Electrolux D7-130C Error codes

User manual
Tumble dryer
D7–130, D7–130C
Type N1130..
Original instructions
438909433/EN
2025.07.09
Contents
Contents
1 Safety Precautions ..............................................................................................................................5
1.1 General safety information..........................................................................................................6
1.2 Commercial use only..................................................................................................................6
1.3 Copyright ..................................................................................................................................6
1.4 Ergonomics certification .............................................................................................................6
1.5 Symbols....................................................................................................................................7
2 Operating panel ..................................................................................................................................8
3 Program description ............................................................................................................................9
3.1 General.....................................................................................................................................9
3.2 Program description ...................................................................................................................9
4 Handling ........................................................................................................................................... 11
4.1 Load ....................................................................................................................................... 11
4.2 How to start the machine ..........................................................................................................12
4.3 Additional functions..................................................................................................................12
4.4 When program has ended ........................................................................................................13
5 Error codes .......................................................................................................................................14
6 Maintenance .....................................................................................................................................15
6.1 General...................................................................................................................................15
6.2 Time for maintenance...............................................................................................................15
6.3 Every day ................................................................................................................................15
6.4 Fresh air intake........................................................................................................................16
6.5 Machines with residual moisture control (RMC) ..........................................................................16
6.6 Condensate machine ...............................................................................................................16
6.7 Maintenance to be carried out by qualified service personnel ......................................................17
7 Disposal information ..........................................................................................................................18
7.1 Appliance recyclability and disposal ..........................................................................................18
7.1.1 Recyclability...................................................................................................................18
7.1.2 Procedure regarding appliance disposal and component / material recovery .......................18
7.2 Disposal of packing ..................................................................................................................18
The manufacturer reserves the right to make changes to design and component specifications.
User manual
5
1 Safety Precautions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Servicing shall be carried out only by authorized personnel.
Only authorized spare parts, accessories and consumables shall be used.
The machine is not to be used if industrial chemicals have been used for cleaning.
Do not dry unwashed items in the machine.
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed
in hot water with an extra amount of detergent before being dried in the machine.
Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber
backed articles and clothes or pillows fitted with foam rubber pads should not be dried
in the machine.
Fabric softeners or similar products should be used as specified by the fabric softener
instructions.
The final part of a drying cycle occurs without heat (cool down cycle) to ensure that the
items are left at a temperature that ensures that the items will not be damaged.
Remove all objects from pockets such as lighters and matches.
WARNING. Never stop the machine before the end of the drying cycle unless all items
are quickly removed and spread out so that the heat is dissipated.
Adequate ventilation has to be provided to avoid the back flow of gases into the room
for appliances burning other fuels, including open fires.
Exhaust air must not be discharged into a flue which is used for exhausting fumes from
appliances burning gas or other fuels.
The machine must not be installed behind a lockable door, a sliding door or a door with
a hinge on the opposite side to that of the machine in such a way that a full opening of
the machine is restricted.
If the machine has a lint trap this has to be cleaned frequently.
The lint must not be accumulated around the machine.
DO NOT MODIFY THIS APPLIANCE.
When performing service or replacing parts, the power must be disconnected.
When the power is disconnected, the operator must see that the machine is disconnected (that the plug is removed and remains removed) from any point to which he has
access. If this is not possible, due to the construction or installation of the machine, a
disconnection with a locking system in the isolated position shall be provided.
In accordance with the wiring rules: mount a multi-pole switch prior to the machine to
facilitate installation and service operations.
WARNING: The appliance must not be supplied through an external switching device,
such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
If different rated voltages or different rated frequencies (separated by a /) are stated at
the machine data plate, instructions for adjusting the appliance for operation at the required rated voltage or rated frequency are stated in the installation manual.
Stationary appliances not fitted with means for disconnection from the supply mains
having a contact separation in all poles that provide full disconnection under overvoltage category III, means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
The openings in the base, shall not be obstructed by a carpet.
6
User manual
• Oil-affected items can ignite spontaneously, especially when exposed to heat sources
such as in a tumble dryer. The items become warm, causing an oxidation reaction in
the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot
enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from
escaping and so create a fire hazard.
• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed
in hot water with extra detergent – this will reduce, but not eliminate, the hazard.
• Maximum mass of dry cloth: 6 kg.
• A-weighted emission sound pressure level at working stations: 70 dB(A).
