
Advertisement
Advertisement
Red Hat Enterprise Linux 7 Developer Guide An introduction to application development tools in Red Hat Enterprise Linux 7 Red Hat Subject Matter ExpertsDave Brolley William Cohen Roland Grunberg Karsten Hopp Jakub Jelinek Benjamin Kosnik Chris Moller Alex Kurtakov Charley Wang Kent Sebastian Aldy Hernandez Jeff Johnston Phil Muldoon Development Community Red Hat Enterprise Linux 7 Developer Guide An introduction to application development tools in Red Hat Enterprise Linux 7 Dave Bro lley Red Hat Engineering To o ls Develo pment bro [email protected] m Pro filing William Co hen Red Hat Engineering To o ls Develo pment wco [email protected] m Pro filing Ro land Grunberg Red Hat Engineering To o ls Develo pment [email protected] m Eclipse and Eclipse plug-ins Aldy Hernandez Red Hat Engineering To o ls Develo pment [email protected] m Co mpiling and Building Karsten Ho pp Base Operating System Co re Services - BRNO [email protected] m Co mpiling Jakub Jelinek Red Hat Engineering To o ls Develo pment [email protected] m Pro filing Jeff Jo hnsto n Red Hat Engineering To o ls Develo pment jjo [email protected] m Eclipse and Eclipse plug-ins Benjamin Ko snik Red Hat Engineering To o ls Develo pment bko [email protected] m Libraries and Runtime Suppo rt Chris Mo ller Red Hat Engineering To o ls Develo pment cmo [email protected] m Debugging Phil Muldo o n Red Hat Engineering To o ls Develo pment pmuldo o [email protected] m Debugging Alex Kurtako v Red Hat Engineering To o ls Develo pment akurtako @redhat.co m Eclipse and Eclipse plug-ins Charley Notice Wang Legal Red Hat Engineering To o ls Develo pment [email protected] m Red Hat, Inc. and others. Copyright © 2012 Eclipse and Eclipse plug-ins T his document is licensed by Red Hat under the Creative Commons Attribution-ShareAlike 3.0 Unported Kent Sebastian License. If you distributemthis document, or a modified version of it, you must provide attribution to Red [email protected] Hat,filing Inc. and provide a link to the original. If the document is modified, all Red Hat trademarks must be Pro removed. Red Hat Subject Matter Experts Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section Develo pment Co mmunity 4d of CC-BY-SA to the fullest extent permitted by applicable law. Edited by Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, MetaMatrix, Fedora, the Infinity Logo, Jacquelynn and RHCEEast are trademarks of Red Hat, Inc., registered in the United States and other countries. Engineering Co ntent Services [email protected] Linux ® is the m registered trademark of Linus T orvalds in the United States and other countries. Do n Do mingo Java ® Engineering is a registered trademark Red Hat Co ntent Services of Oracle and/or its affiliates. ddo mingo @redhat.co m XFS ® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries. MySQL ® is a registered trademark of MySQL AB in the United States, the European Union and other countries. Node.js ® is an official trademark of Joyent. Red Hat Software Collections is not formally related to or endorsed by the official Joyent Node.js open source or commercial project. T he OpenStack ® Word Mark and OpenStack Logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community. All other trademarks are the property of their respective owners. Abstract T his document describes the different features and utilities that make Red Hat Enterprise Linux 7 an ideal enterprise platform for application development. It focuses on Eclipse as an end-to-end integrated development environment (IDE), but also includes command line tools and other utilities outside Eclipse. T able of Contents Table of Contents . .hapter C . . . . . . 1. . . Eclipse . . . . . . . Development . . . . . . . . . . . . .Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. . . . . . . . . 1.1. Starting an Eclipse project 3 1.2. Eclipse User Interface 6 1.3. Editing C/C++ Source Code in Eclipse 15 1.4. Editing Java Source Code in Eclipse 18 1.5. Eclipse RPM Building 19 1.6. Eclipse Documentation 20 . .hapter C . . . . . . 2. . . Collaborating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 .......... 2.1. Concurrent Versions System (CVS) 23 2.2. Apache Subversion (SVN) 25 2.3. Git 30 . .hapter C . . . . . . 3. . . Libraries . . . . . . . . .and . . . .Runtime . . . . . . . .Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4. 2. . . . . . . . . 3.1. Version Information 42 3.2. Compatibility 43 3.3. Library and Runtime Details 43 . .hapter C . . . . . . 4. . . Compiling . . . . . . . . . and . . . . Building . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 .......... 4 .1. GNU Compiler Collection (GCC) 71 4 .2. Distributed Compiling 94 4 .3. Autotools 95 4 .4. Eclipse Built-in Specfile Editor 96 4 .5. CDT in Eclipse 97 4 .6. build-id Unique Identification of Binaries 98 4 .7. Software Collections and scl-utils 98 . .hapter C . . . . . . 5. . . Debugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 ........... 5.1. ELF Executable Binaries 100 5.2. Installing Debuginfo Packages 101 5.3. GDB 104 5.4. Variable T racking at Assignments 115 5.5. Python Pretty-Printers 116 5.6. Debugging C/C++ Applications with Eclipse 118 . .hapter C . . . . . . 6. . . Profiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 ........... 6.1. Valgrind 120 6.2. OProfile 123 6.3. SystemT ap 126 6.4. Performance Counters for Linux (PCL) T ools and perf 130 6.5. ftrace 133 . .hapter C . . . . . . 7. . . Red . . . . Hat . . . . Developer . . . . . . . . . .T. oolset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 ........... 7.1. Red Hat Developer T oolset Features 135 7.2. Changes in binutils 136 7.3. Platform Compatibility 141 7.4. Red Hat Developer T oolset References 141 . .hapter C . . . . . . 8. . . Red . . . . Hat . . . . Software . . . . . . . . .Collections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 . . 2. . . . . . . . . 8.1. Red Hat Software Collections Features 142 8.2. Platform Compatibility 143 8.3. Red Hat Software Collections Use 143 8.4. Deploy Applications T hat Use Red Hat Software Collections 144 8.5. Where to Find More Information? 144 . .hapter C . . . . . . 9. . . .Documentation . . . . . . . . . . . . . . T. ools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 . . 5. . . . . . . . . 9.1. Publican 145 1 Red Hat Enterprise Linux 7 Developer Guide 9.1. Publican 9.2. Doxygen 145 150 .Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 ........... A.1. mallopt 158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 malloc_trim ........... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 malloc_stats ........... . . . . . . . .Information Further . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 ........... . . . . . . . . .History Revision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 ........... I.ndex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161 ........... 2 C hapter 1. Eclipse Development Environment Chapter 1. Eclipse Development Environment Eclipse is a powerful development environment that provides tools for each phase of the development process. It is integrated into a single, fully configurable user interface for ease of use, featuring a pluggable architecture which allows for extension in a variety of ways. Eclipse integrates a variety of disparate tools into a unified environment to create a rich development experience. T he Valgrind plug-in, for example, allows programmers to perform memory profiling (normally done through the command line) through the Eclipse user interface. T his functionality is not exclusive only to Eclipse. Being a graphical application, Eclipse is a welcome alternative to developers who find the command line interface intimidating or difficult. In addition, Eclipse's built-in Help system provides extensive documentation for each integrated feature and tool. T his greatly decreases the initial time investment required for new developers to become fluent in its use. T he traditional (that is, mostly command line based) Linux tools suite (gcc, gdb, etc) and Eclipse offer two distinct approaches to programming. Most traditional Linux tools are far more flexible, subtle, and (in aggregate) more powerful than their Eclipse-based counterparts. T hese traditional Linux tools, on the other hand, are more difficult to master, and offer more capabilities than are required by most programmers or projects. Eclipse, by contrast, sacrifices some of these benefits in favor of an integrated environment, which in turn is suitable for users who prefer their tools accessible in a single, graphical interface. 1.1. Starting an Eclipse project Install eclipse with the following command: # yum install eclipse Once installed, Eclipse can be started either by manually executing /usr/bin/eclipse or by using the system menu created. Eclipse stores all project and user files in a designated workspace. You can have multiple workspaces and can switch between each one on the fly. However, Eclipse will only be able to load projects from the current active workspace. T o switch between active workspaces, navigate to File > Switch Workspace > /path/to/workspace. You can also add a new workspace through the Workspace Launcher wizard; to open this wizard, navigate to File > Switch Workspace > Other. 3 Red Hat Enterprise Linux 7 Developer Guide Figure 1.1. Workspace Launcher For information about configuring workspaces, refer to Reference > Preferences > Workspace in the Workbench User Guide (Help Contents). A project can be imported directly into Eclipse if it contains the necessary Eclipse metafiles. Eclipse uses these files to determine what kind of perspectives, tools, and other user interface configurations to implement. As such, when attempting to import a project that has never been used on Eclipse, it may be necessary to do so through the New Project wizard instead of the Import wizard. Doing so will create the necessary Eclipse metafiles for the project, which you can also include when you commit the project. 4 C hapter 1. Eclipse Development Environment Figure 1.2. New Project Wizard T he Import wizard is suitable mostly for projects that were created or previously edited in Eclipse, that is, projects that contain the necessary Eclipse metafiles. 5 Red Hat Enterprise Linux 7 Developer Guide Figure 1.3. Import Wizard 1.2. Eclipse User Interface T he entire user interface in Figure 1.4, “Eclipse User Interface (default)” is referred to as the Eclipse workbench. It is generally composed of a code Editor, Project Explorer window, and several views. All elements in the Eclipse workbench are configurable, and fully documented in the Workbench User Guide (Help Contents). Refer to Section 1.2.3, “Customize Perspective” for a brief overview on customizing the user interface. Eclipse features different perspectives. A perspective is a set of views and editors most useful to a specific type of task or project; the Eclipse workbench can contain one or more perspectives. Figure 1.4, “Eclipse User Interface (default)” features the default perspective for C/C++. Eclipse also divides many functions into several classes, housed inside distinct menu items. For example, the Project menu houses functions relating to compiling/building a project. T he Window menu contains options for creating and customizing perspectives, menu items, and other user interface elements. For a brief overview of each main menu item, refer to Reference> → C/C++ Menubar in the C/C++ Development User Guide or Reference → Menus and Actions in the Java Development User Guide. T hese are found in the Eclipse help. T he following sections provide a high-level overview of the different elements visible in the default user interface of the Eclipse integrated development environment (IDE). T he Eclipse workbench provides a user interface for many features and tools essential for every phase of the development process. T his section provides an overview of Eclipse's primary user interface. 6 C hapter 1. Eclipse Development Environment Figure 1.4 . Eclipse User Interface (default) Figure 1.4, “Eclipse User Interface (default)” displays the default workbench for C/C++ projects. T o switch between available perspectives in a workbench, press Ctrl+F8. For some hints on perspective customization, refer to Section 1.2.3, “Customize Perspective”. T he figures that follow describe each basic element visible in the default C/C++ perspective. Figure 1.5. Eclipse Editor 7 Red Hat Enterprise Linux 7 Developer Guide T he Editor is used to write and edit source files. Eclipse can auto-detect and load an appropriate language editor (for example, C Editor for files ending in .c) for most types of source files. T o configure the settings for the Editor, navigate to Window > Preferences > language (for example, Java, C++) > Code Style. Figure 1.6. Project Explorer T he Project Explorer View provides a hierarchical view of all project resources (binaries, source files, etc.). You can open, delete, or otherwise edit any files from this view. T he View Menu button in the Project Explorer View allows you to configure whether projects or working sets are the top-level items in the Project Explorer View. A working set is a group of projects arbitrarily classified as a single set; working sets are handy in organizing related or linked projects. Figure 1.7. Outline Window T he Outline window provides a condensed view of the code in a source file. It details different variables, functions, libraries, and other structural elements from the selected file in the Editor, all of which are editor-specific. 8 C hapter 1. Eclipse Development Environment Figure 1.8. Console View Some functions and plugged-in programs in Eclipse send their output to the Console view. T his view's Display Selected Console button allows you to switch between different consoles. Figure 1.9. T asks View T he T asks view allows you to track specially-marked reminder comments in the code. T his view shows the location of each task comment and allows you to sort them in several ways. Figure 1.10. Sample of T racked Comment 9 Red Hat Enterprise Linux 7 Developer Guide Most Eclipse editors track comments marked with //FIXME or //T ODO tags. T racked comments—that is, task tags—are different for source files written in other languages. T o add or configure task tags, navigate to Window > Preferences and use the keyword task tags to display the task tag configuration menus for specific editors/languages. Figure 1.11. T ask Properties Alternatively, you can also use Edit > Add T ask to open the task Properties menu (Figure 1.11, “T ask Properties”). T his will allow you to add a task to a specific location in a source file without using a task tag. Figure 1.12. Problems View T he Problems view displays any errors or warnings that occurred during the execution of specific actions such as builds, cleans, or profile runs. T o display a suggested "quick fix" to a specific problem, select it and press Ctrl+1. 1.2.1. The Quick Access Menu 10 C hapter 1. Eclipse Development Environment One of the most useful Eclipse tips is to use the quick access menu. T yping a word in the quick access menu will present a list of Views, Commands, Help files and other actions related to that word. T o open this menu, press Ctrl+3. Figure 1.13. Quick Access Menu In Figure 1.13, “Quick Access Menu”, clicking Views > Project Explorer will select the Project Explorer window. Click any item from the Commands, Menus, New, or Preferences categories to run the selected item. T his is similar to navigating to or clicking the respective menu options or taskbar icons. You can also navigate through the quick access menu using the arrow keys. 1.2.2. Keyboard Shortcuts It is also possible to view a complete list of all keyboard shortcut commands; to do so, press Shift+Ctrl+L. 11 Red Hat Enterprise Linux 7 Developer Guide Figure 1.14 . Keyboard Shortcuts T o configure Eclipse keyboard shortcuts, press Shift+Ctrl+L again while the Keyboard Shortcuts list is open. Figure 1.15. Configuring Keyboard Shortcuts 1.2.3. Customize Perspective T o customize the current perspective, navigate to Window > Customize Perspective. T his opens the Customize Perspective menu, allowing the visible tool bars, main menu items, command groups, and shortcuts to be configured. T he location of each view within the workbench can be customized by clicking on a view's title and dragging it to a desired location. 12 C hapter 1. Eclipse Development Environment Figure 1.16. Customize Perspective Menu Figure 1.16, “Customize Perspective Menu” displays the T ool Bar Visibility tab. As the name suggests, this tab allows you to toggle the visibility of the tool bars (Figure 1.17, “T oolbar”). Figure 1.17. T oolbar T he following figures display the other tabs in the Customize Perspective Menu: 13 Red Hat Enterprise Linux 7 Developer Guide Figure 1.18. Menu Visibility T ab T he Menu Visibility tab configures what functions are visible in each main menu item. For a brief overview of each main menu item, refer to Reference > C/C++ Menubar in the C/C++ Development User Guide or Reference > Menus and Actions in the Java Development User Guide. Figure 1.19. Command Group Availability T ab 14 C hapter 1. Eclipse Development Environment Command groups add functions or options to the main menu or tool bar area. Use the Command Group Availability tab to add or remove a Command group. T he Menubar details and T oolbar details fields display the functions or options added by the Command group to either Main Menu or T oolbar Area, respectively. Figure 1.20. Shortcuts T ab T he Shortcuts tab configures what menu items are available under the following submenus: File > New Window > Open Perspective Window > Show View 1.3. Editing C/C++ Source Code in Eclipse Red Hat Enterprise Linux 6 provides Eclipse plug-ins for C/C++ development with the CDT . Specialized editors for C/C++ source code, makefiles, and GNU Autotools files are included. Functionality is also available for running and debugging programs. T he Eclipse text editor supports most of the features expected in a text editor, such as cut, copy, paste, and block selection (Ctrl+Shift+A). It also has some relatively unique features, such as the ability to move a selection (Alt+Up/Down Arrow). 15 Red Hat Enterprise Linux 7 Developer Guide Of particular interest to C/C++ programmers is the Content Assist feature. T his feature presents a pop-up window with possible functions, variables, and templates for the current file/location. It is invoked by pressing Ctrl+Space while the cursor is at the desired location. See Section 1.3.1, “libhover Plug-in” for more information on completion of function calls from libraries. T he Eclipse C/C++ code editor also has error highlighting and refactoring. Code errors and warnings are annotated with colored wavy underlines. T hese errors and warnings may be present as code is entered into the editor, or they may be present only after a build has occurred and the compiler output has been transformed into these markers. T he provided refactoring tools include the ability to rename code elements. T his change can then be reflected in both uses and declarations of the function. See Section 5.6, “Debugging C/C++ Applications with Eclipse”, or Section 4.3.1, “Autotools Plug-in for Eclipse” for more information, or refer to Concepts → Coding aids, Concepts → Editing C/C++ Files, and T asks → Write code in the C/C++ Development User Guide, found in the Help Contents. 1.3.1. libhover Plug-in T he libhover plug-in for Eclipse provides plug-and-play hover help support for the GNU C Library and GNU C++ Standard Library. T his allows developers to refer to existing documentation on glibc and libstdc++ libraries within the Eclipse IDE in a more seamless and convenient manner via hover help and code completion. C++ Language Documentation for method completion is not supported for C++; only the prototypes from header files are supplied. In addition, the ability to add header files to the source file is not supported for C++ methods. For C++ library resources, libhover has to index the file using the CDT indexer. Indexing parses the given file in context of a build; the build context determines where header files come from and how types, macros, and similar items are resolved. T o be able to index a C++ source file, libhover usually requires an actual build to be performed first, although in some cases it may already know where the header files are located. A C++ member function name is not enough information to look up its documentation so the libhover plug-in may require indexing for C++ sources. C++ allows different classes to have members of the same name, and even within a class, members may have the same name but with different method signatures. T his requires the class name and parameter signature of the function to be provided to determine exactly which member is being referenced. In addition, C++ also has type definitions and templated classes. Such information requires parsing an entire file and its associated include files; libhover can only do this via indexing. C Language For C functions, performing a completion (Ctrl+Space) will provide the list of C functions added to the potential sources (for example, typing prin and then hitting Ctrl+Space will list printf as one of the possible completions) and the documentation is viewed in an additional window, for determining exactly what C function is required. 16 C hapter 1. Eclipse Development Environment Figure 1.21. Using Code Completion C functions can be referenced in their documentation by name alone. As such, libhover does not have to index C source files in order to provide hover help or code completion. T he appropriate header file include statement for a C library function can be automatically added if it is not already present. Select the C function in the file and use right-click > Source > Add Include to automatically add the required header files to the source. T his can also be done using Shift+Ctrl+N. 1.3.1.1. Setup and Usage Hover help for all installed libhover libraries is enabled by default, and it can be disabled per project. T o disable or enable hover help for a particular project, right-click the project name and click Properties. On the menu that appears, navigate to C/C++ General > Documentation. Check or uncheck a library in the Help books section to enable or disable hover help for that particular library. Figure 1.22. Enabling/Disabling Hover Help 17 Red Hat Enterprise Linux 7 Developer Guide Disabling hover help from a particular library may be preferable, particularly if multiple libhover libraries overlap in functionality. For example, if a libhover plug-in for a C library were manually installed, such as the newlib C library (note that newlib C library plug-in is not provided in Red Hat Enterprise Linux 6). T he hover help would contain C functions whos names overlap with those in the GNU C library (provided by default). A user would not want both of these hover helps active at once, so disabling one would be practical. When multiple libhover libraries are enabled and there exists a functional overlap between libraries, the Help content for the function from the first listed library in the Help books section will appear in hover help (that is, in Figure 1.22, “Enabling/Disabling Hover Help”, glibc). For code completion, libhover will offer all possible alternatives from all enabled libhover libraries. T o use hover help, hover the mouse over a function name or member function name in the C/C++ Editor. After a short time, no more than a few seconds, libhover will display library documentation on the selected C function or C++ member function. Figure 1.23. Using Hover Help 1.4. Editing Java Source Code in Eclipse Red Hat Enterprise Linux 6 provides Eclipse plug-ins for Java (Java SE) development with the JDT . Specialized editors for Java source code as well as for ant build.xm l files are included. Functionality is also available for running and debugging programs. Eclipse provides a fully-featured interactive development environment for Java developers. New Project Wizard Eclipse's New Project Wizard performs most of the boilerplate setup required to start a Java project. T his allows the user to select and customize various options, such as which Java Runtime Environment to use, or the preferred project file tree layout. 18 C hapter 1. Eclipse Development Environment Follow the same procedure to export an existing project, and when prompted for a location, enter the existing project's location instead. For more information regarding setting up a new Java project, refer to Help > Help Contents > Java Development > Getting Started > Basic T utorial > Creating Your First Java Project. Content Assistance T he Eclipse Java Development Environment (JDT ) increases productivity and reduces errors by providing a rich set of content assistance features, usually invoked by pressing Ctrl + Space. T his includes completion for method names in your code or in libraries, inserting parameter names in Javadoc, and filling in parameters when calling a method. T his is fully customizable, allowing the options of suppressing certain suggestions or adding custom code templates to be filled in while writing code. For an overview of these features, refer to Help > Help Contents > Java Development User Guide > T ips and T ricks. Code Formatting Code formatting, accessed by pressing Ctrl + Shift + F, is another useful feature present in the JDT . T he formatting settings can be changed by navigating to Window > Preferences > Java > Code Styler > Formatter where there is the option of using a set of installed formatting profiles, or creating a new one to fit the style of the project. Debugging Features T he JDT also comes with several debugging features. Create breakpoints by double-clicking on the left hand margin at the desired line of code. When the debugger is run, the program will stop at that line of code which is useful in detecting the location of errors. T he Debug Perspective, configured the first time the debugger is run, is a different layout that makes views related to debugging more prominent. For example, the Expressions view allows evaluation of Java expressions in the context of the current frame. T he views that make up the Debug Perspective, like all views, are accessed through Window > Show View and you do not have to be debugging to access these views. While debugging, hover over variables to view their values or use the Variables view. Using the Debug view, it is possible to control the execution of programs and explore the various frames on the stack. For more information on debugging in the JDT , refer to Help > Help Contents > Java Development > Getting Started > Basic T utorial > Debugging Your Programs. JDT Features T he JDT is highly customizable and comes with an extensive feature list which can be viewed through the settings in Window > Preferences > Java, and through the Java settings in Project > Properties. For detailed documentation of the JDT and its features, refer to the Java Development User Guide found in Help > Help Contents > Java Development User Guide. 1.5. Eclipse RPM Building T he Specfile Editor Plug-in for Eclipse provides useful features to help developers manage .spec files. T his plug-in allows users to leverage several Eclipse GUI features in editing .spec files, such as autocompletion, highlighting, file hyperlinks, and folding. In addition, the Specfile Editor Plug-in also integrates the rpm lint tool into the Eclipse interface. rpm lint is a command line tool that helps developers detect common RPM package errors. T he richer 19 Red Hat Enterprise Linux 7 Developer Guide visualization offered by the Eclipse interface helps developers quickly detect, view, and correct mistakes reported by rpm lint. T he Eclipse .spec file editor plug-in also supports building RPM files from RPM projects. T his feature can be used by employing an export wizard (Import → RPM → Source/Binary RPM) allowing the selection of whether a source RPM (src.rpm ), binary RPM, or both, are required. Build output is in the Eclipse Console view. For a limited number of build failures, there is hyperlinking support. T hat is, certain parts of the build failure are changed to be a hyperlink (Ctrl+Click) in the Eclipse Console view, which then points the user to the actual line in the .spec file that is causing the problem. Also of note is the wizard for importing source RPM (.src.rpm ) files, found in Import → RPM → Source RPM). T his allows the user to easily start with no configuration required, in case a source RPM has already been created. T his project is then ready for editing the spec file and building (exporting) to source/binary RPMs. For further details, refer to the Specfile Editor User Guide → Import src.rpm and export rpm and src.rpm section in the Specfile Editor User Guide in Help Contents. 1.6. Eclipse Documentation Eclipse features a comprehensive internal help library that covers nearly every facet of the Integrated Development Environment (IDE). Every Eclipse documentation plug-in installs its content to this library, where it is indexed. T o access this library, use the Help menu. Figure 1.24 . Help T o open the main Help menu, navigate to Help > Help Contents. T he Help menu displays all the available content provided by installed documentation plug-ins in the Contents field. 20 C hapter 1. Eclipse Development Environment Figure 1.25. Help Menu T he tabs at the bottom of the Contents field provides different options for accessing Eclipse documentation. You can navigate through each "book" by section/header or by searching via the Search field. You can also bookmark sections in each book and access them through the Bookmarks tab. T he Workbench User Guide documents all facets of the Eclipse user interface extensively. It contains very low-level information on the Eclipse workbench, perspectives, and different concepts useful in understanding how Eclipse works. T he Workbench User Guide is an ideal resource for users with little to intermediate experience with Eclipse or IDEs in general. T his documentation plug-in is installed by default. T he Eclipse help system also includes a dynamic help feature. T his feature opens a new window in the workbench that displays documentation relating to a selected interface element. T o activate dynamic help, navigate to Help > Dynamic Help. 21 Red Hat Enterprise Linux 7 Developer Guide Figure 1.26. Dynamic Help T he rightmost window in Figure 1.26, “Dynamic Help” displays help topics related to the Outline view, which is the selected user interface element. 22 C hapter 2. Collaborating Chapter 2. Collaborating Effective revision control is essential to all multi-developer projects. It allows all developers in a team to create, review, revise, and document code in a systematic and orderly manner. Red Hat Enterprise Linux 6 supports three of the most popular open source revision control systems: CVS, SVN, and Git. T he tools for these revision control systems provide access to a wide range of publicly available open source code, as well as the capability to set up individual internal code repositories. T he following section provides a brief overview and references to relevant documentation for each tool. 2.1. Concurrent Versions System (CVS) Concurrent Versions System (CVS) is a centralized version control system based on RCS format with a client-server architecture. It was the first version control system and the predecessor for Subversion (SVN). 2.1.1. CVS Overview T his section discusses the various elements of CVS, both the good and the bad. CVS was developed when network connectivity was unreliable and would often drop out. T his meant that if several files were committed at once and the network dropped out, the commit would fail. T his can still occur now if a network is unreliable but is less common with modern networking infrastructure. If it happens, the CVS administrator has two options to resolve the problem. T he first is to use the adm in command to remove stall locked files and back out the changed files. T he second option is to reissue the commit command. CVS uses one central location for making back-ups, which is useful for an unstable network. It allows the enforcement of a commit policy through manually prepared triggers (automated tests, builds, Access Control Lists (ACLs), integration with a bug tracking system) due to centralized architecture. T o create more detailed commits to the backup, CVS can also expand keywords that are marked by the atsign (@) to record commit details (committer name, commit message, commit time, for example) into a committed file. In order to keep track of these commits, CVS uses a server to track the changes for each file separately and in reverse time order. By doing so, the latest version is stored directly and can be retrieved quickly, where older versions must be recomputed by the server. Each changed, committed file is tracked separately with an independent revision identifier. T his can make it difficult to discover which files have been changed by the commit when multiple changed files are committed. T o counter this, users should tag the repository state to refer back and view the changes when required. T he CVS repository can be accessed by two methods. If the repository is on the same machine as the client (:local: access method) then the client spawns the server on its behalf. If the repository is on a remote machine, the server can be started with rsh/SSH (CVS_RHS environment variable) by a client or by an inet daemon (/etc/xinetd.d/cvs) and different authentication methods (:gserver: access method integrates Kerberos authentication, for example) can be used. Finally, for security a client-server approach is used with CVS. T his means that the client is dependent on connectivity to the server and cannot perform any operation (committing, or reading the commit log) without permission to access the server. 2.1.2. Typical Scenario 23 Red Hat Enterprise Linux 7 Developer Guide T his is a sequence of commands demonstrating CVS repository creation in the $CVSROOT directory (using an absolute path to signal :local: access method), importing sources from $SOURCES, checking them out from the repository into $WORKDIR, modifying some files, and committing the changes. Procedure 2.1. Using CVS 1. Initialize CVS storage. $ mkdir "$CVSROOT" $ cvs -d "$CVSROOT" init T his creates the CVSROOT subdirectory under $CVSROOT with repositories configuration. 2. Import code from $SOURCES directory into CVS as $REPOSIT ORY, tagged with $VENDOR_T AG and $RELEASE_T AG with a commit $MESSAGE. $ cd "$SOURCES" $ cvs -d "$CVSROOT" import -m "$MESSAGE" "$REPOSITORY" \ "$VENDOR_TAG" "$RELEASE_TAG" T he $SOURCES content should be imported into CVS under $CVSROOT /$REPOSIT ORY. It is possible to have more repositories in one CVS storage, though this example just uses the one. T he $VENDOR_T AG and $RELEASE_T AG are tags for implicit repository branches. 3. Different developers can now check the code out into $WORKDIR. $ cd "$WORKDIR" $ cvs -d "$CVSROOT" checkout "$REPOSITORY" Warning Do not check out into the original $SOURCES. T his could cause data corruption on the client side and CVS will print errors on various CVS invocations. 4. T he latest version of the CVS repository has been transferred into the $REPOSIT ORY subdirectory. T he developer can also check out multiple repositories from one server. $ cd $REPOSITORY 5. T o schedule adding a new $FILE use: $ vi "$FILE" $ cvs add "$FILE" 6. T he developer can modify an $EXIST ING_FILE. $ vi "$EXISTING_FILE" 7. Finally, the developer can commit these changes with a $COMMIT _MESSAGE. $ cvs commit -m "$COMMIT_MESSAGE" 24 C hapter 2. Collaborating It is possible to export the $CVSROOT value as a CVSROOT environment variable and the cvs tool will respect it. T his can free the developer from repetitively supplying the -d "$CVSROOT " option. T he value is stored in the CVS helper subdirectory at initial check-out, and the CVS tool takes the value from there automatically. 2.1.3. CVS Documentation T he CVS manual page can be accessed with m an cvs. T here is also a local FAQ page located in /usr/share/doc/cvs-version/FAQ. CVS information pages are available at http://ximbiot.com/cvs/manual/. T he CVS home page is located at http://www.nongnu.org/cvs/. 2.2. Apache Subversion (SVN) Subversion is a version control system that manages files and directories, the changes made to them, and can recover and examine them in case of a fault. It was created to match CVS's features and preserve the same development model, and to address any problems often encountered with CVS. T his allowed CVS users to convert to SVN with minimal effort. T his section will cover the installation of SVN and provide details on the everyday uses of SVN. 2.2.1. Installation SVN can be installed with a binary package, directly from source code, or from the console. T he easiest way to install SVN would be through the console with the command yum install subversion. Selecting this option ensures that only Red Hat certified packages are used and removes the requirement to manually update them. Finally, SVN can be installed from source code, though this can be quite complex. From the SVN website, download the latest released source code and follow the instructions in the install file. 2.2.2. SVN Repository In order to begin using SVN, first create a new repository. SVN has no way to determine the difference between projects; it is up to the user to administer the file tree and place the project in separate directories as they prefer. Use the following commands to create the repository: # mkdir /var/svn # svnadmin create /var/svn/repos # ls /var/svn/repos/ conf db format hooks locks README.txt T his command will create the new directory /var/svn/repos with the required database files. T he SVN repository is accessed with a URL. Usually these use the standard syntax of http:// but it is not limited by this. It also accepts the following URL forms: file:/// Direct repository access (on local disk) 25 Red Hat Enterprise Linux 7 Developer Guide http:// Access with WebDAV protocol to Subversion-aware Apache server https:// Same as http:// but with SSL encryption svn:// Access via custom protocol to an svnserver server svn+ssh:// Same as svn:// but through an SSH tunnel. Important If the URL contains spaces place quotation marks around it to ensure the shell treats it as a single argument. Otherwise the URL will be invalid. 2.2.3. Importing Data Assuming that a project consisting of multiple files has already been created, organize them so that they are all in one directory. It is recommended that you use three top-level directories named branches, tags, and trunk. T his is not required by SVN but it is a popular convention. T he trunk directory should contain the projects files, and the branches and tags directories should remain empty. For example: myproject/branches/ myproject/tags/ myproject/trunk foo.c bar.c Makefile Once the information has been organized appropriately it is time to import it into the SVN repository. T his is done with the svn im port command. For example: $ svn import /path/to/mytree \ http://host.example.com/svn/repo/myproject -m "Initial import" Adding myproject/foo.c Adding myproject/bar.c Adding myproject/subdir Adding myproject/subdir/quux.h \ Committed revision 1. $ SVN creates the required directories based on how the file tree is set up. It can now be viewed at the URL created, or by the command: $ svn list http://host.example.com/svn/repo/myproject 2.2.4. Working Copies 26 C hapter 2. Collaborating Now that the first revision of the project has been checked into the repository, it can be edited and worked on. T o do this, create a working copy. T his is done with the svn checkout command. For example: $ svn checkout http://host.example.com/svn/repo/trunk A trunk/README A trunk/INSTALL A trunk/src/main.c A trunk/src/header.h ... Checked out revision 8810. $ A directory with a working copy of the project is now created on the local machine. It is also possible to specify where the local directory a project is checked out to with the following command: $ svn checkout http://host.example.com/svn/repo/trunk my-working-copy If the local directory specified does not exist, SVN will create it. Warning Every directory in the working copy contains a subdirectory called .svn. Being an administrative directory, it will not usually appear with a list command. T his is an important file and should not be deleted or changed. Subversion uses this directory to manage the working copy and tampering with it will cause errors and instability. If the directory is accidentally deleted the best way to fix it is to delete the entire containing directory (a normal system delete, not svn delete) and run svn update from a parent directory. T he deleted directory will be recreated, including the missing or changed .svn directory. T his can cause a loss of data. Although the working copy is now ready to edit, keep in mind that whenever the file tree changes, these changes must be sent to the repository as well. T his is done with a variety of commands. svn add filename Newly created files or directories, including the files they contain, are flagged to be added to the repository. T he next commit will add them to the repository where they can be accessed and viewed by all. svn delete filename Files or directories, including the files they contain, are flagged to be deleted from the repository. T he next commit will remove them. However, the deleted files can still be accessed in previous revisions through SVN. svn copy filename1 filename2 Creates a new file, filename2, which is an exact copy of filename1. It then schedules filename2 for addition on the next commit. Note that svn copy does not create intermediate directories unless the --parents option is passed. svn m ove filename1 filename2 T his is the same as svn copy filename1 filename2 followed by svn delete filename1. A copy is made, and then filename1 is scheduled to be deleted on the next commit. Note that svn m ove does not create intermediate directories unless the --parents option is passed. 27 Red Hat Enterprise Linux 7 Developer Guide svn m kdir directory T his command both creates the specified directory and then schedules it to be added to the repository on the next commit. Sometimes it is impractical to check out an entire working copy in order to do some simple changes. In these circumstances it is possible to perform svn m kdir, svn copy, svn m ove, and svn delete directly on the repository URL. Important Be careful when using these commands as there is no way to check the results with a working copy first. 2.2.5. Committing Changes Once the edits are complete and have been verified to work correctly, it is time to publish them so others can view the changes. For each file in the working copy, SVN records two pieces of information: T he file's working revision that the current working file is based on. A timestamp recording when the local copy was last updated by the repository. Using this information, SVN sorts the working copy on the local system into four categories: Unchanged; current T he file in the working directory is unchanged and matches the copy in the repository, meaning no changes have been committed since the initial check out. Both svn com m it and svn update will do nothing. Locally changed; current T he file in the working directory has been edited but has not yet been committed to the repository, and the repository version has not been changed since the initial checkout. Running svn com m it will update the repository with the changes in the working directory; running svn update will do nothing. Unchanged; out of date T he file in the working directory has not been edited, but the version in the repository has, meaning that the working copy is now out of date. Running svn com m it will do nothing; running svn update will merge the changes in the repository with the local working copy. Locally changed; out of date T he file in both the working directory and the repository has been changed. If svn com m it is run first, an 'out-of-date' error will occur. Update the file first. Running svn update will attempt to merge the changes in the repository with those on the working copy. If there are conflicts SVN will provide options for the user to decide on the best course of action to resolve them. Running svn status will display all of the files in the working tree that do not match the current version in the repository, coded by a letter. 