Spedal W Card Smart Locator User Manual

072C0806-EN
1. Device Powering On
2. Device Powering Off
3.Device Reset
5.Adding New Device
4.Device Quick Pairing
didi
User Manual
Share My Location
Add MagSafe Accessory
double-press
Press the function key once briefly. The device will emit a prompt
tone, indicating that it is powered on.
hold on the third press
Press the function key twice briefly, then press and hold the
function key for 5 seconds on the third press. The device will emit
two beeps, indicating that it is powered off.
* If the device is not paired within 10 minutes after
powering on, it will automatically shut down.
quadruple-press
hold on the fifth press
After removing the device from the Find My app, press the
function key 4 times briefly, then press and hold the function key
for 5 seconds on the 5th press. The device will emit a confirmation
tone, indicating a successful reset and is ready to be bound to a
new Apple ID.
VIDEO
4.1.Open the Camera app on your iPhone and scan the QR code.
PHOTO
Add Other Item
* Keep the device within Bluetooth range during the
operation.
Items
PORTRAIT
4.2.Tap the pairing link that
appears on the screen to
automatically redirect to the
device setup interface. For
detailed setup instructions,
refer to Section 5.5.
* Ensure the device has been removed from the original
Apple ID's Find My network, otherwise the reset will fail.
6.Track Item
5.1.Press the function key
once briefly to power on the
device.
Tag
Name Item
Choose an Emoji
Connect
Continue
Continue
Agree
5.7.Enter a custom device
name, then tap "Continue".
5.8.Select a unique emoji for
the
device,
then
tap
"Continue".
5.9.Verify the Apple ID linked
to the device, then tap
"Agree".
Finishing Setup
TAG
TAG
5.10.Wait for the system to
complete the setup.
Play Sound
Directions
Play Sound
Directions
Play Sound
Directions
5.5.Wait for your iPhone to
automatically detect the
device.
TAG
*******
Share Item
+
Add Person
TAG
Directions
Items
+
Share Item
Tag
Add Person
Shared with ***
Finish
5.11.Confirm the displayed
device name and icon, then
tap "Finish" to finish the
pairing process.
5.4.Select "Add Other Item".
Items I Shared
Lost Item
Show Contact Info
Off >
Allow others to get in touch
Share Item Location
Off >
Allow others to lacate this item
Continue
Share Item
5.6.Tap "Connect".
+
Share
My Items
TAG
Items
8.Lost Item
To：
TAG
Items
TAG
5.3.Navigate to the "Items"
tab and tap the "+" button.
Share Item
TAG
**********
Enter name
5.2.Open the Find My app on
your iPhone.
+
7.Share Item
di~di~di~
This Item is Linkede
To Your Apple Account
Searching Items...
Add AirTag
Find My
6.1.In the Items tab of the
Find My app, select the target
device you wish to locate.
6.2.Tap the "Play Sound" button, and the device will emit a
continuous alert tone. Tap "Stop Sound" to silence the tone once
the device is found.
* The sound tracking feature requires the device to be
within Bluetooth range.
Share Item
6.3.Tap the "Directions" button to automatically open the Maps
app and display real-time navigation to the device's location.
* Navigation
connection.
depends
on
GPS
signal
and
network
7.1.On the Shared Items
screen, tap "Add Person" to
enter the sharing instructions
page.
7.2.On
the
sharing
instructions
page,
tap
"Continue" to proceed to the
contact selection screen.
7.3.Select the contact(s) you
wish to share with, then tap
"Share" to send the sharing
request.
7.4.Once
the
recipient
accepts
the
sharing
invitation, the shared item
will appear under "Items I
Shared".
8.1.Under the "Lost Item"
option, tap "Show Contact
Info" to mark the item as lost.
9.Notifications
Show Contact Info
Next
Next
Phone Number
Email Address
********
********
TAG
Share Item
Share Item
Add Person
Add Person
Show Contact Info
********
Lost Item
On >
Share Item Location
Off >
Allow others to lacate this item
Continue
Done
Notify When Left Behind
8.3.Enter a valid phone number or email address for the finder to
contact you, then tap "Next".
*
"Notify
When
Left
Behind" alerts only trigger
when your iPhone and
device disconnect (out of
Bluetooth range).
New Location
10.Rename Item
Share Item Location
Off >
Allow others to lacate this item
8.5.Once set up, "Show
Contact Info" will display as
Enabled, with your contact
method shown below.
8.6.To share the item's
location for assistance, tap
"Share Item Location" and
select temporary sharing.
11.Remove Item
TAG
Done
Umbrella
Notifications
Wallet
Notify When Found
Notify When Left Behind Off >
Manufacturer
********
Serial Number
********
Firmware
Custom Name
TAG
Tag
TAG
********
Notify When Found
Notify When Left Behind Off >
Manufacturer
********
Serial Number
********
Firmware
Rename Item
Rename Item
Remove Item
Remove Item
10.1.Tap "Rename Item".