• Additional requirements for the following countries; AT, BE, BG, HR, CY, CZ, DK, EE,
FI, FR, DE, GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH,
TR, UK:
– The appliance can be used in public areas.
– This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Additional requirements for other countries:
– This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
1.1 General safety information
In order to prevent damage to the electronics (and other parts) that may occur as the result of condensation, the machine should be placed in room temperature for 24 hours before being used for the first time.
1.2 Commercial use only
The machine/machines covered by this manual is/are made for commercial and industrial use only.
1.3 Copyright
This manual is intended solely for consultation by the operator and can only be given to third parties with the permission of Wascomat company.
1.4 Ergonomics certification
The human body is designed for movement and activity but physical stress injuries as a result of static and repetitive
movements or unfavorable working postures may occur.
The ergonomic features of your product, the ones which may influence your physical and cognitive interaction with it,
have been assessed and certified.
A product which exhibits ergonomic features, in fact, shall fulfil specific ergonomic requirements, belonging to three
different areas: Polytechnic, Biomedical and Psychosocial (usability and satisfaction).
For each of these areas, specific tests with real users have been performed. The product was therefore compliant
with the ergonomic acceptability criteria requested by the standards.
User manual
7
In case several machines are managed by the same operator the repetitive movements will increase and as a consequence of this the related biomechanical risk will increase exponentially.
The possible postural risks are the interaction with the door handle in case the machine is placed directly on the floor
without a base and with the door handle and the user interface, display and knob, in case the machine is placed on
top of a washing machine.
Follow the below recommendations to avoid, as much as possible, operators acquiring bodily injury.
• Place the machine on a base instead of directly on the floor so that the operator does not need to bend his/her
back unnecessarily when loading and unloading.
Minimum suggested height of bases is 300 mm.
• Make sure there are suitable trolleys or baskets for loading, unloading and transportation.
• Organize job rotation in the working place in the case several machines are managed by the same operator.
1.5 Symbols
Caution
Caution, hot surface
Caution, high voltage
Warning, risk of fire / flammable material
Danger, crush hazard
Read the instructions before using the machine
User manual
8
2 Operating panel
A
B
fig.X01076B
A
Display
B
Control knob
User manual
3 Program description
3.1 General
The machine is equipped with a number of programs adapted to the range of use to which the machine is intended
— different markets use different programs. The following program description is a short description of some examples of programs that can be used.
It is recommended to follow the care labelling of the garment as far as possible.
For best possible drying result it is advisable to dry garments of the same quality for each drying cycle.
3.2 Program description
There are two types of programs, automatic programs and time programs.
Automatic programs has moisture detection and will stop when selected dryness is achieved.
Time programs has no moisture detection and will stop when the preset or selected time has ended.
The following table shows some examples of available programs and a short description of those:
Automatic programs
Description
NORMAL
Cotton and terry.
Normal/medium temperature.
The program will stop when preset dryness/selected option is achieved (Extra dry, Dry or Iron dry).
LOW
Synthetic (example of synthetic fabrics: polyester, polyamide, polyacrylic and elastan), viscose, polycotton and
delicate fabrics.
Low temperature.
The program will stop when preset dryness/selected option is achieved (Extra dry, Dry or Iron dry).
Time programs
Description
NORMAL
Cotton and terry.
Different drying times can be selected.
The program will stop when the time is up.
LOW
Synthetic (example of synthetic fabrics: polyester, polyamide, polyacrylic and elastan), viscose, polycotton and
delicate fabrics.
Different drying times can be selected.
The program will stop when the time is up.
NO HEATING
Airing bedspreads, duvets and bedclothes.
Different drying times can be selected.
The program will stop when the time is up.
9
User manual
10
The following table shows some examples of different programs that are used for special markets such as hospitals,
restaurants, camping sites etc. and a short description of those:
Automatic programs
Description
NORMAL
EXTRA DRY
Denim and terry.
The program will stop when set dryness is achieved.
LOW
EXTRA DRY
Viscose and polycotton.
The program will stop when set dryness is achieved.
NORMAL
DRY
Cotton and terry.
The program will stop when set dryness is achieved.
LOW
DRY
Synthetic (example of synthetic fabrics: polyester, polyamide, polyacrylic and elastan), viscose, polycotton and
delicate fabrics.
The program will stop when set dryness is achieved.
NORMAL
IRON DRY
Cotton.