28 C hapter 2. Collaborating ? item T he file is not recognized by SVN; that is it is in the working copy, but has not yet been added to the repository, or been scheduled for any action. A item T he file is scheduled for addition to the repository and will be added on the next commit. C item T he file is in conflict with a change made on the repository. T his means that someone has edited and committed a change to the same section of the file currently changed in the working copy, and SVN does not know which is 'correct'. T his conflict must be resolved before the changes are committed. D item T he file is scheduled for deletion on the next commit. M item T he file has been modified and the changes will be updated on the next commit. If the --verbose (-v) is passed with svn status, the status of every item in the working copy will be displayed, even those that have not been changed. For example: $ svn status -v M 44 23 sally README 44 30 sally INSTALL M 44 20 harry bar.c 44 18 ira stuff 44 35 harry stuff/trout.c D 44 19 ira stuff/fish.c 44 21 sally stuff/things A 0 ? ? stuff/things/bloo.h 44 36 harry stuff/things/gloo.c Along with the letter codes, this shows the working revision, the revision in which the item was last changed, who changed it, and the item changed respectively. It can also be useful to see which items have been modified in the repository since the last time a checkout was performed. T his is done by passing the --show-updates (-u) with svn status. An asterisk (*) will be displayed between the letter status and the working revision number on any files that will be updated when performing an svn com m it. Another way to view changes made is with the svn diff command. T his displays changes in a unified diff format, describing changes as 'snippets' of a file's content where each line is prefixed with a character: a space for no change, a minus sign (-) for a line removed, and a plus sign (+) for an added line. Occasionally a conflict will occur. SVN provides the three most common responses (postpone, diff-full, and edit) and a fourth option to list all the options and what they each do. T he options available are: (p) postpone Mark the conflict to be resolved later. (df) diff-full Display the differences between the base revision and the conflicted file in unified diff format. 29 Red Hat Enterprise Linux 7 Developer Guide (e) edit Change merged file in an editor. (r) resolved Accept the merged version of the file. (mf) mine-full Accept my version of the entire file, ignoring the most recent changes in the repository. (tf) theirs-full Accept their version of the entire file, ignoring the most recent changes in the local working copy. (l) launch Launch an external tool to resolve conflict (this requires set up of the chosen external tool beforehand). (h) help Displays the list of options as detailed here. Finally, provided the project has been changed locally and any conflicts have been resolved, the changes can be successfully committed with the svn com m it command, appending the option -m : $ svn commit filename -m"Fixed a typo in filename" Sending filename Transmitting file data . Committed revision 57. $ As can be seen above, the -m option allows a commit message to be recorded. T his is most useful when the message is meaninful, which in turn makes referring back over commits straightforward. T he most updated version is now available for anyone with access to the repository to update their versions to the newest copy. 2.2.6. SVN Documentation T he command svn --help provides information on the available commands to be used in conjunction with SVN and svn subcommand --help provides more detailed information on the specified subcommand. T he official SVN book is available online at http://svnbook.red-bean.com/ T he official SVN website is located at http://subversion.apache.org/ 2.3. Git Git is a version control system that was not written to improve on CVS and SVN but rather in retaliation to them. Git was created with four design points in mind: 1. Not like CVS and SVN. T orvalds, the creator of Git, does not like these programs and wanted to make something that was unlike them. 30 C hapter 2. Collaborating 2. Support a BitKeeper-like workflow. T he way a project is managed ideally follows the same process as BitKeeper, while keeping its own design and not becoming a BitKeeper clone. 3. Strong safeguards against accidental or malicious corruption. 4. Very high performance. T o accomplish this, Git approaches how it handles data differently to its predecessors. T his section will go through the most common processes in a day's use of Git. Previously the version controls covered (CVS and SVN) treated data as changes to a base version of each file. Instead, Git treats its data changes as separate snapshots of what the files look like and stores a reference to that file (though if the file remains unchanged, Git will store a link to the previous identical version rather than copy another file). T his creates a kind of new mini file system. T he image below compares these concepts visually: Figure 2.1. Git Version Control Git is particularly fast, aided by not having to constantly connect to a remote repository. T he snapshot nature of Git and how all versions are stored on the local file system means that nearly everything can be done without connecting to any kind of network and the history of the project is available locally. T o fulfill T orvalds' integrity requirement, everything in Git is check-summed before being stored and then referred to by that check-sum. T his means the contents cannot be changed without Git's knowledge and information cannot be lost in transit or corrupted. A SHA-1 hash mechanism (a forty-character hexadecimal sting) is used for this. In addition, there is very little in Git that cannot be undone. T his is aided by the three main states a file can reside in. Committed Data is safely stored on the local database, and unchanged. Modified 31 Red Hat Enterprise Linux 7 Developer Guide T he file has been changed but not yet committed to the database. Staged A modified file has been marked to be committed in its current version. 2.3.1. Installation Git can be installed either from source or from the console. If the user is confident enough then the recommendation is to install from source, as the binary installers do not always have the most up-to-date version available. T o install Git from source code, use the following procedure: Procedure 2.2. T o install Git from source code 1. Install the libraries Git depends on: curl, zlib, openssl, expat, and libiconv. # yum install curl-devel expat-devel gettext-devel \ openssl-devel zlib-devel gcc 2. Download the latest snapshot from the Git web site, located here: http://git-scm.com/download. 3. Compile and install. # # # # tar -zxf git-1.7.6.1.tar.gz cd git-1.7.6.1 make prefix=/usr/local make prefix=/usr/local install 4. It is now possible to get updates for Git, from Git. $ git clone git://git.kernel.org/pub/scm/git/git.git Installing Git with a binary installer from the console is as simple as using the following command. # yum install git 2.3.2. Initial Setup After installing there are a few steps to personalize Git and get it ready for use. Once these settings are configured, they persist for future Git sessions, however to be change them again in the future, run the commands again. T hese changes are made by altering variables stored in three different places: 1. T he /etc/gitconfig file contains variables for every user on the system and all their repositories. It holds the base settings and passing --system to git config sets it to read and write from this file. 2. T he ~/.gitconfig file is specific to the user. Passing --global tells Git to read and write to this file, overriding the settings made in the first point. 3. T he config file in the Git directory (.git/config) of the repository currently being used. T his is specific to this repository only and overrides the settings in both the first and the second point. 32 C hapter 2. Collaborating Before the first commit, enter some details into Git by supplying the name and email address that will appear with change. For example, if the user's name is John Q. Smith, use the following commands: $ git config --global user.name "John Smith" $ git config --global user.email "[email protected]" As explained above, by passing the --global option these settings remain constant, but can be overridden for specific repositories. By default, whenever an editor is required, Git launches Vi or Vim. However, if this is not preferred it is possible to change this to another editor. T o do so, use the following command: git config --global core.editor EditorName T he diff tool is often used to view the changes in various files, useful for double checking things before committing them. Use the following command to set the preferred diff tool: $ git config --global merge.tool DiffTool Finally, it is useful to check these settings to ensure they are correct. T o do this run: $ git config --list user.name=John Smith [email protected] If there are different settings in different files, Git will list them all, with the last value for the active one. It is also possible for Git to check the specific response to a variable by using the git config {key} command. For example: $ git config user.name John Smith 2.3.3. Git Repository T he Git repository is where the metadata and object database is stored for a project. T his is where the project is pulled from in order to get a local clone of a repository on a local system. T here are two options for obtaining a Git repository. T he first is used when a directory already exists and and is required to initialize a Git repository. T he second is cloning a repository that already exists. T o clone an existing repository (for example, to contribute to) then run the following command: $ git clone git://location/of/git/repository.git Note that the command is git clone as opposed to git checkout as it might be for a version control system similar to CVS and SVN. T his is because Git receives a copy of every file in the project's entire history, as opposed to only the most recent files as with other version control systems. T he above command creates a directory where the name is the last component of the URL, but with any .git suffix removed. However, the clone command can use any other name by appending the desired directory name to the end: 33 Red Hat Enterprise Linux 7 Developer Guide $ git clone git://location/of/git/repository.git my_git_repo Finally, even though this command uses the git:// protocol, it is also possible to use http:// or https:// as appropriate. T o create a new Git repository ready to create data for, first navigate to the project's directory and type: $ git init T his creates a skeleton of a Git repository, containing all the necessary files ready for content to be created and added. Now that either a skeleton Git repository is set up or a local clone copied and ready on the local system it is time to look at the rest of the Git cycle. Figure 2.2. Git Life Cycle T his image shows how the Git cycle works and will be explained in further detail in the following sections. 2.3.4. Untracked Files Untracked files are those that Git does not recognize. T his will occur if a file is newly created or for all files in a new project. T he status of a file can be shown with the git status command. For a newly started project there will be files in the untracked status. $ git status # On branch master # Untracked files: # (use "git add <file>..." to include in what will be committed) # filename nothing added to commit but untracked files present (use "git add" to track) As the status helpfully says, the files will not be included unless Git is told to include them with the git add command. 34 C hapter 2. Collaborating $ git add filename T he command git add filename will add that specific file first to the unmodified section. Use git add . to add all files in the current directory (including any sub-directories), or for example git add * .[ch] to add all .c and .h files in the current directory. 2.3.5. Unmodified Files T he unmodified status is where those files that have not changed are kept. Git is aware of them and is tracking them so that when an edit is made they are transferred to the modified status. Also, after a commit, the files are returned to this state. It is also possible to remove files from this state to stop Git from tracking them. T his will remove them locally as well. T o do so run: $ git rm filename rm 'filename' $ git status # On branch master # # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # deleted: filename # Important Note, that if a file is unmodified, git rm filename will remove the entire file. It is only when a file has uncommitted changes that git rm filename will give a diagnostic and not remove it. T o remove a file despite the uncommitted changes, use the --force or -f option. T o stop Git from tracking a file without removing it locally, use the --cached option, then commit the removal. $ git rm --cached filename $ git commit -m'remove file message' 2.3.6. Modified Status A copy is on the local system ready to edit. As soon as any changes are made Git recognizes the file as modified and moves it to the modified status. Running git status will show this: $ # # # # # # git status On branch master Changed but not updated: (use "git add <file>..." to update what will be committed) modified: filename 35 Red Hat Enterprise Linux 7 Developer Guide T he file has been changed but as of yet it will not be committed (after all, more changes can still be made and it may not be ready to be committed). As the output helpfully points out, using the git add filename command again will push the modified file to the staged status, ready to be committed. $ $ # # # # # # git add filename git status On branch master Changes to be committed: (use "git reset HEAD <file>..." to unstage) new file: filename T his process can become a little more complex if a staged file requires one final edit before it is committed as it will appear in both the staged status and the modified status. If this occurs then a status will look like this: $ # # # # # # # # # # # git status On branch master Changes to be committed: (use "git reset HEAD <file>..." to unstage) modified: filename1 Changed but not updated: (use "git add <file>..." to unstage) modified: filename1 T his is where the Git snapshots are highlighted; there is a snapshot of a file ready to be committed and another snapshot in the modified status. If a commit is run then only the snapshot of the staged status will be committed, not the corrected version. Running git add again will resolve this and the modified snapshot of the file will merge with the snapshot on the staged status, ready to commit the new changes. 2.3.7. Staged Files T he staged status is where the snapshot of all files that are ready to be committed reside. All files in this status will be committed when the command is given. 2.3.7.1. Viewing changes Before committing the snapshots on the staged status, it is a good idea to check the changes made to ensure that they are acceptable. T his is where the command git diff comes in. $ git diff diff --git a/filename b/filename index 3cb747f..da65585 100644 --- a/filename +++ b/filename @@ -36,6 +36,10 @@ def main @commit.parents[0].parents[0].parents[0] end + some code 36 C hapter 2. Collaborating + some more code + a comment + another change - a mistake Running the git diff command with no parameters, as above, compares the working directory to what is in the staged status, displaying changes made but not yet committed. It is also possible to compare the changes between the staged status and what the last commit was by using the --cached option. $ git diff --cached diff --git a/filename b/filename new file mode 100644 index 0000000..03902a1 -- /dev/null +++ b/filename @@ -0,0 +1,5 @@ +file + by name1, name2 + http://path/to/file + + added information to file Note In versions 1.6.1 and later of Git it is also possible to use the --staged option instead of -cached. 2.3.7.2. Committing Changes After checking that all the staged files are correct and ready, it is time to commit the changes. $ git commit T he above command will launch the chosen editor set in the initial setup, or if this was not set up it defaults to Vim. # Please enter the commit message for your changes. Lines starting # with '#' will be ignored, and an empty message aborts the commit. # On branch master # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # new file: filename2 # modified: filename1 ~ ~ ~ ".git/COMMIT_EDITMSG" 10L, 283C As can be seen, the last status report is also included in the editor, though because of the hash (#) it will not be visible in the actual commit log. For more information on what is being committed, pass the -v option with git com m it. T he commit message can be entered here, or it can be entered in the command line with the -m option: 37 Red Hat Enterprise Linux 7 Developer Guide $ git commit -m "commit message" [master]: created 4156dc4f: "commit message" 2 files changed, 3 insertions(+), 1 deletions (-) create mode 100644 filename T he commit message provides some information: the branch committed to (master in this case), what SHA1 checksum the commit has (4156dc4f), how many files were changed, and statistics about what was changed within them. Note It is possible to skip the staging area which can be useful, but holds the risk of committing something that was not ready to be committed yet. T his is done by passing the -a option with git com m it. $ git status # On branch master # # Changed but not updated: # # modified: filename # $ git commit -a -m 'commit message' [master 16e15c7] commit message 1 files changed, 5 insertions(+), 2 deletions(-) 2.3.8. Remote Repositories In order to share a project with the world, push it to a remote repository, hosted on a network or on the internet. T o be able to push to a remote directory, first one must be made. T o do so, run the command git add [shortname] [URL] $ git remote add shortname git://path/to/new/repo T he shortname can now be used in lieu of the URL when referring to the remote repository. Now a repository is added it is possible to print a list of remote repositories. T his is done with the git rem ote command, passing the -v option to display the associated URL as well as just the shortname if desired. Even without adding a new remote repository, if the project was cloned it will list at least the repository it was cloned from. $ git remote -v repo-name git://path/to/new/remote-repository origin git://path/to/original/remote-repository If even this is not enough information running the git show [remote-repository] will list the URL as well as the branches Git is tracking for this particular repository. In order to fetch data from remote repositories (for example, if someone working on the project has pushed new information to them), use the following command: $ git fetch [remote-name] 38 C hapter 2. Collaborating T his pulls down any and all information from this particular remote host that differs from what is on the local copy. Alternatively, running git pull will do the same from the repository the original copy was cloned from. In order to share a project with a wider audience it is required to push it to a remote repository. $ git push remote-repository branch-name T his command pushes the specified branch to the specified repository, but only if the user has write access. In the case of a conflict, pull the new work down first to incorporate it into the local version before pushing it to the remote repository. Finally to rename a repository, run the git rem ote renam e original-name new-name. Keep in mind that this will also change the remote branch names as well. Removing a repository is similar: git rem ote rm remote-name. 2.3.9. Commit Logs After working with a repository for some time, making several changes and commits, it may be required to view the logs of these changes. T his is done with the git log command. When this is run with no arguments, it lists each commit in reverse chronological order, presenting the time and date of the commit, the SHA-1 checksum, the author's name and email, and the commit message. It is possible to include the diff report in these logs, and limit the output by a set number of entries. For example, running git log -p -2 will list the normal log information in addition to the diff reports for the two most recent entries. T o include some statistics at the end of each commit entry, use the git log --stat. T his command will include a list of modified files, how many files were changed, and how many lines were added and removed, followed by a summary of this information, after the commit message. Along with these useful options, there are a number of others which can be passed with this command: --shortstat Similar to the --stat option, but this displays only the changed, insertions, and deletions in a commit. --nam e-only Lists only the files modified after the commit information. --nam e-status Lists the files modified along with the changed, insertions, and deletions. --abbrev-com m it Only displays the first few characters of the SHA-1 checksum, instead of all forty. --relative-date Displays the date relative to the current date. For example, instead of reading T ue July 10:53:11 2011 -0700, it will print 2 weeks ago. --graph Display Prints an ASCII graph of the branch and merge history beside the log output. 39 Red Hat Enterprise Linux 7 Developer Guide --since=[date] Prints the log since a specified date; that is, everything after the date. T he date can be entered in a variety of different formats, be it a specific date (2010-08-23, for example) or a relative date ("1 year 3 days 4 minutes ago", for example). --until=[date] Similar to the --since option, this will print the log up until the specified date; that is, everything before the date. --author name Lists only those commits with the specified name in the author field. --com m itter name Lists only those commits with the specified name in the committer field. 2.3.10. Fixing Problems T here may come a time when mistakes are made and something has to be removed or undone. T his section will cover some of the ways these errors can be fixed. Warning T his is one of the few areas in Git where data can be lost forever. If an undo is performed and then discovered it should not have been, it is highly likely that it is now impossible to recover the lost data. Proceed with caution. T his occurs most often when a commit is pushed too early, committing something that is not yet ready, or making a mistake in the commit message. T his can be fixed by committing over the top of the latest commit using the --am end option. $ git commit --amend If the files on the staged status are different from those in the latest commit, the commit will run normally except it will override the original. If the files are the same, then the option will be provided to change the commit message, again, overriding the previous commit. It is also possible to unstage a staged file. T his can sometimes be required if git add * was used when the intention was to have two (or more) separate commits. T he git status command provides a hint on how to do this as well: # (use "git reset HEAD <file>..." to unstage) So to follow its advice, use the command git reset HEAD filename and the file is now reverted to the modified status rather than the staged status. T o revert a file back to what it looked like at the last commit, the git status command comes to the rescue again in the unstaged status: # (use "git checkout -- <file>..." to discard changes in working directory) 40 C hapter 2. Collaborating Following these instructions with the git checkout -- filename reverts the file. T o reiterate the above warning however, this will cause data loss; only use it when it is certain this version of the file is no longer wanted. 2.3.11. Git Documentation T he main Git man page can be viewed with m an git. T his also provides the commands to access other man pages such as gittutorial(7), Everyday Git[1], and gitglossary(7). T he official Git homepage can be accessed at http://git-scm.com/ where more documentation is available and can be downloaded. T he following is a list of websites containing more detailed Git information. A useful book containing both basic and more advanced Git instructions can be found at http://gitscm.com/book. A Red Hat Magazine article, Shipping quality code with Git: http://magazine.redhat.com/2008/05/02/shipping-quality-code-with-git/. Using Git without feeling stupid - part 1: http://smalltalk.gnu.org/blog/bonzinip/using-git-without-feelingstupid-part-1. Using Git without feeling stupid - part 2: http://smalltalk.gnu.org/blog/bonzinip/using-git-without-feelingstupid-part-2. A description on how to prepare or email patches: http://logcheck.alioth.debian.org/git.html. A Git cheat sheet: http://cheat.errtheblog.com/s/git. A blog by T im Waugh, How I use Git: http://cyberelk.net/tim/2009/02/04/how-i-use-git/. Handling and avoiding conflicts in Git: http://weblog.masukomi.org/2008/07/12/handling-and-avoidingconflicts-in-git. Branching and merging with Git: http://lwn.net/Articles/210045/. Getting the most out of Git in GNOME: http://live.gnome.org/Git/Developers. Git Reference: http://gitref.org/. A successful Git branching model: http://nvie.com/posts/a-successful-git-branching-model/. A quick introduction, Git for the lazy: http://www.spheredev.org/wiki/Git_for_the_lazy. Git tricks, tips, and workflows: http://nuclearsquid.com/writings/git-tricks-tips-workflows/. 41 Red Hat Enterprise Linux 7 Developer Guide Chapter 3. Libraries and Runtime Support Red Hat Enterprise Linux supports the development of custom applications in a wide variety of programming languages using proven, industrial-strength tools. T his chapter describes the runtime support libraries provided in Red Hat Enterprise Linux 7. 3.1. Version Information T he following table compares the version information for runtime support packages in supported programming languages between Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 6, Red Hat Enterprise Linux 5, and Red Hat Enterprise Linux 4. T his is not an exhaustive list. Instead, this is a survey of standard language runtimes, and key dependencies for software developed on Red Hat Enterprise Linux 7. T able 3.1. Language and Runtime Library Versions Package Name Red Hat Enterprise 7 Red Hat Enterprise 6 Red Hat Enterprise 5 Red Hat Enterprise 4 glibc 2.12 2.12 2.5 2.3 libstdc++ 4.8 4.4 4.1 3.4 boost 1.53 1.41 1.33 1.32 java 1.7 1.5 (IBM), 1.6 (IBM, OpenJDK, Oracle Java) 1.4, 1.5, and 1.6 1.4 python 2.7 2.6 2.4 2.3 php 5.4 5.3 5.1 4.3 ruby 2.0 1.8 1.8 1.8 httpd 2.4 2.2 2.2 2.0 postgresql 9.2 8.4 8.1 7.4 mysql 5.4 5.1 5.0 4.1 nss 3.15 3.12 3.12 3.12 openssl 1.0.1e 1.0.0 0.9.8e 0.9.7a libX11 1.6 1.3 1.0 firefox 24.4 3.6 3.6 3.6 kdebase 4.10 4.3 3.5 3.3 gtk2 2.24 2.18 2.10 2.04 Note T he com pat-glibc RPM is included with Red Hat Enterprise Linux 7, but it is not a runtime package and therefore not required for running anything. It is solely a development package, containing header files and dummy libraries for linking. T his allows compiling and linking packages to run in older Red Hat Enterprise Linux versions (using com pat-gcc-* against those headers and libraries). Running rpm -qpi com pat-glibc-* will provide some information on how to use this package. For more information on com pat-glib, see Section 3.3.1, “com pat-glibc” 42 C hapter 3. Libraries and Runtime Support 3.2. Compatibility Compatibility specifies the portability of binary objects and source code across different instances of a computer operating environment. Officially, Red Hat supports current release and two consecutive prior versions. T his means that applications built on Red Hat Enterprise Linux 4 and Red Hat Enterprise Linux 5 will continue to run on Red Hat Enterprise Linux 6 as long as they comply with Red Hat guidelines (using the symbols that have been white-listed, for example). Red Hat understands that as an enterprise platform, customers rely on long-term deployment of their applications. For this reason, applications built against C/C++ libraries with the help of compatibility libraries continue to be supported for ten years. T here are two types of compatibility: Source Compatibility Source compatibility specifies that code will compile and execute in a consistent and predictable way across different instances of the operating environment. T his type of compatibility is defined by conformance with specified Application Programming Interfaces (APIs). Binary Compatibility Binary Compatibility specifies that compiled binaries in the form of executables and Dynamic Shared Objects (DSOs) will run correctly across different instances of the operating environment. T his type of compatibility is defined by conformance with specified Application Binary Interfaces (ABIs). For further information regarding this and all levels of compatibility between core and non-core libraries, refer to Red Hat Enterprise Linux supported releases accessed at https://access.redhat.com/support/policy/updates/errata/ and the general Red Hat Enterprise Linux compatibility policy, accessed at https://access.redhat.com/site/articles/119073. 3.2.1. Static Linking Static linking is emphatically discouraged for all Red Hat Enterprise Linux releases. Static linking causes far more problems than it solves, and should be avoided at all costs. T he main drawback of static linking is that it is only guaranteed to work on the system on which it was built, and even then only until the next release of glibc or libstdc++ (in the case of C++). T here is no forward or backward compatibility with a static build. Furthermore, any security fixes (or general-purpose fixes) in subsequent updates to the libraries will not be available unless the affected statically linked executables are re-linked. A few more reasons why static linking should be avoided are: Larger memory footprint. Slower application startup time. Reduced glibc features with static linking. Security measures like load address randomization cannot be used. Dynamic loading of shared objects outside of glibc is not supported. For additional reasons to avoid static linking, see: Static Linking Considered Harmful. 3.3. Library and Runtime Details 43 Red Hat Enterprise Linux 7 Developer Guide 3.3.1. compat-glibc com pat-glibc provides a subset of the shared static libraries from previous versions of Red Hat Enterprise Linux. For Red Hat Enterprise Linux 7, the following libraries are provided: libanl libcidn libcrypt libc libdl libm libnsl libpthread libresolv librt libthread_db libutil T his set of libraries allows developers to create a Red Hat Enterprise Linux 6 application with Red Hat Enterprise Linux 7, provided the application uses only the above libraries. Use the following command to do so: # gcc -fgnu89-inline -I /usr/lib/x86_64-redhat-linux6E/include -B /usr/lib/x86_64-redhat-linux6E/lib64/ Important Applications that violate the ISO with regards to overlapping source or destination memory locations for m em cpy and other functions will likely fail. 3.3.2. The GNU C++ Standard Library T he libstdc++ package contains the GNU C++ Standard Library, which is an ongoing project to implement the ISO 14882 Standard C++ library. Installing the libstdc++ package will provide just enough to satisfy link dependencies (that is, only shared library files). T o make full use of all available libraries and header files for C++ development, you must install libstdc++-devel as well. T he libstdc++-devel package also contains a GNU-specific implementation of the Standard T emplate Library (ST L). For Red Hat Enterprise Linux 4, 5, and 6, the C++ language and runtime implementation has remained stable and as such no compatibility libraries are required for libstdc++. However, this is not the case for Red Hat Enterprise Linux 2 and 3. For Red Hat Enterprise Linux 2 com pat-libstdc++-296 is required to be installed. For Red Hat Enterprise Linux 3 com pat-libstdc++-33 is required to be installed. 44 C hapter 3. Libraries and Runtime Support Neither of these are installed by default so have to be added separately. 3.3.2.1. GNU C++ Standard Library Updates T he Red Hat Enterprise Linux 6 version of the GNU C++ Standard Library features the following improvements over its Red Hat Enterprise Linux 5 version: Added support for elements of ISO C++ T R1, namely: <tr1/array> <tr1/com plex> <tr1/m em ory> <tr1/functional> <tr1/random > <tr1/regex> <tr1/tuple> <tr1/type_traits> <tr1/unordered_m ap> <tr1/unordered_set> <tr1/utility> <tr1/cm ath> Added support for elements of the upcoming ISO C++ standard, C++0x. T hese elements include: <array> <chrono> <condition_variable> <forward_list> <functional> <initalizer_list> <m utex> <random > <ratio> <regex> <system _error> <thread> 45 Red Hat Enterprise Linux 7 Developer Guide <tuple> <type_traits> <unordered_m ap> <unordered_set> Added support for the -fvisibility command. Added the following extensions: __gnu_cxx::typelist __gnu_cxx::throw_allocator For more information about updates to libstdc++ in Red Hat Enterprise Linux, refer to the C++ Runtime Library section of the following documents: GCC 4.2 Release Series Changes, New Features, and Fixes: http://gcc.gnu.org/gcc-4.2/changes.html GCC 4.3 Release Series Changes, New Features, and Fixes: http://gcc.gnu.org/gcc-4.3/changes.html GCC 4.4 Release Series Changes, New Features, and Fixes: http://gcc.gnu.org/gcc-4.4/changes.html 3.3.2.2. GNU C++ Standard Library Documentation T o use the m an pages for library components, install the libstdc++-docs package. T his will provide m an page information for nearly all resources provided by the library; for example, to view information about the vector container, use its fully-qualified component name: m an std::vector T his will display the following information (abbreviated): std::vector(3) std::vector(3) NAME std::vector A standard container which offers fixed time access to individual elements in any order. SYNOPSIS Inherits std::_Vector_base< _Tp, _Alloc >. Public Types typedef _Alloc allocator_type typedef __gnu_cxx::__normal_iterator< const_pointer, vector > const_iterator typedef _Tp_alloc_type::const_pointer const_pointer typedef _Tp_alloc_type::const_reference const_reference typedef std::reverse_iterator< const_iterator > T he libstdc++-docs package also provides manuals and reference information in HT ML form at the following directory: file:///usr/share/doc/libstdc++-docs-version/htm l/spine.htm l 46 C hapter 3. Libraries and Runtime Support T he main site for the development of libstdc++ is hosted on gcc.gnu.org. 3.3.3. Boost T he boost package contains a large number of free peer-reviewed portable C++ source libraries. T hese libraries are suitable for tasks such as portable file-systems and time/date abstraction, serialization, unit testing, thread creation and multi-process synchronization, parsing, graphing, regular expression manipulation, and many others. Installing the boost package will provide just enough libraries to satisfy link dependencies (that is, only shared library files). T o make full use of all available libraries and header files for C++ development, you must install boost-devel as well. T he boost package is actually a meta-package, containing many library sub-packages. T hese subpackages can also be installed individually to provide finer inter-package dependency tracking. T he metapackage includes all of the following sub-packages: boost-date-tim e boost-filesystem boost-graph boost-iostream s boost-m ath boost-program -options boost-python boost-regex boost-serialization boost-signals boost-system boost-test boost-thread boost-wave Not included in the meta-package are packages for static linking or packages that depend on the underlying Message Passing Interface (MPI) support. MPI support is provided in two forms: one for the default Open MPI implementation [1] , and another for the alternate MPICH2 implementation. T he selection of the underlying MPI library in use is up to the user and depends on specific hardware details and user preferences. Please note that these packages can be installed in parallel, as installed files have unique directory locations. For Open MPI: boost-openm pi boost-openm pi-devel 47 Red Hat Enterprise Linux 7 Developer Guide boost-graph-openm pi boost-openm pi-python For MPICH2: boost-m pich2 boost-m pich2-devel boost-graph-m pich2 boost-m pich2-python If static linkage cannot be avoided, the boost-static package will install the necessary static libraries. Both thread-enabled and single-threaded libraries are provided. 3.3.3.1. Boost Updates T he Red Hat Enterprise Linux 6 version of Boost features many packaging improvements and new features. Several aspects of the boost package have changed. As noted above, the monolithic boost package has been augmented by smaller, more discrete sub-packages. T his allows for more control of dependencies by users, and for smaller binary packages when packaging a custom application that uses Boost. In addition, both single-threaded and multi-threaded versions of all libraries are packaged. T he multithreaded versions include the m t suffix, as per the usual Boost convention. Boost also features the following new libraries: Foreach Statechart T R1 T ypeof Xpressive Asio Bitmap Circular Buffer Function T ypes Fusion GIL Interprocess Intrusive Math/Special Functions Math/Statistical Distributions 48 C hapter 3. Libraries and Runtime Support MPI System Accumulators Exception Units Unordered Proto Flyweight Scope Exit Swap Signals2 Property T ree Many of the existing libraries have been improved, bug-fixed, and otherwise enhanced. 3.3.3.2. Boost Documentation T he boost-doc package provides manuals and reference information in HT ML form located in the following directory: file:///usr/share/doc/boost-doc-version/index.htm l T he main site for the development of Boost is hosted on boost.org. 3.3.4. Qt T he qt package provides the Qt (pronounced "cute") cross-platform application development framework used in the development of GUI programs. Aside from being a popular "widget toolkit", Qt is also used for developing non-GUI programs such as console tools and servers. Qt was used in the development of notable projects such as Google Earth, KDE, Opera, OPIE, VoxOx, Skype, VLC media player and VirtualBox. It is produced by Nokia's Qt Development Frameworks division, which came into being after Nokia's acquisition of the Norwegian company T rolltech, the original producer of Qt, on June 17, 2008. Qt uses standard C++ but makes extensive use of a special pre-processor called the Meta Object Compiler (MOC) to enrich the language. Qt can also be used in other programming languages via language bindings. It runs on all major platforms and has extensive internationalization support. Non-GUI Qt features include SQL database access, XML parsing, thread management, network support, and a unified cross-platform API for file handling. Distributed under the terms of the GNU Lesser General Public License (among others), Qt is free and open source software. T he Red Hat Enterprise Linux 6 version of Qt supports a wide range of compilers, including the GCC C++ compiler and the Visual Studio suite. 3.3.4 .1. Qt Updates Some of the improvements the Red Hat Enterprise Linux 6 version of Qt include: Advanced user experience 49 Red Hat Enterprise Linux 7 Developer Guide Advanced Graphics Effects: options for opacity, drop-shadows, blur, colorization, and other similar effects Animation and State Machine: create simple or complex animations without the hassle of managing complex code Gesture and multi-touch support Support for new platforms Windows 7, Mac OSX 10.6, and other desktop platforms are now supported Added support for mobile development; Qt is optimized for the upcoming Maemo 6 platform, and will soon be ported to Maemo 5. In addition, Qt now supports the Symbian platform, with integration for the S60 framework. Added support for Real-T ime Operating Systems such as QNX and VxWorks Improved performance, featuring added support for hardware-accelerated rendering (along with other rendering updates) Updated cross-platform IDE For more details on updates to Qt included in Red Hat Enterprise Linux 6, refer to the following links: http://doc.qt.nokia.com/4.6/qt4-6-intro.html http://doc.qt.nokia.com/4.6/qt4-intro.html 3.3.4 .2. Qt Creator Qt Creator is a cross-platform IDE tailored to the requirements of Qt developers. It includes the following graphical tools: An advanced C++ code editor Integrated GUI layout and forms designer Project and build management tools Integrated, context-sensitive help system Visual debugger Rapid code navigation tools 3.3.4 .3. Qt Library Documentation T he qt-doc package provides HT ML manuals and references located in /usr/share/doc/qt4 /htm l/. T his package also provides the Qt Reference Documentation, which is an excellent starting point for development within the Qt framework. You can also install further demos and examples from qt-dem os and qt-exam ples. T o get an overview of the capabilities of the Qt framework, refer to /usr/bin/qtdem o-qt4 (provided by qt-dem os). 3.3.5. KDE Development Framework 50 C hapter 3. Libraries and Runtime Support T he kdelibs-devel package provides the KDE libraries, which build on Qt to provide a framework for making application development easier. T he KDE development framework also helps provide consistency across the KDE desktop environment. 3.3.5.1. KDE4 Architecture T he KDE development framework's architecture in Red Hat Enterprise Linux uses KDE4, which is built on the following technologies: Plasma Plasma replaces KDesktop in KDE4. Its implementation is based on the Qt Graphics View Framework, which was introduced in Qt 4.2. For more information about Plasma, refer to http://techbase.kde.org/Development/Architecture/KDE4/Plasma. Sonnet Sonnet is a multilingual spell-checking application that supports automatic language detection, primary/backup dictionaries, and other useful features. It replaces kspell2 in KDE4. KIO T he KIO library provides a framework for network-transparent file handling, allowing users to easily access files through network-transparent protocols. It also helps provides standard file dialogs. KJS/KHT ML KJS and KHT ML are fully-fledged JavaScript and HT ML engines used by different applications native to KDE4 (such as konqueror). Solid Solid is a hardware and network awareness framework that allows you to develop applications with hardware interaction features. Its comprehensive API provides the necessary abstraction to support cross-platform application development. For more information, refer to http://techbase.kde.org/Development/Architecture/KDE4/Solid. Phonon Phonon is a multimedia framework that helps you develop applications with multimedia functionalities. It facilitates the usage of media capabilities within KDE. For more information, refer to http://techbase.kde.org/Development/Architecture/KDE4/Phonon. T elepathy T elepathy provides a real-time communication and collaboration framework within KDE4. Its primary function is to tighten integration between different components within KDE. For a brief overview on the project, refer to http://community.kde.org/RealT ime_Communication_and_Collaboration. Akonadi Akonadi provides a framework for centralizing storage of Parallel Infrastructure Management (PIM) components. For more information, refer to http://techbase.kde.org/Development/Architecture/KDE4/Akonadi. Online Help within KDE4 51 Red Hat Enterprise Linux 7 Developer Guide KDE4 also features an easy-to-use Qt-based framework for adding online help capabilities to applications. Such capabilities include tooltips, hover-help information, and khelpcenter manuals. For a brief overview on online help within KDE4, refer to http://techbase.kde.org/Development/Architecture/KDE4/Providing_Online_Help. KXMLGUI KXMLGUI is a framework for designing user interfaces using XML. T his framework allows you to design UI elements based on "actions" (defined by the developer) without having to revise source code. For more information, refer to http://techbase.kde.org/Development/Architecture/KDE4/XMLGUI_T echnology. Strigi Strigi is a desktop search daemon compatible with many desktop environments and operating systems. It uses its own jstream system which allows for deep indexing of files. For more information on the development of Strigi, refer to http://www.vandenoever.info/software/strigi/. KNewStuff2 KNewStuff2 is a collaborative data sharing library used by many KDE4 applications. For more information, refer to http://techbase.kde.org/Projects/KNS2. 3.3.5.2. kdelibs Documentation T he kdelibs-apidocs package provides HT ML documentation for the KDE development framework in /usr/share/doc/HT ML/en/kdelibs4 -apidocs/. T he following links also provide details on KDErelated programming tasks: http://techbase.kde.org/ http://techbase.kde.org/Development/T utorials http://techbase.kde.org/Development/FAQs http://api.kde.org 3.3.6. GNOME Power Manager T he backend program of the GNOME power management infrastructure is gnom e-power-m anager. It was introduced in Red Hat Enterprise Linux 5 and provides a complete and integrated solution to power management under the GNOME desktop environment. In Red Hat Enterprise Linux 6, the storage-handling parts of hal was replaced by udisks, and the libgnom eprint stack was replaced by print support in gtk2. 