HP Deskjet Ink Advantage 2510 All-in-One Printer series User guide
تبلیغات
تبلیغات
HP Deskjet 2510 All-in-One series
Contents
2 Get to know the HP Deskjet 2510
1
2
1 How Do I?
Learn how to use your HP Deskjet 2510
•
•
•
•
•
How Do I?
3
Chapter 1
4 How Do I?
2 Get to know the HP Deskjet 2510
•
•
•
Printer parts
1 Input tray
2 Input tray guard
3 Paper-width guide for the input tray
4 Control panel
5 Cartridge door
6 Output tray
7 Output tray extender (also referred to as the tray extender)
8 Cartridges
Get to know the HP Deskjet 2510 5
Chapter 2
Control panel features
1 Power: Turns the product on or off. When the product is off, a minimal amount of power is still used. To completely remove power, turn off the product, then unplug the power cord. A blinking power light indicates there is an error on the printer. See
Status lights for more information.
2 Scan: Initiates a front panel scan job after connection to computer has been established.
3 Cancel: Stops the current operation.
4 Fit to page: Enlarges or reduces the original placed on the glass.
5 Fit to page light: Indicates whether the enlarge or reduce function has been selected.
6 Start Copy Black: Starts a black-and-white copy job. Increase the number of copies (up to 19) by pressing the button multiple times. Acts as a resume button after resolving print problems.
7 Start Copy Color: Starts a color copy job. Increase the number of copies (up to 19) by pressing the button multiple times.
Acts as a resume button after resolving print problems.
8 Attention light: Indicates that there is a paper jam, the printer is out of paper, or some event that requires your attention.
9 Control panel display: Indicates the number of copies, media error, ink level, and ink error.
Auto Power-Off is automatically enabled by default when you turn on the printer. When Auto Power-Off is
Power-Off for more information.
Status lights
When the product is turned on, the power button light will be lit. When the product is processing a job, the power light will be blinking. Additional blinking lights signal errors that you can resolve. See below to learn about blinking lights and what to do.
Behavior
Power light is blinking and attention light is on.
Cause and solution
Output tray closed when printing is attempted.
Open output tray.
6 Get to know the HP Deskjet 2510
(continued)
Behavior Cause and solution
Power light, ink levels, and attention light are blinking.
Both ink level icons are blinking.
One ink level icon is blinking.
Letter "P", media icon, and attention light are blinking.
Letter "J", media icon, and attention light are blinking.
Letter "C", ink level icons, and attention light are blinking.
Power light, media icon, and attention light are blinking.
Ink access door is open.
See
Both cartridges are missing, or do not have the tape removed, or may be defective.
Install cartridges, or remove the pink tape from the cartridges, or replace the defective cartridges.
See
Replace the cartridges for more information.
Blinking icon indicates corresponding cartridge is missing, or does not have the tape removed, or may be defective. The printer will print in singlecartridge mode with one cartridge.
Install missing black or color cartridge, or remove the pink tape from the cartridge, or replace the defective cartridge.
There is no paper, or paper is not feeding.
Load paper, then press any button, except
Cancel, to resume printing. See
There is a paper jam.
See
Clear a paper jam . Load paper, then press
any button, except Cancel, to resume printing.
Cartridge carriage inside printer has stalled.
Open cartridge door and make sure carriage is not obstructed. Move carriage to the right, close door, and then press any button, except Cancel, to resume.
Scanner is not working. Press Power button to turn printer off, and then on again.
If problem persists, contact HP. Printer will still print even if scanner is not working.
Status lights 7
Chapter 2
(continued)
Behavior
Power light, letter "E", media icon, ink level icons, ink drop icon, and attention light are blinking.
One ink level icon and ink drop icon are blinking, and the attention light is on.
Both ink level icons and ink drop icon are blinking, and the attention light is on.
Cause and solution
Printer is in an error state.
Reset printer.
1.
Turn printer off.
2.
Unplug power cord.
3.
Wait a minute, plug power cord back in.
4.
Turn on printer.
If problem persists, contact HP.
Blinking ink level icon indicates that corresponding cartridge has a problem. Cartridge may be improperly installed, incompatible, counterfeit or very low on ink.
• If you see a message on your computer screen, refer to the message for more information about the problem.
• If there is no message on your computer screen, try removing and reinserting the cartridge.
• Confirm that you are using the correct HP cartridge for your printer.
• Determine if the cartridge is defective. See
Identify a defective cartridge .
• If print quality is poor, consider replacing the cartridge. See
Both cartridges have a problem. Cartridges may be improperly installed, incompatible, defective, counterfeit or very low on ink.
• If you see a message on your computer screen, refer to the message for more information about the problem.
• If there is no message on your computer screen, try removing and reinserting the cartridges.
• Confirm that you are using the correct HP cartridges for your printer.
• Determine if a cartridge is defective. See
Identify a defective cartridge .
• If print quality is poor, consider replacing the cartridges. See
8 Get to know the HP Deskjet 2510
3 Print
Choose a print job to continue.
Print documents
To print from a software application
1.
Make sure the output tray is open.
2.
Make sure you have paper loaded in the input tray.
See
Load media for more information.
3.
From your software application, click the Print button.
4.
Make sure the product is the selected printer.
5.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer, or Preferences.