The program will stop when set dryness is achieved.
LOW
IRON DRY
Synthetic (example of synthetic fabrics: polyester, polyamide, polyacrylic and elastan), viscose, polycotton and
delicate fabrics.
The program will stop when set dryness is achieved.
Time programs
Description
NORMAL
Cotton and terry.
Different drying times can be selected.
The program will stop when the time is up.
LOW
Synthetic (example of synthetic fabrics: polyester, polyamide, polyacrylic and elastan), viscose, polycotton and
delicate fabrics.
Different drying times can be selected.
The program will stop when the time is up.
NO HEATING
Airing bedspreads, duvets and bedclothes.
Different drying times can be selected.
The program will stop when the time is up.
The following table shows some examples of available programs used on coin operated machines and a short description of those:
Time programs
Description
HIGH
Cotton and terry.
The program will stop when the time is up.
MEDIUM
Cotton and terry.
The program will stop when the time is up.
LOW
Synthetic (example of synthetic fabrics: polyester, polyamide, polyacrylic and elastan), viscose, polycotton and
delicate fabrics.
The program will stop when the time is up.
NO HEATING
Airing bedspreads, duvets and bedclothes.
The program will stop when the time is up.
User manual
11
4 Handling
4.1 Load
Note!
Remove all objects from pockets and make sure there are no metal objects such as screws, pins etc. left.
Metal objects might cause damage to the drum.
fig.X04827B
Make sure the filter is clean.
fig.7363
12
User manual
Load the goods into the machine and close the door.
The recommended maximum load is 6 kg.
4.2 How to start the machine
Automatic programs
Select program with the control knob.
Start the machine by pressing the control knob.
Time programs
Select program with the control knob.
Start the machine by pressing the control knob.
After start it is possible to change the time for the selected program. Turn the control knob to set the desired time.
Coin operated machines
Select program with the control knob.
Insert correct amount of coins to start the machine and/or press the control knob.
After start it is possible to add time for the selected program. Insert more coins to add time.
4.3 Additional functions
There is a menu with additional functions available for selection after start. When pressing the control knob the menu
will appear on the display.
Select from the menu by turning the control knob and press the control knob to activate.
Note!
Some of the functions may not be available or active on your machine.
Pause
It is possible to pause an ongoing program.
Select PAUSE and activate.
For some machines it is also possible to pause directly when pressing the control knob.
When pressing the control knob again the program will continue.
User manual
13
End a program
It is possible to end a program after start.
Select END PROGRAM and activate.
When pressing the control knob the program will be ended.
Status
Select STATUS MENU and activate.
The status menu shows the status for inlet air temp, outlet air temp, RMC and if the heat is on or off in the machine.
4.4 When program has ended
Note!
For the best possible drying result it is important to empty the machine as soon as the program has ended.
If the machine is not emptied as soon as the program has ended the drum will rotate in short intervals in order to keep
the goods from being wrinkled.
Clean the filter after each drying cycle for best performance.
fig.7363
User manual
14
5 Error codes
A fault in the program or in the machine is indicated by an error code on the display.
Some of these error codes can be solved easily without contacting service personnel.
Error
code
Text
Cause/Action
12:11
DRYING ERROR WITH RMC
PROGRAM
The longest permitted RMC time has been exceeded. (Applies only to machines with RMC).
The machine is overfilled or the garment is too wet.
12:12
DRYING ERROR WITH AUTOSTOP
PROGRAM
The longest permitted automatic stop time has been exceeded. (Applies only to machines with
automatic stop).
The machine is overfilled or the garment is too wet.
12:18
REDISTRIBUTION OF LOAD
NEEDED
Machine indicates that load is blocking the airflow.
Redistribute the load.
Restart the machine to clear error message.
20:1
O.H. DRUM MOTOR
The motor is too hot.
The machine will restart automatically when the temperature on the motor is OK (if the door
has not been opened).
User manual
15
6 Maintenance
6.1 General
It is the responsibility of the owner of the machine/the laundry manager to make sure that maintenance is periodically
performed.
Note!
Lack of maintenance may deteriorate the performance of the machine and may cause damage to
components.
6.2 Time for maintenance
When the display is showing the message TIME FOR MAINTENANCE — contact the owner of the machine/the laundry
manager to perform maintenance (if available, a telephone number and/or a tag will also be displayed).