3.3.6.1. GNOME Power Management Version Guide T his section will detail what versions of gnom e-power-m anagem ent are shipped with the various Red Hat Enterprise Linux versions. In general, however, Red Hat Enterprise Linux 4 ships with GNOME 2.8, Red Hat Enterprise Linux 5 ships with GNOME 2.16, and Red Hat Enterprise Linux 6 ships with GNOME 2.28. T able 3.2. Desktop Components Comparison 52 C hapter 3. Libraries and Runtime Support Red Hat Enterprise Linux Version GNOME Power Management Desktop Components 4 5 6 hal 0.4.2 0.5.8 0.5.14 udisks N/A N/A 1.0.1 glib2 2.4.7 2.12.3 2.22.5 gtk2 2.4.13 2.10.4 2.18.9 gnome-vfs2 2.8.2 2.16.2 2.24.2 libglade2 2.4.0 2.6.0 2.6.4 libgnomecanvas 2.8.0 2.14.0 2.26.0 gnome-desktop 2.8.0 2.16.0 2.28.2 gnome-media 2.8.0 2.16.1 2.29.91 gnome-python2 2.6.0 2.16.0 2.28.0 libgnome 2.8.0 2.16.0 2.28.0 libgnomeui 2.8.0 2.16.0 2.24.1 libgnomeprint22 2.8.0 2.12.1 N/A libgnomeprintui22 2.8.0 2.12.1 N/A gnome-session 2.8.0 2.16.0 2.28.0 gnome-power-manager N/A 2.16.0 2.28.3 gnome-applets 2.8.0 2.16.0 2.28.0 gnome-panel 2.8.1 2.16.1 2.30.2 3.3.6.2. API Changes for glib T here are a number of API changes for glib between versions. Version 2.4 to Version 2.12 Some of the differences in glib between version 2.4 and 2.12 (or between Red Hat Enterprise Linux 4 and Red Hat Enterprise Linux 5) are: GOption (a command line option parser) GKeyFile (a key/ini file parser) GObject toggle references GMappedFile (a map wrapper) GSlice (a fast memory allocator) GBookmarkFile (a bookmark file parser) Base64 encoding support Native atomic ops on s390 Updated Unicode support to 5 Atomic reference counting for GObject Version 2.12 to Version 2.22 53 Red Hat Enterprise Linux 7 Developer Guide Some of the differences in glib between version 2.12 and 2.22 (or between Red Hat Enterprise Linux 5 and Red Hat Enterprise Linux 6) are: GSequence (a list data structure that is implemented as a balanced tree) GRegex (a PCRE regex wrapper) Support for monotonic clocks XDG user dirs support GIO (a VFS library to replace gnome-vfs) GChecksum (support for hash algorithms such as MD5 and SHA-256) GT est (a test framework) Support for sockets and network IO in GIO GHashT able performance improvements GMarkup performance improvements Documentation for glib, including indexes of new and deprecated APIs, is shipped in the glib2-devel package. 3.3.6.3. API Changes for GTK+ T here are a number of API changes for GTK+ between versions. Version 2.4 to Version 2.10 Some of the differences in GTK+ between version 2.4 and 2.10 (or between Red Hat Enterprise Linux 4 and Red Hat Enterprise Linux 5) are: GtkIconView GtkAboutDialog GtkCellView GtkFileChooserButton GtkMenuT oolButton GtkAssistant GtkLinkButton GtkRecentChooser GtkCellRendererCombo GtkCellRendererProgress GtkCellRendererAccel GtkCellRendererSpin GtkStatusIcon Printing Support 54 C hapter 3. Libraries and Runtime Support Notebook tab DND support Ellipsisation support in labels, progressbars and treeviews Support rotated text Improved themability Version 2.10 to Version 2.18 Some of the differences in GTK+ between version 2.10 and 2.18 (or between Red Hat Enterprise Linux 4 and Red Hat Enterprise Linux 5) are: GtkScaleButton GtkVolumeButton GtkInfoBar GtkBuilder to replace libglade New tooltips API GtkMountOperation gtk_show_uri Scale marks Links in labels Support runtime font configuration changes Use GIO Documentation for GTK+, including indexes of new and deprecated APIs, is shipped in the gtk2-devel package. 3.3.7. NSS Shared Databases T he NSS shared database format, introduced on NSS 3.12, is now available in Red Hat Enterprise 6. T his encompasses a number of new features and components to improve access and usability. Included, is the NSS certificate and key database which are now sqlite-based and allow for concurrent access. T he legacy key3.db and cert8.db are also replaced with new SQL databases called key4 .db and cert9.db. T hese new databases will store PKCS #11 token objects, which are the same as what is currently stored in cert8.db and key3.db. Having support for shared databases enables a system-wide NSS database. It resides in /etc/pki/nssdb where globally trusted CA certificates become accessible to all applications. T he command rv = NSS_InitReadWrite("sql:/etc/pki/nssdb"); initializes NSS for applications. If the application is run with root privileges, then the system-wide database is available on a read and write basis. However, if it is run with normal user privileges it becomes read only. Additionally, a PEM PKCS #11 module for NSS allows applications to load into memory certificates and keys stored in PEM-formatted files (for example, those produced by openssl). 3.3.7.1. Backwards Compatibility 55 Red Hat Enterprise Linux 7 Developer Guide T he binary compatibility guarantees made by NSS upstream are preserved in NSS for Red Hat Enterprise Linux 6. T his guarantee states that the NSS 3.12 is backwards compatible with all older NSS 3.x shared libraries. T herefore, a program linked with an older NSS 3.x shared library will work without recompiling or relinking, and any applications that restrict the use of NSS APIs to the NSS Public Functions remain compatible with future versions of the NSS shared libraries. Red Hat Enterprise Linux 5 and 4 run on the same version of NSS as Red Hat Enterprise Linux 6 so there are no ABI or API changes. However, there are still differences as NSS's internal cryptographic module in Red Hat Enterprise Linux 6 is the one from NSS 3.12, whereas Red Hat Enterprise Linux 5 and 4 still use the older one from NSS 3.15. T his means that new functionality that had been introduced with NSS 3.12, such as the shared database, is now available with Red Hat Enterprise Linux 6's version of NSS. 3.3.7.2. NSS Shared Databases Documentation Mozilla's wiki page explains the system-wide database rationale in great detail and can be accessed here. 3.3.8. Python T he python package adds support for the Python programming language. T his package provides the object and cached bytecode files required to enable runtime support for basic Python programs. It also contains the python interpreter and the pydoc documentation tool. T he python-devel package contains the libraries and header files required for developing Python extensions. Red Hat Enterprise Linux also ships with numerous python-related packages. By convention, the names of these packages have a python prefix or suffix. Such packages are either library extensions or python bindings to an existing library. For instance, dbus-python is a Python language binding for D-Bus. Note that both cached bytecode (*.pyc/*.pyo files) and compiled extension modules (*.so files) are incompatible between Python 2.4 (used in Red Hat Enterprise Linux 5), Python 2.6 (used in Red Hat Enterprise Linux 6), and Python 2.7 (used in Red Hat Enterprise Linux 7). As such, you will be required to rebuild any extension modules you use that are not part of Red Hat Enterprise Linux. 3.3.8.1. Python Updates Red Hat Enterprise Linux 7 ships with Python 2.7. For information about these changes, refer to the following project resource: What's New in Python 2.7: http://docs.python.org/dev/whatsnew/2.7.html Both resources also contain advice on porting code developed using previous Python versions. 56 C hapter 3. Libraries and Runtime Support Important Python provides various APIs for use with C extension modules. One of these APIs, PyCObject, was deprecated in Python 2.7. By default, deprecation warnings are ignored so this will not normally cause any problems. However, if the standard warning settings are overridden, there may be problems with modules that use PyCObject and assume that the import succeeds. In particular, if warnings have been set to "error", it is possible to make the Python interpreter abort or even segfault when importing such modules due to reading through the NULL pointer triggered by the deprecation error. T o enable errors-for-warnings and use such a module, add an override so that a PendiingDeprecationWarning is logged instead of raising an exception. >>> import warnings >>> warnings.simplefilter('error') >>> warnings.simplefilter('default', PendingDeprecationWarning) 3.3.8.2. Python Debug Build Red Hat Enterprise Linux 7 ships with a debug build of the python interpreter in the python-debug package. T he debug interpreter (found in /usr/bin/python-debug) runs at about half the speed as the optimized interpreter (found in /usr/bin/python) and requires extentions models to be rebuilt for it but is still of use when writing and debugging Python C extension modules. Within the debug build, optimization levels are turned down, making it easier to step through code within the debugger. T he debug build is configured with additional debug settings: --with-pydebug Adds various useful methods to sys, such as sys.gettotalrefcount() and sys.getobjects(). --with-count-allocs Enables the COUNT _ALLOCS setting, which adds a sys.getcounts() method, providing information on all types.T he default upstream behavior is to always dump this information on stdout when the process exists. T his is patched downstream so that the information is only dumped on exit if PYT HONDUMPCOUNT S is set in the environment. --with-call-profile Enables the CALL_PROFILE setting. T his counts the number of function calls executed, and on how the interpreter handled those calls. --with-tsc (only on x86_64 and ppc64 ) Adds a sys.settscdum p() method, adding very low-level profiling of the interpreter. 57 Red Hat Enterprise Linux 7 Developer Guide FT he debug build uses the same bytecode files as the regular optimized build, but extension modules (.so files) are not compatible. T his is because the in-memory layout of Python objects differs due to the extra instrumentation. Given an optimized extension model foo.so, the debug build is patched to look for foo_d.so. For more information on the debug build and its settings, see the notes upstream at http://svn.python.org/projects/python/trunk/Misc/SpecialBuilds.txt. 3.3.8.3. Python Documentation For more information about Python, refer to m an python. You can also install python-docs, which provides HT ML manuals and references in the following location: file:///usr/share/doc/python-docs-version/htm l/index.htm l For details on library and language components, use pydoc component_name. For example, pydoc m ath will display the following information about the m ath Python module: Help on module math: NAME math FILE /usr/lib64/python2.6/lib-dynload/mathmodule.so DESCRIPTION This module is always available. It provides access to the mathematical functions defined by the C standard. FUNCTIONS acos[...] acos(x) Return the arc cosine (measured in radians) of x. acosh[...] acosh(x) Return the hyperbolic arc cosine (measured in radians) of x. asin(...) asin(x) Return the arc sine (measured in radians) of x. asinh[...] asinh(x) Return the hyperbolic arc sine (measured in radians) of x. T he main site for the Python development project is hosted on python.org. 3.3.9. Java Red Hat Enterprise Linux 7 is constantly updated to ship the latest version of JDK. T he java-version_number-openjdk package adds support for the Java programming language. T his package provides the java interpreter. T he java-version_number-openjdk-devel package contains the javac compiler, as well as the libraries and header files required for developing Java extensions. 58 C hapter 3. Libraries and Runtime Support Red Hat Enterprise Linux also ships with numerous java-related packages. By convention, the names of these packages have a java prefix or suffix. 3.3.9.1. Java Features Java has a number of new features with Red Hat Enterprise Linux 7. T hese include the following: Support for dynamically-typed languages (InvokeDynamic) Enhancements are made to Hotspot, Open JDK's Java Virtual Machine (JVM). T hese are designed to support dynamically typed languages with minimal performance cost as compared to statically typed languages and Java itself. Specifically, the invokedynamic instruction was added to the Java bytecode specification and implemented in the JVM. Small language enhancements (Project Coin) A number of Java language-level improvements that provide programmer conveniences, more elegant code, and reduces some common programming errors. Strings in switch In prior Java versions, switch statements allowed the use of byte, short, char, and int primitives and their corresponding object types, as well as enums. As of Java 7, string values may also be used in switch statements. Binary integral literals and underscores in numeric literals Programmers may now express integral literals in binary form, or separate groups of digits in numerical literal values by underscores, in order to improve code readability. Multi-catch Java's catch syntax has been improved so that more than one exception type can be caught in a single catch clause, reducing redundant code. More precise rethrow T he Java 7 compiler has been improved so that a method that catches and then rethrows an exception can be more precise in the throws clause of the method declaration in some circumstances. Improved type inference for generic instance creation (diamond) T his syntactical improvement allows programmers to use the diamond operator (that is, <>) instead of the full generic type (for example, <ClassName>) when instantiating variables of generic types. T he type is inferred from that variable's declaration instead. T ry-with-resources statement T his is a new form of try statement for use with closeable resources, such as streams and files. Using this feature, programmers no longer need to explicitly close these resources. Simplified varags method invocation Previously, a compiler warning would be issued when calling vararg methods with non-reifiable arguments. T his has been removed and replaced with a warning at the declaration of a vararg method that can accept non-reifiable arguments. An annotation can be used to suppress this warning, in which case the developer takes responsibility that the arguments are correct. T his primarily applies to vararg methods that accept generic arguments. 59 Red Hat Enterprise Linux 7 Developer Guide Concurrency and collections updates A number of new classes and interfaces, including a fork/join framework for divide and conquer type algorithms, has been added to the java.util.concurrency package. T hese can be useful for improving performance and correctness of multi-threaded programs. New I/O AIPs for the Java platform T his includes a new file system API to improve cross-platform compatibility while making graceful failure handling easier for developers. It provides improved socket/channel API in the java.nio.channels package to remove unintuitive dependences on the java.net package. It also provides a new asynchronous I/O API. Nimbus look and feel for swing Informally introduced in Java 6 under the com .sun.java.swing package namespace, Nimbus has a vector-graphics based look and feel for swing. With Java 7, it has become an official API and moved to the javax.swing package. 3.3.9.2. Java Documentation For more information about Java, refer to m an java. Some associated utilities also have their own respective m an pages. You can also install other Java documentation packages for more details about specific Java utilities. By convention, such documentation packages have the javadoc suffix (for example, dbus-javajavadoc). T he main site for the development of Java is hosted on http://openjdk.java.net/. T he main site for the library runtime of Java is hosted on http://icedtea.classpath.org. 3.3.10. Ruby T he ruby package provides the Ruby interpreter and adds support for the Ruby programming language. T he ruby-devel package contains the libraries and header files required for developing Ruby extensions. Red Hat Enterprise Linux also ships with numerous ruby-related packages. By convention, the names of these packages have a ruby or rubygem prefix or suffix. Such packages are either library extensions or Ruby bindings to an existing library. Examples of ruby-related packages include: ruby-irb ruby-libguestfs ruby-libs ruby-qpid ruby-rdoc ruby-ri ruby-tcltk rubygems 60 C hapter 3. Libraries and Runtime Support rubygem-bigdecimal rubygem-devel rubygem-io-console rubygem-json rubygem-minitest rubygem-rake Note If the Bundler is used for managing application dependencies, please always use the Bundler provided by the rubygem -bundler package. T he upstream package is not compatible with the RubyGems layout used by Red Hat Enterprise Linux 7. 3.3.10.1. Ruby Updates For information about updates to the Ruby language in Red Hat Enterprise Linux 7, refer to the following resources: file:///usr/share/doc/ruby-version/NEWS file:///usr/share/doc/ruby-version/NEWS-version Ruby has undergone significant changes in its filesystem layout, which now better conforms with FHS. Binary libraries and extensions of Gems are placed under /usr/lib (or /usr/lib64 for 64-bit systems) and pure Ruby libraries and Gems are placed under /usr/share. Gems are located in three places according to the selected method of their installation: /usr /usr/local ~/.gem 3.3.10.2. Ruby Documentation For more information about Ruby, refer to m an ruby. You can also use the ri command, which is the Ruby API reference front end. For gem documentation, use the gem server command that makes HT ML manuals and references about gems installed on your system available in a browser. Note It may be necessary to install the -doc sub-package to make the documentation available using the ri and gem server commands. T he main site for the development of Ruby is hotsed on http://www.ruby-lang.org. T he http://www.rubydoc.org site also contains Ruby documentation. Online documentation for gems can be found at http://rdoc.info. Documentation for the ri command can be found in /usr/share/ri/system . 61 Red Hat Enterprise Linux 7 Developer Guide 3.3.11. Perl T he perl package adds support for the Perl programming language. T his package provides some of the Perl core modules, the Perl Language Interpreter, and the perldoc tool. Red Hat Enterprise Linux 7 ships with perl-5.16. T o install all of the core modules, use the yum install perl-core command. Red Hat also provides various perl modules in package form; these packages are named with the perl-* prefix. T hese modules provide stand-alone applications, language extensions, Perl libraries, and external library bindings. An RPM package can contain more Perl modules. Each module intended for public use is provided by the package in the form perl(The::Module). T his expression can be passed to yum to install the approprirate packages. Example 3.1. Install perl module # yum install 'perl(LWP::UserAgent)' T his will install the RPM package perl-libwww-perl, which contains the LWP::UserAgent module, allowing a programer to use the command use LWP::UserAgent;. 3.3.11.1. Perl Updates Red Hat Enterprise Linux 7 ships with perl 5.16 which has a number of changes since the 5.10 version shipped in Red Hat Enterprise Linux 6. T hese include: Perl 5.12 Updates Perl 5.12 has the following updates: Perl conforms closer to the Unicode standard. Experimental APIs allow Perl to be extended with "pluggable" keywords and syntax. Perl will be able to keep accurate time well past the "Y2038" barrier. Package version numbers can be directly specified in "package" statements. Perl warns the user about the use of depreciated features by default. T he Perl 5.12 delta can be accessed at http://perldoc.perl.org/perl5120delta.html. Perl 5.14 Updates Perl 5.14 has the following updates: Unicode 6.0 support. Improved support for IPv6. Easier auto-configuration of the CPAN client. A new /r flag that makes s/// substitutions non-destructive. New regular expression flags to control whether matched strings should be treated as ASCII or Unicode. New package Foo { } syntax. 62 C hapter 3. Libraries and Runtime Support Less memory and CPU usage than previous releases. A number of bug fixes. T he Perl 5.14 delta can be accessed at http://perldoc.perl.org/perl5140delta.html. Perl 5.16 Updates Perl 5.16 has the following updates: Support for Unicode 6.1. $$ variable is writable. Improved debugger. Accessing Unicode database files directly is now depreciated; use Unicode::UCD instead. Version::Requirements is depreciated in favor of CPAN::Meta::Requirements. A number of perl4 libraries are removed: abbrev.pl assert.pl bigfloat.pl bigint.pl bigrat.pl cacheout.pl complete.pl ctime.pl dotsh.pl exceptions.pl fastcwd.pl flush.pl getcwd.pl getopt.pl getopts.pl hostname.pl importenv.pl lib/find.pl lib/finddepth.pl look.pl newgetopt.pl 63 Red Hat Enterprise Linux 7 Developer Guide open2.pl open3.pl pwd.pl hellwords.pl stat.pl tainted.pl termcap.pl timelocal.pl T he Perl 5.16 delta can be accessed at http://perldoc.perl.org/perl5160delta.html. 3.3.11.2. Installation Perl's capabilities can be extended by installing additional modules. T hese modules come in the following forms: Official Red Hat RPM T he official module packages can be installed with yum or rpm from the Red Hat Enterprise Linux repositories. T hey are installed to /usr/share/perl5 and either /usr/lib/perl5 for 32bit architectures or /usr/lib64 /perl5 for 64bit architectures, as well as vendor_perl subdirectories. Modules from CPAN Use the cpan tool provided by the perl-CPAN package to install modules directly from the CPAN website. T hey are installed to /usr/local/share/perl5 and either /usr/local/lib/perl5 for 32bit architectures or /usr/local/lib64 /perl5 for 64bit architectures if these directories exist and are writable by the current user. If the directories do not exist the cpan tool will offer different solutions. Warning: You do not have write permission for Perl library directories. To install modules, you need to configure a local Perl library directory or escalate your privileges. CPAN can help you by bootstrapping the local::lib module or by configuring itself to use 'sudo' (if available). You may also resolve this problem manually if you need to customize your setup. What approach do you want? (Choose 'local::lib', 'sudo' or 'manual') [local::lib] For example, if 'manual' is selected, it will assme the user will ensure the directories exist and are writable before installing modules from CPAN. T hird party and custom module packages T hese packaged modules are installed to /usr/share/perl5/vendor_perl and either /usr/lib/perl5/vendor_perl for 32bit architectures or /usr/lib64 /perl5/vendor_perl for 64bit architectures. If their file names conflict with Red Hat Enterprise Linux packages, either change the file names or properly replace the Red Hat Enterprise Linux packages with the delivering packages. 64 C hapter 3. Libraries and Runtime Support Warning If an official version of a module is already installed, installing its non-official version can create conflicts in the /usr/share/m an directory. If an additional Perl module search path is necessary, the /usr/local/share/perl5/sitecustom ize.pl script can be used for system-wide modification (see the perlrun(1) man page), or perl-homedir package for user specific modifications (see the perlhomedir package description). 3.3.11.3. Perl Documentation T he perldoc tool provides documentation on language and core modules. T o learn more about a module, use perldoc m odule_nam e. For example, perldoc CGI will display the following information about the CGI core module: NAME CGI - Handle Common Gateway Interface requests and responses SYNOPSIS use CGI; my $q = CGI->new; [...] DESCRIPTION CGI.pm is a stable, complete and mature solution for processing and preparing HTTP requests and responses. Major features including processing form submissions, file uploads, reading and writing cookies, query string generation and manipulation, and processing and preparing HTTP headers. Some HTML generation utilities are included as well. [...] PROGRAMMING STYLE There are two styles of programming with CGI.pm, an object-oriented style and a function-oriented style. In the object-oriented style you create one or more CGI objects and then use object methods to create the various elements of the page. Each CGI object starts out with the list of named parameters that were passed to your CGI script by the server. [...] For details on Perl functions, use perldoc -f function_name. For example, perldoc -f split wil display the following information about the split function: split /PATTERN/,EXPR,LIMIT split /PATTERN/,EXPR split /PATTERN/ split Splits the string EXPR into a list of strings and returns that list. By default, empty leading fields are preserved, and empty trailing ones are deleted. (If all fields are empty, they are considered to be trailing.) In scalar context, returns the number of fields found. In scalar and void context it splits into the @_ array. Use of split in scalar and void context is deprecated, however, because it clobbers your subroutine arguments. 65 Red Hat Enterprise Linux 7 Developer Guide If EXPR is omitted, splits the $_ string. If PATTERN is also omitted, splits on whitespace (after skipping any leading whitespace). Anything matching PATTERN is taken to be a delimiter separating the fields. (Note that the delimiter may be longer than one character.) [...] Current perldoc documentation can be found on perldoc.perl.org. Core and external modules are documented on the Comprehensive Perl Archive Network. 3.3.12. libStorageMgmt Plug-ins Red Hat Enterprise Linux 7 ships with a new library called libStorageMgm t. It is a storage array independent Application Programming Interface (API) that provides a stable and consistent API allowing developers to programmatically manage different storage arrays and leverage the hardware accelerated features provided. For more information on the libStorageMgm t library refer to Red Hat's Storage Administration Guide. T his section details how to write plug-ins for the library. Plug-ins work somewhat differently with the libStorageMgm t library. T he plug-ins execute in their own address space as stand-alone executables with inter-process communication (IPC) between the client and plug-in. When a client application or the libStorageMgm t command line (lsm cli) utilizes the library, the following occurs: 1. T he library uses the uniform resource identifier (URI) and parses out which plug-in was specified. For example, LSMCLI_URI=sim :// refers to the simulator plug-in. 2. T he library uses the plut-in name sim and looks for the unix domain socket in the socket directory. T he default directory is /var/run/lsm /ipc but this can be changed at run-time by specifying the LSM_UDS_PAT H environment variable. 3. T he client library opens the unix domain socket, causing the lsm d daemon to accept the connection from the client. T he daemon then forks and executes the plut-in, passing the socket descriptor on the command line to the plug-in. T he client process now has a direct connection to the plug-in. 4. T he lsm d is no longer in the path and goes back to sleep waiting for another process to open a socket. T here are a number of benifits to this different design. T hese include: If a daemon dies or is killed, any existing client plug-in sessions remain active. If a plug-in crashes, the client process will remain operational. T he daemon needs to know nothing of the IPC protocol, keeping it simple. T he plug-in can be closed source if required by the vendor. 3.3.12.1. Writing a plug in for libStorageMgm t library T he libStorageMgm t library has a plug-in API for both C and Python. Any language that supports suckets and text can also be used to write a plug-in, but the library provides the abstraction that hides this complexity. 66 C hapter 3. Libraries and Runtime Support T he following are some general guidelines for plug-in design regardless of the programming language used: T hreading or multi-process T he library does not provide locking, nor does it keep any global state. As such, it is valid for a client to have a spearate plug-in instance in use for each thread or process. Plug-ins can anticipate that multiple instances of themselves can and possibley will be running at concurrently to different arrays. As the library provides a mechanism for long-running operations, multiple plug-in instances for the same array are not needed. Plug-ins execute with non-root privilages T o reduce the potential for local exploits, plug-ins have reduced privilages. T his needs to be taken into account when writing and designing plug-ins. Plug-in lifetime T he client API provides for a handle that is opened and closed for each plug-in instance. During this time the plug-in is free to cache whatever data is necessary to provide correct opperation. When using the lsm cli tool, the lifetime is only for one command. Logging Plug-ins log errors to syslog. Helper functions exist to facilitate this in the library. Errors T he library uses well defined error codes in order to remain language agnostic. Additional error data can be retrieved when they occur to provide textual error messages and optionally debug data from the plug-in or the array itslef. It is the library callers' responsibility to retrieve this additional information after an error occurs and before issuing another command. If additional error data exists and other functions are called, then the aditional error information will be lost. C does not support exceptions. For languages that do support exceptions, a custom exception class containing the error code and additional information is provided. Location and naming Plug-ins are located in the /usr/bin directory. T he name format must be _lsm plugin. T his is because when the daemon startsit iterates in the directory enumerating them. Job Control T he methods to get and set the time-out are used to specify how long the plug-in waits for a response from the array. If an operation can not safely complete within the time-out, the call returns a job id so that the client can check on the status of the operation. Job IDs are free form strings and are plug-in defined. T he plug-in implementation needs to determine everything about the asynchronous operation from this string between invocations of the plug-in. T o write a plug-in, the following base functions or methods are required for all plug-ins, regardless of the language used: get/set timeout startup/shutdown job status job free 67 Red Hat Enterprise Linux 7 Developer Guide capabilities plug-in information pools systems A unique name must also be chosen so that the main execuatble has the form name_lsm plugin. T he following sections detail how to write a plug-in for python and for C. 3.3.12.1.1. Writing a plug-in with Python First, implement the interface that supports the level of functionality to be provided (refer to iplugin.py). Most plug-ins will either inherit from lStorageAreaNetwork or INfs, or both if the plug-in supports block and network file systems. Next, call the plug-in runner, passing the name of the class and the command line arguments to it for processing and executing the run method. #!/usr/bin/env python import sys from lsm.pluginrunner import PluginRunner from lsm.simulator import StorageSimulator if __name__ == '__main__': PluginRunner(StorageSimulator, sys.argv).run() Note During development it is possible to call the plug-in directly on the command line for easier debugging. 3.3.12.1.2. Writing a plug-in with C First, include the required header file #include <libstoragem gm t/libstoragem gm t_plug_interface.h>. T hen, implement the callback functions that will be supported, along with the required ones. Finally, pass the command line count and arguments to the library with load and unload functions. #include <libstoragemgmt/libstoragemgmt_plug_interface.h> #include <stdlib.h> #include <stdint.h> static char name[] = "Simple limited plug-in example"; static char version [] = "0.01"; struct plugin_data { uint32_t tmo; /* All your other variables as needed */ }; /* Create the functions you plan on implementing that 68 C hapter 3. Libraries and Runtime Support match the callback signatures */ static int tmoSet(lsm_plugin_ptr c, uint32_t timeout, lsm_flag flags ) { int rc = LSM_ERR_OK; struct plugin_data *pd = (struct plugin_data*)lsm_private_data_get(c); /* Do something with state to set timeout */ pd->tmo = timeout; return rc; } static int tmoGet(lsm_plugin_ptr c, uint32_t *timeout, lsm_flag flags ) { int rc = LSM_ERR_OK; struct plugin_data *pd = (struct plugin_data*)lsm_private_data_get(c); /* Do something with state to get timeout */ *timeout = pd->tmo; return rc; } /* Setup the function addresses in the appropriate required callback structure */ static struct lsm_mgmt_ops_v1 mgmOps = { tmoSet, tmoGet, NULL, NULL, NULL, NULL, NULL }; int load( lsm_plugin_ptr c, const char *uri, const char *password, uint32_t timeout, lsm_flag flags ) { /* Do plug-in specific init. and setup callback structures */ struct plugin_data *data = (struct plugin_data *) malloc(sizeof(struct plugin_data)); if (!data) { return LSM_ERR_NO_MEMORY; } /* Call back into the framework */ int rc = lsm_register_plugin_v1( c, data, &mgmOps, NULL, NULL, NULL); return rc; } int unload( lsm_plugin_ptr c, lsm_flag flags) { /* Get a handle to your private data and do clean-up */ struct plugin_data *pd = (struct plugin_data*)lsm_private_data_get(c); free(pd); return LSM_ERR_OK; } int main(int argc, char *argv[] ) { return lsm_plugin_init_v1(argc, argv, load, unload, name, version); } 3.3.12.2. Writing Plug-in References 69 Red Hat Enterprise Linux 7 Developer Guide T he libStorageMgmt Writing Plug-ins wiki https://sourceforge.net/p/libstoragemgmt/wiki/WritingPlugins/ [1] MPI s up p o rt is no t availab le o n IBM Sys tem Z mac hines (where O p en MPI is no t availab le). 70 C hapter 4 . Compiling and Building Chapter 4. Compiling and Building Red Hat Enterprise Linux includes many packages used for software development, including tools for compiling and building source code. T his chapter discusses several of these packages and tools used to compile source code. 4.1. GNU Compiler Collection (GCC) T he GNU Compiler Collection (GCC) is a set of tools for compiling a variety of programming languages (including C, C++, ObjectiveC, ObjectiveC++, Fortran, and Ada) into highly optimized machine code. T hese tools include various compilers (like gcc and g++), run-time libraries (like libgcc, libstdc++, libgfortran, and libgom p), and miscellaneous other utilities. Red Hat Enterprise Linux 7 is on PPC64 architecture. T his means that GCC generates code for POWER7 platforms with tuning to POWER7 by default. T he following tables detail the default codes for various platforms: T able 4 .1. Default Codes for i?86 Option Default Code mtune generic march x86-64 redhat-rpm -config, used for building packages, also contains the -m fpm ath=sse option. T able 4 .2. Default Codes for x86_64 Option Default Code mtune generic march x86-64 T able 4 .3. Default Codes for s390 and s390x Option Default Code mtune zEC12 march z196 T able 4 .4 . Default Codes for ppc, ppc64 , and ppc64 p7 Option Default Code mtune power7 mcpu power7 T he above table is for both 32-bit and 64-bit compilations. It is possible to generate code for other targets using the -m arch=CPU option. T uning the code for a specific chip is performed by using the -m tune=CPU option. T he -m arch option implies the -m tune option. T he -m arch=native option instructs the compiler to generate code for the processor type of the compiling machine. 71 Red Hat Enterprise Linux 7 Developer Guide Note T he -m arch option does not exist on PPC64 architecture. Use the -m cpu option instead. 4.1.1. Changes in GCC Red Hat Developer T oolset 2.0 is distributed with GCC 4 .8, which provides a number of bug fixes and feature enhancements over the Red Hat Enterprise Linux system version and the version included in Red Hat Developer T oolset 1.1. Below is a comprehensive list of new features and compatibility changes in this release. 4 .1.1.1. Changes Since Red Hat Developer T oolset 1.1 T he following features have been added since the release of GCC included in Red Hat Developer T oolset 1.1. 4 .1.1.1.1. Caveats Aggressive Loop Optimizations T he loop optimizer of GCC has been improved to use language constraints in order to derive bounds for the number of iterations of a loop. T he bounds are then used as a guide to loop unrolling, peeling, and loop exit test optimizations. T he optimizations assume that the loop code does not invoke undefined behavior by, for example, causing signed integer overflows or making out-of-bound array accesses. For example, consider the following code fragment: unsigned int foo() { unsigned int data_data[128]; for (int fd = 0; fd < 128; ++fd) data_data[fd] = fd * (0x02000001); // error return data_data[0]; } When the value of the fd variable is 64 or above, the fd * 0x02000001 operation overflows, which is invalid in both C and C++ for signed integers. In the example above, GCC may generate incorrect code or enter an infinite loop. T o fix this error, use the appropriate casts when converting between signed and unsigned types to avoid overflows, for instance: data_data[fd] = (uint32_t) fd * (0x02000001U); // ok If necessary, this optimization can be turned off by using the new command line option -fnoaggressive-loop-optim izations. 4 .1.1.1.2. General Improvements and Changes New Local Register Allocator 72 C hapter 4 . Compiling and Building GCC 4.8 features a new Local Register Allocator (LRA), which replaces the 26-year old reload pass and improves the quality of generated code. T he new local register allocator is meant to be simpler, easier to debug, and does a better job of register allocation. AddressSanitizer A fast memory error detector called AddressSanitizer has been added and can be enabled by using the fsanitize=address command line option. It augments memory access instructions in order to detect use-after-free and out-of-bound accesses to objects on the heap. T hreadSanitizer A fast data race detector called ThreadSanitizer has been added in GCC 4.8. T he option to enable this feature is -fsanitize=thread. Compiling Extremely Large Functions Many scalability bottlenecks have been removed from GCC optimization passes. As a consequence, it is now possible to compile extremely large functions with smaller memory consumption in less time. New -Og Optimization Level A new general optimization level, -Og, has been introduced. T his optimization level addresses the need for fast compilation and a superior debugging experience while providing a reasonable level of runtime performance. Overall, the development experience should be better than the default optimization level -O0. Caret Diagnostic Messages T he diagnostic messages of GCC, which display a line of source code, now also show a caret that indicates the column where the problem was detected. For example: fred.cc:4:15: fatal error: foo: No such file or directory #include <foo> ^ compilation terminated. New -fira-hoist-pressure Option A new command line option, -fira-hoist-pressure, has been added. T his option uses the register allocator to help decide when it is worthwhile to move expressions out of loops. It can reduce the size of the compiler code, but it slows down the compiler. T his option is enabled by default at -Os. New -fopt-info Option A new command line option, -fopt-info, has been added. T his option controls printing information about the effects of particular optimization passes, and takes the following form: -fopt-info[-info][=file_name] T he info part of the option controls what is printed. Replace it with optim ized to print information when optimization takes place, m issed to print information when optimization does not take place, note to print more verbose information, or optall to print everything. Replace file_name with the name of the file in which you want the information to be written. If you omit this part of the option, GCC writes the information to the standard error output stream. 73 Red Hat Enterprise Linux 7 Developer Guide For example, to display a list of optimizations that were enabled by the -O2 option but had no effect when compiling a file named foo.c, type: gcc -O2 -fopt-info-missed foo.c New -floop-nest-optimize Option A new command line option, -floop-nest-optim ize, has been added. T his option enables an experimental ISL-based loop nest optimizer, a generic loop nest optimizer that is based on the Pluto optimization algorithms and that calculates a loop structure optimized for data-locality and paralelism. For more information about this optimizer, see http://pluto-compiler.sourceforge.net. Hot and Cold Attributes on Labels T he hot and cold function attributes can now also be applied to labels. Hot labels tell the compiler that the execution path following the label is more likely than any other execution path, and cold labels convey the opposite meaning. T hese attributes can be used in cases where __builtin_expect cannot be used, for instance with a computed goto or asm goto. 4 .1.1.1.3. Debugging Enhancements DWARF4 DWARF4 is now used as the default debugging data format when generating debugging information. T o get the maximum benefit from this new debugging representation, use the latest version of Valgrind, elfutils, and GDB included in this release. New -gsplit-dwarf Option A new command line option, -gsplit-dwarf, has been added. T his option tells the compiler driver to separate as much DWARF debugging information as possible into a separate output file with the .dwo file extension, and allows the build system to avoid linking files with debugging information. In order to be useful, this option requires a debugger capable of reading .dwo files, such as the version of GDB included in Red Hat Developer T oolset 2.0. Note elfutils, SystemT ap, and Valgrind do not support the .dwo files. 4 .1.1.1.4 . C++ Changes Experimental C++ Features from an Upcoming Standard g++ now supports a new command line option, -std=c++1y. T his option can be used for experimentation with features proposed for the next revision of the standard that is expected around 2014. Currently, the only difference from -std=c++11 is support for return type deduction in normal functions as proposed in N3386. New thread_local Keyword g++ now implements the C++11 thread_local keyword. In comparison with the GNU __thread keyword, thread_local allows dynamic initialization and destruction semantics. 74 C hapter 4 . Compiling and Building T he use of the thread_local keyword has currently one important limitation: when the dlclose() function is used to unload a dynamically loaded DSO that contains the definition of a thread_local object, the thread_local object is destroyed, its destructor is called and the DSO is unmapped from the address space of the process. If a thread in the process tries to access the thread_local object after this, the program may terminate unexpectedly. As a result, the programmer may have to take extra care to ensure that thread_local objects in a DSO are not referred after it has been unloaded. See also the next item for dynamic initialization issues. Dynamic Initialization of T hread-local Variables T he C++11 and OpenMP standards allow thread-local and thread-private variables to have dynamic (that is, runtime) initialization. T o support this, any use of such a variable goes through a wrapper function that performs necessary initialization. When the use and definition of the variable are in the same translation unit, this overhead can be optimized away, but when the use is in a different translation unit, there is significant overhead even if the variable does not actually need dynamic initialization. If the programmer can be sure that no use of the variable in a non-defining translation unit needs to trigger dynamic initialization (either because the variable is statically initialized, or a use of the variable in the defining translation unit will be executed before any uses in another translation unit), they can avoid this overhead by using the new -fnoextern-tls-init option. By default, g++ uses the -fextern-tls-init option. C++11 Attribute Syntax g++ now implements the C++11 attribute syntax, for example: [[noreturn]] void f(); C++11 Alignment Specifier g++ now implements the C++11 alignment specifier, for example: alignas(double) int i; 4 .1.1.1.5. Fortran Changes 4 .1.1.1.5.1. Caveats T he version of module files (the .m od files) has been incremented. Fortran modules compiled by earlier GCC versions have to be recompiled when they are used by files compiled with GCC 4.8, as this version of GCC is not able to read .m od files created by earlier versions; attempting to do so fails with an error message. Note T he ABI of the produced assembler data itself has not changed; object files and libraries are fully compatible with older versions except as noted in Section 4.1.1.1.5.2, “ABI Compatibility”. 