6.
Select the appropriate options.
• On Layout tab select Portrait or Landscape orientation.
• On Paper/Quality tab select the appropriate paper type and print quality from the Media drop-down list.
• Click Advanced to select the appropriate paper size from the Paper/Output list.
7.
Click OK to close the Properties dialog box.
8.
Click Print or OK to begin printing.
Print 9
Chapter 3
NOTE: You can print your document on both sides of the paper, instead of just one side. Click on the
Advanced button on the Paper/Quality or Layout tab. From the Pages to Print drop-down menu select
Print Even Pages Only. Click OK to print. After the even numbered pages of the document have been printed, remove the document from the output tray. Reload the paper in the input tray with the blank side up, and top of page down. Return to the Pages to Print drop-down menu and then select Print Odd Pages
Only. Click OK to print.
Print photos
To print a photo on photo paper
1.
Make sure the output tray is open.
2.
Remove all paper from the input tray, and then load the photo paper print side up.
NOTE: If the photo paper you are using has perforated tabs, load photo paper so that tabs are on top.
for more information.
3.
On the File menu in your software application, click Print.
4.
Make sure the product is the selected printer.
5.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer, or Preferences.
6.
Click the Paper/Quality tab.
7.
Select the appropriate options.
• On Layout tab select Portrait or Landscape orientation.
• On Paper/Quality tab select the appropriate paper type and print quality from the Media drop-down list.
• Click Advanced to select the appropriate paper size from the Paper/Output list.
NOTE: For maximum dpi resolution, go to the Paper/Quality tab and select Photo Paper, Best Quality from the Media drop-down list. Make sure you are printing in color. Then go to the Advanced tab and select Yes from the Print in Max DPI drop-down list. For more information, see
.
8.
Click OK to return to the Properties dialog box.
9.
Click OK, and then click Print or OK in the Print dialog box.
NOTE: Do not leave unused photo paper in the input tray. The paper might start to curl, which could reduce the quality of your printout. Photo paper should be flat before printing.
Print envelopes
You can load one or more envelopes into the input tray of the HP Deskjet 2510. Do not use shiny or embossed envelopes or envelopes that have clasps or windows.
10 Print
NOTE: For specific details on how to format text for printing on envelopes, consult the help files in your word processing software. For best results, consider using a label for the return address on envelopes.
To print envelopes
1.
Make sure the output tray is open.
2.
Slide the paper guide all the way to the left.
3.
Place the envelopes in the right side of the tray. The side to be printed on should face up. The flap should be on the left side.
4.
Push the envelopes into the printer until they stop.
5.
Slide the paper guide firmly against the edge of the envelopes.
See
Load media for more information.
6.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer, or Preferences.
7.
Select the appropriate options.
• On Paper/Quality tab select the appropriate type from the Media drop-down menu.
• On Paper/Quality tab select the appropriate envelope size from the Paper Size drop-down menu.
8.
Click OK, and then click Print or OK in the Print dialog box.
Tips for print success
To successfully print, the HP cartridges should be functioning properly with sufficient ink, the paper should be loaded correctly, and the product should have the appropriate settings.
Cartridge tips
• Use genuine HP ink cartridges.
• Install both the black and tri-color cartridges correctly.
For more information, see
• Check the estimated ink levels in the cartridges to make sure there is sufficient ink.
For more information, see
Check the estimated ink levels .
• For more information, see
Paper loading tips
• Load a stack of paper (not just one page). All of the paper in the stack should be the same size and type to avoid causing a paper jam.
• Load paper with the side to be printed on facing up.
• Ensure that paper loaded in the input tray lies flat and the edges are not bent or torn.
• Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-width guide does not bend the paper in the input tray.
• For more information, see
Tips for print success 11
Chapter 3
Printer settings tips
• On the Paper/Quality tab of the print driver, select the appropriate paper type and quality from the Media drop down menu.
• On the Advanced tab, and select the appropriate paper size from the Paper Size drop-down menu.
• Click the HP Deskjet 2510 series desktop icon to open the Printer Software.
NOTE: You can also access the Printer Software by clicking Start > Programs > HP > HP Deskjet 2510 series > HP Deskjet 2510 series
Notes
• Genuine HP ink cartridges are designed and tested with HP printers and papers to help you easily produce great results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased genuine HP ink cartridges, go to: www.hp.com/go/anticounterfeit
• Ink level warnings and indicators provide estimates for planning purposes only.
NOTE: When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the cartridges until print quality becomes unacceptable.
• Software settings selected in the print driver only apply to printing, they do not apply to copying or scanning.
• You can print your document on both sides of the paper, instead of just one side.
NOTE: Click the Advanced button on the Paper/Quality or Layout tab. From the Pages to Print dropdown menu select Print Odd Pages Only. Click OK to print. After the odd numbered pages of the document have been printed, remove the document from the output tray. Reload the paper in the input tray with the blank side facing up. Return to the Pages to Print drop-down menu and then select Print
Even Pages Only. Click OK to print.
• Print using black ink only
NOTE: If you want to print a black and white document using black ink only, click the Advanced button.
From the Print in Grayscale drop-down menu select Black Ink Only, then click the OK button. If you see
Black and White as an option on the Paper/Quality tab or the Layout tab, select it.