10.2.Select the device category,
change the emoji icon, modify
the device name, then tap
"Done" to save settings.
Share Link
8.7.Confirm sharing settings,
then tap "Continue" to
proceed.
8.8.The system will generate
a unique sharing link.
When an unbound device is detected moving with you for an
extended period (10 minutes to several hours), the system will
automatically send a safety alert to prevent malicious tracking.
Notifications
Model
Continue
12.Anti-Tracking
Safety Alerts
Rename Item
Model
9.4.Use "New Location"
to set frequently visited
places (e.g., home or
office) as safe zones to
avoid false alerts.
8.4.Enable
"Notify
When
Found", verify your contact
details, then tap "Show
Information" to complete
setup.
Lost Item
Show Contact Info
Item Location Ready
To Share
On >
Show Information
* Requires iOS 15 or later.
Notify When Left
Behind
Show Contact Info
********
Remove Item？
Tag
********
11.1.Tap "Remove Item".
TAG
Remove
11.2.The system will display
the device information to be
removed. Verify the device
name and icon, then tap
"Remove" to confirm.
* Requires iOS 14.5 or later.
13.Battery Replacement
For models with visible screws: Use an appropriate screwdriver to
remove all fastening screws.For screwless models: Insert a plastic
opening tool along the seam and apply even pressure to separate
the housing.Note for waterproof models: The housing edge may
have a waterproof gasket - handle with care to avoid damage.
Use non-conductive tweezers to remove the old battery.Install
the new battery (must be CR2032 3V lithium type):"+" pole
(smooth convex side/printed with "+CR2032") must face
upward."-" pole (flat/slightly concave metal side) should contact
the bottom electrode.
* Location updates rely on
Apple's global Find My
network
and
may
experience brief delays.
TAG
Add Person
Share Item Location
Lost Item
********
Find My
TAG
Share Item
Show Contact Info
Notify When Found
8.2.On
the
instructions
screen, tap "Continue" to
proceed to settings.
Done
TAG
Lost Item
********
Show Contact Info
********
On >
Share Item Location
Expires MM DD, YYYY
On >
On >
Share Item Location
Expires MM DD, YYYY
On >
Done
Notify When Left Behind
Lost Item
Show Contact Info
********
On >
Share Item Location
Expires MM DD, YYYY
On >
Stop Share Item Location
8.11.To cancel settings:Tap "Remove Contact Info" to deactivate
lost mode.Tap "Stop Share Item Location" to immediately end
location sharing.
Notify When Left
Behind
New Location
Notifications
Notify When Found
8.10.You
will
receive
a
notification if someone finds
the item and uses your
contact information.
TAG
Share Item Location
Notifications
Remove Contact Info
8.9.After setup, "Share Item
Location" will display as
Enabled, with the link's
expiration date shown below.
Show Contact Info
********
*
Notifications
require
detection by other Apple
devices.
Notify When Left
Behind
Notify When Found
Off >
9.1.With "Notify When Found" enabled, if your device moves out of
range and is detected by nearby Apple devices, you will receive an
alert with its latest location.
Notify When Left
Behind
Off >
9.2.Tap "Notify When Left
Behind"
to
access
the
settings menu.
9.3.Enable "Notify When Left
Behind" to receive immediate
notifications on your iPhone if
you accidentally leave your
device
behind
and
it
disconnects.
15.FCC Regulatory Compliance Information
Align all clips/screw holes, first securing the main fastening points
before
gradually
pressing
the
perimeter
closed.For
screw-fastened models: Reinstall screws in their original positions
and tighten moderately.Ensure complete housing seal. For
waterproof models, verify gasket integrity.
Works with Apple Find My Badge Statement
FCC Interference Statement
FCC Compliance Statement
14.Apple Find My Network
Integration Notice
Use of the “Works with Apple Find My” badge means that this
product has been designed to work specifically with the
technology identified in the badge and has been certified by the
product manufacturer to meet Apple’s specifications for the Find
My network.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Apple Find My Network Support
The Apple Find My network offers a simple and secure way to
locate compatible personal items using the Find My app on your
iPhone, iPad, or Mac. Once paired with the Find My app, your
compatible product can be displayed alongside your Apple
devices.
If your item is lost, you can place it in Lost Mode to display a
message and contact information to anyone who may find it. The
Find My network is encrypted and anonymous, so no one — not
even Apple or the manufacturer of your personal item — can view
its location.
Trademark Information
Apple, Apple Watch, iPad, iPadOS, Mac, and macOS are
trademarks of Apple Inc., registered in the U.S. and other
countries and regions.
iOS is a trademark or registered trademark of Cisco in the U.S.
and other countries and is used under license.
Note: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment.
RF Exposure Statement
This device meets the general RF exposure requirements for portable use.
No specific RF exposure evaluation is required due to its low transmission power.
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
!
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
WARNING
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns,
perforation of soft tissue, and death. Severe
burns can occur within 2 hours of ingestion.
Seek medical attention immediately.
Made In China
">