4 .1.1.1.5.2. ABI Compatibility 75 Red Hat Enterprise Linux 7 Developer Guide Some internal names used in the assembler or object file have changed for symbols declared in the specification part of a module. If an affected module — or a file using it via use association — is recompiled, the module and all files which directly use such symbols have to be recompiled as well. T his change only affects the following kind of module symbols: Procedure pointers. Note that C-interoperable function pointers (type(c_funptr)) are not affected, nor are procedure-pointer components. Deferred-length character strings. 4 .1.1.1.5.3. Other Changes BACKT RACE Intrinsic A new intrinsic subroutine, BACKT RACE, has been added. T his subroutine shows a backtrace at an arbitrary place in user code, program execution continues normally afterwards. Floating Point Numbers with “q” as Exponential Reading floating point numbers that use q for the exponential (such as 4 .0q0) is now supported as a vendor extension for better compatibility with old data files. It is strongly recommended to use the equivalent but standard conforming e (such as 4 .0e0) for I/O. For Fortran source code, consider replacing the q in floating-point literals by a kind parameter (such as 4 .0e0_qp with a suitable qp). Note that — in Fortran source code — replacing q with a simple e is not equivalent. GFORT RAN_T MPDIR Environment Variable T he GFORT RAN_T MPDIR environment variable for specifying a non-default directory for files opened with ST AT US="SCRAT CH", is not used anymore. Instead, gfortran checks the POSIX/GNU standard T MPDIR environment variable and if T MPDIR is not defined, gfortran falls back to other methods to determine the directory for temporary files as documented in the user manual. Fortran 2003 Support for unlimited polymorphic variables (CLASS(* )) has been added. Non-constant character lengths are not yet supported. T S 29113 Assumed types (T YPE(* )) are now supported. Experimental support for assumed-rank arrays (dim ension(..)) has been added. Note that at the moment, the gfortran array descriptor is used, which is different from the array descriptor defined in TS 29113. For more information, see the header file of gfortran or use the Chasm language interoperability tools. 4 .1.1.1.6. x86-specific Improvements New Instructions GCC 4.8 has added support for the Intel FXSR, XSAVE, and XSAVEOPT instructions. Corresponding intrinsics and built-in functions can now be enabled by using the -m fxsr, -m xsave, and -m xsaveopt command line options respectively. In addition, support for the RDSEED, ADCX, ADOX, and PREFET CHW instructions has been added and can be enabled by using the -m rdseed, -m adx, and -m prfchw command line options. 76 C hapter 4 . Compiling and Building New Built-in Functions to Detect Run-time CPU T ype and ISA A new built-in function, __builtin_cpu_is(), has been added to detect if the run-time CPU is of a particular type. T his function accepts one string literal argument with the CPU name, and returns a positive integer on a match and zero otherwise. For example, __builtin_cpu_is("westm ere") returns a positive integer if the run-time CPU is an Intel Core i7 Westmere processor. For a complete list of valid CPU names, see the user manual. A new built-in function, __builtin_cpu_supports(), has been added to detect if the run-time CPU supports a particular ISA feature. T his function accepts one string literal argument with the ISA feature, and returns a positive integer on a match and zero otherwise. For example, __builtin_cpu_supports("ssse3") returns a positive integer if the run-time CPU supports SSSE3 instructions. For a complete list of valid ISA names, see the user manual. Important If these built-in functions are called before any static constructors are invoked, such as IFUNC initialization, then the CPU detection initialization must be explicitly run using this newly provided built-in function, __builtin_cpu_init(). T he initialization needs to be done only once. For example, the following is sample invocation inside an IFUNC initializer: static void (*some_ifunc_resolver(void))(void) { __builtin_cpu_init(); if (__builtin_cpu_is("amdfam10h") ... if (__builtin_cpu_supports("popcnt") ... } Function Multiversioning Function multiversioning allows the programmer to specify multiple versions of the same function, each of which is specialized for a particular variant of a given target. At runtime, the appropriate version is automatically executed depending upon the target where the execution takes place. For example, consider the following code fragment: __attribute__ ((target ("default"))) int foo () { return 0; } __attribute__ ((target ("sse4.2"))) int foo () { return 1; } __attribute__ ((target ("arch=atom"))) int foo () { return 2; } When the function foo() is executed, the result returned depends upon the architecture where the program runs, not the architecture where the program was compiled. See the GCC Wiki for more details. New RT M and HLE Intrinsics Support for the Intel RT M and HLE intrinsics, built-in functions, and code generation has been added and can be enabled by using the -m rtm and -m hle command line options. T his is done via intrinsics for Restricted Transactional Memory (RT M) and extensions to the memory model for Hardware Lock Elision (HLE). For HLE, two new flags can be used to mark a lock as using hardware elision: __AT OMIC_HLE_ACQUIRE 77 Red Hat Enterprise Linux 7 Developer Guide Starts lock elision on a lock variable. T he memory model in use must be __AT OMIC_ACQUIRE or stronger. __AT OMIC_HLE_RELEASE Ends lock elision on a lock variable. T he memory model must be __AT OMIC_RELEASE or stronger. For example, consider the following code fragment: while (__atomic_exchange_n (& lockvar, 1, __ATOMIC_ACQUIRE | __ATOMIC_HLE_ACQUIRE)) _mm_pause (); // work with the acquired lock __atomic_clear (& lockvar, __ATOMIC_RELEASE | __ATOMIC_HLE_RELEASE); T he new intrinsics that support Restricted T ransactional Memory are: unsigned _xbegin (void) Attempts to start a transaction. If it succeeds, this function returns _XBEGIN_ST ART ED, otherwise it returns a status value indicating why the transaction could not be started. void _xend (void) Commits the current transaction. When no transaction is active, this function causes a fault. All memory side effects of the transactions become visible to other threads in an atomic manner. int _xtest (void) Returns a non-zero value if a transaction is currently active, or zero if it is not. void _xabort (unsigned char status) Aborts the current transaction. When no transaction is active, this is a no-op. T he parameter status is included in the return value of any _xbegin() call that is aborted by this function. T he following example illustrates the use of these intrinsics: if ((status = _xbegin ()) == _XBEGIN_STARTED) { // some code _xend (); } else { // examine the status to see why the transaction failed and possibly retry } T ransactions Using T ransactional Synchronization Extensions T ransactions in the transactional memory feature (the -fgnu-tm option) of GCC can now be run using Transactional Synchronization Extensions (T SX) if available on x86 hardware. Support for AMD Family 15h Processors T he x86 backend of GCC now supports CPUs based on AMD Family 15h cores with the 64-bit x86 78 C hapter 4 . Compiling and Building instruction set support. T his can be enabled by using the -m arch=bdver3 option. Support for AMD Family 16h Processors T he x86 backend of GCC now supports CPUs based on AMD Family 16h cores with the 64-bit x86 instruction set support. T his can be enabled by using the -m arch=btver2 option. 4 .1.1.2. Changes Since Red Hat Enterprise Linux 6.4 and 5.9 T he following features have been added since the release of GCC included in Red Hat Enterprise Linux 6.4 and 5.9: 4 .1.1.2.1. Status and Features 4 .1.1.2.1.1. C++11 GCC 4.7 and later provides experimental support for building applications compliant with C++11 using the -std=c++11 or -std=gnu++11 command line options. However, there is no guarantee for compatibility between C++11 code compiled by different versions of the compiler. Refer to Section 4.1.1.2.3.1, “C++ ABI” for details. T he C++ runtime library, libstdc++, supports a majority of the C++11 features. However, there is no or only partial support for some features such as certain properties on type traits or regular expressions. For details, refer to the libstdc++ documentation, which also lists implementation-defined behavior. Support for C++11 exception_ptr and future requires changes to the exception handling runtime in the system libstdc++ package. T hese changes will be distributed through the normal Z -stream channel. Application of all Red Hat Enterprise Linux errata may be required to see correct runtime functionality when using these features. 4 .1.1.2.1.2. C11 GCC 4.7 and later provides experimental support for some of the features from the C11 revision of the ISO C standard, and in addition to the previous (now deprecated) -std=c1x and -std=gnu1x command line options, gcc now accepts -std=c11 and -std=gnu11. Note that since this support is experimental, it may change incompatibly in future releases. Examples for features that are supported are Unicode strings (including the predefined macros __ST DC_UT F_16__ and __ST DC_UT F_32__), nonreturning functions (_Noreturn and <stdnoreturn.h>), and alignment support (_Alignas, _Alignof, m ax_align_t, and <stdalign.h>). 4 .1.1.2.1.3. Parallelism and Concurrency GCC 4 .7 and later provides improved support for programming parallel applications: 1. T he GCC compilers support the OpenMP API specification for parallel programming, version 3.1. Refer to the OpenMP website for more information about this specification. 2. T he C++11 and C11 standards provide programming abstractions for multi-threaded programs. T he respective standard libraries include programming abstractions for threads and thread-related features such as locks, condition variables, or futures. T hese new versions of the standard also define a memory model that precisely specifies the runtime behavior of a multi-threaded program, such as the guarantees provided by compilers and the constraints programmers have to pay attention to when writing multi-threaded programs. 79 Red Hat Enterprise Linux 7 Developer Guide Note that support for the memory model is still experimental (see below for details). For more information about the status of support for C++11 and C11, refer to Section 4.1.1.2.1.1, “C++11” and Section 4.1.1.2.1.2, “C11” respectively. T he rest of this section describes two new GCC features in more detail. Both these features make it easier for programmers to handle concurrency (such as when multiple threads do not run truly in parallel but instead have to synchronize concurrent access to shared state), and both provide atomicity for access to memory but differ in their scope, applicability, and complexity of runtime support. C++11 T ypes and GCC Built-ins for Atomic Memory Access C++11 has support for atomic types. Access to memory locations of this type is atomic, and appears as one indivisible access even when other threads access the same memory location concurrently. T he atomicity is limited to a single read or write access or one of the other atomic operations supported by such types (for example, two subsequent operations executed on a variable of atomic type are each atomic separately, but do not form one joint atomic operation). An atomic type is declared as atom ic<T>, where T is the non-atomic base type and must be trivially copyable (for example, atom ic<int> is an atomic integer). GCC does not yet support any base type T, but only those that can be accessed atomically with the atomic instructions offered by the target architecture. T his is not a significant limitation in practice, given that atomics are primarily designed to expose hardware primitives in an architecture-independent fashion; pointers and integrals that are not larger than a machine word on the target are supported as base types. Using base types that are not yet supported results in link-time errors. T he code generated for operations on atomic types, including the memory orders, implements the semantics specified in the C++11 standard. However, support for the C++11 memory model is still experimental, and for example GCC might not always preserve data-race freedom when optimizing code. GCC also supports new built-ins for atomic memory accesses, which follow the design of the memory model and new atomic operations. T he former set of synchronization built-ins (that is, those prefixed with __sync) are still supported. T ransactional Memory Transactional Memory (T M) allows programs to declare that a piece of code is supposed to execute as a transaction, that is, virtually atomically and in isolation from other transactions. GCC's transactional memory runtime library, libitm , then ensures this atomicity guarantee when executing the compiled program. Compared to atomic memory accesses, it is a higher-level programming abstraction, because it is not limited to single memory locations, does not require special data types for the data it modifies, and because transactions can contain arbitrary code and be nested within other transactions (with some restrictions explained subsequently). GCC implements transactions as specified in the Draft Specification for T ransactional Language Constructs for C++, version 1.1. T his draft does not yet specify the language constructs for C, but GCC already supports a C-compatible subset of the constructs when compiling C source code. T he main language constructs are transaction statements and expressions, and are declared by the __transaction_atom ic or __transaction_relaxed keywords followed by a compound statement or expression, respectively. T he following example illustrates how to increment a global variable y if another variable x has a value less than 10: __transaction_atomic { if (x < 10) y++; } T his happens atomically even in a multi-threaded execution of the program. In particular, even though the transaction can load x and y and store to y, all these memory accesses are virtually executed as one indivisible step. 80 C hapter 4 . Compiling and Building Note that in line with the C++11 memory model, programs that use transactions must be free of data races. T ransactions are guaranteed to be virtually executed serially in a global total order that is determined by the transactional memory implementation and that is consistent with and contributes to the happens-before order enforced by the rest of the program (that is, transaction semantics are specified based on the C++11 memory model, see the draft specification linked above). Nonetheless, if a program is not data-race-free, then it has undefined behavior. For example, a thread can first initialize some data and then make it publicly accessible by code like this: init(data); __transaction_atomic { data_public = true;} // data_public is initially false Another thread can then safely use the data, for instance: __transaction_atomic { if (data_public) use(data); } However, the following code has a data race and thus results in undefined behavior: __transaction_atomic { temp = copy(data); if (data_public) use(temp); } Here, copy(data) races with init(data) in the initializing thread, because this can be executed even if data_public is not true. Another example for data races is one thread accessing a variable x transactionally and another thread accessing it nontransactionally at potentially the same time. Note that the data can be safely reclaimed using code like this (assuming only one thread ever does this): __transaction_atomic { data_public = false; } destruct(data); Here, destruct() does not race with potential concurrent uses of the data because after the transaction finishes, it is guaranteed that data_public is false and thus data is private. See the specification and the C++11 memory model for more background information about this. Note that even if transactions are required to virtually execute in a total order, this does not mean that they execute mutually exclusive in time. T ransactional memory implementations attempt to run transactions as much in parallel as possible to provide scalable performance. T here are two variants of transactions: atomic transactions (__transaction_atom ic) and relaxed transactions (__transaction_relaxed). T he former guarantee atomicity with regard to all other code, but allow only code that is known to not include nontransactional kinds of synchronization, such as atomic or volatile memory access. In contrast, relaxed transactions allow all code (for example calls to I/O functions), but only provide atomicity with regard to other transactions. T herefore, atomic transactions can be nested within other atomic and relaxed transactions, but relaxed transactions can only be nested within other relaxed transactions. Furthermore, relaxed transactions are likely to be executed with less performance, but this depends on the implementation and available hardware. GCC verifies these restrictions statically at compile time (for example, the requirements on code allowed to be called from within atomic transactions). T his has implications for when transactions call functions that are defined within other compilation unit (source file) or within libraries. T o enable such cross-compilationunit calls for transactional code, the respective functions must be marked to contain code that is safe to use from within atomic transactions. Programmers can do so by adding the transaction_safe function attribute to the declarations of these functions and by including this declaration when defining the function. In turn, GCC then verifies that the code in these functions is safe for atomic transactions and generates code accordingly. If the programmer does not follow these constraints and/or steps, compile-time or linktime errors occur. Note that within a compilation unit, GCC detects automatically whether a function is safe for use within transactions, and the attributes therefore typically do not need to be added. See the draft specification linked above for further details. 81 Red Hat Enterprise Linux 7 Developer Guide GCC's transactional memory support is designed in such a way that it does not decrease the performance of programs that do not use transactions, nor the performance of nontransactional code, except due to the normal kinds of interference by concurrent threads that use the same resources such as the CPU. T ransactional memory support in GCC and libitm is still experimental, and both the ABI and API could change in the future if this is required due to the evolution of the specification of the language constructs, or due to implementation requirements. Note that when executing applications built with the -fgnu-tm command line option, it is currently a prerequisite to also have the appropriate version of the libitm .so.1 shared library installed. 4 .1.1.2.1.4 . Architecture-specific Options Red Hat Developer T oolset 2.0 is only available for Red Hat Enterprise Linux 5 and 6, both for the 32-bit and 64-bit Intel and AMD architectures. Consequently, the options described below are only relevant to these architectures. Optimization for several processors is now available through the command line options described in T able 4.5, “Processor Optimization Options”. T able 4 .5. Processor Optimization Options Option Description -m arch=core2 and -m tune=core2 Optimization for Intel Core 2 processors. -m arch=corei7 and -m tune=corei7 Optimization for Intel Core i3, i5, and i7 processors. -m arch=corei7-avx and -m tune=corei7avx Optimization for Intel Core i3, i5, and i7 processors with AVX. -m arch=core-avx-i Optimization for the Intel processor code-named Ivy Bridge with RDRND, FSGSBASE, and F16C. -m arch=core-avx2 Optimization for a next-generation processor from Intel with AVX2, FMA, BMI, BMI2, and LZ CNT . -m arch=bdver2 and -m tune=bdver2 Optimization for AMD Opteron processors codenamed Piledriver. -m arch=btver1 and -m tune=btver1 Optimization for AMD family 14 processors codenamed Bobcat. -m arch=bdver1 and -m tune=bdver1 Optimization for AMD family 15h processors codenamed Bulldozer. Support for various processor-specific intrinsics and instructions is now available through the command line options described in T able 4.6, “Support for Processor-specific Intrinsics and Instructions”. T able 4 .6. Support for Processor-specific Intrinsics and Instructions Option Description -m avx2 Support for Intel AVX2 intrinsics, built-in functions, and code generation. -m bm i2 Support for Intel BMI2 intrinsics, built-in functions, and code generation. -m lzcnt Implementation and automatic generation of __builtin_clz* using the lzcnt instruction. -m fm a Support for Intel FMA3 intrinsics and code generation. -m fsgsbase Enables the generation of new segment register read/write instructions through dedicated built-ins. -m rdrnd Support for the Intel rdrnd instruction. 82 C hapter 4 . Compiling and Building Option Description -m f16c Support for two additional AVX vector conversion instructions. -m tbm Support for T BM (T railing Bit Manipulation) built-in functions and code generation. -m bm i Support for AMD's BMI (Bit Manipulation) built-in functions and code generation. -m crc32 Support for crc32 intrinsics. -m m ovbe Enables the use of the m ovbe instruction to implement __builtin_bswap32 and __builtin_bswap64 . -m xop, -m fm a4 , and m lwp Support for the XOP, FMA4, and LWP instruction sets for the AMD Orochi processors. -m abm Enables the use of the popcnt and lzcnt instructions on AMD processors. -m popcnt Enables the use of the popcnt instruction on both AMD and Intel processors. When using the x87 floating-point unit, GCC now generates code that conforms to ISO C99 in terms of handling of floating-point excess precision. T his can be enabled by -fexcess-precision=standard and disabled by -fexcess-precision=fast. T his feature is enabled by default when using standards conformance options such as -std=c99. Vectors of type vector long long or vector long are passed and returned using the same method as other vectors with the VSX instruction set. Previously GCC did not adhere to the ABI for 128-bit vectors with 64-bit integer base types (see GCC PR 48857). T he -m recip command line option has been added, which indicates whether the reciprocal and reciprocal square root instructions should be used. T he -m veclibabi=m ass command line option has been added. T his can be used to enable the compiler to auto-vectorize mathematical functions using the Mathematical Acceleration Subsystem library. T he -m single-pic-base command line option has been added, which instructs the compiler to avoid loading the PIC base register in function prologues. T he PIC base register must be initialized by the runtime system. T he -m block-m ove-inline-lim it command line option has been added, which enables the user to control the maximum size of inlined m em cpy calls and similar. 4 .1.1.2.1.5. Link-time Optimization Link-time optimization (LT O) is a compilation technique in which GCC generates an internal representation of each compiled input file in addition to the native code, and writes both to the output object file. Subsequently, when several object files are linked together, GCC uses the internal representations of the compiled code to optimize inter-procedurally across all the compilation units. T his can potentially improve the performance of the generated code (for example, functions defined in one file can potentially be inlined when called in another file). T o enable LT O, the -flto option needs to be specified at both compile time and link time. For further details, including interoperability with linkers and parallel execution of LT O, refer to the documentation for flto in the GCC 4.7.0 Manual. Also note that the internal representation is not a stable interface, so LT O will only apply to code generated by the same version of GCC. 83 Red Hat Enterprise Linux 7 Developer Guide Note Use of Link-time Optimization with debug generation is not yet supported in gcc 4.7 and 4.8 and so use of the -flto and the -g options together is unsupported in Red Hat Developer T oolset. 4 .1.1.2.1.6. Miscellaneous -Ofast is now supported as a general optimization level. It operates similar to -O3, adds options that can yield better-optimized code, but in turn might invalidate standards compliance (for example, -ffast-m ath is enabled by -Ofast). GCC can now inform users about cases in which code generation might be improved by adding attributes such as const, pure, and noreturn to functions declared in header files. Use the -Wsuggestattribute=[const|pure|noreturn] command line option to enable this. Assembler code can now make use of a goto feature that allows for jumps to labels in C code. 4 .1.1.2.2. Language Compatibility In this section, we describe the compatibility between the Red Hat Developer T oolset compilers and the Red Hat Enterprise Linux system compilers at the programming-language level (for example, differences in the implementation of language standards such as C99, or changes to the warnings generated by -Wall). Some of the changes are a result of bug fixing, and some old behaviors have been intentionally changed in order to support new standards, or relaxed in standards-conforming ways to facilitate compilation or runtime performance. Some of these changes are not visible to the naked eye and will not cause problems when updating from older versions. However, some of these changes are visible, and can cause grief to users porting to Red Hat Developer T oolset's version of GCC. T he following text attempts to identify major issues and suggests solutions. 4 .1.1.2.2.1. C Constant expressions are now handled by GCC in a way that conforms to C90 and C99. For code expressions that can be transformed into constants by the compiler but are in fact not constant expressions as defined by ISO C, this may cause warnings or errors. Ill-formed redeclarations of library functions are no longer accepted by the compiler. In particular, a function with a signature similar to the built-in declaration of a library function (for example, abort() or m em cpy()) must be declared with extern "C" to be considered as a redeclaration, otherwise it is illformed. Duplicate Member Consider the following struct declaration: struct A { int *a; union { struct { int *a; }; }; }; Previously, this declaration used to be diagnosed just by the C++ compiler, now it is also diagnosed by the C compiler. Because of the anonymous unions and structs, there is ambiguity about what .a actually refers to and one of the fields therefore needs to be renamed. 4 .1.1.2.2.2. C++ Header Dependency Changes 84 C hapter 4 . Compiling and Building <iostream >, <string>, and other ST L headers that previously included <unistd.h> as an implementation detail (to get some feature macros for gthr* .h purposes) no longer do so, because it was a C++ standard violation. T his can result in diagnostic output similar to the following: error: ‘truncate’ was not declared in this scope error: ‘sleep’ was not declared in this scope error: ‘pipe’ was not declared in this scope error: there are no arguments to 'offsetof' that depend on a template parameter, so a declaration of 'offsetof' must be available T o fix this, add the following line early in the source or header files that need it: #include <unistd.h> Many of the standard C++ library include files have been edited to no longer include <cstddef> to get namespace-std-scoped versions of size_t and ptrdiff_t. As such, C++ programs that used the macros NULL or offsetof without including <cstddef> will no longer compile. T he diagnostic produced is similar to the following: error: 'ptrdiff_t' does not name a type error: 'size_t' has not been declared error: 'NULL' was not declared in this scope error: there are no arguments to 'offsetof' that depend on a template parameter, so a declaration of 'offsetof' must be available T o fix this issue, add the following line: #include <cstddef> Name Lookup Changes G++ no longer performs an extra unqualified lookup that it incorrectly performed in the past. Instead, it implements the two-phase lookup rules correctly, and an unqualified name used in a template must have an appropriate declaration that: 1. is either in scope at the point of the template's definition, or 2. can be found by argument-dependent lookup at the point of instantiation. Code that incorrectly depends on a second unqualified lookup at the point of instantiation (such as finding functions declared after the template or in dependent bases) will result in compile-time errors. In some cases, the diagnostics provided by G++ include hints how to fix the bugs. Consider the following code: template<typename T> int t(T i) { return f(i); } int f(int i) { return i; } 85 Red Hat Enterprise Linux 7 Developer Guide int main() { return t(1); } T he following diagnostics output will be produced: In instantiation of ‘int t(T) [with T = int]’ required from here error: ‘f’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive] note: ‘int f(int)’ declared here, later in the translation unit T o correct the error in this example, move the declaration of function f() before the definition of template function t(). T he -fperm issive compiler flag turns compile-time errors into warnings and can be used as a temporary workaround. Uninitialized const Consider the following declaration: struct A { int a; A (); }; struct B : public A { }; const B b; An attempt to compile this code now fails with the following error: error: uninitialized const ‘b’ [-fpermissive] note: ‘const struct B’ has no user-provided default constructor T his happens, because B does not have a user-provided default constructor. Either an initializer needs to be provided, or the default constructor needs to be added. Visibility of T emplate Instantiations T he ELF symbol visibility of a template instantiation is now properly constrained by the visibility of its template arguments. For instance, users that instantiate standard library components like std::vector with hidden user defined types such as struct m y_hidden_struct can now expect hidden visibility for std::vector<m y_hidden_struct> symbols. As a result, users that compile with the fvisibility=hidden command line option should be aware of the visibility of types included from the library headers used. If the header does not explicitly control symbol visibility, types from those headers will be hidden, along with instantiations that use those types. For instance, consider the following code: #include <vector> // template std::vector has default visibility #include <ctime> // struct tm has hidden visibility template class std::vector<tm>; // instantiation has hidden visibility One approach to adjusting the visibility of a library header <foo.h> is to create a forwarding header on the -I include path consisting of the following: #pragma GCC visibility push(default) #include_next <foo.h> #pragma GCC visibility push User-defined Literal Support 86 C hapter 4 . Compiling and Building When compiling C++ with the -std={c++11,c++0x,gnu++11,gnu++0x} command line option, GCC 4.7.0 and later, unlike older versions, supports user-defined literals, which are incompatible with some valid ISO C++03 code. In particular, white space is now needed after a string literal before something that could be a valid user defined literal. Consider the following code: const char *p = "foobar"__TIME__; In C++03, the __T IME__ macro expands to some string literal and is concatenated with the other one. In C++11, __T IME__ is not expanded and instead, operator "" __T IME__ is being looked up, which results in a warning like: error: unable to find string literal operator ‘operator"" __TIME__’ T his applies to any string literal followed without white space by some macro. T o fix this, add some white space between the string literal and the macro name. T aking the Address of T emporary Consider the following code: struct S { S (); int i; }; void bar (S *); void foo () { bar (&S ()); } Previously, an attempt to compile this code produced a warning message, now it fails with an error. T his can be fixed by adding a variable and passing the address of this variable instead of the temporary. T he fperm issive compiler flag turns compile-time errors into warnings and can be used as a temporary workaround. Miscellaneous G++ now sets the predefined macro __cplusplus to the correct value: 199711L for C++98/03, and 201103L for C++11. G++ now properly re-uses stack space allocated for temporary objects when their lifetime ends, which can significantly lower stack consumption for some C++ functions. As a result of this, some code with undefined behavior will now break. When an extern declaration within a function does not match a declaration in the enclosing context, G++ now properly declares the name within the namespace of the function rather than the namespace which was open just before the function definition. G++ now implements the proposed resolution of the C++ standard's core issue 253. Default initialization is allowed if it initializes all subobjects, and code that fails to compile can be fixed by providing an initializer such as: struct A { A(); }; struct B : A { int i; }; const B b = B(); Access control is now applied to typedef names used in a template, which may cause G++ to reject some ill-formed code that was accepted by earlier releases. T he -fno-access-control option can be used as a temporary workaround until the code is corrected. 87 Red Hat Enterprise Linux 7 Developer Guide G++ now implements the C++ standard's core issue 176. Previously, G++ did not support using the injected-class-name of a template base class as a type name, and lookup of the name found the declaration of the template in the enclosing scope. Now lookup of the name finds the injected-class-name, which can be used either as a type or as a template, depending on whether or not the name is followed by a template argument list. As a result of this change, some code that was previously accepted may be illformed, because: 1. the injected-class-name is not accessible because it is from a private base, or 2. the injected-class-name cannot be used as an argument for a template parameter. In either of these cases, the code can be fixed by adding a nested-name-specifier to explicitly name the template. T he first can be worked around with -fno-access-control, the second is only rejected with -pedantic. 4 .1.1.2.2.3. C/C++ Warnings GCC 4.7.0 and later adds a number of new warnings that are either enabled by default, or by using the Wall option. Although these warnings do not result in a compilation failure on their own, often -Wall is used in conjunction with -Werror, causing these warnings to act like errors. T his section provides a list of these new or newly enabled warnings. Unless noted otherwise, these warnings apply to both C and C++. T he behavior of the -Wall command line option has changed and now includes the new warning flags Wunused-but-set-variable and, with -Wall -Wextra, -Wunused-but-set-param eter. T his may result in new warnings in code that compiled cleanly with previous versions of GCC. For example, consider the following code: void fn (void) { int foo; foo = bar (); } /* foo is never used. */ T he following diagnostic output will be produced: warning: variable "foo" set but not used [-Wunused-but-set-variable] T o fix this issue, first see if the unused variable or parameter can be removed without changing the result or logic of the surrounding code. If not, annotate it with __attribute__((__unused__)). As a workaround, you can use the -Wno-error=unused-but-set-variable or -Wno-error=unusedbut-set-param eter command line option. T he -Wenum -com pare option causes GCC to report a warning when values of different enum types are being compared. Previously, this option only worked for C++ programs, but now it works for C as well. T his warning is enabled by -Wall and may be avoided by using a type cast. Casting integers to larger pointer types now causes GCC to display a warning by default. T o disable these warnings, use the -Wno-int-to-pointer-cast option, which is available for both C and C++. Conversions between NULL and non-pointer types now cause GCC to report a warning by default. Previously, these warnings were only displayed when explicitly using -Wconversion. T o disable these warnings, use the new -Wno-conversion-null command line option. 88 C hapter 4 . Compiling and Building GCC can now warn when a class that has virtual functions and a non-virtual destructor is destroyed by using delete. T his is unsafe to do because the pointer might refer to a base class that does not have a virtual destructor. T he warning is enabled by -Wall and by a new command line option, -Wdelete-nonvirtual-dtor. New -Wc++11-com pat and -Wc++0x-com pat options are now available. T hese options cause GCC to display a warning about C++ constructs whose meaning differs between ISO C++ 1998 and ISO C++ 2011 (such as identifiers in ISO C++ 1998 that are keywords in ISO C++ 2011). T his warning is enabled by -Wall and enables the -Wnarrowing option. 4 .1.1.2.2.4 . Fortran 4 .1.1.2.2.4 .1. New Features A new compile flag -fstack-arrays has been added. T his flag causes all local arrays to be put on stack memory, which can significantly improve the performance of some programs. Note that programs that use very large local arrays may require you to extend your runtime limits for stack memory. Compile time has been significantly improved. For example, the improvement may be noticeable when working with programs that use large array constructors. T o improve code generation and diagnostics, the -fwhole-file compile flag is now enabled by default, and can be used with a newly supported -fwhole-program flag. T o disable it, use the deprecated -fno-whole-file flag. A new command line option -M is now supported. Similarly to gcc, this option allows you to generate Makefile dependencies. Note that the -cpp option may be required as well. T he -finit-real= command line option now supports snan as a valid value. T his allows you to initialize REAL and COMPLEX variables with a signaling NaN (not a number), and requires you to enable trapping (for example, by using the -ffpe-trap= command line option). Note that compile-time optimizations may turn a signaling NaN into a quiet NaN. A new command line option -fcheck= has been added. T his option accepts the following arguments: T he -fcheck=bounds option is equivalent to the -fbounds-check command line option. T he -fcheck=array-tem ps option is equivalent to the -fcheck-array-tem poraries command line option. T he -fcheck=do option checks for invalid modification of loop iteration variables. T he -fcheck=recursive option checks for recursive calls to subroutines or functions that are not marked as recursive. T he -fcheck=pointer option performs pointer association checks in calls, but does not handle undefined pointers nor pointers in expressions. T he -fcheck=all option enables all of the above options. A new command line option -fno-protect-parens has been added. T his option allows the compiler to reorder REAL and COMPLEX expressions with no regard to parentheses. When OpenMP's WORKSHARE is used, array assignments and WHERE will now be run in parallel. More Fortran 2003 and Fortran 2008 mathematical functions can now be used as initialization expressions. 89 Red Hat Enterprise Linux 7 Developer Guide T he GCC$ compiler directive now enables support for some extended attributes such as ST DCALL. 4 .1.1.2.2.4 .2. Compatibility Changes T he -Ofast command line option now automatically enables the -fno-protect-parens and fstack-arrays flags. Front-end optimizations can now be disabled by the -fno-frontend-optim ize option, and selected by the -ffrontend-optim ize option. T he former is essentially only desirable if invalid Fortran source code needs to be compiled (for example, when functions—as compared to subroutines —have side-effects) or to work around compiler bugs. T he GFORT RAN_USE_ST DERR environment variable has been removed, and GNU Fortran now always prints error messages to standard error. T he -fdum p-core command line option and the GFORT RAN_ERROR_DUMPCORE environment variable have been removed. When encountering a serious error, GNU Fortran now always aborts the execution of the program. T he -fbacktrace command line option is now enabled by default. When a fatal error occurs, GNU Fortran now attempts to print a backtrace to standard error before aborting the execution of the program. T o disable this behavior, use the -fno-backtrace option. GNU Fortran no longer supports the use of the -M command line option to generate Makefile dependencies for the module path. T o perform this operation, use the -J option instead. T o significantly reduce the number of warnings, the -Wconversion command line option now only displays warnings when a conversion leads to information loss, and a new command line option Wconversion-extra has been added to display warnings about other conversions. T he Wconversion option is now enabled with -Wall. A new command line option -Wunused-dum m y-argum ent has been added. T his option can be used to display warnings about unused dummy arguments, and is now enabled with -Wall. Note that the Wunused-variable option previously also warned about unused dummy arguments. T he COMMON default padding has been changed. Previously, the padding was added before a variable. Now it is added after a variable to increase the compatibility with other vendors, as well as to help to obtain the correct output in some cases. Note that this behavior is in contrast with the behavior of the falign-com m ons option. GNU Fortran no longer links against the libgfortranbegin library. T he MAIN__ assembler symbol is the actual Fortran main program and is invoked by the m ain function, which is now generated and put in the same object file as MAIN__. Note that the libgfortranbegin library is still present for backward compatibility. 4 .1.1.2.2.4 .3. Fortran 2003 Features Improved but still experimental support for polymorphism between libraries and programs and for complicated inheritance patterns. Generic interface names which have the same name as derived types are now supported, which allows the creation of constructor functions. Note that Fortran does not support static constructor functions; only default initialization or an explicit structure-constructor initialization are available. 90 C hapter 4 . Compiling and Building Automatic (re)allocation: In intrinsic assignments to allocatable variables, the left-hand side will be automatically allocated (if unallocated) or reallocated (if the shape or type parameter is different). T o avoid the small performance penalty, you can use a(:) = ... instead of a = ... for arrays and character strings — or disable the feature using -std=f95 or -fno-realloc-lhs. Experimental support of the ASSOCIAT E construct has been added. In pointer assignments it is now possible to specify the lower bounds of the pointer and, for a rank-1 or a simply contiguous data-target, to remap the bounds. Deferred type parameter: For scalar allocatable and pointer variables the character length can now be deferred. Namelist variables with allocatable attribute, pointer attribute, and with a non-constant length type parameter are now supported. Support has been added for procedure-pointer function results and procedure-pointer components (including PASS). Support has been added for allocatable scalars (experimental), DEFERRED type-bound procedures, and the ERRMSG= argument of the ALLOCAT E and DEALLOCAT E statements. T he ALLOCAT E statement now supports type-specs and the SOURCE= argument. Rounding (ROUND=, RZ, ...) for output is now supported. T he INT _FAST {8,16,32,64 ,128}_T format for ISO_C_BINDING intrinsic module type parameters is now supported. OPERAT OR(* ) and ASSIGNMENT (=) are now allowed as GENERIC type-bound procedures (i.e. as type-bound operators). 4 .1.1.2.2.4 .4 . Fortran 2003 Compatibility Extensible derived types with type-bound procedure or procedure pointer with PASS attribute now have to use CLASS in line with the Fortran 2003 standard; the workaround to use T YPE is no longer supported. 4 .1.1.2.2.4 .5. Fortran 2008 Features A new command line option -std=f2008ts has been added. T his option enables support for programs that conform to the Fortran 2008 standard and the draft T echnical Specification (T S) 29113 on Further Interoperability of Fortran with C. For more information, refer to the Chart of Fortran T S 29113 Features supported by GNU Fortran. T he DO CONCURRENT construct is now supported. T his construct can be used to specify that individual loop iterations do not have any interdependencies. Full single-image support except for polymorphic coarrays has been added, and can be enabled by using the -fcoarray=single command line option. Additionally, GNU Fortran now provides preliminary support for multiple images via an MPI-based coarray communication library. Note that the library version is not yet usable as remote coarray access is not yet possible. T he ST OP and ERROR ST OP statements have been updated to support all constant expressions. T he CONT IGUOUS attribute is now supported. Use of ALLOCAT E with the MOLD argument is now supported. 