Print using the maximum dpi
Use maximum dots per inch (dpi) mode to print high-quality, sharp images on photo paper.
See technical specifications for the print resolution of the maximum dpi mode.
Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk space.
To print in Maximum dpi mode
1.
Make sure you have photo paper loaded in the input tray.
2.
On the File menu in your software application, click Print.
3.
Make sure the product is the selected printer.
4.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer, or Preferences.
5.
Click the Paper/Quality tab.
12 Print
6.
In the Media drop-down list, click Photo Paper, Best Quality.
NOTE: Photo Paper, Best Quality must be selected from the Media drop-down list on the Paper/
Quality tab to enable printing in maximum DPI.
7.
Click the Advanced button.
8.
In the Printer Features area, select Yes from the Print in Max DPI drop-down list.
9.
Select Paper Size from Paper/Output drop-down menu.
10.
Click OK to close the advanced options.
11.
Confirm Orientation on Layout tab, then click OK to print.
Print using the maximum dpi 13
Chapter 3
14 Print
4 Paper basics
You can load many different types and sizes of paper in the HP Deskjet 2510, including letter or A4 paper, photo paper, transparencies, and envelopes.
This section contains the following topics:
•
Recommended papers for printing
•
Recommended papers for printing
If you want the best print quality, HP recommends using HP papers that are specifically designed for the type of project you are printing.
Depending on your country/region, some of these papers might not be available.
ColorLok
• HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents. All papers with the ColorLok logo are independently tested to meet high standards of reliability and print quality, and produce documents with crisp, vivid color, bolder blacks, and dry faster than ordinary plain papers. Look for papers with the ColorLok logo in a variety of weights and sizes from major paper manufacturers.
HP Advanced Photo Paper
• This thick photo paper features an instant-dry finish for easy handling without smudging. It resists water, smears, fingerprints, and humidity. Your prints have a look and feel comparable to a store-processed photo. It is available in several sizes, including A4, 8.5 x 11 inch, 10 x 15 cm (4 x 6 inch) (with or without tabs), 13 x
18 cm (5 x 7 inch), and two finishes - glossy or soft gloss (satin matte). It is acid-free for longer lasting documents.
HP Everyday Photo Paper
• Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing. This affordable, photo paper dries quickly for easy handling. Get sharp, crisp images when you use this paper with any inkjet printer. It is available in semi-gloss finish in several sizes, including A4, 8.5 x 11 inch, and 10 x
15 cm (4 x 6 inch) (with or without tabs). For longer-lasting photos, it is acid-free.
HP Brochure Paper or HP Superior Inkjet Paper
• These papers are glossy-coated or matte-coated on both sides for two-sided use. They are the perfect choice for near-photographic reproductions and business graphics for report covers, special presentations, brochures, mailers, and calendars.
HP Premium Presentation Paper or HP Professional Paper
• These papers are heavy two-sided matte papers perfect for presentation, proposals, reports, and newsletters.
They are heavyweight for an impressive look and feel.
HP Bright White Inkjet Paper
• HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque enough for two-sided color usage with no show-through, which makes it ideal for newsletters, reports, and flyers. It features
ColorLok Technology for less smearing, bolder blacks, and vivid colors.
Paper basics 15
Chapter 4
HP Printing Paper
• HP Printing Paper is a high-quality multifunction paper. It produces documents that look and feel more substantial than documents printed on standard multipurpose or copy paper. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. It is acid-free for longer lasting documents.
HP Office Paper
• HP Office Paper is a high-quality multifunction paper. It is suitable for copies, drafts, memos, and other everyday documents. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. It is acid-free for longer lasting documents.
HP Iron-On Transfers
• HP Iron-on Transfers (for color fabrics or for light or white fabrics) are the ideal solution for creating custom Tshirts from your digital photos.
HP Premium Inkjet Transparency Film
• HP Premium Inkjet Transparency Film make your color presentations vivid and even more impressive. This film is easy to use and handle and dries quickly without smudging.
HP Photo Value Pack
• HP Photo Value Packs conveniently package original HP cartridges and HP Advanced Photo Paper to save you time and take the guesswork out of printing affordable professional photos with your HP Deskjet 2510.
Original HP inks and HP Advanced Photo Paper have been designed to work together so your photos are long lasting and vivid, print after print. Great for printing out an entire vacation’s worth of photos or multiple prints to share.
NOTE: At this time, some portions of the HP Web site are available in English only.
To order HP papers and other supplies, go to www.hp.com/buy/supplies . If prompted, choose your country/ region, follow the prompts to select your product, and then click one of the shopping links on the page.
Load media
▲ Select a paper size to continue.
Load full-size paper
a. Raise the input tray
Raise the input tray.
b. Lower the output tray
Lower the output tray and pull out the tray extender.
16 Paper basics
c. Slide paper-width guide to the left
Slide paper-width guide to the left.
d. Load paper.
Insert stack of paper into input tray with short edge forward and print side up.
Slide stack of paper down until it stops.
Slide paper-width guide to the right until it stops at edge of paper.
Load small-size paper
a. Raise the input tray
Raise the input tray.
Load media 17
Chapter 4
b. Lower the output tray
Lower the output tray and pull out the tray extender.
c. Slide paper-width guide to the left.
