Epson Progression computer Setup Guide

Below you will find brief information for computer Progression. The computer Progression provides a setup guide to help you connect the monitor, keyboard, mouse and printer to the computer. It also describes how to run the SETUP program to define the computer’s configuration before you use your computer, and also provides instructions on how to install an optional math coprocessor.

PDF
Document
Epson computer Progression, Setup Guide | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Set up a computer

  • Connect monitor

  • Connect keyboard

  • Connect mouse

  • Connect printer

  • Install optional math coprocessor

  • Run SETUP program

  • Define computer’s configuration

  • Install operating system and software

Frequently asked questions

The SETUP program is stored in the computer’s read-only memory (ROM), and allows you to verify or change the computer’s configuration.

You need to run the SETUP program the first time you use your computer, and you may need to run it again later if you change some part of your configuration.

The SETUP program is stored in your computer’s read-only memory (ROM).

You can change settings such as the current date and time, the processor speed, the fast boot option, and the location of the video BIOS.

To save your changes, press the F10 key.

The changes you make to the SETUP program are saved in a special area of memory called CMOS RAM, which is backed up by a battery, so they will not be erased when you turn off the computer.

Preparing document for printing…
0%