91 Red Hat Enterprise Linux 7 Developer Guide T he ST ORAGE_SIZE intrinsic inquiry function is now supported. T he NORM2 and PARIT Y intrinsic functions are now supported. T he following bit intrinsics have been added: the POPCNT and POPPAR bit intrinsics for counting the number of 1 bits and returning the parity; the BGE, BGT , BLE, and BLT bit intrinsics for bitwise comparisons; the DSHIFT L and DSHIFT R bit intrinsics for combined left and right shifts; the MASKL and MASKR bit intrinsics for simple left and right justified masks; the MERGE_BIT S bit intrinsic for a bitwise merge using a mask; the SHIFT A, SHIFT L, and SHIFT R bit intrinsics for shift operations; the transformational bit intrinsics IALL, IANY, and IPARIT Y. T he EXECUT E_COMMAND_LINE intrinsic subroutine is now supported. T he IMPURE attribute for procedures is now supported. T his allows the use of ELEMENT AL procedures without the restrictions of PURE. Null pointers (including NULL()) and unallocated variables can now be used as an actual argument to optional non-pointer, non-allocatable dummy arguments, denoting an absent argument. Non-pointer variables with the T ARGET attribute can now be used as an actual argument to POINT ER dummies with INT ENT (IN). Pointers that include procedure pointers and those in a derived type (pointer components) can now also be initialized by a target instead of only by NULL. T he EXIT statement (with construct-name) can now be used to leave the ASSOCIAT E, BLOCK, IF, SELECT CASE, and SELECT T YPE constructs in addition to DO. Internal procedures can now be used as actual arguments. T he named constants INT EGER_KINDS, LOGICAL_KINDS, REAL_KINDS, and CHARACT ER_KINDS of the intrinsic module ISO_FORT RAN_ENV have been added. T hese arrays contain the supported 'kind' values for the respective types. T he C_SIZEOF module procedures of the ISO_C_BINDINGS intrinsic module and the COMPILER_VERSION and COMPILER_OPT IONS module procedures of the ISO_FORT RAN_ENV intrinsic module have been implemented. T he OPEN statement now supports the NEWUNIT = option. T his option returns a unique file unit and therefore prevents inadvertent use of the same unit in different parts of the program. Unlimited format items are now supported. T he INT {8,16,32} and REAL{32,64 ,128} format for ISO_FORT RAN_ENV intrinsic module type parameters are now supported. It is now possible to use complex arguments with the T AN, SINH, COSH, T ANH, ASIN, ACOS, and AT AN functions. Additionally, the new functions ASINH, ACOSH, and AT ANH have been added for real and complex arguments, and AT AN(Y,X) now serves as an alias for AT AN2(Y,X). 92 C hapter 4 . Compiling and Building T he BLOCK construct has been implemented. 4 .1.1.2.2.4 .6. Fortran 2008 Compatibility T he implementation of the ASYNCHRONOUS attribute in GCC is now compatible with the candidate draft of TS 29113: Technical Specification on Further Interoperability with C. 4 .1.1.2.2.4 .7. Fortran 77 Compatibility When the GNU Fortran compiler is issued with the -fno-sign-zero option, the SIGN intrinsic now behaves as if zero were always positive. 4 .1.1.2.3. ABI Compatibility T his section describes compatibility between the Red Hat Developer T oolset compilers and the system compilers at the application binary interface (ABI) level. 4 .1.1.2.3.1. C++ ABI Because the upstream GCC community development does not guarantee C++11 ABI compatibility across major versions of GCC, the same applies to use of C++11 with Red Hat Developer T oolset. Consequently, using the -std=c++11 option is supported in Red Hat Developer T oolset 2.0 only when all C++ objects compiled with that flag have been built using the same major version of Red Hat Developer T oolset. T he mixing of objects, binaries and libraries, built by the Red Hat Enterprise Linux 5 or 6 system toolchain GCC using the -std=c++0x or -std=gnu++0x flags, with those built with the -std=c++11 or std=gnu++11 flags using the GCC in Red Hat Developer T oolset is explicitly not supported. As later major versions of Red Hat Developer T oolset may use a later major release of GCC, forwardcompatibility of objects, binaries, and libraries built with the -std=c++11 or -std=gnu++11 options cannot be guaranteed, and so is not supported. T he default language standard setting for Red Hat Developer T oolset is C++98. Any C++98-compliant binaries or libraries built in this default mode (or explicitly with -std=c++98) can be freely mixed with binaries and shared libraries built by the Red Hat Enterprise Linux 5 or 6 system toolchain GCC. Red Hat recommends use of this default -std=c++98 mode for production software development. Important Use of C++11 features in your application requires careful consideration of the above ABI compatibility information. Aside from the C++11 ABI, discussed above, the Red Hat Enterprise Linux Application Compatibility Specification is unchanged for Red Hat Developer T oolset. When mixing objects built with Red Hat Developer T oolset with those built with the Red Hat Enterprise Linux v5.x/v6.x toolchain (particularly .o/.a files), the Red Hat Developer T oolset toolchain should be used for any linkage. T his ensures any newer library features provided only by Red Hat Developer T oolset are resolved at link-time. A new standard mangling for SIMD vector types has been added to avoid name clashes on systems with vectors of varying length. By default the compiler still uses the old mangling, but emits aliases with the new mangling on targets that support strong aliases. -Wabi will now display a warning about code that uses the old mangling. 4 .1.1.2.3.2. Miscellaneous 93 Red Hat Enterprise Linux 7 Developer Guide GCC now optimizes calls to various standard C string functions such as strlen(), strchr(), strcpy(), strcat() and stpcpy() (as well as their respective _FORT IFY_SOURCE variants) by transforming them into custom, faster code. T his means that there might be fewer or other calls to those functions than in the original source code. T he optimization is enabled by default at -O2 or higher optimization levels. It is disabled when using -fno-optim ize-strlen or when optimizing for size. When compiling for 32-bit GNU/Linux and not optimizing for size, -fom it-fram e-pointer is now enabled by default. T he prior default setting can be chosen by using the -fno-om it-fram e-pointer command line option. Floating-point calculations on x86 targets and in strict C99 mode are now compiled by GCC with a stricter standard conformance. T his might result in those calculations executing significantly slower. It can be disabled using -fexcess-precision=fast. 4 .1.1.2.4 . Debugging Compatibility GCC now generates DWARF debugging information that uses more or newer DWARF features than previously. GDB contained in Red Hat Developer T oolset can handle these features, but versions of GDB older than 7.0 cannot. GCC can be restricted to only generate debugging information with older DWARF features by using the -gdwarf-2 -gstrict-dwarf or -gdwarf-3 -gstrict-dwarf options (the latter are handled partially by versions of GDB older than 7.0). Many tools such as Valgrind, SystemT ap, or third-party debuggers utilize debugging information. It is suggested to use the -gdwarf-2 -gstrict-dwarf options with those tools. Note Use of Link-time Optimization with debug generation is not yet supported in gcc 4.7 and 4.8 and so use of the -flto and the -g options together is unsupported in Red Hat Developer T oolset. 4 .1.1.2.5. Other Compatibility GCC is now more strict when parsing command line options, and both gcc and g++ report an error when invalid command line options are used. In particular, when only linking and not compiling code, earlier versions of GCC ignored all options starting with --. For example, options accepted by the linker such as -as-needed and --export-dynam ic are not accepted by gcc and g++ anymore, and should now be directed to the linker using -Wl,--as-needed or -Wl,--export-dynam ic if that is intended. Because of the new link-time optimization feature (see Section 4.1.1.2.1.5, “Link-time Optimization”), support for the older intermodule optimization framework has been removed and the -com bine command line option is not accepted anymore. 4.2. Distributed Compiling Red Hat Enterprise Linux also supports distributed compiling. T his involves transforming one compile job into many smaller jobs; these jobs are distributed over a cluster of machines, which speeds up build time (particularly for programs with large codebases). T he distcc package provides this capability. T o set up distributed compiling, install the following packages: distcc distcc-server 94 C hapter 4 . Compiling and Building For more information about distributed compiling, refer to the m an pages for distcc and distccd. T he following link also provides detailed information about the development of distcc: http://code.google.com/p/distcc 4.3. Autotools GNU Autotools is a suite of command line tools that allow developers to build applications on different systems, regardless of the installed packages or even Linux distribution. T hese tools aid developers in creating a configure script. T his script runs prior to builds and creates the top-level Makefiles required to build the application. T he configure script may perform tests on the current system, create additional files, or run other directives as per parameters provided by the builder. T he Autotools suite's most commonly-used tools are: autoconf Generates the configure script from an input file (configure.ac, for example) automake Creates the Makefile for a project on a specific system autoscan Generates a preliminary input file (that is, configure.scan), which can be edited to create a final configure.ac to be used by autoconf All tools in the Autotools suite are part of the Developm ent T ools group package. You can install this package group to install the entire Autotools suite, or use yum to install any tools in the suite as you wish. 4.3.1. Autotools Plug-in for Eclipse T he Autotools suite is also integrated into the Eclipse IDE via the Autotools plug-in. T his plug-in provides an Eclipse graphical user interface for Autotools, which is suitable for most C/C++ projects. As of Red Hat Enterprise Linux 6, this plug-in only supports two templates for new C/C++ projects: An empty project A "hello world" application T he empty project template is used when importing projects into the C/C++ Development T oolkit that already support Autotools. Future updates to the Autotools plug-in will include additional graphical user interfaces (wizards, for example) for creating shared libraries and other complex scenarios. T he Red Hat Enterprise Linux 6 version of the Autotools plug-in also does not integrate git or m ercurial into Eclipse. As such, Autotools projects that use git repositories will be required to be checked out outside the Eclipse workspace. Afterwards, you can specify the source location for such projects in Eclipse. Any repository manipulation (commits, or updates for example) are done via the command line. 4.3.2. Configuration Script 95 Red Hat Enterprise Linux 7 Developer Guide T he most crucial function of Autotools is the creation of the configure script. T his script tests systems for tools, input files, and other features it can use in order to build the project [2] . T he configure script generates a Makefile which allows the m ake tool to build the project based on the system configuration. T o create the configure script, first create an input file. T hen feed it to an Autotools utility in order to create the configure script. T his input file is typically configure.ac or Makefile.am ; the former is usually processed by autoconf, while the later is fed to autom ake. If a Makefile.am input file is available, the autom ake utility creates a Makefile template (that is, Makefile. in), which may refer to information collected at configuration time. For example, the Makefile may have to link to a particular library if and only if that library is already installed. When the configure script runs, autom ake will use the Makefile. in templates to create a Makefile. If a configure.ac file is available instead, then autoconf will automatically create the configure script based on the macros invoked by configure.ac. T o create a preliminary configure.ac, use the autoscan utility and edit the file accordingly. 4.3.3. Autotools Documentation Red Hat Enterprise Linux includes m an pages for autoconf, autom ake, autoscan and most tools included in the Autotools suite. In addition, the Autotools community provides extensive documentation on autoconf and autom ake on the following websites: http://www.gnu.org/software/autoconf/manual/autoconf.html http://www.gnu.org/software/autoconf/manual/automake.html T he following is an online book describing the use of Autotools. Although the above online documentation is the recommended and most up to date information on Autotools, this book is a good alternative and introduction. http://sourceware.org/autobook/ For information on how to create Autotools input files, refer to: http://www.gnu.org/software/autoconf/manual/autoconf.html#Making-configure-Scripts http://www.gnu.org/software/autoconf/manual/automake.html#Invoking-Automake T he following upstream example also illustrates the use of Autotools in a simple hello program: http://www.gnu.org/software/hello/manual/hello.html 4.4. Eclipse Built-in Specfile Editor T he Specfile Editor Plug-in for Eclipse provides useful features to help developers manage .spec files. T his plug-in allows users to leverage several Eclipse GUI features in editing .spec files, such as autocompletion, highlighting, file hyperlinks, and folding. In addition, the Specfile Editor Plug-in also integrates the rpm lint tool into the Eclipse interface. rpm lint is a command line tool that helps developers detect common RPM package errors. T he richer visualization offered by the Eclipse interface helps developers quickly detect, view, and correct mistakes reported by rpm lint. 96 C hapter 4 . Compiling and Building T he Specfile Editor for Eclipse is provided by the eclipse-rpm -editor package. For more information about this plug-in, refer to Specfile Editor User Guide in the Eclipse Help Contents. 4.5. CDT in Eclipse T he CDT (C/C++ Development T ools) is an Eclipse project that adds support for developing C and C++ projects with Eclipse. A user can create three forms of projects: 1. Managed Make Project 2. Standard Make Project 3. Autotools Project 4.5.1. Managed Make Project A managed make CDT project, sometimes referred to as a managed project, is one where the details regarding how to build the project are automated on behalf of the end-user. T his differs from the standard make project, another common type of CDT C/C++ project, whereby a user supplies a Makefile that has the build details specified. For a managed project, start by selecting the type of managed project and the required toolchain. T he project type is categorized based on the ultimate target of the project, such as an executable, a shared library, or a static library. Within these categories there may be templates for more specific projects (a hello world sample executable project, for example) where base source files are already provided. T hese can then be further customized. A toolchain is the set of tools used to generate the target. T ypically, a Red Hat Enterprise Linux C/C++ developer would select the Linux GCC toolchain, which uses GCC for compiling, linking and assembly. Each tool in the toolchain is associated with one or more input types, typically specified by file suffix (for example, .c or .h or .S) or by file name. T he tool will have parameter settings which can be customized by the developer, and each tool has an output type it creates. T he tool also has a command or binary executable associated with it which may overlap among multiple tools. T he C compiler and linker, for example, can both use GCC, but the compiler and linker tools will each have different input and output types, as well as different settings presented to the developer. Customize the tool settings through Properties > C/C++ Build > Settings. T he toolchain itself can be customized in order to add, remove, or replace the used tools through Properties > C/C++ Build > T oolchain Editor. New files, such as source files or header files, can be added to the project once it has been created. T he new files are added automatically to the build based on their input types and the tool settings. Navigate to Project > C/C++ Build under the Builder Settings tab in order for the managed make project to generate a Makefile which can be distributed with the project. T his facilitates the use of the Makefile outside Eclipse. For more information regarding managed make C/C++ projects, refer to the C/C++ Development User Guide which can be found by navigating to Concepts > Project T ypes, T asks > Creating a Project, or Reference > C/C++ Properties > C/C++ Project Properties > C/C++ Build > Settings Page. 4.5.2. Standard Make Project A standard make CDT project is a traditional C project with a Makefile that is manually managed by the developer. Unlike the managed make project, there are no tool settings to be used in determining rules in the Makefile. Manual additions to the Makefile are required when new source files that are to be processed as part of the build are added to the project. If a pattern rule exists which the new file name matches (for example, .c:.o, which states how to process a file with the suffix .c into a file with the suffix .o), then this is not required. 97 Red Hat Enterprise Linux 7 Developer Guide T he default make target for building the project is all, and the default make target for cleaning the project is clean. It is also possible for a user to build other targets found in the Makefile. T o do this use the Makefile T arget dialog to create targets to run or build existing ones. Creating pseudo-targets that group multiple targets found in the makefile in a particular order is also done through the Makefile T arget dialog. T o access the specific create and build dialogs, select Project > Make T arget > Create... and Project > Make T arget > Build... respectively. Alternatively, right click on resources in the project and select the Make T argets option to access either Create... or Build... For more information regarding standard make C/C++ projects, refer to the C/C++ Development user guide, accessed through Concepts > Project T ypes, T asks > Creating a project or Reference > C/C++ Properties > C/C++ Project Properties > C/C++Build > Settings Page. 4.5.3. Autotools Project An autotools project is a lot like a standard make project however the Makefile is usually generated as part of a configuration step that occurs prior to building. See Section 4.3, “Autotools” for details on Autotools and the Autotools plug-in for Eclipse which adds support for this type of project. Like a standard make project, make targets can be run with the Make T arget dialog. 4.6. build-id Unique Identification of Binaries Each executable or shared library built with Red Hat Enterprise Linux Server 6 or later is assigned a unique identification 160-bit SHA-1 string, generated as a checksum of selected parts of the binary. T his allows two builds of the same program on the same host to always produce consistent build-ids and binary content. Display the build-id of a binary with the following command: $ eu-readelf -n usr/bin/bash [...] Note section [ 3] '.note.gnu.build-id' of 36 bytes at offset 0x274: Owner Data size Type GNU 20 GNU_BUILD_ID Build ID: efdd0b5e69b0742fa5e5bad0771df4d1df2459d1 Unique identificators of binaries are useful in cases such as analysing core files, documented Section 5.2.1, “Installing Debuginfo Packages for Core Files Analysis”. 4.7. Software Collections and scl-utils With Software Collections, it is possible to build and concurrently install multiple versions of the same RPM packages on a system. Software Collections have no impact on the system versions of the packages installed by the conventional RPM package manager. T o enable support for Software Collections on a system, install the packages scl-utils and scl-utils-build by typing the following at a shell prompt: # yum install -y scl-utils scl-utils-build T he scl-utils package provides the scl tool which is used to enable a Software Collection and to run applications in the Software Collection environment. General usage of the scl tool can be described using the following syntax: 98 C hapter 4 . Compiling and Building scl action software_collection_1 software_collection_2 command Example 4 .1. Running an Application Directly T o directly run Perl with the --version option in the Software Collection named software_collection_1, execute the following command: scl enable software_collection_1 'perl --version' Example 4 .2. Running a Shell with Multiple Software Collections Enabled T o run the Bash shell in the environment with multiple Software Collections enabled, execute the following command: scl enable software_collection_1 software_collection_2 bash T he command above enables two Software Collections named software_collection_1 and software_collection_2. Example 4 .3. Running Commands Stored in a File T o execute a number of commands, which are stored in a file, in the Software Collection environment, run the following command: cat cmd | scl enable software_collection_1 - T he command above executes commands, which are stored in the cm d file, in the environment of the Software Collection named software_collection_1. For more information regarding Software Collections and scl-utils, refer to the Software Collections Guide as part of the Red Hat Developer Toolset. [2] Fo r info rmatio n ab o ut tes ts that co n f i g ure c an p erfo rm, refer to the fo llo wing link: http ://www.g nu.o rg /s o ftware/auto c o nf/manual/auto c o nf.html#Exis ting -Tes ts 99 Red Hat Enterprise Linux 7 Developer Guide Chapter 5. Debugging Useful, well-written software generally goes through several different phases of application development, allowing ample opportunity for mistakes to be made. Some phases come with their own set of mechanisms to detect errors. For example, during compilation an elementary semantic analysis is often performed to make sure objects, such as variables and functions, are adequately described. T he error-checking mechanisms performed during each application development phase aims to catch simple and obvious mistakes in code. T he debugging phase helps to bring more subtle errors to light that fell through the cracks during routine code inspection. 5.1. ELF Executable Binaries Red Hat Enterprise Linux uses ELF for executable binaries, shared libraries, or debuginfo files. Within these debuginfo ELF files, the DWARF format is used. Version 3 of DWARF is used in ELF files (that is, gcc -g is equivalent to gcc -gdwarf-3). DWARF debuginfo includes: names of all the compiled functions and variables, including their target addresses in binaries source files used for compilation, including their source line numbers local variables location Important ST ABS is occasionally used with UNIX. ST ABS is an older, less capable format. Its use is discouraged by Red Hat. GCC and GDB support ST ABS production and consumption on a best effort basis only. Within these ELF files, the GCC debuginfo level is also used. T he default is level 2, where macro information is not present; level 3 has C/C++ macro definitions included, but the debuginfo can be very large with this setting. T he command for the default gcc -g is the same as gcc -g2. T o change the macro information to level three, use gcc -g3. T here are multiple levels of debuginfo available. Use the command readelf -WS file to see which sections are used in a file. T able 5.1. debuginfo levels Binary State Command Notes Stripped strip file or Only the symbols required for runtime linkage with shared libraries are present. gcc -s -o file ELF section in use: .dynsym gcc -o file Only the names of functions and variables are present, no binding to the source files and no types. ELF symbols ELF section in use: .sym tab 100 C hapter 5. Debugging Binary State Command Notes DWARF debuginfo with macros gcc -g -o file T he source file names and line numbers are known, including types. ELF section in use: .debug_* DWARF debuginfo with macros gcc -g3 -o file Similar to gcc -g but the macros are known to GDB. ELF section in use: .debug_m acro Note GDB never interprets the source files, it only displays them as text. Use gcc -g and its variants to store the information into DWARF. Compiling a program or library with gcc -rdynam ic is discouraged. For specific symbols, use gcc -Wl, --dynam ic-list=... instead. If gcc -rdynam ic is used, the strip command or -s gcc option have no effect. T his is because all ELF symbols are kept in the binary for possible runtime linkage with shared libraries. ELF symbols can be read by the readelf -s file command. DWARF symbols are read by the readelf -w file command. T he command readelf -wi file is a good verification of debuginfo, compiled within your program. T he commands strip file or gcc -s are commonly accidentally executed on the output during various compilation stages of the program. T he readelf -w file command can also be used to show a special section called .eh_fram e with a format and purpose is similar to the DWARF section .debug_fram e. T he .eh_fram e section is used for runtime C++ exception resolution and is present even if -g gcc option was not used. It is kept in the primary RPM and is never present in the debuginfo RPMs. Debuginfo RPMs contain the sections .sym tab and .debug_* . Neither .eh_fram e, .eh_fram e_hdr, nor .dynsym are moved or present in debuginfo RPMs as those sections are needed during program runtime. 5.2. Installing Debuginfo Packages Red Hat Enterprise Linux also provides -debuginfo packages for all architecture-dependent RPMs included in the operating system. A packagename-debuginfo-version-release.architecture.rpm package contains detailed information about the relationship of the package source files and the final installed binary. T he debuginfo packages contain both .debug files, which in turn contain DWARF debuginfo and the source files used for compiling the binary packages. 101 Red Hat Enterprise Linux 7 Developer Guide Note Most of the debugger functionality is missed if attempting to debug a package without having its debuginfo equivalent installed. For example, the names of exported shared library functions will still be available, but the matching source file lines will not be without the debuginfo package installed. Use gcc compilation option -g for your own programs. T he debugging experience is better if no optimizations (gcc option -O, such as -O2) is applied with -g. For Red Hat Enterprise Linux 6, the debuginfo packages are now available on a new channel on the Red Hat Network. T o install the -debuginfo package of a package (that is, typically packagenamedebuginfo), first the machine has to be subscribed to the corresponding Debuginfo channel. For example, for Red Hat Enterprise Server 6, the corresponding channel would be Red Hat Enterprise Linux Server Debuginfo (v. 6). Red Hat Enterprise Linux system packages are compiled with optimizations (gcc option -O2). T his means that some variables will be displayed as <optim ized out>. Stepping through code will 'jump' a little but a crash can still be analyzed. If some debugging information is missing because of the optimizations, the right variable information can be found by disassembling the code and matching it to the source manually. T his is applicable only in exceptional cases and is not suitable for regular debugging. For system packages, GDB informs the user if it is missing some debuginfo packages that limit its functionality. gdb ls [...] Reading symbols from /usr/bin/ls...(no debugging symbols found)...done. Missing separate debuginfos, use: debuginfo-install coreutils-8.4-16.el6.x86_64 (gdb) q If the system package to be debugged is known, use the command suggested by GDB above. It will also automatically install all the debug packages packagename depends on. # debuginfo-install packagename 5.2.1. Installing Debuginfo Packages for Core Files Analysis A core file is a representation of the memory image at the time of a process crash. For bug reporting of system program crashes, Red Hat recommends the use of the ABRT tool, explained in the Automatic Bug Reporting Tool chapter in the Red Hat Deployment Guide. If ABRT is not suitable for your purposes, the steps it automates are explained here. If the ulim it -c unlim ited setting is in use when a process crashes, the core file is dumped into the current directory. T he core file contains only the memory areas modified by the process from the original state of disk files. In order to perform a full analysis of a crash, a core file is required to have: the core file itself the executable binary which has crashed, such as /usr/sbin/sendm ail all the shared libraries loaded in the binary when it crashed .debug files and source files (both stored in debuginfo RPMs) for the executable and all of its loaded libraries 102 C hapter 5. Debugging For a proper analysis, either the exact version-release.architecture for all the RPMs involved or the same build of your own compiled binaries is needed. At the time of the crash, the application may have already recompiled or been updated by yum on the disk, rendering the files inappropriate for the core file analysis. T he core file contains build-ids of all the binaries involved. For more information on build-id, see Section 4.6, “build-id Unique Identification of Binaries”. T he contents of the core file can be displayed by: $ eu-unstrip -n --core=./core.9814 0x400000+0x207000 2818b2009547f780a5639c904cded443e564973e@0x400284 usr/bin/sleep /usr/lib/debug/bin/sleep.debug [exe] 0x7fff26fff000+0x1000 1e2a683b7d877576970e4275d41a6aaec280795e@0x7fff26fff340 . linux-vdso.so.1 0x35e7e00000+0x3b6000 374add1ead31ccb449779bc7ee7877de3377e5ad@0x35e7e00280 /usr/lib64/libc-2.14.90.so /usr/lib/debug/lib64/libc-2.14.90.so.debug libc.so.6 0x35e7a00000+0x224000 3ed9e61c2b7e707ce244816335776afa2ad0307d@0x35e7a001d8 /usr/lib64/ld-2.14.90.so /usr/lib/debug/lib64/ld-2.14.90.so.debug ld-linux-x8664.so.2 T he meaning of the columns in each line are: T he in-memory address where the specific binary was mapped to (for example, 0x4 00000 in the first line). T he size of the binary (for example, +0x207000 in the first line). T he 160-bit SHA-1 build-id of the binary (for example, 2818b200954 7f780a5639c904 cded4 4 3e564 973e in the first line). T he in-memory address where the build-id bytes were stored (for example, @ 0x4 00284 in the first line). T he on-disk binary file, if available (for example, usr/bin/sleep in the first line). T his was found by eu-unstrip for this module. T he on-disk debuginfo file, if available (for example, /usr/lib/debug/bin/sleep.debug). However, best practice is to use the binary file reference instead. T he shared library name as stored in the shared library list in the core file (for example, libc.so.6 in the third line). For each build-id (for example, ab/cdef01234 5678901234 5678901234 567890123) a symbolic link is included in its debuginfo RPM. Using the /usr/bin/sleep executable above as an example, the coreutils-debuginfo RPM contains, among other files: lrwxrwxrwx 1 root root 24 Nov 29 17:07 /usr/lib/debug/.buildid/28/18b2009547f780a5639c904cded443e564973e -> ../../../../../bin/sleep* lrwxrwxrwx 1 root root 21 Nov 29 17:07 /usr/lib/debug/.buildid/28/18b2009547f780a5639c904cded443e564973e.debug -> ../../bin/sleep.debug In some cases (such as loading a core file), GDB does not know the name, version, or release of a namedebuginfo-version-release.rpm package; it only knows the build-id. In such cases, GDB suggests a different command: 103 Red Hat Enterprise Linux 7 Developer Guide gdb -c ./core [...] Missing separate debuginfo for the main executable filename Try: yum --disablerepo='*' --enablerepo='*debug*' install /usr/lib/debug/.buildid/ef/dd0b5e69b0742fa5e5bad0771df4d1df2459d1 T he version-release.architecture of the binary package packagename-debuginfo-versionrelease.architecture.rpm must be an exact match. If it differs then GDB cannot use the debuginfo package. Even the same version-release.architecture from a different build leads to an incompatible debuginfo package. If GDB reports a missing debuginfo, ensure to recheck: rpm -q packagename packagename-debuginfo T he version-release.architecture definitions should match. rpm -V packagename packagename-debuginfo T his command should produce no output, except possibly modified configuration files of packagename, for example. rpm -qi packagename packagename-debuginfo T he version-release.architecture should display matching information for Vendor, Build Date, and Build Host. For example, using a CentOS debuginfo RPM for a Red Hat Enterprise Linux RPM package will not work. If the required build-id is known, the following command can query which RPM contains it: $ repoquery --disablerepo='*' --enablerepo='*-debug*' -qf /usr/lib/debug/.buildid/ef/dd0b5e69b0742fa5e5bad0771df4d1df2459d1 For example, a version of an executable which matches the core file can be installed by: # yum --enablerepo='*-debug*' install $(eu-unstrip -n --core=./core.9814 | sed -e 's#^[^ ]* \(..\)\([^@ ]*\).*$#/usr/lib/debug/.build-id/\1/\2#p' -e 's/$/.debug/') Similar methods are available if the binaries are not packaged into RPMs and stored in yum repositories. It is possible to create local repositories with custom application builds by using /usr/bin/createrepo. 5.3. GDB Fundamentally, like most debuggers, GDB manages the execution of compiled code in a very closely controlled environment. T his environment makes possible the following fundamental mechanisms necessary to the operation of GDB: Inspect and modify memory within the code being debugged (for example, reading and setting variables). Control the execution state of the code being debugged, principally whether it's running or stopped. Detect the execution of particular sections of code (for example, stop running code when it reaches a specified area of interest to the programmer). Detect access to particular areas of memory (for example, stop running code when it accesses a specified variable). Execute portions of code (from an otherwise stopped program) in a controlled manner. 104 C hapter 5. Debugging Detect various programmatic asynchronous events such as signals. T he operation of these mechanisms rely mostly on information produced by a compiler. For example, to view the value of a variable, GDB has to know: T he location of the variable in memory T he nature of the variable T his means that displaying a double-precision floating point value requires a very different process from displaying a string of characters. For something complex like a structure, GDB has to know not only the characteristics of each individual elements in the structure, but the morphology of the structure as well. GDB requires the following items in order to fully function: Debug Information Much of GDB's operations rely on a program's debug information. While this information generally comes from compilers, much of it is necessary only while debugging a program, that is, it is not used during the program's normal execution. For this reason, compilers do not always make that information available by default — GCC, for instance, must be explicitly instructed to provide this debugging information with the -g flag. T o make full use of GDB's capabilities, it is highly advisable to make the debug information available first to GDB. GDB can only be of very limited use when run against code with no available debug information. Source Code One of the most useful features of GDB (or any other debugger) is the ability to associate events and circumstances in program execution with their corresponding location in source code. T his location normally refers to a specific line or series of lines in a source file. T his, of course, would require that a program's source code be available to GDB at debug time. 5.3.1. Simple GDB GDB literally contains dozens of commands. T his section describes the most fundamental ones. br (breakpoint) T he breakpoint command instructs GDB to halt execution upon reaching a specified point in the execution. T hat point can be specified a number of ways, but the most common are just as the line number in the source file, or the name of a function. Any number of breakpoints can be in effect simultaneously. T his is frequently the first command issued after starting GDB. r (run) T he run command starts the execution of the program. If run is executed with any arguments, those arguments are passed on to the executable as if the program has been started normally. Users normally issue this command after setting breakpoints. Before an executable is started, or once the executable stops at, for example, a breakpoint, the state of many aspects of the program can be inspected. T he following commands are a few of the more common ways things can be examined. p (print) 105 Red Hat Enterprise Linux 7 Developer Guide T he print command displays the value of the argument given, and that argument can be almost anything relevant to the program. Usually, the argument is the name of a variable of any complexity, from a simple single value to a structure. An argument can also be an expression valid in the current language, including the use of program variables and library functions, or functions defined in the program being tested. bt (backtrace) T he backtrace displays the chain of function calls used up until the execution was terminated. T his is useful for investigating serious bugs (such as segmentation faults) with elusive causes. l (list) When execution is stopped, the list command shows the line in the source code corresponding to where the program stopped. T he execution of a stopped program can be resumed in a number of ways. T he following are the most common. c (continue) T he continue command restarts the execution of the program, which will continue to execute until it encounters a breakpoint, runs into a specified or emergent condition (for example, an error), or terminates. n (next) Like continue, the next command also restarts execution; however, in addition to the stopping conditions implicit in the continue command, next will also halt execution at the next sequential line of code in the current source file. s (step) Like next, the step command also halts execution at each sequential line of code in the current source file. However, if execution is currently stopped at a source line containing a function call, GDB stops execution after entering the function call (rather than executing it). fini (finish) Like the aforementioned commands, the finish command resumes executions, but halts when execution returns from a function. Finally, two essential commands: q (quit) T his terminates the execution. h (help) T he help command provides access to its extensive internal documentation. T he command takes arguments: help breakpoint (or h br), for example, shows a detailed description of the breakpoint command. Refer to the help output of each command for more detailed information. 5.3.2. Running GDB T his section will describe a basic execution of GDB, using the following simple program: 106 C hapter 5. Debugging hello.c #include <stdio.h> char hello[] = { "Hello, World!" }; int main() { fprintf (stdout, "%s\n", hello); return (0); } T he following procedure illustrates the debugging process in its most basic form. Procedure 5.1. Debugging a 'Hello World' Program 1. Compile hello.c into an executable with the debug flag set, as in: gcc -g -o hello hello.c Ensure that the resulting binary hello is in the same directory as hello.c. 2. Run gdb on the hello binary, that is, gdb hello. 3. After several introductory comments, gdb will display the default GDB prompt: (gdb) 4. T he variable hello is global, so it can be seen even before the m ain procedure starts: gdb) p hello $1 = "Hello, World!" (gdb) p hello[0] $2 = 72 'H' (gdb) p *hello $3 = 72 'H' (gdb) Note that the print targets hello[0] and * hello require the evaluation of an expression, as does, for example, * (hello + 1): (gdb) p *(hello + 1) $4 = 101 'e' 5. Next, list the source: (gdb) l 1 #include <stdio.h> 2 3 char hello[] = { "Hello, World!" }; 4 5 int 6 main() 107 Red Hat Enterprise Linux 7 Developer Guide 7 8 9 10 { fprintf (stdout, "%s\n", hello); return (0); } T he list reveals that the fprintf call is on line 8. Apply a breakpoint on that line and resume the code: (gdb) br 8 Breakpoint 1 at 0x80483ed: file hello.c, line 8. (gdb) r Starting program: /home/moller/tinkering/gdb-manual/hello Breakpoint 1, main () at hello.c:8 8 fprintf (stdout, "%s\n", hello); 6. Finally, use the next command to step past the fprintf call, executing it: (gdb) n Hello, World! 9 return (0); T he following sections describe more complex applications of GDB. 5.3.3. Conditional Breakpoints In many real-world cases, a program may perform its task well during the first few thousand times; it may then start crashing or encountering errors during its eight thousandth iteration of the task. Debugging programs like this can be difficult, as it is hard to imagine a programmer with the patience to issue a continue command thousands of times just to get to the iteration that crashed. Situations like this are common in real life, which is why GDB allows programmers to attach conditions to a breakpoint. For example, consider the following program: simple.c #include <stdio.h> main() { int i; for (i = 0;; i++) { fprintf (stdout, "i = %d\n", i); } } T o set a conditional breakpoint at the GDB prompt: (gdb) br 8 if i == 8936 Breakpoint 1 at 0x80483f5: file iterations.c, line 8. (gdb) r With this condition, the program execution will eventually stop with the following output: 108 C hapter 5. Debugging i i i i i = = = = = 8931 8932 8933 8934 8935 Breakpoint 1, main () at iterations.c:8 8 fprintf (stdout, "i = %d\n", i); Inspect the breakpoint information (using info br) to review the breakpoint status: (gdb) info br Num Type Disp Enb Address What 1 breakpoint keep y 0x080483f5 in main at iterations.c:8 stop only if i == 8936 breakpoint already hit 1 time 5.3.4. Forked Execution Among the more challenging bugs confronting programmers is where one program (the parent) makes an independent copy of itself (a fork). T hat fork then creates a child process which, in turn, fails. Debugging the parent process may or may not be useful. Often the only way to get to the bug may be by debugging the child process, but this is not always possible. T he set follow-fork-m ode feature is used to overcome this barrier allowing programmers to follow a a child process instead of the parent process. set follow-fork-m ode parent T he original process is debugged after a fork. T he child process runs unimpeded. T his is the default. set follow-fork-m ode child T he new process is debugged after a fork. T he parent process runs unimpeded. show follow-fork-m ode Display the current debugger response to a fork call. Use the set detach-on-fork command to debug both the parent and the child processes after a fork, or retain debugger control over them both. set detach-on-fork on T he child process (or parent process, depending on the value of follow-fork-m ode) will be detached and allowed to run independently. T his is the default. set detach-on-fork off Both processes will be held under the control of GDB. One process (child or parent, depending on the value of follow-fork-m ode) is debugged as usual, while the other is suspended. show detach-on-fork Show whether detach-on-fork mode is on or off. Consider the following program: 109 Red Hat Enterprise Linux 7 Developer Guide fork.c #include <unistd.h> int main() { pid_t pid; const char *name; pid = fork(); if (pid == 0) { name = "I am the child"; } else { name = "I am the parent"; } return 0; } T his program, compiled with the command gcc -g fork.c -o fork -lpthread and examined under GDB will show: gdb ./fork [...] (gdb) break main Breakpoint 1 at 0x4005dc: file fork.c, line 8. (gdb) run [...] Breakpoint 1, main () at fork.c:8 8 pid = fork(); (gdb) next Detaching after fork from child process 3840. 