Slide paper-width guide to the left.
d. Load paper.
Insert stack of photo paper with short edge down and print side up.
Slide stack of paper forward until it stops.
NOTE: If the photo paper you are using has perforated tabs, load photo paper so that tabs are on top.
Slide paper-width guide to the right until it stops at edge of paper.
18 Paper basics
Load envelopes
a. Raise the input tray
Raise the input tray.
b. Lower the output tray
Lower the output tray and pull out the tray extender.
c. Slide paper-width guide to the left.
Slide paper-width guide to the left.
Remove all paper from the main input tray.
d. Load envelopes.
Insert one or more envelopes into far-right side of the input tray. The side to be printed on should face up. The flap should be on the left side and facing down.
Slide stack of envelopes down until it stops.
Slide paper-width guide to the right against stack of envelopes until it stops.
Load media 19
Chapter 4
20 Paper basics
5 Copy and scan
•
•
•
•
Copy documents or photos
NOTE: All documents are copied in normal quality print mode. You cannot change the print mode quality when copying.
▲ Do one of the following:
1-sided original to 1-sided copy
a. Load paper.
Load either small photo paper or full-size paper in the input tray.
b. Load original.
Lift lid on product.
Load original print side down on right front corner of glass.
Copy and scan 21
Chapter 5
Close lid.
c. Start copy.
Press Fit to Page to enlarge or reduce the original.
Press either Start Copy Black or Start Copy Color. Increase the number of copies by pressing the button multiple times.
Scan to a computer
NOTE: To scan to a computer, the HP Deskjet 2510 and computer must be connected and turned on.
▲ To scan to a computer:
Single page scan
a. Load original.
Lift lid on product.
22 Copy and scan
Load original print side down on right front corner of glass.
Close lid.
b. Start scan.
Start the scan job by either pressing Scan on the control panel or using the Printer Software. Click the
HP Deskjet 2510 series desktop icon to open the Printer Software.
NOTE: You can also access the Printer Software by clicking Start > Programs > HP > HP
Deskjet 2510 series > HP Deskjet 2510 series
Select Scan a Document or Photo. You will see scan options that you can select onscreen.
Tips for copy success
• Load your original print side down on the right front corner of the glass.
Tips for copy success 23
Chapter 5
• Press Fit to Page to enlarge or reduce the original image to fit the paper size on which you are printing.
Click here to go online for more information .
Tips for scan success
• Load your original print side down on the right front corner of the glass.
• Clean the scanner glass and make sure that there are no foreign materials adhering to it.
Click here to go online for more information .
24 Copy and scan
6 Work with cartridges
•
Check the estimated ink levels
•
•
•
•
Cartridge warranty information
Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to replace a cartridge. The ink supply level shows an estimate of the amount of ink remaining in the cartridges.
The printer's control panel display shows the estimated ink level directly. Refer to the below instructions for checking the detailed information about estimated ink level.
To check the ink levels from the Printer Software
1.
Click the HP Deskjet 2510 series desktop icon to open the Printer Software.
NOTE: You can also access the Printer Software by clicking Start > Programs > HP > HP Deskjet 2510 series > HP Deskjet 2510 series
2.
In the Printer Software, click Estimated Ink Levels.
NOTE: 1 If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in another printer, the ink level indicator might be inaccurate or unavailable.
NOTE: 2 Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.
NOTE: 3 Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the product and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information, see www.hp.com/go/inkusage .
Order ink supplies
Before ordering cartridges, locate the correct cartridge number.
Locate the cartridge number on the printer
▲ The cartridge number is located inside the cartridge door.
Work with cartridges 25
Chapter 6
Locate the cartridge number in the Printer Software
1.
Click the HP Deskjet 2510 series desktop icon to open the Printer Software.
NOTE: You can also access the Printer Software by clicking Start > Programs > HP > HP Deskjet 2510 series > HP Deskjet 2510 series
2.
In the Printer Software, click Shop and then click Shop For Supplies Online. The correct cartridge number will be automatically displayed when you use this link.
To order genuine HP supplies for the HP Deskjet 2510, go to www.hp.com/buy/supplies . If prompted, choose your country/region, follow the prompts to select your product, and then click one of the shopping links on the page.
NOTE: Ordering cartridges online is not supported in all countries/regions. If it is not available in your country/region, you may still view supplies information and print a list for reference when shopping at a local
HP reseller.
Related topics
•
Choose the right cartridges
HP recommends that you use original HP cartridges. Original HP cartridges are designed and tested with HP printers to help you easily produce great results, time after time.
Related topics
•
Replace the cartridges
To replace the cartridges
1.
Check power.
2.
Load paper.
3.
Remove cartridge.
a. Open cartridge door.
Wait for print carriage to move to center of the product.
b. Press down to release cartridge, then remove it from slot.
26 Work with cartridges
4.
Insert new cartridge.
a. Remove cartridge from packaging.
b. Remove plastic tape using pink pull tab.
c. Slide cartridge into slot until it clicks into place.
d. Close cartridge door.
5.
Align cartridges.
Replace the cartridges 27
Chapter 6
Use single-cartridge mode
Use the single-cartridge mode to operate the HP Deskjet 2510 with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode, the product can copy documents, copy photos, and print jobs from the computer.