The machine can be used meanwhile. However, the message will keep coming back until the service is performed.
The message will disappear after about 30 seconds or if the start button is pressed.
6.3 Every day
Check that the machine does not operate with the door or filter door open, if so, the machine must be placed out of
order until repairs are made.
Note!
Contact qualified service personnel to disconnect power from the affected machine.
Clean the door, door gasket and other external parts.
fig.7362
Check that the filter is clean and unbroken. Clean or replace if necessary.
fig.7363
16
User manual
Remove any lint and dust around the machine.
6.4 Fresh air intake
At regular basis, check that the fresh air intake on the front of the machine is not clogged by lint and dust or otherwise
blocked.
Clean with a vacuum cleaner.
fig.7386
6.5 Machines with residual moisture control (RMC)
At regular basis, wipe off/clean drum and lifters with citric acid (Acidum citricum). If soap/softener residue remains, it
is recommended also to use a coarse sponge.
Lack of cleaning can affect the functionality of the residual moisture control. This can result in more moist load than
requested at program end.
6.6 Condensate machine
At regular basis, clean the condensing unit from dust and lint.
Remove the condensing unit from the machine and clean it by rinsing it with water. Make sure all dust and lint is
removed.
Clean the area where the air condenser is placed in the machine.
fig.7160A
User manual
6.7 Maintenance to be carried out by qualified service personnel
Contact qualified service personnel to perform the following maintenance:
After 1600 hours of operation or once a year, whichever comes first:
• Clean the fan, the exhaust duct and the fresh-air intake to the room
• On machines with RMC: Clean the glide surface on the RMC graphite collector
• Clean the area around the drum
• Clean the motors
• Check the belt tension
For original spareparts please contact your local authorized dealer.
17
User manual
18
7 Disposal information
7.1 Appliance recyclability and disposal
7.1.1
Recyclability
Our appliances are manufactured using a significant percentage of recyclable metals (such as stainless steel, iron,
aluminium, galvanized sheet, copper, etc.), which can be recovered through the local recycling systems, in compliance with the regulations in force in the country of use.
National regulations regarding waste disposal may vary. Disposal of the appliance must therefore be carried out in
accordance with the applicable legislation and the directives issued by the competent authorities in the country where
the appliance is decommissioned.
The components of the appliance must be separated and disposed of in accordance with their material composition
(e.g. metals, oils, greases, plastics, rubber, refrigerant gases, insulating boards and other insulating material, glass
wool, LEDs, etc.) and in full compliance with applicable local and international waste management regulations.
Compressors may contain oils and refrigerants fluids - are special waste and has to be recycled on local bases
regulations.
7.1.2
Procedure regarding appliance disposal and component / material recovery
This product should not simply be disposed of in the environment at the end of its life cycle; it is imperative instead either to dispose of it in accordance with local environmental regulations, or, preferably, to deliver it whole to an authorized recycling center.
All removed components, including doors and other structural parts, must be delivered together with the appliance to
an authorized recycling or dismantling facility.
The dismantling/recycling center will apply state of the art technologies and methods available to them to effectively
disassemble the products for best recyclability.
Note that printed circuit boards, electrical motors or other components identified in European Union legislation to be
of high critical raw materials recovery potential need to be addressed specifically.
In case of doubts or questions, always refer to your reference customer care service.
Before disposing of the appliance, carefully inspect its physical condition and preservation state, checking for potential leaks of liquids or gases, as well as for broken parts that may pose hazards during handling and subsequent
dismantling.
The symbol on the product indicates that this product should not be treated as domestic
waste, but must be correctly disposed of in order to prevent any negative consequences for
the environment and human health. For further information on the recycling of this product,
contact the local dealer or agent, the customer care service or the local body responsible
for waste disposal.
Note!
When dismantling the appliance, any marking, this manual and other documents concerning the appliance
must be destroyed.
7.2 Disposal of packing
The packing must be disposed of in compliance with the current regulations in the country where the appliance is
used. All the packing materials are environmentally friendly.
They can be safely kept, recycled or burned in an appropriate waste incineration plant. Recyclable plastic parts are
marked as following examples.
Polyethylene:
PE
• Outer wrapping
• Instructions bag
Polypropylene:
• Straps
PP
Polystyrene foam:
• Corner protectors
PS
Electrolux Professional AB
341 80 Ljungby, Sweden
Share more of our thinking at www.wascomat.com
">