9 if (pid == 0) (gdb) next 15 name = "I am the parent"; (gdb) next 17 return 0; (gdb) print name $1 = 0x400717 "I am the parent" GDB followed the parent process and allowed the child process (process 3840) to continue execution. T he following is the same test using set follow-fork-m ode child. (gdb) set follow-fork-mode child (gdb) break main Breakpoint 1 at 0x4005dc: file fork.c, line 8. (gdb) run [...] Breakpoint 1, main () at fork.c:8 8 pid = fork(); (gdb) next [New process 3875] [Thread debugging using libthread_db enabled] [Switching to Thread 0x7ffff7fd5720 (LWP 3875)] 9 if (pid == 0) (gdb) next 11 name = "I am the child"; (gdb) next 110 C hapter 5. Debugging 17 return 0; (gdb) print name $2 = 0x400708 "I am the child" (gdb) GDB switched to the child process here. T his can be permanent by adding the setting to the appropriate .gdbinit. For example, if set follow-fork-m ode ask is added to ~/.gdbinit, then ask mode becomes the default mode. 5.3.5. Debugging Individual Threads GDB has the ability to debug individual threads, and to manipulate and examine them independently. T his functionality is not enabled by default. T o do so use set non-stop on and set target-async on. T hese can be added to .gdbinit. Once that functionality is turned on, GDB is ready to conduct thread debugging. For example, the following program creates two threads. T hese two threads, along with the original thread executing main makes a total of three threads. three-threads.c #include <stdio.h> #include <pthread.h> #include <unistd.h> pthread_t thread; void* thread3 (void* d) { int count3 = 0; while(count3 < 1000){ sleep(10); printf("Thread 3: %d\n", count3++); } return NULL; } void* thread2 (void* d) { int count2 = 0; while(count2 < 1000){ printf("Thread 2: %d\n", count2++); } return NULL; } int main (){ pthread_create (&thread, NULL, thread2, NULL); pthread_create (&thread, NULL, thread3, NULL); //Thread 1 int count1 = 0; while(count1 < 1000){ 111 Red Hat Enterprise Linux 7 Developer Guide printf("Thread 1: %d\n", count1++); } pthread_join(thread,NULL); return 0; } Compile this program in order to examine it under GDB. gcc -g three-threads.c -o three-threads gdb ./three-threads -lpthread First set breakpoints on all thread functions; thread1, thread2, and main. (gdb) break thread3 Breakpoint 1 at 0x4006c0: file three-threads.c, line 9. (gdb) break thread2 Breakpoint 2 at 0x40070c: file three-threads.c, line 20. (gdb) break main Breakpoint 3 at 0x40074a: file three-threads.c, line 30. T hen run the program. (gdb) run [...] Breakpoint 3, main () at three-threads.c:30 30 pthread_create (&thread, NULL, thread2, NULL); [...] (gdb) info threads * 1 Thread 0x7ffff7fd5720 (LWP 4620) main () at three-threads.c:30 (gdb) Note that the command info threads provides a summary of the program's threads and some details about their current state. In this case there is only one thread that has been created so far. Continue execution some more. (gdb) next [New Thread 0x7ffff7fd3710 (LWP 4687)] 31 pthread_create (&thread, NULL, thread3, NULL); (gdb) Breakpoint 2, thread2 (d=0x0) at three-threads.c:20 20 int count2 = 0; next [New Thread 0x7ffff75d2710 (LWP 4688)] 34 int count1 = 0; (gdb) Breakpoint 1, thread3 (d=0x0) at three-threads.c:9 9 int count3 = 0; info threads 3 Thread 0x7ffff75d2710 (LWP 4688) thread3 (d=0x0) at three-threads.c:9 2 Thread 0x7ffff7fd3710 (LWP 4687) thread2 (d=0x0) at three-threads.c:20 * 1 Thread 0x7ffff7fd5720 (LWP 4620) main () at three-threads.c:34 Here, two more threads are created. T he star indicates the thread currently under focus. Also, the newly created threads have hit the breakpoint set for them in their initialization functions. Namely, thread2() and thread3(). 112 C hapter 5. Debugging T o begin real thread debugging, use the thread <thread num ber> command to switch the focus to another thread. (gdb) thread 2 [Switching to thread 2 (Thread 0x7ffff7fd3710 (LWP 4687))]#0 at three-threads.c:20 20 int count2 = 0; (gdb) list 15 return NULL; 16 } 17 18 void* thread2 (void* d) 19 { 20 int count2 = 0; 21 22 while(count2 < 1000){ 23 printf("Thread 2: %d\n", count2++); 24 } thread2 (d=0x0) T hread 2 stopped at line 20 in its function thread2(). (gdb) next 22 while(count2 < 1000){ (gdb) print count2 $1 = 0 (gdb) next 23 printf("Thread 2: %d\n", (gdb) next Thread 2: 0 22 while(count2 < 1000){ (gdb) next 23 printf("Thread 2: %d\n", (gdb) print count2 $2 = 1 (gdb) info threads 3 Thread 0x7ffff75d2710 (LWP * 2 Thread 0x7ffff7fd3710 (LWP 1 Thread 0x7ffff7fd5720 (LWP (gdb) count2++); count2++); 4688) 4687) 4620) thread3 (d=0x0) at three-threads.c:9 thread2 (d=0x0) at three-threads.c:23 main () at three-threads.c:34 Above, a few lines of thread2 printed the counter count2 and left thread 2 at line 23 as is seen by the output of 'info threads'. Now thread3. (gdb) thread 3 [Switching to thread 3 (Thread 0x7ffff75d2710 (LWP 4688))]#0 at three-threads.c:9 9 int count3 = 0; (gdb) list 4 5 pthread_t thread; 6 7 void* thread3 (void* d) 8 { 9 int count3 = 0; 10 11 while(count3 < 1000){ 12 sleep(10); 13 printf("Thread 3: %d\n", count3++); (gdb) thread3 (d=0x0) 113 Red Hat Enterprise Linux 7 Developer Guide T hread three is a little different in that it has a sleep statement and executes slowly. T hink of it as a representation of an uninteresting IO thread. Because this thread is uninteresting, continue its execution uninterrupted, using the continue. (gdb) continue & (gdb) Thread 3: 0 Thread 3: 1 Thread 3: 2 Thread 3: 3 T ake note of the & at the end of the continue. T his allows the GDB prompt to return so other commands can be executed. Using the interrupt, execution can be stopped should thread 3 become interesting again. (gdb) interrupt [Thread 0x7ffff75d2710 (LWP 4688)] #3 stopped. 0x000000343f4a6a6d in nanosleep () at ../sysdeps/unix/syscall-template.S:82 82 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS) It is also possible to go back to the original main thread and examine it some more. (gdb) thread 1 [Switching to thread 1 (Thread 0x7ffff7fd5720 (LWP 4620))]#0 main () at three-threads.c:34 34 int count1 = 0; (gdb) next 36 while(count1 < 1000){ (gdb) next 37 printf("Thread 1: %d\n", count1++); (gdb) next Thread 1: 0 36 while(count1 < 1000){ (gdb) next 37 printf("Thread 1: %d\n", count1++); (gdb) next Thread 1: 1 36 while(count1 < 1000){ (gdb) next 37 printf("Thread 1: %d\n", count1++); (gdb) next Thread 1: 2 36 while(count1 < 1000){ (gdb) print count1 $3 = 3 (gdb) info threads 3 Thread 0x7ffff75d2710 (LWP 4688) 0x000000343f4a6a6d in nanosleep () at ../sysdeps/unix/syscall-template.S:82 2 Thread 0x7ffff7fd3710 (LWP 4687) thread2 (d=0x0) at three-threads.c:23 * 1 Thread 0x7ffff7fd5720 (LWP 4620) main () at three-threads.c:36 (gdb) As can be seen from the output of info threads, the other threads are where they were left, unaffected by the debugging of thread 1. 5.3.6. Alternative User Interfaces for GDB 114 C hapter 5. Debugging GDB uses the command line as its default interface. However, it also has an API called machine interface (MI). MI allows IDE developers to create other user interfaces to GDB. Some examples of these interfaces are: Eclipse (CDT ) A graphical debugger interface integrated with the Eclipse development environment. More information can be found at the Eclipse website. Nemiver A graphical debugger interface which is well suited to the GNOME Desktop Environment. More information can be found at the Nemiver website Emacs A GDB interface which is integrated with the emacs. More information can be found at the Emacs website 5.3.7. GDB Documentation For more detailed information about GDB, refer to the GDB manual: http://sources.redhat.com/gdb/current/onlinedocs/gdb.html Also, the commands info gdb and m an gdb will provide more concise information that is up to date with the installed version of gdb. 5.4. Variable Tracking at Assignments Variable Tracking at Assignments (VT A) is a new infrastructure included in GCC used to improve variable tracking during optimizations. T his allows GCC to produce more precise, meaningful, and useful debugging information for GDB, SystemT ap, and other debugging tools. When GCC compiles code with optimizations enabled, variables are renamed, moved around, or even removed altogether. As such, optimized compiling can cause a debugger to report that some variables have been <optimized out>. With VT A enabled, optimized code is internally annotated to ensure that optimization passes to transparently keep track of each variable's value, regardless of whether the variable is moved or removed. T he effect of this is more parameter and variable values available, even for the optimized (gcc -O2 -g built) code. It also displays the <optimized out> message less. VT A's benefits are more pronounced when debugging applications with inlined functions. Without VT A, optimization could completely remove some arguments of an inlined function, preventing the debugger from inspecting its value. With VT A, optimization will still happen, and appropriate debugging information will be generated for any missing arguments. VT A is enabled by default when compiling code with optimizations and debugging information enabled (that is, gcc -O -g or, more commonly, gcc -O2 -g). T o disable VT A during such builds, add the fno-var-tracking-assignm ents. In addition, the VT A infrastructure includes the new gcc option fcom pare-debug. T his option tests code compiled by GCC with debug information and without debug information: the test passes if the two binaries are identical. T his test ensures that executable code is not affected by any debugging options, which further ensures that there are no hidden bugs in the debug code. Note that -fcom pare-debug adds significant cost in compilation time. Refer to m an gcc for details about this option. 115 Red Hat Enterprise Linux 7 Developer Guide For more information about the infrastructure and development of VT A, refer to A Plan to Fix Local Variable Debug Information in GCC, available at the following link: http://gcc.gnu.org/wiki/Var_T racking_Assignments A slide deck version of this whitepaper is also available at http://people.redhat.com/aoliva/papers/vta/slides.pdf. 5.5. Python Pretty-Printers T he GDB command print outputs comprehensive debugging information for a target application. GDB aims to provide as much debugging data as it can to users; however, this means that for highly complex programs the amount of data can become very cryptic. In addition, GDB does not provide any tools that help decipher GDB print output. GDB does not even empower users to easily create tools that can help decipher program data. T his makes the practice of reading and understanding debugging data quite arcane, particularly for large, complex projects. For most developers, the only way to customize GDB print output (and make it more meaningful) is to revise and recompile GDB. However, very few developers can actually do this. Further, this practice will not scale well, particularly if the developer must also debug other programs that are heterogeneous and contain equally complex debugging data. T o address this, the Red Hat Enterprise Linux version of GDB is now compatible with Python prettyprinters. T his allows the retrieval of more meaningful debugging data by leaving the introspection, printing, and formatting logic to a third-party Python script. Compatibility with Python pretty-printers gives you the chance to truly customize GDB output as you see fit. T his makes GDB a more viable debugging solution to a wider range of projects, since you now have the flexibility to adapt GDB output as required, and with greater ease. Further, developers with intimate knowledge of a project and a specific programming language are best qualified in deciding what kind of output is meaningful, allowing them to improve the usefulness of that output. T he Python pretty-printers implementation allows users to automatically inspect, format, and print program data according to specification. T hese specifications are written as rules implemented via Python scripts. T his offers the following benefits: Safe T o pass program data to a set of registered Python pretty-printers, the GDB development team added hooks to the GDB printing code. T hese hooks were implemented with safety in mind: the built-in GDB printing code is still intact, allowing it to serve as a default fallback printing logic. As such, if no specialized printers are available, GDB will still print debugging data the way it always did. T his ensures that GDB is backwards-compatible; users who do not require pretty-printers can still continue using GDB. Highly Customizable T his new "Python-scripted" approach allows users to distill as much knowledge as required into specific printers. As such, a project can have an entire library of printer scripts that parses program data in a unique manner specific to its user's requirements. T here is no limit to the number of printers a user can build for a specific project; what's more, being able to customize debugging data script by script offers users an easier way to re-use and re-purpose printer scripts — or even a whole library of them. Easy to Learn 116 C hapter 5. Debugging T he best part about this approach is its lower barrier to entry. Python scripting is comparatively easy to learn and has a large library of free documentation available online. In addition, most programmers already have basic to intermediate experience in Python scripting, or in scripting in general. Here is a small example of a pretty printer. Consider the following C++ program: fruit.cc enum Fruits {Orange, Apple, Banana}; class Fruit { int fruit; public: Fruit (int f) { fruit = f; } }; int main() { Fruit myFruit(Apple); return 0; // line 17 } T his is compiled with the command g++ -g fruit.cc -o fruit. Now, examine this program with GDB. gdb ./fruit [...] (gdb) break 17 Breakpoint 1 at 0x40056d: file fruit.cc, line 17. (gdb) run Breakpoint 1, main () at fruit.cc:17 17 return 0; // line 17 (gdb) print myFruit $1 = {fruit = 1} T he output of {fruit = 1} is correct because that is the internal representation of 'fruit' in the data structure 'Fruit'. However, this is not easily read by humans as it is difficult to tell which fruit the integer 1 represents. T o solve this problem, write the following pretty printer: fruit.py class FruitPrinter: def __init__(self, val): self.val = val def to_string (self): fruit = self.val['fruit'] if (fruit == 0): name = "Orange" elif (fruit == 1): name = "Apple" elif (fruit == 2): 117 Red Hat Enterprise Linux 7 Developer Guide name = "Banana" else: name = "unknown" return "Our fruit is " + name def lookup_type (val): if str(val.type) == 'Fruit': return FruitPrinter(val) return None gdb.pretty_printers.append (lookup_type) Examine this printer from the bottom up. T he line gdb.pretty_printers.append (lookup_type) adds the function lookup_type to GDB's list of printer lookup functions. T he function lookup_type is responsible for examining the type of object to be printed, and returning an appropriate pretty printer. T he object is passed by GDB in the parameter val. val.type is an attribute which represents the type of the pretty printer. FruitPrinter is where the actual work is done. More specifically in the to_string function of that Class. In this function, the integer fruit is retrieved using the python dictionary syntax self.val['fruit']. T hen the name is determined using that value. T he string returned by this function is the string that will be printed to the user. After creating fruit.py, it must then be loaded into GDB with the following command: (gdb) python execfile("fruit.py") T he GDB and Python Pretty-Printers whitepaper provides more details on this feature. T his whitepaper also includes details and examples on how to write your own Python pretty-printer as well as how to import it into GDB. Refer to the following link for more information: http://sourceware.org/gdb/onlinedocs/gdb/Pretty-Printing.html 5.6. Debugging C/C++ Applications with Eclipse T he Eclipse C/C++ development tools have excellent integration with the GNU Debugger (GDB). T hese Eclipse plug-ins take advantage of the latest features available in GDB. Starting a debugging session for an application is similar to launching the application through either the context menu's Debug As → C/C++ Application, or using the Run menu. T he context menu can be accessed in one of three ways: Clicking the right mouse button with the cursor in the editor. On the application binary. On the project containing the binary of interest. If more than one binary can be launched, a dialog will be presented to choose which one. After the session has started, a prompt will appear to switch to the Debug perspective, which contains the following collection of views related to debugging. Control View 118 C hapter 5. Debugging T he Control View is known as the Debug view and has buttons for stepping over and into code selections. It also allows for thread process suspension. Source Code Editor View T he Source Code Editor View reflects which source code lines correspond to the position of the debugger in the execution. By pressing the Instruction Stepping Mode button in the Debug view toolbar, it is possible to control the execution of the application by assembly instruction instead of by source code line. Console View T he Console View displays the input and output that is available. Finally, variable data and other information can been found in the corresponding views in the Debug perspective. For further details, refer to the Concepts → Debug, Getting Started → Debugging Projects, and T asks → Running and Debugging Projects sections of the C/C++ Development User Guide in the Help Contents. 119 Red Hat Enterprise Linux 7 Developer Guide Chapter 6. Profiling Developers profile programs to focus attention on the areas of the program that have the largest impact on performance. T he types of data collected include what section of the program consumes the most processor time, and where memory is allocated. Profiling collects data from the actual program execution. T hus, the quality of the data collect is influenced by the actual tasks being performed by the program. T he tasks performed during profiling should be representative of actual use; this ensures that problems arising from realistic use of the program are addressed during development. Red Hat Enterprise Linux includes a number of different tools (Valgrind, OProfile, perf, and SystemT ap) to collect profiling data. Each tool is suitable for performing specific types of profile runs, as described in the following sections. 6.1. Valgrind Valgrind is an instrumentation framework for building dynamic analysis tools that can be used to profile applications in detail. Valgrind tools are generally used to automatically detect many memory management and threading problems. T he Valgrind suite also includes tools that allow the building of new profiling tools as required. Valgrind provides instrumentation for user-space binaries to check for errors, such as the use of uninitialized memory, improper allocation/freeing of memory, and improper arguments for systemcalls. Its profiling tools can be used by normal users on most binaries; however, compared to other profilers, Valgrind profile runs are significantly slower. T o profile a binary, Valgrind rewrites its executable and instruments the rewritten binary. Valgrind's tools are most useful for looking for memory-related issues in user-space programs; it is not suitable for debugging time-specific issues or kernel-space instrumentation/debugging. Previously, Valgrind did not support IBM System z architecture. However, as of 6.1, this support has been added, meaning Valgrind now supports all hardware architectures that are supported by Red Hat Enterprise Linux 6.x. 6.1.1. Valgrind Tools T he Valgrind suite is composed of the following tools: memcheck T his tool detects memory management problems in programs by checking all reads from and writes to memory and intercepting all system calls to m alloc, new, free, and delete. memcheck is perhaps the most used Valgrind tool, as memory management problems can be difficult to detect using other means. Such problems often remain undetected for long periods, eventually causing crashes that are difficult to diagnose. cachegrind cachegrind is a cache profiler that accurately pinpoints sources of cache misses in code by performing a detailed simulation of the I1, D1 and L2 caches in the CPU. It shows the number of cache misses, memory references, and instructions accruing to each line of source code; cachegrind also provides per-function, per-module, and whole-program summaries, and can even show counts for each individual machine instructions. callgrind Like cachegrind, callgrind can model cache behavior. However, the main purpose of callgrind is to record callgraphs data for the executed code. 120 C hapter 6. Profiling massif massif is a heap profiler; it measures how much heap memory a program uses, providing information on heap blocks, heap administration overheads, and stack sizes. Heap profilers are useful in finding ways to reduce heap memory usage. On systems that use virtual memory, programs with optimized heap memory usage are less likely to run out of memory, and may be faster as they require less paging. helgrind In programs that use the POSIX pthreads threading primitives, helgrind detects synchronization errors. Such errors are: Misuses of the POSIX pthreads API Potential deadlocks arising from lock ordering problems Data races (that is, accessing memory without adequate locking) Valgrind also allows you to develop your own profiling tools. In line with this, Valgrind includes the lackey tool, which is a sample that can be used as a template for generating your own tools. 6.1.2. Using Valgrind T he valgrind package and its dependencies install all the necessary tools for performing a Valgrind profile run. T o profile a program with Valgrind, use: valgrind --tool=toolname program Refer to Section 6.1.1, “Valgrind T ools” for a list of arguments for toolname. In addition to the suite of Valgrind tools, none is also a valid argument for toolname; this argument allows you to run a program under Valgrind without performing any profiling. T his is useful for debugging or benchmarking Valgrind itself. You can also instruct Valgrind to send all of its information to a specific file. T o do so, use the option -log-file=filename. For example, to check the memory usage of the executable file hello and send profile information to output, use: valgrind --tool=m em check --log-file=output hello Refer to Section 6.1.4, “Valgrind Documentation” for more information on Valgrind, along with other available documentation on the Valgrind suite of tools. 6.1.3. Valgrind Plug-in for Eclipse T he Valgrind plug-in for Eclipse integrates several Valgrind tools into Eclipse. T his allows Eclipse users to seamlessly include profiling capabilities into their workflow. At present, the Valgrind plug-in for Eclipse supports three Valgrind tools: Memcheck Massif Cachegrind T o launch a Valgrind profile run, navigate to Run > Profile. T his will open the Profile As dialog, from which you can select a tool for a profile run. 121 Red Hat Enterprise Linux 7 Developer Guide Figure 6.1. Profile As T o configure each tool for a profile run, navigate to Run > Profile Configuration. T his will open the Profile Configuration menu. 122 C hapter 6. Profiling Figure 6.2. Profile Configuration T he Valgrind plug-in for Eclipse is provided by the eclipse-valgrind package. For more information about this plug-in, refer to Valgrind Integration User Guide in the Eclipse Help Contents. 6.1.4. Valgrind Documentation For more extensive information on Valgrind, refer to m an valgrind. Red Hat Enterprise Linux 6 also provides a comprehensive Valgrind Documentation book, available as PDF and HT ML in: file:///usr/share/doc/valgrind-version/valgrind_m anual.pdf file:///usr/share/doc/valgrind-version/htm l/index.htm l T he Valgrind Integration User Guide in the Eclipse Help Contentsalso provides detailed information on the setup and usage of the Valgrind plug-in for Eclipse. T his guide is provided by the eclipsevalgrind package. 6.2. OProfile OProfile is a system-wide Linux profiler, capable of running at low overhead. It consists of a kernel driver and a daemon for collecting raw sample data, along with a suite of tools for parsing that data into meaningful information. OProfile is generally used by developers to determine which sections of code consume the most amount of CPU time, and why. 123 Red Hat Enterprise Linux 7 Developer Guide During a profile run, OProfile uses the processor's performance monitoring hardware. Valgrind rewrites the binary of an application, and in turn instruments it. OProfile, on the other hand,profiles a running application as-is. It sets up the performance monitoring hardware to take a sample every x number of events (for example, cache misses or branch instructions). Each sample also contains information on where it occurred in the program. OProfile's profiling methods consume less resources than Valgrind. However, OProfile requires root privileges. OProfile is useful for finding "hot-spots" in code, and looking for their causes (for example, poor cache performance, branch mispredictions). Using OProfile involves starting the OProfile daemon (oprofiled), running the program to be profiled, collecting the system profile data, and parsing it into a more understandable format. OProfile provides several tools for every step of this process. 6.2.1. OProfile Tools T he most useful OProfile commands include the following: operf New in Red Hat Enterprise Linux 7, operf uses the Linux Performance Events subsystem, and so can completely replace use of the opcontrol daemon. See the Red Hat Enterprise Linux 7 System Administrator's Guide for further details. opcontrol T his tool is used to start/stop the OProfile daemon and configure a profile session. opreport T he opreport command outputs binary image summaries, or per-symbol data, from OProfile profiling sessions. opannotate T he opannotate command outputs annotated source and/or assembly from the profile data of an OProfile session. oparchive T he oparchive command generates a directory populated with executable, debug, and OProfile sample files. T his directory can be moved to another machine (via tar), where it can be analyzed offline. opgprof Like opreport, the opgprof command outputs profile data for a given binary image from an OProfile session. T he output of opgprof is in gprof format. For a complete list of OProfile commands, refer to m an oprofile. For detailed information on each OProfile command, refer to its corresponding m an page. Refer to Section 6.2.4, “OProfile Documentation” for other available documentation on OProfile. 6.2.2. Using OProfile T he oprofile package and its dependencies install all the necessary utilities for executing OProfile. T o instruct OProfile to profile all the applications running on the system and to group the samples for the shared libraries with the application using the library, run the following command: 124 C hapter 6. Profiling # opcontrol --no-vmlinux --separate=library --start You can also start the OProfile daemon without collecting system data. T o do so, use the option --startdaem on. T he --stop option halts data collection, while --shutdown terminates the OProfile daemon. Use opreport, opannotate, or opgprof to display the collected profiling data. By default, the data collected by the OProfile daemon is stored in /var/lib/oprofile/sam ples/. OProfile conflict with Performance Counters for Linux (PCL) tools Both OProfile and Performance Counters for Linux (PCL) use the same hardware Performance Monitoring Unit (PMU). If the PCL or the NMI watchdog timer are using the hardware PMU, a message like the following occurs when starting OProfile: # opcontrol --start Using default event: CPU_CLK_UNHALTED:100000:0:1:1 Error: counter 0 not available nmi_watchdog using this resource ? Try: opcontrol --deinit echo 0 > /proc/sys/kernel/nmi_watchdog Stop any perf commands running on the system, then turn off the NMI watchdog and reload the OProfile kernel driver with the following commands: # opcontrol --deinit # echo 0 > /proc/sys/kernel/nmi_watchdog 6.2.3. OProfile in Red Hat Enterprise Linux 7 OProfile 0.9.8 has been released for Red Hat Enterprise Linux 7. T his is an alpha version but has proven stable for many users. With the 0.9.8 release OProfile can now also be used to profile specific individual processes. 6.2.3.1. New Features A new operf program is now available that allows non-root users to profile single processes. T his can also be used for system-wide profiling, but in this case root authority is required. T his capability requires a kernel version of 2.6.31 or greater. OProfile also supports a number of new processors: T ilera tile64 T ilera tilepro T ilera tile-gx IBM System z10 IBM System z196 Intel Ivy Bridge ARMv7 Cortex-A5 ARMv7 Cortex-A15 125 Red Hat Enterprise Linux 7 Developer Guide ARMv7 Cortex-A7 6.2.3.2. Incompatibilities with the Previous Release OProfile 0.9.8 has some incompatibilities with the previous release: Support for pre-2.6 kernels has been removed. With the removal of pre-2.6 support, the --with-kernel-support configure option is no longer needed nor valid. Sample header mtime field has changed to u64. T he configure.in file has been renamed to configure.ac. T his should a transparent change. 6.2.3.3. Known Problems and Limitiations OProfile 0.9.8 has a few known problems and limitations. T hese are: AMD Instruction Based Sampling (IBS) is not currently supported with the new operf program. Use the legacy opcontrol commands for IBS profiling. When using operf to profile multiple events, the absolute number of events recorded will usually be substantially fewer than expected. T his is due to a bug in the Linux kernel's Performance Events Subsystem that was fixed between Linux kernel version 3.1 and 3.5. If NMI watchdog is not disabled on x86_64 systems, opcontrol may fail to allocate the hardware performance counters it needs. T he progress of this issue can be followed in bugzilla at https://bugzilla.redhat.com/show_bug.cgi?id=683176. Many Alpha ev67 events do not work. T he progress of this issue can be followed in bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=931875. 6.2.4. OProfile Documentation For a more extensive information on OProfile, refer to m an oprofile. Red Hat Enterprise Linux also provides two comprehensive guides to OProfile in file:///usr/share/doc/oprofile-version/: OProfile Manual A comprehensive manual with detailed instructions on the setup and use of OProfile is found at file:///usr/share/doc/oprofile-version/oprofile.htm l OProfile Internals Documentation on the internal workings of OProfile, useful for programmers interested in contributing to the OProfile upstream, can be found at file:///usr/share/doc/oprofile-version/internals.htm l T he OProfile Integration User Guide in the Eclipse Help Contents also provides detailed information on the setup and usage of the OProfile plug-in for Eclipse. T his guide is provided by the eclipseoprofile package. 6.3. SystemTap SystemT ap is a useful instrumentation platform for probing running processes and kernel activity on the Linux system. T o execute a probe: 126 C hapter 6. Profiling 1. Write SystemTap scripts that specify which system events (for example, virtual file system reads, packet transmissions) should trigger specified actions (for example, print, parse, or otherwise manipulate data). 2. SystemT ap translates the script into a C program, which it compiles into a kernel module. 3. SystemT ap loads the kernel module to perform the actual probe. SystemT ap scripts are useful for monitoring system operation and diagnosing system issues with minimal intrusion into the normal operation of the system. You can quickly instrument running system test hypotheses without having to recompile and re-install instrumented code. T o compile a SystemT ap script that probes kernel-space, SystemT ap uses information from three different kernel information packages: kernel-variant-devel-version kernel-variant-debuginfo-version kernel-debuginfo-com m on-arch-version T hese kernel information packages must match the kernel to be probed. In addition, to compile SystemT ap scripts for multiple kernels, the kernel information packages of each kernel must also be installed. An important new feature has been added as of Red Hat Enterprise Linux 6.1: the --rem ote option. T his allows users to build the SystemT ap module locally, and then execute it remotely via SSH. T he syntax to use this is --rem ote [USER@ ]HOST NAME; set the execution target to the specified SSH host, optionally using a different username. T his option may be repeated to target multiple execution targets. Passes 1-4 are completed locally as normal to build the script, and then pass 5 copies the module to the target and runs it. 6.3.1. DynInst with SystemTap 2.0 SystemT ap 2.0 introduces experamental support for running instrumentation using the DynInst system. DynInst is a pure-userspace binary manipulation library that allows programs to modify other running programs. It does this by inserting highly efficient instrumentation or other modifications. SystemT ap 2.0 and later can use this as a backend to run a restricted class of scripts. In exchange for the restrictions, the instrumentation runs fast and entirely in user-space with no root access or kernel module operations required. T he restrictions are evolving but are tighter than those for unprivileged user probing that relies on cryptography, kernel modules, and membership in special groups. T o use this experamental backend, add an extra --runtim e option on the stap command line: $ stap --runtime=stapdyn script.stp -c command If the script requires facilities beyond those available with DynInst, SystemT ap will advise. If this is the case, the standard kernel-module-based backends will have to be used with the --runtim e option omitted. 6.3.2. SystemTap Compile Server SystemT ap in Red Hat Enterprise Linux 7 supports a compile server and client deployment. With this setup, the kernel information packages of all client systems in the network are installed on just one compile server host (or a few). When a client system attempts to compile a kernel module from a SystemT ap script, it remotely accesses the kernel information it requires from the centralized compile server host. A properly configured and maintained SystemT ap compile server host offers the following benefits: 127 Red Hat Enterprise Linux 7 Developer Guide T he system administrator can verify the integrity of kernel information packages before making the packages available to users. T he identity of a compile server can be authenticated using the Secure Socket Layer (SSL). SSL provides an encrypted network connection that prevents eavesdropping or tampering during transmission. Individual users can run their own servers and authorize them for their own use as trusted. System administrators can authorize one or more servers on the network as trusted for use by all users. A server that has not been explicitly authorized is ignored, preventing any server impersonations and similar attacks. 6.3.3. SystemTap Support for Unprivileged Users For security purposes, users in an enterprise setting are rarely given privileged (that is, root or sudo) access to their own machines. In addition, full SystemT ap functionality should also be restricted to privileged users, as this can provide the ability to completely take control of a system. SystemT ap in Red Hat Enterprise Linux 7 features a new option to the SystemT ap client: -unprivileged. T his option allows an unprivileged user to run stap. Of course, several restrictions apply to unprivileged users that attempt to run stap. Note An unprivileged user is a member of the group stapusr but is not a member of the group stapdev (and is not root). Before loading any kernel modules created by unprivileged users, SystemT ap verifies the integrity of the module using standard digital (cryptographic) signing techniques. Each time the --unprivileged option is used, the server checks the script against the constraints imposed for unprivileged users. If the checks are successful, the server compiles the script and signs the resulting module using a self-generated certificate. When the client attempts to load the module, staprun first verifies the signature of the module by checking it against a database of trusted signing certificates maintained and authorized by root. Once a signed kernel module is successfully verified, staprun is assured that: T he module was created using a trusted systemtap server implementation. T he module was compiled using the --unprivileged option. T he module meets the restrictions required for use by an unprivileged user. T he module has not been tampered with since it was created. 6.3.4. SSL and Certificate Management SystemT ap in Red Hat Enterprise Linux 7 implements authentication and security via certificates and public/private key pairs. It is the responsibility of the system administrator to add the credentials (that is, certificates) of compile servers to a database of trusted servers. SystemT ap uses this database to verify the identity of a compile server that the client attempts to access. Likewise, SystemT ap also uses this method to verify kernel modules created by compile servers using the --unprivileged option. 128 C hapter 6. Profiling 6.3.4 .1. Authorizing Compile Servers for Connection T he first time a compile server is started on a server host, the compile server automatically generates a certificate. T his certificate verifies the compile server's identity during SSL authentication and module signing. In order for clients to access the compile server (whether on the same server host or from a client machine), the system administrator must add the compile server's certificate to a database of trusted servers. Each client host intending to use compile servers maintains such a database. T his allows individual users to customize their database of trusted servers, which can include a list of compile servers authorized for their own use only. 6.3.4 .2. Authorizing Compile Servers for Module Signing (for Unprivileged Users) Unprivileged users can only load signed, authorized SystemT ap kernel modules. For modules to be recognized as such, they have to be created by a compile server whose certificate appears in a database of trusted signers; this database must be maintained on each host where the module will be loaded. 6.3.4 .3. Automatic Authorization Servers started using the stap-server initscript are automatically authorized to receive connections from all clients on the same host. Servers started by other means are automatically authorized to receive connections from clients on the same host run by the user who started the server. T his was implemented with convenience in mind; users are automatically authorized to connect to a server they started themselves, provided that both client and server are running on the same host. Whenever root starts a compile server, all clients running on the same host automatically recognize the server as authorized. However, Red Hat advises that you refrain from doing so. Similarly, a compile server initiated through stap-server is automatically authorized as a trusted signer on the host in which it runs. If the compile server was initiated through other means, it is not automatically authorized as such. 6.3.5. SystemTap Documentation For more detailed information about SystemT ap, refer to the following books (also provided by Red Hat): SystemTap Beginner's Guide SystemTap Tapset Reference T he SystemTap Beginner's Guide and SystemTap Tapset Reference are also available locally when you install the system tap package: file:///usr/share/doc/system tap-version/System T ap_Beginners_Guide/index.htm l file:///usr/share/doc/system tap-version/System T ap_Beginners_Guide.pdf file:///usr/share/doc/system tap-version/tapsets/index.htm l file:///usr/share/doc/system tap-version/tapsets.pdf Section 6.3.2, “SystemT ap Compile Server”, Section 6.3.3, “SystemT ap Support for Unprivileged Users”, and Section 6.3.4, “ SSL and Certificate Management” are all excerpts from the SystemTap Support for Unprivileged Users and Server Client Deployment whitepaper. T his whitepaper also provides more details on each feature, along with a case study to help illustrate their application in a real-world environment. 129 Red Hat Enterprise Linux 7 Developer Guide 6.4. Performance Counters for Linux (PCL) Tools and perf Performance Counters for Linux (PCL) is a new kernel-based subsystem that provides a framework for collecting and analyzing performance data. T hese events will vary based on the performance monitoring hardware and the software configuration of the system. Red Hat Enterprise Linux 6 includes this kernel subsystem to collect data and the user-space tool perf to analyze the collected performance data. T he PCL subsystem can be used to measure hardware events, including retired instructions and processor clock cycles. It can also measure software events, including major page faults and context switches. For example, PCL counters can compute the Instructions Per Clock (IPC) from a process's counts of instructions retired and processor clock cycles. A low IPC ratio indicates the code makes poor use of the CPU. Other hardware events can also be used to diagnose poor CPU performance. Performance counters can also be configured to record samples. T he relative frequency of samples can be used to identify which regions of code have the greatest impact on performance. 6.4.1. Perf Tool Commands Useful perf commands include the following: perf stat T his perf command provides overall statistics for common performance events, including instructions executed and clock cycles consumed. Options allow selection of events other than the default measurement events. perf record T his perf command records performance data into a file which can be later analyzed using perf report. perf report T his perf command reads the performance data from a file and analyzes the recorded data. perf list T his perf command lists the events available on a particular machine. T hese events will vary based on the performance monitoring hardware and the software configuration of the system. Use perf help to obtain a complete list of perf commands. T o retrieve m an page information on each perf command, use perf help command. 6.4.2. Using Perf Using the basic PCL infrastructure for collecting statistics or samples of program execution is relatively straightforward. T his section provides simple examples of overall statistics and sampling. T o collect statistics on m ake and its children, use the following command: # perf stat -- make all T he perf command collects a number of different hardware and software counters. It then prints the following information: 130 C hapter 6. Profiling Performance counter stats for 'make all': 244011.782059 53328 515 1843121 789702529782 1050912611378 275538938708 2888756216 4343060367 428257037 task-clock-msecs context-switches CPU-migrations page-faults cycles instructions branches branch-misses cache-references cache-misses 263.779192511 seconds time elapsed # # # # # # # # # # 0.925 CPUs 0.000 M/sec 0.000 M/sec 0.008 M/sec 3236.330 M/sec 1.331 IPC 1129.203 M/sec 1.048 % 17.799 M/sec 1.755 M/sec T he perf tool can also record samples. For example, to record data on the m ake command and its children, use: # perf record -- make all T his prints out the file in which the samples are stored, along with the number of samples collected: [ perf record: Woken up 42 times to write data ] [ perf record: Captured and wrote 9.753 MB perf.data (~426109 samples) ] As of Red Hat Enterprise Linux 6.4, a new functionality to the {} group syntax has been added that allows the creation of event groups based on the way they are specified on the command line. T he current --group or -g options remain the same; if it is specified for record, stat, or top command, all the specified events become members of a single group with the first event as a group leader. T he new {} group syntax allows the creation of a group like: # perf record -e '{cycles, faults}' ls T he above results in a single event group containing cycles and faults events, with the cycles event as the group leader. All groups are created with regards to threads and CPUs. As such, recording an event group within two threads on a server with four CPUs will create eight separate groups. It is possible to use a standard event modifier for a group. T his spans over all events in the group and updates each event modifier settings. # perf record -r '{faults:k,cache-references}:p' T he above command results in the :kp modifier being used for faults, and the :p modifier being used for the cache-references event. Performance Counters for Linux (PCL) T ools conflict with OProfile Both OProfile and Performance Counters for Linux (PCL) use the same hardware Performance Monitoring Unit (PMU). If OProfile is currently running while attempting to use the PCL perf command, an error message like the following occurs when starting OProfile: 131 Red Hat Enterprise Linux 7 Developer Guide Error: open_counter returned with 16 (Device or resource busy). /usr/bin/dmesg may provide additional information. Fatal: Not all events could be opened. T o use the perf command, first shut down OProfile: # opcontrol --deinit You can then analyze perf.data to determine the relative frequency of samples. T he report output includes the command, object, and function for the samples. Use perf report to output an analysis of perf.data. For example, the following command produces a report of the executable that consumes the most time: # perf report --sort=comm T he resulting output: # Samples: 1083783860000 # # Overhead Command # ........ ............... # 48.19% xsltproc 44.48% pdfxmltex 6.01% make 0.95% perl 0.17% kernel-doc 0.05% xmllint 0.05% cc1 0.03% cp 0.01% xmlto 0.01% sh 0.01% docproc 0.01% ld 0.01% gcc 0.00% rm 0.00% sed 0.00% git-diff-files 0.00% bash 0.00% git-diff-index T he column on the left shows the relative frequency of the samples. T his output shows that m ake spends most of this time in xsltproc and the pdfxm ltex. T o reduce the time for the m ake to complete, focus on xsltproc and pdfxm ltex. T o list the functions executed by xsltproc, run: # perf report -n --comm=xsltproc T his generates: comm: xsltproc # Samples: 472520675377 # # Overhead Samples Shared Object Symbol # ........ .......... ............................. ...... # 45.54%215179861044 libxml2.so.2.7.6 [.] xmlXPathCmpNodesExt 132 C hapter 6. Profiling 11.63%54959620202 libxml2.so.2.7.6 xmlXPathNodeSetAdd__internal_alias 8.60%40634845107 libxml2.so.2.7.6 4.63%21864091080 libxml2.so.2.7.6 2.73%12919672281 libxml2.so.2.7.6 xmlXPathNodeSetSort__internal_alias 2.60%12271959697 libxml2.so.2.7.6 2.41%11379910918 libxml2.so.2.7.6 xmlXPathIsNaN__internal_alias 2.19%10340901937 libxml2.so.2.7.6 [.] [.] xmlXPathCompOpEval [.] xmlXPathReleaseObject [.] [.] valuePop [.] [.] valuePush__internal_alias 6.5. ftrace T he ftrace framework provides users with several tracing capabilities, accessible through an interface much simpler than SystemT ap's. T his framework uses a set of virtual files in the debugfs file system; these files enable specific tracers. T he ftrace function tracer outputs each function called in the kernel in real time; other tracers within the ftrace framework can also be used to analyze wakeup latency, task switches, kernel events, and the like. You can also add new tracers for ftrace, making it a flexible solution for analyzing kernel events. T he ftrace framework is useful for debugging or analyzing latencies and performance issues that take place outside of user-space. Unlike other profilers documented in this guide, ftrace is a built-in feature of the kernel. 6.5.1. Using ftrace T he Red Hat Enterprise Linux kernels have been configured with the CONFIG_FT RACE=y option. T his option provides the interfaces required by ftrace. T o use ftrace, mount the debugfs file system as follows: m ount -t debugfs nodev /sys/kernel/debug All the ftrace utilities are located in /sys/kernel/debug/tracing/. View the /sys/kernel/debug/tracing/available_tracers file to find out what tracers are available for your kernel: cat /sys/kernel/debug/tracing/available_tracers power wakeup irqsoff function sysprof sched_switch initcall nop T o use a specific tracer, write it to /sys/kernel/debug/tracing/current_tracer. For example, wakeup traces and records the maximum time it takes for the highest-priority task to be scheduled after the task wakes up. T o use it: echo wakeup > /sys/kernel/debug/tracing/current_tracer T o start or stop tracing, write to /sys/kernel/debug/tracing/tracing_on, as in: echo 1 > /sys/kernel/debug/tracing/tracing_on (enables tracing) echo 0 > /sys/kernel/debug/tracing/tracing_on (disables tracing) T he results of the trace can be viewed from the following files: /sys/kernel/debug/tracing/trace 133 Red Hat Enterprise Linux 7 Developer Guide T his file contains human-readable trace output. /sys/kernel/debug/tracing/trace_pipe T his file contains the same output as /sys/kernel/debug/tracing/trace, but is meant to be piped into a command. Unlike /sys/kernel/debug/tracing/trace, reading from this file consumes its output. 6.5.2. ftrace Documentation T he ftrace framework is fully documented in the following files: ftrace - Function Tracer: file:///usr/share/doc/kerneldoc-version/Docum entation/trace/ftrace.txt function tracer guts: file:///usr/share/doc/kerneldoc-version/Docum entation/trace/ftrace-design.txt Note T he trace-cmd package provides a tool of the same name that can be a useful alternative to ftrace. Further information is available on the trace-cm d man page. 134 C hapter 7. Red Hat Developer T oolset Chapter 7. Red Hat Developer Toolset Red Hat Developer T oolset is a Red Hat offering for developers on the Red Hat Enterprise Linux platform, and provides a complete set of development and performance analysis tools that can be installed and used on multiple versions of Red Hat Enterprise Linux. Executables built with the Red Hat Developer T oolset toolchain can then also be deployed and run on multiple versions of Red Hat Enterprise Linux. Red Hat Developer T oolset does not replace the default system tools and libraries provided with Red Hat Enterprise Linux 6 when installed on this platform. Instead, a parallel set of developer tools provides an alternative, newer version of those tools for optional use by developers. Applications and libraries provided by Red Hat Developer T oolset do not replace the Red Hat Enterprise Linux system versions, nor are they used in preference to the system versions. T he default compiler and debugger, for example, remain those provided by the base Red Hat Enterprise Linux system. Developers can pick and choose at any time which version of the tool they would like to use by using the scl utility. For details on how to install the product and invoke the executables, see the Red Hat Developer Toolset 2.1 User Guide. 7.1. Red Hat Developer Toolset Features In comparison with Red Hat Enterprise Linux 6, Red Hat Developer T oolset provides more recent versions of the Eclipse development environment, GNU Compiler Collection (GCC), GNU Debugger (GDB), and other development and performance analysis tools as listed in T able 7.1, “Red Hat Developer T oolset Components”. T hese updated tools allow developers to develop applications while using experimental C++11 language features, including atomic types and T ransactional Memory, the latest compiler optimizations, parallel programming with OpenMP 3.1, and improved debugging support. T able 7.1. Red Hat Developer T oolset Components Name Version Description Eclipse 4.3.1 An integrated development environment for the graphical user interface. [a] GCC 4.8.2 A portable compiler suite with support for C, C++, and Fortran. binutils 2.23.52 A collection of binary tools and other utilities to inspect and manipulate object files and binaries. elfutils 0.157 A collection of binary tools and other utilities to inspect and manipulate ELF files. dwz 0.11 A tool to optimize DWARF debugging information contained in ELF shared libraries and ELF executables for size. Git 1.8.4 A distributed revision control system with a peer-to-peer architecture. GDB 7.6.1 A command line debugger for programs written in C, C++, and Fortran. strace 4.7 A debugging tool to monitor system calls that a program uses and signals it receives. memstomp 0.1.4 A debugging tool to identify calls to library functions with overlapping memory regions that are not allowed by various standards. SystemT ap 2.1 A tracing and probing tool to monitor the activities of the entire system without the need to instrument, recompile, install, and reboot. 135 Red Hat Enterprise Linux 7 Developer Guide Name Version Description Valgrind 3.8.1 An instrumentation framework and a number of tools to profile applications in order to detect memory errors, identify memory management problems, and report any use of improper arguments in system calls. OProfile 0.9.8 A system-wide profiler that uses the performance monitoring hardware on the processor to retrieve information about the kernel and executables on the system. Dyninst 8.0 A library for instrumenting and working with user-space executables during their execution. [a] If yo u intend to d evelo p ap p lic atio ns fo r Red Hat JBo s s Mid d leware o r req uire s up p o rt fo r O p enShift To o ls , it is rec o mmend ed that yo u us e Red Hat JBo s s Develo p er Stud io . 7.2. Changes in binutils Red Hat Developer T oolset 2.0 is distributed with binutils 2.23.52, which provides a number of bug fixes and feature enhancements over the Red Hat Enterprise Linux system version and the version included in Red Hat Developer T oolset 1.1. Below is a comprehensive list of new features in this release. T he GNU assembler (as), GNU linker (ld), and other binary tools that are part of binutils are now released under the GNU General Public License, version 3. 7.2.1. GNU Linker Another ELF linker, gold, is now available in addition to ld, the existing GNU linker. gold is intended to be a drop-in replacement for ld, so ld's documentation is intended to be the reference documentation. gold supports most of ld's features, except notable ones such as MRI-compatible linker scripts, crossreference reports (--cref), and various other minor options. It also provides significantly improved link time with very large C++ applications. In Red Hat Developer T oolset 2.0, the gold linker is not enabled by default. Users can explicitly switch between ld and gold by using the alternatives mechanism. 7.2.1.1. New Features Changes Since Red Hat Enterprise Linux 6.4 T he following features have been added since the release of binutils included in Red Hat Enterprise Linux 6.4: A new INPUT _SECT ION_FLAGS keyword has been added to the linker script language. T his keyword can be used to select input sections by section header flags. A new SORT _BY_INIT _PRIORIT Y keyword has been added to the linker script language. T his keyword can be used to sort sections by numerical value of the GCC init_priority attribute encoded in the section name. A new SORT _NONE keyword has been added to the linker script language. T his keyword can be used to disable section sorting. A new linker-provided symbol, __ehdr_start, has been added. When producing ELF output, this symbol points to the ELF file header (and nearby program headers) in the program's memory image. Changes Since Red Hat Enterprise Linux 5.9 136 C hapter 7. Red Hat Developer T oolset T he following features have been added since the release of binutils included in Red Hat Enterprise Linux 5.9: GNU/Linux targets now support the ST B_GNU_UNIQUE symbol binding, a GNU extension to the standard set of ELF symbol bindings. T he binding is passed on to the dynamic linker, which ensures that in the entire process there is only one symbol with the given name and type in use. Note T he implementation of this feature depends on capabilities only found in newer versions of the glibc library. Consequently, this feature is currently available in Red Hat Developer T oolset for Red Hat Enterprise Linux 6. A new command line option --no-export-dynam ic has been added. T his option can be used to undo the effect of the -E and --export-dynam ic options. A new command line option --warn-alternate-em has been added. T his option can be used to display a warning if an ELF format object file uses an alternate machine code. A new linker script function REGION_ALIAS has been added. T his function can be used to create alias names of memory regions. A new command line option -T text-segm ent address has been added for ELF-based targets. T his option can be used to set the address of the first byte of the text segment. A new linker script command INSERT has been added. T his command can be used to augment the default script. In a linker script input section, it is now possible to specify a file within an archive by using the archive:file syntax. T he --sort-com m on command line option now accepts ascending and descending as optional arguments. T his can be used to specify which sorting order to use. A new command line option --build-id has been added for ELF-based targets. T his option can be used to generate a unique per-binary identifier embedded in a note section. A new command line option --default-script=file_name (or -dT file_name) has been added. T his option can be used to specify a replacement for the built-in linker script. A new command line option -Bsym bolic-functions has been added. When creating a shared library, this option will cause references to global function symbols to be bound to the definitions with the shared library, if such exist. T he new command line options --dynam ic-list-cpp-new and --dynam ic-list-data have been added, which can be used to modify the dynamic list. 7.2.1.2. Compatibility Changes Changes Since Red Hat Enterprise Linux 6.4 T he following compatibility changes have been made since the release of binutils included in Red Hat Enterprise Linux 6.4: 137 Red Hat Enterprise Linux 7 Developer Guide T he --copy-dt-needed-entries command line option is no longer enabled by default. Instead, -no-copy-dt-needed-entries is now the default option. Evaluation of linker script expressions has been significantly improved. Note that this can negatively affect scripts that rely on undocumented behavior of the old expression evaluation. Changes Since Red Hat Enterprise Linux 5.9 T he following compatibility changes have been made since the release of binutils included in Red Hat Enterprise Linux 5.9: T he --add-needed command line option has been renamed to --copy-dt-needed-entries in order to avoid confusion with the --as-needed option. For GNU/Linux systems, the linker no longer processes any relocations made against symbols of the ST T _GNU_IFUNC type. Instead, it emits them into the resulting binary for processing by the loader. Note T he implementation of this feature depends on capabilities only found in newer versions of the glibc library. Consequently, this feature is currently available in Red Hat Developer T oolset for Red Hat Enterprise Linux 6. T he --as-needed command line option has been adapted to link in a dynamic library in the following two cases: if the dynamic library satisfies undefined symbols in regular objects, and if the dynamic library satisfies undefined symbols in other dynamic libraries unless the library is already found in a DT _NEEDED entry of one of the libraries that are already linked. T he -l:file_name command line option now searches the library path for a file name called file_name without adding the .a or .so file extension. 7.2.2. GNU Assembler 7.2.2.1. New Features Changes Since Red Hat Enterprise Linux 6.4 T he following features have been added since the release of binutils included in Red Hat Enterprise Linux 6.4: T he GNU Assembler no longer requires double ampersands in macros. A new --com press-debug-sections command line option has been added to enable compression of DWARF debug information sections in the relocatable output file. Compressed debug sections are currently supported by the readelf, objdum p, and gold tools, but not by ld. Support for .bundle_align_m ode, .bundle_lock, and .bundle_unlock directives for x86 targets has been added.. On x86 architectures, the GNU Assembler now allows rep bsf, rep bsr, and rep ret syntax. Changes Since Red Hat Enterprise Linux 5.9 138 C hapter 7. Red Hat Developer T oolset T he following features have been added since the release of binutils included in Red Hat Enterprise Linux 5.9: GNU/Linux targets now support gnu_unique_object as a value of the .type pseudo operation. T his value can be used to mark a symbol as globally unique in the entire process. Support for the new discriminator column in the DWARF line table with a discriminator operand for the .loc directive has been added. T he .type pseudo operation now accepts a type of ST T _GNU_IFUNC. T his can be used to indicate that if the symbol is the target of a relocation, its value should not be used. Instead, the function should be invoked and its result used as the value. A new pseudo operation .cfi_val_encoded_addr has been added. T his pseudo operation can be used to record constant addresses in unwind tables without runtime relocation. A new command line option -m sse-check=[none|error|warning] has been added for x86 targets. T he -a command line option now accepts g as a valid sub-option. T his combination can be used to enable assembly listings with additional information about the assembly, including the list of supplied command line options or the assembler version. A new command line option -m sse2avx has been added for x86 targets. T his option can be used to encode SSE instructions with VEX prefix. x86 targets now support the Intel XSAVE, EPT , MOVBE, AES, PCLMUL, and AVX/FMA instructions. New command line options -m arch=cpu[,+extension… ], -m tune=cpu, -m m nem onic= [att|intel], -m syntax=[att|intel], -m index-reg, -m naked-reg, and -m old-gcc have been added for x86 targets. New pseudo operations .string16, .string32, and .string64 have been added. T hese pseudo operations be used to generate wide character strings. T he i386 port now supports the SSE5 instruction set. A new pseudo operation .reloc has been added. T his pseudo operation serves as a low-level interface for creating relocations. 7.2.3. Other Binary Tools 7.2.3.1. New Features Changes Since Red Hat Developer T oolset 1.1 T he following features have been added since the release of binutils included in Red Hat Developer T oolset 1.1: A manual page for the dwp utility has been added. T he binary tools now provide support for the AMD Family 15h processors, models 02h and 10-1fh. Changes Since Red Hat Enterprise Linux 6.4 T he following features have been added since the release of binutils included in Red Hat Enterprise Linux 6.4: 139 Red Hat Enterprise Linux 7 Developer Guide T he readelf and objdum p tools can now display the contents of the .debug.m acro sections. New --dwarf-start and --dwarf-end command line options have been added to the readelf and objdum p tools. T hese options are used by the new Emacs mode (see the dwarf-m ode.el file). A new --interleave-width command line option has been added to the objcopy tool to allow the use of the --interleave to copy a range of bytes from the input to the output. A new --dyn-sym s command line option has been added to the readelf tool. T his option can be used to dump dynamic symbol table. A new tool, elfedit, has been added to binutils. T his tool can be used to directly manipulate ELF format binaries. A new command line option --addresses (or -a for short) has been added to the addr2line tool. T his option can be used to display addresses before function and source file names. A new command line option --pretty-print (or -p for short) has been added to the addr2line tool. T his option can be used to produce human-readable output. Support for dwz -m optimized debug information has been added. T he devtoolset-2-binutils-devel package now provides the dem angle.h header file. Changes Since Red Hat Enterprise Linux 5.9 T he following features have been added since the release of binutils included in Red Hat Enterprise Linux 5.9: A new command line option --insn-width=width has been added to the objdum p tool. T his option can be used to specify the number of bytes to be displayed on a single line when disassembling instructions. A new command line option --relocated-dum p=name|number has been added to the readelf tool. T his option can be used to display the relocated contents of a section as a sequence of bytes. A new command line option --external-sym bols-table=filename has been added to the gprof tool. T his option can be used to read a symbol table from a certain file. bfd now supports a plugin target, which can be used to get basic support for new file formats by having the plugin target load the same shared objects used by gold. T he --dwarf (or -W for short) command line option of the objdum p tool has been adapted to be as flexible as the --debug-dum p (or -w) option of readelf. New command line options --prefix=prefix and --prefix-strip=level have been added to the objdum p tool. T hese options can be used to add absolute paths for the --source (or -S for short) option. A new command line option -wL has been added to the readelf tool. T his option can be used to dump decoded contents of the .debug_line section. “T hin” archives are now supported. Instead of containing object files, such archives contain just pathnames pointing to those files. A new command line option -F has been added to the objdum p tool. T his option can be used to include file offsets in the disassembly. 14 0 C hapter 7. Red Hat Developer T oolset A new command line option -c has been added to the readelf tool. T his option can be used to allow string dumps of archive symbol index. T he i386 port now supports the SSE5 instruction set. A new command line option -p has been added to the readelf tool. T his option can be used to allow string dumps of sections. 7.2.3.2. Compatibility Changes Changes Since Red Hat Enterprise Linux 5.9 T he following compatibility changes have been made since the release of binutils included in Red Hat Enterprise Linux 5.9: T he --as-needed command line option has been adapted to link in a dynamic library in the following two cases: if the dynamic library satisfies undefined symbols in regular objects, and if the dynamic library satisfies undefined symbols in other dynamic libraries unless the library is already found in a DT _NEEDED entry of one of the libraries that are already linked. 7.3. Platform Compatibility Red Hat Developer T oolset 2.1 is available for Red Hat Enterprise Linux 5 and 6, both for 32-bit and 64-bit Intel and AMD architectures. Figure 7.1, “Red Hat Developer T oolset 2.1 Compatibility Matrix” illustrates the support for binaries built with Red Hat Developer T oolset on a certain version of Red Hat Enterprise Linux when those binaries are run on various other versions of this system. On the y-axis, find the version of Red Hat Enterprise Linux the binary is being built on, and cross-reference with the version of Red Hat Enterprise Linux the application is being run on. Figure 7.1. Red Hat Developer T oolset 2.1 Compatibility Matrix 7.4. Red Hat Developer Toolset References For more information about Red Hat Developer T oolset 2.1 and what it offers, see the following resources: Red Hat Developer T oolset 2.1 Release Notes — T he Release Notes for Red Hat Developer T oolset 2.1 provides important information available at the time of its release. Read this book to learn about system requirements or known problems of the product. Red Hat Developer T oolset 2.1 User Guide — T he User Guide for Red Hat Developer T oolset 2.1 provides an overview of the product, explains how to invoke and use the Red Hat Developer T oolset versions of the tools, and links to resources with more in-depth information. Read this book to learn how to obtain, install, and use Red Hat Developer T oolset on your system, or for a detailed list of changes in this product. 14 1 Red Hat Enterprise Linux 7 Developer Guide Chapter 8. Red Hat Software Collections For certain applications, a more recent version of some software component is often needed in order to use its latest new features. Red Hat Software Collections is a Red Hat offering that provides a set of dynamic programming languages, database servers, and related packages that are either more recent than their equivalent versions included in the base Red Hat Enterprise Linux system, or are available for this system for the first time. Dynamic languages, database servers, and other tools distributed with Red Hat Software Collections do not replace the default system tools provided with Red Hat Enterprise Linux 6, nor are they used in preference to these tools. T he default versions of Perl and PostgreSQL, for example, remain those provided by the base Red Hat Enterprise Linux system. Users can pick and choose at any time which version of the tool they would like to run by using the scl utility. With the notable exception of Node.js, all Red Hat Software Collections components are fully supported under Red Hat Enterprise Linux Subscription Level Agreements, are functionally complete, and are intended for production use. 8.1. Red Hat Software Collections Features Red Hat Software Collections 1.0 provides recent versions of the tools listed in T able 8.1, “Red Hat Software Collections 1.0 Components”. T able 8.1. Red Hat Software Collections 1.0 Components Component Software Collection Description Perl 5.16.3 perl516 A recent stable release of Perl with a number of additional utilities, scripts, and database connectors for MySQL and PostgreSQL. T his version provides a large number of new features and enhancements, including new debugging options, improved Unicode support, and better performance. PHP 5.4 .14 php54 A recent stable release of PHP with PEAR 1.9.4 and a number of additional utilities. T his version provides new language syntax, a built-in web server for the command line, and improved performance. Python 2.7 python27 A recent stable release of Python with a number of additional utilities and database connectors for MySQL and PostgreSQL. T his version provides various new features and enhancements, including a new ordered dictionary type, faster I/O operations, and improved forward compatibility with Python 3. Python 3.3 python33 A recent stable release of Python 3 with a number of additional utilities and a database connector for PostgreSQL. T his Software Collection gives developers on Red Hat Enterprise Linux 6 access to Python 3 and allows them to test the compatibility of their applications with this version. Ruby 1.9.3 ruby193 A recent stable release of Ruby with Rails 3.2.8 and a large collection of Ruby gems. T his Software Collection gives developers on Red Hat Enterprise Linux 6 access to Ruby 1.9, which provides a number of new features and enhancements, including improved Unicode support, enhanced threading, and faster load times. 14 2 C hapter 8. Red Hat Software Collections Component Software Collection Description MariaDB 5.5 mariadb55 A recent stable release of MariaDB. T his Software Collection gives users of Red Hat Enterprise Linux 6 an alternative to MySQL, which is binary compatible with MariaDB and can be replaced with it without any data conversions. MySQL 5.5 mysql55 A recent stable release of MySQL. T his version provides a number of new features and enhancements, including improved performance. PostgreSQL 9.2 postgresql92 A recent stable release of PostgreSQL. T his version provides a number of new features and enhancements, including native JSON support, improved scalability, and better performance. Node.js 0.10 [a] nodejs010 A recent stable release of Node.js. T his Software Collection gives users of Red Hat Enterprise Linux 6 access to this programming platform. [a] In Red Hat So ftware Co llec tio ns 1.0 , Node.js is inc lud ed as a Tec hno lo g y Preview. Fo r mo re info rmatio n ab o ut Red Hat Tec hno lo g y Previews , s ee http s ://ac c es s .red hat.c o m/s up p o rt/o ffering s /tec hp review/. 8.2. Platform Compatibility Red Hat Software Collections 1.0 is available for the following versions of the Red Hat Enterprise Linux system on AMD64 and Intel 64 architectures: Red Hat Enterprise Linux 6.2 Extended Update Support Red Hat Enterprise Linux 6.3 Extended Update Support Red Hat Enterprise Linux 6.4 8.3. Red Hat Software Collections Use T o run an executable from a particular Software Collection, type the following command at a shell prompt: scl enable software_collection... 'command...' Replace software_collection with a space-separated list of Software Collections you want to use and command with the command you want to run. For example, to execute a Perl program stored in a file named hello.pl with the Perl interpreter from the perl516 Software Collection, type: ~]$ scl enable perl516 'perl hello.pl' Hello, World! T o start a new shell session with executables from a selected Software Collection in preference to their Red Hat Enterprise Linux equivalents, type the following at a shell prompt: scl enable software_collection... bash Replace software_collection with a space-separated list of Software Collections you want to use. For example, to start a new shell session with the python27 and postgresql92 Software Collections as default, type: ~]$ scl enable python27 postgresql92 bash 14 3 Red Hat Enterprise Linux 7 Developer Guide T he list of Software Collections that are enabled in the current session is stored in the $X_SCLS environment variable, for instance: ~]$ echo $X_SCLS python27 postgresql92 You can execute any command using the scl utility, causing it to be run with the executables from a selected Software Collection in preference to their possible Red Hat Enterprise Linux system equivalents. See Section 4.7, “Software Collections and scl-utils” for more information on how to install and use this command line utility on your system. For a complete list of Software Collections that are distributed with Red Hat Software Collections, see T able 8.1, “Red Hat Software Collections 1.0 Components”. For detailed instructions on how to use these Software Collections, see the Red Hat Software Collections 1.0 Release Notes. 8.4. Deploy Applications That Use Red Hat Software Collections In general, you can use one of the following two approaches to deploy an application that depends on a component from Red Hat Software Collections in production: install all required Software Collections and packages manually and then deploy your application, or create a new Software Collection for your application and specify all required Software Collections and other packages as dependencies. For more information on how to manually install individual Red Hat Software Collections components, see the Red Hat Software Collections 1.0 Release Notes. For a detailed explanation of how to create a custom Software Collection, read the Red Hat Developer Toolset Software Collections Guide. 8.5. Where to Find More Information? Red Hat Software Collections 1.0 Release Notes — T he Release Notes for Red Hat Software Collections 1.0 provides important information available at the time of its release. Read this book if you want to learn about system requirements or known problems of the product. 14 4 C hapter 9. Documentation T ools Chapter 9. Documentation Tools Red Hat Enterprise Linux 6 has two documentation tools available to include documentation with a project. T hese are Publican and Doxygen. 9.1. Publican Publican a program is used to publish and process documentation through DocBook XML. In the process of publishing books, it checks the XML to ensure it is valid and in a publishable standard. It is particularly useful for publishing the documentation accompanying a newly created application. 9.1.1. Commands Publican has a vast number of commands and actions available, all of which can be found in the --help or --m an pages. T he most common ones are: build Converts the XML files into other formats more suitable for documentation (PDF, HT ML, HT MLsingle, for example). create Creates a new book, including all the required files as discussed in Section 9.1.3, “Files”. create_brand Creates a new brand, allowing all books to look the same, as discussed in Section 9.1.6, “Brands”. package Packages the files of a book into an RPM ready to distribute. 9.1.2. Create a New Document Use the publican create command to create a new document including all the required files. T here are a number of options available to append to the publican create. T hese are: --help Prints a list of accepted options for the publican create command. --nam e Doc_Name Set the name of the book. Keep in mind that the title must contain no spaces. --lang Language_Code If this is not set, the default is en-US. T he --lang option sets the xm l_lang in the publican.cfg file and creates a directory with this name in the document directory. --version version Set the version number of the product the book is about. --product Product_Name 14 5 Red Hat Enterprise Linux 7 Developer Guide Set the name of the product the book is about. Keep in mind that this must contain no spaces. --brand brand Set the name of a brand to use to keep the look of the documents consistent. Refer to --help for more options. Remember to change into the directory the book is to be created in before running publican create. T his prevents the files and directories be added to the user's home directory. 9.1.3. Files When a book is made, a number of files are created in the book's directory. T hese files are required for the book to be built properly and should not be deleted. T hey are, however, required to be edited for links (such as chapters) to work, as well as to contain the correct information regarding authors and titles etc. T hese files are: publican.cfg T his file configures the build options and always includes the parameters xml_lang (the language the book is in, en-US for example), type (the type of document, a book or a set, for example), and brand (the branding the document uses, found here: Section 9.1.6, “Brands”. Red Hat, for example.). T here are a number of optional parameters but these should be used cautiously as they can cause problems further on in areas like translation. A full list of these advanced parameters can be found in the Publican User Guide. T he publican.cfg file is unlikely to be edited much beyond the initial creation. book_info.xm l T his file is the template of the book. It contains information such as the title, subtitle, author, publication number, and the book's ID number. It also contains the basic Publican information printed at the beginning of each publication with information on the notes, cautions, and warnings as well as a basic stylistic guide. T his file will be edited often as every time a book is updated the publication number has to be incremented. Author_Group.xm l T his file is used to store information about the authors and contributors. Once initially set up it is unlikely further editing will be required unless a change of authorship occurs. Chapter.xm l T his file is an example of what the actual content will be. It is created as a place holder but unless it is linked in the Doc_Name.xml (below) it will not appear in the actual book. When writing content for the publication, new XML files are created, named appropriately (ch-publican.xml, for example) and linked in Doc_Nam e.xm l. When the book is built, the content of this file will form the content of the book. T his specific file is unlikely to ever be edited but others like it will be edited constantly as content is changed, updated, added to or removed. Doc_Name.xm l T his file is the contents page of the publication. It contains a list of links to the various chapters a book is to contain. It will not actually be called 'Doc_Name' but will have whatever the title of the publication is in it's place (Developer_Guide.xml, for example). T his will only be edited when new chapters are added, removed or rearranged. T his must remain the same as Doc_Name.ent or the book will not build. 14 6 C hapter 9. Documentation T ools Doc_Name.ent T his file contains a list of local entities. By default YEAR is set to the current year and HOLDER has a reminder to place the copyright owner's name there. As with Doc_Name.xm l, this file will not be called 'Doc_Name' but will be replaced with the title of the document (Developer_Guide.ent, for example). T his is only likely to be edited once at the beginning of publication or if the copyright owner changes. T his must remain the same as Doc_Name.xm l or the book will not build. Revision_History.xm l When publican package is run, the first XML file containing a <revhistory> tag is used to build the RPM revision history. 9.1.3.1. Adding Media to Documentation Occasionally it may become necessary to add various media to a document in order to illustrate what is being explained. Images T he im ages folder is created by publican in the document's directory. Store any images used in the document here. T hen when entering an image into the document, link to the image inside the im ages directory (./im ages/im age1.png, for example). Code Examples As time passes and technology changes, a project's documentation will be required to be updated to reflect differences in code. T o make this easier, create individual files for each code example in a preferred editor, then save them in a folder called extras in the document's directory. T hen, when entering the code sample into the document, link to the file and the folder it is in. T his way an example used in several places can be updated only once, and rather than search through a document looking for a specific item to change, all the code examples are located in the one place, saving time and effort. Arbitrary Files On occasion there may be a requirement for files not attached to the documentation to be bundled with the RPM (video tutorials, for example). Adding these files to a directory called files in the publication's directory will allow them to be added to the RPM when the book is compiled. T o link to any of these files, use the following XML: <xi:include parse="text" href="extras/fork/fork1.c" xmlns:xi="http://www.w3.org/2001/XInclude" /> 9.1.4. Building a Document In the root directory, first run a test build to ensure that all the XML is correct and acceptable by typing publican build --form ats=chosen_format --langs=chosen_language. For example, to build a document in US English and as a single HT ML page, run publican build --form ats=htm lsingle --langs=en-US. Provided there are no errors the book will be built into the root directory where the pages can be viewed to see if it has the look required. It is recommended to do this regularly in order to make troubleshooting as easy as possible. 14 7 Red Hat Enterprise Linux 7 Developer Guide Note When creating a build to test for any bugs in the XML code, sometimes it may be useful to use the -novalid option. T his skips over any cross-references and links that point to files or sections of the document that do not yet exist. Instead they are shown as three question marks (???). T here are a number of different formats a document can be published in. T hese are: html An ordinary HT ML page with links to new pages for new chapters and sections. html-single One long HT ML page where the links to new chapters and sections at the top of the page directing the user further down the page, rather than to new page. html-desktop One long HT ML page where the links to new chapters and sections are in a panel on the left side of the document, directing the user further down the page, rather than to a new page. man A man page for Linux, UNIX, and other similar operating systems. pdf A PDF file. test T he XML is validated without actually creating a file for viewing. txt A single text file. epub An e-book in EPUB format. eclipse An Eclipse help plug-in. 9.1.5. Packaging a Publication Once the documentation is complete and can be built with no errors, run publican package -lang=chosen_language. T his will output SRPM packages to tm p/rpm in the document's directory, and binary RPM packages will go to tm p/rpm /noarch in the document's directory. By default, these packages are named productname-title-productnumber-[web]-language-edition-pubsnumber. [build_target].noarch.file_extension with the information for each of these sections coming from publican.cfg. 9.1.6. Brands 14 8 C hapter 9. Documentation T ools Brands are used in a similar way as templates in that they create a level of consistency in appearance, with aspects like matching logos, images and color schemes, across a range of documents. T his can be particularly useful when producing several books for the same application or the same bundle of applications. In order to create a new brand, it must have a name and a language. Run publican create_brand -nam e=brand --lang=language_code. T his will create a folder called publican-brand and place it in the publication's directory. T his folder contains the following files: COPYING Part of an SRPM package and containing the copyright license and details. defaults.cfg Provides default values for the parameters that can be set in publican.cfg. Specifications from this file are applied first before applying those in the publican.cfg file. T herefore, values in the publican.cfg file override those in the defaults.cfg file. It is best used for aspects that are routinely used throughout the documents but still allows writers to change settings. overrides.cfg Also provides values for the parameters that can be set in publican-brand.spec. Specifications from this file are applied last, thus overriding both the defaults.cfg and the publican.cfg. It is best used for aspects the writers are not allowed to change. publican.cfg T his file is similar to the publican.cfg file for a publication in that it configures basic information for the brand, such as version, release number and brand name. publican-brand.spec T his file is used by the RPM Package Manager to package the publication into an RPM. README Part of an SRPM package and providing a brief description of the package. A subdirectory, named by the language code, is also placed in this directory and contains the following files: Feedback.xm l T his is generated by default to allow readers to leave feedback. Customize it to contain the relevant contact details or a bug reporting process. Legal_Notice.xm l: Contains copyright information. Edit it to change the details of the chosen copyright license. T wo more subdirectories are within this directory. T he im ages subdirectory contains a number of images of both raster (PNG) and vector (SVG) formats and serve as place holders for various navigation icons that can be changed by replacing the images. T he css folder contains overrides.css, which sets the visual style for the brand, overriding those in com m on.css. 14 9 Red Hat Enterprise Linux 7 Developer Guide In order to package the new brand ready for distribution, use the publican package command. By default this creates source RPM packages (SRPM Packages) but it can also create binary RPM packages using the option --binary. Packages are named publican-brand-version-release. [build_target].[noarch].file_extension with the required parameters taken from the publican.cfg file. Note SRPM packages have the file extension .src.rpm while binary RPM packages have the file extension .rpm Binary RPM packages include [build_target].noarch before the file extension, where [build_target] represents the operating system and version that the package is built for as set by the os_ver parameter in the publican.cfg file. T he noarch element specifies that the package can be installed on any system, regardless of the system architecture. 9.1.7. Building a Website Publican can also build websites to manage documentation. T his is mostly useful when only one person is maintaining the documentation, but where a team is working on the documentation Publican can generate RPM packages of documentation to install on a web server. T he website created consists of a homepage, product and version description pages, and the pages for the documentation. In the publication's root directory, Publican creates a configuration file, an SQLite database file, and two subdirectories. T here could be many configuration files depending on how many languages the documentation is published in, with a new subdirectory for each language. Refer to Section 9.1.8, “Documentation” for more information. 