NOTE: When the HP Deskjet 2510 operates in single-cartridge mode, a message is displayed on screen. If the message is displayed and two print cartridges are installed in the product, verify that the protective piece of plastic tape has been removed from each print cartridge. When plastic tape covers the print cartridge contacts, the product cannot detect that the print cartridge is installed.
Exit single-cartridge mode
Install two print cartridges in the HP Deskjet 2510 to exit single-cartridge mode.
Related topics
•
Cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP printing device. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty date has not been reached. The end of warranty date, in YYYY/MM format, may be found on the product as indicated:
For a copy of the HP Limited Warranty Statement for the printer, see the printed documentation that came with the product.
28 Work with cartridges
7 Connectivity
•
USB Connection (non-network connection)
•
USB Connection (non-network connection)
The HP Deskjet 2510 supports a rear USB 2.0 High Speed port for connection to a computer.
To connect the product with the USB cable
▲ Refer to the setup instructions that came with your product for information on connecting to a computer with a
USB cable.
NOTE: Do not connect the USB cable to the product until you are prompted to do so.
If the printer software has been installed, the printer will operate as a plug and play device. If the software has not been installed, insert the CD that came with the device and follow the onscreen instructions.
Connect a new printer
Refer to the below instructions for connecting a printer to the computer, which has the software installed but not connected to the printer.
Connect a new printer
1.
From the computer’s start menu select All Programs or Programs, and then select HP.
2.
Select HP Deskjet 2510 All-in-One series.
3.
Select Printer Setup & Software.
4.
Select Connect a new printer. Follow the onscreen instructions.
Connectivity 29
Chapter 7
30 Connectivity
8 Solve a problem
This section contains the following topics:
•
•
•
•
Improve print quality
1.
Make sure you are using genuine HP cartridges.
2.
Check the Printer Software settings to make sure you have selected the appropriate paper type and print quality from the Media drop-down list.
3.
Check the estimated ink levels to determine if the cartridges are low on ink. For more information, see
Check the estimated ink levels . If the print cartridges are low on ink consider replacing them.
4.
Align the printer cartridges.
To align the cartridges from the Printer Software
NOTE: Aligning the cartridges ensures high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same print cartridge, the
HP All-in-One will not prompt you to align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.
a. Load letter or A4 unused plain white paper into the input tray.
b. In the Printer Software, click Print & Scan and then click Maintain Your Printer to access the HP
Deskjet 2510 series Toolbox.
c. The HP Deskjet 2510 series Toolbox appears.
d. Click the Device Services tab.
e. Click Align Ink Cartridges tab. The product prints an alignment sheet.
f. Load the cartridge alignment sheet print side down on the right front corner of the glass.
g. Press the Start Copy Black button. The product aligns the cartridges. Recycle or discard the cartridge alignment sheet.
5.
Print a diagnostics page if the cartridges are not low on ink.
To print a diagnostics page
a. Load letter or A4 unused plain white paper into the input tray.
b. In the Printer Software, click Print & Scan and then click Maintain Your Printer to access the HP
Deskjet 2510 series Toolbox.
c. Click the Device Reports tab.
d. Click Print Diagnostic Information to print a diagnostics page. Review the blue, magenta, yellow, and black boxes on the diagnostics page. If you are seeing streaks in the color and black boxes, or no ink in portions of the boxes, then automatically clean the cartridges
Solve a problem 31
Chapter 8
6.
Clean the print cartridges automatically, if the diagnostic page shows steaks or missing portions of the color and black boxes.
To clean the cartridges automatically
a. Load letter or A4 unused plain white paper into the input tray.
b. In the Printer Software, click Print & Scan and then click Maintain Your Printer to access the HP
Deskjet 2510 series Toolbox.
c. Click the Device Services tab.
d. Click Clean Ink Cartridges. Follow the onscreen instructions.
If the above solutions do not resolve the problem, click here for more online troubleshooting .
Clear a paper jam
Clear a paper jam.
To clear a paper jam
1.
Press the cancel button to try to clear the jam automatically. If this does not work, the paper jam will need to be cleared manually.
2.
Locate the paper jam
Input tray
• If the paper jam is located near the back input tray, pull the paper gently out of the input tray.
32 Solve a problem
Output tray
• If the paper jam is located near the front output tray, pull the paper gently out of the output tray.
• You may need to open the carriage door and slide the print carriage to the right to access the paper jam.
Inside of printer
• If the paper jam is located inside the printer, open the cleanout door located on the bottom of the printer.
Press tabs on both sides of the cleanout door.
• Remove jammed paper.
• Close the cleanout door. Gently push the door towards the printer until both latches snap into place.
3.
Press the Start Copy Black or Start Copy Color button on the control panel to continue the current job.
Clear a paper jam 33
Chapter 8
If the above solutions do not resolve the problem, click here for more online troubleshooting .
Prevent paper jams
• Do not overfill the input tray.
• Remove printed papers from the output tray frequently.
• Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.
• Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input tray must be the same size and type.
• Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-width guide does not bend the paper in the input tray.
• Do not force paper too far forward in the input tray.
If the above solutions do not resolve the problem, click here for more online troubleshooting .
Unable to print
If you're having trouble printing, you can download the HP Printing Diagnostic Utility, which can troubleshoot this issue for you automatically. To get the utility, click the appropriate link:
NOTE: The HP Printing Diagnostic Utility may not be available in all languages.