9.1.8. Documentation Publican has comprehensive --m an, --help and --help_actions pages accessed from the terminal. For information on XML including the different tags available, see the DocBook guide, DocBook: the definitive guide by Norman Walsh and Leonard Muellner, found here: http://www.docbook.org/tdg/en/html/docbook and specifically Part II: Reference for a list of all the tags and brief instructions on how to use them. T here is also the comprehensive Publican User Guide accessed online at http://jfearn.fedorapeople.org/en-US/index.html or installed locally with yum install publican-doc. 9.2. Doxygen Doxygen is a documentation tool that creates reference material both online in HT ML and offline in Latex. It does this from a set of documented source files which makes it easy to keep the documentation consistent and correct with the source code. 9.2.1. Doxygen Supported Output and Languages Doxygen has support for output in: RT F (MS Word) PostScript 150 C hapter 9. Documentation T ools Hyperlinked PDF Compressed HT ML Unix man pages Doxygen supports the following programming languages: C C++ C# Objective -C IDL Java VHDL PHP Python Fortran D 9.2.2. Getting Started Doxygen uses a configuration file to determine its settings, therefore it is paramount that this be created correctly. Each project requires its own configuration file. T he most painless way to create the configuration file is with the command doxygen -g config-file. T his creates a template configuration file that can be easily edited. T he variable config-file is the name of the configuration file. If it is committed from the command it is called Doxyfile by default. Another useful option while creating the configuration file is the use of a minus sign (-) as the file name. T his is useful for scripting as it will cause Doxygen to attempt to read the configuration file from standard input (stdin). T he configuration file consists of a number of variables and tags, similar to a simple Makefile. For example: T AGNAME = VALUE1 VALUE2... For the most part these can be left alone but should it be required to edit them refer to the configuration page of the Doxygen documentation website for an extensive explanation of all the tags available. T here is also a GUI interface called doxywizard. If this is the preferred method of editing then documentation for this function can be found on the Doxywizard usage page of the Doxygen documentation website. T here are eight tags that are useful to become familiar with. INPUT For small projects consisting mainly of C or C++ source and header files it is not required to change anything. However, if the project is large and consists of a source directory or tree, then assign the root directory or directories to the INPUT tag. FILE_PAT T ERNS 151 Red Hat Enterprise Linux 7 Developer Guide File patterns (for example, * .cpp or * .h) can be added to this tag allowing only files that match one of the patterns to be parsed. RECURSIVE Setting this to yes will allow recursive parsing of a source tree. EXCLUDE and EXCLUDE_PAT T ERNS T hese are used to further fine-tune the files that are parsed by adding file patterns to avoid. For example, to omit all test directories from a source tree, use EXCLUDE_PAT T ERNS = * /test/* . EXT RACT _ALL When this is set to yes, doxygen will pretend that everything in the source files is documented to give an idea of how a fully documented project would look. However, warnings regarding undocumented members will not be generated in this mode; set it back to no when finished to correct this. SOURCE_BROWSER and INLINE_SOURCES By setting the SOURCE_BROWSER tag to yes doxygen will generate a cross-reference to analyze a piece of software's definition in its source files with the documentation existing about it. T hese sources can also be included in the documentation by setting INLINE_SOURCES to yes. 9.2.3. Running Doxygen Running doxygen config-file creates htm l, rtf, latex, xm l, and / or m an directories in whichever directory doxygen is started in, containing the documentation for the corresponding filetype. HT ML OUT PUT T his documentation can be viewed with a HT ML browser that supports cascading style sheets (CSS), as well as DHT ML and Javascript for some sections. Point the browser (for example, Mozilla, Safari, Konqueror, or Internet Explorer 6) to the index.htm l in the htm l directory. LaT eX OUT PUT Doxygen writes a Makefile into the latex directory in order to make it easy to first compile the Latex documentation. T o do this, use a recent teT eX distribution. What is contained in this directory depends on whether the USE_PDFLAT EX is set to no. Where this is true, typing m ake while in the latex directory generates refm an.dvi. T his can then be viewed with xdvi or converted to refm an.ps by typing m ake ps. Note that this requires dvips. T here are a number of commands that may be useful. T he command m ake ps_2on1 prints two pages on one physical page. It is also possible to convert to a PDF if a ghostscript interpreter is installed by using the command m ake pdf. Another valid command is m ake pdf_2on1. When doing this set PDF_HYPERLINKS and USE_PDFLAT EX tags to yes as this will cause Makefile will only contain a target to build refm an.pdf directly. RT F OUT PUT T his file is designed to import into Microsoft Word by combining the RT F output into a single file: refm an.rtf. Some information is encoded using fields but this can be shown by selecting all (CT RL+A or Edit -> select all) and then right-click and select the toggle fields option from the drop down menu. XML OUT PUT 152 C hapter 9. Documentation T ools T he output into the xm l directory consists of a number of files, each compound gathered by doxygen, as well as an index.xm l. An XSLT script, com bine.xslt, is also created that is used to combine all the XML files into a single file. Along with this, two XML schema files are created, index.xsd for the index file, and com pound.xsd for the compound files, which describe the possible elements, their attributes, and how they are structured. MAN PAGE OUT PUT T he documentation from the m an directory can be viewed with the m an program after ensuring the m anpath has the correct man directory in the man path. Be aware that due to limitations with the man page format, information such as diagrams, cross-references and formulas will be lost. 9.2.4. Documenting the Sources T here are three main steps to document the sources. 1. First, ensure that EXT RACT _ALL is set to no so warnings are correctly generated and documentation is built properly. T his allows doxygen to create documentation for documented members, files, classes and namespaces. 2. T here are two ways this documentation can be created: A special documentation block T his comment block, containing additional marking so Doxygen knows it is part of the documentation, is in either C or C++. It consists of a brief description, or a detailed description. Both of these are optional. What is not optional, however, is the in body description. T his then links together all the comment blocks found in the body of the method or function. Note While more than one brief or detailed description is allowed, this is not recommended as the order is not specified. T he following will detail the ways in which a comment block can be marked as a detailed description: C-style comment block, starting with two asterisks (*) in the JavaDoc style. /** * ... documentation ... */ C-style comment block using the Qt style, consisting of an exclamation mark (!) instead of an extra asterisk. /*! * ... documentation ... */ T he beginning asterisks on the documentation lines can be left out in both cases if that is preferred. 153 Red Hat Enterprise Linux 7 Developer Guide A blank beginning and end line in C++ also acceptable, with either three forward slashes or two forward slashes and an exclamation mark. /// /// ... documentation /// or //! //! ... documentation ... //! Alternatively, in order to make the comment blocks more visible a line of asterisks or forward slashes can be used. ///////////////////////////////////////////////// /// ... documentation ... ///////////////////////////////////////////////// or /********************************************//** * ... documentation ... ***********************************************/ Note that the two forwards slashes at the end of the normal comment block start a special comment block. T here are three ways to add a brief description to documentation. T o add a brief description use \brief above one of the comment blocks. T his brief section ends at the end of the paragraph and any further paragraphs are the detailed descriptions. /*! \brief brief documentation. * brief documentation. * * detailed documentation. */ By setting JAVADOC_AUT OBRIEF to yes, the brief description will only last until the first dot followed by a space or new line. Consequentially limiting the brief description to a single sentence. /** Brief documentation. Detailed documentation continues * from here. */ T his can also be used with the above mentioned three-slash comment blocks (///). T he third option is to use a special C++ style comment, ensuring this does not span more than one line. /// Brief documentation. /** Detailed documentation. */ 154 C hapter 9. Documentation T ools or //! Brief documentation. //! Detailed documentation //! starts here T he blank line in the above example is required to separate the brief description and the detailed description, and JAVADOC_AUT OBRIEF must to be set to no. Examples of how a documented piece of C++ code using the Qt style can be found on the Doxygen documentation website It is also possible to have the documentation after members of a file, struct, union, class, or enum. T o do this add a < marker in the comment block.\ int var; /*!< detailed description after the member */ Or in a Qt style as: int var; /**< detailed description after the member */ or int var; //!< detailed description after the member //!< or int var; ///< detailed description after the member ///< For brief descriptions after a member use: int var; //!< brief description after the member or int var; ///< brief description after the member Examples of these and how the HT ML is produced can be viewed on the Doxygen documentation website Documentation at other places While it is preferable to place documentation in front of the code it is documenting, at times it is only possible to put it in a different location, especially if a file is to be documented; after all it is impossible to place the documentation in front of a file. T his is best avoided unless it is absolutely necessary as it can lead to some duplication of information. T o do this it is important to have a structural command inside the documentation block. Structural commands start with a backslash (\) or an at-sign (@) for JavaDoc and are followed by one or more parameters. 155 Red Hat Enterprise Linux 7 Developer Guide /*! \class Test \brief A test class. A more detailed description of class. */ In the above example the command \class is used. T his indicates that the comment block contains documentation for the class 'T est'. Others are: \struct: document a C-struct \union: document a union \enum : document an enumeration type \fn: document a function \var: document a variable, typedef, or enum value \def: document a #define \typedef: document a type definition \file: document a file \nam espace: document a namespace \package: document a Java package \interface: document an IDL interface 3. Next, the contents of a special documentation block is parsed before being written to the HT ML and / Latex output directories. T his includes: a. Special commands are executed. b. Any white space and asterisks (*) are removed. c. Blank lines are taken as new paragraphs. d. Words are linked to their corresponding documentation. Where the word is preceded by a percent sign (%) the percent sign is removed and the word remains. e. Where certain patterns are found in the text, links to members are created. Examples of this can be found on the automatic link generation page on the Doxygen documentation website. f. When the documentation is for Latex, HT ML tags are interpreted and converted to Latex equivalents. A list of supported HT ML tags can be found on the HTML commands page on the Doxygen documentation website. 9.2.5. Resources More information can be found on the Doxygen website. Doxygen homepage Doxygen introduction Doxygen documentation 156 C hapter 9. Documentation T ools Output formats 157 Red Hat Enterprise Linux 7 Developer Guide Appendix A.1. mallopt m allopt is a library call that allows a program to change the behavior of the malloc memory allocator. Example A.1. Allocator heuristics An allocator has heuristics to determine long versus short lived objects. For the former, it attempts to allocate with m m ap. For the later, it attempts to allocate with sbrk. In order to override these heuristics, set M_MMAP_T HRESHOLD. In multi-threaded applications, the allocator creates multiple arenas in response to lock contention in existing arenas. T his can improve the performance significantly for some multi-threaded applications at the cost of an increase in memory usage. T o keep this under control, limit the number of arenas that can be created by using the m allopt interface. T he allocator has limits on the number of arenas it can create. For 32bit targets, it will create 2 * # core arenas; for 64bit targets, it will create 8 * # core arenas. m allopt allows the developer to override those limits. Example A.2. m allopt T o ensure no more than eight arenas are created, issue the following library call: mallopt (M_ARENA_MAX, 8); T he first argument for m allopt can be: M_MXFAST M_T RIM_T HRESHOLD M_T OP_PAD M_MMAP_T HRESHOLD M_MMAP_MAX M_CHECK_ACT ION M_PERT URB M_ARENA_T EST M_ARENA_MAX Specific definitions for the above can be found at http://www.makelinux.net/man/3/M/mallopt. malloc_trim 158 malloc_stats m alloc_trim is a library call that requests the allocator return any unused memory back to the operating system. T his is normally automatic when an object is freed. However, in some cases when freeing small objects, glibc might not immediately release the memory back to the operating system. It does this so that the free memory can be used to satisfy upcoming memory allocation requests as it is expensive to allocate from and release memory back to the operating system. malloc_stats m alloc_stats is used to dump information about the allocator's internal state to stderr. Using m allinfo is similar to this, but it places the state into a structure instead. Further Information More information on m allopt can be found at http://www.makelinux.net/man/3/M/mallopt and http://www.gnu.org/software/libc/manual/html_node/Malloc-T unable-Parameters.html. 159 Red Hat Enterprise Linux 7 Developer Guide Revision History Revision 1-3 T ue Jul 22 2014 Updated glibc section for Red Hat Enterprise Linux 7 BZ #1076340 Jacquelynn East Revision 1-1 Fixed broken links. Wed Jun 11 2014 Jacquelynn East Revision 1-0 Version for 7.0 GA release Mon Jun 2 2014 Jacquelynn East Revision 0-33 Wed May 21 2014 Added url to bug in oprofile section BZ #795987 Jacquelynn East Revision 0-32 Rebuild for style changes Jacquelynn East Mon Apr 12 2014 Revision 0-21 T ue Apr 8 2014 Jacquelynn East New features added to the java section BZ #795590 Important note in btrfs has been edited to reflect tech preview status BZ #1025572 Revision 0-20 Mon Apr 7 2014 Jacquelynn East Added sentence stating RHEL7 constantly updated for latest JDK version BZ #911433 Updated SystemT ap chapter BZ #795980 Updated GCC and DT S sections BZ #1032615 Added GCC power defaults BZ #1009827 Revision 0-18 Fri Apr 4 2014 Laura Bailey Added operf command to OProfile section and made minor corrections for BZ #1048636. Revision 0-17 T hu Apr 3 2014 Jacquelynn East Added section on writing plug-ins for the libStorageMgmt library BZ #795222 Revision 0-16 Fri Mar 14 2014 Updated the DT S chapter BZ #1026417 Jacquelynn East Revision 0-15 Mon Feb 3 2014 Several minor edits to perl section BZ #795583 Jacquelynn East Revision 0-13 Fri Jan 10 2014 Updated oProfile section BZ #795987 Jacquelynn East Revision 0-12 Wed Nov 27 2013 Updated python section to Python 2.7 BZ #795585 Updated perl section to Perl 5.16 BZ #795583 Updated ruby section to Ruby 1.9 BZ #795629 and BZ #795631 Jacquelynn East Revision 0-9 Pre beta build Wed Nov 27 2013 Jacquelynn East Revision 0-7 Wed Oct 2 2013 Jacquelynn East 160 Index Changed references to /bin, /sbin, /lib, /lib64 to be nested under /usr BZ #952479 Revision 0-6 Mon Sep 23 2013 Jacquelynn East Added important note regarding a possible memcpy failure BZ #836490 Revision 0-5 Wed Sep 11 2013 Branch for Red Hat Enterprise Linux 7.0. Jacquelynn East Index Symbols .spec file - specfile Editor - compiling and building, Eclipse RPM Building, Eclipse Built-in Specfile Editor A ABI - compatibility, ABI Compatibility addr2line - features, New Features advantages - Python pretty-printers - debugging, Python Pretty-Printers Akonadi - KDE Development Framework - libraries and runtime support, KDE4 Architecture Apache Subversion (SVN) - Collaborating, Apache Subversion (SVN) - Committing changes, Committing Changes - Documentation, SVN Documentation - Importing data, Importing Data - Installation, Installation - SVN Repository, SVN Repository - Working Copies, Working Copies application binary interface (see ABI) architecture, KDE4 - KDE Development Framework - libraries and runtime support, KDE4 Architecture authorizing compile servers for connection - SSL and certificate management - SystemT ap, Authorizing Compile Servers for Connection automatic authorization - SSL and certificate management - SystemT ap, Automatic Authorization 161 Red Hat Enterprise Linux 7 Developer Guide Autotools - compiling and building, Autotools B backtrace - tools - GNU debugger, Simple GDB bfd - features, New Features binutils - version, Red Hat Developer T oolset Features Boost - libraries and runtime support, Boost boost-doc - Boost - libraries and runtime support, Boost Documentation breakpoint - fundamentals - GNU debugger, Simple GDB breakpoints (conditional) - GNU debugger, Conditional Breakpoints build-id - compiling and building, build-id Unique Identification of Binaries building - compiling and building, Compiling and Building C C++ Standard Library, GNU - libraries and runtime support, T he GNU C++ Standard Library C++0x, added support for - GNU C++ Standard Library - libraries and runtime support, GNU C++ Standard Library Updates C++11 (see GNU Compiler Collection) C/C++ source code - Eclipse, Editing C/C++ Source Code in Eclipse C11 (see GNU Compiler Collection) cachegrind - tools - Valgrind, Valgrind T ools 162 Index callgrind - tools - Valgrind, Valgrind T ools CDT in Eclipse - Compiling and building, CDT in Eclipse - Compiling and Building - Autotools Project, Autotools Project - Managed Make Project, Managed Make Project - Standard Make Project, Standard Make Project certificate management - SSL and certificate management - SystemT ap, SSL and Certificate Management Code Completion - libhover - libraries and runtime support, Setup and Usage Collaborating, Collaborating - Apache Subversion (SVN), Apache Subversion (SVN) - Committing changes, Committing Changes - Documentation, SVN Documentation - Importing data, Importing Data - Installation, Installation - SVN Repository, SVN Repository - Working Copies, Working Copies - Concurrent Versions System (CVS), Concurrent Versions System (CVS) Command Group Availability T ab - integrated development environment - Eclipse, Customize Perspective commands - fundamentals - GNU debugger, Simple GDB - profiling - Valgrind, Valgrind T ools - tools - Performance Counters for Linux (PCL) and perf, Perf T ool Commands commonly-used commands - Autotools - compiling and building, Autotools compat-glibc - libraries and runtime support, compat-glibc compatibility - GNU Compiler Collection, Language Compatibility, Compatibility Changes, Fortran 2003 Compatibility, Fortran 2008 Compatibility, Fortran 77 Compatibility, ABI Compatibility, Debugging Compatibility, Other Compatibility 163 Red Hat Enterprise Linux 7 Developer Guide - libraries and runtime support, Compatibility compile server - SystemT ap, SystemT ap Compile Server compiling and building - Autotools, Autotools - commonly-used commands, Autotools - configuration script, Configuration Script - documentation, Autotools Documentation - plug-in for Eclipse, Autotools Plug-in for Eclipse - templates (supported), Autotools Plug-in for Eclipse - build-id, build-id Unique Identification of Binaries distributed compiling, Distributed Compiling GNU Compiler Collection, GNU Compiler Collection (GCC) introduction, Compiling and Building required packages, Distributed Compiling specfile Editor, Eclipse RPM Building, Eclipse Built-in Specfile Editor - plug-in for Eclipse, Eclipse RPM Building, Eclipse Built-in Specfile Editor Compiling and building - CDT in Eclipse, CDT in Eclipse Compiling and Building - CDT in Eclipse - Autotools Project, Autotools Project - Managed Make Project, Managed Make Project - Standard Make Project, Standard Make Project Concurrent Versions System (CVS) - Collaborating, Concurrent Versions System (CVS) conditional breakpoints - GNU debugger, Conditional Breakpoints configuration script - Autotools - compiling and building, Configuration Script configuring keyboard shortcuts - integrated development environment - Eclipse, Keyboard Shortcuts connection authorization (compile servers) - SSL and certificate management - SystemT ap, Authorizing Compile Servers for Connection Console View - user interface - Eclipse, Eclipse User Interface Contents (Help Contents) - Help system 164 Index - Eclipse, Eclipse Documentation continue - tools - GNU debugger, Simple GDB Customize Perspective Menu - integrated development environment - Eclipse, Customize Perspective D debugfs file system - profiling - ftrace, ftrace debugging - debuginfo-packages, Installing Debuginfo Packages - installation, Installing Debuginfo Packages - GNU debugger, GDB - fundamental mechanisms, GDB - GDB, GDB - requirements, GDB - introduction, Debugging - Python pretty-printers, Python Pretty-Printers - advantages, Python Pretty-Printers - debugging output (formatted), Python Pretty-Printers - documentation, Python Pretty-Printers - pretty-printers, Python Pretty-Printers - variable tracking at assignments (VT A), Variable T racking at Assignments Debugging - Debugging C/C++ applications with Eclipse, Debugging C/C++ Applications with Eclipse debugging a Hello World program - usage - GNU debugger, Running GDB Debugging C/C++ applications with Eclipse - Debugging, Debugging C/C++ Applications with Eclipse debugging output (formatted) - Python pretty-printers - debugging, Python Pretty-Printers debuginfo-packages - debugging, Installing Debuginfo Packages default - user interface - Eclipse, Eclipse User Interface 165 Red Hat Enterprise Linux 7 Developer Guide distributed compiling - compiling and building, Distributed Compiling documentation - Autotools - compiling and building, Autotools Documentation - Boost - libraries and runtime support, Boost Documentation - GNU C++ Standard Library - libraries and runtime support, GNU C++ Standard Library Documentation - GNU debugger, GDB Documentation - Java - libraries and runtime support, Java Documentation - KDE Development Framework - libraries and runtime support, kdelibs Documentation - OProfile - profiling, OProfile Documentation - Perl - libraries and runtime support, Perl Documentation - profiling - ftrace, ftrace Documentation - Python - libraries and runtime support, Python Documentation - Python pretty-printers - debugging, Python Pretty-Printers - Qt - libraries and runtime support, Qt Library Documentation - Ruby - libraries and runtime support, Ruby Documentation - SystemT ap - profiling, SystemT ap Documentation - Valgrind - profiling, Valgrind Documentation Documentation - Doxygen, Doxygen - Docment sources, Documenting the Sources - Getting Started, Getting Started - Resources, Resources - Running Doxygen, Running Doxygen - Supported output and languages, Doxygen Supported Output and Languages Documentation T ools, Documentation T ools - Publican, Publican - Adding media to documentation, Adding Media to Documentation 166 Index - Brands, Brands Building a document, Building a Document Building a website, Building a Website Commands, Commands Create a new document, Create a New Document Files, Files Packaging a publication, Packaging a Publication Publican documentation, Documentation Doxygen - Documentation, Doxygen - document sources, Documenting the Sources - Getting Started, Getting Started - Resources, Resources - Running Doxygen, Running Doxygen - Supported output and languages, Doxygen Supported Output and Languages dwz - version, Red Hat Developer T oolset Features Dynamic Help - Help system - Eclipse, Eclipse Documentation Dyninst - version, Red Hat Developer T oolset Features E Eclipse - C/C++ source code, Editing C/C++ Source Code in Eclipse - Documentation, Eclipse Documentation - Help system, Eclipse Documentation - Contents (Help Contents), Eclipse Documentation - Dynamic Help, Eclipse Documentation - Menu (Help Menu), Eclipse Documentation - Workbench User Guide, Eclipse Documentation - integrated development environment, Eclipse User Interface - Command Group Availability T ab, Customize Perspective - configuring keyboard shortcuts, Keyboard Shortcuts - Customize Perspective Menu, Customize Perspective - IDE (integrated development environment), Eclipse User Interface - Keyboard Shortcuts Menu, Keyboard Shortcuts - menu (Main Menu), Eclipse User Interface - Menu Visibility T ab, Customize Perspective - perspectives, Eclipse User Interface - Quick Access Menu, T he Quick Access Menu - Shortcuts T ab, Customize Perspective - T ool Bar Visibility, Customize Perspective - user interface, Eclipse User Interface - workbench, Eclipse User Interface - introduction, Eclipse Development Environment - Java Development, Editing Java Source Code in Eclipse - libhover plug-in, libhover Plug-in 167 Red Hat Enterprise Linux 7 Developer Guide - profiling, Valgrind Plug-in for Eclipse - projects, Starting an Eclipse project - New Project Wizard, Starting an Eclipse project - technical overview, Starting an Eclipse project - workspace (overview), Starting an Eclipse project - Workspace Launcher, Starting an Eclipse project - Quick Access Menu, T he Quick Access Menu RPM Building, Eclipse RPM Building User Interface, Eclipse User Interface user interface - Console View, Eclipse User Interface - default, Eclipse User Interface - Editor, Eclipse User Interface - Outline Window, Eclipse User Interface - Problems View, Eclipse User Interface - Project Explorer, Eclipse User Interface - quick fix (Problems View), Eclipse User Interface - T asks Properties, Eclipse User Interface - T asks View, Eclipse User Interface - tracked comments, Eclipse User Interface - View Menu (button), Eclipse User Interface - version, Red Hat Developer T oolset Features Editor - user interface - Eclipse, Eclipse User Interface elfedit - features, New Features elfutils - version, Red Hat Developer T oolset Features execution (forked) - GNU debugger, Forked Execution F finish - tools - GNU debugger, Simple GDB forked execution - GNU debugger, Forked Execution formatted debugging output - Python pretty-printers - debugging, Python Pretty-Printers framework (ftrace) - profiling - ftrace, ftrace 168 Index ftrace - profiling, ftrace - debugfs file system, ftrace - documentation, ftrace Documentation - framework (ftrace), ftrace - usage, Using ftrace function tracer - profiling - ftrace, ftrace fundamental commands - fundamentals - GNU debugger, Simple GDB fundamental mechanisms - GNU debugger - debugging, GDB fundamentals - GNU debugger, Simple GDB G gcc - GNU Compiler Collection - compiling and building, GNU Compiler Collection (GCC) GDB - GNU debugger - debugging, GDB Git - version, Red Hat Developer T oolset Features GNOME Power Manager - libraries and runtime support, GNOME Power Manager gnome-power-manager - GNOME Power Manager - libraries and runtime support, GNOME Power Manager GNU C++ Standard Library - libraries and runtime support, T he GNU C++ Standard Library GNU Compiler Collection - compatibility, Language Compatibility, Compatibility Changes, Fortran 2003 Compatibility, Fortran 2008 Compatibility, Fortran 77 Compatibility, ABI Compatibility, Debugging Compatibility, Other Compatibility - compiling and building, GNU Compiler Collection (GCC) - features, Status and Features, New Features, Fortran 2003 Features, Fortran 2008 Features - version, Red Hat Developer T oolset Features 169 Red Hat Enterprise Linux 7 Developer Guide GNU debugger - conditional breakpoints, Conditional Breakpoints - debugging, GDB - documentation, GDB Documentation - execution (forked), Forked Execution - forked execution, Forked Execution - fundamentals, Simple GDB - breakpoint, Simple GDB - commands, Simple GDB - halting an executable, Simple GDB - inspecting the state of an executable, Simple GDB - starting an executable, Simple GDB - interfaces (CLI and machine), Alternative User Interfaces for GDB - thread and threaded debugging, Debugging Individual T hreads - tools, Simple GDB - backtrace, Simple GDB - continue, Simple GDB - finish, Simple GDB - help, Simple GDB - list, Simple GDB - next, Simple GDB - print, Simple GDB - quit, Simple GDB - step, Simple GDB - usage, Running GDB - debugging a Hello World program, Running GDB - variations and environments, Alternative User Interfaces for GDB GNU Debugger - version, Red Hat Developer T oolset Features gprof - features, New Features H halting an executable - fundamentals - GNU debugger, Simple GDB helgrind - tools - Valgrind, Valgrind T ools help - tools - GNU debugger, Simple GDB Help system - Eclipse, Eclipse Documentation host (compile server host) 170 Index - compile server - SystemT ap, SystemT ap Compile Server Hover Help - libhover - libraries and runtime support, Setup and Usage I IDE (integrated development environment) - integrated development environment - Eclipse, Eclipse User Interface indexing - libhover - libraries and runtime support, libhover Plug-in inspecting the state of an executable - fundamentals - GNU debugger, Simple GDB installation - debuginfo-packages - debugging, Installing Debuginfo Packages integrated development environment - Eclipse, Eclipse User Interface interfaces (CLI and machine) - GNU debugger, Alternative User Interfaces for GDB introduction - compiling and building, Compiling and Building - debugging, Debugging - Eclipse, Eclipse Development Environment - libraries and runtime support, Libraries and Runtime Support - profiling, Profiling - SystemT ap, SystemT ap ISO 14 4 82 Standard C++ library - GNU C++ Standard Library - libraries and runtime support, T he GNU C++ Standard Library ISO C++ T R1 elements, added support for - GNU C++ Standard Library - libraries and runtime support, GNU C++ Standard Library Updates J Java - libraries and runtime support, Java Java Development - Eclipse, Editing Java Source Code in Eclipse 171 Red Hat Enterprise Linux 7 Developer Guide K KDE Development Framework - libraries and runtime support, KDE Development Framework KDE4 architecture - KDE Development Framework - libraries and runtime support, KDE4 Architecture kdelibs-devel - KDE Development Framework - libraries and runtime support, KDE Development Framework kernel information packages - profiling - SystemT ap, SystemT ap Keyboard Shortcuts Menu - integrated development environment - Eclipse, Keyboard Shortcuts KHT ML - KDE Development Framework - libraries and runtime support, KDE4 Architecture KIO - KDE Development Framework - libraries and runtime support, KDE4 Architecture KJS - KDE Development Framework - libraries and runtime support, KDE4 Architecture KNewStuff2 - KDE Development Framework - libraries and runtime support, KDE4 Architecture KXMLGUI - KDE Development Framework - libraries and runtime support, KDE4 Architecture L libraries - runtime support, Libraries and Runtime Support libraries and runtime support - Boost, Boost - boost-doc, Boost Documentation - documentation, Boost Documentation - message passing interface (MPI), Boost - meta-package, Boost - MPICH2, Boost - new libraries, Boost Updates - Open MPI, Boost 172 Index - sub-packages, Boost - updates, Boost Updates - C++ Standard Library, GNU, T he GNU C++ Standard Library compat-glibc, compat-glibc compatibility, Compatibility GNOME Power Manager, GNOME Power Manager - gnome-power-manager, GNOME Power Manager - GNU C++ Standard Library, T he GNU C++ Standard Library - C++0x, added support for, GNU C++ Standard Library Updates - documentation, GNU C++ Standard Library Documentation - ISO 14482 Standard C++ library, T he GNU C++ Standard Library - ISO C++ T R1 elements, added support for, GNU C++ Standard Library Updates - libstdc++-devel, T he GNU C++ Standard Library - libstdc++-docs, GNU C++ Standard Library Documentation - Standard T emplate Library, T he GNU C++ Standard Library - updates, GNU C++ Standard Library Updates - introduction, Libraries and Runtime Support - Java, Java - documentation, Java Documentation - KDE Development Framework, KDE Development Framework - Akonadi, KDE4 Architecture - documentation, kdelibs Documentation - KDE4 architecture, KDE4 Architecture - kdelibs-devel, KDE Development Framework - KHT ML, KDE4 Architecture - KIO, KDE4 Architecture - KJS, KDE4 Architecture - KNewStuff2, KDE4 Architecture - KXMLGUI, KDE4 Architecture - Phonon, KDE4 Architecture - Plasma, KDE4 Architecture - Solid, KDE4 Architecture - Sonnet, KDE4 Architecture - Strigi, KDE4 Architecture - T elepathy, KDE4 Architecture - libhover - Code Completion, Setup and Usage Hover Help, Setup and Usage indexing, libhover Plug-in usage, Setup and Usage - libstdc++, T he GNU C++ Standard Library - Perl, Perl - documentation, Perl Documentation - module installation, Installation - updates, Perl Updates - Python, Python - documentation, Python Documentation - updates, Python Updates - Qt, Qt - documentation, Qt Library Documentation 173 Red Hat Enterprise Linux 7 Developer Guide - meta object compiler (MOC), Qt Qt Creator, Qt Creator qt-doc, Qt Library Documentation updates, Qt Updates widget toolkit, Qt - Ruby, Ruby - documentation, Ruby Documentation - ruby-devel, Ruby Library and Runtime Details - NSS Shared Databases, NSS Shared Databases - Backwards Compatibility, Backwards Compatibility - Documentation, NSS Shared Databases Documentation libstdc++ - libraries and runtime support, T he GNU C++ Standard Library libstdc++-devel - GNU C++ Standard Library - libraries and runtime support, T he GNU C++ Standard Library libstdc++-docs - GNU C++ Standard Library - libraries and runtime support, GNU C++ Standard Library Documentation list - tools - GNU debugger, Simple GDB - Performance Counters for Linux (PCL) and perf, Perf T ool Commands M machine interface - GNU debugger, Alternative User Interfaces for GDB mallopt, mallopt massif - tools - Valgrind, Valgrind T ools mechanisms - GNU debugger - debugging, GDB memcheck - tools - Valgrind, Valgrind T ools memstomp - version, Red Hat Developer T oolset Features Menu (Help Menu) - Help system 174 Index - Eclipse, Eclipse Documentation menu (Main Menu) - integrated development environment - Eclipse, Eclipse User Interface Menu Visibility T ab - integrated development environment - Eclipse, Customize Perspective message passing interface (MPI) - Boost - libraries and runtime support, Boost meta object compiler (MOC) - Qt - libraries and runtime support, Qt meta-package - Boost - libraries and runtime support, Boost module installation - Perl - libraries and runtime support, Installation module signing (compile server authorization) - SSL and certificate management - SystemT ap, Authorizing Compile Servers for Module Signing (for Unprivileged Users) MPICH2 - Boost - libraries and runtime support, Boost N new extensions - GNU C++ Standard Library - libraries and runtime support, GNU C++ Standard Library Updates new libraries - Boost - libraries and runtime support, Boost Updates New Project Wizard - projects - Eclipse, Starting an Eclipse project next - tools - GNU debugger, Simple GDB NSS Shared Datagbases 175 Red Hat Enterprise Linux 7 Developer Guide - Library and Runtime Details, NSS Shared Databases - Backwards Compatibility, Backwards Compatibility - Documentation, NSS Shared Databases Documentation O objcopy - features, New Features objdump - features, New Features opannotate - tools - OProfile, OProfile T ools oparchive - tools - OProfile, OProfile T ools opcontrol - tools - OProfile, OProfile T ools Open MPI - Boost - libraries and runtime support, Boost operf - tools - OProfile, OProfile T ools opgprof - tools - OProfile, OProfile T ools opreport - tools - OProfile, OProfile T ools OProfile - profiling, OProfile - documentation, OProfile Documentation - usage, Using OProfile - tools, OProfile T ools - opannotate, OProfile T ools - oparchive, OProfile T ools - opcontrol, OProfile T ools - operf, OProfile T ools - opgprof, OProfile T ools - opreport, OProfile T ools - version, Red Hat Developer T oolset Features 176 Index oprofiled - OProfile - profiling, OProfile Outline Window - user interface - Eclipse, Eclipse User Interface P perf - profiling - Performance Counters for Linux (PCL) and perf, Performance Counters for Linux (PCL) T ools and perf - usage - Performance Counters for Linux (PCL) and perf, Using Perf Performance Counters for Linux (PCL) and perf - profiling, Performance Counters for Linux (PCL) T ools and perf - subsystem (PCL), Performance Counters for Linux (PCL) T ools and perf - tools, Perf T ool Commands - commands, Perf T ool Commands - list, Perf T ool Commands - record, Perf T ool Commands - report, Perf T ool Commands - stat, Perf T ool Commands - usage, Using Perf - perf, Using Perf Perl - libraries and runtime support, Perl perspectives - integrated development environment - Eclipse, Eclipse User Interface Phonon - KDE Development Framework - libraries and runtime support, KDE4 Architecture Plasma - KDE Development Framework - libraries and runtime support, KDE4 Architecture plug-in for Eclipse - Autotools - compiling and building, Autotools Plug-in for Eclipse - profiling - Valgrind, Valgrind Plug-in for Eclipse - specfile Editor - compiling and building, Eclipse RPM Building, Eclipse Built-in Specfile Editor 177 Red Hat Enterprise Linux 7 Developer Guide pretty-printers - Python pretty-printers - debugging, Python Pretty-Printers print - tools - GNU debugger, Simple GDB Problems View - user interface - Eclipse, Eclipse User Interface Profile As - Eclipse - profiling, Valgrind Plug-in for Eclipse Profile Configuration Menu - Eclipse - profiling, Valgrind Plug-in for Eclipse profiling - conflict between perf and oprofile, Using OProfile, Using Perf - Eclipse, Valgrind Plug-in for Eclipse - Profile As, Valgrind Plug-in for Eclipse - Profile Configuration Menu, Valgrind Plug-in for Eclipse - ftrace, ftrace - introduction, Profiling - OProfile, OProfile - oprofiled, OProfile - Performance Counters for Linux (PCL) and perf, Performance Counters for Linux (PCL) T ools and perf - SystemT ap, SystemT ap - DynInst, DynInst with SystemT ap 2.0 - Valgrind, Valgrind Project Explorer - user interface - Eclipse, Eclipse User Interface projects - Eclipse, Starting an Eclipse project Publican - Documentation T ools, Publican - Adding media to documentation, Adding Media to Documentation - Brands, Brands - Building a document, Building a Document - Building a website, Building a Website - Commands, Commands - Create a new document, Create a New Document - Files, Files - Packaging a publication, Packaging a Publication 178 Index - Publican documentation, Documentation Python - libraries and runtime support, Python Python pretty-printers - debugging, Python Pretty-Printers Q Qt - libraries and runtime support, Qt Qt Creator - Qt - libraries and runtime support, Qt Creator qt-doc - Qt - libraries and runtime support, Qt Library Documentation Quick Access Menu - integrated development environment - Eclipse, T he Quick Access Menu quick fix (Problems View) - user interface - Eclipse, Eclipse User Interface quit - tools - GNU debugger, Simple GDB R readelf - features, New Features record - tools - Performance Counters for Linux (PCL) and perf, Perf T ool Commands report - tools - Performance Counters for Linux (PCL) and perf, Perf T ool Commands required packages - compiling and building, Distributed Compiling - profiling - SystemT ap, SystemT ap requirements - GNU debugger - debugging, GDB 179 Red Hat Enterprise Linux 7 Developer Guide Ruby - libraries and runtime support, Ruby ruby-devel - Ruby - libraries and runtime support, Ruby runtime support - libraries, Libraries and Runtime Support S scripts (SystemT ap scripts) - profiling - SystemT ap, SystemT ap setup - libhover - libraries and runtime support, Setup and Usage Shortcuts T ab - integrated development environment - Eclipse, Customize Perspective signed modules - SSL and certificate management - SystemT ap, Authorizing Compile Servers for Module Signing (for Unprivileged Users) - unprivileged user support - SystemT ap, SystemT ap Support for Unprivileged Users Solid - KDE Development Framework - libraries and runtime support, KDE4 Architecture Sonnet - KDE Development Framework - libraries and runtime support, KDE4 Architecture specfile Editor - compiling and building, Eclipse RPM Building, Eclipse Built-in Specfile Editor SSL and certificate management - SystemT ap, SSL and Certificate Management Standard T emplate Library - GNU C++ Standard Library - libraries and runtime support, T he GNU C++ Standard Library starting an executable - fundamentals - GNU debugger, Simple GDB 180 Index stat - tools - Performance Counters for Linux (PCL) and perf, Perf T ool Commands step - tools - GNU debugger, Simple GDB strace - version, Red Hat Developer T oolset Features Strigi - KDE Development Framework - libraries and runtime support, KDE4 Architecture sub-packages - Boost - libraries and runtime support, Boost subsystem (PCL) - profiling - Performance Counters for Linux (PCL) and perf, Performance Counters for Linux (PCL) T ools and perf supported templates - Autotools - compiling and building, Autotools Plug-in for Eclipse SVN (see Apache Subversion (SVN)) SystemT ap - compile server, SystemT ap Compile Server - host (compile server host), SystemT ap Compile Server - profiling, SystemT ap - documentation, SystemT ap Documentation - DynInst, DynInst with SystemT ap 2.0 - introduction, SystemT ap - kernel information packages, SystemT ap - required packages, SystemT ap - scripts (SystemT ap scripts), SystemT ap - SSL and certificate management, SSL and Certificate Management - automatic authorization, Automatic Authorization - connection authorization (compile servers), Authorizing Compile Servers for Connection - module signing (compile server authorization), Authorizing Compile Servers for Module Signing (for Unprivileged Users) - unprivileged user support, SystemT ap Support for Unprivileged Users - signed modules, SystemT ap Support for Unprivileged Users - version, Red Hat Developer T oolset Features T 181 Red Hat Enterprise Linux 7 Developer Guide T asks Properties - user interface - Eclipse, Eclipse User Interface T asks View - user interface - Eclipse, Eclipse User Interface technical overview - projects - Eclipse, Starting an Eclipse project T elepathy - KDE Development Framework - libraries and runtime support, KDE4 Architecture templates (supported) - Autotools - compiling and building, Autotools Plug-in for Eclipse thread and threaded debugging - GNU debugger, Debugging Individual T hreads T ool Bar Visibility - integrated development environment - Eclipse, Customize Perspective tools - GNU debugger, Simple GDB OProfile, OProfile T ools Performance Counters for Linux (PCL) and perf, Perf T ool Commands profiling - Valgrind, Valgrind T ools - Valgrind, Valgrind T ools tracked comments - user interface - Eclipse, Eclipse User Interface U unprivileged user support - SystemT ap, SystemT ap Support for Unprivileged Users unprivileged users - unprivileged user support - SystemT ap, SystemT ap Support for Unprivileged Users updates - Boost - libraries and runtime support, Boost Updates - GNU C++ Standard Library - libraries and runtime support, GNU C++ Standard Library Updates 182 Index - Perl - libraries and runtime support, Perl Updates - Python - libraries and runtime support, Python Updates - Qt - libraries and runtime support, Qt Updates usage - GNU debugger, Running GDB - fundamentals, Simple GDB - libhover - libraries and runtime support, Setup and Usage - Performance Counters for Linux (PCL) and perf, Using Perf - profiling - ftrace, Using ftrace - OProfile, Using OProfile - Valgrind - profiling, Using Valgrind user interface - integrated development environment - Eclipse, Eclipse User Interface V Valgrind - profiling, Valgrind - commands, Valgrind T ools - documentation, Valgrind Documentation - plug-in for Eclipse, Valgrind Plug-in for Eclipse - tools, Valgrind T ools - usage, Using Valgrind - tools - cachegrind, Valgrind T ools callgrind, Valgrind T ools helgrind, Valgrind T ools massif, Valgrind T ools memcheck, Valgrind T ools - version, Red Hat Developer T oolset Features variable tracking at assignments (VT A) - debugging, Variable T racking at Assignments variations and environments - GNU debugger, Alternative User Interfaces for GDB View Menu (button) - user interface - Eclipse, Eclipse User Interface 183 Red Hat Enterprise Linux 7 Developer Guide W widget toolkit - Qt - libraries and runtime support, Qt workbench - integrated development environment - Eclipse, Eclipse User Interface Workbench User Guide - Help system - Eclipse, Eclipse Documentation workspace (overview) - projects - Eclipse, Starting an Eclipse project Workspace Launcher - projects - Eclipse, Starting an Eclipse project 184 ">
/
Download
Just a friendly reminder. You can view the document right here. But most importantly, our AI has already read it. It can explain complex things in simple terms, answer your questions in any language, and help you quickly navigate even the longest or most compilcated documents.
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
Eclipse IDE integration
GNU Compiler Collection (GCC)
Debugging with GDB
Profiling with Valgrind/OProfile
Red Hat Developer Toolset
Red Hat Software Collections
Frequently asked questions
Eclipse is a powerful development environment that provides tools for each phase of the development process.
Red Hat Enterprise Linux 6 supports three of the most popular open source revision control systems: CVS, SVN, and Git.
The main tool is GNU Compiler Collection (GCC).