Take me to the HP Printing Diagnostic Utility download page (32-bit Windows).
Take me to the HP Printing Diagnostic Utility download page (64-bit Windows).
Resolve print issues
NOTE: Make sure that the printer is turned on and that there is paper in the tray. If you are still unable to print, try the following in order:
1.
Check for error messages and resolve.
2.
Disconnect and reconnect the USB cable.
3.
Verify that the product is not paused or offline.
To verify that the product is not paused or offline
a. Depending upon your operating system, do one of the following:
• Windows 7: From the Windows Start menu, click Devices and Printers.
• Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.
• Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and
Faxes.
b. Either double-click the icon for your product or right-click the icon for your product and select See what’s
printing to open the print queue.
c. On the Printer menu, make sure there are no check marks next to Pause Printing or Use Printer
Offline.
d. If you made any changes, try to print again.
4.
Verify that the product is set as the default printer.
To verify that the product is set as the default printer
a. Depending upon your operating system, do one of the following:
• Windows 7: From the Windows Start menu, click Devices and Printers.
• Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.
• Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and
Faxes.
b. Make sure the correct product is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
34 Solve a problem
c. If the wrong product is set as the default printer, right-click the correct product and select Set as Default
Printer.
d. Try using your product again.
5.
Restart the print spooler.
To restart the print spooler
a. Depending upon your operating system, do one of the following:
Windows 7
• From the Windows Start menu, click Control Panel, System and Security, and then Administrative
Tools.
• Double-click Services.
• Right-click the Print Spooler, and then click Properties.
• On the General tab, next to Startup type, make sure that Automatic is selected.
• If the service is not already running, under Service status, click Start, and then click OK.
Windows Vista
• From the Windows Start menu, click Control Panel, System and Maintenance, Administrative
Tools.
• Double-click Services.
• Right-click the Print Spooler service, and then click Properties.
• On the General tab, next to Startup type, make sure that Automatic is selected.
• If the service is not already running, under Service status, click Start, and then click OK.
Windows XP
• From the Windows Start menu, right click My Computer.
• Click Manage, and then click Services and Applications.
• Double-click Services, and then select Print Spooler.
• Right-click Print Spooler, and click Restart to restart the service.
b. Make sure the correct product is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
c. If the wrong product is set as the default printer, right-click the correct product and select Set as Default
Printer.
d. Try using your product again.
6.
Restart the computer.
7.
Clear the print queue.
To clear the print queue
a. Depending upon your operating system, do one of the following:
• Windows 7: From the Windows Start menu, click Devices and Printers.
• Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.
• Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and
Faxes.
b. Double-click the icon for your product to open the print queue.
c. On the Printer menu, click Cancel all documents or Purge Print Document, and then click Yes to confirm.
d. If there are still documents in the queue, restart the computer and try printing again after the computer has restarted.
e. Check the print queue again to make sure it is clear, and then try to print again.
If the print queue is not clear, or if it is clear but jobs are still failing to print, proceed to the next solution.
If the above solutions do not resolve the problem, click here for more online troubleshooting .
Unable to print 35
Chapter 8
Clear the print carriage
Remove any objects, such as paper, that are blocking the print carriage.
NOTE: Do not use any tools or other devices to remove jammed paper. Always use caution when removing jammed paper from inside the product.
Click here to go online for more information .
Identify a defective cartridge
If both the tri-color and black ink level indicators are blinking, and the Power light is on, both cartridges may still have tape on, or are missing. First make sure that the pink tape has been removed from both cartridges, and that both cartridges are installed. If both ink level indicators are still blinking, then one or both cartridges may be defective. To determine if one cartridge is defective do the following:
1.
Remove black cartridge.
2.
Close cartridge door.
3.
If the Power light blinks, the tri-color cartridge should be replaced. If the Power light does not blink, replace the black cartridge.
Prepare the trays
Open output tray
▲ Output tray must be open to begin printing.
Close cartridge door
▲ Cartridge door must be closed to begin printing.
Click here to go online for more information .
36 Solve a problem
Resolve copy and scan issues
Click here to go online for more information .
HP support
•
•
•
•
Register the product
By taking just a few quick minutes to register, you can enjoy quicker service, more efficient support, and product support alerts. If you did not register your printer while installing the software, you can register now at http:// www.register.hp.com
.
Support process
If you have a problem, follow these steps:
1.
Check the documentation that came with the product.
2.
Visit the HP online support Web site at www.hp.com/support . HP online support is available to all HP customers. It is the fastest source for up-to-date product information and expert assistance and includes the following features:
• Fast access to qualified online support specialists
• Software and driver updates for the product
• Valuable product and troubleshooting information for common problems
• Proactive product updates, support alerts, and HP newsgrams that are available when you register the product
3.
Call HP support. Support options and availability vary by product, country/region, and language.
HP support by phone
Phone support options and availability vary by product, country/region, and language.
This section contains the following topics:
•
•
•
•
After the phone support period
Phone support period
One year of phone support is available in North America, Asia Pacific, and Latin America (including Mexico). To determine the duration of phone support in Europe, the Middle East, and Africa, go to www.hp.com/support .
Standard phone company charges apply.
Placing a call
Call HP support while you are in front of the computer and the product. Be prepared to provide the following information:
• Product name (located on product, such as HP Deskjet 2510, HP Deskjet Ink Advantage 2515, etc.)
• Product number (located inside the cartridge access door)
HP support 37
Chapter 8
• Serial number (located on the back or bottom of the product)
• Messages that appear when the situation occurs
• Answers to these questions:
◦ Has this situation happened before?
◦ Can you re-create it?
◦ Did you add any new hardware or software to your computer at about the time that this situation began?
◦ Did anything else occur prior to this situation (such as a thunderstorm, product was moved, etc.)?
Support phone numbers
For the most current HP list of telephone support numbers and call costs information, see www.hp.com/support .
After the phone support period
After the phone support period, help is available from HP at an additional cost. Help may also be available at the
HP online support Web site: www.hp.com/support . Contact your HP dealer or call the support phone number for your country/region to learn more about support options.
Additional warranty options
Extended service plans are available for the HP Deskjet 2510 at additional costs. Go to www.hp.com/support , select your country/region and language, then explore the services and warranty area for information about the extended service plans.
38 Solve a problem
9 Technical information
The technical specifications and international regulatory information for the HP Deskjet 2510 are provided in this section.
For additional specifications, see the printed documentation that came with the HP Deskjet 2510.
This section contains the following topics:
•
•
•
Environmental product stewardship program
•
Notice
Specifications
Technical specifications for the HP Deskjet 2510 are provided in this section. For more technical specifications, see the Product Data Sheet at www.hp.com/support .
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
•
•
System requirements
For information about future operating system releases and support, visit the HP online support Web site at www.hp.com/support .
Technical information 39
Chapter 9
40
Environmental specifications
• Recommended operating temperature range: 15 ºC to 32 ºC (59 ºF to 90 ºF)
• Allowable operating temperature range: 5 ºC to 40 ºC (41 ºF to 104 ºF)
• Humidity: 15% to 80% RH non-condensing; 28 ºC maximum dewpoint
• Non-operating (Storage) temperature range: –40 ºC to 60 ºC (–40 ºF to 140 ºF)
• In the presence of high electromagnetic fields, it is possible the output from the HP Deskjet 2510 may be slightly distorted
• HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields
Input tray capacity
Plain paper sheets (80 g/m 2 [20lb]): Up to 50
Envelopes: Up to 5
Index cards: Up to 20
Photo paper sheets: Up to 20
Output tray capacity
Plain paper sheets (80 g/m 2 [20lb]): Up to 30
Envelopes: Up to 5
Index cards: Up to 10
Photo paper sheets: Up to 10
Paper size
For a complete list of supported media sizes, see the printer software.
Paper weights
Plain Paper: 64 to 90 g/m² (16 to 24 lb)
Envelopes: 75 to 90 g/m² (20 to 24 lb)
Cards: Up to 200 g/m² (110-lb index maximum)
Photo Paper: Up to 280 g/m² (75 lb)
Print specifications
• Print speeds vary according to the complexity of the document
• Method: drop-on-demand thermal inkjet
• Language: PCL3 GUI
Copy specifications
• Digital image processing
• Copy speeds vary according to the complexity of the document and model
Scan specifications
• Resolution: up to 1200 x 1200 ppi optical
For more information about ppi resolution, see the scanner software.
• Color: 24-bit color, 8-bit grayscale (256 levels of gray)
• Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)
Print resolution
Draft mode
• Color Input/Black Render: 300x300dpi
• Output (Black/Color): Automatic
Normal mode
• Color Input/Black Render: 600x300dpi
• Output (Black/Color): Automatic
Technical information
Plain-Best mode
• Color Input/Black Render: 600x600dpi
• Output: 600x1200dpi (Black), Automatic (Color)
Photo-Best mode
• Color Input/Black Render: 600x600dpi
• Output (Black/Color): Automatic
Max DPI mode
• Color Input/Black Render: 1200x1200dpi
• Output: Automatic (Black), 4800x1200 optimized dpi (Color)
Power specifications
0957-2286
• Input voltage: 100-240Vac (+/- 10%)
• Input frequency: 50/60 Hz (+/- 3Hz)
0957-2290
• Input voltage: 200-240Vac (+/- 10%)
• Input frequency: 50/60 Hz (+/- 3Hz)
NOTE: Use only with the power adapter supplied by HP.
Cartridge yield
Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.
Acoustic information
If you have Internet access, you can get acoustic information from the HP Web site. Go to: www.hp.com/support .
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner. Design for recycling has been incorporated into this product. The number of materials has been kept to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been designed to separate easily.
Fasteners and other connections are easy to locate, access, and remove using common tools. High priority parts have been designed to access quickly for efficient disassembly and repair.
For more information, visit HP’s Commitment to the Environment Web site at: www.hp.com/hpinfo/globalcitizenship/environment/index.html
.
This section contains the following topics:
•
•
•
•
•
•
HP inkjet supplies recycling program
•
•
•
•
Disposal of waste equipment by users in private households in the European Union
•
•
Toxic and hazardous substance table (China)
•
Restriction of hazardous substance (Ukraine)
Eco-Tips
HP is committed to helping customers reduce their environmental footprint. HP has provided the Eco-Tips below to help you focus on ways to assess and reduce the impact of your printing choices. In addition to specific
Environmental product stewardship program 41
Chapter 9 features in this product, please visit the HP Eco Solutions web site for more information on HP’s environmental initiatives.
www.hp.com/hpinfo/globalcitizenship/environment/
Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP Web site at: www.hp.com/go/msds
Recycling program
HP offers an increasing number of product return and recycling programs in many countries/regions, and partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. For more information regarding recycling of HP products, please visit: www.hp.com/hpinfo/globalcitizenship/environment/recycle/
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in many countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more information, go to the following Web site: www.hp.com/hpinfo/globalcitizenship/environment/recycle/
Power consumption
Hewlett-Packard printing and imaging equipment marked with the ENERGY STAR® logo is qualified to the U.S.
Environmental Protection Agency’s ENERGY STAR specifications for imaging equipment. The following mark will appear on ENERGY STAR qualified imaging products:
Additional ENERGY STAR qualified imaging product model information is listed at: www.hp.com/go/energystar
Auto Power-Off
Auto Power-Off is automatically enabled by default when you turn on the printer. When Auto Power-Off is enabled, the printer will automatically turn off after two hours of inactivity to help reduce energy use. You can change the Auto Power-Off setting from the printer software. Once you change the setting, the printer will
42 Technical information
maintain the setting that you choose. Auto Power-Off turns the printer off completely, so you must use the power button to turn the printer back on.
To enable or disable Auto Power-Off
1.
Click the HP Deskjet 2510 series desktop icon to open the Printer Software.
NOTE: You can also access the Printer Software by clicking Start > Programs > HP > HP Deskjet 2510 series > HP Deskjet 2510 series
2.
In the Printer Software, click Print & Scan and then click Maintain Your Printer to access the HP Deskjet
2520 series Toolbox.
3.
The HP Deskjet 2520 series Toolbox appears.
4.
Click Advanced Settings. Follow the onscreen instructions.
TIP: If you are printing through a wireless or Ethernet connection over a network, Auto Power-Off should be disabled to ensure that print jobs do not get lost. Even when Auto Power-Off is disabled, the printer enters a
Sleep mode after five minutes of inactivity to help reduce energy use.
Sleep mode
• Power usage is reduced while in Sleep mode.
• After initial setup of printer, the printer will enter Sleep mode after five minutes of inactivity.
• The time to Sleep mode cannot be changed.
Environmental product stewardship program 43
Chapter 9
Disposal of waste equipment by users in private households in the European
Union
Chemical Substances
HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European
Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/ reach .
44 Technical information
Toxic and hazardous substance table (China)
Restriction of hazardous substance (Ukraine)
Regulatory notices
The HP Deskjet 2510 meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
•
Regulatory model identification number
•
•
•
VCCI (Class B) compliance statement for users in Japan
•
Notice to users in Japan about the power cord
•
European Union Regulatory Notice
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory
Model Number for your product is VCVRA-1221. This regulatory number should not be confused with the marketing name (HP Deskjet 2510 All-in-One series, etc.) or product numbers (CX027A, CX027B, etc.).
Regulatory notices 45
Chapter 9
FCC statement
Notice to users in Korea
46 Technical information
VCCI (Class B) compliance statement for users in Japan
Notice to users in Japan about the power cord
European Union Regulatory Notice
Products bearing the CE marking comply with the following EU Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• Ecodesign Directive 2009/125/EC, where applicable
CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP.
If this product has telecommunications functionality, it also complies with the essential requirements of the following EU Directive:
• R&TTE Directive 1999/5/EC
Compliance with these directives implies conformity to applicable harmonized European standards (European
Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family and available (in English only) either within the product documentation or at the following web site: www.hp.com/go/ certificates (type the product number in the search field).
The compliance is indicated by one of the following conformity markings placed on the product:
For non-telecommunications products and for EU harmonized telecommunications products, such as Bluetooth® within power class below 10mW.
For EU non-harmonized telecommunications products (If applicable, a 4-digit notified body number is inserted between CE and !).
Please refer to the regulatory label provided on the product.
The telecommunications functionality of this product may be used in the following EU and EFTA countries:
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Regulatory notices 47
Chapter 9
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom.
The telephone connector (not available for all products) is intended for connection to analogue telephone networks.
Products with wireless LAN devices
• Some countries may have specific obligations or special requirements about the operation of Wireless LAN networks such as indoor use only or restrictions of the channels available. Please make sure that the country settings of the wireless network are correct.
France
• For 2.4-GHz Wireless LAN operation of this product, certain restrictions apply: This product may be used indoors for the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 to 13). For outdoor use, only the
2400-MHz to 2454-MHz frequency band (channels 1 to 7) may be used. For the latest requirements, see www.arcep.fr
.
The point of contact for regulatory matters is:
Hewlett-Packard GmbH, Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, GERMANY
48 Technical information
Index
A
C
copy
customer support
E
environment
Environmental product stewardship
environmental specifications 40
P
paper
phone support period
R
recycle
regulatory notices regulatory model identification
S
scan
T
technical information
W
49
50
دانلود
پیوند عمومی به روز شد
پیوند عمومی به چت شما به روز شده است. You may view and manage your chat links after registration here.
پیوند عمومی سند
تبلیغات